ARM: dts: imx53-qsb: Make USBH1 functional

mx53qsb uses GPIO7_8 to turn on VBUS, so add support for it.

Also specify the PHY type in the device tree.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx53-qsb.dts

@@ -93,6 +93,15 @@ reg_3p2v: 3p2v {
 			regulator-max-microvolt = <3200000>;
 			regulator-always-on;
 		};
+
+		reg_usb_vbus: usb_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio7 8 0>;
+			enable-active-high;
+		};
 	};
 
 	sound {
@@ -145,6 +154,7 @@ MX53_PAD_EIM_DA11__GPIO3_11       0x80000000
 				MX53_PAD_EIM_DA12__GPIO3_12       0x80000000
 				MX53_PAD_EIM_DA13__GPIO3_13       0x80000000
 				MX53_PAD_PATA_DA_0__GPIO7_6       0x80000000
+				MX53_PAD_PATA_DA_2__GPIO7_8	  0x80000000
 				MX53_PAD_GPIO_16__GPIO7_11        0x80000000
 			>;
 		};
@@ -302,6 +312,8 @@ &vpu {
 };
 
 &usbh1 {
+	vbus-supply = <&reg_usb_vbus>;
+	phy_type = "utmi";
 	status = "okay";
 };