Merge bk://gkernel.bkbits.net/libata-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Documentation/atomic_ops.txt

@@ -4,8 +4,8 @@
 			  David S. Miller	 
 
 	This document is intended to serve as a guide to Linux port
-maintainers on how to implement atomic counter and bitops interfaces
-properly.
+maintainers on how to implement atomic counter, bitops, and spinlock
+interfaces properly.
 
 	The atomic_t type should be defined as a signed integer.
 Also, it should be made opaque such that any kind of cast to a normal
@@ -242,6 +242,19 @@ happen.  Specifically, in the above case the atomic_dec_and_test()
 counter decrement would not become globally visible until the
 obj->active update does.
 
+As a historical note, 32-bit Sparc used to only allow usage of
+24-bits of it's atomic_t type.  This was because it used 8 bits
+as a spinlock for SMP safety.  Sparc32 lacked a "compare and swap"
+type instruction.  However, 32-bit Sparc has since been moved over
+to a "hash table of spinlocks" scheme, that allows the full 32-bit
+counter to be realized.  Essentially, an array of spinlocks are
+indexed into based upon the address of the atomic_t being operated
+on, and that lock protects the atomic operation.  Parisc uses the
+same scheme.
+
+Another note is that the atomic_t operations returning values are
+extremely slow on an old 386.
+
 We will now cover the atomic bitmask operations.  You will find that
 their SMP and memory barrier semantics are similar in shape and scope
 to the atomic_t ops above.
@@ -345,3 +358,99 @@ except that two underscores are prefixed to the interface name.
 
 These non-atomic variants also do not require any special memory
 barrier semantics.
+
+The routines xchg() and cmpxchg() need the same exact memory barriers
+as the atomic and bit operations returning values.
+
+Spinlocks and rwlocks have memory barrier expectations as well.
+The rule to follow is simple:
+
+1) When acquiring a lock, the implementation must make it globally
+   visible before any subsequent memory operation.
+
+2) When releasing a lock, the implementation must make it such that
+   all previous memory operations are globally visible before the
+   lock release.
+
+Which finally brings us to _atomic_dec_and_lock().  There is an
+architecture-neutral version implemented in lib/dec_and_lock.c,
+but most platforms will wish to optimize this in assembler.
+
+	int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock);
+
+Atomically decrement the given counter, and if will drop to zero
+atomically acquire the given spinlock and perform the decrement
+of the counter to zero.  If it does not drop to zero, do nothing
+with the spinlock.
+
+It is actually pretty simple to get the memory barrier correct.
+Simply satisfy the spinlock grab requirements, which is make
+sure the spinlock operation is globally visible before any
+subsequent memory operation.
+
+We can demonstrate this operation more clearly if we define
+an abstract atomic operation:
+
+	long cas(long *mem, long old, long new);
+
+"cas" stands for "compare and swap".  It atomically:
+
+1) Compares "old" with the value currently at "mem".
+2) If they are equal, "new" is written to "mem".
+3) Regardless, the current value at "mem" is returned.
+
+As an example usage, here is what an atomic counter update
+might look like:
+
+void example_atomic_inc(long *counter)
+{
+	long old, new, ret;
+
+	while (1) {
+		old = *counter;
+		new = old + 1;
+
+		ret = cas(counter, old, new);
+		if (ret == old)
+			break;
+	}
+}
+
+Let's use cas() in order to build a pseudo-C atomic_dec_and_lock():
+
+int _atomic_dec_and_lock(atomic_t *atomic, spinlock_t *lock)
+{
+	long old, new, ret;
+	int went_to_zero;
+
+	went_to_zero = 0;
+	while (1) {
+		old = atomic_read(atomic);
+		new = old - 1;
+		if (new == 0) {
+			went_to_zero = 1;
+			spin_lock(lock);
+		}
+		ret = cas(atomic, old, new);
+		if (ret == old)
+			break;
+		if (went_to_zero) {
+			spin_unlock(lock);
+			went_to_zero = 0;
+		}
+	}
+
+	return went_to_zero;
+}
+
+Now, as far as memory barriers go, as long as spin_lock()
+strictly orders all subsequent memory operations (including
+the cas()) with respect to itself, things will be fine.
+
+Said another way, _atomic_dec_and_lock() must guarentee that
+a counter dropping to zero is never made visible before the
+spinlock being acquired.
+
+Note that this also means that for the case where the counter
+is not dropping to zero, there are no memory ordering
+requirements.

arch/i386/crypto/aes.c

@@ -93,12 +93,12 @@ static u32 rcon_tab[RC_LENGTH];
 
 u32 ft_tab[4][256];
 u32 fl_tab[4][256];
-u32 ls_tab[4][256];
-u32 im_tab[4][256];
+static u32 ls_tab[4][256];
+static u32 im_tab[4][256];
 u32 il_tab[4][256];
 u32 it_tab[4][256];
 
-void gen_tabs(void)
+static void gen_tabs(void)
 {
 	u32 i, w;
 	u8 pow[512], log[256];

arch/sparc64/lib/debuglocks.c

@@ -172,6 +172,7 @@ void _do_read_unlock (rwlock_t *rw, char *str)
 runlock_again:
 	/* Spin trying to decrement the counter using casx.  */
 	__asm__ __volatile__(
+"	membar	#StoreLoad | #LoadLoad\n"
 "	ldx	[%0], %%g5\n"
 "	sub	%%g5, 1, %%g7\n"
 "	casx	[%0], %%g5, %%g7\n"
@@ -290,6 +291,7 @@ void _do_write_unlock(rwlock_t *rw)
 	current->thread.smp_lock_count--;
 wlock_again:
 	__asm__ __volatile__(
+"	membar	#StoreLoad | #LoadLoad\n"
 "	mov	1, %%g3\n"
 "	sllx	%%g3, 63, %%g3\n"
 "	ldx	[%0], %%g5\n"

drivers/atm/horizon.c

@@ -39,6 +39,7 @@
 #include <linux/uio.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
+#include <linux/wait.h>
 
 #include <asm/system.h>
 #include <asm/io.h>
@@ -1089,13 +1090,11 @@ static inline void rx_bus_master_complete_handler (hrz_dev * dev) {
 /********** (queue to) become the next TX thread **********/
 
 static inline int tx_hold (hrz_dev * dev) {
-  while (test_and_set_bit (tx_busy, &dev->flags)) {
-    PRINTD (DBG_TX, "sleeping at tx lock %p %lu", dev, dev->flags);
-    interruptible_sleep_on (&dev->tx_queue);
-    PRINTD (DBG_TX, "woken at tx lock %p %lu", dev, dev->flags);
-    if (signal_pending (current))
-      return -1;
-  }
+  PRINTD (DBG_TX, "sleeping at tx lock %p %lu", dev, dev->flags);
+  wait_event_interruptible(dev->tx_queue, (!test_and_set_bit(tx_busy, &dev->flags)));
+  PRINTD (DBG_TX, "woken at tx lock %p %lu", dev, dev->flags);
+  if (signal_pending (current))
+    return -1;
   PRINTD (DBG_TX, "set tx_busy for dev %p", dev);
   return 0;
 }

drivers/atm/iphase.c

@@ -53,6 +53,7 @@
 #include <linux/delay.h>  
 #include <linux/uio.h>  
 #include <linux/init.h>  
+#include <linux/wait.h>
 #include <asm/system.h>  
 #include <asm/io.h>  
 #include <asm/atomic.h>  
@@ -2586,14 +2587,14 @@ static int __init ia_start(struct atm_dev *dev)
 }  
   
 static void ia_close(struct atm_vcc *vcc)  
-{  
+{
+	DEFINE_WAIT(wait);
         u16 *vc_table;
         IADEV *iadev;
         struct ia_vcc *ia_vcc;
         struct sk_buff *skb = NULL;
         struct sk_buff_head tmp_tx_backlog, tmp_vcc_backlog;
         unsigned long closetime, flags;
-        int ctimeout;
 
         iadev = INPH_IA_DEV(vcc->dev);
         ia_vcc = INPH_IA_VCC(vcc);
@@ -2606,7 +2607,9 @@ static void ia_close(struct atm_vcc *vcc)
         skb_queue_head_init (&tmp_vcc_backlog); 
         if (vcc->qos.txtp.traffic_class != ATM_NONE) {
            iadev->close_pending++;
-           sleep_on_timeout(&iadev->timeout_wait, 50);
+	   prepare_to_wait(&iadev->timeout_wait, &wait, TASK_UNINTERRUPTIBLE);
+	   schedule_timeout(50);
+	   finish_wait(&iadev->timeout_wait, &wait);
            spin_lock_irqsave(&iadev->tx_lock, flags); 
            while((skb = skb_dequeue(&iadev->tx_backlog))) {
               if (ATM_SKB(skb)->vcc == vcc){ 
@@ -2619,17 +2622,12 @@ static void ia_close(struct atm_vcc *vcc)
            while((skb = skb_dequeue(&tmp_tx_backlog))) 
              skb_queue_tail(&iadev->tx_backlog, skb);
            IF_EVENT(printk("IA TX Done decs_cnt = %d\n", ia_vcc->vc_desc_cnt);) 
-           closetime = jiffies;
-           ctimeout = 300000 / ia_vcc->pcr;
-           if (ctimeout == 0)
-              ctimeout = 1;
-           while (ia_vcc->vc_desc_cnt > 0){
-              if ((jiffies - closetime) >= ctimeout) 
-                 break;
-              spin_unlock_irqrestore(&iadev->tx_lock, flags);
-              sleep_on(&iadev->close_wait);
-              spin_lock_irqsave(&iadev->tx_lock, flags);
-           }    
+           closetime = 300000 / ia_vcc->pcr;
+           if (closetime == 0)
+              closetime = 1;
+           spin_unlock_irqrestore(&iadev->tx_lock, flags);
+           wait_event_timeout(iadev->close_wait, (ia_vcc->vc_desc_cnt <= 0), closetime);
+           spin_lock_irqsave(&iadev->tx_lock, flags);
            iadev->close_pending--;
            iadev->testTable[vcc->vci]->lastTime = 0;
            iadev->testTable[vcc->vci]->fract = 0; 

drivers/atm/zatm.c

@@ -22,6 +22,7 @@
 #include <linux/atm_zatm.h>
 #include <linux/capability.h>
 #include <linux/bitops.h>
+#include <linux/wait.h>
 #include <asm/byteorder.h>
 #include <asm/system.h>
 #include <asm/string.h>
@@ -867,31 +868,21 @@ static void close_tx(struct atm_vcc *vcc)
 	struct zatm_vcc *zatm_vcc;
 	unsigned long flags;
 	int chan;
-struct sk_buff *skb;
-int once = 1;
 
 	zatm_vcc = ZATM_VCC(vcc);
 	zatm_dev = ZATM_DEV(vcc->dev);
 	chan = zatm_vcc->tx_chan;
 	if (!chan) return;
 	DPRINTK("close_tx\n");
-	while (skb_peek(&zatm_vcc->backlog)) {
-if (once) {
-printk("waiting for backlog to drain ...\n");
-event_dump();
-once = 0;
-}
-		sleep_on(&zatm_vcc->tx_wait);
+	if (skb_peek(&zatm_vcc->backlog)) {
+		printk("waiting for backlog to drain ...\n");
+		event_dump();
+		wait_event(zatm_vcc->tx_wait, !skb_peek(&zatm_vcc->backlog));
 	}
-once = 1;
-	while ((skb = skb_peek(&zatm_vcc->tx_queue))) {
-if (once) {
-printk("waiting for TX queue to drain ... %p\n",skb);
-event_dump();
-once = 0;
-}
-		DPRINTK("waiting for TX queue to drain ... %p\n",skb);
-		sleep_on(&zatm_vcc->tx_wait);
+	if (skb_peek(&zatm_vcc->tx_queue)) {
+		printk("waiting for TX queue to drain ...\n");
+		event_dump();
+		wait_event(zatm_vcc->tx_wait, !skb_peek(&zatm_vcc->tx_queue));
 	}
 	spin_lock_irqsave(&zatm_dev->lock, flags);
 #if 0

drivers/block/sx8.c

@@ -1503,7 +1503,8 @@ static int carm_init_disks(struct carm_host *host)
 		}
 
 		port->disk = disk;
-		sprintf(disk->disk_name, DRV_NAME "/%u", (host->id * CARM_MAX_PORTS) + i);
+		sprintf(disk->disk_name, DRV_NAME "/%u",
+			(unsigned int) (host->id * CARM_MAX_PORTS) + i);
 		sprintf(disk->devfs_name, DRV_NAME "/%u_%u", host->id, i);
 		disk->major = host->major;
 		disk->first_minor = i * CARM_MINORS_PER_MAJOR;

drivers/bluetooth/Kconfig

@@ -75,6 +75,17 @@ config BT_HCIBCM203X
 	  Say Y here to compile support for HCI BCM203x devices into the
 	  kernel or say M to compile it as module (bcm203x).
 
+config BT_HCIBPA10X
+	tristate "HCI BPA10x USB driver"
+	depends on USB
+	help
+	  Bluetooth HCI BPA10x USB driver.
+	  This driver provides support for the Digianswer BPA 100/105 Bluetooth
+	  sniffer devices.
+
+	  Say Y here to compile support for HCI BPA10x devices into the
+	  kernel or say M to compile it as module (bpa10x).
+
 config BT_HCIBFUSB
 	tristate "HCI BlueFRITZ! USB driver"
 	depends on USB

drivers/bluetooth/Makefile

@@ -6,6 +6,7 @@ obj-$(CONFIG_BT_HCIUSB)		+= hci_usb.o
 obj-$(CONFIG_BT_HCIVHCI)	+= hci_vhci.o
 obj-$(CONFIG_BT_HCIUART)	+= hci_uart.o
 obj-$(CONFIG_BT_HCIBCM203X)	+= bcm203x.o
+obj-$(CONFIG_BT_HCIBPA10X)	+= bpa10x.o
 obj-$(CONFIG_BT_HCIBFUSB)	+= bfusb.o
 obj-$(CONFIG_BT_HCIDTL1)	+= dtl1_cs.o
 obj-$(CONFIG_BT_HCIBT3C)	+= bt3c_cs.o

drivers/bluetooth/bpa10x.c

+/*
+ *
+ *  Digianswer Bluetooth USB driver
+ *
+ *  Copyright (C) 2004-2005  Marcel Holtmann <marcel@holtmann.org>
+ *
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+
+#include <linux/usb.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#ifndef CONFIG_BT_HCIBPA10X_DEBUG
+#undef  BT_DBG
+#define BT_DBG(D...)
+#endif
+
+#define VERSION "0.8"
+
+static int ignore = 0;
+
+static struct usb_device_id bpa10x_table[] = {
+	/* Tektronix BPA 100/105 (Digianswer) */
+	{ USB_DEVICE(0x08fd, 0x0002) },
+
+	{ }	/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, bpa10x_table);
+
+#define BPA10X_CMD_EP		0x00
+#define BPA10X_EVT_EP		0x81
+#define BPA10X_TX_EP		0x02
+#define BPA10X_RX_EP		0x82
+
+#define BPA10X_CMD_BUF_SIZE	252
+#define BPA10X_EVT_BUF_SIZE	16
+#define BPA10X_TX_BUF_SIZE	384
+#define BPA10X_RX_BUF_SIZE	384
+
+struct bpa10x_data {
+	struct hci_dev		*hdev;
+	struct usb_device	*udev;
+
+	rwlock_t		lock;
+
+	struct sk_buff_head	cmd_queue;
+	struct urb		*cmd_urb;
+	struct urb		*evt_urb;
+	struct sk_buff		*evt_skb;
+	unsigned int		evt_len;
+
+	struct sk_buff_head	tx_queue;
+	struct urb		*tx_urb;
+	struct urb		*rx_urb;
+};
+
+#define HCI_VENDOR_HDR_SIZE	5
+
+struct hci_vendor_hdr {
+	__u8	type;
+	__u16	snum;
+	__u16	dlen;
+} __attribute__ ((packed));
+
+static void bpa10x_recv_bulk(struct bpa10x_data *data, unsigned char *buf, int count)
+{
+	struct hci_acl_hdr *ah;
+	struct hci_sco_hdr *sh;
+	struct hci_vendor_hdr *vh;
+	struct sk_buff *skb;
+	int len;
+
+	while (count) {
+		switch (*buf++) {
+		case HCI_ACLDATA_PKT:
+			ah = (struct hci_acl_hdr *) buf;
+			len = HCI_ACL_HDR_SIZE + __le16_to_cpu(ah->dlen);
+			skb = bt_skb_alloc(len, GFP_ATOMIC);
+			if (skb) {
+				memcpy(skb_put(skb, len), buf, len);
+				skb->dev = (void *) data->hdev;
+				skb->pkt_type = HCI_ACLDATA_PKT;
+				hci_recv_frame(skb);
+			}
+			break;
+
+		case HCI_SCODATA_PKT:
+			sh = (struct hci_sco_hdr *) buf;
+			len = HCI_SCO_HDR_SIZE + sh->dlen;
+			skb = bt_skb_alloc(len, GFP_ATOMIC);
+			if (skb) {
+				memcpy(skb_put(skb, len), buf, len);
+				skb->dev = (void *) data->hdev;
+				skb->pkt_type = HCI_SCODATA_PKT;
+				hci_recv_frame(skb);
+			}
+			break;
+
+		case HCI_VENDOR_PKT:
+			vh = (struct hci_vendor_hdr *) buf;
+			len = HCI_VENDOR_HDR_SIZE + __le16_to_cpu(vh->dlen);
+			skb = bt_skb_alloc(len, GFP_ATOMIC);
+			if (skb) {
+				memcpy(skb_put(skb, len), buf, len);
+				skb->dev = (void *) data->hdev;
+				skb->pkt_type = HCI_VENDOR_PKT;
+				hci_recv_frame(skb);
+			}
+			break;
+
+		default:
+			len = count - 1;
+			break;
+		}
+
+		buf   += len;
+		count -= (len + 1);
+	}
+}
+
+static int bpa10x_recv_event(struct bpa10x_data *data, unsigned char *buf, int size)
+{
+	BT_DBG("data %p buf %p size %d", data, buf, size);
+
+	if (data->evt_skb) {
+		struct sk_buff *skb = data->evt_skb;
+
+		memcpy(skb_put(skb, size), buf, size);
+
+		if (skb->len == data->evt_len) {
+			data->evt_skb = NULL;
+			data->evt_len = 0;
+			hci_recv_frame(skb);
+		}
+	} else {
+		struct sk_buff *skb;
+		struct hci_event_hdr *hdr;
+		unsigned char pkt_type;
+		int pkt_len = 0;
+
+		if (size < HCI_EVENT_HDR_SIZE + 1) {
+			BT_ERR("%s event packet block with size %d is too short",
+							data->hdev->name, size);
+			return -EILSEQ;
+		}
+
+		pkt_type = *buf++;
+		size--;
+
+		if (pkt_type != HCI_EVENT_PKT) {
+			BT_ERR("%s unexpected event packet start byte 0x%02x",
+							data->hdev->name, pkt_type);
+			return -EPROTO;
+		}
+
+		hdr = (struct hci_event_hdr *) buf;
+		pkt_len = HCI_EVENT_HDR_SIZE + hdr->plen;
+
+		skb = bt_skb_alloc(pkt_len, GFP_ATOMIC);
+		if (!skb) {
+			BT_ERR("%s no memory for new event packet",
+							data->hdev->name);
+			return -ENOMEM;
+		}
+
+		skb->dev = (void *) data->hdev;
+		skb->pkt_type = pkt_type;
+
+		memcpy(skb_put(skb, size), buf, size);
+
+		if (pkt_len == size) {
+			hci_recv_frame(skb);
+		} else {
+			data->evt_skb = skb;
+			data->evt_len = pkt_len;
+		}
+	}
+
+	return 0;
+}
+
+static void bpa10x_wakeup(struct bpa10x_data *data)
+{
+	struct urb *urb;
+	struct sk_buff *skb;
+	int err;
+
+	BT_DBG("data %p", data);
+
+	urb = data->cmd_urb;
+	if (urb->status == -EINPROGRESS)
+		skb = NULL;
+	else
+		skb = skb_dequeue(&data->cmd_queue);
+
+	if (skb) {
+		struct usb_ctrlrequest *cr;
+
+		if (skb->len > BPA10X_CMD_BUF_SIZE) {
+			BT_ERR("%s command packet with size %d is too big",
+							data->hdev->name, skb->len);
+			kfree_skb(skb);
+			return;
+		}
+
+		cr = (struct usb_ctrlrequest *) urb->setup_packet;
+		cr->wLength = __cpu_to_le16(skb->len);
+
+		memcpy(urb->transfer_buffer, skb->data, skb->len);
+		urb->transfer_buffer_length = skb->len;
+
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err < 0 && err != -ENODEV) {
+			BT_ERR("%s submit failed for command urb %p with error %d",
+							data->hdev->name, urb, err);
+			skb_queue_head(&data->cmd_queue, skb);
+		} else
+			kfree_skb(skb);
+	}
+
+	urb = data->tx_urb;
+	if (urb->status == -EINPROGRESS)
+		skb = NULL;
+	else
+		skb = skb_dequeue(&data->tx_queue);
+
+	if (skb) {
+		memcpy(urb->transfer_buffer, skb->data, skb->len);
+		urb->transfer_buffer_length = skb->len;
+
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err < 0 && err != -ENODEV) {
+			BT_ERR("%s submit failed for command urb %p with error %d",
+							data->hdev->name, urb, err);
+			skb_queue_head(&data->tx_queue, skb);
+		} else
+			kfree_skb(skb);
+	}
+}
+
+static void bpa10x_complete(struct urb *urb, struct pt_regs *regs)
+{
+	struct bpa10x_data *data = urb->context;
+	unsigned char *buf = urb->transfer_buffer;
+	int err, count = urb->actual_length;
+
+	BT_DBG("data %p urb %p buf %p count %d", data, urb, buf, count);
+
+	read_lock(&data->lock);
+
+	if (!test_bit(HCI_RUNNING, &data->hdev->flags))
+		goto unlock;
+
+	if (urb->status < 0 || !count)
+		goto resubmit;
+
+	if (usb_pipein(urb->pipe)) {
+		data->hdev->stat.byte_rx += count;
+
+		if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)
+			bpa10x_recv_event(data, buf, count);
+
+		if (usb_pipetype(urb->pipe) == PIPE_BULK)
+			bpa10x_recv_bulk(data, buf, count);
+	} else {
+		data->hdev->stat.byte_tx += count;
+
+		bpa10x_wakeup(data);
+	}
+
+resubmit:
+	if (usb_pipein(urb->pipe)) {
+		err = usb_submit_urb(urb, GFP_ATOMIC);
+		if (err < 0 && err != -ENODEV) {
+			BT_ERR("%s urb %p type %d resubmit status %d",
+				data->hdev->name, urb, usb_pipetype(urb->pipe), err);
+		}
+	}
+
+unlock:
+	read_unlock(&data->lock);
+}
+
+static inline struct urb *bpa10x_alloc_urb(struct usb_device *udev, unsigned int pipe, size_t size, int flags, void *data)
+{
+	struct urb *urb;
+	struct usb_ctrlrequest *cr;
+	unsigned char *buf;
+
+	BT_DBG("udev %p data %p", udev, data);
+
+	urb = usb_alloc_urb(0, flags);
+	if (!urb)
+		return NULL;
+
+	buf = kmalloc(size, flags);
+	if (!buf) {
+		usb_free_urb(urb);
+		return NULL;
+	}
+
+	switch (usb_pipetype(pipe)) {
+	case PIPE_CONTROL:
+		cr = kmalloc(sizeof(*cr), flags);
+		if (!cr) {
+			kfree(buf);
+			usb_free_urb(urb);
+			return NULL;
+		}
+
+		cr->bRequestType = USB_TYPE_VENDOR;
+		cr->bRequest     = 0;
+		cr->wIndex       = 0;
+		cr->wValue       = 0;
+		cr->wLength      = __cpu_to_le16(0);
+
+		usb_fill_control_urb(urb, udev, pipe, (void *) cr, buf, 0, bpa10x_complete, data);
+		break;
+
+	case PIPE_INTERRUPT:
+		usb_fill_int_urb(urb, udev, pipe, buf, size, bpa10x_complete, data, 1);
+		break;
+
+	case PIPE_BULK:
+		usb_fill_bulk_urb(urb, udev, pipe, buf, size, bpa10x_complete, data);
+		break;
+
+	default:
+		kfree(buf);
+		usb_free_urb(urb);
+		return NULL;
+	}
+
+	return urb;
+}
+
+static inline void bpa10x_free_urb(struct urb *urb)
+{
+	BT_DBG("urb %p", urb);
+
+	if (!urb)
+		return;
+
+	if (urb->setup_packet)
+		kfree(urb->setup_packet);
+
+	if (urb->transfer_buffer)
+		kfree(urb->transfer_buffer);
+
+	usb_free_urb(urb);
+}
+
+static int bpa10x_open(struct hci_dev *hdev)
+{
+	struct bpa10x_data *data = hdev->driver_data;
+	struct usb_device *udev = data->udev;
+	unsigned long flags;
+	int err;
+
+	BT_DBG("hdev %p data %p", hdev, data);
+
+	if (test_and_set_bit(HCI_RUNNING, &hdev->flags))
+		return 0;
+
+	data->cmd_urb = bpa10x_alloc_urb(udev, usb_sndctrlpipe(udev, BPA10X_CMD_EP),
+					BPA10X_CMD_BUF_SIZE, GFP_KERNEL, data);
+	if (!data->cmd_urb) {
+		err = -ENOMEM;
+		goto done;
+	}
+
+	data->evt_urb = bpa10x_alloc_urb(udev, usb_rcvintpipe(udev, BPA10X_EVT_EP),
+					BPA10X_EVT_BUF_SIZE, GFP_KERNEL, data);
+	if (!data->evt_urb) {
+		bpa10x_free_urb(data->cmd_urb);
+		err = -ENOMEM;
+		goto done;
+	}
+
+	data->rx_urb = bpa10x_alloc_urb(udev, usb_rcvbulkpipe(udev, BPA10X_RX_EP),
+					BPA10X_RX_BUF_SIZE, GFP_KERNEL, data);
+	if (!data->rx_urb) {
+		bpa10x_free_urb(data->evt_urb);
+		bpa10x_free_urb(data->cmd_urb);
+		err = -ENOMEM;
+		goto done;
+	}
+
+	data->tx_urb = bpa10x_alloc_urb(udev, usb_sndbulkpipe(udev, BPA10X_TX_EP),
+					BPA10X_TX_BUF_SIZE, GFP_KERNEL, data);
+	if (!data->rx_urb) {
+		bpa10x_free_urb(data->rx_urb);
+		bpa10x_free_urb(data->evt_urb);
+		bpa10x_free_urb(data->cmd_urb);
+		err = -ENOMEM;
+		goto done;
+	}
+
+	write_lock_irqsave(&data->lock, flags);
+
+	err = usb_submit_urb(data->evt_urb, GFP_ATOMIC);
+	if (err < 0) {
+		BT_ERR("%s submit failed for event urb %p with error %d",
+					data->hdev->name, data->evt_urb, err);
+	} else {
+		err = usb_submit_urb(data->rx_urb, GFP_ATOMIC);
+		if (err < 0) {
+			BT_ERR("%s submit failed for rx urb %p with error %d",
+					data->hdev->name, data->evt_urb, err);
+			usb_kill_urb(data->evt_urb);
+		}
+	}
+
+	write_unlock_irqrestore(&data->lock, flags);
+
+done:
+	if (err < 0)
+		clear_bit(HCI_RUNNING, &hdev->flags);
+
+	return err;
+}
+
+static int bpa10x_close(struct hci_dev *hdev)
+{
+	struct bpa10x_data *data = hdev->driver_data;
+	unsigned long flags;
+
+	BT_DBG("hdev %p data %p", hdev, data);
+
+	if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
+		return 0;
+
+	write_lock_irqsave(&data->lock, flags);
+
+	skb_queue_purge(&data->cmd_queue);
+	usb_kill_urb(data->cmd_urb);
+	usb_kill_urb(data->evt_urb);
+	usb_kill_urb(data->rx_urb);
+	usb_kill_urb(data->tx_urb);
+
+	write_unlock_irqrestore(&data->lock, flags);
+
+	bpa10x_free_urb(data->cmd_urb);
+	bpa10x_free_urb(data->evt_urb);
+	bpa10x_free_urb(data->rx_urb);
+	bpa10x_free_urb(data->tx_urb);
+
+	return 0;
+}
+
+static int bpa10x_flush(struct hci_dev *hdev)
+{
+	struct bpa10x_data *data = hdev->driver_data;
+
+	BT_DBG("hdev %p data %p", hdev, data);
+
+	skb_queue_purge(&data->cmd_queue);
+
+	return 0;
+}
+
+static int bpa10x_send_frame(struct sk_buff *skb)
+{
+	struct hci_dev *hdev = (struct hci_dev *) skb->dev;
+	struct bpa10x_data *data;
+
+	BT_DBG("hdev %p skb %p type %d len %d", hdev, skb, skb->pkt_type, skb->len);
+
+	if (!hdev) {
+		BT_ERR("Frame for unknown HCI device");
+		return -ENODEV;
+	}
+
+	if (!test_bit(HCI_RUNNING, &hdev->flags))
+		return -EBUSY;
+
+	data = hdev->driver_data;
+
+	/* Prepend skb with frame type */
+	memcpy(skb_push(skb, 1), &(skb->pkt_type), 1);
+
+	switch (skb->pkt_type) {
+	case HCI_COMMAND_PKT:
+		hdev->stat.cmd_tx++;
+		skb_queue_tail(&data->cmd_queue, skb);
+		break;
+
+	case HCI_ACLDATA_PKT:
+		hdev->stat.acl_tx++;
+		skb_queue_tail(&data->tx_queue, skb);
+		break;
+
+	case HCI_SCODATA_PKT:
+		hdev->stat.sco_tx++;
+		skb_queue_tail(&data->tx_queue, skb);
+		break;
+	};
+
+	read_lock(&data->lock);
+
+	bpa10x_wakeup(data);
+
+	read_unlock(&data->lock);
+
+	return 0;
+}
+
+static void bpa10x_destruct(struct hci_dev *hdev)
+{
+	struct bpa10x_data *data = hdev->driver_data;
+
+	BT_DBG("hdev %p data %p", hdev, data);
+
+	kfree(data);
+}
+
+static int bpa10x_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct hci_dev *hdev;
+	struct bpa10x_data *data;
+	int err;
+
+	BT_DBG("intf %p id %p", intf, id);
+
+	if (ignore)
+		return -ENODEV;
+
+	data = kmalloc(sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		BT_ERR("Can't allocate data structure");
+		return -ENOMEM;
+	}
+
+	memset(data, 0, sizeof(*data));
+
+	data->udev = udev;
+
+	rwlock_init(&data->lock);
+
+	skb_queue_head_init(&data->cmd_queue);
+	skb_queue_head_init(&data->tx_queue);
+
+	hdev = hci_alloc_dev();
+	if (!hdev) {
+		BT_ERR("Can't allocate HCI device");
+		kfree(data);
+		return -ENOMEM;
+	}
+
+	data->hdev = hdev;
+
+	hdev->type = HCI_USB;
+	hdev->driver_data = data;
+	SET_HCIDEV_DEV(hdev, &intf->dev);
+
+	hdev->open	= bpa10x_open;
+	hdev->close	= bpa10x_close;
+	hdev->flush	= bpa10x_flush;
+	hdev->send	= bpa10x_send_frame;
+	hdev->destruct	= bpa10x_destruct;
+
+	hdev->owner = THIS_MODULE;
+
+	err = hci_register_dev(hdev);
+	if (err < 0) {
+		BT_ERR("Can't register HCI device");
+		kfree(data);
+		hci_free_dev(hdev);
+		return err;
+	}
+
+	usb_set_intfdata(intf, data);
+
+	return 0;
+}
+
+static void bpa10x_disconnect(struct usb_interface *intf)
+{
+	struct bpa10x_data *data = usb_get_intfdata(intf);
+	struct hci_dev *hdev = data->hdev;
+
+	BT_DBG("intf %p", intf);
+
+	if (!hdev)
+		return;
+
+	usb_set_intfdata(intf, NULL);
+
+	if (hci_unregister_dev(hdev) < 0)
+		BT_ERR("Can't unregister HCI device %s", hdev->name);
+
+	hci_free_dev(hdev);
+}
+
+static struct usb_driver bpa10x_driver = {
+	.owner		= THIS_MODULE,
+	.name		= "bpa10x",
+	.probe		= bpa10x_probe,
+	.disconnect	= bpa10x_disconnect,
+	.id_table	= bpa10x_table,
+};
+
+static int __init bpa10x_init(void)
+{
+	int err;
+
+	BT_INFO("Digianswer Bluetooth USB driver ver %s", VERSION);
+
+	err = usb_register(&bpa10x_driver);
+	if (err < 0)
+		BT_ERR("Failed to register USB driver");
+
+	return err;
+}
+
+static void __exit bpa10x_exit(void)
+{
+	usb_deregister(&bpa10x_driver);
+}
+
+module_init(bpa10x_init);
+module_exit(bpa10x_exit);
+
+module_param(ignore, bool, 0644);
+MODULE_PARM_DESC(ignore, "Ignore devices from the matching table");
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Digianswer Bluetooth USB driver ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");

drivers/bluetooth/hci_usb.c

@@ -73,7 +73,7 @@ static int reset = 0;
 static int isoc = 2;
 #endif
 
-#define VERSION "2.7"
+#define VERSION "2.8"
 
 static struct usb_driver hci_usb_driver; 
 
@@ -104,11 +104,11 @@ static struct usb_device_id blacklist_ids[] = {
 	{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = HCI_IGNORE },
 
 	/* Broadcom BCM2035 */
-	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = HCI_RESET | HCI_BROKEN_ISOC },
 	{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = HCI_RESET | HCI_BROKEN_ISOC },
+	{ USB_DEVICE(0x0a5c, 0x2009), .driver_info = HCI_BCM92035 },
 
 	/* Microsoft Wireless Transceiver for Bluetooth 2.0 */
-	{ USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_RESET | HCI_BROKEN_ISOC },
+	{ USB_DEVICE(0x045e, 0x009c), .driver_info = HCI_BCM92035 },
 
 	/* ISSC Bluetooth Adapter v3.1 */
 	{ USB_DEVICE(0x1131, 0x1001), .driver_info = HCI_RESET },
@@ -977,6 +977,17 @@ static int hci_usb_probe(struct usb_interface *intf, const struct usb_device_id
 			set_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks);
 	}
 
+	if (id->driver_info & HCI_BCM92035) {
+		unsigned char cmd[] = { 0x3b, 0xfc, 0x01, 0x00 };
+		struct sk_buff *skb;
+
+		skb = bt_skb_alloc(sizeof(cmd), GFP_KERNEL);
+		if (skb) {
+			memcpy(skb_put(skb, sizeof(cmd)), cmd, sizeof(cmd));
+			skb_queue_tail(&hdev->driver_init, skb);
+		}
+	}
+
 	if (hci_register_dev(hdev) < 0) {
 		BT_ERR("Can't register HCI device");
 		hci_free_dev(hdev);

drivers/bluetooth/hci_usb.h

@@ -33,6 +33,7 @@
 #define HCI_DIGIANSWER		0x04
 #define HCI_SNIFFER		0x08
 #define HCI_BROKEN_ISOC		0x10
+#define HCI_BCM92035		0x20
 
 #define HCI_MAX_IFACE_NUM	3
 

include/asm-sparc64/spinlock.h

@@ -171,12 +171,13 @@ static void inline __read_unlock(rwlock_t *lock)
 	unsigned long tmp1, tmp2;
 
 	__asm__ __volatile__(
+"	membar	#StoreLoad | #LoadLoad\n"
 "1:	lduw	[%2], %0\n"
 "	sub	%0, 1, %1\n"
 "	cas	[%2], %0, %1\n"
 "	cmp	%0, %1\n"
 "	bne,pn	%%xcc, 1b\n"
-"	 membar	#StoreLoad | #StoreStore"
+"	 nop"
 	: "=&r" (tmp1), "=&r" (tmp2)
 	: "r" (lock)
 	: "memory");

include/asm-sparc64/system.h

@@ -229,6 +229,7 @@ do {	if (test_thread_flag(TIF_PERFCTR)) {				\
 static __inline__ unsigned long xchg32(__volatile__ unsigned int *m, unsigned int val)
 {
 	__asm__ __volatile__(
+"	membar		#StoreLoad | #LoadLoad\n"
 "	mov		%0, %%g5\n"
 "1:	lduw		[%2], %%g7\n"
 "	cas		[%2], %%g7, %0\n"
@@ -245,6 +246,7 @@ static __inline__ unsigned long xchg32(__volatile__ unsigned int *m, unsigned in
 static __inline__ unsigned long xchg64(__volatile__ unsigned long *m, unsigned long val)
 {
 	__asm__ __volatile__(
+"	membar		#StoreLoad | #LoadLoad\n"
 "	mov		%0, %%g5\n"
 "1:	ldx		[%2], %%g7\n"
 "	casx		[%2], %%g7, %0\n"
@@ -289,7 +291,8 @@ extern void die_if_kernel(char *str, struct pt_regs *regs) __attribute__ ((noret
 static __inline__ unsigned long
 __cmpxchg_u32(volatile int *m, int old, int new)
 {
-	__asm__ __volatile__("cas [%2], %3, %0\n\t"
+	__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
+			     "cas [%2], %3, %0\n\t"
 			     "membar #StoreLoad | #StoreStore"
 			     : "=&r" (new)
 			     : "0" (new), "r" (m), "r" (old)
@@ -301,7 +304,8 @@ __cmpxchg_u32(volatile int *m, int old, int new)
 static __inline__ unsigned long
 __cmpxchg_u64(volatile long *m, unsigned long old, unsigned long new)
 {
-	__asm__ __volatile__("casx [%2], %3, %0\n\t"
+	__asm__ __volatile__("membar #StoreLoad | #LoadLoad\n"
+			     "casx [%2], %3, %0\n\t"
 			     "membar #StoreLoad | #StoreStore"
 			     : "=&r" (new)
 			     : "0" (new), "r" (m), "r" (old)

include/linux/netfilter_ipv4/ip_conntrack_tcp.h

@@ -41,6 +41,7 @@ struct ip_ct_tcp
 	u_int8_t	retrans;	/* Number of retransmitted packets */
 	u_int8_t	last_index;	/* Index of the last packet */
 	u_int32_t	last_seq;	/* Last sequence number seen in dir */
+	u_int32_t	last_ack;	/* Last sequence number seen in opposite dir */
 	u_int32_t	last_end;	/* Last seq + len */
 };
 

include/linux/netfilter_ipv4/ip_conntrack_tuple.h

@@ -64,10 +64,10 @@ struct ip_conntrack_tuple
 		} u;
 
 		/* The protocol. */
-		u8 protonum;
+		u_int8_t protonum;
 
 		/* The direction (for tuplehash) */
-		u8 dir;
+		u_int8_t dir;
 	} dst;
 };
 

include/linux/netlink.h

@@ -133,10 +133,9 @@ int netlink_sendskb(struct sock *sk, struct sk_buff *skb, int protocol);
 
 /*
  *	skb should fit one page. This choice is good for headerless malloc.
- *
- *      FIXME: What is the best size for SLAB???? --ANK
  */
-#define NLMSG_GOODSIZE (PAGE_SIZE - ((sizeof(struct sk_buff)+0xF)&~0xF))
+#define NLMSG_GOODORDER 0
+#define NLMSG_GOODSIZE (SKB_MAX_ORDER(0, NLMSG_GOODORDER))
 
 
 struct netlink_callback

include/net/bluetooth/hci_core.h

@@ -119,6 +119,8 @@ struct hci_dev {
 
 	struct hci_dev_stats	stat;
 
+	struct sk_buff_head	driver_init;
+
 	void			*driver_data;
 	void			*core_data;
 

net/bluetooth/hci_core.c

@@ -183,10 +183,22 @@ static void hci_reset_req(struct hci_dev *hdev, unsigned long opt)
 
 static void hci_init_req(struct hci_dev *hdev, unsigned long opt)
 {
+	struct sk_buff *skb;
 	__u16 param;
 
 	BT_DBG("%s %ld", hdev->name, opt);
 
+	/* Driver initialization */
+
+	/* Special commands */
+	while ((skb = skb_dequeue(&hdev->driver_init))) {
+		skb->pkt_type = HCI_COMMAND_PKT;
+		skb->dev = (void *) hdev;
+		skb_queue_tail(&hdev->cmd_q, skb);
+		hci_sched_cmd(hdev);
+	}
+	skb_queue_purge(&hdev->driver_init);
+
 	/* Mandatory initialization */
 
 	/* Reset */
@@ -792,6 +804,8 @@ struct hci_dev *hci_alloc_dev(void)
 
 	memset(hdev, 0, sizeof(struct hci_dev));
 
+	skb_queue_head_init(&hdev->driver_init);
+
 	return hdev;
 }
 EXPORT_SYMBOL(hci_alloc_dev);
@@ -799,6 +813,8 @@ EXPORT_SYMBOL(hci_alloc_dev);
 /* Free HCI device */
 void hci_free_dev(struct hci_dev *hdev)
 {
+	skb_queue_purge(&hdev->driver_init);
+
 	/* will free via class release */
 	class_device_put(&hdev->class_dev);
 }

net/ipv4/ipconfig.c

@@ -1232,7 +1232,7 @@ u32 __init root_nfs_parse_addr(char *name)
 		if (*cp == ':')
 			*cp++ = '\0';
 		addr = in_aton(name);
-		strcpy(name, cp);
+		memmove(name, cp, strlen(cp) + 1);
 	} else
 		addr = INADDR_NONE;
 

net/ipv4/netfilter/ip_conntrack_ftp.c

@@ -373,10 +373,9 @@ static int help(struct sk_buff **pskb,
 		goto out_update_nl;
 	}
 
-	DEBUGP("conntrack_ftp: match `%.*s' (%u bytes at %u)\n",
-	       (int)matchlen, data + matchoff,
-	       matchlen, ntohl(th->seq) + matchoff);
-
+	DEBUGP("conntrack_ftp: match `%s' (%u bytes at %u)\n",
+	       fb_ptr + matchoff, matchlen, ntohl(th->seq) + matchoff);
+			 
 	/* Allocate expectation which will be inserted */
 	exp = ip_conntrack_expect_alloc();
 	if (exp == NULL) {

net/ipv4/netfilter/ip_conntrack_proto_tcp.c

@@ -665,11 +665,13 @@ static int tcp_in_window(struct ip_ct_tcp *state,
 		if (*index == TCP_ACK_SET) {
 			if (state->last_dir == dir
 			    && state->last_seq == seq
+			    && state->last_ack == ack
 			    && state->last_end == end)
 				state->retrans++;
 			else {
 				state->last_dir = dir;
 				state->last_seq = seq;
+				state->last_ack = ack;
 				state->last_end = end;
 				state->retrans = 0;
 			}

net/ipv4/netfilter/ip_nat_core.c

@@ -543,6 +543,7 @@ int __init ip_nat_init(void)
 static int clean_nat(struct ip_conntrack *i, void *data)
 {
 	memset(&i->nat, 0, sizeof(i->nat));
+	i->status &= ~(IPS_NAT_MASK | IPS_NAT_DONE_MASK | IPS_SEQ_ADJUST);
 	return 0;
 }
 

net/ipv4/netfilter/ipt_hashlimit.c

@@ -570,7 +570,7 @@ static void *dl_seq_start(struct seq_file *s, loff_t *pos)
 	if (*pos >= htable->cfg.size)
 		return NULL;
 
-	bucket = kmalloc(sizeof(unsigned int), GFP_KERNEL);
+	bucket = kmalloc(sizeof(unsigned int), GFP_ATOMIC);
 	if (!bucket)
 		return ERR_PTR(-ENOMEM);
 

net/ipv6/ip6_tunnel.c

@@ -180,10 +180,10 @@ ip6ip6_tnl_link(struct ip6_tnl *t)
 {
 	struct ip6_tnl **tp = ip6ip6_bucket(&t->parms);
 
-	write_lock_bh(&ip6ip6_lock);
 	t->next = *tp;
-	write_unlock_bh(&ip6ip6_lock);
+	write_lock_bh(&ip6ip6_lock);
 	*tp = t;
+	write_unlock_bh(&ip6ip6_lock);
 }
 
 /**

net/sched/ipt.c

@@ -207,6 +207,11 @@ tcf_ipt(struct sk_buff **pskb, struct tc_action *a)
 	struct tcf_ipt *p = PRIV(a, ipt);
 	struct sk_buff *skb = *pskb;
 
+	if (skb_cloned(skb)) {
+		if (pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
+			return TC_ACT_UNSPEC;
+	}
+
 	spin_lock(&p->lock);
 
 	p->tm.lastuse = jiffies;

net/sched/sch_netem.c

@@ -177,6 +177,7 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch)
 	if (q->loss && q->loss >= get_crandom(&q->loss_cor)) {
 		pr_debug("netem_enqueue: random loss\n");
 		sch->qstats.drops++;
+		kfree_skb(skb);
 		return 0;	/* lie about loss so TCP doesn't know */
 	}