Commit c429a247 authored by Seth Heasley's avatar Seth Heasley Committed by Jean Delvare

i2c-i801: Add support for Intel Ibex Peak

Adds the Intel Ibex Peak (PCH) SMBus Controller Device IDs.
Signed-off-by: default avatarSeth Heasley <seth.heasley@intel.com>
Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
parent 2515ddc6
......@@ -13,8 +13,9 @@ Supported adapters:
* Intel 631xESB/632xESB (ESB2)
* Intel 82801H (ICH8)
* Intel 82801I (ICH9)
* Intel Tolapai
* Intel ICH10
* Intel EP80579 (Tolapai)
* Intel 82801JI (ICH10)
* Intel PCH
Datasheets: Publicly available at the Intel website
Authors:
......@@ -32,7 +33,7 @@ Description
-----------
The ICH (properly known as the 82801AA), ICH0 (82801AB), ICH2 (82801BA),
ICH3 (82801CA/CAM) and later devices are Intel chips that are a part of
ICH3 (82801CA/CAM) and later devices (PCH) are Intel chips that are a part of
Intel's '810' chipset for Celeron-based PCs, '810E' chipset for
Pentium-based PCs, '815E' chipset, and others.
......
......@@ -97,6 +97,7 @@ config I2C_I801
ICH9
Tolapai
ICH10
PCH
This driver can also be built as a module. If so, the module
will be called i2c-i801.
......
......@@ -41,6 +41,7 @@
Tolapai 0x5032 32 hard yes yes yes
ICH10 0x3a30 32 hard yes yes yes
ICH10 0x3a60 32 hard yes yes yes
PCH 0x3b30 32 hard yes yes yes
Features supported by this driver:
Software PEC no
......@@ -576,6 +577,7 @@ static struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) },
{ 0, }
};
......@@ -599,6 +601,7 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
case PCI_DEVICE_ID_INTEL_ICH10_4:
case PCI_DEVICE_ID_INTEL_ICH10_5:
case PCI_DEVICE_ID_INTEL_PCH_SMBUS:
i801_features |= FEATURE_I2C_BLOCK_READ;
/* fall through */
case PCI_DEVICE_ID_INTEL_82801DB_3:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment