[SCSI] target: Add LIO target core v4.0.0-rc6

LIO target is a full featured in-kernel target framework with the
following feature set:

High-performance, non-blocking, multithreaded architecture with SIMD
support.

Advanced SCSI feature set:

    * Persistent Reservations (PRs)
    * Asymmetric Logical Unit Assignment (ALUA)
    * Protocol and intra-nexus multiplexing, load-balancing and failover (MC/S)
    * Full Error Recovery (ERL=0,1,2)
    * Active/active task migration and session continuation (ERL=2)
    * Thin LUN provisioning (UNMAP and WRITE_SAMExx)

Multiprotocol target plugins

Storage media independence:

    * Virtualization of all storage media; transparent mapping of IO to LUNs
    * No hard limits on number of LUNs per Target; maximum LUN size ~750 TB
    * Backstores: SATA, SAS, SCSI, BluRay, DVD, FLASH, USB, ramdisk, etc.

Standards compliance:

    * Full compliance with IETF (RFC 3720)
    * Full implementation of SPC-4 PRs and ALUA

Significant code cleanups done by Christoph Hellwig.

[jejb: fix up for new block bdev exclusive interface. Minor fixes from
 Randy Dunlap and Dan Carpenter.]
Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

Documentation/target/tcm_mod_builder.txt

+>>>>>>>>>> The TCM v4 fabric module script generator <<<<<<<<<<
+
+Greetings all,
+
+This document is intended to be a mini-HOWTO for using the tcm_mod_builder.py
+script to generate a brand new functional TCM v4 fabric .ko module of your very own,
+that once built can be immediately be loaded to start access the new TCM/ConfigFS
+fabric skeleton, by simply using:
+
+	modprobe $TCM_NEW_MOD
+	mkdir -p /sys/kernel/config/target/$TCM_NEW_MOD
+
+This script will create a new drivers/target/$TCM_NEW_MOD/, and will do the following
+
+	*) Generate new API callers for drivers/target/target_core_fabric_configs.c logic
+	   ->make_nodeacl(), ->drop_nodeacl(), ->make_tpg(), ->drop_tpg()
+	   ->make_wwn(), ->drop_wwn().  These are created into $TCM_NEW_MOD/$TCM_NEW_MOD_configfs.c
+	*) Generate basic infrastructure for loading/unloading LKMs and TCM/ConfigFS fabric module
+	   using a skeleton struct target_core_fabric_ops API template.
+	*) Based on user defined T10 Proto_Ident for the new fabric module being built,
+	   the TransportID / Initiator and Target WWPN related handlers for
+	   SPC-3 persistent reservation are automatically generated in $TCM_NEW_MOD/$TCM_NEW_MOD_fabric.c
+	   using drivers/target/target_core_fabric_lib.c logic.
+	*) NOP API calls for all other Data I/O path and fabric dependent attribute logic
+	   in $TCM_NEW_MOD/$TCM_NEW_MOD_fabric.c
+
+tcm_mod_builder.py depends upon the mandatory '-p $PROTO_IDENT' and '-m
+$FABRIC_MOD_name' parameters, and actually running the script looks like:
+
+target:/mnt/sdb/lio-core-2.6.git/Documentation/target# python tcm_mod_builder.py -p iSCSI -m tcm_nab5000
+tcm_dir: /mnt/sdb/lio-core-2.6.git/Documentation/target/../../
+Set fabric_mod_name: tcm_nab5000
+Set fabric_mod_dir:
+/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000
+Using proto_ident: iSCSI
+Creating fabric_mod_dir:
+/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000
+Writing file:
+/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/tcm_nab5000_base.h
+Using tcm_mod_scan_fabric_ops:
+/mnt/sdb/lio-core-2.6.git/Documentation/target/../../include/target/target_core_fabric_ops.h
+Writing file:
+/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/tcm_nab5000_fabric.c
+Writing file:
+/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/tcm_nab5000_fabric.h
+Writing file:
+/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/tcm_nab5000_configfs.c
+Writing file:
+/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/Kbuild
+Writing file:
+/mnt/sdb/lio-core-2.6.git/Documentation/target/../../drivers/target/tcm_nab5000/Kconfig
+Would you like to add tcm_nab5000to drivers/target/Kbuild..? [yes,no]: yes
+Would you like to add tcm_nab5000to drivers/target/Kconfig..? [yes,no]: yes
+
+At the end of tcm_mod_builder.py. the script will ask to add the following
+line to drivers/target/Kbuild:
+
+	obj-$(CONFIG_TCM_NAB5000)       += tcm_nab5000/
+
+and the same for drivers/target/Kconfig:
+
+	source "drivers/target/tcm_nab5000/Kconfig"
+
+*) Run 'make menuconfig' and select the new CONFIG_TCM_NAB5000 item:
+
+	<M>   TCM_NAB5000 fabric module
+
+*) Build using 'make modules', once completed you will have:
+
+target:/mnt/sdb/lio-core-2.6.git# ls -la drivers/target/tcm_nab5000/
+total 1348
+drwxr-xr-x 2 root root   4096 2010-10-05 03:23 .
+drwxr-xr-x 9 root root   4096 2010-10-05 03:22 ..
+-rw-r--r-- 1 root root    282 2010-10-05 03:22 Kbuild
+-rw-r--r-- 1 root root    171 2010-10-05 03:22 Kconfig
+-rw-r--r-- 1 root root     49 2010-10-05 03:23 modules.order
+-rw-r--r-- 1 root root    738 2010-10-05 03:22 tcm_nab5000_base.h
+-rw-r--r-- 1 root root   9096 2010-10-05 03:22 tcm_nab5000_configfs.c
+-rw-r--r-- 1 root root 191200 2010-10-05 03:23 tcm_nab5000_configfs.o
+-rw-r--r-- 1 root root  40504 2010-10-05 03:23 .tcm_nab5000_configfs.o.cmd
+-rw-r--r-- 1 root root   5414 2010-10-05 03:22 tcm_nab5000_fabric.c
+-rw-r--r-- 1 root root   2016 2010-10-05 03:22 tcm_nab5000_fabric.h
+-rw-r--r-- 1 root root 190932 2010-10-05 03:23 tcm_nab5000_fabric.o
+-rw-r--r-- 1 root root  40713 2010-10-05 03:23 .tcm_nab5000_fabric.o.cmd
+-rw-r--r-- 1 root root 401861 2010-10-05 03:23 tcm_nab5000.ko
+-rw-r--r-- 1 root root    265 2010-10-05 03:23 .tcm_nab5000.ko.cmd
+-rw-r--r-- 1 root root    459 2010-10-05 03:23 tcm_nab5000.mod.c
+-rw-r--r-- 1 root root  23896 2010-10-05 03:23 tcm_nab5000.mod.o
+-rw-r--r-- 1 root root  22655 2010-10-05 03:23 .tcm_nab5000.mod.o.cmd
+-rw-r--r-- 1 root root 379022 2010-10-05 03:23 tcm_nab5000.o
+-rw-r--r-- 1 root root    211 2010-10-05 03:23 .tcm_nab5000.o.cmd
+
+*) Load the new module, create a lun_0 configfs group, and add new TCM Core
+   IBLOCK backstore symlink to port:
+
+target:/mnt/sdb/lio-core-2.6.git# insmod drivers/target/tcm_nab5000.ko
+target:/mnt/sdb/lio-core-2.6.git# mkdir -p /sys/kernel/config/target/nab5000/iqn.foo/tpgt_1/lun/lun_0
+target:/mnt/sdb/lio-core-2.6.git# cd /sys/kernel/config/target/nab5000/iqn.foo/tpgt_1/lun/lun_0/
+target:/sys/kernel/config/target/nab5000/iqn.foo/tpgt_1/lun/lun_0# ln -s /sys/kernel/config/target/core/iblock_0/lvm_test0 nab5000_port
+
+target:/sys/kernel/config/target/nab5000/iqn.foo/tpgt_1/lun/lun_0# cd -
+target:/mnt/sdb/lio-core-2.6.git# tree /sys/kernel/config/target/nab5000/
+/sys/kernel/config/target/nab5000/
+|-- discovery_auth
+|-- iqn.foo
+|   `-- tpgt_1
+|       |-- acls
+|       |-- attrib
+|       |-- lun
+|       |   `-- lun_0
+|       |       |-- alua_tg_pt_gp
+|       |       |-- alua_tg_pt_offline
+|       |       |-- alua_tg_pt_status
+|       |       |-- alua_tg_pt_write_md
+|	|	`-- nab5000_port -> ../../../../../../target/core/iblock_0/lvm_test0
+|       |-- np
+|       `-- param
+`-- version
+
+target:/mnt/sdb/lio-core-2.6.git# lsmod
+Module                  Size  Used by
+tcm_nab5000             3935  4
+iscsi_target_mod      193211  0
+target_core_stgt        8090  0
+target_core_pscsi      11122  1
+target_core_file        9172  2
+target_core_iblock      9280  1
+target_core_mod       228575  31
+tcm_nab5000,iscsi_target_mod,target_core_stgt,target_core_pscsi,target_core_file,target_core_iblock
+libfc                  73681  0
+scsi_debug             56265  0
+scsi_tgt                8666  1 target_core_stgt
+configfs               20644  2 target_core_mod
+
+----------------------------------------------------------------------
+
+Future TODO items:
+
+	*) Add more T10 proto_idents
+	*) Make tcm_mod_dump_fabric_ops() smarter and generate function pointer
+	   defs directly from include/target/target_core_fabric_ops.h:struct target_core_fabric_ops
+	   structure members.
+
+October 5th, 2010
+Nicholas A. Bellinger <nab@linux-iscsi.org>

drivers/Kconfig

@@ -26,6 +26,8 @@ source "drivers/ata/Kconfig"
 
 source "drivers/md/Kconfig"
 
+source "drivers/target/Kconfig"
+
 source "drivers/message/fusion/Kconfig"
 
 source "drivers/firewire/Kconfig"

drivers/Makefile

@@ -46,6 +46,7 @@ obj-y				+= macintosh/
 obj-$(CONFIG_IDE)		+= ide/
 obj-$(CONFIG_SCSI)		+= scsi/
 obj-$(CONFIG_ATA)		+= ata/
+obj-$(CONFIG_TARGET_CORE)	+= target/
 obj-$(CONFIG_MTD)		+= mtd/
 obj-$(CONFIG_SPI)		+= spi/
 obj-y				+= net/

drivers/target/Kconfig

+
+menuconfig TARGET_CORE
+	tristate "Generic Target Core Mod (TCM) and ConfigFS Infrastructure"
+	depends on SCSI && BLOCK
+	select CONFIGFS_FS
+	default n
+	help
+	Say Y or M here to enable the TCM Storage Engine and ConfigFS enabled
+	control path for target_core_mod.  This includes built-in TCM RAMDISK
+	subsystem logic for virtual LUN 0 access
+
+if TARGET_CORE
+
+config TCM_IBLOCK
+	tristate "TCM/IBLOCK Subsystem Plugin for Linux/BLOCK"
+	help
+	Say Y here to enable the TCM/IBLOCK subsystem plugin for non-buffered
+	access to Linux/Block devices using BIO
+
+config TCM_FILEIO
+	tristate "TCM/FILEIO Subsystem Plugin for Linux/VFS"
+	help
+	Say Y here to enable the TCM/FILEIO subsystem plugin for buffered
+	access to Linux/VFS struct file or struct block_device
+
+config TCM_PSCSI
+	tristate "TCM/pSCSI Subsystem Plugin for Linux/SCSI"
+	help
+	Say Y here to enable the TCM/pSCSI subsystem plugin for non-buffered
+	passthrough access to Linux/SCSI device
+
+endif

drivers/target/Makefile

+EXTRA_CFLAGS += -I$(srctree)/drivers/target/ -I$(srctree)/drivers/scsi/
+
+target_core_mod-y		:= target_core_configfs.o \
+				   target_core_device.o \
+				   target_core_fabric_configfs.o \
+				   target_core_fabric_lib.o \
+				   target_core_hba.o \
+				   target_core_pr.o \
+				   target_core_alua.o \
+				   target_core_scdb.o \
+				   target_core_tmr.o \
+				   target_core_tpg.o \
+				   target_core_transport.o \
+				   target_core_cdb.o \
+				   target_core_ua.o \
+				   target_core_rd.o \
+				   target_core_mib.o
+
+obj-$(CONFIG_TARGET_CORE)	+= target_core_mod.o
+
+# Subsystem modules
+obj-$(CONFIG_TCM_IBLOCK)	+= target_core_iblock.o
+obj-$(CONFIG_TCM_FILEIO)	+= target_core_file.o
+obj-$(CONFIG_TCM_PSCSI)		+= target_core_pscsi.o

drivers/target/target_core_alua.h

+#ifndef TARGET_CORE_ALUA_H
+#define TARGET_CORE_ALUA_H
+
+/*
+ * INQUIRY response data, TPGS Field
+ *
+ * from spc4r17 section 6.4.2 Table 135
+ */
+#define TPGS_NO_ALUA				0x00
+#define TPGS_IMPLICT_ALUA			0x10
+#define TPGS_EXPLICT_ALUA			0x20
+
+/*
+ * ASYMMETRIC ACCESS STATE field
+ *
+ * from spc4r17 section 6.27 Table 245
+ */
+#define ALUA_ACCESS_STATE_ACTIVE_OPTMIZED	0x0
+#define ALUA_ACCESS_STATE_ACTIVE_NON_OPTIMIZED	0x1
+#define ALUA_ACCESS_STATE_STANDBY		0x2
+#define ALUA_ACCESS_STATE_UNAVAILABLE		0x3
+#define ALUA_ACCESS_STATE_OFFLINE		0xe
+#define ALUA_ACCESS_STATE_TRANSITION		0xf
+
+/*
+ * REPORT_TARGET_PORT_GROUP STATUS CODE
+ *
+ * from spc4r17 section 6.27 Table 246
+ */
+#define ALUA_STATUS_NONE				0x00
+#define ALUA_STATUS_ALTERED_BY_EXPLICT_STPG		0x01
+#define ALUA_STATUS_ALTERED_BY_IMPLICT_ALUA		0x02
+
+/*
+ * From spc4r17, Table D.1: ASC and ASCQ Assignement
+ */
+#define ASCQ_04H_ALUA_STATE_TRANSITION			0x0a
+#define ASCQ_04H_ALUA_TG_PT_STANDBY			0x0b
+#define ASCQ_04H_ALUA_TG_PT_UNAVAILABLE			0x0c
+#define ASCQ_04H_ALUA_OFFLINE				0x12
+
+/*
+ * Used as the default for Active/NonOptimized delay (in milliseconds)
+ * This can also be changed via configfs on a per target port group basis..
+ */
+#define ALUA_DEFAULT_NONOP_DELAY_MSECS			100
+#define ALUA_MAX_NONOP_DELAY_MSECS			10000 /* 10 seconds */
+/*
+ * Used for implict and explict ALUA transitional delay, that is disabled
+ * by default, and is intended to be used for debugging client side ALUA code.
+ */
+#define ALUA_DEFAULT_TRANS_DELAY_MSECS			0
+#define ALUA_MAX_TRANS_DELAY_MSECS			30000 /* 30 seconds */
+/*
+ * Used by core_alua_update_tpg_primary_metadata() and
+ * core_alua_update_tpg_secondary_metadata()
+ */
+#define ALUA_METADATA_PATH_LEN				512
+/*
+ * Used by core_alua_update_tpg_secondary_metadata()
+ */
+#define ALUA_SECONDARY_METADATA_WWN_LEN			256
+
+extern struct kmem_cache *t10_alua_lu_gp_cache;
+extern struct kmem_cache *t10_alua_lu_gp_mem_cache;
+extern struct kmem_cache *t10_alua_tg_pt_gp_cache;
+extern struct kmem_cache *t10_alua_tg_pt_gp_mem_cache;
+
+extern int core_emulate_report_target_port_groups(struct se_cmd *);
+extern int core_emulate_set_target_port_groups(struct se_cmd *);
+extern int core_alua_check_nonop_delay(struct se_cmd *);
+extern int core_alua_do_port_transition(struct t10_alua_tg_pt_gp *,
+				struct se_device *, struct se_port *,
+				struct se_node_acl *, int, int);
+extern char *core_alua_dump_status(int);
+extern struct t10_alua_lu_gp *core_alua_allocate_lu_gp(const char *, int);
+extern int core_alua_set_lu_gp_id(struct t10_alua_lu_gp *, u16);
+extern void core_alua_free_lu_gp(struct t10_alua_lu_gp *);
+extern void core_alua_free_lu_gp_mem(struct se_device *);
+extern struct t10_alua_lu_gp *core_alua_get_lu_gp_by_name(const char *);
+extern void core_alua_put_lu_gp_from_name(struct t10_alua_lu_gp *);
+extern void __core_alua_attach_lu_gp_mem(struct t10_alua_lu_gp_member *,
+					struct t10_alua_lu_gp *);
+extern void __core_alua_drop_lu_gp_mem(struct t10_alua_lu_gp_member *,
+					struct t10_alua_lu_gp *);
+extern void core_alua_drop_lu_gp_dev(struct se_device *);
+extern struct t10_alua_tg_pt_gp *core_alua_allocate_tg_pt_gp(
+			struct se_subsystem_dev *, const char *, int);
+extern int core_alua_set_tg_pt_gp_id(struct t10_alua_tg_pt_gp *, u16);
+extern struct t10_alua_tg_pt_gp_member *core_alua_allocate_tg_pt_gp_mem(
+					struct se_port *);
+extern void core_alua_free_tg_pt_gp(struct t10_alua_tg_pt_gp *);
+extern void core_alua_free_tg_pt_gp_mem(struct se_port *);
+extern void __core_alua_attach_tg_pt_gp_mem(struct t10_alua_tg_pt_gp_member *,
+					struct t10_alua_tg_pt_gp *);
+extern ssize_t core_alua_show_tg_pt_gp_info(struct se_port *, char *);
+extern ssize_t core_alua_store_tg_pt_gp_info(struct se_port *, const char *,
+						size_t);
+extern ssize_t core_alua_show_access_type(struct t10_alua_tg_pt_gp *, char *);
+extern ssize_t core_alua_store_access_type(struct t10_alua_tg_pt_gp *,
+					const char *, size_t);
+extern ssize_t core_alua_show_nonop_delay_msecs(struct t10_alua_tg_pt_gp *,
+						char *);
+extern ssize_t core_alua_store_nonop_delay_msecs(struct t10_alua_tg_pt_gp *,
+					const char *, size_t);
+extern ssize_t core_alua_show_trans_delay_msecs(struct t10_alua_tg_pt_gp *,
+					char *);
+extern ssize_t core_alua_store_trans_delay_msecs(struct t10_alua_tg_pt_gp *,
+					const char *, size_t);
+extern ssize_t core_alua_show_preferred_bit(struct t10_alua_tg_pt_gp *,
+					char *);
+extern ssize_t core_alua_store_preferred_bit(struct t10_alua_tg_pt_gp *,
+					const char *, size_t);
+extern ssize_t core_alua_show_offline_bit(struct se_lun *, char *);
+extern ssize_t core_alua_store_offline_bit(struct se_lun *, const char *,
+					size_t);
+extern ssize_t core_alua_show_secondary_status(struct se_lun *, char *);
+extern ssize_t core_alua_store_secondary_status(struct se_lun *,
+					const char *, size_t);
+extern ssize_t core_alua_show_secondary_write_metadata(struct se_lun *,
+					char *);
+extern ssize_t core_alua_store_secondary_write_metadata(struct se_lun *,
+					const char *, size_t);
+extern int core_setup_alua(struct se_device *, int);
+
+#endif /* TARGET_CORE_ALUA_H */

drivers/target/target_core_file.h

+#ifndef TARGET_CORE_FILE_H
+#define TARGET_CORE_FILE_H
+
+#define FD_VERSION		"4.0"
+
+#define FD_MAX_DEV_NAME		256
+/* Maximum queuedepth for the FILEIO HBA */
+#define FD_HBA_QUEUE_DEPTH	256
+#define FD_DEVICE_QUEUE_DEPTH	32
+#define FD_MAX_DEVICE_QUEUE_DEPTH 128
+#define FD_BLOCKSIZE		512
+#define FD_MAX_SECTORS		1024
+
+#define RRF_EMULATE_CDB		0x01
+#define RRF_GOT_LBA		0x02
+
+struct fd_request {
+	struct se_task	fd_task;
+	/* SCSI CDB from iSCSI Command PDU */
+	unsigned char	fd_scsi_cdb[TCM_MAX_COMMAND_SIZE];
+	/* FILEIO device */
+	struct fd_dev	*fd_dev;
+} ____cacheline_aligned;
+
+#define FBDF_HAS_PATH		0x01
+#define FBDF_HAS_SIZE		0x02
+#define FDBD_USE_BUFFERED_IO	0x04
+
+struct fd_dev {
+	u32		fbd_flags;
+	unsigned char	fd_dev_name[FD_MAX_DEV_NAME];
+	/* Unique Ramdisk Device ID in Ramdisk HBA */
+	u32		fd_dev_id;
+	/* Number of SG tables in sg_table_array */
+	u32		fd_table_count;
+	u32		fd_queue_depth;
+	u32		fd_block_size;
+	unsigned long long fd_dev_size;
+	struct file	*fd_file;
+	/* FILEIO HBA device is connected to */
+	struct fd_host *fd_host;
+} ____cacheline_aligned;
+
+struct fd_host {
+	u32		fd_host_dev_id_count;
+	/* Unique FILEIO Host ID */
+	u32		fd_host_id;
+} ____cacheline_aligned;
+
+#endif /* TARGET_CORE_FILE_H */

drivers/target/target_core_hba.c

+/*******************************************************************************
+ * Filename:  target_core_hba.c
+ *
+ * This file copntains the iSCSI HBA Transport related functions.
+ *
+ * Copyright (c) 2003, 2004, 2005 PyX Technologies, Inc.
+ * Copyright (c) 2005, 2006, 2007 SBE, Inc.
+ * Copyright (c) 2007-2010 Rising Tide Systems
+ * Copyright (c) 2008-2010 Linux-iSCSI.org
+ *
+ * Nicholas A. Bellinger <nab@kernel.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ ******************************************************************************/
+
+#include <linux/net.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/smp_lock.h>
+#include <linux/in.h>
+#include <net/sock.h>
+#include <net/tcp.h>
+
+#include <target/target_core_base.h>
+#include <target/target_core_device.h>
+#include <target/target_core_device.h>
+#include <target/target_core_tpg.h>
+#include <target/target_core_transport.h>
+
+#include "target_core_hba.h"
+
+static LIST_HEAD(subsystem_list);
+static DEFINE_MUTEX(subsystem_mutex);
+
+int transport_subsystem_register(struct se_subsystem_api *sub_api)
+{
+	struct se_subsystem_api *s;
+
+	INIT_LIST_HEAD(&sub_api->sub_api_list);
+
+	mutex_lock(&subsystem_mutex);
+	list_for_each_entry(s, &subsystem_list, sub_api_list) {
+		if (!(strcmp(s->name, sub_api->name))) {
+			printk(KERN_ERR "%p is already registered with"
+				" duplicate name %s, unable to process"
+				" request\n", s, s->name);
+			mutex_unlock(&subsystem_mutex);
+			return -EEXIST;
+		}
+	}
+	list_add_tail(&sub_api->sub_api_list, &subsystem_list);
+	mutex_unlock(&subsystem_mutex);
+
+	printk(KERN_INFO "TCM: Registered subsystem plugin: %s struct module:"
+			" %p\n", sub_api->name, sub_api->owner);
+	return 0;
+}
+EXPORT_SYMBOL(transport_subsystem_register);
+
+void transport_subsystem_release(struct se_subsystem_api *sub_api)
+{
+	mutex_lock(&subsystem_mutex);
+	list_del(&sub_api->sub_api_list);
+	mutex_unlock(&subsystem_mutex);
+}
+EXPORT_SYMBOL(transport_subsystem_release);
+
+static struct se_subsystem_api *core_get_backend(const char *sub_name)
+{
+	struct se_subsystem_api *s;
+
+	mutex_lock(&subsystem_mutex);
+	list_for_each_entry(s, &subsystem_list, sub_api_list) {
+		if (!strcmp(s->name, sub_name))
+			goto found;
+	}
+	mutex_unlock(&subsystem_mutex);
+	return NULL;
+found:
+	if (s->owner && !try_module_get(s->owner))
+		s = NULL;
+	mutex_unlock(&subsystem_mutex);
+	return s;
+}
+
+struct se_hba *
+core_alloc_hba(const char *plugin_name, u32 plugin_dep_id, u32 hba_flags)
+{
+	struct se_hba *hba;
+	int ret = 0;
+
+	hba = kzalloc(sizeof(*hba), GFP_KERNEL);
+	if (!hba) {
+		printk(KERN_ERR "Unable to allocate struct se_hba\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	INIT_LIST_HEAD(&hba->hba_dev_list);
+	spin_lock_init(&hba->device_lock);
+	spin_lock_init(&hba->hba_queue_lock);
+	mutex_init(&hba->hba_access_mutex);
+
+	hba->hba_index = scsi_get_new_index(SCSI_INST_INDEX);
+	hba->hba_flags |= hba_flags;
+
+	atomic_set(&hba->max_queue_depth, 0);
+	atomic_set(&hba->left_queue_depth, 0);
+
+	hba->transport = core_get_backend(plugin_name);
+	if (!hba->transport) {
+		ret = -EINVAL;
+		goto out_free_hba;
+	}
+
+	ret = hba->transport->attach_hba(hba, plugin_dep_id);
+	if (ret < 0)
+		goto out_module_put;
+
+	spin_lock(&se_global->hba_lock);
+	hba->hba_id = se_global->g_hba_id_counter++;
+	list_add_tail(&hba->hba_list, &se_global->g_hba_list);
+	spin_unlock(&se_global->hba_lock);
+
+	printk(KERN_INFO "CORE_HBA[%d] - Attached HBA to Generic Target"
+			" Core\n", hba->hba_id);
+
+	return hba;
+
+out_module_put:
+	if (hba->transport->owner)
+		module_put(hba->transport->owner);
+	hba->transport = NULL;
+out_free_hba:
+	kfree(hba);
+	return ERR_PTR(ret);
+}
+
+int
+core_delete_hba(struct se_hba *hba)
+{
+	struct se_device *dev, *dev_tmp;
+
+	spin_lock(&hba->device_lock);
+	list_for_each_entry_safe(dev, dev_tmp, &hba->hba_dev_list, dev_list) {
+
+		se_clear_dev_ports(dev);
+		spin_unlock(&hba->device_lock);
+
+		se_release_device_for_hba(dev);
+
+		spin_lock(&hba->device_lock);
+	}
+	spin_unlock(&hba->device_lock);
+
+	hba->transport->detach_hba(hba);
+
+	spin_lock(&se_global->hba_lock);
+	list_del(&hba->hba_list);
+	spin_unlock(&se_global->hba_lock);
+
+	printk(KERN_INFO "CORE_HBA[%d] - Detached HBA from Generic Target"
+			" Core\n", hba->hba_id);
+
+	if (hba->transport->owner)
+		module_put(hba->transport->owner);
+
+	hba->transport = NULL;
+	kfree(hba);
+	return 0;
+}

drivers/target/target_core_hba.h

+#ifndef TARGET_CORE_HBA_H
+#define TARGET_CORE_HBA_H
+
+extern struct se_hba *core_alloc_hba(const char *, u32, u32);
+extern int core_delete_hba(struct se_hba *);
+
+#endif /* TARGET_CORE_HBA_H */

drivers/target/target_core_iblock.h

+#ifndef TARGET_CORE_IBLOCK_H
+#define TARGET_CORE_IBLOCK_H
+
+#define IBLOCK_VERSION		"4.0"
+
+#define IBLOCK_HBA_QUEUE_DEPTH	512
+#define IBLOCK_DEVICE_QUEUE_DEPTH	32
+#define IBLOCK_MAX_DEVICE_QUEUE_DEPTH	128
+#define IBLOCK_MAX_CDBS		16
+#define IBLOCK_LBA_SHIFT	9
+
+struct iblock_req {
+	struct se_task ib_task;
+	unsigned char ib_scsi_cdb[TCM_MAX_COMMAND_SIZE];
+	atomic_t ib_bio_cnt;
+	atomic_t ib_bio_err_cnt;
+	struct bio *ib_bio;
+	struct iblock_dev *ib_dev;
+} ____cacheline_aligned;
+
+#define IBDF_HAS_UDEV_PATH		0x01
+#define IBDF_HAS_FORCE			0x02
+
+struct iblock_dev {
+	unsigned char ibd_udev_path[SE_UDEV_PATH_LEN];
+	int	ibd_force;
+	int	ibd_major;
+	int	ibd_minor;
+	u32	ibd_depth;
+	u32	ibd_flags;
+	struct bio_set	*ibd_bio_set;
+	struct block_device *ibd_bd;
+	struct iblock_hba *ibd_host;
+} ____cacheline_aligned;
+
+struct iblock_hba {
+	int		iblock_host_id;
+} ____cacheline_aligned;
+
+#endif /* TARGET_CORE_IBLOCK_H */

drivers/target/target_core_mib.h

+#ifndef TARGET_CORE_MIB_H
+#define TARGET_CORE_MIB_H
+
+typedef enum {
+	SCSI_INST_INDEX,
+	SCSI_DEVICE_INDEX,
+	SCSI_AUTH_INTR_INDEX,
+	SCSI_INDEX_TYPE_MAX
+} scsi_index_t;
+
+struct scsi_index_table {
+	spinlock_t	lock;
+	u32 		scsi_mib_index[SCSI_INDEX_TYPE_MAX];
+} ____cacheline_aligned;
+
+/* SCSI Port stats */
+struct scsi_port_stats {
+	u64	cmd_pdus;
+	u64	tx_data_octets;
+	u64	rx_data_octets;
+} ____cacheline_aligned;
+
+extern int init_scsi_target_mib(void);
+extern void remove_scsi_target_mib(void);
+extern void init_scsi_index_table(void);
+extern u32 scsi_get_new_index(scsi_index_t);
+
+#endif   /*** TARGET_CORE_MIB_H ***/

drivers/target/target_core_pr.h

+#ifndef TARGET_CORE_PR_H
+#define TARGET_CORE_PR_H
+/*
+ * PERSISTENT_RESERVE_OUT service action codes
+ *
+ * spc4r17 section 6.14.2 Table 171
+ */
+#define PRO_REGISTER				0x00
+#define PRO_RESERVE				0x01
+#define PRO_RELEASE				0x02
+#define PRO_CLEAR				0x03
+#define PRO_PREEMPT				0x04
+#define PRO_PREEMPT_AND_ABORT			0x05
+#define PRO_REGISTER_AND_IGNORE_EXISTING_KEY	0x06
+#define PRO_REGISTER_AND_MOVE			0x07
+/*
+ * PERSISTENT_RESERVE_IN service action codes
+ *
+ * spc4r17 section 6.13.1 Table 159
+ */
+#define PRI_READ_KEYS				0x00
+#define PRI_READ_RESERVATION			0x01
+#define PRI_REPORT_CAPABILITIES			0x02
+#define PRI_READ_FULL_STATUS			0x03
+/*
+ * PERSISTENT_RESERVE_ SCOPE field
+ *
+ * spc4r17 section 6.13.3.3 Table 163
+ */
+#define PR_SCOPE_LU_SCOPE			0x00
+/*
+ * PERSISTENT_RESERVE_* TYPE field
+ *
+ * spc4r17 section 6.13.3.4 Table 164
+ */
+#define PR_TYPE_WRITE_EXCLUSIVE			0x01
+#define PR_TYPE_EXCLUSIVE_ACCESS		0x03
+#define PR_TYPE_WRITE_EXCLUSIVE_REGONLY		0x05
+#define PR_TYPE_EXCLUSIVE_ACCESS_REGONLY	0x06
+#define PR_TYPE_WRITE_EXCLUSIVE_ALLREG		0x07
+#define PR_TYPE_EXCLUSIVE_ACCESS_ALLREG		0x08
+
+#define PR_APTPL_MAX_IPORT_LEN			256
+#define PR_APTPL_MAX_TPORT_LEN			256
+
+extern struct kmem_cache *t10_pr_reg_cache;
+
+extern int core_pr_dump_initiator_port(struct t10_pr_registration *,
+			char *, u32);
+extern int core_scsi2_emulate_crh(struct se_cmd *);
+extern int core_scsi3_alloc_aptpl_registration(
+			struct t10_reservation_template *, u64,
+			unsigned char *, unsigned char *, u32,
+			unsigned char *, u16, u32, int, int, u8);
+extern int core_scsi3_check_aptpl_registration(struct se_device *,
+			struct se_portal_group *, struct se_lun *,
+			struct se_lun_acl *);
+extern void core_scsi3_free_pr_reg_from_nacl(struct se_device *,
+					     struct se_node_acl *);
+extern void core_scsi3_free_all_registrations(struct se_device *);
+extern unsigned char *core_scsi3_pr_dump_type(int);
+extern int core_scsi3_check_cdb_abort_and_preempt(struct list_head *,
+						  struct se_cmd *);
+extern int core_scsi3_emulate_pr(struct se_cmd *);
+extern int core_setup_reservations(struct se_device *, int);
+
+#endif /* TARGET_CORE_PR_H */

drivers/target/target_core_pscsi.h

+#ifndef TARGET_CORE_PSCSI_H
+#define TARGET_CORE_PSCSI_H
+
+#define PSCSI_VERSION		"v4.0"
+#define PSCSI_VIRTUAL_HBA_DEPTH	2048
+
+/* used in pscsi_find_alloc_len() */
+#ifndef INQUIRY_DATA_SIZE
+#define INQUIRY_DATA_SIZE	0x24
+#endif
+
+/* used in pscsi_add_device_to_list() */
+#define PSCSI_DEFAULT_QUEUEDEPTH	1
+
+#define PS_RETRY		5
+#define PS_TIMEOUT_DISK		(15*HZ)
+#define PS_TIMEOUT_OTHER	(500*HZ)
+
+#include <linux/device.h>
+#include <scsi/scsi_driver.h>
+#include <scsi/scsi_device.h>
+#include <linux/kref.h>
+#include <linux/kobject.h>
+
+struct pscsi_plugin_task {
+	struct se_task pscsi_task;
+	unsigned char *pscsi_cdb;
+	unsigned char __pscsi_cdb[TCM_MAX_COMMAND_SIZE];
+	unsigned char pscsi_sense[SCSI_SENSE_BUFFERSIZE];
+	int	pscsi_direction;
+	int	pscsi_result;
+	u32	pscsi_resid;
+	struct request *pscsi_req;
+} ____cacheline_aligned;
+
+#define PDF_HAS_CHANNEL_ID	0x01
+#define PDF_HAS_TARGET_ID	0x02
+#define PDF_HAS_LUN_ID		0x04
+#define PDF_HAS_VPD_UNIT_SERIAL 0x08
+#define PDF_HAS_VPD_DEV_IDENT	0x10
+#define PDF_HAS_VIRT_HOST_ID	0x20
+
+struct pscsi_dev_virt {
+	int	pdv_flags;
+	int	pdv_host_id;
+	int	pdv_channel_id;
+	int	pdv_target_id;
+	int	pdv_lun_id;
+	struct block_device *pdv_bd;
+	struct scsi_device *pdv_sd;
+	struct se_hba *pdv_se_hba;
+} ____cacheline_aligned;
+
+typedef enum phv_modes {
+	PHV_VIRUTAL_HOST_ID,
+	PHV_LLD_SCSI_HOST_NO
+} phv_modes_t;
+
+struct pscsi_hba_virt {
+	int			phv_host_id;
+	phv_modes_t		phv_mode;
+	struct Scsi_Host	*phv_lld_host;
+} ____cacheline_aligned;
+
+#endif   /*** TARGET_CORE_PSCSI_H ***/