Commit c2c8b03e authored by Eilon Greenstein's avatar Eilon Greenstein Committed by David S. Miller

bnx2x: Pre emphasis configuration

Supporting non-default pre-emphasis settings for the internal and some external
PHYs
Signed-off-by: default avatarYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent ed8680a7
......@@ -178,36 +178,21 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */
u32 rdma_mac_lower;
u32 serdes_config;
/* for external PHY, or forced mode or during AN */
#define PORT_HW_CFG_SERDES_TX_DRV_PRE_EMPHASIS_MASK 0xffff0000
#define PORT_HW_CFG_SERDES_TX_DRV_PRE_EMPHASIS_SHIFT 16
#define PORT_HW_CFG_SERDES_TX_DRV_PRE_EMPHASIS_MASK 0x0000FFFF
#define PORT_HW_CFG_SERDES_TX_DRV_PRE_EMPHASIS_SHIFT 0
#define PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK 0x0000ffff
#define PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT 0
#define PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK 0xFFFF0000
#define PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT 16
u16 serdes_tx_driver_pre_emphasis[16];
u16 serdes_rx_driver_equalizer[16];
u32 xgxs_config_lane0;
u32 xgxs_config_lane1;
u32 xgxs_config_lane2;
u32 xgxs_config_lane3;
/* for external PHY, or forced mode or during AN */
#define PORT_HW_CFG_XGXS_TX_DRV_PRE_EMPHASIS_MASK 0xffff0000
#define PORT_HW_CFG_XGXS_TX_DRV_PRE_EMPHASIS_SHIFT 16
u32 Reserved0[16]; /* 0x158 */
#define PORT_HW_CFG_XGXS_RX_DRV_EQUALIZER_MASK 0x0000ffff
#define PORT_HW_CFG_XGXS_RX_DRV_EQUALIZER_SHIFT 0
/* for external PHY, or forced mode or during AN */
u16 xgxs_config_rx[4]; /* 0x198 */
u16 xgxs_tx_driver_pre_emphasis_lane0[16];
u16 xgxs_tx_driver_pre_emphasis_lane1[16];
u16 xgxs_tx_driver_pre_emphasis_lane2[16];
u16 xgxs_tx_driver_pre_emphasis_lane3[16];
u16 xgxs_config_tx[4]; /* 0x1A0 */
u16 xgxs_rx_driver_equalizer_lane0[16];
u16 xgxs_rx_driver_equalizer_lane1[16];
u16 xgxs_rx_driver_equalizer_lane2[16];
u16 xgxs_rx_driver_equalizer_lane3[16];
u32 Reserved1[64]; /* 0x1A8 */
u32 lane_config;
#define PORT_HW_CFG_LANE_SWAP_CFG_MASK 0x0000ffff
......
......@@ -1758,34 +1758,40 @@ static void bnx2x_set_gmii_tx_driver(struct link_params *params)
struct bnx2x *bp = params->bp;
u16 lp_up2;
u16 tx_driver;
u16 bank;
/* read precomp */
CL45_RD_OVER_CL22(bp, params->port,
params->phy_addr,
MDIO_REG_BANK_OVER_1G,
MDIO_OVER_1G_LP_UP2, &lp_up2);
CL45_RD_OVER_CL22(bp, params->port,
params->phy_addr,
MDIO_REG_BANK_TX0,
MDIO_TX0_TX_DRIVER, &tx_driver);
/* bits [10:7] at lp_up2, positioned at [15:12] */
lp_up2 = (((lp_up2 & MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK) >>
MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT) <<
MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT);
if ((lp_up2 != 0) &&
(lp_up2 != (tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK))) {
if (lp_up2 == 0)
return;
for (bank = MDIO_REG_BANK_TX0; bank <= MDIO_REG_BANK_TX3;
bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0)) {
CL45_RD_OVER_CL22(bp, params->port,
params->phy_addr,
bank,
MDIO_TX0_TX_DRIVER, &tx_driver);
/* replace tx_driver bits [15:12] */
if (lp_up2 !=
(tx_driver & MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK)) {
tx_driver &= ~MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK;
tx_driver |= lp_up2;
CL45_WR_OVER_CL22(bp, params->port,
params->phy_addr,
MDIO_REG_BANK_TX0,
bank,
MDIO_TX0_TX_DRIVER, tx_driver);
}
}
}
static u8 bnx2x_emac_program(struct link_params *params,
......@@ -2890,31 +2896,40 @@ static void bnx2x_ext_phy_set_pause(struct link_params *params,
MDIO_AN_DEVAD,
MDIO_AN_REG_ADV_PAUSE, val);
}
static void bnx2x_set_preemphasis(struct link_params *params)
{
u16 bank, i = 0;
struct bnx2x *bp = params->bp;
for (bank = MDIO_REG_BANK_RX0, i = 0; bank <= MDIO_REG_BANK_RX3;
bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0), i++) {
CL45_WR_OVER_CL22(bp, params->port,
params->phy_addr,
bank,
MDIO_RX0_RX_EQ_BOOST,
params->xgxs_config_rx[i]);
}
for (bank = MDIO_REG_BANK_TX0, i = 0; bank <= MDIO_REG_BANK_TX3;
bank += (MDIO_REG_BANK_TX1 - MDIO_REG_BANK_TX0), i++) {
CL45_WR_OVER_CL22(bp, params->port,
params->phy_addr,
bank,
MDIO_TX0_TX_DRIVER,
params->xgxs_config_tx[i]);
}
}
static void bnx2x_init_internal_phy(struct link_params *params,
struct link_vars *vars)
{
struct bnx2x *bp = params->bp;
u8 port = params->port;
if (!(vars->phy_flags & PHY_SGMII_FLAG)) {
u16 bank, rx_eq;
rx_eq = ((params->serdes_config &
PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_MASK) >>
PORT_HW_CFG_SERDES_RX_DRV_EQUALIZER_SHIFT);
DP(NETIF_MSG_LINK, "setting rx eq to 0x%x\n", rx_eq);
for (bank = MDIO_REG_BANK_RX0; bank <= MDIO_REG_BANK_RX_ALL;
bank += (MDIO_REG_BANK_RX1-MDIO_REG_BANK_RX0)) {
CL45_WR_OVER_CL22(bp, port,
params->phy_addr,
bank ,
MDIO_RX0_RX_EQ_BOOST,
((rx_eq &
MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK) |
MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL));
}
if ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
(params->feature_config_flags &
FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED))
bnx2x_set_preemphasis(params);
/* forced speed requested? */
if (vars->line_speed != SPEED_AUTO_NEG) {
......@@ -3038,6 +3053,35 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
}
DP(NETIF_MSG_LINK, "XGXS 8706 is initialized "
"after %d ms\n", cnt);
if ((params->feature_config_flags &
FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
u8 i;
u16 reg;
for (i = 0; i < 4; i++) {
reg = MDIO_XS_8706_REG_BANK_RX0 +
i*(MDIO_XS_8706_REG_BANK_RX1 -
MDIO_XS_8706_REG_BANK_RX0);
bnx2x_cl45_read(bp, params->port,
ext_phy_type,
ext_phy_addr,
MDIO_XS_DEVAD,
reg, &val);
/* Clear first 3 bits of the control */
val &= ~0x7;
/* Set control bits according to
configuation */
val |= (params->xgxs_config_rx[i] &
0x7);
DP(NETIF_MSG_LINK, "Setting RX"
"Equalizer to BCM8706 reg 0x%x"
" <-- val 0x%x\n", reg, val);
bnx2x_cl45_write(bp, params->port,
ext_phy_type,
ext_phy_addr,
MDIO_XS_DEVAD,
reg, val);
}
}
/* Force speed */
/* First enable LASI */
bnx2x_cl45_write(bp, params->port,
......@@ -3170,6 +3214,28 @@ static u8 bnx2x_ext_phy_init(struct link_params *params, struct link_vars *vars)
ext_phy_addr, MDIO_PMA_DEVAD,
MDIO_PMA_REG_LASI_CTRL, 1);
}
/* Set TX PreEmphasis if needed */
if ((params->feature_config_flags &
FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED)) {
DP(NETIF_MSG_LINK, "Setting TX_CTRL1 0x%x,"
"TX_CTRL2 0x%x\n",
params->xgxs_config_tx[0],
params->xgxs_config_tx[1]);
bnx2x_cl45_write(bp, params->port,
ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8726_TX_CTRL1,
params->xgxs_config_tx[0]);
bnx2x_cl45_write(bp, params->port,
ext_phy_type,
ext_phy_addr,
MDIO_PMA_DEVAD,
MDIO_PMA_REG_8726_TX_CTRL2,
params->xgxs_config_tx[1]);
}
break;
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8072:
case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8073:
......
......@@ -77,7 +77,6 @@ struct link_params {
#define SWITCH_CFG_AUTO_DETECT PORT_FEATURE_CON_SWITCH_AUTO_DETECT
u16 hw_led_mode; /* part of the hw_config read from the shmem */
u32 serdes_config;
u32 lane_config;
u32 ext_phy_config;
#define XGXS_EXT_PHY_TYPE(ext_phy_config) (ext_phy_config & \
......@@ -89,6 +88,9 @@ struct link_params {
/* phy_addr populated by the CLC */
u8 phy_addr;
u16 xgxs_config_rx[4]; /* preemphasis values for the rx side */
u16 xgxs_config_tx[4]; /* preemphasis values for the tx side */
u32 feature_config_flags;
#define FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED (1<<0)
#define FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED (2<<0)
......
......@@ -7550,6 +7550,15 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp)
SHARED_HW_CFG_LED_MODE_MASK) >>
SHARED_HW_CFG_LED_MODE_SHIFT);
bp->link_params.feature_config_flags = 0;
val = SHMEM_RD(bp, dev_info.shared_feature_config.config);
if (val & SHARED_FEAT_CFG_OVERRIDE_PREEMPHASIS_CFG_ENABLED)
bp->link_params.feature_config_flags |=
FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
else
bp->link_params.feature_config_flags &=
~FEATURE_CONFIG_OVERRIDE_PREEMPHASIS_ENABLED;
val = SHMEM_RD(bp, dev_info.bc_rev) >> 8;
bp->common.bc_ver = val;
BNX2X_DEV_INFO("bc_ver %X\n", val);
......@@ -7972,12 +7981,11 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
int port = BP_PORT(bp);
u32 val, val2;
u32 config;
u16 i;
bp->link_params.bp = bp;
bp->link_params.port = port;
bp->link_params.serdes_config =
SHMEM_RD(bp, dev_info.port_hw_config[port].serdes_config);
bp->link_params.lane_config =
SHMEM_RD(bp, dev_info.port_hw_config[port].lane_config);
bp->link_params.ext_phy_config =
......@@ -7990,6 +7998,19 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
bp->port.link_config =
SHMEM_RD(bp, dev_info.port_feature_config[port].link_config);
/* Get the 4 lanes xgxs config rx and tx */
for (i = 0; i < 2; i++) {
val = SHMEM_RD(bp,
dev_info.port_hw_config[port].xgxs_config_rx[i<<1]);
bp->link_params.xgxs_config_rx[i << 1] = ((val>>16) & 0xffff);
bp->link_params.xgxs_config_rx[(i << 1) + 1] = (val & 0xffff);
val = SHMEM_RD(bp,
dev_info.port_hw_config[port].xgxs_config_tx[i<<1]);
bp->link_params.xgxs_config_tx[i << 1] = ((val>>16) & 0xffff);
bp->link_params.xgxs_config_tx[(i << 1) + 1] = (val & 0xffff);
}
config = SHMEM_RD(bp, dev_info.port_feature_config[port].config);
if (config & PORT_FEAT_CFG_OPT_MDL_ENFRCMNT_ENABLED)
bp->link_params.feature_config_flags |=
......@@ -7998,10 +8019,8 @@ static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
bp->link_params.feature_config_flags &=
~FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED;
BNX2X_DEV_INFO("serdes_config 0x%08x lane_config 0x%08x\n"
KERN_INFO " ext_phy_config 0x%08x speed_cap_mask 0x%08x"
" link_config 0x%08x\n",
bp->link_params.serdes_config,
BNX2X_DEV_INFO("lane_config 0x%08x ext_phy_config 0x%08x"
" speed_cap_mask 0x%08x link_config 0x%08x\n",
bp->link_params.lane_config,
bp->link_params.ext_phy_config,
bp->link_params.speed_cap_mask, bp->port.link_config);
......
......@@ -5603,6 +5603,42 @@
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
#define MDIO_REG_BANK_TX1 0x8070
#define MDIO_TX1_TX_DRIVER 0x17
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
#define MDIO_REG_BANK_TX2 0x8080
#define MDIO_TX2_TX_DRIVER 0x17
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
#define MDIO_REG_BANK_TX3 0x8090
#define MDIO_TX3_TX_DRIVER 0x17
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK 0xf000
#define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT 12
#define MDIO_TX0_TX_DRIVER_IDRIVER_MASK 0x0f00
#define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT 8
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK 0x00f0
#define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT 4
#define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK 0x000e
#define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT 1
#define MDIO_TX0_TX_DRIVER_ICBUF1T 1
#define MDIO_REG_BANK_XGXS_BLOCK0 0x8000
#define MDIO_BLOCK0_XGXS_CONTROL 0x10
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment