Merge tiger.hpl.hp.com:/data1/bk/vanilla/linux-2.5

into tiger.hpl.hp.com:/data1/bk/lia64/to-linus-2.5

arch/ia64/configs/zx1_defconfig

+#
+# Automatically generated make config: don't edit
+#
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_STANDALONE=y
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+
+#
+# General setup
+#
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_SYSCTL=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_HOTPLUG=y
+# CONFIG_IKCONFIG is not set
+# CONFIG_EMBEDDED is not set
+CONFIG_KALLSYMS=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+
+#
+# Loadable module support
+#
+# CONFIG_MODULES is not set
+
+#
+# Processor type and features
+#
+CONFIG_IA64=y
+CONFIG_64BIT=y
+CONFIG_MMU=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_TIME_INTERPOLATION=y
+CONFIG_EFI=y
+# CONFIG_ITANIUM is not set
+CONFIG_MCKINLEY=y
+# CONFIG_IA64_GENERIC is not set
+# CONFIG_IA64_DIG is not set
+CONFIG_IA64_HP_ZX1=y
+# CONFIG_IA64_SGI_SN2 is not set
+# CONFIG_IA64_HP_SIM is not set
+# CONFIG_IA64_PAGE_SIZE_4KB is not set
+# CONFIG_IA64_PAGE_SIZE_8KB is not set
+CONFIG_IA64_PAGE_SIZE_16KB=y
+# CONFIG_IA64_PAGE_SIZE_64KB is not set
+CONFIG_ACPI=y
+CONFIG_ACPI_INTERPRETER=y
+CONFIG_ACPI_KERNEL_CONFIG=y
+CONFIG_IA64_L1_CACHE_SHIFT=7
+# CONFIG_MCKINLEY_ASTEP_SPECIFIC is not set
+# CONFIG_NUMA is not set
+CONFIG_VIRTUAL_MEM_MAP=y
+CONFIG_IA64_MCA=y
+# CONFIG_IA64_CYCLONE is not set
+CONFIG_PM=y
+CONFIG_IOSAPIC=y
+CONFIG_FORCE_MAX_ZONEORDER=18
+# CONFIG_HUGETLB_PAGE_SIZE_4GB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1GB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_256MB is not set
+CONFIG_HUGETLB_PAGE_SIZE_64MB=y
+# CONFIG_HUGETLB_PAGE_SIZE_16MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_256KB is not set
+CONFIG_IA64_PAL_IDLE=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=16
+# CONFIG_PREEMPT is not set
+CONFIG_HAVE_DEC_LOCK=y
+CONFIG_IA32_SUPPORT=y
+CONFIG_COMPAT=y
+CONFIG_PERFMON=y
+CONFIG_IA64_PALINFO=y
+CONFIG_EFI_VARS=y
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_MISC=y
+
+#
+# ACPI (Advanced Configuration and Power Interface) Support
+#
+CONFIG_ACPI_BOOT=y
+CONFIG_ACPI_BUTTON=y
+CONFIG_ACPI_FAN=y
+CONFIG_ACPI_PROCESSOR=y
+CONFIG_ACPI_THERMAL=y
+# CONFIG_ACPI_DEBUG is not set
+CONFIG_ACPI_BUS=y
+CONFIG_ACPI_POWER=y
+CONFIG_ACPI_PCI=y
+CONFIG_ACPI_SYSTEM=y
+# CONFIG_ACPI_RELAXED_AML is not set
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_LEGACY_PROC=y
+CONFIG_PCI_NAMES=y
+
+#
+# PCI Hotplug Support
+#
+CONFIG_HOTPLUG_PCI=y
+# CONFIG_HOTPLUG_PCI_FAKE is not set
+CONFIG_HOTPLUG_PCI_ACPI=y
+# CONFIG_HOTPLUG_PCI_CPCI is not set
+# CONFIG_HOTPLUG_PCI_PCIE is not set
+# CONFIG_HOTPLUG_PCI_SHPC is not set
+
+#
+# PCMCIA/CardBus support
+#
+# CONFIG_PCMCIA is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Generic Driver Options
+#
+# CONFIG_FW_LOADER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_DCSSBLK is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_IDEDISK_STROKE is not set
+CONFIG_BLK_DEV_IDECD=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+# CONFIG_IDE_TASKFILE_IO is not set
+
+#
+# IDE chipset support/bugfixes
+#
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_IDEPCI_SHARE_IRQ=y
+# CONFIG_BLK_DEV_OFFBOARD is not set
+CONFIG_BLK_DEV_GENERIC=y
+# CONFIG_BLK_DEV_OPTI621 is not set
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
+# CONFIG_IDEDMA_PCI_AUTO is not set
+CONFIG_BLK_DEV_ADMA=y
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+CONFIG_BLK_DEV_CMD64X=y
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CY82C693 is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT34X is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDEDMA_IVB is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_DMA_NONPCI is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+CONFIG_FUSION=y
+CONFIG_FUSION_BOOT=y
+CONFIG_FUSION_MAX_SGE=40
+
+#
+# SCSI device support
+#
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_CHR_DEV_OSST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_REPORT_LUNS=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_ADVANSYS is not set
+CONFIG_SCSI_MEGARAID=y
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_CPQFCTS is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_EATA_PIO is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
+CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
+CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
+# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_PCI2000 is not set
+# CONFIG_SCSI_PCI2220I is not set
+# CONFIG_SCSI_QLOGIC_ISP is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+CONFIG_SCSI_QLOGIC_1280=y
+CONFIG_SCSI_QLA2XXX=y
+# CONFIG_SCSI_QLA21XX is not set
+# CONFIG_SCSI_QLA22XX is not set
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+
+#
+# Networking support
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+# CONFIG_NETLINK_DEV is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_INET_ECN is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+# CONFIG_IPV6 is not set
+# CONFIG_DECNET is not set
+# CONFIG_BRIDGE is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_IP_NF_CONNTRACK is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+CONFIG_IP_NF_ARPTABLES=y
+# CONFIG_IP_NF_ARPFILTER is not set
+# CONFIG_IP_NF_ARP_MANGLE is not set
+# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
+# CONFIG_IP_NF_COMPAT_IPFWADM is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+CONFIG_IPV6_SCTP__=y
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_FASTROUTE is not set
+# CONFIG_NET_HW_FLOWCONTROL is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+CONFIG_NETDEVICES=y
+
+#
+# ARCnet devices
+#
+# CONFIG_ARCNET is not set
+CONFIG_DUMMY=y
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+CONFIG_TULIP_MWI=y
+CONFIG_TULIP_MMIO=y
+CONFIG_TULIP_NAPI=y
+CONFIG_TULIP_NAPI_HW_MITIGATION=y
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_HP100 is not set
+CONFIG_NET_PCI=y
+# CONFIG_PCNET32 is not set
+# CONFIG_AMD8111_ETH is not set
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
+# CONFIG_FORCEDETH is not set
+# CONFIG_DGRS is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
+# CONFIG_E100_NAPI is not set
+# CONFIG_FEALNX is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_8139CP is not set
+# CONFIG_8139TOO is not set
+# CONFIG_SIS900 is not set
+# CONFIG_EPIC100 is not set
+# CONFIG_SUNDANCE is not set
+# CONFIG_VIA_RHINE is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+CONFIG_E1000=y
+# CONFIG_E1000_NAPI is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SK98LIN is not set
+CONFIG_TIGON3=y
+
+#
+# Ethernet (10000 Mbit)
+#
+# CONFIG_IXGB is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+
+#
+# Amateur Radio support
+#
+# CONFIG_HAMRADIO is not set
+
+#
+# IrDA (infrared) support
+#
+# CONFIG_IRDA is not set
+
+#
+# Bluetooth support
+#
+# CONFIG_BT is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=y
+# CONFIG_INPUT_TSDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input I/O drivers
+#
+# CONFIG_GAMEPORT is not set
+CONFIG_SOUND_GAMEPORT=y
+CONFIG_SERIO=y
+# CONFIG_SERIO_I8042 is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_CT82C710 is not set
+# CONFIG_SERIO_PCIPS2 is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_HCDP=y
+CONFIG_SERIAL_8250_ACPI=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_MULTIPORT is not set
+# CONFIG_SERIAL_8250_RSA is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# Mice
+#
+# CONFIG_BUSMOUSE is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_NVRAM is not set
+# CONFIG_GEN_RTC is not set
+CONFIG_EFI_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_FTAPE is not set
+CONFIG_AGP=y
+CONFIG_AGP_HP_ZX1=y
+CONFIG_DRM=y
+# CONFIG_DRM_TDFX is not set
+# CONFIG_DRM_GAMMA is not set
+# CONFIG_DRM_R128 is not set
+CONFIG_DRM_RADEON=y
+# CONFIG_DRM_MGA is not set
+# CONFIG_DRM_SIS is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# I2C support
+#
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+CONFIG_I2C_ALGOPCF=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_ELV is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISA is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VELLEMAN is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# I2C Hardware Sensors Chip support
+#
+# CONFIG_I2C_SENSOR is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_QUOTA is not set
+CONFIG_AUTOFS_FS=y
+# CONFIG_AUTOFS4_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+# CONFIG_DEVFS_FS is not set
+# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_RAMFS=y
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD_TCP is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_INTERMEZZO_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_NEC98_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=y
+CONFIG_NLS_CODEPAGE_775=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_CODEPAGE_852=y
+CONFIG_NLS_CODEPAGE_855=y
+CONFIG_NLS_CODEPAGE_857=y
+CONFIG_NLS_CODEPAGE_860=y
+CONFIG_NLS_CODEPAGE_861=y
+CONFIG_NLS_CODEPAGE_862=y
+CONFIG_NLS_CODEPAGE_863=y
+CONFIG_NLS_CODEPAGE_864=y
+CONFIG_NLS_CODEPAGE_865=y
+CONFIG_NLS_CODEPAGE_866=y
+CONFIG_NLS_CODEPAGE_869=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_CODEPAGE_874=y
+CONFIG_NLS_ISO8859_8=y
+# CONFIG_NLS_CODEPAGE_1250 is not set
+CONFIG_NLS_CODEPAGE_1251=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+CONFIG_NLS_ISO8859_3=y
+CONFIG_NLS_ISO8859_4=y
+CONFIG_NLS_ISO8859_5=y
+CONFIG_NLS_ISO8859_6=y
+CONFIG_NLS_ISO8859_7=y
+CONFIG_NLS_ISO8859_9=y
+CONFIG_NLS_ISO8859_13=y
+CONFIG_NLS_ISO8859_14=y
+CONFIG_NLS_ISO8859_15=y
+CONFIG_NLS_KOI8_R=y
+CONFIG_NLS_KOI8_U=y
+CONFIG_NLS_UTF8=y
+
+#
+# Graphics support
+#
+CONFIG_FB=y
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON_OLD is not set
+CONFIG_FB_RADEON=y
+CONFIG_FB_RADEON_I2C=y
+CONFIG_FB_RADEON_DEBUG=y
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_VIRTUAL is not set
+
+#
+# Console display driver support
+#
+CONFIG_VGA_CONSOLE=y
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_PCI_CONSOLE=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+
+#
+# Logo configuration
+#
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_LOGO_LINUX_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=y
+
+#
+# Advanced Linux Sound Architecture
+#
+CONFIG_SND=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_ALS4000 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+CONFIG_SND_FM801=y
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VX222 is not set
+
+#
+# ALSA USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# Open Sound System
+#
+# CONFIG_SOUND_PRIME is not set
+
+#
+# USB support
+#
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_BANDWIDTH=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_UHCI_HCD=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_BLUETOOTH_TTY is not set
+# CONFIG_USB_MIDI is not set
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_HP8200e is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+
+#
+# USB Human Interface Devices (HID)
+#
+CONFIG_USB_HID=y
+CONFIG_USB_HIDINPUT=y
+# CONFIG_HID_FF is not set
+CONFIG_USB_HIDDEV=y
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_XPAD is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+# CONFIG_USB_HPUSBSCSI is not set
+
+#
+# USB Multimedia devices
+#
+# CONFIG_USB_DABUSB is not set
+
+#
+# Video4Linux support is needed for USB Multimedia device support
+#
+
+#
+# USB Network adaptors
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_TIGL is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_BRLVGER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# Library routines
+#
+CONFIG_CRC32=y
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_IA64_GRANULE_16MB=y
+# CONFIG_IA64_GRANULE_64MB is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_IA64_PRINT_HAZARDS=y
+# CONFIG_DISABLE_VHPT is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_IA64_DEBUG_CMPXCHG is not set
+# CONFIG_IA64_DEBUG_IRQ is not set
+# CONFIG_DEBUG_INFO is not set
+
+#
+# Security options
+#
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set

arch/ia64/hp/common/sba_iommu.c

@@ -1479,7 +1479,6 @@ ioc_iova_init(struct ioc *ioc)
 #ifdef FULL_VALID_PDIR
 	unsigned long index;
 #endif
-	unsigned int i;
 
 	/*
 	** Firmware programs the base and size of a "safe IOVA space"
@@ -1574,18 +1573,6 @@ ioc_iova_init(struct ioc *ioc)
 	/* Enable IOVA translation */
 	WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa + IOC_IBASE);
 	READ_REG(ioc->ioc_hpa + IOC_IBASE);
-
-	/* Clear ROPE(N)_CONFIG AO bit.
-	** Disables "NT Ordering" (~= !"Relaxed Ordering")
-	** Overrides bit 1 in DMA Hint Sets.
-	** Improves netperf UDP_STREAM by ~10% for tg3 on bcm5701.
-	*/
-	for (i=0; i<(8*8); i+=8) {
-		unsigned long rope_config;
-		rope_config = READ_REG(ioc->ioc_hpa + IOC_ROPE0_CFG + i);
-		rope_config &= ~IOC_ROPE_AO;
-		WRITE_REG(rope_config, ioc->ioc_hpa + IOC_ROPE0_CFG + i);
-	}
 }
 
 static void __init
@@ -1659,26 +1646,25 @@ ioc_sac_init(struct ioc *ioc)
 static void __init
 ioc_zx1_init(struct ioc *ioc)
 {
+	unsigned long rope_config;
+	unsigned int i;
+
 	if (ioc->rev < 0x20)
 		panic(PFX "IOC 2.0 or later required for IOMMU support\n");
 
-	ioc->dma_mask = 0xFFFFFFFFFFUL;
+	/* 38 bit memory controller + extra bit for range displaced by MMIO */
+	ioc->dma_mask = (0x1UL << 39) - 1;
 
-	if (!iovp_shift) {
-		/* 64k is max iommu page size */
-		iovp_shift = min(PAGE_SHIFT, 16);
-		iovp_size = (1 << iovp_shift);
-		iovp_mask = ~(iovp_size - 1);
-	}
-}
-
-static void __init
-ioc_sx1000_init(struct ioc *ioc)
-{
-	if (!iovp_shift) {
-		iovp_shift = 12;	/* 4K for now */
-		iovp_size = (1 << iovp_shift);
-		iovp_mask = ~(iovp_size - 1);
+	/*
+	** Clear ROPE(N)_CONFIG AO bit.
+	** Disables "NT Ordering" (~= !"Relaxed Ordering")
+	** Overrides bit 1 in DMA Hint Sets.
+	** Improves netperf UDP_STREAM by ~10% for tg3 on bcm5701.
+	*/
+	for (i=0; i<(8*8); i+=8) {
+		rope_config = READ_REG(ioc->ioc_hpa + IOC_ROPE0_CFG + i);
+		rope_config &= ~IOC_ROPE_AO;
+		WRITE_REG(rope_config, ioc->ioc_hpa + IOC_ROPE0_CFG + i);
 	}
 }
 
@@ -1692,8 +1678,6 @@ struct ioc_iommu {
 
 static struct ioc_iommu ioc_iommu_info[] __initdata = {
 	{ ZX1_IOC_ID, "zx1", ioc_zx1_init },
-	{ REO_IOC_ID, "REO", ioc_sx1000_init },
-	{ SX1000_IOC_ID, "sx1000", ioc_sx1000_init },
 };
 
 static struct ioc * __init
@@ -1718,11 +1702,6 @@ ioc_init(u64 hpa, void *handle)
 	ioc->rev = READ_REG(ioc->ioc_hpa + IOC_FCLASS) & 0xFFUL;
 	ioc->dma_mask = 0xFFFFFFFFFFFFFFFFUL;	/* conservative */
 
-	if (iovp_shift) {
-		iovp_size = (1 << iovp_shift);
-		iovp_mask = ~(iovp_size - 1);
-	}
-
 	for (info = ioc_iommu_info; info < ioc_iommu_info + ARRAY_SIZE(ioc_iommu_info); info++) {
 		if (ioc->func_id == info->func_id) {
 			ioc->name = info->name;
@@ -1730,6 +1709,10 @@ ioc_init(u64 hpa, void *handle)
 				(info->init)(ioc);
 		}
 	}
+
+	iovp_size = (1 << iovp_shift);
+	iovp_mask = ~(iovp_size - 1);
+
 	DBG_INIT("%s: PAGE_SIZE %ldK, iovp_size %ldK\n", __FUNCTION__,
 		PAGE_SIZE >> 10, iovp_size >> 10);
 
@@ -1929,10 +1912,21 @@ acpi_sba_ioc_add(struct acpi_device *device)
 	 * For HWP0001, only SBA appears in ACPI namespace.  It encloses the PCI
 	 * root bridges, and its CSR space includes the IOC function.
 	 */
-	if (strncmp("HWP0001", dev_info->hardware_id.value, 7) == 0)
+	if (strncmp("HWP0001", dev_info->hardware_id.value, 7) == 0) {
 		hpa += ZX1_IOC_OFFSET;
+		/* zx1 based systems default to kernel page size iommu pages */
+		if (!iovp_shift)
+			iovp_shift = min(PAGE_SHIFT, 16);
+	}
 	ACPI_MEM_FREE(dev_info);
 
+	/*
+	 * default anything not caught above or specified on cmdline to 4k
+	 * iommu page size
+	 */
+	if (!iovp_shift)
+		iovp_shift = 12;
+
 	ioc = ioc_init(hpa, device->handle);
 	if (!ioc)
 		return 1;

arch/ia64/hp/sim/simserial.c

@@ -636,7 +636,6 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 #ifdef SIMSERIAL_DEBUG
 		printk("rs_close: hung_up\n");
 #endif
-		MOD_DEC_USE_COUNT;
 		local_irq_restore(flags);
 		return;
 	}
@@ -661,7 +660,6 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 		state->count = 0;
 	}
 	if (state->count) {
-		MOD_DEC_USE_COUNT;
 		local_irq_restore(flags);
 		return;
 	}
@@ -686,7 +684,6 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
 	}
 	info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
 	wake_up_interruptible(&info->close_wait);
-	MOD_DEC_USE_COUNT;
 }
 
 /*
@@ -874,17 +871,12 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
 	int			retval, line;
 	unsigned long		page;
 
-	MOD_INC_USE_COUNT;
 	line = tty->index;
-	if ((line < 0) || (line >= NR_PORTS)) {
-		MOD_DEC_USE_COUNT;
+	if ((line < 0) || (line >= NR_PORTS))
 		return -ENODEV;
-	}
 	retval = get_async_struct(line, &info);
-	if (retval) {
-		MOD_DEC_USE_COUNT;
+	if (retval)
 		return retval;
-	}
 	tty->driver_data = info;
 	info->tty = tty;
 
@@ -895,10 +887,8 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
 
 	if (!tmp_buf) {
 		page = get_zeroed_page(GFP_KERNEL);
-		if (!page) {
-			/* MOD_DEC_USE_COUNT; "info->tty" will cause this? */
+		if (!page)
 			return -ENOMEM;
-		}
 		if (tmp_buf)
 			free_page(page);
 		else
@@ -912,7 +902,6 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
 	    (info->flags & ASYNC_CLOSING)) {
 		if (info->flags & ASYNC_CLOSING)
 			interruptible_sleep_on(&info->close_wait);
-		/* MOD_DEC_USE_COUNT; "info->tty" will cause this? */
 #ifdef SERIAL_DO_RESTART
 		return ((info->flags & ASYNC_HUP_NOTIFY) ?
 			-EAGAIN : -ERESTARTSYS);
@@ -926,7 +915,6 @@ static int rs_open(struct tty_struct *tty, struct file * filp)
 	 */
 	retval = startup(info);
 	if (retval) {
-		/* MOD_DEC_USE_COUNT; "info->tty" will cause this? */
 		return retval;
 	}
 
@@ -1042,6 +1030,7 @@ simrs_init (void)
 
 	/* Initialize the tty_driver structure */
 
+	hp_simserial_driver->owner = THIS_MODULE;
 	hp_simserial_driver->driver_name = "simserial";
 	hp_simserial_driver->name = "ttyS";
 	hp_simserial_driver->major = TTY_MAJOR;

arch/ia64/kernel/head.S

@@ -816,7 +816,7 @@ GLOBAL_ENTRY(ia64_delay_loop)
 	br.ret.sptk.many rp
 END(ia64_delay_loop)
 
-GLOBAL_ENTRY(ia64_invoke_kernel_thread_helper)
+GLOBAL_ENTRY(start_kernel_thread)
 	.prologue
 	.save rp, r0				// this is the end of the call-chain
 	.body
@@ -827,7 +827,7 @@ GLOBAL_ENTRY(ia64_invoke_kernel_thread_helper)
 	mov out0 = r8
 	br.call.sptk.many rp = sys_exit;;
 1:	br.sptk.few 1b				// not reached
-END(ia64_invoke_kernel_thread_helper)
+END(start_kernel_thread)
 
 #ifdef CONFIG_IA64_BRL_EMU
 

arch/ia64/kernel/irq_ia64.c

@@ -57,6 +57,21 @@ __u8 isa_irq_to_vector_map[16] = {
 };
 EXPORT_SYMBOL(isa_irq_to_vector_map);
 
+static inline void
+irq_enter (void)
+{
+	preempt_count() += HARDIRQ_OFFSET;
+}
+
+static inline void
+irq_exit (void)
+{
+	preempt_count() -= IRQ_EXIT_OFFSET;
+	if (!in_interrupt() && local_softirq_pending())
+		do_softirq();
+	preempt_enable_no_resched();
+}
+
 int
 ia64_alloc_vector (void)
 {

arch/ia64/kernel/mca.c

@@ -103,8 +103,6 @@ extern void			ia64_slave_init_handler (void);
 
 static ia64_mc_info_t		ia64_mc_info;
 
-extern struct hw_interrupt_type	irq_type_iosapic_level;
-
 struct ia64_mca_tlb_info ia64_mca_tlb_list[NR_CPUS];
 
 #define MAX_CPE_POLL_INTERVAL (15*60*HZ) /* 15 minutes */
@@ -1253,7 +1251,6 @@ ia64_mca_init(void)
 				if (irq_to_vector(irq) == cpev) {
 					desc = irq_descp(irq);
 					desc->status |= IRQ_PER_CPU;
-					desc->handler = &irq_type_iosapic_level;
 					setup_irq(irq, &mca_cpe_irqaction);
 				}
 			ia64_mca_register_cpev(cpev);

arch/ia64/kernel/process.c

@@ -574,8 +574,8 @@ ia64_set_personality (struct elf64_hdr *elf_ex, int ibcs2_interpreter)
 pid_t
 kernel_thread (int (*fn)(void *), void *arg, unsigned long flags)
 {
-	extern void ia64_invoke_kernel_thread_helper (void);
-	unsigned long *helper_fptr = (unsigned long *) &ia64_invoke_kernel_thread_helper;
+	extern void start_kernel_thread (void);
+	unsigned long *helper_fptr = (unsigned long *) &start_kernel_thread;
 	struct {
 		struct switch_stack sw;
 		struct pt_regs pt;

arch/ia64/kernel/sal.c

@@ -10,7 +10,6 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/smp.h>
 #include <linux/spinlock.h>
 #include <linux/string.h>
 
@@ -21,6 +20,12 @@
 spinlock_t sal_lock __cacheline_aligned = SPIN_LOCK_UNLOCKED;
 unsigned long sal_platform_features;
 
+unsigned short sal_revision;
+unsigned short sal_version;
+
+#define SAL_MAJOR(x) ((x) >> 8)
+#define SAL_MINOR(x) ((x) & 0xff)
+
 static struct {
 	void *addr;	/* function entry point */
 	void *gpval;	/* gp value to use */
@@ -86,13 +91,98 @@ ia64_sal_handler_init (void *entry_point, void *gpval)
 	ia64_sal = (ia64_sal_handler) &pdesc;
 }
 
+static void __init
+check_versions (struct ia64_sal_systab *systab)
+{
+	sal_revision = (systab->sal_rev_major << 8) | systab->sal_rev_minor;
+	sal_version = (systab->sal_b_rev_major << 8) | systab->sal_b_rev_minor;
+
+	/* Check for broken firmware */
+	if ((sal_revision == SAL_VERSION_CODE(49, 29))
+	    && (sal_version == SAL_VERSION_CODE(49, 29)))
+	{
+		/*
+		 * Old firmware for zx2000 prototypes have this weird version number,
+		 * reset it to something sane.
+		 */
+		sal_revision = SAL_VERSION_CODE(2, 8);
+		sal_version = SAL_VERSION_CODE(0, 0);
+	}
+}
+
+static void __init
+sal_desc_entry_point (void *p)
+{
+	struct ia64_sal_desc_entry_point *ep = p;
+	ia64_pal_handler_init(__va(ep->pal_proc));
+	ia64_sal_handler_init(__va(ep->sal_proc), __va(ep->gp));
+}
+
+#ifdef CONFIG_SMP
+static void __init
+set_smp_redirect (int flag)
+{
+	if (no_int_routing)
+		smp_int_redirect &= ~flag;
+	else
+		smp_int_redirect |= flag;
+}
+#else
+#define set_smp_redirect(flag)	do { } while (0)
+#endif
+
+static void __init
+sal_desc_platform_feature (void *p)
+{
+	struct ia64_sal_desc_platform_feature *pf = p;
+	sal_platform_features = pf->feature_mask;
+
+	printk(KERN_INFO "SAL Platform features:");
+	if (!sal_platform_features) {
+		printk(" None\n");
+		return;
+	}
+
+	if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_BUS_LOCK)
+		printk(" BusLock");
+	if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT) {
+		printk(" IRQ_Redirection");
+		set_smp_redirect(SMP_IRQ_REDIRECTION);
+	}
+	if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT) {
+		printk(" IPI_Redirection");
+		set_smp_redirect(SMP_IPI_REDIRECTION);
+	}
+	if (sal_platform_features & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)
+		printk(" ITC_Drift");
+	printk("\n");
+}
+
+#ifdef CONFIG_SMP
+static void __init
+sal_desc_ap_wakeup (void *p)
+{
+	struct ia64_sal_desc_ap_wakeup *ap = p;
+
+	switch (ap->mechanism) {
+	case IA64_SAL_AP_EXTERNAL_INT:
+		ap_wakeup_vector = ap->vector;
+		printk(KERN_INFO "SAL: AP wakeup using external interrupt "
+				"vector 0x%lx\n", ap_wakeup_vector);
+		break;
+	default:
+		printk(KERN_ERR "SAL: AP wakeup mechanism unsupported!\n");
+		break;
+	}
+}
+#else
+static void __init sal_desc_ap_wakeup(void *p) { }
+#endif
 
 void __init
 ia64_sal_init (struct ia64_sal_systab *systab)
 {
-	unsigned long min, max;
 	char *p;
-	struct ia64_sal_desc_entry_point *ep;
 	int i;
 
 	if (!systab) {
@@ -103,85 +193,34 @@ ia64_sal_init (struct ia64_sal_systab *systab)
 	if (strncmp(systab->signature, "SST_", 4) != 0)
 		printk(KERN_ERR "bad signature in system table!");
 
-	/*
-	 * revisions are coded in BCD, so %x does the job for us
-	 */
-	printk(KERN_INFO "SAL v%x.%x: oem=%.32s, product=%.32s\n",
-	       systab->sal_rev_major, systab->sal_rev_minor,
-	       systab->oem_id, systab->product_id);
+	check_versions(systab);
 
-	min = ~0UL;
-	max = 0;
+	/* revisions are coded in BCD, so %x does the job for us */
+	printk(KERN_INFO "SAL %x.%x: %.32s %.32s%sversion %x.%x\n",
+			SAL_MAJOR(sal_revision), SAL_MINOR(sal_revision),
+			systab->oem_id, systab->product_id,
+			systab->product_id[0] ? " " : "",
+			SAL_MAJOR(sal_version), SAL_MINOR(sal_version));
 
 	p = (char *) (systab + 1);
 	for (i = 0; i < systab->entry_count; i++) {
 		/*
-		 * The first byte of each entry type contains the type descriptor.
+		 * The first byte of each entry type contains the type
+		 * descriptor.
 		 */
 		switch (*p) {
-		      case SAL_DESC_ENTRY_POINT:
-			ep = (struct ia64_sal_desc_entry_point *) p;
-			printk(KERN_INFO "SAL: entry: pal_proc=0x%lx, sal_proc=0x%lx\n",
-			       ep->pal_proc, ep->sal_proc);
-			ia64_pal_handler_init(__va(ep->pal_proc));
-			ia64_sal_handler_init(__va(ep->sal_proc), __va(ep->gp));
+		case SAL_DESC_ENTRY_POINT:
+			sal_desc_entry_point(p);
 			break;
-
-		      case SAL_DESC_PTC:
+		case SAL_DESC_PLATFORM_FEATURE:
+			sal_desc_platform_feature(p);
+			break;
+		case SAL_DESC_PTC:
 			ia64_ptc_domain_info = (ia64_sal_desc_ptc_t *)p;
 			break;
-
-		      case SAL_DESC_AP_WAKEUP:
-#ifdef CONFIG_SMP
-		      {
-			      struct ia64_sal_desc_ap_wakeup *ap = (void *) p;
-
-			      switch (ap->mechanism) {
-				    case IA64_SAL_AP_EXTERNAL_INT:
-				      ap_wakeup_vector = ap->vector;
-				      printk(KERN_INFO "SAL: AP wakeup using external interrupt "
-					     "vector 0x%lx\n", ap_wakeup_vector);
-				      break;
-
-				    default:
-				      printk(KERN_ERR "SAL: AP wakeup mechanism unsupported!\n");
-				      break;
-			      }
-			      break;
-		      }
-#endif
-		      case SAL_DESC_PLATFORM_FEATURE:
-		      {
-			      struct ia64_sal_desc_platform_feature *pf = (void *) p;
-			      sal_platform_features = pf->feature_mask;
-			      printk(KERN_INFO "SAL: Platform features ");
-
-			      if (pf->feature_mask & IA64_SAL_PLATFORM_FEATURE_BUS_LOCK)
-				      printk("BusLock ");
-			      if (pf->feature_mask & IA64_SAL_PLATFORM_FEATURE_IRQ_REDIR_HINT) {
-				      printk("IRQ_Redirection ");
-#ifdef CONFIG_SMP
-				      if (no_int_routing)
-					      smp_int_redirect &= ~SMP_IRQ_REDIRECTION;
-				      else
-					      smp_int_redirect |= SMP_IRQ_REDIRECTION;
-#endif
-			      }
-			      if (pf->feature_mask & IA64_SAL_PLATFORM_FEATURE_IPI_REDIR_HINT) {
-				      printk("IPI_Redirection ");
-#ifdef CONFIG_SMP
-				      if (no_int_routing)
-					      smp_int_redirect &= ~SMP_IPI_REDIRECTION;
-				      else
-					      smp_int_redirect |= SMP_IPI_REDIRECTION;
-#endif
-			      }
-			      if (pf->feature_mask & IA64_SAL_PLATFORM_FEATURE_ITC_DRIFT)
-				      printk("ITC_Drift ");
-			      printk("\n");
-			      break;
- 		      }
-
+		case SAL_DESC_AP_WAKEUP:
+			sal_desc_ap_wakeup(p);
+			break;
 		}
 		p += SAL_DESC_SIZE(*p);
 	}

arch/ia64/pci/pci.c

@@ -57,17 +57,16 @@ struct pci_fixup pcibios_fixups[1];
 	((u64)(seg << 24) | (u64)(bus << 16) | \
 	 (u64)(devfn << 8) | (u64)(reg))
 
-
 static int
 pci_sal_read (int seg, int bus, int devfn, int reg, int len, u32 *value)
 {
 	int result = 0;
 	u64 data = 0;
 
-	if (!value || (seg > 255) || (bus > 255) || (devfn > 255) || (reg > 255))
+	if ((seg > 255) || (bus > 255) || (devfn > 255) || (reg > 255))
 		return -EINVAL;
 
-	result = ia64_sal_pci_config_read(PCI_SAL_ADDRESS(seg, bus, devfn, reg), len, &data);
+	result = ia64_sal_pci_config_read(PCI_SAL_ADDRESS(seg, bus, devfn, reg), 0, len, &data);
 
 	*value = (u32) data;
 
@@ -80,15 +79,62 @@ pci_sal_write (int seg, int bus, int devfn, int reg, int len, u32 value)
 	if ((seg > 255) || (bus > 255) || (devfn > 255) || (reg > 255))
 		return -EINVAL;
 
-	return ia64_sal_pci_config_write(PCI_SAL_ADDRESS(seg, bus, devfn, reg), len, value);
+	return ia64_sal_pci_config_write(PCI_SAL_ADDRESS(seg, bus, devfn, reg), 0, len, value);
 }
 
-struct pci_raw_ops pci_sal_ops = {
+static struct pci_raw_ops pci_sal_ops = {
 	.read = 	pci_sal_read,
 	.write =	pci_sal_write
 };
 
-struct pci_raw_ops *raw_pci_ops = &pci_sal_ops;	/* default to SAL */
+/* SAL 3.2 adds support for extended config space. */
+
+#define PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg) \
+	((u64)(seg << 28) | (u64)(bus << 20) | \
+	 (u64)(devfn << 12) | (u64)(reg))
+
+static int
+pci_sal_ext_read (int seg, int bus, int devfn, int reg, int len, u32 *value)
+{
+	int result = 0;
+	u64 data = 0;
+
+	if ((seg > 65535) || (bus > 255) || (devfn > 255) || (reg > 4095))
+		return -EINVAL;
+
+	result = ia64_sal_pci_config_read(PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg), 1, len, &data);
+
+	*value = (u32) data;
+
+	return result;
+}
+
+static int
+pci_sal_ext_write (int seg, int bus, int devfn, int reg, int len, u32 value)
+{
+	if ((seg > 65535) || (bus > 255) || (devfn > 255) || (reg > 4095))
+		return -EINVAL;
+
+	return ia64_sal_pci_config_write(PCI_SAL_EXT_ADDRESS(seg, bus, devfn, reg), 1, len, value);
+}
+
+static struct pci_raw_ops pci_sal_ext_ops = {
+	.read = 	pci_sal_ext_read,
+	.write =	pci_sal_ext_write
+};
+
+struct pci_raw_ops *raw_pci_ops = &pci_sal_ops;	/* default to SAL < 3.2 */
+
+static int __init
+pci_set_sal_ops (void)
+{
+	if (sal_version >= SAL_VERSION_CODE(3, 2)) {
+		raw_pci_ops = &pci_sal_ext_ops;
+	}
+	return 0;
+}
+
+arch_initcall(pci_set_sal_ops);
 
 
 static int
@@ -139,7 +185,8 @@ alloc_pci_controller (int seg)
 }
 
 static int __devinit
-alloc_resource (char *name, struct resource *root, unsigned long start, unsigned long end, unsigned long flags)
+alloc_resource (char *name, struct resource *root, unsigned long start, unsigned long end,
+		unsigned long flags)
 {
 	struct resource *res;
 

drivers/char/sn_serial.c

@@ -952,6 +952,7 @@ static void
 sn_sal_console_write(struct console *co, const char *s, unsigned count)
 {
 	unsigned long flags;
+	const char *s1;
 
 	BUG_ON(!sn_sal_is_asynch);
 
@@ -959,15 +960,36 @@ sn_sal_console_write(struct console *co, const char *s, unsigned count)
 	 * oops, kdb, panic, etc.  make sure they get it. */
 	if (spin_is_locked(&sn_sal_lock)) {
 		synch_flush_xmit();
+		/* Output '\r' before each '\n' */
+		while ((s1 = memchr(s, '\n', count)) != NULL) {
+			sn_func->sal_puts(s, s1 - s);
+			sn_func->sal_puts("\r\n", 2);
+			count -= s1 + 1 - s;
+			s = s1 + 1;
+		}
 		sn_func->sal_puts(s, count);
 	}
 	else if (in_interrupt()) {
 		spin_lock_irqsave(&sn_sal_lock, flags);
 		synch_flush_xmit();
 		spin_unlock_irqrestore(&sn_sal_lock, flags);
+		/* Output '\r' before each '\n' */
+		while ((s1 = memchr(s, '\n', count)) != NULL) {
+			sn_func->sal_puts(s, s1 - s);
+			sn_func->sal_puts("\r\n", 2);
+			count -= s1 + 1 - s;
+			s = s1 + 1;
+		}
 		sn_func->sal_puts(s, count);
 	}
 	else
+		/* Output '\r' before each '\n' */
+		while ((s1 = memchr(s, '\n', count)) != NULL) {
+			sn_sal_write(NULL, 0, s, s1 - s);
+			sn_sal_write(NULL, 0, "\r\n", 2);
+			count -= s1 + 1 - s;
+			s = s1 + 1;
+		}
 		sn_sal_write(NULL, 0, s, count);
 }
 

include/asm-ia64/hardirq.h

@@ -2,7 +2,7 @@
 #define _ASM_IA64_HARDIRQ_H
 
 /*
- * Copyright (C) 1998-2002 Hewlett-Packard Co
+ * Modified 1998-2002, 2004 Hewlett-Packard Co
  *	David Mosberger-Tang <davidm@hpl.hp.com>
  */
 
@@ -86,8 +86,6 @@
 #define hardirq_trylock()	(!in_interrupt())
 #define hardirq_endlock()	do { } while (0)
 
-#define irq_enter()		(preempt_count() += HARDIRQ_OFFSET)
-
 #ifdef CONFIG_PREEMPT
 # include <linux/smp_lock.h>
 # define in_atomic()		((preempt_count() & ~PREEMPT_ACTIVE) != kernel_locked())
@@ -97,14 +95,6 @@
 # define IRQ_EXIT_OFFSET HARDIRQ_OFFSET
 #endif
 
-#define irq_exit()						\
-do {								\
-		preempt_count() -= IRQ_EXIT_OFFSET;		\
-		if (!in_interrupt() && local_softirq_pending())	\
-			do_softirq();				\
-		preempt_enable_no_resched();			\
-} while (0)
-
 #ifdef CONFIG_SMP
   extern void synchronize_irq (unsigned int irq);
 #else

include/asm-ia64/sal.h

@@ -35,6 +35,7 @@
 
 #ifndef __ASSEMBLY__
 
+#include <linux/bcd.h>
 #include <linux/spinlock.h>
 #include <linux/efi.h>
 
@@ -229,6 +230,10 @@ typedef struct ia64_sal_desc_ap_wakeup {
 extern ia64_sal_handler ia64_sal;
 extern struct ia64_sal_desc_ptc *ia64_ptc_domain_info;
 
+extern unsigned short sal_revision;	/* supported SAL spec revision */
+extern unsigned short sal_version;	/* SAL version; OEM dependent */
+#define SAL_VERSION_CODE(major, minor) ((BIN2BCD(major) << 8) | BIN2BCD(minor))
+
 extern const char *ia64_sal_strerror (long status);
 extern void ia64_sal_init (struct ia64_sal_systab *sal_systab);
 
@@ -741,10 +746,10 @@ ia64_sal_mc_set_params (u64 param_type, u64 i_or_m, u64 i_or_m_val, u64 timeout,
 
 /* Read from PCI configuration space */
 static inline s64
-ia64_sal_pci_config_read (u64 pci_config_addr, u64 size, u64 *value)
+ia64_sal_pci_config_read (u64 pci_config_addr, int type, u64 size, u64 *value)
 {
 	struct ia64_sal_retval isrv;
-	SAL_CALL(isrv, SAL_PCI_CONFIG_READ, pci_config_addr, size, 0, 0, 0, 0, 0);
+	SAL_CALL(isrv, SAL_PCI_CONFIG_READ, pci_config_addr, size, type, 0, 0, 0, 0);
 	if (value)
 		*value = isrv.v0;
 	return isrv.status;
@@ -752,11 +757,11 @@ ia64_sal_pci_config_read (u64 pci_config_addr, u64 size, u64 *value)
 
 /* Write to PCI configuration space */
 static inline s64
-ia64_sal_pci_config_write (u64 pci_config_addr, u64 size, u64 value)
+ia64_sal_pci_config_write (u64 pci_config_addr, int type, u64 size, u64 value)
 {
 	struct ia64_sal_retval isrv;
 	SAL_CALL(isrv, SAL_PCI_CONFIG_WRITE, pci_config_addr, size, value,
-	         0, 0, 0, 0);
+	         type, 0, 0, 0);
 	return isrv.status;
 }
 

include/asm-ia64/sn/router.h

@@ -20,6 +20,7 @@
 #include <asm/sn/vector.h>
 #include <asm/sn/slotnum.h>
 #include <asm/sn/arch.h>
+#include <asm/sn/sgi.h>
 
 typedef uint64_t	router_reg_t;