Merge branch 'drm-rockchip-next-2016-01-06' of...

Merge branch 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip into drm-next

new rockchip bits.

* 'drm-rockchip-next-2016-01-06' of https://github.com/markyzq/kernel-drm-rockchip:
  drm: rockchip: Support Synopsys DW MIPI DSI
  Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
  drm/rockchip: return a true clock rate to adjusted_mode

Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt

+Rockchip specific extensions to the Synopsys Designware MIPI DSI
+================================
+
+Required properties:
+- #address-cells: Should be <1>.
+- #size-cells: Should be <0>.
+- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
+- reg: Represent the physical address range of the controller.
+- interrupts: Represent the controller's interrupt to the CPU(s).
+- clocks, clock-names: Phandles to the controller's pll reference
+  clock(ref) and APB clock(pclk), as described in [1].
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- ports: contain a port node with endpoint definitions as defined in [2].
+  For vopb,set the reg = <0> and set the reg = <1> for vopl.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+	mipi_dsi: mipi@ff960000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0xff960000 0x4000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+		clock-names = "ref", "pclk";
+		rockchip,grf = <&grf>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+
+		panel {
+			compatible ="boe,tv080wum-nl0";
+			reg = <0>;
+
+			enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&lcd_en>;
+			backlight = <&backlight>;
+			status = "okay";
+		};
+	};

drivers/gpu/drm/rockchip/Kconfig

@@ -25,3 +25,13 @@ config ROCKCHIP_DW_HDMI
 	  for the Synopsys DesignWare HDMI driver. If you want to
 	  enable HDMI on RK3288 based SoC, you should selet this
 	  option.
+
+config ROCKCHIP_DW_MIPI_DSI
+	tristate "Rockchip specific extensions for Synopsys DW MIPI DSI"
+	depends on DRM_ROCKCHIP
+	select DRM_MIPI_DSI
+	help
+	 This selects support for Rockchip SoC specific extensions
+	 for the Synopsys DesignWare HDMI driver. If you want to
+	 enable MIPI DSI on RK3288 based SoC, you should selet this
+	 option.

drivers/gpu/drm/rockchip/Makefile

@@ -6,6 +6,7 @@ rockchipdrm-y := rockchip_drm_drv.o rockchip_drm_fb.o rockchip_drm_fbdev.o \
 		rockchip_drm_gem.o
 
 obj-$(CONFIG_ROCKCHIP_DW_HDMI) += dw_hdmi-rockchip.o
+obj-$(CONFIG_ROCKCHIP_DW_MIPI_DSI) += dw-mipi-dsi.o
 
 obj-$(CONFIG_DRM_ROCKCHIP) += rockchipdrm.o rockchip_drm_vop.o \
 				rockchip_vop_reg.o

drivers/gpu/drm/rockchip/rockchip_drm_vop.c

@@ -818,6 +818,9 @@ int rockchip_drm_crtc_mode_config(struct drm_crtc *crtc,
 	case DRM_MODE_CONNECTOR_HDMIA:
 		VOP_CTRL_SET(vop, hdmi_en, 1);
 		break;
+	case DRM_MODE_CONNECTOR_DSI:
+		VOP_CTRL_SET(vop, mipi_en, 1);
+		break;
 	default:
 		DRM_ERROR("unsupport connector_type[%d]\n", connector_type);
 		return -EINVAL;
@@ -878,9 +881,14 @@ static bool vop_crtc_mode_fixup(struct drm_crtc *crtc,
 				const struct drm_display_mode *mode,
 				struct drm_display_mode *adjusted_mode)
 {
+	struct vop *vop = to_vop(crtc);
+
 	if (adjusted_mode->htotal == 0 || adjusted_mode->vtotal == 0)
 		return false;
 
+	adjusted_mode->clock =
+		clk_round_rate(vop->dclk, mode->clock * 1000) / 1000;
+
 	return true;
 }