Merge tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:

 - Improve support for TI bq20z75 in sbs-battery

 - Add Qualcomm PM8xxx reboot driver

 - Add cros-ec USBPD charger driver

 - Move ds2760 battery driver from w1 to power-supply and add DT support

 - Misc fixes

* tag 'for-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
  power: supply: bq27xxx: Update comments
  power: supply: max77693_charger: fix unintentional fall-through
  power: supply: mark expected switch fall-throughs
  power: supply: lego_ev3_battery: fix Vce offset
  power: supply: lego_ev3_battery: Don't ignore iio_read_channel_processed() return value
  power: supply: ds2760_battery: add devicetree probing
  power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion
  w1: core: match sub-nodes of bus masters in devicetree
  dt-bindings: w1: document bindings for ds2760 battery monitor
  dt-bindings: w1: document generic onewire bindings
  power: supply: adp5061: Fix a couple off by ones
  dt-bindings: power: reset: qcom: Add resin binding
  adp5061: New driver for ADP5061 I2C battery charger
  power: generic-adc-battery: check for duplicate properties copied from iio channels
  power: generic-adc-battery: fix out-of-bounds write when copying channel properties
  power: supply: axp288_charger: Fix initial constant_charge_current value
  power: supply: ab8500: stop using getnstimeofday64()
  power: gemini-poweroff: Avoid more spurious poweroffs
  power: vexpress: fix corruption in notifier registration
  power: remove possible deadlock when unregistering power_supply
  ...

Documentation/devicetree/bindings/power/reset/qcom,pon.txt

+Qualcomm PON Device
+
+The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+and resin along with the Android reboot-mode.
+
+This DT node has pwrkey and resin as sub nodes.
+
+Required Properties:
+-compatible: "qcom,pm8916-pon"
+-reg: Specifies the physical address of the pon register
+
+Optional subnode:
+-pwrkey: Specifies the subnode pwrkey and should follow the
+ qcom,pm8941-pwrkey.txt description.
+-resin: Specifies the subnode resin and should follow the
+ qcom,pm8xxx-pwrkey.txt description.
+
+The rest of the properties should follow the generic reboot-mode description
+found in reboot-mode.txt
+
+Example:
+
+	pon@800 {
+		compatible = "qcom,pm8916-pon";
+
+		reg = <0x800>;
+		mode-bootloader = <0x2>;
+		mode-recovery = <0x1>;
+
+		pwrkey {
+			compatible = "qcom,pm8941-pwrkey";
+			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+			linux,code = <KEY_POWER>;
+		};
+
+		resin {
+			compatible = "qcom,pm8941-resin";
+			interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+			debounce = <15625>;
+			bias-pull-up;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};

Documentation/devicetree/bindings/power/supply/maxim,ds2760.txt

+Devicetree bindings for Maxim DS2760
+====================================
+
+The ds2760 is a w1 slave device and must hence have its sub-node in DT
+under a w1 bus master node.
+
+The device exposes a power supply, so the details described in
+Documentation/devicetree/bindings/power/supply/power_supply.txt apply.
+
+Required properties:
+- compatible: must be "maxim,ds2760"
+
+Optional properties:
+- power-supplies:	Refers to one or more power supplies connected to
+			this battery.
+- maxim,pmod-enabled:	This boolean property enables the DS2760 to enter
+			sleep mode when the DQ line goes low for greater
+			than 2 seconds and leave sleep Mode when the DQ
+			line goes high.
+- maxim,cache-time-ms:	Time im milliseconds to cache the data for. When
+			this time expires, the values are read again from
+			the hardware. Defaults to 1000.
+- rated-capacity-microamp-hours:
+			The rated capacity of the battery, in mAh.
+			If not specified, the value stored in the
+			non-volatile chip memory is used.

Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt

@@ -2,7 +2,11 @@ SBS sbs-battery
 ~~~~~~~~~~
 
 Required properties :
- - compatible : "sbs,sbs-battery"
+ - compatible: "<vendor>,<part-number>", "sbs,sbs-battery" as fallback. The
+     part number compatible string might be used in order to take care of
+     vendor specific registers.
+     Known <vendor>,<part-number>:
+       ti,bq20z75
 
 Optional properties :
  - sbs,i2c-retry-count : The number of times to retry i2c transactions on i2c
@@ -14,9 +18,9 @@ Optional properties :
 
 Example:
 
-	bq20z75@b {
-		compatible = "sbs,sbs-battery";
-		reg = < 0xb >;
+	battery@b {
+		compatible = "ti,bq20z75", "sbs,sbs-battery";
+		reg = <0xb>;
 		sbs,i2c-retry-count = <2>;
 		sbs,poll-retry-count = <10>;
 		sbs,battery-detect-gpios = <&gpio-controller 122 1>;

Documentation/devicetree/bindings/w1/w1-gpio.txt

@@ -13,10 +13,15 @@ Optional properties:
  - linux,open-drain: if specified, the data pin is considered in
 		     open-drain mode.
 
+Also refer to the generic w1.txt document.
+
 Examples:
 
 	onewire {
 		compatible = "w1-gpio";
-		gpios = <&gpio 126 0>, <&gpio 105 0>;
-	};
+		gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
 
+		battery {
+			// ...
+		};
+	};

Documentation/devicetree/bindings/w1/w1.txt

+Generic devicetree bindings for onewire (w1) busses
+===================================================
+
+Onewire busses are described through nodes of their master bus controller.
+Slave devices are listed as sub-nodes of such master devices. For now, only
+one slave is allowed per bus master.
+
+
+Example:
+
+	charger: charger {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+	};
+
+	onewire {
+		compatible = "w1-gpio";
+		gpios = <&gpio 100 0>, <&gpio 101 0>;
+
+		battery {
+			compatible = "maxim,ds2760";
+			power-supplies = <&charger>;
+		};
+	};

MAINTAINERS

@@ -842,6 +842,13 @@ S:	Supported
 F:	drivers/mux/adgs1408.c
 F:	Documentation/devicetree/bindings/mux/adgs1408.txt
 
+ANALOG DEVICES INC ADP5061 DRIVER
+M:	Stefan Popa <stefan.popa@analog.com>
+L:	linux-pm@vger.kernel.org
+W:	http://ez.analog.com/community/linux-device-drivers
+S:	Supported
+F:	drivers/power/supply/adp5061.c
+
 ANALOG DEVICES INC ADV7180 DRIVER
 M:	Lars-Peter Clausen <lars@metafoo.de>
 L:	linux-media@vger.kernel.org

drivers/power/reset/Kconfig

@@ -104,6 +104,17 @@ config POWER_RESET_MSM
 	help
 	  Power off and restart support for Qualcomm boards.
 
+config POWER_RESET_QCOM_PON
+	tristate "Qualcomm power-on driver"
+	depends on ARCH_QCOM
+	depends on MFD_SPMI_PMIC
+	select REBOOT_MODE
+	help
+	  Power On support for Qualcomm boards.
+	  If you have a Qualcomm platform and need support for
+	  power-on and reboot reason, Say Y.
+	  If unsure, Say N.
+
 config POWER_RESET_OCELOT_RESET
 	bool "Microsemi Ocelot reset driver"
 	depends on MSCC_OCELOT || COMPILE_TEST

drivers/power/reset/Makefile

@@ -11,6 +11,7 @@ obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
 obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
 obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
 obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
+obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
 obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
 obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
 obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o

drivers/power/reset/gemini-poweroff.c

@@ -130,7 +130,17 @@ static int gemini_poweroff_probe(struct platform_device *pdev)
 	val |= GEMINI_CTRL_ENABLE;
 	writel(val, gpw->base + GEMINI_PWC_CTRLREG);
 
-	/* Now that the state machine is active, clear the IRQ */
+	/* Clear the IRQ */
+	val = readl(gpw->base + GEMINI_PWC_CTRLREG);
+	val |= GEMINI_CTRL_IRQ_CLR;
+	writel(val, gpw->base + GEMINI_PWC_CTRLREG);
+
+	/* Wait for this to clear */
+	val = readl(gpw->base + GEMINI_PWC_STATREG);
+	while (val & 0x70U)
+		val = readl(gpw->base + GEMINI_PWC_STATREG);
+
+	/* Clear the IRQ again */
 	val = readl(gpw->base + GEMINI_PWC_CTRLREG);
 	val |= GEMINI_CTRL_IRQ_CLR;
 	writel(val, gpw->base + GEMINI_PWC_CTRLREG);

drivers/power/reset/qcom-pon.c

+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017-18 Linaro Limited
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/reboot-mode.h>
+#include <linux/regmap.h>
+
+#define PON_SOFT_RB_SPARE		0x8f
+
+struct pm8916_pon {
+	struct device *dev;
+	struct regmap *regmap;
+	u32 baseaddr;
+	struct reboot_mode_driver reboot_mode;
+};
+
+static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
+				    unsigned int magic)
+{
+	struct pm8916_pon *pon = container_of
+			(reboot, struct pm8916_pon, reboot_mode);
+	int ret;
+
+	ret = regmap_update_bits(pon->regmap,
+				 pon->baseaddr + PON_SOFT_RB_SPARE,
+				 0xfc, magic << 2);
+	if (ret < 0)
+		dev_err(pon->dev, "update reboot mode bits failed\n");
+
+	return ret;
+}
+
+static int pm8916_pon_probe(struct platform_device *pdev)
+{
+	struct pm8916_pon *pon;
+	int error;
+
+	pon = devm_kzalloc(&pdev->dev, sizeof(*pon), GFP_KERNEL);
+	if (!pon)
+		return -ENOMEM;
+
+	pon->dev = &pdev->dev;
+
+	pon->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!pon->regmap) {
+		dev_err(&pdev->dev, "failed to locate regmap\n");
+		return -ENODEV;
+	}
+
+	error = of_property_read_u32(pdev->dev.of_node, "reg",
+				     &pon->baseaddr);
+	if (error)
+		return error;
+
+	pon->reboot_mode.dev = &pdev->dev;
+	pon->reboot_mode.write = pm8916_reboot_mode_write;
+	error = devm_reboot_mode_register(&pdev->dev, &pon->reboot_mode);
+	if (error) {
+		dev_err(&pdev->dev, "can't register reboot mode\n");
+		return error;
+	}
+
+	platform_set_drvdata(pdev, pon);
+
+	return devm_of_platform_populate(&pdev->dev);
+}
+
+static const struct of_device_id pm8916_pon_id_table[] = {
+	{ .compatible = "qcom,pm8916-pon" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pm8916_pon_id_table);
+
+static struct platform_driver pm8916_pon_driver = {
+	.probe = pm8916_pon_probe,
+	.driver = {
+		.name = "pm8916-pon",
+		.of_match_table = of_match_ptr(pm8916_pon_id_table),
+	},
+};
+module_platform_driver(pm8916_pon_driver);
+
+MODULE_DESCRIPTION("pm8916 Power On driver");
+MODULE_LICENSE("GPL v2");

drivers/power/reset/vexpress-poweroff.c

@@ -35,6 +35,7 @@ static void vexpress_reset_do(struct device *dev, const char *what)
 }
 
 static struct device *vexpress_power_off_device;
+static atomic_t vexpress_restart_nb_refcnt = ATOMIC_INIT(0);
 
 static void vexpress_power_off(void)
 {
@@ -99,11 +100,14 @@ static int _vexpress_register_restart_handler(struct device *dev)
 	int err;
 
 	vexpress_restart_device = dev;
+	if (atomic_inc_return(&vexpress_restart_nb_refcnt) == 1) {
 		err = register_restart_handler(&vexpress_restart_nb);
 		if (err) {
 			dev_err(dev, "cannot register restart handler (err=%d)\n", err);
+			atomic_dec(&vexpress_restart_nb_refcnt);
 			return err;
 		}
+	}
 	device_create_file(dev, &dev_attr_active);
 
 	return 0;

drivers/power/reset/zx-reboot.c

@@ -51,6 +51,7 @@ static int zx_reboot_probe(struct platform_device *pdev)
 
 	np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu");
 	pcu_base = of_iomap(np, 0);
+	of_node_put(np);
 	if (!pcu_base) {
 		iounmap(base);
 		WARN(1, "failed to map pcu_base address");

drivers/power/supply/Kconfig

@@ -75,6 +75,17 @@ config BATTERY_88PM860X
 	help
 	  Say Y here to enable battery monitor for Marvell 88PM860x chip.
 
+config CHARGER_ADP5061
+	tristate "ADP5061 battery charger driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say Y here to enable support for the ADP5061 standalone battery
+	  charger.
+
+	  This driver can be built as a module. If so, the module will be
+	  called adp5061.
+
 config BATTERY_ACT8945A
 	tristate "Active-semi ACT8945A charger driver"
 	depends on MFD_ACT8945A || COMPILE_TEST
@@ -92,7 +103,7 @@ config BATTERY_CPCAP
 
 config BATTERY_DS2760
 	tristate "DS2760 battery driver (HP iPAQ & others)"
-	depends on W1 && W1_SLAVE_DS2760
+	depends on W1
 	help
 	  Say Y here to enable support for batteries with ds2760 chip.
 
@@ -624,4 +635,14 @@ config CHARGER_RT9455
 	help
 	  Say Y to enable support for Richtek RT9455 battery charger.
 
+config CHARGER_CROS_USBPD
+	tristate "ChromeOS EC based USBPD charger"
+	depends on MFD_CROS_EC
+	default n
+	help
+	  Say Y here to enable ChromeOS EC based USBPD charger
+	  driver. This driver gets various bits of information about
+	  what is connected to USB PD ports from the EC and converts
+	  that into power_supply properties.
+
 endif # POWER_SUPPLY

drivers/power/supply/Makefile

@@ -18,6 +18,7 @@ obj-$(CONFIG_WM8350_POWER)	+= wm8350_power.o
 obj-$(CONFIG_TEST_POWER)	+= test_power.o
 
 obj-$(CONFIG_BATTERY_88PM860X)	+= 88pm860x_battery.o
+obj-$(CONFIG_CHARGER_ADP5061)	+= adp5061.o
 obj-$(CONFIG_BATTERY_ACT8945A)	+= act8945a_charger.o
 obj-$(CONFIG_BATTERY_AXP20X)	+= axp20x_battery.o
 obj-$(CONFIG_CHARGER_AXP20X)	+= axp20x_ac_power.o
@@ -83,3 +84,4 @@ obj-$(CONFIG_CHARGER_TPS65090)	+= tps65090-charger.o
 obj-$(CONFIG_CHARGER_TPS65217)	+= tps65217_charger.o
 obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
 obj-$(CONFIG_AXP288_CHARGER)	+= axp288_charger.o
+obj-$(CONFIG_CHARGER_CROS_USBPD)	+= cros_usbpd-charger.o

drivers/power/supply/ab8500_fg.c

@@ -379,15 +379,13 @@ static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr)
  */
 static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
 {
-	struct timespec64 ts64;
+	time64_t now = ktime_get_boottime_seconds();
 	struct ab8500_fg_avg_cap *avg = &di->avg_cap;
 
-	getnstimeofday64(&ts64);
-
 	do {
 		avg->sum += sample - avg->samples[avg->pos];
 		avg->samples[avg->pos] = sample;
-		avg->time_stamps[avg->pos] = ts64.tv_sec;
+		avg->time_stamps[avg->pos] = now;
 		avg->pos++;
 
 		if (avg->pos == NBR_AVG_SAMPLES)
@@ -400,7 +398,7 @@ static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
 		 * Check the time stamp for each sample. If too old,
 		 * replace with latest sample
 		 */
-	} while (ts64.tv_sec - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
+	} while (now - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
 
 	avg->avg = avg->sum / avg->nbr_samples;
 
@@ -439,14 +437,14 @@ static void ab8500_fg_clear_cap_samples(struct ab8500_fg *di)
 static void ab8500_fg_fill_cap_sample(struct ab8500_fg *di, int sample)
 {
 	int i;
-	struct timespec64 ts64;
+	time64_t now;
 	struct ab8500_fg_avg_cap *avg = &di->avg_cap;
 
-	getnstimeofday64(&ts64);
+	now = ktime_get_boottime_seconds();
 
 	for (i = 0; i < NBR_AVG_SAMPLES; i++) {
 		avg->samples[i] = sample;
-		avg->time_stamps[i] = ts64.tv_sec;
+		avg->time_stamps[i] = now;
 	}
 
 	avg->pos = 0;

drivers/power/supply/axp20x_usb_power.c

@@ -222,6 +222,7 @@ static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power,
 	case 100000:
 		if (power->axp20x_id == AXP221_ID)
 			return -EINVAL;
+		/* fall through */
 	case 500000:
 	case 900000:
 		val = (900000 - intval) / 400000;

drivers/power/supply/axp288_charger.c

@@ -718,7 +718,7 @@ static int charger_init_hw_regs(struct axp288_chrg_info *info)
 	}
 
 	/* Determine charge current limit */
-	cc = (ret & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
+	cc = (val & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
 	cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
 	info->cc = cc;
 

drivers/power/supply/bq27xxx_battery.c

@@ -26,7 +26,6 @@
  * http://www.ti.com/product/bq27510-g1
  * http://www.ti.com/product/bq27510-g2
  * http://www.ti.com/product/bq27510-g3
- * http://www.ti.com/product/bq27520-g4
  * http://www.ti.com/product/bq27520-g1
  * http://www.ti.com/product/bq27520-g2
  * http://www.ti.com/product/bq27520-g3
@@ -40,7 +39,9 @@
  * http://www.ti.com/product/bq27545-g1
  * http://www.ti.com/product/bq27421-g1
  * http://www.ti.com/product/bq27425-g1
+ * http://www.ti.com/product/bq27426
  * http://www.ti.com/product/bq27411-g1
+ * http://www.ti.com/product/bq27441-g1
  * http://www.ti.com/product/bq27621-g1
  */
 

drivers/power/supply/generic-adc-battery.c

@@ -241,10 +241,10 @@ static int gab_probe(struct platform_device *pdev)
 	struct power_supply_desc *psy_desc;
 	struct power_supply_config psy_cfg = {};
 	struct gab_platform_data *pdata = pdev->dev.platform_data;
-	enum power_supply_property *properties;
 	int ret = 0;
 	int chan;
-	int index = 0;
+	int index = ARRAY_SIZE(gab_props);
+	bool any = false;
 
 	adc_bat = devm_kzalloc(&pdev->dev, sizeof(*adc_bat), GFP_KERNEL);
 	if (!adc_bat) {
@@ -278,8 +278,6 @@ static int gab_probe(struct platform_device *pdev)
 	}
 
 	memcpy(psy_desc->properties, gab_props, sizeof(gab_props));
-	properties = (enum power_supply_property *)
-			((char *)psy_desc->properties + sizeof(gab_props));
 
 	/*
 	 * getting channel from iio and copying the battery properties
@@ -293,15 +291,22 @@ static int gab_probe(struct platform_device *pdev)
 			adc_bat->channel[chan] = NULL;
 		} else {
 			/* copying properties for supported channels only */
-			memcpy(properties + sizeof(*(psy_desc->properties)) * index,
-					&gab_dyn_props[chan],
-					sizeof(gab_dyn_props[chan]));
-			index++;
+			int index2;
+
+			for (index2 = 0; index2 < index; index2++) {
+				if (psy_desc->properties[index2] ==
+				    gab_dyn_props[chan])
+					break;	/* already known */
+			}
+			if (index2 == index)	/* really new */
+				psy_desc->properties[index++] =
+					gab_dyn_props[chan];
+			any = true;
 		}
 	}
 
 	/* none of the channels are supported so let's bail out */
-	if (index == 0) {
+	if (!any) {
 		ret = -ENODEV;
 		goto second_mem_fail;
 	}
@@ -312,7 +317,7 @@ static int gab_probe(struct platform_device *pdev)
 	 * as come channels may be not be supported by the device.So
 	 * we need to take care of that.
 	 */
-	psy_desc->num_properties = ARRAY_SIZE(gab_props) + index;
+	psy_desc->num_properties = index;
 
 	adc_bat->psy = power_supply_register(&pdev->dev, psy_desc, &psy_cfg);
 	if (IS_ERR(adc_bat->psy)) {

drivers/power/supply/lego_ev3_battery.c

@@ -39,7 +39,7 @@ static int lego_ev3_battery_get_property(struct power_supply *psy,
 					 union power_supply_propval *val)
 {
 	struct lego_ev3_battery *batt = power_supply_get_drvdata(psy);
-	int val2;
+	int ret, val2;
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_TECHNOLOGY:
@@ -47,11 +47,18 @@ static int lego_ev3_battery_get_property(struct power_supply *psy,
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
 		/* battery voltage is iio channel * 2 + Vce of transistor */
-		iio_read_channel_processed(batt->iio_v, &val->intval);
+		ret = iio_read_channel_processed(batt->iio_v, &val->intval);
+		if (ret)
+			return ret;
+
 		val->intval *= 2000;
-		val->intval += 200000;
+		val->intval += 50000;
+
 		/* plus adjust for shunt resistor drop */
-		iio_read_channel_processed(batt->iio_i, &val2);
+		ret = iio_read_channel_processed(batt->iio_i, &val2);
+		if (ret)
+			return ret;
+
 		val2 *= 1000;
 		val2 /= 15;
 		val->intval += val2;
@@ -64,7 +71,10 @@ static int lego_ev3_battery_get_property(struct power_supply *psy,
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
 		/* battery current is iio channel / 15 / 0.05 ohms */
-		iio_read_channel_processed(batt->iio_i, &val->intval);
+		ret = iio_read_channel_processed(batt->iio_i, &val->intval);
+		if (ret)
+			return ret;
+
 		val->intval *= 20000;
 		val->intval /= 15;
 		break;

drivers/power/supply/max1721x_battery.c

@@ -372,7 +372,7 @@ static int devm_w1_max1721x_add_device(struct w1_slave *sl)
 	}
 
 	if (!info->rsense) {
-		dev_warn(info->w1_dev, "RSenese not calibrated, set 10 mOhms!\n");
+		dev_warn(info->w1_dev, "RSense not calibrated, set 10 mOhms!\n");
 		info->rsense = 1000; /* in regs in 10^-5 */
 	}
 	dev_info(info->w1_dev, "RSense: %d mOhms.\n", info->rsense / 100);

drivers/power/supply/max77693_charger.c

@@ -567,6 +567,7 @@ static int max77693_set_charge_input_threshold_volt(struct max77693_charger *chg
 	case 4800000:
 	case 4900000:
 		data = (uvolt - 4700000) / 100000;
+		break;
 	default:
 		dev_err(chg->dev, "Wrong value for charge input voltage regulation threshold\n");
 		return -EINVAL;

drivers/power/supply/power_supply_core.c

@@ -14,6 +14,7 @@
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/slab.h>
+#include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/notifier.h>
 #include <linux/err.h>
@@ -140,8 +141,13 @@ static void power_supply_deferred_register_work(struct work_struct *work)
 	struct power_supply *psy = container_of(work, struct power_supply,
 						deferred_register_work.work);
 
-	if (psy->dev.parent)
-		mutex_lock(&psy->dev.parent->mutex);
+	if (psy->dev.parent) {
+		while (!mutex_trylock(&psy->dev.parent->mutex)) {
+			if (psy->removing)
+				return;
+			msleep(10);
+		}
+	}
 
 	power_supply_changed(psy);
 
@@ -1082,6 +1088,7 @@ EXPORT_SYMBOL_GPL(devm_power_supply_register_no_ws);
 void power_supply_unregister(struct power_supply *psy)
 {
 	WARN_ON(atomic_dec_return(&psy->use_cnt));
+	psy->removing = true;
 	cancel_work_sync(&psy->changed_work);
 	cancel_delayed_work_sync(&psy->deferred_register_work);
 	sysfs_remove_link(&psy->dev.kobj, "powers");

drivers/power/supply/sbs-battery.c

@@ -23,6 +23,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/power/sbs-battery.h>
 #include <linux/power_supply.h>
 #include <linux/slab.h>
@@ -156,6 +157,9 @@ static enum power_supply_property sbs_properties[] = {
 	POWER_SUPPLY_PROP_MODEL_NAME
 };
 
+/* Supports special manufacturer commands from TI BQ20Z75 IC. */
+#define SBS_FLAGS_TI_BQ20Z75		BIT(0)
+
 struct sbs_info {
 	struct i2c_client		*client;
 	struct power_supply		*power_supply;
@@ -168,6 +172,7 @@ struct sbs_info {
 	u32				poll_retry_count;
 	struct delayed_work		work;
 	struct mutex			mode_lock;
+	u32				flags;
 };
 
 static char model_name[I2C_SMBUS_BLOCK_MAX + 1];
@@ -315,17 +320,41 @@ static int sbs_status_correct(struct i2c_client *client, int *intval)
 static int sbs_get_battery_presence_and_health(
 	struct i2c_client *client, enum power_supply_property psp,
 	union power_supply_propval *val)
+{
+	int ret;
+
+	if (psp == POWER_SUPPLY_PROP_PRESENT) {
+		/* Dummy command; if it succeeds, battery is present. */
+		ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
+		if (ret < 0)
+			val->intval = 0; /* battery disconnected */
+		else
+			val->intval = 1; /* battery present */
+	} else { /* POWER_SUPPLY_PROP_HEALTH */
+		/* SBS spec doesn't have a general health command. */
+		val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+	}
+
+	return 0;
+}
+
+static int sbs_get_ti_battery_presence_and_health(
+	struct i2c_client *client, enum power_supply_property psp,
+	union power_supply_propval *val)
 {
 	s32 ret;
 
 	/*
 	 * Write to ManufacturerAccess with ManufacturerAccess command
-	 * and then read the status. Do not check for error on the write
-	 * since not all batteries implement write access to this command,
-	 * while others mandate it.
+	 * and then read the status.
 	 */
-	sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
+	ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
 				  MANUFACTURER_ACCESS_STATUS);
+	if (ret < 0) {
+		if (psp == POWER_SUPPLY_PROP_PRESENT)
+			val->intval = 0; /* battery removed */
+		return ret;
+	}
 
 	ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr);
 	if (ret < 0) {
@@ -600,7 +629,12 @@ static int sbs_get_property(struct power_supply *psy,
 	switch (psp) {
 	case POWER_SUPPLY_PROP_PRESENT:
 	case POWER_SUPPLY_PROP_HEALTH:
-		ret = sbs_get_battery_presence_and_health(client, psp, val);
+		if (client->flags & SBS_FLAGS_TI_BQ20Z75)
+			ret = sbs_get_ti_battery_presence_and_health(client,
+								     psp, val);
+		else
+			ret = sbs_get_battery_presence_and_health(client, psp,
+								  val);
 		if (psp == POWER_SUPPLY_PROP_PRESENT)
 			return 0;
 		break;
@@ -806,6 +840,7 @@ static int sbs_probe(struct i2c_client *client,
 	if (!chip)
 		return -ENOMEM;
 
+	chip->flags = (u32)(uintptr_t)of_device_get_match_data(&client->dev);
 	chip->client = client;
 	chip->enable_detection = false;
 	psy_cfg.of_node = client->dev.of_node;
@@ -911,16 +946,19 @@ static int sbs_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct sbs_info *chip = i2c_get_clientdata(client);
+	int ret;
 
 	if (chip->poll_time > 0)
 		cancel_delayed_work_sync(&chip->work);
 
-	/*
-	 * Write to manufacturer access with sleep command.
-	 * Support is manufacturer dependend, so ignore errors.
-	 */
-	sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
+	if (chip->flags & SBS_FLAGS_TI_BQ20Z75) {
+		/* Write to manufacturer access with sleep command. */
+		ret = sbs_write_word_data(client,
+					  sbs_data[REG_MANUFACTURER_DATA].addr,
 					  MANUFACTURER_ACCESS_SLEEP);
+		if (chip->is_present && ret < 0)
+			return ret;
+	}
 
 	return 0;
 }
@@ -941,7 +979,10 @@ MODULE_DEVICE_TABLE(i2c, sbs_id);
 
 static const struct of_device_id sbs_dt_ids[] = {
 	{ .compatible = "sbs,sbs-battery" },
-	{ .compatible = "ti,bq20z75" },
+	{
+		.compatible = "ti,bq20z75",
+		.data = (void *)SBS_FLAGS_TI_BQ20Z75,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(of, sbs_dt_ids);

drivers/power/supply/tps65217_charger.c

-/*
- * Battery charger driver for TI's tps65217
- *
- * Copyright (c) 2015, Collabora Ltd.
-
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
-
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
-
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
+// SPDX-License-Identifier: GPL-2.0
+// Battery charger driver for TI's tps65217
+//
+// Copyright (C) 2015 Collabora Ltd.
+// Author: Enric Balletbo i Serra <enric.balletbo@collabora.com>
 
 /*
  * Battery charger driver for TI's tps65217

drivers/power/supply/wm8350_power.c

@@ -230,7 +230,8 @@ static irqreturn_t wm8350_charger_handler(int irq, void *data)
 	case WM8350_IRQ_EXT_USB_FB:
 	case WM8350_IRQ_EXT_WALL_FB:
 		wm8350_charger_config(wm8350, policy);
-	case WM8350_IRQ_EXT_BAT_FB:   /* Fall through */
+		/* Fall through */
+	case WM8350_IRQ_EXT_BAT_FB:
 		power_supply_changed(power->battery);
 		power_supply_changed(power->usb);
 		power_supply_changed(power->ac);

drivers/w1/slaves/Kconfig

@@ -100,18 +100,6 @@ config W1_SLAVE_DS2438
 	  Say Y here if you want to use a 1-wire
 	  DS2438 Smart Battery Monitor device support
 
-config W1_SLAVE_DS2760
-	tristate "Dallas 2760 battery monitor chip (HP iPAQ & others)"
-	help
-	  If you enable this you will have the DS2760 battery monitor
-	  chip support.
-
-	  The battery monitor chip is used in many batteries/devices
-	  as the one who is responsible for charging/discharging/monitoring
-	  Li+ batteries.
-
-	  If you are unsure, say N.
-
 config W1_SLAVE_DS2780
 	tristate "Dallas 2780 battery monitor chip"
 	help

drivers/w1/slaves/Makefile

@@ -14,7 +14,6 @@ obj-$(CONFIG_W1_SLAVE_DS2431)	+= w1_ds2431.o
 obj-$(CONFIG_W1_SLAVE_DS2805)	+= w1_ds2805.o
 obj-$(CONFIG_W1_SLAVE_DS2433)	+= w1_ds2433.o
 obj-$(CONFIG_W1_SLAVE_DS2438)	+= w1_ds2438.o
-obj-$(CONFIG_W1_SLAVE_DS2760)	+= w1_ds2760.o
 obj-$(CONFIG_W1_SLAVE_DS2780)	+= w1_ds2780.o
 obj-$(CONFIG_W1_SLAVE_DS2781)	+= w1_ds2781.o
 obj-$(CONFIG_W1_SLAVE_DS28E04)	+= w1_ds28e04.o

drivers/w1/slaves/w1_ds2760.c

-/*
- * 1-Wire implementation for the ds2760 chip
- *
- * Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/idr.h>
-#include <linux/gfp.h>
-
-#include <linux/w1.h>
-
-#include "w1_ds2760.h"
-
-#define W1_FAMILY_DS2760	0x30
-
-static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
-			int io)
-{
-	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
-
-	if (!dev)
-		return 0;
-
-	mutex_lock(&sl->master->bus_mutex);
-
-	if (addr > DS2760_DATA_SIZE || addr < 0) {
-		count = 0;
-		goto out;
-	}
-	if (addr + count > DS2760_DATA_SIZE)
-		count = DS2760_DATA_SIZE - addr;
-
-	if (!w1_reset_select_slave(sl)) {
-		if (!io) {
-			w1_write_8(sl->master, W1_DS2760_READ_DATA);
-			w1_write_8(sl->master, addr);
-			count = w1_read_block(sl->master, buf, count);
-		} else {
-			w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
-			w1_write_8(sl->master, addr);
-			w1_write_block(sl->master, buf, count);
-			/* XXX w1_write_block returns void, not n_written */
-		}
-	}
-
-out:
-	mutex_unlock(&sl->master->bus_mutex);
-
-	return count;
-}
-
-int w1_ds2760_read(struct device *dev, char *buf, int addr, size_t count)
-{
-	return w1_ds2760_io(dev, buf, addr, count, 0);
-}
-EXPORT_SYMBOL(w1_ds2760_read);
-
-int w1_ds2760_write(struct device *dev, char *buf, int addr, size_t count)
-{
-	return w1_ds2760_io(dev, buf, addr, count, 1);
-}
-EXPORT_SYMBOL(w1_ds2760_write);
-
-static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
-{
-	struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
-
-	if (!dev)
-		return -EINVAL;
-
-	mutex_lock(&sl->master->bus_mutex);
-
-	if (w1_reset_select_slave(sl) == 0) {
-		w1_write_8(sl->master, cmd);
-		w1_write_8(sl->master, addr);
-	}
-
-	mutex_unlock(&sl->master->bus_mutex);
-	return 0;
-}
-
-int w1_ds2760_store_eeprom(struct device *dev, int addr)
-{
-	return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_COPY_DATA);
-}
-EXPORT_SYMBOL(w1_ds2760_store_eeprom);
-
-int w1_ds2760_recall_eeprom(struct device *dev, int addr)
-{
-	return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_RECALL_DATA);
-}
-EXPORT_SYMBOL(w1_ds2760_recall_eeprom);
-
-static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
-			     struct bin_attribute *bin_attr, char *buf,
-			     loff_t off, size_t count)
-{
-	struct device *dev = container_of(kobj, struct device, kobj);
-	return w1_ds2760_read(dev, buf, off, count);
-}
-
-static BIN_ATTR_RO(w1_slave, DS2760_DATA_SIZE);
-
-static struct bin_attribute *w1_ds2760_bin_attrs[] = {
-	&bin_attr_w1_slave,
-	NULL,
-};
-
-static const struct attribute_group w1_ds2760_group = {
-	.bin_attrs = w1_ds2760_bin_attrs,
-};
-
-static const struct attribute_group *w1_ds2760_groups[] = {
-	&w1_ds2760_group,
-	NULL,
-};
-
-static int w1_ds2760_add_slave(struct w1_slave *sl)
-{
-	int ret;
-	struct platform_device *pdev;
-
-	pdev = platform_device_alloc("ds2760-battery", PLATFORM_DEVID_AUTO);
-	if (!pdev)
-		return -ENOMEM;
-	pdev->dev.parent = &sl->dev;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto pdev_add_failed;
-
-	dev_set_drvdata(&sl->dev, pdev);
-
-	return 0;
-
-pdev_add_failed:
-	platform_device_put(pdev);
-
-	return ret;
-}
-
-static void w1_ds2760_remove_slave(struct w1_slave *sl)
-{
-	struct platform_device *pdev = dev_get_drvdata(&sl->dev);
-
-	platform_device_unregister(pdev);
-}
-
-static struct w1_family_ops w1_ds2760_fops = {
-	.add_slave    = w1_ds2760_add_slave,
-	.remove_slave = w1_ds2760_remove_slave,
-	.groups       = w1_ds2760_groups,
-};
-
-static struct w1_family w1_ds2760_family = {
-	.fid = W1_FAMILY_DS2760,
-	.fops = &w1_ds2760_fops,
-};
-module_w1_family(w1_ds2760_family);
-
-MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>");
-MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760));

drivers/w1/slaves/w1_ds2760.h

-/*
- * 1-Wire implementation for the ds2760 chip
- *
- * Copyright © 2004-2005, Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- */
-
-#ifndef __w1_ds2760_h__
-#define __w1_ds2760_h__
-
-/* Known commands to the DS2760 chip */
-#define W1_DS2760_SWAP			0xAA
-#define W1_DS2760_READ_DATA		0x69
-#define W1_DS2760_WRITE_DATA		0x6C
-#define W1_DS2760_COPY_DATA		0x48
-#define W1_DS2760_RECALL_DATA		0xB8
-#define W1_DS2760_LOCK			0x6A
-
-/* Number of valid register addresses */
-#define DS2760_DATA_SIZE		0x40
-
-#define DS2760_PROTECTION_REG		0x00
-
-#define DS2760_STATUS_REG		0x01
-#define DS2760_STATUS_IE		(1 << 2)
-#define DS2760_STATUS_SWEN		(1 << 3)
-#define DS2760_STATUS_RNAOP		(1 << 4)
-#define DS2760_STATUS_PMOD		(1 << 5)
-
-#define DS2760_EEPROM_REG		0x07
-#define DS2760_SPECIAL_FEATURE_REG	0x08
-#define DS2760_VOLTAGE_MSB		0x0c
-#define DS2760_VOLTAGE_LSB		0x0d
-#define DS2760_CURRENT_MSB		0x0e
-#define DS2760_CURRENT_LSB		0x0f
-#define DS2760_CURRENT_ACCUM_MSB	0x10
-#define DS2760_CURRENT_ACCUM_LSB	0x11
-#define DS2760_TEMP_MSB			0x18
-#define DS2760_TEMP_LSB			0x19
-#define DS2760_EEPROM_BLOCK0		0x20
-#define DS2760_ACTIVE_FULL		0x20
-#define DS2760_EEPROM_BLOCK1		0x30
-#define DS2760_STATUS_WRITE_REG		0x31
-#define DS2760_RATED_CAPACITY		0x32
-#define DS2760_CURRENT_OFFSET_BIAS	0x33
-#define DS2760_ACTIVE_EMPTY		0x3b
-
-extern int w1_ds2760_read(struct device *dev, char *buf, int addr,
-			  size_t count);
-extern int w1_ds2760_write(struct device *dev, char *buf, int addr,
-			   size_t count);
-extern int w1_ds2760_store_eeprom(struct device *dev, int addr);
-extern int w1_ds2760_recall_eeprom(struct device *dev, int addr);
-
-#endif /* !__w1_ds2760_h__ */

drivers/w1/w1.c

@@ -26,6 +26,7 @@
 #include <linux/kthread.h>
 #include <linux/freezer.h>
 #include <linux/hwmon.h>
+#include <linux/of.h>
 
 #include <linux/atomic.h>
 
@@ -686,6 +687,8 @@ static int __w1_attach_slave_device(struct w1_slave *sl)
 	sl->dev.bus = &w1_bus_type;
 	sl->dev.release = &w1_slave_release;
 	sl->dev.groups = w1_slave_groups;
+	sl->dev.of_node = of_find_matching_node(sl->master->dev.of_node,
+						sl->family->of_match_table);
 
 	dev_set_name(&sl->dev, "%02x-%012llx",
 		 (unsigned int) sl->reg_num.family,

include/linux/power_supply.h

@@ -269,6 +269,7 @@ struct power_supply {
 	spinlock_t changed_lock;
 	bool changed;
 	bool initialized;
+	bool removing;
 	atomic_t use_cnt;
 #ifdef CONFIG_THERMAL
 	struct thermal_zone_device *tzd;

include/linux/w1.h

@@ -274,6 +274,8 @@ struct w1_family {
 
 	struct w1_family_ops	*fops;
 
+	const struct of_device_id *of_match_table;
+
 	atomic_t		refcnt;
 };