b43: use one shared function for setting MAC frequency

By the way add few chipsets that were tracked with "wl" dumps.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

drivers/net/wireless/b43/main.c

@@ -2964,6 +2964,45 @@ void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on)
 	}
 }
 
+/* brcms_b_switch_macfreq */
+void b43_mac_switch_freq(struct b43_wldev *dev, u8 spurmode)
+{
+	u16 chip_id = dev->dev->chip_id;
+
+	if (chip_id == BCMA_CHIP_ID_BCM43217 ||
+	    chip_id == BCMA_CHIP_ID_BCM43222 ||
+	    chip_id == BCMA_CHIP_ID_BCM43224 ||
+	    chip_id == BCMA_CHIP_ID_BCM43225 ||
+	    chip_id == BCMA_CHIP_ID_BCM43227 ||
+	    chip_id == BCMA_CHIP_ID_BCM43228) {
+		switch (spurmode) {
+		case 2: /* 126 Mhz */
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x2082);
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
+			break;
+		case 1: /* 123 Mhz */
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x5341);
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
+			break;
+		default: /* 120 Mhz */
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x8889);
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
+			break;
+		}
+	} else if (dev->phy.type == B43_PHYTYPE_LCN) {
+		switch (spurmode) {
+		case 1: /* 82 Mhz */
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x7CE0);
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0xC);
+			break;
+		default: /* 80 Mhz */
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0xCCCD);
+			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0xC);
+			break;
+		}
+	}
+}
+
 static void b43_adjust_opmode(struct b43_wldev *dev)
 {
 	struct b43_wl *wl = dev->wl;

drivers/net/wireless/b43/main.h

@@ -99,6 +99,7 @@ void b43_power_saving_ctl_bits(struct b43_wldev *dev, unsigned int ps_flags);
 void b43_mac_suspend(struct b43_wldev *dev);
 void b43_mac_enable(struct b43_wldev *dev);
 void b43_mac_phy_clock_set(struct b43_wldev *dev, bool on);
+void b43_mac_switch_freq(struct b43_wldev *dev, u8 spurmode);
 
 
 struct b43_request_fw_context;

drivers/net/wireless/b43/phy_lcn.c

@@ -54,39 +54,6 @@ enum lcn_sense_type {
 	B43_SENSE_VBAT,
 };
 
-/* In theory it's PHY common function, move if needed */
-/* brcms_b_switch_macfreq */
-static void b43_phy_switch_macfreq(struct b43_wldev *dev, u8 spurmode)
-{
-	if (dev->dev->chip_id == 43224 || dev->dev->chip_id == 43225) {
-		switch (spurmode) {
-		case 2:		/* 126 Mhz */
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x2082);
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
-			break;
-		case 1:		/* 123 Mhz */
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x5341);
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
-			break;
-		default:	/* 120 Mhz */
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x8889);
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
-			break;
-		}
-	} else if (dev->phy.type == B43_PHYTYPE_LCN) {
-		switch (spurmode) {
-		case 1:		/* 82 Mhz */
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0x7CE0);
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0xC);
-			break;
-		default:	/* 80 Mhz */
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW, 0xCCCD);
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0xC);
-			break;
-		}
-	}
-}
-
 /**************************************************
  * Radio 2064.
  **************************************************/
@@ -609,7 +576,7 @@ static void b43_phy_lcn_txrx_spur_avoidance_mode(struct b43_wldev *dev,
 		b43_phy_write(dev, 0x93b, ((0 << 13) + 23));
 		b43_phy_write(dev, 0x93c, ((0 << 13) + 1989));
 	}
-	b43_phy_switch_macfreq(dev, enable);
+	b43_mac_switch_freq(dev, enable);
 }
 
 /**************************************************

drivers/net/wireless/b43/phy_n.c

@@ -6113,12 +6113,7 @@ static void b43_nphy_channel_setup(struct b43_wldev *dev,
 
 		b43_nphy_pmu_spur_avoid(dev, avoid);
 
-		if (dev->dev->chip_id == 43222 || dev->dev->chip_id == 43224 ||
-		    dev->dev->chip_id == 43225) {
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_LOW,
-				    avoid ? 0x5341 : 0x8889);
-			b43_write16(dev, B43_MMIO_TSF_CLK_FRAC_HIGH, 0x8);
-		}
+		b43_mac_switch_freq(dev, avoid);
 
 		if (dev->phy.rev == 3 || dev->phy.rev == 4)
 			; /* TODO: reset PLL */

include/linux/bcma/bcma.h

@@ -159,6 +159,7 @@ struct bcma_host_ops {
 #define BCMA_CHIP_ID_BCM4313	0x4313
 #define BCMA_CHIP_ID_BCM43142	43142
 #define BCMA_CHIP_ID_BCM43217	43217
+#define BCMA_CHIP_ID_BCM43222	43222
 #define BCMA_CHIP_ID_BCM43224	43224
 #define  BCMA_PKG_ID_BCM43224_FAB_CSM	0x8
 #define  BCMA_PKG_ID_BCM43224_FAB_SMIC	0xa