Commit c82e4d26 authored by Eugeni Dodonov's avatar Eugeni Dodonov Committed by Daniel Vetter

drm/i915: support DDI training in FDI mode

Starting with Haswell, DDI ports can work in FDI mode to support
connectivity with the outputs located on the PCH.

This commit adds support for such connections in the intel_ddi module, and
provides Haswell-specific functionality to make it work.

v2: simplify the commit as per Daniel Vetter suggestion.
Signed-off-by: default avatarEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 45244b87
...@@ -105,3 +105,118 @@ void intel_prepare_ddi(struct drm_device *dev) ...@@ -105,3 +105,118 @@ void intel_prepare_ddi(struct drm_device *dev)
intel_prepare_ddi_buffers(dev, PORT_E, true); intel_prepare_ddi_buffers(dev, PORT_E, true);
} }
} }
static const long hsw_ddi_buf_ctl_values[] = {
DDI_BUF_EMP_400MV_0DB_HSW,
DDI_BUF_EMP_400MV_3_5DB_HSW,
DDI_BUF_EMP_400MV_6DB_HSW,
DDI_BUF_EMP_400MV_9_5DB_HSW,
DDI_BUF_EMP_600MV_0DB_HSW,
DDI_BUF_EMP_600MV_3_5DB_HSW,
DDI_BUF_EMP_600MV_6DB_HSW,
DDI_BUF_EMP_800MV_0DB_HSW,
DDI_BUF_EMP_800MV_3_5DB_HSW
};
/* Starting with Haswell, different DDI ports can work in FDI mode for
* connection to the PCH-located connectors. For this, it is necessary to train
* both the DDI port and PCH receiver for the desired DDI buffer settings.
*
* The recommended port to work in FDI mode is DDI E, which we use here. Also,
* please note that when FDI mode is active on DDI E, it shares 2 lines with
* DDI A (which is used for eDP)
*/
void hsw_fdi_link_train(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int pipe = intel_crtc->pipe;
u32 reg, temp, i;
/* Configure CPU PLL, wait for warmup */
I915_WRITE(SPLL_CTL,
SPLL_PLL_ENABLE |
SPLL_PLL_FREQ_1350MHz |
SPLL_PLL_SCC);
/* Use SPLL to drive the output when in FDI mode */
I915_WRITE(PORT_CLK_SEL(PORT_E),
PORT_CLK_SEL_SPLL);
I915_WRITE(PIPE_CLK_SEL(pipe),
PIPE_CLK_SEL_PORT(PORT_E));
udelay(20);
/* Start the training iterating through available voltages and emphasis */
for (i=0; i < ARRAY_SIZE(hsw_ddi_buf_ctl_values); i++) {
/* Configure DP_TP_CTL with auto-training */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_LINK_TRAIN_PAT1 |
DP_TP_CTL_ENABLE);
/* Configure and enable DDI_BUF_CTL for DDI E with next voltage */
temp = I915_READ(DDI_BUF_CTL(PORT_E));
temp = (temp & ~DDI_BUF_EMP_MASK);
I915_WRITE(DDI_BUF_CTL(PORT_E),
temp |
DDI_BUF_CTL_ENABLE |
DDI_PORT_WIDTH_X2 |
hsw_ddi_buf_ctl_values[i]);
udelay(600);
/* Enable CPU FDI Receiver with auto-training */
reg = FDI_RX_CTL(pipe);
I915_WRITE(reg,
I915_READ(reg) |
FDI_LINK_TRAIN_AUTO |
FDI_RX_ENABLE |
FDI_LINK_TRAIN_PATTERN_1_CPT |
FDI_RX_ENHANCE_FRAME_ENABLE |
FDI_PORT_WIDTH_2X_LPT |
FDI_RX_PLL_ENABLE);
POSTING_READ(reg);
udelay(100);
temp = I915_READ(DP_TP_STATUS(PORT_E));
if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
DRM_DEBUG_DRIVER("BUF_CTL training done on %d step\n", i);
/* Enable normal pixel sending for FDI */
I915_WRITE(DP_TP_CTL(PORT_E),
DP_TP_CTL_FDI_AUTOTRAIN |
DP_TP_CTL_LINK_TRAIN_NORMAL |
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
DP_TP_CTL_ENABLE);
/* Enable PIPE_DDI_FUNC_CTL for the pipe to work in FDI mode */
temp = I915_READ(DDI_FUNC_CTL(pipe));
temp &= ~PIPE_DDI_PORT_MASK;
temp |= PIPE_DDI_SELECT_PORT(PORT_E) |
PIPE_DDI_MODE_SELECT_FDI |
PIPE_DDI_FUNC_ENABLE |
PIPE_DDI_PORT_WIDTH_X2;
I915_WRITE(DDI_FUNC_CTL(pipe),
temp);
break;
} else {
DRM_ERROR("Error training BUF_CTL %d\n", i);
/* Disable DP_TP_CTL and FDI_RX_CTL) and retry */
I915_WRITE(DP_TP_CTL(PORT_E),
I915_READ(DP_TP_CTL(PORT_E)) &
~DP_TP_CTL_ENABLE);
I915_WRITE(FDI_RX_CTL(pipe),
I915_READ(FDI_RX_CTL(pipe)) &
~FDI_RX_PLL_ENABLE);
continue;
}
}
DRM_DEBUG_KMS("FDI train done.\n");
}
...@@ -6607,6 +6607,8 @@ static void intel_init_display(struct drm_device *dev) ...@@ -6607,6 +6607,8 @@ static void intel_init_display(struct drm_device *dev)
/* FIXME: detect B0+ stepping and use auto training */ /* FIXME: detect B0+ stepping and use auto training */
dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train; dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
dev_priv->display.write_eld = ironlake_write_eld; dev_priv->display.write_eld = ironlake_write_eld;
} else if (IS_HASWELL(dev)) {
dev_priv->display.fdi_link_train = hsw_fdi_link_train;
} else } else
dev_priv->display.update_wm = NULL; dev_priv->display.update_wm = NULL;
} else if (IS_VALLEYVIEW(dev)) { } else if (IS_VALLEYVIEW(dev)) {
......
...@@ -447,6 +447,7 @@ extern void intel_write_eld(struct drm_encoder *encoder, ...@@ -447,6 +447,7 @@ extern void intel_write_eld(struct drm_encoder *encoder,
struct drm_display_mode *mode); struct drm_display_mode *mode);
extern void intel_cpt_verify_modeset(struct drm_device *dev, int pipe); extern void intel_cpt_verify_modeset(struct drm_device *dev, int pipe);
extern void intel_prepare_ddi(struct drm_device *dev); extern void intel_prepare_ddi(struct drm_device *dev);
extern void hsw_fdi_link_train(struct drm_crtc *crtc);
/* For use by IVB LP watermark workaround in intel_sprite.c */ /* For use by IVB LP watermark workaround in intel_sprite.c */
extern void intel_update_watermarks(struct drm_device *dev); extern void intel_update_watermarks(struct drm_device *dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment