Merge tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

 - Improve support for TI bq20z75 in sbs-battery

 - Add Qualcomm PM8xxx reboot driver

 - Add cros-ec USBPD charger driver

 - Move ds2760 battery driver from w1 to power-supply and add DT support

 - Misc fixes

* tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  power: supply: bq27xxx: Update comments
  power: supply: max77693_charger: fix unintentional fall-through
  power: supply: mark expected switch fall-throughs
  power: supply: lego_ev3_battery: fix Vce offset
  power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() return value
  power: supply: ds2760_battery: add devicetree probing
  power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion
  w1: core: match sub-nodes of bus masters in devicetree
  dt-bindings: w1: document bindings for ds2760 battery monitor
  dt-bindings: w1: document generic onewire bindings
  power: supply: adp5061: Fix a couple off by ones
  dt-bindings: power: reset: qcom: Add resin binding
  adp5061: New driver for ADP5061 I2C battery charger
  power: generic-adc-battery: check for duplicate properties copied from iio channels
  power: generic-adc-battery: fix out-of-bounds write when copying channel properties
  power: supply: axp288_charger: Fix initial constant_charge_current value
  power: supply: ab8500: stop using getnstimeofday64()
  power: gemini-poweroff: Avoid more spurious poweroffs
  power: vexpress: fix corruption in notifier registration
  power: remove possible deadlock when unregistering power_supply
  ...

Documentation/devicetree/bindings/power/reset/qcom,pon.txt

+Qualcomm PON Device
+
+The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+and resin along with the Android reboot-mode.
+
+This DT node has pwrkey and resin as sub nodes.
+
+Required Properties:
+-compatible: "qcom,pm8916-pon"
+-reg: Specifies the physical address of the pon register
+
+Optional subnode:
+-pwrkey: Specifies the subnode pwrkey and should follow the
+ qcom,pm8941-pwrkey.txt description.
+-resin: Specifies the subnode resin and should follow the
+ qcom,pm8xxx-pwrkey.txt description.
+
+The rest of the properties should follow the generic reboot-mode description
+found in reboot-mode.txt
+
+Example:
+
+	pon@800 {
+		compatible = "qcom,pm8916-pon";
+
+		reg = <0x800>;
+		mode-bootloader = <0x2>;
+		mode-recovery = <0x1>;
+
+		pwrkey {
+			compatible = "qcom,pm8941-pwrkey";
+			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+			linux,code = <KEY_POWER>;
+		};
+
+		resin {
+			compatible = "qcom,pm8941-resin";
+			interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};

Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt

+Devicetree bindings for Maxim DS2760
+====================================
+
+The ds2760 is a w1 slave device and must hence have its sub-node in DT
+under a w1 bus master node.
+
+The device exposes a power supply, so the details described in
+Documentation/devicetree/bindings/power/supply/power_supply.txt apply.
+
+Required properties:
+- compatible: must be "maxim,ds2760"
+
+Optional properties:
+- power-supplies:	Refers to one or more power supplies connected to
+			this battery.
+- maxim,pmod-enabled:	This boolean property enables the DS2760 to enter
+			sleep mode when the DQ line goes low for greater
+			than 2 seconds and leave sleep Mode when the DQ
+			line goes high.
+- maxim,cache-time-ms:	Time im milliseconds to cache the data for. When
+			this time expires, the values are read again from
+			the hardware. Defaults to 1000.
+- rated-capacity-microamp-hours:
+			The rated capacity of the battery, in mAh.
+			If not specified, the value stored in the
+			non-volatile chip memory is used.

Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt

@@ -2,7 +2,11 @@ SBS sbs-battery
 ~~~~~~~~~~
 
 Required properties :
- - compatible : "sbs,sbs-battery"
+ - compatible: "<vendor>,<part-number>", "sbs,sbs-battery" as fallback. The
+     part number compatible string might be used in order to take care of
+     vendor specific registers.
+     Known <vendor>,<part-number>:
+       ti,bq20z75
 
 Optional properties :
  - sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c
@@ -14,9 +18,9 @@ Optional properties :
 
 Example:
 
-	bq20z75@b {
-		compatible = "sbs,sbs-battery";
-		reg = < 0xb >;
+	battery@b {
+		compatible = "ti,bq20z75", "sbs,sbs-battery";
+		reg = <0xb>;
 		sbs,i2c-retry-count = <2>;
 		sbs,poll-retry-count = <10>;
 		sbs,battery-detect-gpios = <&gpio-controller 122 1>;

Documentation/devicetree/bindings/w1/w1-gpio.txt

@@ -13,10 +13,15 @@ Optional properties:
  - linux,open-drain: if specified, the data pin is considered in
 		     open-drain mode.
 
+Also refer to the generic w1.txt document.
+
 Examples:
 
 	onewire {
 		compatible = "w1-gpio";
-		gpios = <&gpio 126 0>, <&gpio 105 0>;
-	};
+		gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
 
+		battery {
+			// ...
+		};
+	};

Documentation/devicetree/bindings/w1/w1.txt

+Generic devicetree bindings for onewire (w1) busses
+===================================================
+
+Onewire busses are described through nodes of their master bus controller.
+Slave devices are listed as sub-nodes of such master devices. For now, only
+one slave is allowed per bus master.
+
+
+Example:
+
+	charger: charger {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio 100 0>, <&gpio 101 0>;
+
+		battery {
+			compatible = "maxim,ds2760";
+			power-supplies = <&charger>;
+		};
+	};

MAINTAINERS

@@ -842,6 +842,13 @@ S:	Supported
 F:	drivers/mux/adgs1408.c
 F:	Documentation/devicetree/bindings/mux/adgs1408.txt
 
+ANALOG DEVICES INC ADP5061 DRIVER
+M:	Stefan Popa <stefan.popa@analog.com>
+L:	linux-pm@vger.kernel.org
+W:	http://ez.analog.com/community/linux-device-drivers
+S:	Supported
+F:	drivers/power/supply/adp5061.c
+
 ANALOG DEVICES INC ADV7180 DRIVER
 M:	Lars-Peter Clausen <lars@metafoo.de>
 L:	linux-media@vger.kernel.org

drivers/power/reset/Kconfig

@@ -104,6 +104,17 @@ config POWER_RESET_MSM
 	help
 	  Power off and restart support for Qualcomm boards.
 
+config POWER_RESET_QCOM_PON
+	tristate "Qualcomm power-on driver"
+	depends on ARCH_QCOM
+	depends on MFD_SPMI_PMIC
+	select REBOOT_MODE
+	help
+	  Power On support for Qualcomm boards.
+	  If you have a Qualcomm platform and need support for
+	  power-on and reboot reason, Say Y.
+	  If unsure, Say N.
+
 config POWER_RESET_OCELOT_RESET
 	bool "Microsemi Ocelot reset driver"
 	depends on MSCC_OCELOT || COMPILE_TEST

drivers/power/reset/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
 obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
 obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
+obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
 obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
 obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
 obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o

drivers/power/reset/gemini-poweroff.c

@@ -130,7 +130,17 @@ static int gemini_poweroff_probe(struct platform_device *pdev)
 	val |= GEMINI_CTRL_ENABLE;
 	writel(val, gpw->base + GEMINI_PWC_CTRLREG);
 
-	/* Now that the state machine is active, clear the IRQ */
+	/* Clear the IRQ */
+	val = readl(gpw->base + GEMINI_PWC_CTRLREG);
+	val |= GEMINI_CTRL_IRQ_CLR;
+	writel(val, gpw->base + GEMINI_PWC_CTRLREG);
+
+	/* Wait for this to clear */
+	val = readl(gpw->base + GEMINI_PWC_STATREG);
+	while (val & 0x70U)
+		val = readl(gpw->base + GEMINI_PWC_STATREG);
+
+	/* Clear the IRQ again */
 	val = readl(gpw->base + GEMINI_PWC_CTRLREG);
 	val |= GEMINI_CTRL_IRQ_CLR;
 	writel(val, gpw->base + GEMINI_PWC_CTRLREG);

drivers/power/reset/qcom-pon.c

+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017-18 Linaro Limited
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/reboot-mode.h>
+#include <linux/regmap.h>
+
+#define PON_SOFT_RB_SPARE		0x8f
+
+struct pm8916_pon {
+	struct device *dev;
+	struct regmap *regmap;
+	u32 baseaddr;
+	struct reboot_mode_driver reboot_mode;
+};
+
+static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
+				    unsigned int magic)
+{
+	struct pm8916_pon *pon = container_of
+			(reboot, struct pm8916_pon, reboot_mode);
+	int ret;
+
+	ret = regmap_update_bits(pon->regmap,
+				 pon->baseaddr + PON_SOFT_RB_SPARE,
+				 0xfc, magic << 2);
+	if (ret < 0)
+		dev_err(pon->dev, "update reboot mode bits failed\n");
+
+	return ret;
+}
+
+static int pm8916_pon_probe(struct platform_device *pdev)
+{
+	struct pm8916_pon *pon;
+	int error;
+
+	pon = devm_kzalloc(&pdev->dev, sizeof(*pon), GFP_KERNEL);
+	if (!pon)
+		return -ENOMEM;
+
+	pon->dev = &pdev->dev;
+
+	pon->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!pon->regmap) {
+		dev_err(&pdev->dev, "failed to locate regmap\n");
+		return -ENODEV;
+	}
+
+	error = of_property_read_u32(pdev->dev.of_node, "reg",
+				     &pon->baseaddr);
+	if (error)
+		return error;
+
+	pon->reboot_mode.dev = &pdev->dev;
+	pon->reboot_mode.write = pm8916_reboot_mode_write;
+	error = devm_reboot_mode_register(&pdev->dev, &pon->reboot_mode);
+	if (error) {
+		dev_err(&pdev->dev, "can't register reboot mode\n");
+		return error;
+	}
+
+	platform_set_drvdata(pdev, pon);
+
+	return devm_of_platform_populate(&pdev->dev);
+}
+
+static const struct of_device_id pm8916_pon_id_table[] = {
+	{ .compatible = "qcom,pm8916-pon" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pm8916_pon_id_table);
+
+static struct platform_driver pm8916_pon_driver = {
+	.probe = pm8916_pon_probe,
+	.driver = {
+		.name = "pm8916-pon",
+		.of_match_table = of_match_ptr(pm8916_pon_id_table),
+	},
+};
+module_platform_driver(pm8916_pon_driver);
+
+MODULE_DESCRIPTION("pm8916 Power On driver");
+MODULE_LICENSE("GPL v2");

drivers/power/reset/vexpress-poweroff.c

@@ -35,6 +35,7 @@ static void vexpress_reset_do(struct device *dev, const char *what)
 }
 
 static struct device *vexpress_power_off_device;
+static atomic_t vexpress_restart_nb_refcnt = ATOMIC_INIT(0);
 
 static void vexpress_power_off(void)
 {
@@ -99,10 +100,13 @@ static int _vexpress_register_restart_handler(struct device *dev)
 	int err;
 
 	vexpress_restart_device = dev;
-	err = register_restart_handler(&vexpress_restart_nb);
-	if (err) {
-		dev_err(dev, "cannot register restart handler (err=%d)\n", err);
-		return err;
+	if (atomic_inc_return(&vexpress_restart_nb_refcnt) == 1) {
+		err = register_restart_handler(&vexpress_restart_nb);
+		if (err) {
+			dev_err(dev, "cannot register restart handler (err=%d)\n", err);
+			atomic_dec(&vexpress_restart_nb_refcnt);
+			return err;
+		}
 	}
 	device_create_file(dev, &dev_attr_active);
 

drivers/power/reset/zx-reboot.c

@@ -51,6 +51,7 @@ static int zx_reboot_probe(struct platform_device *pdev)
 
 	np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu");
 	pcu_base = of_iomap(np, 0);
+	of_node_put(np);
 	if (!pcu_base) {
 		iounmap(base);
 		WARN(1, "failed to map pcu_base address");

drivers/power/supply/Kconfig

@@ -75,6 +75,17 @@ config BATTERY_88PM860X
 	help
 	  Say Y here to enable battery monitor for Marvell 88PM860x chip.
 
+config CHARGER_ADP5061
+	tristate "ADP5061 battery charger driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y here to enable support for the ADP5061 standalone battery
+	  charger.
+
+	  This driver can be built as a module. If so, the module will be
+	  called adp5061.
+
 config BATTERY_ACT8945A
 	tristate "Active-semi ACT8945A charger driver"
 	depends on MFD_ACT8945A || COMPILE_TEST
@@ -92,7 +103,7 @@ config BATTERY_CPCAP
 
 config BATTERY_DS2760
 	tristate "DS2760 battery driver (HP iPAQ & others)"
-	depends on W1 && W1_SLAVE_DS2760
+	depends on W1
 	help
 	  Say Y here to enable support for batteries with ds2760 chip.
 
@@ -624,4 +635,14 @@ config CHARGER_RT9455
 	help
 	  Say Y to enable support for Richtek RT9455 battery charger.
 
+config CHARGER_CROS_USBPD
+	tristate "ChromeOS EC based USBPD charger"
+	depends on MFD_CROS_EC
+	default n
+	help
+	  Say Y here to enable ChromeOS EC based USBPD charger
+	  driver. This driver gets various bits of information about
+	  what is connected to USB PD ports from the EC and converts
+	  that into power_supply properties.
+
 endif # POWER_SUPPLY

drivers/power/supply/Makefile

@@ -18,6 +18,7 @@ obj-$(CONFIG_WM8350_POWER)	+= wm8350_power.o
 obj-$(CONFIG_TEST_POWER)	+= test_power.o
 
 obj-$(CONFIG_BATTERY_88PM860X)	+= 88pm860x_battery.o
+obj-$(CONFIG_CHARGER_ADP5061)	+= adp5061.o
 obj-$(CONFIG_BATTERY_ACT8945A)	+= act8945a_charger.o
 obj-$(CONFIG_BATTERY_AXP20X)	+= axp20x_battery.o
 obj-$(CONFIG_CHARGER_AXP20X)	+= axp20x_ac_power.o
@@ -83,3 +84,4 @@ obj-$(CONFIG_CHARGER_TPS65090)	+= tps65090-charger.o
 obj-$(CONFIG_CHARGER_TPS65217)	+= tps65217_charger.o
 obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
 obj-$(CONFIG_AXP288_CHARGER)	+= axp288_charger.o
+obj-$(CONFIG_CHARGER_CROS_USBPD)	+= cros_usbpd-charger.o

drivers/power/supply/ab8500_fg.c

@@ -379,15 +379,13 @@ static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr)
  */
 static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
 {
-	struct timespec64 ts64;
+	time64_t now = ktime_get_boottime_seconds();
 	struct ab8500_fg_avg_cap *avg = &di->avg_cap;
 
-	getnstimeofday64(&ts64);
-
 	do {
 		avg->sum += sample - avg->samples[avg->pos];
 		avg->samples[avg->pos] = sample;
-		avg->time_stamps[avg->pos] = ts64.tv_sec;
+		avg->time_stamps[avg->pos] = now;
 		avg->pos++;
 
 		if (avg->pos == NBR_AVG_SAMPLES)
@@ -400,7 +398,7 @@ static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
 		 * Check the time stamp for each sample. If too old,
 		 * replace with latest sample
 		 */
-	} while (ts64.tv_sec - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
+	} while (now - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
 
 	avg->avg = avg->sum / avg->nbr_samples;
 
@@ -439,14 +437,14 @@ static void ab8500_fg_clear_cap_samples(struct ab8500_fg *di)
 static void ab8500_fg_fill_cap_sample(struct ab8500_fg *di, int sample)
 {
 	int i;
-	struct timespec64 ts64;
+	time64_t now;
 	struct ab8500_fg_avg_cap *avg = &di->avg_cap;
 
-	getnstimeofday64(&ts64);
+	now = ktime_get_boottime_seconds();
 
 	for (i = 0; i < NBR_AVG_SAMPLES; i++) {
 		avg->samples[i] = sample;
-		avg->time_stamps[i] = ts64.tv_sec;
+		avg->time_stamps[i] = now;
 	}
 
 	avg->pos = 0;

drivers/power/supply/adp5061.c

+/*
+ * ADP5061 I2C Programmable Linear Battery Charger
+ *
+ * Copyright 2018 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/mod_devicetable.h>
+#include <linux/power_supply.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+/* ADP5061 registers definition */
+#define ADP5061_ID			0x00
+#define ADP5061_REV			0x01
+#define ADP5061_VINX_SET		0x02
+#define ADP5061_TERM_SET		0x03
+#define ADP5061_CHG_CURR		0x04
+#define ADP5061_VOLTAGE_TH		0x05
+#define ADP5061_TIMER_SET		0x06
+#define ADP5061_FUNC_SET_1		0x07
+#define ADP5061_FUNC_SET_2		0x08
+#define ADP5061_INT_EN			0x09
+#define ADP5061_INT_ACT			0x0A
+#define ADP5061_CHG_STATUS_1		0x0B
+#define ADP5061_CHG_STATUS_2		0x0C
+#define ADP5061_FAULT			0x0D
+#define ADP5061_BATTERY_SHORT		0x10
+#define ADP5061_IEND			0x11
+
+/* ADP5061_VINX_SET */
+#define ADP5061_VINX_SET_ILIM_MSK		GENMASK(3, 0)
+#define ADP5061_VINX_SET_ILIM_MODE(x)		(((x) & 0x0F) << 0)
+
+/* ADP5061_TERM_SET */
+#define ADP5061_TERM_SET_VTRM_MSK		GENMASK(7, 2)
+#define ADP5061_TERM_SET_VTRM_MODE(x)		(((x) & 0x3F) << 2)
+#define ADP5061_TERM_SET_CHG_VLIM_MSK		GENMASK(1, 0)
+#define ADP5061_TERM_SET_CHG_VLIM_MODE(x)	(((x) & 0x03) << 0)
+
+/* ADP5061_CHG_CURR */
+#define ADP5061_CHG_CURR_ICHG_MSK		GENMASK(6, 2)
+#define ADP5061_CHG_CURR_ICHG_MODE(x)		(((x) & 0x1F) << 2)
+#define ADP5061_CHG_CURR_ITRK_DEAD_MSK		GENMASK(1, 0)
+#define ADP5061_CHG_CURR_ITRK_DEAD_MODE(x)	(((x) & 0x03) << 0)
+
+/* ADP5061_VOLTAGE_TH */
+#define ADP5061_VOLTAGE_TH_DIS_RCH_MSK		BIT(7)
+#define ADP5061_VOLTAGE_TH_DIS_RCH_MODE(x)	(((x) & 0x01) << 7)
+#define ADP5061_VOLTAGE_TH_VRCH_MSK		GENMASK(6, 5)
+#define ADP5061_VOLTAGE_TH_VRCH_MODE(x)		(((x) & 0x03) << 5)
+#define ADP5061_VOLTAGE_TH_VTRK_DEAD_MSK	GENMASK(4, 3)
+#define ADP5061_VOLTAGE_TH_VTRK_DEAD_MODE(x)	(((x) & 0x03) << 3)
+#define ADP5061_VOLTAGE_TH_VWEAK_MSK		GENMASK(2, 0)
+#define ADP5061_VOLTAGE_TH_VWEAK_MODE(x)	(((x) & 0x07) << 0)
+
+/* ADP5061_CHG_STATUS_1 */
+#define ADP5061_CHG_STATUS_1_VIN_OV(x)		(((x) >> 7) & 0x1)
+#define ADP5061_CHG_STATUS_1_VIN_OK(x)		(((x) >> 6) & 0x1)
+#define ADP5061_CHG_STATUS_1_VIN_ILIM(x)	(((x) >> 5) & 0x1)
+#define ADP5061_CHG_STATUS_1_THERM_LIM(x)	(((x) >> 4) & 0x1)
+#define ADP5061_CHG_STATUS_1_CHDONE(x)		(((x) >> 3) & 0x1)
+#define ADP5061_CHG_STATUS_1_CHG_STATUS(x)	(((x) >> 0) & 0x7)
+
+/* ADP5061_CHG_STATUS_2 */
+#define ADP5061_CHG_STATUS_2_THR_STATUS(x)	(((x) >> 5) & 0x7)
+#define ADP5061_CHG_STATUS_2_RCH_LIM_INFO(x)	(((x) >> 3) & 0x1)
+#define ADP5061_CHG_STATUS_2_BAT_STATUS(x)	(((x) >> 0) & 0x7)
+
+/* ADP5061_IEND */
+#define ADP5061_IEND_IEND_MSK			GENMASK(7, 5)
+#define ADP5061_IEND_IEND_MODE(x)		(((x) & 0x07) << 5)
+
+#define ADP5061_NO_BATTERY	0x01
+#define ADP5061_ICHG_MAX	1300 // mA
+
+enum adp5061_chg_status {
+	ADP5061_CHG_OFF,
+	ADP5061_CHG_TRICKLE,
+	ADP5061_CHG_FAST_CC,
+	ADP5061_CHG_FAST_CV,
+	ADP5061_CHG_COMPLETE,
+	ADP5061_CHG_LDO_MODE,
+	ADP5061_CHG_TIMER_EXP,
+	ADP5061_CHG_BAT_DET,
+};
+
+static const int adp5061_chg_type[4] = {
+	[ADP5061_CHG_OFF] = POWER_SUPPLY_CHARGE_TYPE_NONE,
+	[ADP5061_CHG_TRICKLE] = POWER_SUPPLY_CHARGE_TYPE_TRICKLE,
+	[ADP5061_CHG_FAST_CC] = POWER_SUPPLY_CHARGE_TYPE_FAST,
+	[ADP5061_CHG_FAST_CV] = POWER_SUPPLY_CHARGE_TYPE_FAST,
+};
+
+static const int adp5061_vweak_th[8] = {
+	2700, 2800, 2900, 3000, 3100, 3200, 3300, 3400,
+};
+
+static const int adp5061_prechg_current[4] = {
+	5, 10, 20, 80,
+};
+
+static const int adp5061_vmin[4] = {
+	2000, 2500, 2600, 2900,
+};
+
+static const int adp5061_const_chg_vmax[4] = {
+	3200, 3400, 3700, 3800,
+};
+
+static const int adp5061_const_ichg[24] = {
+	50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650,
+	700, 750, 800, 850, 900, 950, 1000, 1050, 1100, 1200, 1300,
+};
+
+static const int adp5061_vmax[36] = {
+	3800, 3820, 3840, 3860, 3880, 3900, 3920, 3940, 3960, 3980,
+	4000, 4020, 4040, 4060, 4080, 4100, 4120, 4140, 4160, 4180,
+	4200, 4220, 4240, 4260, 4280, 4300, 4320, 4340, 4360, 4380,
+	4400, 4420, 4440, 4460, 4480, 4500,
+};
+
+static const int adp5061_in_current_lim[16] = {
+	100, 150, 200, 250, 300, 400, 500, 600, 700,
+	800, 900, 1000, 1200, 1500, 1800, 2100,
+};
+
+static const int adp5061_iend[8] = {
+	12500, 32500, 52500, 72500, 92500, 117500, 142500, 170000,
+};
+
+struct adp5061_state {
+	struct i2c_client		*client;
+	struct regmap			*regmap;
+	struct power_supply		*psy;
+};
+
+static int adp5061_get_array_index(const int *array, u8 size, int val)
+{
+	int i;
+
+	for (i = 1; i < size; i++) {
+		if (val < array[i])
+			break;
+	}
+
+	return i-1;
+}
+
+static int adp5061_get_status(struct adp5061_state *st,
+			      u8 *status1, u8 *status2)
+{
+	u8 buf[2];
+	int ret;
+
+	/* CHG_STATUS1 and CHG_STATUS2 are adjacent regs */
+	ret = regmap_bulk_read(st->regmap, ADP5061_CHG_STATUS_1,
+			       &buf[0], 2);
+	if (ret < 0)
+		return ret;
+
+	*status1 = buf[0];
+	*status2 = buf[1];
+
+	return ret;
+}
+
+static int adp5061_get_input_current_limit(struct adp5061_state *st,
+		union power_supply_propval *val)
+{
+	unsigned int regval;
+	int mode, ret;
+
+	ret = regmap_read(st->regmap, ADP5061_VINX_SET, &regval);
+	if (ret < 0)
+		return ret;
+
+	mode = ADP5061_VINX_SET_ILIM_MODE(regval);
+	val->intval = adp5061_in_current_lim[mode] * 1000;
+
+	return ret;
+}
+
+static int adp5061_set_input_current_limit(struct adp5061_state *st, int val)
+{
+	int index;
+
+	/* Convert from uA to mA */
+	val /= 1000;
+	index = adp5061_get_array_index(adp5061_in_current_lim,
+					ARRAY_SIZE(adp5061_in_current_lim),
+					val);
+	if (index < 0)
+		return index;
+
+	return regmap_update_bits(st->regmap, ADP5061_VINX_SET,
+				  ADP5061_VINX_SET_ILIM_MSK,
+				  ADP5061_VINX_SET_ILIM_MODE(index));
+}
+
+static int adp5061_set_min_voltage(struct adp5061_state *st, int val)
+{
+	int index;
+
+	/* Convert from uV to mV */
+	val /= 1000;
+	index = adp5061_get_array_index(adp5061_vmin,
+					ARRAY_SIZE(adp5061_vmin),
+					val);
+	if (index < 0)
+		return index;
+
+	return regmap_update_bits(st->regmap, ADP5061_VOLTAGE_TH,
+				  ADP5061_VOLTAGE_TH_VTRK_DEAD_MSK,
+				  ADP5061_VOLTAGE_TH_VTRK_DEAD_MODE(index));
+}
+
+static int adp5061_get_min_voltage(struct adp5061_state *st,
+				   union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADP5061_VOLTAGE_TH, &regval);
+	if (ret < 0)
+		return ret;
+
+	regval = ((regval & ADP5061_VOLTAGE_TH_VTRK_DEAD_MSK) >> 3);
+	val->intval = adp5061_vmin[regval] * 1000;
+
+	return ret;
+}
+
+static int adp5061_get_chg_volt_lim(struct adp5061_state *st,
+				    union power_supply_propval *val)
+{
+	unsigned int regval;
+	int mode, ret;
+
+	ret = regmap_read(st->regmap, ADP5061_TERM_SET, &regval);
+	if (ret < 0)
+		return ret;
+
+	mode = ADP5061_TERM_SET_CHG_VLIM_MODE(regval);
+	val->intval = adp5061_const_chg_vmax[mode] * 1000;
+
+	return ret;
+}
+
+static int adp5061_get_max_voltage(struct adp5061_state *st,
+				   union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADP5061_TERM_SET, &regval);
+	if (ret < 0)
+		return ret;
+
+	regval = ((regval & ADP5061_TERM_SET_VTRM_MSK) >> 2) - 0x0F;
+	if (regval >= ARRAY_SIZE(adp5061_vmax))
+		regval = ARRAY_SIZE(adp5061_vmax) - 1;
+
+	val->intval = adp5061_vmax[regval] * 1000;
+
+	return ret;
+}
+
+static int adp5061_set_max_voltage(struct adp5061_state *st, int val)
+{
+	int vmax_index;
+
+	/* Convert from uV to mV */
+	val /= 1000;
+	if (val > 4500)
+		val = 4500;
+
+	vmax_index = adp5061_get_array_index(adp5061_vmax,
+					     ARRAY_SIZE(adp5061_vmax), val);
+	if (vmax_index < 0)
+		return vmax_index;
+
+	vmax_index += 0x0F;
+
+	return regmap_update_bits(st->regmap, ADP5061_TERM_SET,
+				  ADP5061_TERM_SET_VTRM_MSK,
+				  ADP5061_TERM_SET_VTRM_MODE(vmax_index));
+}
+
+static int adp5061_set_const_chg_vmax(struct adp5061_state *st, int val)
+{
+	int index;
+
+	/* Convert from uV to mV */
+	val /= 1000;
+	index = adp5061_get_array_index(adp5061_const_chg_vmax,
+					ARRAY_SIZE(adp5061_const_chg_vmax),
+					val);
+	if (index < 0)
+		return index;
+
+	return regmap_update_bits(st->regmap, ADP5061_TERM_SET,
+				  ADP5061_TERM_SET_CHG_VLIM_MSK,
+				  ADP5061_TERM_SET_CHG_VLIM_MODE(index));
+}
+
+static int adp5061_set_const_chg_current(struct adp5061_state *st, int val)
+{
+
+	int index;
+
+	/* Convert from uA to mA */
+	val /= 1000;
+	if (val > ADP5061_ICHG_MAX)
+		val = ADP5061_ICHG_MAX;
+
+	index = adp5061_get_array_index(adp5061_const_ichg,
+					ARRAY_SIZE(adp5061_const_ichg),
+					val);
+	if (index < 0)
+		return index;
+
+	return regmap_update_bits(st->regmap, ADP5061_CHG_CURR,
+				  ADP5061_CHG_CURR_ICHG_MSK,
+				  ADP5061_CHG_CURR_ICHG_MODE(index));
+}
+
+static int adp5061_get_const_chg_current(struct adp5061_state *st,
+		union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADP5061_CHG_CURR, &regval);
+	if (ret < 0)
+		return ret;
+
+	regval = ((regval & ADP5061_CHG_CURR_ICHG_MSK) >> 2);
+	if (regval >= ARRAY_SIZE(adp5061_const_ichg))
+		regval = ARRAY_SIZE(adp5061_const_ichg) - 1;
+
+	val->intval = adp5061_const_ichg[regval] * 1000;
+
+	return ret;
+}
+
+static int adp5061_get_prechg_current(struct adp5061_state *st,
+				      union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADP5061_CHG_CURR, &regval);
+	if (ret < 0)
+		return ret;
+
+	regval &= ADP5061_CHG_CURR_ITRK_DEAD_MSK;
+	val->intval = adp5061_prechg_current[regval] * 1000;
+
+	return ret;
+}
+
+static int adp5061_set_prechg_current(struct adp5061_state *st, int val)
+{
+	int index;
+
+	/* Convert from uA to mA */
+	val /= 1000;
+	index = adp5061_get_array_index(adp5061_prechg_current,
+					ARRAY_SIZE(adp5061_prechg_current),
+					val);
+	if (index < 0)
+		return index;
+
+	return regmap_update_bits(st->regmap, ADP5061_CHG_CURR,
+				  ADP5061_CHG_CURR_ITRK_DEAD_MSK,
+				  ADP5061_CHG_CURR_ITRK_DEAD_MODE(index));
+}
+
+static int adp5061_get_vweak_th(struct adp5061_state *st,
+				union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADP5061_VOLTAGE_TH, &regval);
+	if (ret < 0)
+		return ret;
+
+	regval &= ADP5061_VOLTAGE_TH_VWEAK_MSK;
+	val->intval = adp5061_vweak_th[regval] * 1000;
+
+	return ret;
+}
+
+static int adp5061_set_vweak_th(struct adp5061_state *st, int val)
+{
+	int index;
+
+	/* Convert from uV to mV */
+	val /= 1000;
+	index = adp5061_get_array_index(adp5061_vweak_th,
+					ARRAY_SIZE(adp5061_vweak_th),
+					val);
+	if (index < 0)
+		return index;
+
+	return regmap_update_bits(st->regmap, ADP5061_VOLTAGE_TH,
+				  ADP5061_VOLTAGE_TH_VWEAK_MSK,
+				  ADP5061_VOLTAGE_TH_VWEAK_MODE(index));
+}
+
+static int adp5061_get_chg_type(struct adp5061_state *st,
+				union power_supply_propval *val)
+{
+	u8 status1, status2;
+	int chg_type, ret;
+
+	ret = adp5061_get_status(st, &status1, &status2);
+	if (ret < 0)
+		return ret;
+
+	chg_type = adp5061_chg_type[ADP5061_CHG_STATUS_1_CHG_STATUS(status1)];
+	if (chg_type > ADP5061_CHG_FAST_CV)
+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+	else
+		val->intval = chg_type;
+
+	return ret;
+}
+
+static int adp5061_get_charger_status(struct adp5061_state *st,
+				      union power_supply_propval *val)
+{
+	u8 status1, status2;
+	int ret;
+
+	ret = adp5061_get_status(st, &status1, &status2);
+	if (ret < 0)
+		return ret;
+
+	switch (ADP5061_CHG_STATUS_1_CHG_STATUS(status1)) {
+	case ADP5061_CHG_OFF:
+		val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	case ADP5061_CHG_TRICKLE:
+	case ADP5061_CHG_FAST_CC:
+	case ADP5061_CHG_FAST_CV:
+		val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case ADP5061_CHG_COMPLETE:
+		val->intval = POWER_SUPPLY_STATUS_FULL;
+		break;
+	case ADP5061_CHG_TIMER_EXP:
+		/* The battery must be discharging if there is a charge fault */
+		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	default:
+		val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+	}
+
+	return ret;
+}
+
+static int adp5061_get_battery_status(struct adp5061_state *st,
+				      union power_supply_propval *val)
+{
+	u8 status1, status2;
+	int ret;
+
+	ret = adp5061_get_status(st, &status1, &status2);
+	if (ret < 0)
+		return ret;
+
+	switch (ADP5061_CHG_STATUS_2_BAT_STATUS(status2)) {
+	case 0x0: /* Battery monitor off */
+	case 0x1: /* No battery */
+		val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+		break;
+	case 0x2: /* VBAT < VTRK */
+		val->intval = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+		break;
+	case 0x3: /* VTRK < VBAT_SNS < VWEAK */
+		val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+		break;
+	case 0x4: /* VBAT_SNS > VWEAK */
+		val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int adp5061_get_termination_current(struct adp5061_state *st,
+					   union power_supply_propval *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(st->regmap, ADP5061_IEND, &regval);
+	if (ret < 0)
+		return ret;
+
+	regval = (regval & ADP5061_IEND_IEND_MSK) >> 5;
+	val->intval = adp5061_iend[regval];
+
+	return ret;
+}
+
+static int adp5061_set_termination_current(struct adp5061_state *st, int val)
+{
+	int index;
+
+	index = adp5061_get_array_index(adp5061_iend,
+					ARRAY_SIZE(adp5061_iend),
+					val);
+	if (index < 0)
+		return index;
+
+	return regmap_update_bits(st->regmap, ADP5061_IEND,
+				  ADP5061_IEND_IEND_MSK,
+				  ADP5061_IEND_IEND_MODE(index));
+}
+
+static int adp5061_get_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct adp5061_state *st = power_supply_get_drvdata(psy);
+	u8 status1, status2;
+	int mode, ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		ret = adp5061_get_status(st, &status1, &status2);
+		if (ret < 0)
+			return ret;
+
+		mode = ADP5061_CHG_STATUS_2_BAT_STATUS(status2);
+		if (mode == ADP5061_NO_BATTERY)
+			val->intval = 0;
+		else
+			val->intval = 1;
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_TYPE:
+		return adp5061_get_chg_type(st, val);
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		/* This property is used to indicate the input current
+		 * limit into VINx (ILIM)
+		 */
+		return adp5061_get_input_current_limit(st, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		/* This property is used to indicate the termination
+		 * voltage (VTRM)
+		 */
+		return adp5061_get_max_voltage(st, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		/*
+		 * This property is used to indicate the trickle to fast
+		 * charge threshold (VTRK_DEAD)
+		 */
+		return adp5061_get_min_voltage(st, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		/* This property is used to indicate the charging
+		 * voltage limit (CHG_VLIM)
+		 */
+		return adp5061_get_chg_volt_lim(st, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		/*
+		 * This property is used to indicate the value of the constant
+		 * current charge (ICHG)
+		 */
+		return adp5061_get_const_chg_current(st, val);
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		/*
+		 * This property is used to indicate the value of the trickle
+		 * and weak charge currents (ITRK_DEAD)
+		 */
+		return adp5061_get_prechg_current(st, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		/*
+		 * This property is used to set the VWEAK threshold
+		 * bellow this value, weak charge mode is entered
+		 * above this value, fast chargerge mode is entered
+		 */
+		return adp5061_get_vweak_th(st, val);
+	case POWER_SUPPLY_PROP_STATUS:
+		/*
+		 * Indicate the charger status in relation to power
+		 * supply status property
+		 */
+		return adp5061_get_charger_status(st, val);
+	case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+		/*
+		 * Indicate the battery status in relation to power
+		 * supply capacity level property
+		 */
+		return adp5061_get_battery_status(st, val);
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		/* Indicate the values of the termination current */
+		return adp5061_get_termination_current(st, val);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int adp5061_set_property(struct power_supply *psy,
+				enum power_supply_property psp,
+				const union power_supply_propval *val)
+{
+	struct adp5061_state *st = power_supply_get_drvdata(psy);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+		return adp5061_set_input_current_limit(st, val->intval);
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+		return adp5061_set_max_voltage(st, val->intval);
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+		return adp5061_set_min_voltage(st, val->intval);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		return adp5061_set_const_chg_vmax(st, val->intval);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		return adp5061_set_const_chg_current(st, val->intval);
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+		return adp5061_set_prechg_current(st, val->intval);
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		return adp5061_set_vweak_th(st, val->intval);
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		return adp5061_set_termination_current(st, val->intval);
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int adp5061_prop_writeable(struct power_supply *psy,
+				  enum power_supply_property psp)
+{
+	switch (psp) {
+	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+		return 1;
+	default:
+		return 0;
+	}
+}
+
+static enum power_supply_property adp5061_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_CHARGE_TYPE,
+	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+};
+
+static const struct regmap_config adp5061_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static const struct power_supply_desc adp5061_desc = {
+	.name			= "adp5061",
+	.type			= POWER_SUPPLY_TYPE_USB,
+	.get_property		= adp5061_get_property,
+	.set_property		= adp5061_set_property,
+	.property_is_writeable	= adp5061_prop_writeable,
+	.properties		= adp5061_props,
+	.num_properties		= ARRAY_SIZE(adp5061_props),
+};
+
+static int adp5061_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct power_supply_config psy_cfg = {};
+	struct adp5061_state *st;
+
+	st = devm_kzalloc(&client->dev, sizeof(*st), GFP_KERNEL);
+	if (!st)
+		return -ENOMEM;
+
+	st->client = client;
+	st->regmap = devm_regmap_init_i2c(client,
+					  &adp5061_regmap_config);
+	if (IS_ERR(st->regmap)) {
+		dev_err(&client->dev, "Failed to initialize register map\n");
+		return -EINVAL;
+	}
+
+	i2c_set_clientdata(client, st);
+	psy_cfg.drv_data = st;
+
+	st->psy = devm_power_supply_register(&client->dev,
+					     &adp5061_desc,
+					     &psy_cfg);
+
+	if (IS_ERR(st->psy)) {
+		dev_err(&client->dev, "Failed to register power supply\n");
+		return PTR_ERR(st->psy);
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id adp5061_id[] = {
+	{ "adp5061", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adp5061_id);
+
+static struct i2c_driver adp5061_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+	},
+	.probe = adp5061_probe,
+	.id_table = adp5061_id,
+};
+module_i2c_driver(adp5061_driver);
+
+MODULE_DESCRIPTION("Analog Devices adp5061 battery charger driver");
+MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
+MODULE_LICENSE("GPL v2");

drivers/power/supply/axp20x_usb_power.c

@@ -222,6 +222,7 @@ static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power,
 	case 100000:
 		if (power->axp20x_id == AXP221_ID)
 			return -EINVAL;
+		/* fall through */
 	case 500000:
 	case 900000:
 		val = (900000 - intval) / 400000;

drivers/power/supply/axp288_charger.c

@@ -718,7 +718,7 @@ static int charger_init_hw_regs(struct axp288_chrg_info *info)
 	}
 
 	/* Determine charge current limit */
-	cc = (ret & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
+	cc = (val & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
 	cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
 	info->cc = cc;
 

drivers/power/supply/bq27xxx_battery.c

@@ -26,7 +26,6 @@
  * http://www.ti.com/product/bq27510-g1
  * http://www.ti.com/product/bq27510-g2
  * http://www.ti.com/product/bq27510-g3
- * http://www.ti.com/product/bq27520-g4
  * http://www.ti.com/product/bq27520-g1
  * http://www.ti.com/product/bq27520-g2
  * http://www.ti.com/product/bq27520-g3
@@ -40,7 +39,9 @@
  * http://www.ti.com/product/bq27545-g1
  * http://www.ti.com/product/bq27421-g1
  * http://www.ti.com/product/bq27425-g1
+ * http://www.ti.com/product/bq27426
  * http://www.ti.com/product/bq27411-g1
+ * http://www.ti.com/product/bq27441-g1
  * http://www.ti.com/product/bq27621-g1
  */
 

drivers/power/supply/cros_usbpd-charger.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Power supply driver for ChromeOS EC based USB PD Charger.
+ *
+ * Copyright (c) 2014 - 2018 Google, Inc
+ */
+
+#include <linux/module.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#define CHARGER_DIR_NAME			"CROS_USBPD_CHARGER%d"
+#define CHARGER_DIR_NAME_LENGTH			sizeof(CHARGER_DIR_NAME)
+#define CHARGER_CACHE_UPDATE_DELAY		msecs_to_jiffies(500)
+#define CHARGER_MANUFACTURER_MODEL_LENGTH	32
+
+#define DRV_NAME "cros-usbpd-charger"
+
+struct port_data {
+	int port_number;
+	char name[CHARGER_DIR_NAME_LENGTH];
+	char manufacturer[CHARGER_MANUFACTURER_MODEL_LENGTH];
+	char model_name[CHARGER_MANUFACTURER_MODEL_LENGTH];
+	struct power_supply *psy;
+	struct power_supply_desc psy_desc;
+	int psy_usb_type;
+	int psy_online;
+	int psy_status;
+	int psy_current_max;
+	int psy_voltage_max_design;
+	int psy_voltage_now;
+	int psy_power_max;
+	struct charger_data *charger;
+	unsigned long last_update;
+};
+
+struct charger_data {
+	struct device *dev;
+	struct cros_ec_dev *ec_dev;
+	struct cros_ec_device *ec_device;
+	int num_charger_ports;
+	int num_registered_psy;
+	struct port_data *ports[EC_USB_PD_MAX_PORTS];
+	struct notifier_block notifier;
+};
+
+static enum power_supply_property cros_usbpd_charger_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_MODEL_NAME,
+	POWER_SUPPLY_PROP_MANUFACTURER,
+	POWER_SUPPLY_PROP_USB_TYPE
+};
+
+static enum power_supply_usb_type cros_usbpd_charger_usb_types[] = {
+	POWER_SUPPLY_USB_TYPE_UNKNOWN,
+	POWER_SUPPLY_USB_TYPE_SDP,
+	POWER_SUPPLY_USB_TYPE_DCP,
+	POWER_SUPPLY_USB_TYPE_CDP,
+	POWER_SUPPLY_USB_TYPE_C,
+	POWER_SUPPLY_USB_TYPE_PD,
+	POWER_SUPPLY_USB_TYPE_PD_DRP,
+	POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID
+};
+
+static int cros_usbpd_charger_ec_command(struct charger_data *charger,
+					 unsigned int version,
+					 unsigned int command,
+					 void *outdata,
+					 unsigned int outsize,
+					 void *indata,
+					 unsigned int insize)
+{
+	struct cros_ec_dev *ec_dev = charger->ec_dev;
+	struct cros_ec_command *msg;
+	int ret;
+
+	msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL);
+	if (!msg)
+		return -ENOMEM;
+
+	msg->version = version;
+	msg->command = ec_dev->cmd_offset + command;
+	msg->outsize = outsize;
+	msg->insize = insize;
+
+	if (outsize)
+		memcpy(msg->data, outdata, outsize);
+
+	ret = cros_ec_cmd_xfer_status(charger->ec_device, msg);
+	if (ret >= 0 && insize)
+		memcpy(indata, msg->data, insize);
+
+	kfree(msg);
+	return ret;
+}
+
+static int cros_usbpd_charger_get_num_ports(struct charger_data *charger)
+{
+	struct ec_response_usb_pd_ports resp;
+	int ret;
+
+	ret = cros_usbpd_charger_ec_command(charger, 0, EC_CMD_USB_PD_PORTS,
+					    NULL, 0, &resp, sizeof(resp));
+	if (ret < 0) {
+		dev_err(charger->dev,
+			"Unable to get the number or ports (err:0x%x)\n", ret);
+		return ret;
+	}
+
+	return resp.num_ports;
+}
+
+static int cros_usbpd_charger_get_discovery_info(struct port_data *port)
+{
+	struct charger_data *charger = port->charger;
+	struct ec_params_usb_pd_discovery_entry resp;
+	struct ec_params_usb_pd_info_request req;
+	int ret;
+
+	req.port = port->port_number;
+
+	ret = cros_usbpd_charger_ec_command(charger, 0,
+					    EC_CMD_USB_PD_DISCOVERY,
+					    &req, sizeof(req),
+					    &resp, sizeof(resp));
+	if (ret < 0) {
+		dev_err(charger->dev,
+			"Unable to query discovery info (err:0x%x)\n", ret);
+		return ret;
+	}
+
+	dev_dbg(charger->dev, "Port %d: VID = 0x%x, PID=0x%x, PTYPE=0x%x\n",
+		port->port_number, resp.vid, resp.pid, resp.ptype);
+
+	snprintf(port->manufacturer, sizeof(port->manufacturer), "%x",
+		 resp.vid);
+	snprintf(port->model_name, sizeof(port->model_name), "%x", resp.pid);
+
+	return 0;
+}
+
+static int cros_usbpd_charger_get_power_info(struct port_data *port)
+{
+	struct charger_data *charger = port->charger;
+	struct ec_response_usb_pd_power_info resp;
+	struct ec_params_usb_pd_power_info req;
+	int last_psy_status, last_psy_usb_type;
+	struct device *dev = charger->dev;
+	int ret;
+
+	req.port = port->port_number;
+	ret = cros_usbpd_charger_ec_command(charger, 0,
+					    EC_CMD_USB_PD_POWER_INFO,
+					    &req, sizeof(req),
+					    &resp, sizeof(resp));
+	if (ret < 0) {
+		dev_err(dev, "Unable to query PD power info (err:0x%x)\n", ret);
+		return ret;
+	}
+
+	last_psy_status = port->psy_status;
+	last_psy_usb_type = port->psy_usb_type;
+
+	switch (resp.role) {
+	case USB_PD_PORT_POWER_DISCONNECTED:
+		port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		port->psy_online = 0;
+		break;
+	case USB_PD_PORT_POWER_SOURCE:
+		port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		port->psy_online = 0;
+		break;
+	case USB_PD_PORT_POWER_SINK:
+		port->psy_status = POWER_SUPPLY_STATUS_CHARGING;
+		port->psy_online = 1;
+		break;
+	case USB_PD_PORT_POWER_SINK_NOT_CHARGING:
+		port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		port->psy_online = 1;
+		break;
+	default:
+		dev_err(dev, "Unknown role %d\n", resp.role);
+		break;
+	}
+
+	port->psy_voltage_max_design = resp.meas.voltage_max;
+	port->psy_voltage_now = resp.meas.voltage_now;
+	port->psy_current_max = resp.meas.current_max;
+	port->psy_power_max = resp.max_power;
+
+	switch (resp.type) {
+	case USB_CHG_TYPE_BC12_SDP:
+	case USB_CHG_TYPE_VBUS:
+		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
+		break;
+	case USB_CHG_TYPE_NONE:
+		/*
+		 * For dual-role devices when we are a source, the firmware
+		 * reports the type as NONE. Report such chargers as type
+		 * USB_PD_DRP.
+		 */
+		if (resp.role == USB_PD_PORT_POWER_SOURCE && resp.dualrole)
+			port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD_DRP;
+		else
+			port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
+		break;
+	case USB_CHG_TYPE_OTHER:
+	case USB_CHG_TYPE_PROPRIETARY:
+		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID;
+		break;
+	case USB_CHG_TYPE_C:
+		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_C;
+		break;
+	case USB_CHG_TYPE_BC12_DCP:
+		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_DCP;
+		break;
+	case USB_CHG_TYPE_BC12_CDP:
+		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_CDP;
+		break;
+	case USB_CHG_TYPE_PD:
+		if (resp.dualrole)
+			port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD_DRP;
+		else
+			port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD;
+		break;
+	case USB_CHG_TYPE_UNKNOWN:
+		/*
+		 * While the EC is trying to determine the type of charger that
+		 * has been plugged in, it will report the charger type as
+		 * unknown. Additionally since the power capabilities are
+		 * unknown, report the max current and voltage as zero.
+		 */
+		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+		port->psy_voltage_max_design = 0;
+		port->psy_current_max = 0;
+		break;
+	default:
+		dev_err(dev, "Port %d: default case!\n", port->port_number);
+		port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
+	}
+
+	port->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+
+	dev_dbg(dev,
+		"Port %d: type=%d vmax=%d vnow=%d cmax=%d clim=%d pmax=%d\n",
+		port->port_number, resp.type, resp.meas.voltage_max,
+		resp.meas.voltage_now, resp.meas.current_max,
+		resp.meas.current_lim, resp.max_power);
+
+	/*
+	 * If power supply type or status changed, explicitly call
+	 * power_supply_changed. This results in udev event getting generated
+	 * and allows user mode apps to react quicker instead of waiting for
+	 * their next poll of power supply status.
+	 */
+	if (last_psy_usb_type != port->psy_usb_type ||
+	    last_psy_status != port->psy_status)
+		power_supply_changed(port->psy);
+
+	return 0;
+}
+
+static int cros_usbpd_charger_get_port_status(struct port_data *port,
+					      bool ratelimit)
+{
+	int ret;
+
+	if (ratelimit &&
+	    time_is_after_jiffies(port->last_update +
+				  CHARGER_CACHE_UPDATE_DELAY))
+		return 0;
+
+	ret = cros_usbpd_charger_get_power_info(port);
+	if (ret < 0)
+		return ret;
+
+	ret = cros_usbpd_charger_get_discovery_info(port);
+	port->last_update = jiffies;
+
+	return ret;
+}
+
+static void cros_usbpd_charger_power_changed(struct power_supply *psy)
+{
+	struct port_data *port = power_supply_get_drvdata(psy);
+	struct charger_data *charger = port->charger;
+	int i;
+
+	for (i = 0; i < charger->num_registered_psy; i++)
+		cros_usbpd_charger_get_port_status(charger->ports[i], false);
+}
+
+static int cros_usbpd_charger_get_prop(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       union power_supply_propval *val)
+{
+	struct port_data *port = power_supply_get_drvdata(psy);
+	struct charger_data *charger = port->charger;
+	struct cros_ec_device *ec_device = charger->ec_device;
+	struct device *dev = charger->dev;
+	int ret;
+
+	/* Only refresh ec_port_status for dynamic properties */
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		/*
+		 * If mkbp_event_supported, then we can be assured that
+		 * the driver's state for the online property is consistent
+		 * with the hardware. However, if we aren't event driven,
+		 * the optimization before to skip an ec_port_status get
+		 * and only returned cached values of the online property will
+		 * cause a delay in detecting a cable attach until one of the
+		 * other properties are read.
+		 *
+		 * Allow an ec_port_status refresh for online property check
+		 * if we're not already online to check for plug events if
+		 * not mkbp_event_supported.
+		 */
+		if (ec_device->mkbp_event_supported || port->psy_online)
+			break;
+		/* fall through */
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = cros_usbpd_charger_get_port_status(port, true);
+		if (ret < 0) {
+			dev_err(dev, "Failed to get port status (err:0x%x)\n",
+				ret);
+			return -EINVAL;
+		}
+		break;
+	default:
+		break;
+	}
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = port->psy_online;
+		break;
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = port->psy_status;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		val->intval = port->psy_current_max * 1000;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = port->psy_voltage_max_design * 1000;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = port->psy_voltage_now * 1000;
+		break;
+	case POWER_SUPPLY_PROP_USB_TYPE:
+		val->intval = port->psy_usb_type;
+		break;
+	case POWER_SUPPLY_PROP_MODEL_NAME:
+		val->strval = port->model_name;
+		break;
+	case POWER_SUPPLY_PROP_MANUFACTURER:
+		val->strval = port->manufacturer;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int cros_usbpd_charger_ec_event(struct notifier_block *nb,
+				       unsigned long queued_during_suspend,
+				       void *_notify)
+{
+	struct cros_ec_device *ec_device;
+	struct charger_data *charger;
+	struct device *dev;
+	u32 host_event;
+
+	charger = container_of(nb, struct charger_data, notifier);
+	ec_device = charger->ec_device;
+	dev = charger->dev;
+
+	host_event = cros_ec_get_host_event(ec_device);
+	if (host_event & EC_HOST_EVENT_MASK(EC_HOST_EVENT_PD_MCU)) {
+		cros_usbpd_charger_power_changed(charger->ports[0]->psy);
+		return NOTIFY_OK;
+	} else {
+		return NOTIFY_DONE;
+	}
+}
+
+static void cros_usbpd_charger_unregister_notifier(void *data)
+{
+	struct charger_data *charger = data;
+	struct cros_ec_device *ec_device = charger->ec_device;
+
+	blocking_notifier_chain_unregister(&ec_device->event_notifier,
+					   &charger->notifier);
+}
+
+static int cros_usbpd_charger_probe(struct platform_device *pd)
+{
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent);
+	struct cros_ec_device *ec_device = ec_dev->ec_dev;
+	struct power_supply_desc *psy_desc;
+	struct device *dev = &pd->dev;
+	struct charger_data *charger;
+	struct power_supply *psy;
+	struct port_data *port;
+	int ret = -EINVAL;
+	int i;
+
+	charger = devm_kzalloc(dev, sizeof(struct charger_data),
+			       GFP_KERNEL);
+	if (!charger)
+		return -ENOMEM;
+
+	charger->dev = dev;
+	charger->ec_dev = ec_dev;
+	charger->ec_device = ec_device;
+
+	platform_set_drvdata(pd, charger);
+
+	charger->num_charger_ports = cros_usbpd_charger_get_num_ports(charger);
+	if (charger->num_charger_ports <= 0) {
+		/*
+		 * This can happen on a system that doesn't support USB PD.
+		 * Log a message, but no need to warn.
+		 */
+		dev_info(dev, "No charging ports found\n");
+		ret = -ENODEV;
+		goto fail_nowarn;
+	}
+
+	for (i = 0; i < charger->num_charger_ports; i++) {
+		struct power_supply_config psy_cfg = {};
+
+		port = devm_kzalloc(dev, sizeof(struct port_data), GFP_KERNEL);
+		if (!port) {
+			ret = -ENOMEM;
+			goto fail;
+		}
+
+		port->charger = charger;
+		port->port_number = i;
+		sprintf(port->name, CHARGER_DIR_NAME, i);
+
+		psy_desc = &port->psy_desc;
+		psy_desc->name = port->name;
+		psy_desc->type = POWER_SUPPLY_TYPE_USB;
+		psy_desc->get_property = cros_usbpd_charger_get_prop;
+		psy_desc->external_power_changed =
+					cros_usbpd_charger_power_changed;
+		psy_desc->properties = cros_usbpd_charger_props;
+		psy_desc->num_properties =
+					ARRAY_SIZE(cros_usbpd_charger_props);
+		psy_desc->usb_types = cros_usbpd_charger_usb_types;
+		psy_desc->num_usb_types =
+				ARRAY_SIZE(cros_usbpd_charger_usb_types);
+		psy_cfg.drv_data = port;
+
+		psy = devm_power_supply_register_no_ws(dev, psy_desc,
+						       &psy_cfg);
+		if (IS_ERR(psy)) {
+			dev_err(dev, "Failed to register power supply\n");
+			continue;
+		}
+		port->psy = psy;
+
+		charger->ports[charger->num_registered_psy++] = port;
+	}
+
+	if (!charger->num_registered_psy) {
+		ret = -ENODEV;
+		dev_err(dev, "No power supplies registered\n");
+		goto fail;
+	}
+
+	if (ec_device->mkbp_event_supported) {
+		/* Get PD events from the EC */
+		charger->notifier.notifier_call = cros_usbpd_charger_ec_event;
+		ret = blocking_notifier_chain_register(
+						&ec_device->event_notifier,
+						&charger->notifier);
+		if (ret < 0) {
+			dev_warn(dev, "failed to register notifier\n");
+		} else {
+			ret = devm_add_action_or_reset(dev,
+					cros_usbpd_charger_unregister_notifier,
+					charger);
+			if (ret < 0)
+				goto fail;
+		}
+	}
+
+	return 0;
+
+fail:
+	WARN(1, "%s: Failing probe (err:0x%x)\n", dev_name(dev), ret);
+
+fail_nowarn:
+	dev_info(dev, "Failing probe (err:0x%x)\n", ret);
+	return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cros_usbpd_charger_resume(struct device *dev)
+{
+	struct charger_data *charger = dev_get_drvdata(dev);
+	int i;
+
+	if (!charger)
+		return 0;
+
+	for (i = 0; i < charger->num_registered_psy; i++) {
+		power_supply_changed(charger->ports[i]->psy);
+		charger->ports[i]->last_update =
+				jiffies - CHARGER_CACHE_UPDATE_DELAY;
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_usbpd_charger_pm_ops, NULL,
+			 cros_usbpd_charger_resume);
+
+static struct platform_driver cros_usbpd_charger_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.pm = &cros_usbpd_charger_pm_ops,
+	},
+	.probe = cros_usbpd_charger_probe
+};
+
+module_platform_driver(cros_usbpd_charger_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC USBPD charger");
+MODULE_ALIAS("platform:" DRV_NAME);

drivers/power/supply/ds2760_battery.c

@@ -27,9 +27,64 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/power_supply.h>
-
+#include <linux/suspend.h>
 #include <linux/w1.h>
-#include "../../w1/slaves/w1_ds2760.h"
+#include <linux/of.h>
+
+static unsigned int cache_time = 1000;
+module_param(cache_time, uint, 0644);
+MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+
+static bool pmod_enabled;
+module_param(pmod_enabled, bool, 0644);
+MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
+
+static unsigned int rated_capacity;
+module_param(rated_capacity, uint, 0644);
+MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
+
+static unsigned int current_accum;
+module_param(current_accum, uint, 0644);
+MODULE_PARM_DESC(current_accum, "current accumulator value");
+
+#define W1_FAMILY_DS2760		0x30
+
+/* Known commands to the DS2760 chip */
+#define W1_DS2760_SWAP			0xAA
+#define W1_DS2760_READ_DATA		0x69
+#define W1_DS2760_WRITE_DATA		0x6C
+#define W1_DS2760_COPY_DATA		0x48
+#define W1_DS2760_RECALL_DATA		0xB8
+#define W1_DS2760_LOCK			0x6A
+
+/* Number of valid register addresses */
+#define DS2760_DATA_SIZE		0x40
+
+#define DS2760_PROTECTION_REG		0x00
+
+#define DS2760_STATUS_REG		0x01
+#define DS2760_STATUS_IE		(1 << 2)
+#define DS2760_STATUS_SWEN		(1 << 3)
+#define DS2760_STATUS_RNAOP		(1 << 4)
+#define DS2760_STATUS_PMOD		(1 << 5)
+
+#define DS2760_EEPROM_REG		0x07
+#define DS2760_SPECIAL_FEATURE_REG	0x08
+#define DS2760_VOLTAGE_MSB		0x0c
+#define DS2760_VOLTAGE_LSB		0x0d
+#define DS2760_CURRENT_MSB		0x0e
+#define DS2760_CURRENT_LSB		0x0f
+#define DS2760_CURRENT_ACCUM_MSB	0x10
+#define DS2760_CURRENT_ACCUM_LSB	0x11
+#define DS2760_TEMP_MSB			0x18
+#define DS2760_TEMP_LSB			0x19
+#define DS2760_EEPROM_BLOCK0		0x20
+#define DS2760_ACTIVE_FULL		0x20
+#define DS2760_EEPROM_BLOCK1		0x30
+#define DS2760_STATUS_WRITE_REG		0x31
+#define DS2760_RATED_CAPACITY		0x32
+#define DS2760_CURRENT_OFFSET_BIAS	0x33
+#define DS2760_ACTIVE_EMPTY		0x3b
 
 struct ds2760_device_info {
 	struct device *dev;
@@ -55,28 +110,113 @@ struct ds2760_device_info {
 	int full_counter;
 	struct power_supply *bat;
 	struct power_supply_desc bat_desc;
-	struct device *w1_dev;
 	struct workqueue_struct *monitor_wqueue;
 	struct delayed_work monitor_work;
 	struct delayed_work set_charged_work;
+	struct notifier_block pm_notifier;
 };
 
-static unsigned int cache_time = 1000;
-module_param(cache_time, uint, 0644);
-MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
+			int io)
+{
+	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
 
-static bool pmod_enabled;
-module_param(pmod_enabled, bool, 0644);
-MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
+	if (!dev)
+		return 0;
 
-static unsigned int rated_capacity;
-module_param(rated_capacity, uint, 0644);
-MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
+	mutex_lock(&sl->master->bus_mutex);
 
-static unsigned int current_accum;
-module_param(current_accum, uint, 0644);
-MODULE_PARM_DESC(current_accum, "current accumulator value");
+	if (addr > DS2760_DATA_SIZE || addr < 0) {
+		count = 0;
+		goto out;
+	}
+	if (addr + count > DS2760_DATA_SIZE)
+		count = DS2760_DATA_SIZE - addr;
+
+	if (!w1_reset_select_slave(sl)) {
+		if (!io) {
+			w1_write_8(sl->master, W1_DS2760_READ_DATA);
+			w1_write_8(sl->master, addr);
+			count = w1_read_block(sl->master, buf, count);
+		} else {
+			w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
+			w1_write_8(sl->master, addr);
+			w1_write_block(sl->master, buf, count);
+			/* XXX w1_write_block returns void, not n_written */
+		}
+	}
+
+out:
+	mutex_unlock(&sl->master->bus_mutex);
+
+	return count;
+}
+
+static int w1_ds2760_read(struct device *dev,
+			  char *buf, int addr,
+			  size_t count)
+{
+	return w1_ds2760_io(dev, buf, addr, count, 0);
+}
+
+static int w1_ds2760_write(struct device *dev,
+			   char *buf,
+			   int addr, size_t count)
+{
+	return w1_ds2760_io(dev, buf, addr, count, 1);
+}
+
+static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
+{
+	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+	if (!dev)
+		return -EINVAL;
+
+	mutex_lock(&sl->master->bus_mutex);
+
+	if (w1_reset_select_slave(sl) == 0) {
+		w1_write_8(sl->master, cmd);
+		w1_write_8(sl->master, addr);
+	}
+
+	mutex_unlock(&sl->master->bus_mutex);
+	return 0;
+}
+
+static int w1_ds2760_store_eeprom(struct device *dev, int addr)
+{
+	return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_COPY_DATA);
+}
+
+static int w1_ds2760_recall_eeprom(struct device *dev, int addr)
+{
+	return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_RECALL_DATA);
+}
+
+static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
+			     struct bin_attribute *bin_attr, char *buf,
+			     loff_t off, size_t count)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	return w1_ds2760_read(dev, buf, off, count);
+}
+
+static BIN_ATTR_RO(w1_slave, DS2760_DATA_SIZE);
+
+static struct bin_attribute *w1_ds2760_bin_attrs[] = {
+	&bin_attr_w1_slave,
+	NULL,
+};
+
+static const struct attribute_group w1_ds2760_group = {
+	.bin_attrs = w1_ds2760_bin_attrs,
+};
 
+static const struct attribute_group *w1_ds2760_groups[] = {
+	&w1_ds2760_group,
+	NULL,
+};
 /* Some batteries have their rated capacity stored a N * 10 mAh, while
  * others use an index into this table. */
 static int rated_capacities[] = {
@@ -138,10 +278,10 @@ static int ds2760_battery_read_status(struct ds2760_device_info *di)
 		count = DS2760_TEMP_LSB - start + 1;
 	}
 
-	ret = w1_ds2760_read(di->w1_dev, di->raw + start, start, count);
+	ret = w1_ds2760_read(di->dev, di->raw + start, start, count);
 	if (ret != count) {
 		dev_warn(di->dev, "call to w1_ds2760_read failed (0x%p)\n",
-			 di->w1_dev);
+			 di->dev);
 		return 1;
 	}
 
@@ -242,7 +382,7 @@ static void ds2760_battery_set_current_accum(struct ds2760_device_info *di,
 	acr[0] = acr_val >> 8;
 	acr[1] = acr_val & 0xff;
 
-	if (w1_ds2760_write(di->w1_dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
+	if (w1_ds2760_write(di->dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
 		dev_warn(di->dev, "ACR write failed\n");
 }
 
@@ -297,9 +437,9 @@ static void ds2760_battery_write_status(struct ds2760_device_info *di,
 	if (status == di->raw[DS2760_STATUS_REG])
 		return;
 
-	w1_ds2760_write(di->w1_dev, &status, DS2760_STATUS_WRITE_REG, 1);
-	w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
-	w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_write(di->dev, &status, DS2760_STATUS_WRITE_REG, 1);
+	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
 }
 
 static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di,
@@ -308,9 +448,9 @@ static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di,
 	if (rated_capacity == di->raw[DS2760_RATED_CAPACITY])
 		return;
 
-	w1_ds2760_write(di->w1_dev, &rated_capacity, DS2760_RATED_CAPACITY, 1);
-	w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
-	w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_write(di->dev, &rated_capacity, DS2760_RATED_CAPACITY, 1);
+	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
 }
 
 static void ds2760_battery_write_active_full(struct ds2760_device_info *di,
@@ -325,9 +465,9 @@ static void ds2760_battery_write_active_full(struct ds2760_device_info *di,
 	    tmp[1] == di->raw[DS2760_ACTIVE_FULL + 1])
 		return;
 
-	w1_ds2760_write(di->w1_dev, tmp, DS2760_ACTIVE_FULL, sizeof(tmp));
-	w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK0);
-	w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK0);
+	w1_ds2760_write(di->dev, tmp, DS2760_ACTIVE_FULL, sizeof(tmp));
+	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK0);
+	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK0);
 
 	/* Write to the di->raw[] buffer directly - the DS2760_ACTIVE_FULL
 	 * values won't be read back by ds2760_battery_read_status() */
@@ -383,9 +523,9 @@ static void ds2760_battery_set_charged_work(struct work_struct *work)
 
 	dev_dbg(di->dev, "%s: bias = %d\n", __func__, bias);
 
-	w1_ds2760_write(di->w1_dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1);
-	w1_ds2760_store_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
-	w1_ds2760_recall_eeprom(di->w1_dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_write(di->dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1);
+	w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+	w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
 
 	/* Write to the di->raw[] buffer directly - the CURRENT_OFFSET_BIAS
 	 * value won't be read back by ds2760_battery_read_status() */
@@ -504,24 +644,55 @@ static enum power_supply_property ds2760_battery_props[] = {
 	POWER_SUPPLY_PROP_CAPACITY,
 };
 
-static int ds2760_battery_probe(struct platform_device *pdev)
+static int ds2760_pm_notifier(struct notifier_block *notifier,
+			      unsigned long pm_event,
+			      void *unused)
+{
+	struct ds2760_device_info *di =
+		container_of(notifier, struct ds2760_device_info, pm_notifier);
+
+	switch (pm_event) {
+	case PM_HIBERNATION_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+		break;
+
+	case PM_POST_RESTORE:
+	case PM_POST_HIBERNATION:
+	case PM_POST_SUSPEND:
+		di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+		power_supply_changed(di->bat);
+		mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ);
+
+		break;
+
+	case PM_RESTORE_PREPARE:
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
+static int w1_ds2760_add_slave(struct w1_slave *sl)
 {
 	struct power_supply_config psy_cfg = {};
-	char status;
-	int retval = 0;
 	struct ds2760_device_info *di;
+	struct device *dev = &sl->dev;
+	int retval = 0;
+	char name[32];
+	char status;
 
-	di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+	di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
 	if (!di) {
 		retval = -ENOMEM;
 		goto di_alloc_failed;
 	}
 
-	platform_set_drvdata(pdev, di);
+	snprintf(name, sizeof(name), "ds2760-battery.%d", dev->id);
 
-	di->dev				= &pdev->dev;
-	di->w1_dev			= pdev->dev.parent;
-	di->bat_desc.name		= dev_name(&pdev->dev);
+	di->dev				= dev;
+	di->bat_desc.name		= name;
 	di->bat_desc.type		= POWER_SUPPLY_TYPE_BATTERY;
 	di->bat_desc.properties		= ds2760_battery_props;
 	di->bat_desc.num_properties	= ARRAY_SIZE(ds2760_battery_props);
@@ -533,10 +704,30 @@ static int ds2760_battery_probe(struct platform_device *pdev)
 	di->bat_desc.external_power_changed =
 				  ds2760_battery_external_power_changed;
 
-	psy_cfg.drv_data		= di;
+	psy_cfg.drv_data = di;
+
+	if (dev->of_node) {
+		u32 tmp;
+
+		psy_cfg.of_node = dev->of_node;
+
+		if (!of_property_read_bool(dev->of_node, "maxim,pmod-enabled"))
+			pmod_enabled = true;
+
+		if (!of_property_read_u32(dev->of_node,
+					  "maxim,cache-time-ms", &tmp))
+			cache_time = tmp;
+
+		if (!of_property_read_u32(dev->of_node,
+					  "rated-capacity-microamp-hours",
+					  &tmp))
+			rated_capacity = tmp / 10; /* property is in mAh */
+	}
 
 	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
 
+	sl->family_data = di;
+
 	/* enable sleep mode feature */
 	ds2760_battery_read_status(di);
 	status = di->raw[DS2760_STATUS_REG];
@@ -547,7 +738,7 @@ static int ds2760_battery_probe(struct platform_device *pdev)
 
 	ds2760_battery_write_status(di, status);
 
-	/* set rated capacity from module param */
+	/* set rated capacity from module param or device tree */
 	if (rated_capacity)
 		ds2760_battery_write_rated_capacity(di, rated_capacity);
 
@@ -556,7 +747,7 @@ static int ds2760_battery_probe(struct platform_device *pdev)
 	if (current_accum)
 		ds2760_battery_set_current_accum(di, current_accum);
 
-	di->bat = power_supply_register(&pdev->dev, &di->bat_desc, &psy_cfg);
+	di->bat = power_supply_register(dev, &di->bat_desc, &psy_cfg);
 	if (IS_ERR(di->bat)) {
 		dev_err(di->dev, "failed to register battery\n");
 		retval = PTR_ERR(di->bat);
@@ -566,14 +757,16 @@ static int ds2760_battery_probe(struct platform_device *pdev)
 	INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
 	INIT_DELAYED_WORK(&di->set_charged_work,
 			  ds2760_battery_set_charged_work);
-	di->monitor_wqueue = alloc_ordered_workqueue(dev_name(&pdev->dev),
-						     WQ_MEM_RECLAIM);
+	di->monitor_wqueue = alloc_ordered_workqueue(name, WQ_MEM_RECLAIM);
 	if (!di->monitor_wqueue) {
 		retval = -ESRCH;
 		goto workqueue_failed;
 	}
 	queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ * 1);
 
+	di->pm_notifier.notifier_call = ds2760_pm_notifier;
+	register_pm_notifier(&di->pm_notifier);
+
 	goto success;
 
 workqueue_failed:
@@ -584,65 +777,40 @@ static int ds2760_battery_probe(struct platform_device *pdev)
 	return retval;
 }
 
-static int ds2760_battery_remove(struct platform_device *pdev)
+static void w1_ds2760_remove_slave(struct w1_slave *sl)
 {
-	struct ds2760_device_info *di = platform_get_drvdata(pdev);
+	struct ds2760_device_info *di = sl->family_data;
 
+	unregister_pm_notifier(&di->pm_notifier);
 	cancel_delayed_work_sync(&di->monitor_work);
 	cancel_delayed_work_sync(&di->set_charged_work);
 	destroy_workqueue(di->monitor_wqueue);
 	power_supply_unregister(di->bat);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-
-static int ds2760_battery_suspend(struct platform_device *pdev,
-				  pm_message_t state)
-{
-	struct ds2760_device_info *di = platform_get_drvdata(pdev);
-
-	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
-
-	return 0;
-}
-
-static int ds2760_battery_resume(struct platform_device *pdev)
-{
-	struct ds2760_device_info *di = platform_get_drvdata(pdev);
-
-	di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
-	power_supply_changed(di->bat);
-
-	mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ);
-
-	return 0;
 }
 
-#else
-
-#define ds2760_battery_suspend NULL
-#define ds2760_battery_resume NULL
-
-#endif /* CONFIG_PM */
-
-MODULE_ALIAS("platform:ds2760-battery");
+#ifdef CONFIG_OF
+static const struct of_device_id w1_ds2760_of_ids[] = {
+	{ .compatible = "maxim,ds2760" },
+	{}
+};
+#endif
 
-static struct platform_driver ds2760_battery_driver = {
-	.driver = {
-		.name = "ds2760-battery",
-	},
-	.probe	  = ds2760_battery_probe,
-	.remove   = ds2760_battery_remove,
-	.suspend  = ds2760_battery_suspend,
-	.resume	  = ds2760_battery_resume,
+static struct w1_family_ops w1_ds2760_fops = {
+	.add_slave	= w1_ds2760_add_slave,
+	.remove_slave	= w1_ds2760_remove_slave,
+	.groups		= w1_ds2760_groups,
 };
 
-module_platform_driver(ds2760_battery_driver);
+static struct w1_family w1_ds2760_family = {
+	.fid		= W1_FAMILY_DS2760,
+	.fops		= &w1_ds2760_fops,
+	.of_match_table	= of_match_ptr(w1_ds2760_of_ids),
+};
+module_w1_family(w1_ds2760_family);
 
-MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>, "
 	      "Matt Reimer <mreimer@vpop.net>, "
 	      "Anton Vorontsov <cbou@mail.ru>");
-MODULE_DESCRIPTION("ds2760 battery driver");
+MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760));

drivers/power/supply/generic-adc-battery.c

@@ -241,10 +241,10 @@ static int gab_probe(struct platform_device *pdev)
 	struct power_supply_desc *psy_desc;
 	struct power_supply_config psy_cfg = {};
 	struct gab_platform_data *pdata = pdev->dev.platform_data;
-	enum power_supply_property *properties;
 	int ret = 0;
 	int chan;
-	int index = 0;
+	int index = ARRAY_SIZE(gab_props);
+	bool any = false;
 
 	adc_bat = devm_kzalloc(&pdev->dev, sizeof(*adc_bat), GFP_KERNEL);
 	if (!adc_bat) {
@@ -278,8 +278,6 @@ static int gab_probe(struct platform_device *pdev)
 	}
 
 	memcpy(psy_desc->properties, gab_props, sizeof(gab_props));
-	properties = (enum power_supply_property *)
-			((char *)psy_desc->properties + sizeof(gab_props));
 
 	/*
 	 * getting channel from iio and copying the battery properties
@@ -293,15 +291,22 @@ static int gab_probe(struct platform_device *pdev)
 			adc_bat->channel[chan] = NULL;
 		} else {
 			/* copying properties for supported channels only */
-			memcpy(properties + sizeof(*(psy_desc->properties)) * index,
-					&gab_dyn_props[chan],
-					sizeof(gab_dyn_props[chan]));
-			index++;
+			int index2;
+
+			for (index2 = 0; index2 < index; index2++) {
+				if (psy_desc->properties[index2] ==
+				    gab_dyn_props[chan])
+					break;	/* already known */
+			}
+			if (index2 == index)	/* really new */
+				psy_desc->properties[index++] =
+					gab_dyn_props[chan];
+			any = true;
 		}
 	}
 
 	/* none of the channels are supported so let's bail out */
-	if (index == 0) {
+	if (!any) {
 		ret = -ENODEV;
 		goto second_mem_fail;
 	}
@@ -312,7 +317,7 @@ static int gab_probe(struct platform_device *pdev)
 	 * as come channels may be not be supported by the device.So
 	 * we need to take care of that.
 	 */
-	psy_desc->num_properties = ARRAY_SIZE(gab_props) + index;
+	psy_desc->num_properties = index;
 
 	adc_bat->psy = power_supply_register(&pdev->dev, psy_desc, &psy_cfg);
 	if (IS_ERR(adc_bat->psy)) {

drivers/power/supply/lego_ev3_battery.c

@@ -39,7 +39,7 @@ static int lego_ev3_battery_get_property(struct power_supply *psy,
 					 union power_supply_propval *val)
 {
 	struct lego_ev3_battery *batt = power_supply_get_drvdata(psy);
-	int val2;
+	int ret, val2;
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
@@ -47,11 +47,18 @@ static int lego_ev3_battery_get_property(struct power_supply *psy,
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 		/* battery voltage is iio channel * 2 + Vce of transistor */
-		iio_read_channel_processed(batt->iio_v, &val->intval);
+		ret = iio_read_channel_processed(batt->iio_v, &val->intval);
+		if (ret)
+			return ret;
+
 		val->intval *= 2000;
-		val->intval += 200000;
+		val->intval += 50000;
+
 		/* plus adjust for shunt resistor drop */
-		iio_read_channel_processed(batt->iio_i, &val2);
+		ret = iio_read_channel_processed(batt->iio_i, &val2);
+		if (ret)
+			return ret;
+
 		val2 *= 1000;
 		val2 /= 15;
 		val->intval += val2;
@@ -64,7 +71,10 @@ static int lego_ev3_battery_get_property(struct power_supply *psy,
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
 		/* battery current is iio channel / 15 / 0.05 ohms */
-		iio_read_channel_processed(batt->iio_i, &val->intval);
+		ret = iio_read_channel_processed(batt->iio_i, &val->intval);
+		if (ret)
+			return ret;
+
 		val->intval *= 20000;
 		val->intval /= 15;
 		break;

drivers/power/supply/max1721x_battery.c

@@ -372,7 +372,7 @@ static int devm_w1_max1721x_add_device(struct w1_slave *sl)
 	}
 
 	if (!info->rsense) {
-		dev_warn(info->w1_dev, "RSenese not calibrated, set 10 mOhms!\n");
+		dev_warn(info->w1_dev, "RSense not calibrated, set 10 mOhms!\n");
 		info->rsense = 1000; /* in regs in 10^-5 */
 	}
 	dev_info(info->w1_dev, "RSense: %d mOhms.\n", info->rsense / 100);

drivers/power/supply/max77693_charger.c

@@ -567,6 +567,7 @@ static int max77693_set_charge_input_threshold_volt(struct max77693_charger *chg
 	case 4800000:
 	case 4900000:
 		data = (uvolt - 4700000) / 100000;
+		break;
 	default:
 		dev_err(chg->dev, "Wrong value for charge input voltage regulation threshold\n");
 		return -EINVAL;

drivers/power/supply/power_supply_core.c

@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/notifier.h>
 #include <linux/err.h>
@@ -140,8 +141,13 @@ static void power_supply_deferred_register_work(struct work_struct *work)
 	struct power_supply *psy = container_of(work, struct power_supply,
 						deferred_register_work.work);
 
-	if (psy->dev.parent)
-		mutex_lock(&psy->dev.parent->mutex);
+	if (psy->dev.parent) {
+		while (!mutex_trylock(&psy->dev.parent->mutex)) {
+			if (psy->removing)
+				return;
+			msleep(10);
+		}
+	}
 
 	power_supply_changed(psy);
 
@@ -1082,6 +1088,7 @@ EXPORT_SYMBOL_GPL(devm_power_supply_register_no_ws);
 void power_supply_unregister(struct power_supply *psy)
 {
 	WARN_ON(atomic_dec_return(&psy->use_cnt));
+	psy->removing = true;
 	cancel_work_sync(&psy->changed_work);
 	cancel_delayed_work_sync(&psy->deferred_register_work);
 	sysfs_remove_link(&psy->dev.kobj, "powers");

drivers/power/supply/sbs-battery.c

@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/power/sbs-battery.h>
 #include <linux/power_supply.h>
 #include <linux/slab.h>
@@ -156,6 +157,9 @@ static enum power_supply_property sbs_properties[] = {
 	POWER_SUPPLY_PROP_MODEL_NAME
 };
 
+/* Supports special manufacturer commands from TI BQ20Z75 IC. */
+#define SBS_FLAGS_TI_BQ20Z75		BIT(0)
+
 struct sbs_info {
 	struct i2c_client		*client;
 	struct power_supply		*power_supply;
@@ -168,6 +172,7 @@ struct sbs_info {
 	u32				poll_retry_count;
 	struct delayed_work		work;
 	struct mutex			mode_lock;
+	u32				flags;
 };
 
 static char model_name[I2C_SMBUS_BLOCK_MAX + 1];
@@ -315,17 +320,41 @@ static int sbs_status_correct(struct i2c_client *client, int *intval)
 static int sbs_get_battery_presence_and_health(
 	struct i2c_client *client, enum power_supply_property psp,
 	union power_supply_propval *val)
+{
+	int ret;
+
+	if (psp == POWER_SUPPLY_PROP_PRESENT) {
+		/* Dummy command; if it succeeds, battery is present. */
+		ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
+		if (ret < 0)
+			val->intval = 0; /* battery disconnected */
+		else
+			val->intval = 1; /* battery present */
+	} else { /* POWER_SUPPLY_PROP_HEALTH */
+		/* SBS spec doesn't have a general health command. */
+		val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+	}
+
+	return 0;
+}
+
+static int sbs_get_ti_battery_presence_and_health(
+	struct i2c_client *client, enum power_supply_property psp,
+	union power_supply_propval *val)
 {
 	s32 ret;
 
 	/*
 	 * Write to ManufacturerAccess with ManufacturerAccess command
-	 * and then read the status. Do not check for error on the write
-	 * since not all batteries implement write access to this command,
-	 * while others mandate it.
+	 * and then read the status.
 	 */
-	sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
-			    MANUFACTURER_ACCESS_STATUS);
+	ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
+				  MANUFACTURER_ACCESS_STATUS);
+	if (ret < 0) {
+		if (psp == POWER_SUPPLY_PROP_PRESENT)
+			val->intval = 0; /* battery removed */
+		return ret;
+	}
 
 	ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr);
 	if (ret < 0) {
@@ -600,7 +629,12 @@ static int sbs_get_property(struct power_supply *psy,
 	switch (psp) {
 	case POWER_SUPPLY_PROP_PRESENT:
 	case POWER_SUPPLY_PROP_HEALTH:
-		ret = sbs_get_battery_presence_and_health(client, psp, val);
+		if (client->flags & SBS_FLAGS_TI_BQ20Z75)
+			ret = sbs_get_ti_battery_presence_and_health(client,
+								     psp, val);
+		else
+			ret = sbs_get_battery_presence_and_health(client, psp,
+								  val);
 		if (psp == POWER_SUPPLY_PROP_PRESENT)
 			return 0;
 		break;
@@ -806,6 +840,7 @@ static int sbs_probe(struct i2c_client *client,
 	if (!chip)
 		return -ENOMEM;
 
+	chip->flags = (u32)(uintptr_t)of_device_get_match_data(&client->dev);
 	chip->client = client;
 	chip->enable_detection = false;
 	psy_cfg.of_node = client->dev.of_node;
@@ -911,16 +946,19 @@ static int sbs_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct sbs_info *chip = i2c_get_clientdata(client);
+	int ret;
 
 	if (chip->poll_time > 0)
 		cancel_delayed_work_sync(&chip->work);
 
-	/*
-	 * Write to manufacturer access with sleep command.
-	 * Support is manufacturer dependend, so ignore errors.
-	 */
-	sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
-		MANUFACTURER_ACCESS_SLEEP);
+	if (chip->flags & SBS_FLAGS_TI_BQ20Z75) {
+		/* Write to manufacturer access with sleep command. */
+		ret = sbs_write_word_data(client,
+					  sbs_data[REG_MANUFACTURER_DATA].addr,
+					  MANUFACTURER_ACCESS_SLEEP);
+		if (chip->is_present && ret < 0)
+			return ret;
+	}
 
 	return 0;
 }
@@ -941,7 +979,10 @@ MODULE_DEVICE_TABLE(i2c, sbs_id);
 
 static const struct of_device_id sbs_dt_ids[] = {
 	{ .compatible = "sbs,sbs-battery" },
-	{ .compatible = "ti,bq20z75" },
+	{
+		.compatible = "ti,bq20z75",
+		.data = (void *)SBS_FLAGS_TI_BQ20Z75,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sbs_dt_ids);

drivers/power/supply/tps65217_charger.c

-/*
- * Battery charger driver for TI's tps65217
- *
- * Copyright (c) 2015, Collabora Ltd.
-
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
-
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+// SPDX-License-Identifier: GPL-2.0
+// Battery charger driver for TI's tps65217
+//
+// Copyright (C) 2015 Collabora Ltd.
+// Author: Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 /*
  * Battery charger driver for TI's tps65217

drivers/power/supply/wm8350_power.c

@@ -230,7 +230,8 @@ static irqreturn_t wm8350_charger_handler(int irq, void *data)
 	case WM8350_IRQ_EXT_USB_FB:
 	case WM8350_IRQ_EXT_WALL_FB:
 		wm8350_charger_config(wm8350, policy);
-	case WM8350_IRQ_EXT_BAT_FB:   /* Fall through */
+		/* Fall through */
+	case WM8350_IRQ_EXT_BAT_FB:
 		power_supply_changed(power->battery);
 		power_supply_changed(power->usb);
 		power_supply_changed(power->ac);

drivers/w1/slaves/Kconfig

@@ -100,18 +100,6 @@ config W1_SLAVE_DS2438
 	  Say Y here if you want to use a 1-wire
 	  DS2438 Smart Battery Monitor device support
 
-config W1_SLAVE_DS2760
-	tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
-	help
-	  If you enable this you will have the DS2760 battery monitor
-	  chip support.
-
-	  The battery monitor chip is used in many batteries/devices
-	  as the one who is responsible for charging/discharging/monitoring
-	  Li+ batteries.
-
-	  If you are unsure, say N.
-
 config W1_SLAVE_DS2780
 	tristate "Dallas 2780 battery monitor chip"
 	help

drivers/w1/slaves/Makefile

@@ -14,7 +14,6 @@ obj-$(CONFIG_W1_SLAVE_DS2431)	+= w1_ds2431.o
 obj-$(CONFIG_W1_SLAVE_DS2805)	+= w1_ds2805.o
 obj-$(CONFIG_W1_SLAVE_DS2433)	+= w1_ds2433.o
 obj-$(CONFIG_W1_SLAVE_DS2438)	+= w1_ds2438.o
-obj-$(CONFIG_W1_SLAVE_DS2760)	+= w1_ds2760.o
 obj-$(CONFIG_W1_SLAVE_DS2780)	+= w1_ds2780.o
 obj-$(CONFIG_W1_SLAVE_DS2781)	+= w1_ds2781.o
 obj-$(CONFIG_W1_SLAVE_DS28E04)	+= w1_ds28e04.o

drivers/w1/slaves/w1_ds2760.c

-/*
- * 1-Wire implementation for the ds2760 chip
- *
- * Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/idr.h>
-#include <linux/gfp.h>
-
-#include <linux/w1.h>
-
-#include "w1_ds2760.h"
-
-#define W1_FAMILY_DS2760	0x30
-
-static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
-			int io)
-{
-	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
-
-	if (!dev)
-		return 0;
-
-	mutex_lock(&sl->master->bus_mutex);
-
-	if (addr > DS2760_DATA_SIZE || addr < 0) {
-		count = 0;
-		goto out;
-	}
-	if (addr + count > DS2760_DATA_SIZE)
-		count = DS2760_DATA_SIZE - addr;
-
-	if (!w1_reset_select_slave(sl)) {
-		if (!io) {
-			w1_write_8(sl->master, W1_DS2760_READ_DATA);
-			w1_write_8(sl->master, addr);
-			count = w1_read_block(sl->master, buf, count);
-		} else {
-			w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
-			w1_write_8(sl->master, addr);
-			w1_write_block(sl->master, buf, count);
-			/* XXX w1_write_block returns void, not n_written */
-		}
-	}
-
-out:
-	mutex_unlock(&sl->master->bus_mutex);
-
-	return count;
-}
-
-int w1_ds2760_read(struct device *dev, char *buf, int addr, size_t count)
-{
-	return w1_ds2760_io(dev, buf, addr, count, 0);
-}
-EXPORT_SYMBOL(w1_ds2760_read);
-
-int w1_ds2760_write(struct device *dev, char *buf, int addr, size_t count)
-{
-	return w1_ds2760_io(dev, buf, addr, count, 1);
-}
-EXPORT_SYMBOL(w1_ds2760_write);
-
-static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
-{
-	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
-
-	if (!dev)
-		return -EINVAL;
-
-	mutex_lock(&sl->master->bus_mutex);
-
-	if (w1_reset_select_slave(sl) == 0) {
-		w1_write_8(sl->master, cmd);
-		w1_write_8(sl->master, addr);
-	}
-
-	mutex_unlock(&sl->master->bus_mutex);
-	return 0;
-}
-
-int w1_ds2760_store_eeprom(struct device *dev, int addr)
-{
-	return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_COPY_DATA);
-}
-EXPORT_SYMBOL(w1_ds2760_store_eeprom);
-
-int w1_ds2760_recall_eeprom(struct device *dev, int addr)
-{
-	return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_RECALL_DATA);
-}
-EXPORT_SYMBOL(w1_ds2760_recall_eeprom);
-
-static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
-			     struct bin_attribute *bin_attr, char *buf,
-			     loff_t off, size_t count)
-{
-	struct device *dev = container_of(kobj, struct device, kobj);
-	return w1_ds2760_read(dev, buf, off, count);
-}
-
-static BIN_ATTR_RO(w1_slave, DS2760_DATA_SIZE);
-
-static struct bin_attribute *w1_ds2760_bin_attrs[] = {
-	&bin_attr_w1_slave,
-	NULL,
-};
-
-static const struct attribute_group w1_ds2760_group = {
-	.bin_attrs = w1_ds2760_bin_attrs,
-};
-
-static const struct attribute_group *w1_ds2760_groups[] = {
-	&w1_ds2760_group,
-	NULL,
-};
-
-static int w1_ds2760_add_slave(struct w1_slave *sl)
-{
-	int ret;
-	struct platform_device *pdev;
-
-	pdev = platform_device_alloc("ds2760-battery", PLATFORM_DEVID_AUTO);
-	if (!pdev)
-		return -ENOMEM;
-	pdev->dev.parent = &sl->dev;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto pdev_add_failed;
-
-	dev_set_drvdata(&sl->dev, pdev);
-
-	return 0;
-
-pdev_add_failed:
-	platform_device_put(pdev);
-
-	return ret;
-}
-
-static void w1_ds2760_remove_slave(struct w1_slave *sl)
-{
-	struct platform_device *pdev = dev_get_drvdata(&sl->dev);
-
-	platform_device_unregister(pdev);
-}
-
-static struct w1_family_ops w1_ds2760_fops = {
-	.add_slave    = w1_ds2760_add_slave,
-	.remove_slave = w1_ds2760_remove_slave,
-	.groups       = w1_ds2760_groups,
-};
-
-static struct w1_family w1_ds2760_family = {
-	.fid = W1_FAMILY_DS2760,
-	.fops = &w1_ds2760_fops,
-};
-module_w1_family(w1_ds2760_family);
-
-MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>");
-MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760));

drivers/w1/slaves/w1_ds2760.h

-/*
- * 1-Wire implementation for the ds2760 chip
- *
- * Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- */
-
-#ifndef __w1_ds2760_h__
-#define __w1_ds2760_h__
-
-/* Known commands to the DS2760 chip */
-#define W1_DS2760_SWAP			0xAA
-#define W1_DS2760_READ_DATA		0x69
-#define W1_DS2760_WRITE_DATA		0x6C
-#define W1_DS2760_COPY_DATA		0x48
-#define W1_DS2760_RECALL_DATA		0xB8
-#define W1_DS2760_LOCK			0x6A
-
-/* Number of valid register addresses */
-#define DS2760_DATA_SIZE		0x40
-
-#define DS2760_PROTECTION_REG		0x00
-
-#define DS2760_STATUS_REG		0x01
-#define DS2760_STATUS_IE		(1 << 2)
-#define DS2760_STATUS_SWEN		(1 << 3)
-#define DS2760_STATUS_RNAOP		(1 << 4)
-#define DS2760_STATUS_PMOD		(1 << 5)
-
-#define DS2760_EEPROM_REG		0x07
-#define DS2760_SPECIAL_FEATURE_REG	0x08
-#define DS2760_VOLTAGE_MSB		0x0c
-#define DS2760_VOLTAGE_LSB		0x0d
-#define DS2760_CURRENT_MSB		0x0e
-#define DS2760_CURRENT_LSB		0x0f
-#define DS2760_CURRENT_ACCUM_MSB	0x10
-#define DS2760_CURRENT_ACCUM_LSB	0x11
-#define DS2760_TEMP_MSB			0x18
-#define DS2760_TEMP_LSB			0x19
-#define DS2760_EEPROM_BLOCK0		0x20
-#define DS2760_ACTIVE_FULL		0x20
-#define DS2760_EEPROM_BLOCK1		0x30
-#define DS2760_STATUS_WRITE_REG		0x31
-#define DS2760_RATED_CAPACITY		0x32
-#define DS2760_CURRENT_OFFSET_BIAS	0x33
-#define DS2760_ACTIVE_EMPTY		0x3b
-
-extern int w1_ds2760_read(struct device *dev, char *buf, int addr,
-			  size_t count);
-extern int w1_ds2760_write(struct device *dev, char *buf, int addr,
-			   size_t count);
-extern int w1_ds2760_store_eeprom(struct device *dev, int addr);
-extern int w1_ds2760_recall_eeprom(struct device *dev, int addr);
-
-#endif /* !__w1_ds2760_h__ */

drivers/w1/w1.c

@@ -26,6 +26,7 @@
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 #include <linux/hwmon.h>
+#include <linux/of.h>
 
 #include <linux/atomic.h>
 
@@ -686,6 +687,8 @@ static int __w1_attach_slave_device(struct w1_slave *sl)
 	sl->dev.bus = &w1_bus_type;
 	sl->dev.release = &w1_slave_release;
 	sl->dev.groups = w1_slave_groups;
+	sl->dev.of_node = of_find_matching_node(sl->master->dev.of_node,
+						sl->family->of_match_table);
 
 	dev_set_name(&sl->dev, "%02x-%012llx",
 		 (unsigned int) sl->reg_num.family,

include/linux/power_supply.h

@@ -269,6 +269,7 @@ struct power_supply {
 	spinlock_t changed_lock;
 	bool changed;
 	bool initialized;
+	bool removing;
 	atomic_t use_cnt;
 #ifdef CONFIG_THERMAL
 	struct thermal_zone_device *tzd;

include/linux/w1.h

@@ -274,6 +274,8 @@ struct w1_family {
 
 	struct w1_family_ops	*fops;
 
+	const struct of_device_id *of_match_table;
+
 	atomic_t		refcnt;
 };