USB: remove info() macro from usb/serial drivers

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/serial/belkin_sa.c

@@ -187,7 +187,7 @@ static int belkin_sa_startup(struct usb_serial *serial)
 	/* see comments at top of file */
 	priv->bad_flow_control =
 		(le16_to_cpu(dev->descriptor.bcdDevice) <= 0x0206) ? 1 : 0;
-	info("bcdDevice: %04x, bfc: %d",
+	dev_info(&dev->dev, "bcdDevice: %04x, bfc: %d\n",
 					le16_to_cpu(dev->descriptor.bcdDevice),
 					priv->bad_flow_control);
 
@@ -577,7 +577,8 @@ static int __init belkin_sa_init(void)
 	retval = usb_register(&belkin_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&belkin_device);

drivers/usb/serial/cp2101.c

@@ -753,7 +753,8 @@ static int __init cp2101_init(void)
 	}
 
 	/* Success */
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 }
 

drivers/usb/serial/cyberjack.c

@@ -499,8 +499,9 @@ static int __init cyberjack_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_VERSION " " DRIVER_AUTHOR);
-	info(DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION " "
+	       DRIVER_AUTHOR "\n");
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
 
 	return 0;
 failed_usb_register:

drivers/usb/serial/cypress_m8.c

@@ -1658,7 +1658,8 @@ static int __init cypress_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 
 failed_usb_register:

drivers/usb/serial/digi_acceleport.c

@@ -1854,7 +1854,8 @@ static int __init digi_init(void)
 	retval = usb_register(&digi_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&digi_acceleport_4_device);

drivers/usb/serial/empeg.c

@@ -519,7 +519,8 @@ static int __init empeg_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	return 0;
 failed_usb_register:

drivers/usb/serial/ftdi_sio.c

@@ -1154,7 +1154,7 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 		/* Assume its an FT232R  */
 		priv->chip_type = FT232RL;
 	}
-	info("Detected %s", ftdi_chip_name[priv->chip_type]);
+	dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
 }
 
 
@@ -1410,7 +1410,8 @@ static int ftdi_jtag_probe(struct usb_serial *serial)
 	dbg("%s", __func__);
 
 	if (interface == udev->actconfig->interface[0]) {
-		info("Ignoring serial port reserved for JTAG");
+		dev_info(&udev->dev,
+			 "Ignoring serial port reserved for JTAG\n");
 		return -ENODEV;
 	}
 
@@ -1428,7 +1429,8 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
 
 	if (ep->enabled && ep_desc->wMaxPacketSize == 0) {
 		ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
-		info("Fixing invalid wMaxPacketSize on read pipe");
+		dev_info(&serial->dev->dev,
+			 "Fixing invalid wMaxPacketSize on read pipe\n");
 	}
 
 	return 0;
@@ -2426,7 +2428,8 @@ static int __init ftdi_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&ftdi_sio_device);

drivers/usb/serial/garmin_gps.c

@@ -1585,7 +1585,8 @@ static int __init garmin_init(void)
 	retval = usb_register(&garmin_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	return 0;
 failed_usb_register:

drivers/usb/serial/hp4x.c

@@ -63,7 +63,8 @@ static int __init hp49gp_init(void)
 	retval = usb_register(&hp49gp_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&hp49gp_device);

drivers/usb/serial/io_edgeport.c

@@ -3253,7 +3253,8 @@ static int __init edgeport_init(void)
 	if (retval)
 		goto failed_usb_register;
 	atomic_set(&CmdUrbs, 0);
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 
 failed_usb_register:

drivers/usb/serial/io_ti.c

@@ -2978,7 +2978,8 @@ static int __init edgeport_init(void)
 	retval = usb_register(&io_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&edgeport_2port_device);

drivers/usb/serial/ipaq.c

@@ -976,7 +976,6 @@ static int __init ipaq_init(void)
 	retval = usb_serial_register(&ipaq_device);
 	if (retval)
 		goto failed_usb_serial_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
 	if (vendor) {
 		ipaq_id_table[0].idVendor = vendor;
 		ipaq_id_table[0].idProduct = product;
@@ -985,6 +984,8 @@ static int __init ipaq_init(void)
 	if (retval)
 		goto failed_usb_register;
 
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&ipaq_device);

drivers/usb/serial/ipw.c

@@ -485,7 +485,8 @@ static int usb_ipw_init(void)
 		usb_serial_deregister(&ipw_device);
 		return retval;
 	}
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 }
 

drivers/usb/serial/ir-usb.c

@@ -602,7 +602,8 @@ static int __init ir_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	return 0;
 

drivers/usb/serial/iuu_phoenix.c

@@ -1185,7 +1185,8 @@ static int __init iuu_init(void)
 	retval = usb_register(&iuu_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&iuu_device);

drivers/usb/serial/keyspan.c

@@ -217,7 +217,8 @@ static int __init keyspan_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	return 0;
 failed_usb_register:

drivers/usb/serial/keyspan_pda.c

@@ -874,7 +874,8 @@ static int __init keyspan_pda_init(void)
 	retval = usb_register(&keyspan_pda_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 #ifdef XIRCOM

drivers/usb/serial/kl5kusb105.c

@@ -183,10 +183,9 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port,
 			KLSI_TIMEOUT);
 	if (rc < 0)
 		err("Change port settings failed (error = %d)", rc);
-	info("%s - %d byte block, baudrate %x, databits %d, u1 %d, u2 %d",
-	    __func__,
-	    settings->pktlen,
-	    settings->baudrate, settings->databits,
+	dev_info(&port->serial->dev->dev,
+		 "%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n",
+		 settings->pktlen, settings->baudrate, settings->databits,
 		 settings->unknown1, settings->unknown2);
 	return rc;
 } /* klsi_105_chg_port_settings */
@@ -215,7 +214,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 	__u8 status_buf[KLSI_STATUSBUF_LEN] = { -1, -1};
 	__u16 status;
 
-	info("%s - sending SIO Poll request", __func__);
+	dev_info(&port->serial->dev->dev, "sending SIO Poll request\n");
 	rc = usb_control_msg(port->serial->dev,
 			     usb_rcvctrlpipe(port->serial->dev, 0),
 			     KL5KUSB105A_SIO_POLL,
@@ -230,7 +229,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 	else {
 		status = get_unaligned_le16(status_buf);
 
-		info("%s - read status %x %x", __func__,
+		dev_info(&port->serial->dev->dev, "read status %x %x",
 			 status_buf[0], status_buf[1]);
 
 		*line_state_p = klsi_105_status2linestate(status);
@@ -475,7 +474,8 @@ static void klsi_105_close(struct tty_struct *tty,
 	/* FIXME */
 	/* wgg - do I need this? I think so. */
 	usb_kill_urb(port->interrupt_in_urb);
-	info("kl5kusb105 port stats: %ld bytes in, %ld bytes out",
+	dev_info(&port->serial->dev->dev,
+		 "port stats: %ld bytes in, %ld bytes out\n",
 		 priv->bytes_in, priv->bytes_out);
 } /* klsi_105_close */
 
@@ -960,7 +960,8 @@ static int __init klsi_105_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&kl5kusb105d_device);

drivers/usb/serial/kobil_sct.c

@@ -744,8 +744,8 @@ static int __init kobil_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_VERSION " " DRIVER_AUTHOR);
-	info(DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	return 0;
 failed_usb_register:

drivers/usb/serial/mct_u232.c

@@ -817,7 +817,8 @@ static int __init mct_u232_init(void)
 	retval = usb_register(&mct_u232_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&mct_u232_device);

drivers/usb/serial/mos7720.c

@@ -1585,7 +1585,8 @@ static int __init moschip7720_init(void)
 	if (retval)
 		goto failed_port_device_register;
 
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	/* Register with the usb */
 	retval = usb_register(&usb_driver);

drivers/usb/serial/mos7840.c

@@ -2743,7 +2743,8 @@ static int __init moschip7840_init(void)
 		goto failed_port_device_register;
 
 	dbg("%s\n", "Entring...");
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	/* Register with the usb */
 	retval = usb_register(&io_driver);

drivers/usb/serial/omninet.c

@@ -364,7 +364,8 @@ static int __init omninet_init(void)
 	retval = usb_register(&omninet_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&zyxel_omninet_device);

drivers/usb/serial/option.c

@@ -420,7 +420,8 @@ static int __init option_init(void)
 	if (retval)
 		goto failed_driver_register;
 
-	info(DRIVER_DESC ": " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	return 0;
 

drivers/usb/serial/pl2303.c

@@ -1147,7 +1147,7 @@ static int __init pl2303_init(void)
 	retval = usb_register(&pl2303_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&pl2303_device);

drivers/usb/serial/safe_serial.c

@@ -250,8 +250,8 @@ static void safe_read_bulk_callback(struct urb *urb)
 		if (!fcs) {
 			int actual_length = data[length - 2] >> 2;
 			if (actual_length <= (length - 2)) {
-				info("%s - actual: %d", __func__,
-							actual_length);
+				dev_info(&urb->dev->dev, "%s - actual: %d\n",
+					 __func__, actual_length);
 				tty_insert_flip_string(tty,
 							data, actual_length);
 				tty_flip_buffer_push(tty);
@@ -428,14 +428,13 @@ static int __init safe_init(void)
 {
 	int i, retval;
 
-	info(DRIVER_VERSION " " DRIVER_AUTHOR);
-	info(DRIVER_DESC);
-	info("vendor: %x product: %x safe: %d padded: %d\n",
-					vendor, product, safe, padded);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	/* if we have vendor / product parameters patch them into id list */
 	if (vendor || product) {
-		info("vendor: %x product: %x\n", vendor, product);
+		printk(KERN_INFO KBUILD_MODNAME ": vendor: %x product: %x\n",
+		       vendor, product);
 
 		for (i = 0; i < ARRAY_SIZE(id_table); i++) {
 			if (!id_table[i].idVendor && !id_table[i].idProduct) {

drivers/usb/serial/sierra.c

@@ -750,7 +750,8 @@ static int __init sierra_init(void)
 	if (retval)
 		goto failed_driver_register;
 
-	info(DRIVER_DESC ": " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	return 0;
 

drivers/usb/serial/spcp8x5.c

@@ -1054,7 +1054,8 @@ static int __init spcp8x5_init(void)
 	retval = usb_register(&spcp8x5_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&spcp8x5_device);

drivers/usb/serial/ti_usb_3410_5052.c

@@ -382,7 +382,8 @@ static int __init ti_init(void)
 	if (ret)
 		goto failed_usb;
 
-	info(TI_DRIVER_DESC " " TI_DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " TI_DRIVER_VERSION ":"
+	       TI_DRIVER_DESC "\n");
 
 	return 0;
 

drivers/usb/serial/usb-serial.c

@@ -1160,7 +1160,7 @@ static int __init usb_serial_init(void)
 		goto exit_generic;
 	}
 
-	info(DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
 
 	return result;
 
@@ -1237,7 +1237,7 @@ int usb_serial_register(struct usb_serial_driver *driver)
 						retval, driver->description);
 		list_del(&driver->driver_list);
 	} else
-		info("USB Serial support registered for %s",
+		printk(KERN_INFO "USB Serial support registered for %s\n",
 						driver->description);
 
 	return retval;
@@ -1248,7 +1248,8 @@ EXPORT_SYMBOL_GPL(usb_serial_register);
 void usb_serial_deregister(struct usb_serial_driver *device)
 {
 	/* must be called with BKL held */
-	info("USB Serial deregistering driver %s", device->description);
+	printk(KERN_INFO "USB Serial deregistering driver %s\n",
+	       device->description);
 	list_del(&device->driver_list);
 	usb_serial_bus_deregister(device);
 }

drivers/usb/serial/visor.c

@@ -971,11 +971,14 @@ static int __init visor_init(void)
 				break;
 			}
 		}
-		info(
-		  "Untested USB device specified at time of module insertion");
-		info("Warning: This is not guaranteed to work");
-		info("Using a newer kernel is preferred to this method");
-		info("Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x",
+		printk(KERN_INFO KBUILD_MODNAME
+		       ": Untested USB device specified at time of module insertion\n");
+		printk(KERN_INFO KBUILD_MODNAME
+		       ": Warning: This is not guaranteed to work\n");
+		printk(KERN_INFO KBUILD_MODNAME
+		       ": Using a newer kernel is preferred to this method\n");
+		printk(KERN_INFO KBUILD_MODNAME
+		       ": Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x\n",
 			vendor, product);
 	}
 	retval = usb_serial_register(&handspring_device);
@@ -990,7 +993,7 @@ static int __init visor_init(void)
 	retval = usb_register(&visor_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
 
 	return 0;
 failed_usb_register:

drivers/usb/serial/whiteheat.c

@@ -452,8 +452,9 @@ static int whiteheat_attach(struct usb_serial *serial)
 
 	hw_info = (struct whiteheat_hw_info *)&result[1];
 
-	info("%s: Driver %s: Firmware v%d.%02d", serial->type->description,
-	     DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev);
+	dev_info(&serial->dev->dev, "%s: Driver %s: Firmware v%d.%02d\n",
+		 serial->type->description, DRIVER_VERSION,
+		 hw_info->sw_major_rev, hw_info->sw_minor_rev);
 
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
@@ -1556,7 +1557,8 @@ static int __init whiteheat_init(void)
 	retval = usb_register(&whiteheat_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&whiteheat_device);