Commit c44efbaa authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/linux-arm-soc: (32 commits)
  ARM: mmp: Change the way we use timer 0 as clockevent timer.
  ARM: mmp: Switch to using timer 1 as clocksource timer.
  ARM: mmp: Also start timer 1 on boot.
  ARM: pxa168/gplugd: free correct GPIO
  ARM: pxa168/gplugd: get rid of mfp-gplugd.h
  ARM: pxa: fix logic error in PJ4 iWMMXt handling
  mach-sa1100: fix PCI build problem
  omap: timer: Set dmtimer used as clocksource in autoreload mode
  OMAP3: am3517crane: remove NULL board_mux from board file
  arm: mach-omap2: mux: use kstrdup()
  arch:arm:plat-omap:iovmm: remove unused variable 'va'
  Update Nook Color machine 3284 to common Encore name
  am3505/3517: Various platform defines for UART4
  OMAP: hwmod: fix build break on non-OMAP4 multi-OMAP2 builds
  OMAP: Fix linking error in twl-common.c for OMAP2/3/4 only builds
  iMX: Fix build for iMX53
  ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage
  OMAP2+: PM: SmartReflex: use put_sync_suspend for IRQ-safe disabling
  OMAP3: beagle: don't touch omap_device internals
  OMAP1: enable GENERIC_IRQ_CHIP
  ...
parents ce8a84ef 696314cf
......@@ -195,10 +195,10 @@ ENTRY(iwmmxt_task_disable)
@ enable access to CP0 and CP1
XSC(mrc p15, 0, r4, c15, c1, 0)
XSC(orr r4, r4, #0xf)
XSC(orr r4, r4, #0x3)
XSC(mcr p15, 0, r4, c15, c1, 0)
PJ4(mrc p15, 0, r4, c1, c0, 2)
PJ4(orr r4, r4, #0x3)
PJ4(orr r4, r4, #0xf)
PJ4(mcr p15, 0, r4, c1, c0, 2)
mov r0, #0 @ nothing to load
......@@ -313,7 +313,7 @@ ENTRY(iwmmxt_task_switch)
teq r2, r3 @ next task owns it?
movne pc, lr @ no: leave Concan disabled
1: @ flip Conan access
1: @ flip Concan access
XSC(eor r1, r1, #0x3)
XSC(mcr p15, 0, r1, c15, c1, 0)
PJ4(eor r1, r1, #0xf)
......
......@@ -331,6 +331,9 @@ int __init mx25_clocks_init(void)
__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
CRM_BASE + 0x64);
/* Clock source for gpt is ahb_div */
__raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64);
mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
......
......@@ -30,6 +30,7 @@
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <sound/tlv320aic32x4.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
......@@ -196,6 +197,17 @@ static struct pca953x_platform_data visstrim_m10_pca9555_pdata = {
.invert = 0,
};
static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = {
.power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN |
AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE |
AIC32X4_PWR_AIC32X4_LDO_ENABLE |
AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 |
AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED,
.micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K |
AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K,
.swapdacs = false,
};
static struct i2c_board_info visstrim_m10_i2c_devices[] = {
{
I2C_BOARD_INFO("pca9555", 0x20),
......@@ -203,6 +215,7 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = {
},
{
I2C_BOARD_INFO("tlv320aic32x4", 0x18),
.platform_data = &visstrim_m10_aic32x4_pdata,
}
};
......
......@@ -468,7 +468,7 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = {
#endif
};
static void mxc_init_i2c(void)
static void __init mxc_init_i2c(void)
{
i2c_register_board_info(1, mx31ads_i2c1_devices,
ARRAY_SIZE(mx31ads_i2c1_devices));
......@@ -486,7 +486,7 @@ static unsigned int ssi_pins[] = {
MX31_PIN_STXD5__STXD5,
};
static void mxc_init_audio(void)
static void __init mxc_init_audio(void)
{
imx31_add_imx_ssi(0, NULL);
mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
......
......@@ -192,7 +192,7 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = {
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
};
static void lilly1131_usb_init(void)
static void __init lilly1131_usb_init(void)
{
imx31_add_mxc_ehci_hs(1, &usbh1_pdata);
......
......@@ -16,16 +16,18 @@
#include <mach/gpio.h>
#include <mach/pxa168.h>
#include <mach/mfp-pxa168.h>
#include <mach/mfp-gplugd.h>
#include "common.h"
static unsigned long gplugd_pin_config[] __initdata = {
/* UART3 */
GPIO8_UART3_SOUT,
GPIO9_UART3_SIN,
GPI1O_UART3_CTS,
GPI11_UART3_RTS,
GPIO8_UART3_TXD,
GPIO9_UART3_RXD,
GPIO1O_UART3_CTS,
GPIO11_UART3_RTS,
/* USB OTG PEN */
GPIO18_GPIO,
/* MMC2 */
GPIO28_MMC2_CMD,
......@@ -109,6 +111,12 @@ static unsigned long gplugd_pin_config[] __initdata = {
GPIO105_CI2C_SDA,
GPIO106_CI2C_SCL,
/* SPI NOR Flash on SSP2 */
GPIO107_SSP2_RXD,
GPIO108_SSP2_TXD,
GPIO110_GPIO, /* SPI_CSn */
GPIO111_SSP2_CLK,
/* Select JTAG */
GPIO109_GPIO,
......@@ -154,7 +162,7 @@ static void __init select_disp_freq(void)
"frequency\n");
} else {
gpio_direction_output(35, 1);
gpio_free(104);
gpio_free(35);
}
if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) {
......@@ -162,7 +170,7 @@ static void __init select_disp_freq(void)
"frequency\n");
} else {
gpio_direction_output(85, 0);
gpio_free(104);
gpio_free(85);
}
}
......
/*
* linux/arch/arm/mach-mmp/include/mach/mfp-gplugd.h
*
* MFP definitions used in gplugD
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __MACH_MFP_GPLUGD_H
#define __MACH_MFP_GPLUGD_H
#include <plat/mfp.h>
#include <mach/mfp.h>
/* UART3 */
#define GPIO8_UART3_SOUT MFP_CFG(GPIO8, AF2)
#define GPIO9_UART3_SIN MFP_CFG(GPIO9, AF2)
#define GPI1O_UART3_CTS MFP_CFG(GPIO10, AF2)
#define GPI11_UART3_RTS MFP_CFG(GPIO11, AF2)
/* MMC2 */
#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST)
#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST)
#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST)
#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST)
#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST)
#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST)
/* I2S */
#undef GPIO114_I2S_FRM
#undef GPIO115_I2S_BCLK
#define GPIO114_I2S_FRM MFP_CFG_DRV(GPIO114, AF1, FAST)
#define GPIO115_I2S_BCLK MFP_CFG_DRV(GPIO115, AF1, FAST)
#define GPIO116_I2S_TXD MFP_CFG_DRV(GPIO116, AF1, FAST)
/* MMC4 */
#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST)
#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST)
#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST)
#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST)
#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST)
#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST)
/* OTG GPIO */
#define GPIO_USB_OTG_PEN 18
#define GPIO_USB_OIDIR 20
/* Other GPIOs are 35, 84, 85 */
#endif /* __MACH_MFP_GPLUGD_H */
......@@ -203,6 +203,10 @@
#define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3)
/* UART */
#define GPIO8_UART3_TXD MFP_CFG(GPIO8, AF2)
#define GPIO9_UART3_RXD MFP_CFG(GPIO9, AF2)
#define GPIO1O_UART3_CTS MFP_CFG(GPIO10, AF2)
#define GPIO11_UART3_RTS MFP_CFG(GPIO11, AF2)
#define GPIO88_UART2_TXD MFP_CFG(GPIO88, AF2)
#define GPIO89_UART2_RXD MFP_CFG(GPIO89, AF2)
#define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST)
......@@ -232,6 +236,22 @@
#define GPIO53_MMC1_CD MFP_CFG(GPIO53, AF1)
#define GPIO46_MMC1_WP MFP_CFG(GPIO46, AF1)
/* MMC2 */
#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST)
#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST)
#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST)
#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST)
#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST)
#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST)
/* MMC4 */
#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST)
#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST)
#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST)
#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST)
#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST)
#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST)
/* LCD */
#define GPIO84_LCD_CS MFP_CFG(GPIO84, AF1)
#define GPIO60_LCD_DD0 MFP_CFG(GPIO60, AF1)
......@@ -269,11 +289,12 @@
#define GPIO106_CI2C_SCL MFP_CFG(GPIO106, AF1)
/* I2S */
#define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6)
#define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1)
#define GPIO115_I2S_BCLK MFP_CFG(GPIO115,AF1)
#define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2)
#define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2)
#define GPIO113_I2S_MCLK MFP_CFG(GPIO113, AF6)
#define GPIO114_I2S_FRM MFP_CFG(GPIO114, AF1)
#define GPIO115_I2S_BCLK MFP_CFG(GPIO115, AF1)
#define GPIO116_I2S_RXD MFP_CFG(GPIO116, AF2)
#define GPIO116_I2S_TXD MFP_CFG(GPIO116, AF1)
#define GPIO117_I2S_TXD MFP_CFG(GPIO117, AF2)
/* PWM */
#define GPIO96_PWM3_OUT MFP_CFG(GPIO96, AF1)
......@@ -324,4 +345,10 @@
#define GPIO101_MII_MDIO MFP_CFG(GPIO101, AF5)
#define GPIO103_RX_DV MFP_CFG(GPIO103, AF5)
/* SSP2 */
#define GPIO107_SSP2_RXD MFP_CFG(GPIO107, AF4)
#define GPIO108_SSP2_TXD MFP_CFG(GPIO108, AF4)
#define GPIO111_SSP2_CLK MFP_CFG(GPIO111, AF4)
#define GPIO112_SSP2_FRM MFP_CFG(GPIO112, AF4)
#endif /* __ASM_MACH_MFP_PXA168_H */
......@@ -51,12 +51,12 @@ static inline uint32_t timer_read(void)
{
int delay = 100;
__raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0));
__raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1));
while (delay--)
cpu_relax();
return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0));
return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1));
}
unsigned long long notrace sched_clock(void)
......@@ -75,28 +75,51 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *c = dev_id;
/* disable and clear pending interrupt status */
__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
__raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0));
/*
* Clear pending interrupt status.
*/
__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
/*
* Disable timer 0.
*/
__raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
c->event_handler(c);
return IRQ_HANDLED;
}
static int timer_set_next_event(unsigned long delta,
struct clock_event_device *dev)
{
unsigned long flags, next;
unsigned long flags;
local_irq_save(flags);
/* clear pending interrupt status and enable */
/*
* Disable timer 0.
*/
__raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER);
/*
* Clear and enable timer match 0 interrupt.
*/
__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0));
__raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0));
next = timer_read() + delta;
__raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
/*
* Setup new clockevent timer value.
*/
__raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0));
/*
* Enable timer 0.
*/
__raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER);
local_irq_restore(flags);
return 0;
}
......@@ -145,23 +168,26 @@ static struct clocksource cksrc = {
static void __init timer_config(void)
{
uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR);
uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER);
uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR);
__raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */
__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */
ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3);
ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) :
(TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3));
__raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR);
/* free-running mode */
__raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR);
/* set timer 0 to periodic mode, and timer 1 to free-running mode */
__raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR);
__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */
__raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */
__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0)); /* clear status */
__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0));
/* enable timer counter */
__raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER);
__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */
__raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1)); /* clear status */
__raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1));
/* enable timer 1 counter */
__raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER);
}
static struct irqaction timer_irq = {
......
......@@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
.irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
.irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
.irqflags = IRQF_TRIGGER_HIGH,
.uartclk = CPUIMX51_QUART_XTAL,
.regshift = CPUIMX51_QUART_REGSHIFT,
......
......@@ -369,7 +369,7 @@ static void __init mx51_babbage_init(void)
ARRAY_SIZE(mx51babbage_pads));
imx51_add_imx_uart(0, &uart_pdata);
imx51_add_imx_uart(1, &uart_pdata);
imx51_add_imx_uart(1, NULL);
imx51_add_imx_uart(2, &uart_pdata);
babbage_fec_reset();
......
......@@ -108,9 +108,9 @@ static void __init mx51_efikamx_board_id(void)
gpio_request(EFIKAMX_PCBID2, "pcbid2");
gpio_direction_input(EFIKAMX_PCBID2);
id = gpio_get_value(EFIKAMX_PCBID0);
id |= gpio_get_value(EFIKAMX_PCBID1) << 1;
id |= gpio_get_value(EFIKAMX_PCBID2) << 2;
id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0;
id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1;
id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2;
switch (id) {
case 7:
......
......@@ -156,23 +156,24 @@ static struct gpio_keys_button mx51_efikasb_keys[] = {
{
.code = KEY_POWER,
.gpio = EFIKASB_PWRKEY,
.type = EV_PWR,
.type = EV_KEY,
.desc = "Power Button",
.wakeup = 1,
.debounce_interval = 10, /* ms */
.active_low = 1,
},
{
.code = SW_LID,
.gpio = EFIKASB_LID,
.type = EV_SW,
.desc = "Lid Switch",
.active_low = 1,
},
{
/* SW_RFKILLALL vs KEY_RFKILL ? */
.code = SW_RFKILL_ALL,
.code = KEY_RFKILL,
.gpio = EFIKASB_RFKILL,
.type = EV_SW,
.type = EV_KEY,
.desc = "rfkill",
.active_low = 1,
},
};
......@@ -224,8 +225,8 @@ static void __init mx51_efikasb_board_id(void)
gpio_request(EFIKASB_PCBID1, "pcb id1");
gpio_direction_input(EFIKASB_PCBID1);
id = gpio_get_value(EFIKASB_PCBID0);
id |= gpio_get_value(EFIKASB_PCBID1) << 1;
id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0;
id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1;
switch (id) {
default:
......
......@@ -271,7 +271,11 @@ static int _clk_pll_enable(struct clk *clk)
int i = 0;
pllbase = _get_pll_base(clk);
reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
if (reg & MXC_PLL_DP_CTL_UPEN)
return 0;
reg |= MXC_PLL_DP_CTL_UPEN;
__raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
/* Wait for lock */
......
......@@ -186,7 +186,7 @@ static int initialize_usbh1_port(struct platform_device *pdev)
mdelay(10);
return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD);
return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD);
}
static struct mxc_usbh_platform_data usbh1_config = {
......
......@@ -7,7 +7,6 @@ config ARCH_OMAP2PLUS_TYPICAL
default y
select AEABI
select REGULATOR
select PM
select PM_RUNTIME
select VFP
select NEON if ARCH_OMAP3 || ARCH_OMAP4
......
......@@ -45,8 +45,6 @@ static struct omap_board_config_kernel am3517_crane_config[] __initdata = {
static struct omap_board_mux board_mux[] __initdata = {
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#else
#define board_mux NULL
#endif
static void __init am3517_crane_init_early(void)
......
......@@ -491,23 +491,22 @@ static void __init beagle_opp_init(void)
/* Custom OPP enabled for all xM versions */
if (cpu_is_omap3630()) {
struct omap_hwmod *mh = omap_hwmod_lookup("mpu");
struct omap_hwmod *dh = omap_hwmod_lookup("iva");
struct device *dev;
struct device *mpu_dev, *iva_dev;
if (!mh || !dh) {
mpu_dev = omap2_get_mpuss_device();
iva_dev = omap2_get_iva_device();
if (!mpu_dev || !iva_dev) {
pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n",
__func__, mh, dh);
__func__, mpu_dev, iva_dev);
return;
}
/* Enable MPU 1GHz and lower opps */
dev = &mh->od->pdev.dev;
r = opp_enable(dev, 800000000);
r = opp_enable(mpu_dev, 800000000);
/* TODO: MPU 1GHz needs SR and ABB */
/* Enable IVA 800MHz and lower opps */
dev = &dh->od->pdev.dev;
r |= opp_enable(dev, 660000000);
r |= opp_enable(iva_dev, 660000000);
/* TODO: DSP 800MHz needs SR and ABB */
if (r) {
pr_err("%s: failed to enable higher opp %d\n",
......@@ -516,10 +515,8 @@ static void __init beagle_opp_init(void)
* Cleanup - disable the higher freqs - we dont care
* about the results
*/
dev = &mh->od->pdev.dev;
opp_disable(dev, 800000000);
dev = &dh->od->pdev.dev;
opp_disable(dev, 660000000);
opp_disable(mpu_dev, 800000000);
opp_disable(iva_dev, 660000000);
}
}
return;
......
......@@ -18,13 +18,36 @@ extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs);
extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs);
extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
# ifdef CONFIG_ARCH_OMAP4
extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs);
# else
static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs)
{
return 0;
}
static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
s16 cdoffs, u16 clkctrl_offs)
{
}
static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
u16 clkctrl_offs)
{
}
# endif
/*
* In an ideal world, we would not export these low-level functions,
* but this will probably take some time to fix properly
......
......@@ -821,11 +821,10 @@ static void __init omap_mux_set_cmdline_signals(void)
if (!omap_mux_options)
return;
options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL);
options = kstrdup(omap_mux_options, GFP_KERNEL);
if (!options)
return;
strcpy(options, omap_mux_options);
next_opt = options;
while ((token = strsep(&next_opt, ",")) != NULL) {
......@@ -855,24 +854,19 @@ static int __init omap_mux_copy_names(struct omap_mux *src,
for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
if (src->muxnames[i]) {
dst->muxnames[i] =
kmalloc(strlen(src->muxnames[i]) + 1,
dst->muxnames[i] = kstrdup(src->muxnames[i],
GFP_KERNEL);
if (!dst->muxnames[i])
goto free;
strcpy(dst->muxnames[i], src->muxnames[i]);
}
}
#ifdef CONFIG_DEBUG_FS
for (i = 0; i < OMAP_MUX_NR_SIDES; i++) {
if (src->balls[i]) {
dst->balls[i] =
kmalloc(strlen(src->balls[i]) + 1,
GFP_KERNEL);
dst->balls[i] = kstrdup(src->balls[i], GFP_KERNEL);
if (!dst->balls[i])
goto free;
strcpy(dst->balls[i], src->balls[i]);
}
}
#endif
......
......@@ -621,7 +621,7 @@ void sr_disable(struct voltagedomain *voltdm)
sr_v2_disable(sr);
}
pm_runtime_put_sync(&sr->pdev->dev);
pm_runtime_put_sync_suspend(&sr->pdev->dev);
}
/**
......@@ -860,6 +860,7 @@ static int __init omap_sr_probe(struct platform_device *pdev)
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
pm_runtime_enable(&pdev->dev);
pm_runtime_irq_safe(&pdev->dev);
sr_info->pdev = pdev;
sr_info->srid = pdev->id;
......
......@@ -293,7 +293,8 @@ static void __init omap2_gp_clocksource_init(int gptimer_id,
pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n",
gptimer_id, clksrc.rate);
__omap_dm_timer_load_start(clksrc.io_base, OMAP_TIMER_CTRL_ST, 0, 1);
__omap_dm_timer_load_start(clksrc.io_base,
OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1);
init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate);
if (clocksource_register_hz(&clocksource_gpt, clksrc.rate))
......
......@@ -48,14 +48,7 @@ void __init omap_pmic_init(int bus, u32 clkrate,
omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
}
static struct twl4030_usb_data omap4_usb_pdata = {
.phy_init = omap4430_phy_init,
.phy_exit = omap4430_phy_exit,
.phy_power = omap4430_phy_power,
.phy_set_clock = omap4430_phy_set_clk,
.phy_suspend = omap4430_phy_suspend,
};
#if defined(CONFIG_ARCH_OMAP3)
static struct twl4030_usb_data omap3_usb_pdata = {
.usb_mode = T2_USB_MODE_ULPI,
};
......@@ -122,6 +115,45 @@ static struct regulator_init_data omap3_vpll2_idata = {
.consumer_supplies = omap3_vpll2_supplies,
};
void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags)
{
if (!pmic_data->irq_base)
pmic_data->irq_base = TWL4030_IRQ_BASE;
if (!pmic_data->irq_end)
pmic_data->irq_end = TWL4030_IRQ_END;
/* Common platform data configurations */
if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
pmic_data->usb = &omap3_usb_pdata;
if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci)
pmic_data->bci = &omap3_bci_pdata;
if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc)
pmic_data->madc = &omap3_madc_pdata;
if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio)
pmic_data->audio = &omap3_audio_pdata;
/* Common regulator configurations */
if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
pmic_data->vdac = &omap3_vdac_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2)
pmic_data->vpll2 = &omap3_vpll2_idata;
}
#endif /* CONFIG_ARCH_OMAP3 */
#if defined(CONFIG_ARCH_OMAP4)
static struct twl4030_usb_data omap4_usb_pdata = {
.phy_init = omap4430_phy_init,
.phy_exit = omap4430_phy_exit,
.phy_power = omap4430_phy_power,
.phy_set_clock = omap4430_phy_set_clk,
.phy_suspend = omap4430_phy_suspend,
};
static struct regulator_init_data omap4_vdac_idata = {
.constraints = {
.min_uV = 1800000,
......@@ -273,32 +305,4 @@ void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data,
!pmic_data->clk32kg)
pmic_data->clk32kg = &omap4_clk32kg_idata;
}
void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
u32 pdata_flags, u32 regulators_flags)
{
if (!pmic_data->irq_base)
pmic_data->irq_base = TWL4030_IRQ_BASE;
if (!pmic_data->irq_end)
pmic_data->irq_end = TWL4030_IRQ_END;
/* Common platform data configurations */
if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb)
pmic_data->usb = &omap3_usb_pdata;
if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci)
pmic_data->bci = &omap3_bci_pdata;
if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc)
pmic_data->madc = &omap3_madc_pdata;
if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio)
pmic_data->audio = &omap3_audio_pdata;
/* Common regulator configurations */
if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac)
pmic_data->vdac = &omap3_vdac_idata;
if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2)
pmic_data->vpll2 = &omap3_vpll2_idata;
}
#endif /* CONFIG_ARCH_OMAP4 */
......@@ -28,6 +28,7 @@
#include <asm/mach-types.h>
#include <mach/nanoengine.h>
#include <mach/hardware.h>
static DEFINE_SPINLOCK(nano_lock);
......
......@@ -44,6 +44,14 @@
#define UART_PADDR MX51_UART1_BASE_ADDR
#endif
/* iMX50/53 have same addresses, but not iMX51 */
#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53)
#ifdef UART_PADDR
#error "CONFIG_DEBUG_LL is incompatible with multiple archs"
#endif
#define UART_PADDR MX53_UART1_BASE_ADDR
#endif
#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR)
.macro addruart, rp, rv
......
......@@ -30,6 +30,9 @@
#define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \
PAD_CTL_SRE_FAST)
#define PAD_CTRL_I2C (PAD_CTL_SRE_FAST | PAD_CTL_ODE | PAD_CTL_PKE | \
PAD_CTL_PUE | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP \
| PAD_CTL_HYS)
#define _MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0)
#define _MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0)
......@@ -1256,7 +1259,7 @@
#define MX53_PAD_KEY_COL3__GPIO4_12 (_MX53_PAD_KEY_COL3__GPIO4_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_COL3__USBOH3_H2_DP (_MX53_PAD_KEY_COL3__USBOH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_COL3__SPDIF_IN1 (_MX53_PAD_KEY_COL3__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_KEY_COL3__ECSPI1_SS3 (_MX53_PAD_KEY_COL3__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_COL3__FEC_CRS (_MX53_PAD_KEY_COL3__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK (_MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL))
......@@ -1264,7 +1267,7 @@
#define MX53_PAD_KEY_ROW3__GPIO4_13 (_MX53_PAD_KEY_ROW3__GPIO4_13 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_ROW3__USBOH3_H2_DM (_MX53_PAD_KEY_ROW3__USBOH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK (_MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT (_MX53_PAD_KEY_ROW3__OSC32K_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP (_MX53_PAD_KEY_ROW3__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 (_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
......@@ -1536,7 +1539,7 @@
#define MX53_PAD_CSI0_DAT8__KPP_COL_7 (_MX53_PAD_CSI0_DAT8__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK (_MX53_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC (_MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 (_MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 (_MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 (_MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL))
......@@ -1544,7 +1547,7 @@
#define MX53_PAD_CSI0_DAT9__KPP_ROW_7 (_MX53_PAD_CSI0_DAT9__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI (_MX53_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR (_MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 (_MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 (_MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 (_MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL))
......@@ -1631,25 +1634,25 @@
#define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS (_MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_EB2__ECSPI1_SS0 (_MX53_PAD_EIM_EB2__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_EIM_D16__EMI_WEIM_D_16 (_MX53_PAD_EIM_D16__EMI_WEIM_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D16__GPIO3_16 (_MX53_PAD_EIM_D16__GPIO3_16 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D16__IPU_DI0_PIN5 (_MX53_PAD_EIM_D16__IPU_DI0_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK (_MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D16__ECSPI1_SCLK (_MX53_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_EIM_D17__EMI_WEIM_D_17 (_MX53_PAD_EIM_D17__EMI_WEIM_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D17__GPIO3_17 (_MX53_PAD_EIM_D17__GPIO3_17 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D17__IPU_DI0_PIN6 (_MX53_PAD_EIM_D17__IPU_DI0_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN (_MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D17__ECSPI1_MISO (_MX53_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_EIM_D18__EMI_WEIM_D_18 (_MX53_PAD_EIM_D18__EMI_WEIM_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D18__GPIO3_18 (_MX53_PAD_EIM_D18__GPIO3_18 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D18__IPU_DI0_PIN7 (_MX53_PAD_EIM_D18__IPU_DI0_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO (_MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D18__ECSPI1_MOSI (_MX53_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_EIM_D18__IPU_DI1_D0_CS (_MX53_PAD_EIM_D18__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D19__EMI_WEIM_D_19 (_MX53_PAD_EIM_D19__EMI_WEIM_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D19__GPIO3_19 (_MX53_PAD_EIM_D19__GPIO3_19 | MUX_PAD_CTRL(NO_PAD_CTRL))
......@@ -1672,7 +1675,7 @@
#define MX53_PAD_EIM_D21__IPU_DI0_PIN17 (_MX53_PAD_EIM_D21__IPU_DI0_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK (_MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D21__CSPI_SCLK (_MX53_PAD_EIM_D21__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC (_MX53_PAD_EIM_D21__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D22__EMI_WEIM_D_22 (_MX53_PAD_EIM_D22__EMI_WEIM_D_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D22__GPIO3_22 (_MX53_PAD_EIM_D22__GPIO3_22 | MUX_PAD_CTRL(NO_PAD_CTRL))
......@@ -1732,7 +1735,7 @@
#define MX53_PAD_EIM_D28__UART2_CTS (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL))
#define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO (_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D28__CSPI_MOSI (_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_EIM_D28__IPU_EXT_TRIG (_MX53_PAD_EIM_D28__IPU_EXT_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D28__IPU_DI0_PIN13 (_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_EIM_D29__EMI_WEIM_D_29 (_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL))
......@@ -2297,7 +2300,7 @@
#define MX53_PAD_GPIO_9__SCC_FAIL_STATE (_MX53_PAD_GPIO_9__SCC_FAIL_STATE | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_3__ESAI1_HCKR (_MX53_PAD_GPIO_3__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_3__GPIO1_3 (_MX53_PAD_GPIO_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN (_MX53_PAD_GPIO_3__DPLLIP1_TOG_EN | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_3__CCM_CLKO2 (_MX53_PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 (_MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 | MUX_PAD_CTRL(NO_PAD_CTRL))
......@@ -2305,7 +2308,7 @@
#define MX53_PAD_GPIO_3__MLB_MLBCLK (_MX53_PAD_GPIO_3__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_6__ESAI1_SCKT (_MX53_PAD_GPIO_6__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_6__GPIO1_6 (_MX53_PAD_GPIO_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 (_MX53_PAD_GPIO_6__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB (_MX53_PAD_GPIO_6__CSU_CSU_INT_DEB | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 (_MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL))
......@@ -2333,7 +2336,7 @@
#define MX53_PAD_GPIO_5__CCM_CLKO (_MX53_PAD_GPIO_5__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 (_MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 (_MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_GPIO_5__CCM_PLL1_BYP (_MX53_PAD_GPIO_5__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 (_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_7__GPIO1_7 (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL))
......@@ -2356,7 +2359,7 @@
#define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT (_MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 (_MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_16__SPDIF_IN1 (_MX53_PAD_GPIO_16__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C))
#define MX53_PAD_GPIO_16__SJC_DE_B (_MX53_PAD_GPIO_16__SJC_DE_B | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_17__ESAI1_TX0 (_MX53_PAD_GPIO_17__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL))
#define MX53_PAD_GPIO_17__GPIO7_12 (_MX53_PAD_GPIO_17__GPIO7_12 | MUX_PAD_CTRL(NO_PAD_CTRL))
......
......@@ -13,6 +13,7 @@ config ARCH_OMAP1
bool "TI OMAP1"
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
help
"Systems based on omap7xx, omap15xx or omap16xx"
......
......@@ -195,6 +195,11 @@
#define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */
#define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */
/* Only for AM35xx */
#define AM35XX_DMA_UART4_TX 54
#define AM35XX_DMA_UART4_RX 55
/*----------------------------------------------------------------------------*/
#define OMAP1_DMA_TOUT_IRQ (1 << 0)
......
......@@ -357,6 +357,7 @@
#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69
#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70
#define INT_35XX_USBOTG_IRQ 71
#define INT_35XX_UART4 84
#define INT_35XX_CCDC_VD0_IRQ 88
#define INT_35XX_CCDC_VD1_IRQ 92
#define INT_35XX_CCDC_VD2_IRQ 93
......
......@@ -56,6 +56,9 @@
#define TI816X_UART2_BASE 0x48022000
#define TI816X_UART3_BASE 0x48024000
/* AM3505/3517 UART4 */
#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */
/* External port on Zoom2/3 */
#define ZOOM_UART_BASE 0x10000000
#define ZOOM_UART_VIRT 0xfa400000
......
......@@ -423,9 +423,6 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, u32 da,
{
unsigned int i;
struct scatterlist *sg;
void *va;
va = phys_to_virt(pa);
for_each_sg(sgt->sgl, sg, sgt->nents, i) {
unsigned bytes;
......
......@@ -910,7 +910,7 @@ omapl138_case_a3 MACH_OMAPL138_CASE_A3 OMAPL138_CASE_A3 3280
uemd MACH_UEMD UEMD 3281
ccwmx51mut MACH_CCWMX51MUT CCWMX51MUT 3282
rockhopper MACH_ROCKHOPPER ROCKHOPPER 3283
nookcolor MACH_NOOKCOLOR NOOKCOLOR 3284
encore MACH_ENCORE ENCORE 3284
hkdkc100 MACH_HKDKC100 HKDKC100 3285
ts42xx MACH_TS42XX TS42XX 3286
aebl MACH_AEBL AEBL 3287
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment