Commit c6e53daf authored by Thomas Genty's avatar Thomas Genty Committed by Mauro Carvalho Chehab

V4L/DVB (4806): Saa7134: add support for Hauppauge WinTV-HVR1110 DVB-T/Hybrid

This patch adds support for the Hauppauge WinTV-HVR1110 DVB-T/Hybrid
Signed-off-by: default avatarThomas Genty <tomlohave@gmail.com>
Signed-off-by: default avatarMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 8637a875
......@@ -102,3 +102,4 @@
101 -> Pinnacle PCTV 310i [11bd:002f]
102 -> Avermedia AVerTV Studio 507 [1461:9715]
103 -> Compro Videomate DVB-T200A
104 -> Hauppauge WinTV-HVR1110 DVB-T/Hybrid [0070:6701]
......@@ -3126,6 +3126,28 @@ struct saa7134_board saa7134_boards[] = {
.amux = LINE2,
}},
},
[SAA7134_BOARD_HAUPPAUGE_HVR1110] = {
/* Thomas Genty <tomlohave@gmail.com> */
.name = "Hauppauge WinTV-HVR1110 DVB-T/Hybrid",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_PHILIPS_TDA8290,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.mpeg = SAA7134_MPEG_DVB,
.gpiomask = 0x000200000,
.inputs = {{
.name = name_tv,
.vmux = 1,
.amux = TV,
.tv = 1,
}},
.radio = {
.name = name_radio,
.amux = TV,
.gpio = 0x0200000,
},
},
};
const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
......@@ -3752,6 +3774,12 @@ struct pci_device_id saa7134_pci_tbl[] = {
.subvendor = 0x1043,
.subdevice = 0x4876,
.driver_data = SAA7134_BOARD_ASUSTeK_P7131_DUAL,
},{
.vendor = PCI_VENDOR_ID_PHILIPS,
.device = PCI_DEVICE_ID_PHILIPS_SAA7133,
.subvendor = 0x0070,
.subdevice = 0x6701,
.driver_data = SAA7134_BOARD_HAUPPAUGE_HVR1110,
},{
/* --- boards without eeprom + subsystem ID --- */
.vendor = PCI_VENDOR_ID_PHILIPS,
......@@ -4053,6 +4081,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
case SAA7134_BOARD_TEVION_DVBT_220RF:
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
/* this is a hybrid board, initialize to analog mode
* and configure firmware eeprom address
*/
......
......@@ -900,6 +900,18 @@ static struct tda1004x_config pinnacle_pctv_310i_config = {
/* ------------------------------------------------------------------ */
static struct tda1004x_config hauppauge_hvr_1110_config = {
.demod_address = 0x08,
.invert = 1,
.invert_oclk = 0,
.xtal_freq = TDA10046_XTAL_16M,
.agc_config = TDA10046_AGC_TDA827X,
.if_freq = TDA10046_FREQ_045,
.request_firmware = philips_tda1004x_request_firmware,
};
/* ------------------------------------------------------------------ */
static struct tda1004x_config asus_p7131_dual_config = {
.demod_address = 0x08,
.invert = 1,
......@@ -1221,6 +1233,17 @@ static int dvb_init(struct saa7134_dev *dev)
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
}
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
dev->dvb.frontend = dvb_attach(tda10046_attach,
&hauppauge_hvr_1110_config,
&dev->i2c_adap);
if (dev->dvb.frontend) {
dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
dev->dvb.frontend->ops.tuner_ops.init = philips_tiger_tuner_init;
dev->dvb.frontend->ops.tuner_ops.sleep = philips_tiger_tuner_sleep;
dev->dvb.frontend->ops.tuner_ops.set_params = philips_tiger_tuner_set_params;
}
break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
dev->dvb.frontend = dvb_attach(tda10046_attach,
&asus_p7131_dual_config,
......
......@@ -230,6 +230,7 @@ struct saa7134_format {
#define SAA7134_BOARD_PINNACLE_PCTV_310i 101
#define SAA7134_BOARD_AVERMEDIA_STUDIO_507 102
#define SAA7134_BOARD_VIDEOMATE_DVBT_200A 103
#define SAA7134_BOARD_HAUPPAUGE_HVR1110 104
#define SAA7134_MAXBOARDS 8
#define SAA7134_INPUT_MAX 8
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment