Commit c88457eb authored by Vasanthakumar Thiagarajan's avatar Vasanthakumar Thiagarajan Committed by John W. Linville

ath9k_hw: Initialize mode registers for AR9485

Signed-off-by: default avatarVasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 3050c914
......@@ -17,6 +17,7 @@
#include "hw.h"
#include "ar9003_mac.h"
#include "ar9003_2p2_initvals.h"
#include "ar9485_initvals.h"
/* General hardware code for the AR9003 hadware family */
......@@ -39,6 +40,67 @@ static bool ar9003_hw_macversion_supported(u32 macversion)
*/
static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
{
if (AR_SREV_9485(ah)) {
/* mac */
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
ar9485_1_0_mac_core,
ARRAY_SIZE(ar9485_1_0_mac_core), 2);
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_POST],
ar9485_1_0_mac_postamble,
ARRAY_SIZE(ar9485_1_0_mac_postamble), 5);
/* bb */
INIT_INI_ARRAY(&ah->iniBB[ATH_INI_PRE], ar9485_1_0,
ARRAY_SIZE(ar9485_1_0), 2);
INIT_INI_ARRAY(&ah->iniBB[ATH_INI_CORE],
ar9485_1_0_baseband_core,
ARRAY_SIZE(ar9485_1_0_baseband_core), 2);
INIT_INI_ARRAY(&ah->iniBB[ATH_INI_POST],
ar9485_1_0_baseband_postamble,
ARRAY_SIZE(ar9485_1_0_baseband_postamble), 5);
/* radio */
INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_PRE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_CORE],
ar9485_1_0_radio_core,
ARRAY_SIZE(ar9485_1_0_radio_core), 2);
INIT_INI_ARRAY(&ah->iniRadio[ATH_INI_POST],
ar9485_1_0_radio_postamble,
ARRAY_SIZE(ar9485_1_0_radio_postamble), 2);
/* soc */
INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_PRE],
ar9485_1_0_soc_preamble,
ARRAY_SIZE(ar9485_1_0_soc_preamble), 2);
INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_CORE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniSOC[ATH_INI_POST], NULL, 0, 0);
/* rx/tx gain */
INIT_INI_ARRAY(&ah->iniModesRxGain,
ar9485Common_rx_gain_1_0,
ARRAY_SIZE(ar9485Common_rx_gain_1_0), 2);
INIT_INI_ARRAY(&ah->iniModesTxGain,
ar9485Modes_lowest_ob_db_tx_gain_1_0,
ARRAY_SIZE(ar9485Modes_lowest_ob_db_tx_gain_1_0),
5);
/* Load PCIE SERDES settings from INI */
/* Awake Setting */
INIT_INI_ARRAY(&ah->iniPcieSerdes,
ar9485_1_0_pcie_phy_pll_on_clkreq_disable_L1,
ARRAY_SIZE(ar9485_1_0_pcie_phy_pll_on_clkreq_disable_L1),
2);
/* Sleep Setting */
INIT_INI_ARRAY(&ah->iniPcieSerdesLowPower,
ar9485_1_0_pcie_phy_pll_on_clkreq_enable_L1,
ARRAY_SIZE(ar9485_1_0_pcie_phy_pll_on_clkreq_enable_L1),
2);
} else {
/* mac */
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_PRE], NULL, 0, 0);
INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE],
......@@ -105,6 +167,7 @@ static void ar9003_hw_init_mode_regs(struct ath_hw *ah)
ar9300Modes_fast_clock_2p2,
ARRAY_SIZE(ar9300Modes_fast_clock_2p2),
3);
}
}
static void ar9003_tx_gain_table_apply(struct ath_hw *ah)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment