Merge tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

Pull libata updates from Jeff Garzik:
 "Simple stuff.  See one-line summaries."

* tag 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_samsung_cf: use module_platform_driver_probe()
  [libata] Avoid specialized TLA's in ZPODD's Kconfig
  libata-acpi.c: fix copy and paste mistake in ata_acpi_register_power_resource
  sata_fsl: Remove redundant NULL check before kfree
  ahci: Add Device IDs for Intel Wellsburg PCH
  ata_piix: Add MODULE_PARM_DESC to prefer_ms_hyperv

drivers/ata/Kconfig

@@ -59,15 +59,16 @@ config ATA_ACPI
 	  option libata.noacpi=1
 
 config SATA_ZPODD
-	bool "SATA Zero Power ODD Support"
+	bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
 	depends on ATA_ACPI
 	default n
 	help
-	  This option adds support for SATA ZPODD. It requires both
-	  ODD and the platform support, and if enabled, will automatically
-	  power on/off the ODD when certain condition is satisfied. This
-	  does not impact user's experience of the ODD, only power is saved
-	  when ODD is not in use(i.e. no disc inside).
+	  This option adds support for SATA Zero Power Optical Disc
+	  Drive (ZPODD). It requires both the ODD and the platform
+	  support, and if enabled, will automatically power on/off the
+	  ODD when certain condition is satisfied. This does not impact
+	  end user's experience of the ODD, only power is saved when
+	  the ODD is not in use (i.e. no disc inside).
 
 	  If unsure, say N.
 

drivers/ata/ahci.c

@@ -281,6 +281,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x1f37), board_ahci }, /* Avoton RAID */
 	{ PCI_VDEVICE(INTEL, 0x1f3e), board_ahci }, /* Avoton RAID */
 	{ PCI_VDEVICE(INTEL, 0x1f3f), board_ahci }, /* Avoton RAID */
+	{ PCI_VDEVICE(INTEL, 0x2823), board_ahci }, /* Wellsburg RAID */
+	{ PCI_VDEVICE(INTEL, 0x2827), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x8d02), board_ahci }, /* Wellsburg AHCI */
 	{ PCI_VDEVICE(INTEL, 0x8d04), board_ahci }, /* Wellsburg RAID */
 	{ PCI_VDEVICE(INTEL, 0x8d06), board_ahci }, /* Wellsburg RAID */

drivers/ata/ata_piix.c

@@ -1547,6 +1547,10 @@ static bool piix_broken_system_poweroff(struct pci_dev *pdev)
 
 static int prefer_ms_hyperv = 1;
 module_param(prefer_ms_hyperv, int, 0);
+MODULE_PARM_DESC(prefer_ms_hyperv,
+	"Prefer Hyper-V paravirtualization drivers instead of ATA, "
+	"0 - Use ATA drivers, "
+	"1 (Default) - Use the paravirtualization drivers.");
 
 static void piix_ignore_devices_quirk(struct ata_host *host)
 {

drivers/ata/libata-acpi.c

@@ -1027,7 +1027,7 @@ static void ata_acpi_register_power_resource(struct ata_device *dev)
 
 	handle = ata_dev_acpi_handle(dev);
 	if (handle)
-		acpi_dev_pm_remove_dependent(handle, &sdev->sdev_gendev);
+		acpi_dev_pm_add_dependent(handle, &sdev->sdev_gendev);
 }
 
 static void ata_acpi_unregister_power_resource(struct ata_device *dev)

drivers/ata/pata_samsung_cf.c

@@ -661,18 +661,7 @@ static struct platform_driver pata_s3c_driver = {
 	},
 };
 
-static int __init pata_s3c_init(void)
-{
-	return platform_driver_probe(&pata_s3c_driver, pata_s3c_probe);
-}
-
-static void __exit pata_s3c_exit(void)
-{
-	platform_driver_unregister(&pata_s3c_driver);
-}
-
-module_init(pata_s3c_init);
-module_exit(pata_s3c_exit);
+module_platform_driver_probe(pata_s3c_driver, pata_s3c_probe);
 
 MODULE_AUTHOR("Abhilash Kesavan, <a.kesavan@samsung.com>");
 MODULE_DESCRIPTION("low-level driver for Samsung PATA controller");

drivers/ata/sata_fsl.c

@@ -1511,7 +1511,6 @@ static int sata_fsl_probe(struct platform_device *ofdev)
 
 	if (hcr_base)
 		iounmap(hcr_base);
-	if (host_priv)
 	kfree(host_priv);
 
 	return retval;