staging: comedi: addi-data: remove the boardinfo #ifdef'ery

Move the boardinfo for each addi-data driver from addi_common.c to
the individual driver files. This removes the need #ifdef'ery.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/addi_apci_035.c

@@ -13,6 +13,33 @@
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci035.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci035",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x0300,
+		.i_IorangeBase0		= 127,
+		.i_IorangeBase1		= APCI035_ADDRESS_RANGE,
+		.i_PCIEeprom		= 1,
+		.pc_EepromChip		= ADDIDATA_S5920,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_AiMaxdata		= 0xff,
+		.pr_AiRangelist		= &range_apci035_ai,
+		.i_Timer		= 1,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.ui_MinDelaytimeNs	= 100000,
+		.interrupt		= v_APCI035_Interrupt,
+		.reset			= i_APCI035_Reset,
+		.ai_config		= i_APCI035_ConfigAnalogInput,
+		.ai_read		= i_APCI035_ReadAnalogInput,
+		.timer_config		= i_APCI035_ConfigTimerWatchdog,
+		.timer_write		= i_APCI035_StartStopWriteTimerWatchdog,
+		.timer_read		= i_APCI035_ReadTimerWatchdog,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA,  0x0300) },
 	{ 0 }

drivers/staging/comedi/drivers/addi_apci_1032.c

@@ -11,6 +11,24 @@
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci1032.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci1032",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x1003,
+		.i_IorangeBase0		= 4,
+		.i_IorangeBase1		= APCI1032_ADDRESS_RANGE,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_93C76,
+		.i_NbrDiChannel		= 32,
+		.interrupt		= v_APCI1032_Interrupt,
+		.reset			= i_APCI1032_Reset,
+		.di_config		= i_APCI1032_ConfigDigitalInput,
+		.di_read		= i_APCI1032_Read1DigitalInput,
+		.di_bits		= i_APCI1032_ReadMoreDigitalInput,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1003) },
 	{ 0 }

drivers/staging/comedi/drivers/addi_apci_1500.c

@@ -11,6 +11,35 @@
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci1500.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci1500",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA_OLD,
+		.i_DeviceId		= 0x80fc,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= APCI1500_ADDRESS_RANGE,
+		.i_IorangeBase2		= 4,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.i_NbrDiChannel		= 16,
+		.i_NbrDoChannel		= 16,
+		.i_DoMaxdata		= 0xffff,
+		.i_Timer		= 1,
+		.interrupt		= v_APCI1500_Interrupt,
+		.reset			= i_APCI1500_Reset,
+		.di_config		= i_APCI1500_ConfigDigitalInputEvent,
+		.di_read		= i_APCI1500_Initialisation,
+		.di_write		= i_APCI1500_StartStopInputEvent,
+		.di_bits		= i_APCI1500_ReadMoreDigitalInput,
+		.do_config		= i_APCI1500_ConfigDigitalOutputErrorInterrupt,
+		.do_write		= i_APCI1500_WriteDigitalOutput,
+		.do_bits		= i_APCI1500_ConfigureInterrupt,
+		.timer_config		= i_APCI1500_ConfigCounterTimerWatchdog,
+		.timer_write		= i_APCI1500_StartStopTriggerTimerCounterWatchdog,
+		.timer_read		= i_APCI1500_ReadInterruptMask,
+		.timer_bits		= i_APCI1500_ReadCounterTimerWatchdog,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA_OLD, 0x80fc) },
 	{ 0 }

drivers/staging/comedi/drivers/addi_apci_1516.c

@@ -11,6 +11,31 @@
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci1516.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci1516",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x1001,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= APCI1516_ADDRESS_RANGE,
+		.i_IorangeBase2		= 32,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_S5920,
+		.i_NbrDiChannel		= 8,
+		.i_NbrDoChannel		= 8,
+		.i_Timer		= 1,
+		.reset			= i_APCI1516_Reset,
+		.di_read		= i_APCI1516_Read1DigitalInput,
+		.di_bits		= i_APCI1516_ReadMoreDigitalInput,
+		.do_config		= i_APCI1516_ConfigDigitalOutput,
+		.do_write		= i_APCI1516_WriteDigitalOutput,
+		.do_bits		= i_APCI1516_ReadDigitalOutput,
+		.timer_config		= i_APCI1516_ConfigWatchdog,
+		.timer_write		= i_APCI1516_StartStopWriteWatchdog,
+		.timer_read		= i_APCI1516_ReadWatchdog,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1001) },
 	{ 0 }

drivers/staging/comedi/drivers/addi_apci_1564.c

@@ -11,6 +11,34 @@
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci1564.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci1564",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x1006,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= APCI1564_ADDRESS_RANGE,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_93C76,
+		.i_NbrDiChannel		= 32,
+		.i_NbrDoChannel		= 32,
+		.i_DoMaxdata		= 0xffffffff,
+		.i_Timer		= 1,
+		.interrupt		= v_APCI1564_Interrupt,
+		.reset			= i_APCI1564_Reset,
+		.di_config		= i_APCI1564_ConfigDigitalInput,
+		.di_read		= i_APCI1564_Read1DigitalInput,
+		.di_bits		= i_APCI1564_ReadMoreDigitalInput,
+		.do_config		= i_APCI1564_ConfigDigitalOutput,
+		.do_write		= i_APCI1564_WriteDigitalOutput,
+		.do_bits		= i_APCI1564_ReadDigitalOutput,
+		.do_read		= i_APCI1564_ReadInterruptStatus,
+		.timer_config		= i_APCI1564_ConfigTimerCounterWatchdog,
+		.timer_write		= i_APCI1564_StartStopWriteTimerCounterWatchdog,
+		.timer_read		= i_APCI1564_ReadTimerCounterWatchdog,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1006) },
 	{ 0 }

drivers/staging/comedi/drivers/addi_apci_16xx.c

@@ -11,6 +11,34 @@
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci16xx.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci1648",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x1009,
+		.i_IorangeBase0		= 128,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.i_NbrTTLChannel	= 48,
+		.reset			= i_APCI16XX_Reset,
+		.ttl_config		= i_APCI16XX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI16XX_InsnBitsReadTTLIO,
+		.ttl_read		= i_APCI16XX_InsnReadTTLIOAllPortValue,
+		.ttl_write		= i_APCI16XX_InsnBitsWriteTTLIO,
+	}, {
+		.pc_DriverName		= "apci1696",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x100A,
+		.i_IorangeBase0		= 128,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.i_NbrTTLChannel	= 96,
+		.reset			= i_APCI16XX_Reset,
+		.ttl_config		= i_APCI16XX_InsnConfigInitTTLIO,
+		.ttl_bits		= i_APCI16XX_InsnBitsReadTTLIO,
+		.ttl_read		= i_APCI16XX_InsnReadTTLIOAllPortValue,
+		.ttl_write		= i_APCI16XX_InsnBitsWriteTTLIO,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1009) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x100a) },

drivers/staging/comedi/drivers/addi_apci_1710.c

@@ -23,6 +23,20 @@ static void fpu_end(void)
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_APCI1710.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci1710",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA_OLD,
+		.i_DeviceId		= APCI1710_BOARD_DEVICE_ID,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= 8,
+		.i_IorangeBase2		= 256,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.interrupt		= v_APCI1710_Interrupt,
+		.reset			= i_APCI1710_Reset,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA_OLD, APCI1710_BOARD_DEVICE_ID) },
 	{ 0 }

drivers/staging/comedi/drivers/addi_apci_2016.c

@@ -11,6 +11,28 @@
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci2016.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci2016",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x1002,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= APCI2016_ADDRESS_RANGE,
+		.i_IorangeBase2		= 32,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_S5920,
+		.i_NbrDoChannel		= 16,
+		.i_Timer		= 1,
+		.reset			= i_APCI2016_Reset,
+		.do_config		= i_APCI2016_ConfigDigitalOutput,
+		.do_write		= i_APCI2016_WriteDigitalOutput,
+		.do_bits		= i_APCI2016_BitsDigitalOutput,
+		.timer_config		= i_APCI2016_ConfigWatchdog,
+		.timer_write		= i_APCI2016_StartStopWriteWatchdog,
+		.timer_read		= i_APCI2016_ReadWatchdog,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1002) },
 	{ 0 }

drivers/staging/comedi/drivers/addi_apci_2032.c

@@ -11,6 +11,30 @@
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci2032.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci2032",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x1004,
+		.i_IorangeBase0		= 4,
+		.i_IorangeBase1		= APCI2032_ADDRESS_RANGE,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_93C76,
+		.i_NbrDoChannel		= 32,
+		.i_DoMaxdata		= 0xffffffff,
+		.i_Timer		= 1,
+		.interrupt		= v_APCI2032_Interrupt,
+		.reset			= i_APCI2032_Reset,
+		.do_config		= i_APCI2032_ConfigDigitalOutput,
+		.do_write		= i_APCI2032_WriteDigitalOutput,
+		.do_bits		= i_APCI2032_ReadDigitalOutput,
+		.do_read		= i_APCI2032_ReadInterruptStatus,
+		.timer_config		= i_APCI2032_ConfigWatchdog,
+		.timer_write		= i_APCI2032_StartStopWriteWatchdog,
+		.timer_read		= i_APCI2032_ReadWatchdog,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1004) },
 	{ 0 }

drivers/staging/comedi/drivers/addi_apci_2200.c

@@ -11,6 +11,30 @@
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci2200.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci2200",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x1005,
+		.i_IorangeBase0		= 4,
+		.i_IorangeBase1		= APCI2200_ADDRESS_RANGE,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_93C76,
+		.i_NbrDiChannel		= 8,
+		.i_NbrDoChannel		= 16,
+		.i_Timer		= 1,
+		.reset			= i_APCI2200_Reset,
+		.di_read		= i_APCI2200_Read1DigitalInput,
+		.di_bits		= i_APCI2200_ReadMoreDigitalInput,
+		.do_config		= i_APCI2200_ConfigDigitalOutput,
+		.do_write		= i_APCI2200_WriteDigitalOutput,
+		.do_bits		= i_APCI2200_ReadDigitalOutput,
+		.timer_config		= i_APCI2200_ConfigWatchdog,
+		.timer_write		= i_APCI2200_StartStopWriteWatchdog,
+		.timer_read		= i_APCI2200_ReadWatchdog,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x1005) },
 	{ 0 }

drivers/staging/comedi/drivers/addi_apci_3001.c

@@ -11,6 +11,46 @@
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci3120.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci3001",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA_OLD,
+		.i_DeviceId		= 0x828D,
+		.i_IorangeBase0		= AMCC_OP_REG_SIZE,
+		.i_IorangeBase1		= APCI3120_ADDRESS_RANGE,
+		.i_IorangeBase2		= 8,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_AiMaxdata		= 0xfff,
+		.pr_AiRangelist		= &range_apci3120_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 0x0f,
+		.i_Dma			= 1,
+		.i_Timer		= 1,
+		.b_AvailableConvertUnit	= 1,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.ui_MinDelaytimeNs	= 100000,
+		.interrupt		= v_APCI3120_Interrupt,
+		.reset			= i_APCI3120_Reset,
+		.ai_config		= i_APCI3120_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3120_InsnReadAnalogInput,
+		.ai_cmdtest		= i_APCI3120_CommandTestAnalogInput,
+		.ai_cmd			= i_APCI3120_CommandAnalogInput,
+		.ai_cancel		= i_APCI3120_StopCyclicAcquisition,
+		.di_read		= i_APCI3120_InsnReadDigitalInput,
+		.di_bits		= i_APCI3120_InsnBitsDigitalInput,
+		.do_config		= i_APCI3120_InsnConfigDigitalOutput,
+		.do_write		= i_APCI3120_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3120_InsnBitsDigitalOutput,
+		.timer_config		= i_APCI3120_InsnConfigTimer,
+		.timer_write		= i_APCI3120_InsnWriteTimer,
+		.timer_read		= i_APCI3120_InsnReadTimer,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA_OLD, 0x828d) },
 	{ 0 }

drivers/staging/comedi/drivers/addi_apci_3120.c

@@ -11,6 +11,50 @@
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci3120.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci3120",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA_OLD,
+		.i_DeviceId		= 0x818D,
+		.i_IorangeBase0		= AMCC_OP_REG_SIZE,
+		.i_IorangeBase1		= APCI3120_ADDRESS_RANGE,
+		.i_IorangeBase2		= 8,
+		.i_PCIEeprom		= ADDIDATA_NO_EEPROM,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_NbrAoChannel		= 8,
+		.i_AiMaxdata		= 0xffff,
+		.i_AoMaxdata		= 0x3fff,
+		.pr_AiRangelist		= &range_apci3120_ai,
+		.pr_AoRangelist		= &range_apci3120_ao,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.i_DoMaxdata		= 0x0f,
+		.i_Dma			= 1,
+		.i_Timer		= 1,
+		.b_AvailableConvertUnit	= 1,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.ui_MinDelaytimeNs	= 100000,
+		.interrupt		= v_APCI3120_Interrupt,
+		.reset			= i_APCI3120_Reset,
+		.ai_config		= i_APCI3120_InsnConfigAnalogInput,
+		.ai_read		= i_APCI3120_InsnReadAnalogInput,
+		.ai_cmdtest		= i_APCI3120_CommandTestAnalogInput,
+		.ai_cmd			= i_APCI3120_CommandAnalogInput,
+		.ai_cancel		= i_APCI3120_StopCyclicAcquisition,
+		.ao_write		= i_APCI3120_InsnWriteAnalogOutput,
+		.di_read		= i_APCI3120_InsnReadDigitalInput,
+		.di_bits		= i_APCI3120_InsnBitsDigitalInput,
+		.do_config		= i_APCI3120_InsnConfigDigitalOutput,
+		.do_write		= i_APCI3120_InsnWriteDigitalOutput,
+		.do_bits		= i_APCI3120_InsnBitsDigitalOutput,
+		.timer_config		= i_APCI3120_InsnConfigTimer,
+		.timer_write		= i_APCI3120_InsnWriteTimer,
+		.timer_read		= i_APCI3120_InsnReadTimer,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA_OLD, 0x818d) },
 	{ 0 }

drivers/staging/comedi/drivers/addi_apci_3200.c

@@ -23,6 +23,42 @@ static void fpu_end(void)
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci3200.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci3200",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3000,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 4,
+		.i_IorangeBase3		= 4,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_S5920,
+		.i_NbrAiChannel		= 16,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 16,
+		.i_AiMaxdata		= 0x3ffff,
+		.pr_AiRangelist		= &range_apci3200_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.ui_MinDelaytimeNs	= 100000,
+		.interrupt		= v_APCI3200_Interrupt,
+		.reset			= i_APCI3200_Reset,
+		.ai_config		= i_APCI3200_ConfigAnalogInput,
+		.ai_read		= i_APCI3200_ReadAnalogInput,
+		.ai_write		= i_APCI3200_InsnWriteReleaseAnalogInput,
+		.ai_bits		= i_APCI3200_InsnBits_AnalogInput_Test,
+		.ai_cmdtest		= i_APCI3200_CommandTestAnalogInput,
+		.ai_cmd			= i_APCI3200_CommandAnalogInput,
+		.ai_cancel		= i_APCI3200_StopCyclicAcquisition,
+		.di_bits		= i_APCI3200_ReadDigitalInput,
+		.do_config		= i_APCI3200_ConfigDigitalOutput,
+		.do_write		= i_APCI3200_WriteDigitalOutput,
+		.do_bits		= i_APCI3200_ReadDigitalOutput,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3000) },
 	{ 0 }

drivers/staging/comedi/drivers/addi_apci_3300.c

@@ -23,6 +23,41 @@ static void fpu_end(void)
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci3200.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci3300",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3007,
+		.i_IorangeBase0		= 128,
+		.i_IorangeBase1		= 256,
+		.i_IorangeBase2		= 4,
+		.i_IorangeBase3		= 4,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_S5920,
+		.i_NbrAiChannelDiff	= 8,
+		.i_AiChannelList	= 8,
+		.i_AiMaxdata		= 0x3ffff,
+		.pr_AiRangelist		= &range_apci3300_ai,
+		.i_NbrDiChannel		= 4,
+		.i_NbrDoChannel		= 4,
+		.ui_MinAcquisitiontimeNs = 10000,
+		.ui_MinDelaytimeNs	= 100000,
+		.interrupt		= v_APCI3200_Interrupt,
+		.reset			= i_APCI3200_Reset,
+		.ai_config		= i_APCI3200_ConfigAnalogInput,
+		.ai_read		= i_APCI3200_ReadAnalogInput,
+		.ai_write		= i_APCI3200_InsnWriteReleaseAnalogInput,
+		.ai_bits		= i_APCI3200_InsnBits_AnalogInput_Test,
+		.ai_cmdtest		= i_APCI3200_CommandTestAnalogInput,
+		.ai_cmd			= i_APCI3200_CommandAnalogInput,
+		.ai_cancel		= i_APCI3200_StopCyclicAcquisition,
+		.di_bits		= i_APCI3200_ReadDigitalInput,
+		.do_config		= i_APCI3200_ConfigDigitalOutput,
+		.do_write		= i_APCI3200_WriteDigitalOutput,
+		.do_bits		= i_APCI3200_ReadDigitalOutput,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3007) },
 	{ 0 }

drivers/staging/comedi/drivers/addi_apci_3501.c

@@ -11,6 +11,35 @@
 #include "addi-data/addi_eeprom.c"
 #include "addi-data/hwdrv_apci3501.c"
 
+static const struct addi_board boardtypes[] = {
+	{
+		.pc_DriverName		= "apci3501",
+		.i_VendorId		= PCI_VENDOR_ID_ADDIDATA,
+		.i_DeviceId		= 0x3001,
+		.i_IorangeBase0		= 64,
+		.i_IorangeBase1		= APCI3501_ADDRESS_RANGE,
+		.i_PCIEeprom		= ADDIDATA_EEPROM,
+		.pc_EepromChip		= ADDIDATA_S5933,
+		.i_AoMaxdata		= 16383,
+		.pr_AoRangelist		= &range_apci3501_ao,
+		.i_NbrDiChannel		= 2,
+		.i_NbrDoChannel		= 2,
+		.i_DoMaxdata		= 0x3,
+		.i_Timer		= 1,
+		.interrupt		= v_APCI3501_Interrupt,
+		.reset			= i_APCI3501_Reset,
+		.ao_config		= i_APCI3501_ConfigAnalogOutput,
+		.ao_write		= i_APCI3501_WriteAnalogOutput,
+		.di_bits		= i_APCI3501_ReadDigitalInput,
+		.do_config		= i_APCI3501_ConfigDigitalOutput,
+		.do_write		= i_APCI3501_WriteDigitalOutput,
+		.do_bits		= i_APCI3501_ReadDigitalOutput,
+		.timer_config		= i_APCI3501_ConfigTimerCounterWatchdog,
+		.timer_write		= i_APCI3501_StartStopWriteTimerCounterWatchdog,
+		.timer_read		= i_APCI3501_ReadTimerCounterWatchdog,
+	},
+};
+
 static DEFINE_PCI_DEVICE_TABLE(addi_apci_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ADDIDATA, 0x3001) },
 	{ 0 }