Merge branch 'rmk-devel-mxc-pu-v2' of...

Merge branch 'rmk-devel-mxc-pu-v2' of git://pasiphae.extern.pengutronix.de/git/imx/linux-2.6 into devel

arch/arm/Makefile

@@ -139,6 +139,7 @@ endif
     plat-$(CONFIG_ARCH_MXC)	   := mxc
  machine-$(CONFIG_ARCH_MX2)	   := mx2
  machine-$(CONFIG_ARCH_MX3)	   := mx3
+ machine-$(CONFIG_ARCH_MX1)	   := mx1
  machine-$(CONFIG_ARCH_ORION5X)	   := orion5x
     plat-$(CONFIG_PLAT_ORION)	   := orion
  machine-$(CONFIG_ARCH_MSM)	   := msm

arch/arm/mach-mx1/Kconfig

+if ARCH_MX1
+
+comment "MX1 Platforms"
+
+config MACH_MXLADS
+	bool
+
+config ARCH_MX1ADS
+	bool "MX1ADS platform"
+	select MACH_MXLADS
+	help
+	  Say Y here if you are using Motorola MX1ADS/MXLADS boards
+
+endif

arch/arm/mach-mx1/Makefile

+#
+# Makefile for the linux kernel.
+#
+
+# Object file lists.
+
+obj-y			+= generic.o clock.o devices.o
+
+# Specific board support
+obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o

arch/arm/mach-mx1/Makefile.boot

+   zreladdr-y	:= 0x08008000
+params_phys-y	:= 0x08000100
+initrd_phys-y	:= 0x08800000
+

arch/arm/mach-mx1/crm_regs.h

+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This file may be distributed under the terms of the GNU General
+ * Public License, version 2.
+ */
+
+#ifndef __ARCH_ARM_MACH_MX1_CRM_REGS_H__
+#define __ARCH_ARM_MACH_MX1_CRM_REGS_H__
+
+#define CCM_BASE	IO_ADDRESS(CCM_BASE_ADDR)
+#define SCM_BASE	IO_ADDRESS(SCM_BASE_ADDR)
+
+/* CCM register addresses */
+#define CCM_CSCR	(CCM_BASE + 0x0)
+#define CCM_MPCTL0	(CCM_BASE + 0x4)
+#define CCM_MPCTL1	(CCM_BASE + 0x8)
+#define CCM_SPCTL0	(CCM_BASE + 0xC)
+#define CCM_SPCTL1	(CCM_BASE + 0x10)
+#define CCM_PCDR	(CCM_BASE + 0x20)
+
+#define CCM_CSCR_CLKO_OFFSET	29
+#define CCM_CSCR_CLKO_MASK	(0x7 << 29)
+#define CCM_CSCR_USB_OFFSET	26
+#define CCM_CSCR_USB_MASK	(0x7 << 26)
+#define CCM_CSCR_SPLL_RESTART	(1 << 22)
+#define CCM_CSCR_MPLL_RESTART	(1 << 21)
+#define CCM_CSCR_OSC_EN_SHIFT	17
+#define CCM_CSCR_SYSTEM_SEL	(1 << 16)
+#define CCM_CSCR_BCLK_OFFSET	10
+#define CCM_CSCR_BCLK_MASK	(0xF << 10)
+#define CCM_CSCR_PRESC		(1 << 15)
+#define CCM_CSCR_SPEN		(1 << 1)
+#define CCM_CSCR_MPEN		(1 << 0)
+
+#define CCM_PCDR_PCLK3_OFFSET	16
+#define CCM_PCDR_PCLK3_MASK	(0x7F << 16)
+#define CCM_PCDR_PCLK2_OFFSET	4
+#define CCM_PCDR_PCLK2_MASK	(0xF << 4)
+#define CCM_PCDR_PCLK1_OFFSET	0
+#define CCM_PCDR_PCLK1_MASK	0xF
+
+/* SCM register addresses */
+#define SCM_SIDR	(SCM_BASE + 0x0)
+#define SCM_FMCR	(SCM_BASE + 0x4)
+#define SCM_GPCR	(SCM_BASE + 0x8)
+#define SCM_GCCR	(SCM_BASE + 0xC)
+
+#define SCM_GCCR_DMA_CLK_EN_OFFSET	3
+#define SCM_GCCR_CSI_CLK_EN_OFFSET	2
+#define SCM_GCCR_MMA_CLK_EN_OFFSET	1
+#define SCM_GCCR_USBD_CLK_EN_OFFSET	0
+
+#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */

arch/arm/mach-mx1/devices.c

+/*
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <mach/hardware.h>
+
+static struct resource imx_csi_resources[] = {
+	[0] = {
+		.start  = 0x00224000,
+		.end    = 0x00224010,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = CSI_INT,
+		.end    = CSI_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 imx_csi_dmamask = 0xffffffffUL;
+
+struct platform_device imx_csi_device = {
+	.name           = "imx-csi",
+	.id             = 0, /* This is used to put cameras on this interface */
+	.dev		= {
+		.dma_mask = &imx_csi_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.resource       = imx_csi_resources,
+	.num_resources  = ARRAY_SIZE(imx_csi_resources),
+};
+
+static struct resource imx_i2c_resources[] = {
+	[0] = {
+		.start  = 0x00217000,
+		.end    = 0x00217010,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = I2C_INT,
+		.end    = I2C_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_i2c_device = {
+	.name           = "imx-i2c",
+	.id             = 0,
+	.resource       = imx_i2c_resources,
+	.num_resources  = ARRAY_SIZE(imx_i2c_resources),
+};
+
+static struct resource imx_uart1_resources[] = {
+	[0] = {
+		.start	= UART1_BASE_ADDR,
+		.end	= UART1_BASE_ADDR + 0xD0,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= UART1_MINT_RX,
+		.end	= UART1_MINT_RX,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= UART1_MINT_TX,
+		.end	= UART1_MINT_TX,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= UART1_MINT_RTS,
+		.end	= UART1_MINT_RTS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_uart1_device = {
+	.name		= "imx-uart",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(imx_uart1_resources),
+	.resource	= imx_uart1_resources,
+};
+
+static struct resource imx_uart2_resources[] = {
+	[0] = {
+		.start	= UART2_BASE_ADDR,
+		.end	= UART2_BASE_ADDR + 0xD0,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= UART2_MINT_RX,
+		.end	= UART2_MINT_RX,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= UART2_MINT_TX,
+		.end	= UART2_MINT_TX,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= UART2_MINT_RTS,
+		.end	= UART2_MINT_RTS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_uart2_device = {
+	.name		= "imx-uart",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(imx_uart2_resources),
+	.resource	= imx_uart2_resources,
+};
+
+static struct resource imx_rtc_resources[] = {
+	[0] = {
+		.start  = 0x00204000,
+		.end    = 0x00204024,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = RTC_INT,
+		.end    = RTC_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start  = RTC_SAMINT,
+		.end    = RTC_SAMINT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_rtc_device = {
+	.name           = "rtc-imx",
+	.id             = 0,
+	.resource       = imx_rtc_resources,
+	.num_resources  = ARRAY_SIZE(imx_rtc_resources),
+};
+
+static struct resource imx_wdt_resources[] = {
+	[0] = {
+		.start  = 0x00201000,
+		.end    = 0x00201008,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = WDT_INT,
+		.end    = WDT_INT,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_wdt_device = {
+	.name           = "imx-wdt",
+	.id             = 0,
+	.resource       = imx_wdt_resources,
+	.num_resources  = ARRAY_SIZE(imx_wdt_resources),
+};
+
+static struct resource imx_usb_resources[] = {
+	[0] = {
+		.start	= 0x00212000,
+		.end	= 0x00212148,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= USBD_INT0,
+		.end	= USBD_INT0,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= USBD_INT1,
+		.end	= USBD_INT1,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= USBD_INT2,
+		.end	= USBD_INT2,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[4] = {
+		.start	= USBD_INT3,
+		.end	= USBD_INT3,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[5] = {
+		.start	= USBD_INT4,
+		.end	= USBD_INT4,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[6] = {
+		.start	= USBD_INT5,
+		.end	= USBD_INT5,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[7] = {
+		.start	= USBD_INT6,
+		.end	= USBD_INT6,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_usb_device = {
+	.name		= "imx_udc",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(imx_usb_resources),
+	.resource	= imx_usb_resources,
+};
+
+/* GPIO port description */
+static struct mxc_gpio_port imx_gpio_ports[] = {
+	[0] = {
+		.chip.label = "gpio-0",
+		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR),
+		.irq = GPIO_INT_PORTA,
+		.virtual_irq_start = MXC_MAX_INT_LINES
+	},
+	[1] = {
+		.chip.label = "gpio-1",
+		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
+		.irq = GPIO_INT_PORTB,
+		.virtual_irq_start = MXC_MAX_INT_LINES + 32
+	},
+	[2] = {
+		.chip.label = "gpio-2",
+		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
+		.irq = GPIO_INT_PORTC,
+		.virtual_irq_start = MXC_MAX_INT_LINES + 64
+	},
+	[3] = {
+		.chip.label = "gpio-3",
+		.base = (void __iomem *)IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
+		.irq = GPIO_INT_PORTD,
+		.virtual_irq_start = MXC_MAX_INT_LINES + 96
+	}
+};
+
+int __init mxc_register_gpios(void)
+{
+	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
+}

arch/arm/mach-mx1/devices.h

+extern struct platform_device imx_csi_device;
+extern struct platform_device imx_i2c_device;
+extern struct platform_device imx_uart1_device;
+extern struct platform_device imx_uart2_device;
+extern struct platform_device imx_rtc_device;
+extern struct platform_device imx_wdt_device;
+extern struct platform_device imx_usb_device;

arch/arm/mach-mx1/generic.c

+/*
+ *  author: Sascha Hauer
+ *  Created: april 20th, 2004
+ *  Copyright: Synertronixx GmbH
+ *
+ *  Common code for i.MX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+
+static struct map_desc imx_io_desc[] __initdata = {
+	{
+		.virtual	= IMX_IO_BASE,
+		.pfn		= __phys_to_pfn(IMX_IO_PHYS),
+		.length		= IMX_IO_SIZE,
+		.type		= MT_DEVICE
+	}
+};
+
+void __init mxc_map_io(void)
+{
+	iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
+}

arch/arm/mach-mx1/mx1ads.c

+/*
+ * arch/arm/mach-imx/mx1ads.c
+ *
+ * Initially based on:
+ *	linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
+ *	Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
+ *
+ * 2004 (c) MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx1-mx2.h>
+#include "devices.h"
+
+/*
+ * UARTs platform data
+ */
+static int mxc_uart1_pins[] = {
+	PC9_PF_UART1_CTS,
+	PC10_PF_UART1_RTS,
+	PC11_PF_UART1_TXD,
+	PC12_PF_UART1_RXD,
+};
+
+static int uart1_mxc_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins), "UART1");
+}
+
+static int uart1_mxc_exit(struct platform_device *pdev)
+{
+	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins));
+	return 0;
+}
+
+static int mxc_uart2_pins[] = {
+	PB28_PF_UART2_CTS,
+	PB29_PF_UART2_RTS,
+	PB30_PF_UART2_TXD,
+	PB31_PF_UART2_RXD,
+};
+
+static int uart2_mxc_init(struct platform_device *pdev)
+{
+	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
+			ARRAY_SIZE(mxc_uart2_pins), "UART2");
+}
+
+static int uart2_mxc_exit(struct platform_device *pdev)
+{
+	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
+			ARRAY_SIZE(mxc_uart2_pins));
+	return 0;
+}
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.init = uart1_mxc_init,
+		.exit = uart1_mxc_exit,
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.init = uart2_mxc_init,
+		.exit = uart2_mxc_exit,
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+/*
+ * Physmap flash
+ */
+
+static struct physmap_flash_data mx1ads_flash_data = {
+	.width		= 4,		/* bankwidth in bytes */
+};
+
+static struct resource flash_resource = {
+	.start	= IMX_CS0_PHYS,
+	.end	= IMX_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+/*
+ * Board init
+ */
+static void __init mx1ads_init(void)
+{
+	/* UART */
+	mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
+	mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
+
+	/* Physmap flash */
+	mxc_register_device(&flash_device, &mx1ads_flash_data);
+}
+
+static void __init mx1ads_timer_init(void)
+{
+	mxc_clocks_init(32000);
+	mxc_timer_init("gpt_clk");
+}
+
+struct sys_timer mx1ads_timer = {
+	.init	= mx1ads_timer_init,
+};
+
+MACHINE_START(MX1ADS, "Freescale MX1ADS")
+	/* Maintainer: Sascha Hauer, Pengutronix */
+	.phys_io	= IMX_IO_PHYS,
+	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mxc_map_io,
+	.init_irq	= mxc_init_irq,
+	.timer		= &mx1ads_timer,
+	.init_machine	= mx1ads_init,
+MACHINE_END
+
+MACHINE_START(MXLADS, "Freescale MXLADS")
+	.phys_io	= IMX_IO_PHYS,
+	.io_pg_offst	= (IMX_IO_BASE >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mxc_map_io,
+	.init_irq	= mxc_init_irq,
+	.timer		= &mx1ads_timer,
+	.init_machine	= mx1ads_init,
+MACHINE_END

arch/arm/mach-mx2/devices.c

@@ -205,6 +205,25 @@ struct platform_device mxc_w1_master_device = {
 	.resource = mxc_w1_master_resources,
 };
 
+static struct resource mxc_nand_resources[] = {
+	{
+		.start	= NFC_BASE_ADDR,
+		.end	= NFC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MXC_INT_NANDFC,
+		.end	= MXC_INT_NANDFC,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mxc_nand_device = {
+	.name = "mxc_nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_nand_resources),
+	.resource = mxc_nand_resources,
+};
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	[0] = {

arch/arm/mach-mx2/devices.h

@@ -13,3 +13,4 @@ extern struct platform_device mxc_uart_device3;
 extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_uart_device5;
 extern struct platform_device mxc_w1_master_device;
+extern struct platform_device mxc_nand_device;

arch/arm/mach-mx2/mx27ads.c

@@ -68,15 +68,14 @@ static int mxc_uart0_pins[] = {
 static int uart_mxc_port0_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART0");
+			ARRAY_SIZE(mxc_uart0_pins), "UART0");
 }
 
 static int uart_mxc_port0_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART0");
+	mxc_gpio_release_multiple_pins(mxc_uart0_pins,
+			ARRAY_SIZE(mxc_uart0_pins));
+	return 0;
 }
 
 static int mxc_uart1_pins[] = {
@@ -89,15 +88,14 @@ static int mxc_uart1_pins[] = {
 static int uart_mxc_port1_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART1");
+			ARRAY_SIZE(mxc_uart1_pins), "UART1");
 }
 
 static int uart_mxc_port1_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART1");
+	mxc_gpio_setup_release_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins));
+	return 0;
 }
 
 static int mxc_uart2_pins[] = {
@@ -110,15 +108,14 @@ static int mxc_uart2_pins[] = {
 static int uart_mxc_port2_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART2");
+			ARRAY_SIZE(mxc_uart2_pins), "UART2");
 }
 
 static int uart_mxc_port2_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART2");
+	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
+			ARRAY_SIZE(mxc_uart2_pins));
+	return 0;
 }
 
 static int mxc_uart3_pins[] = {
@@ -131,15 +128,13 @@ static int mxc_uart3_pins[] = {
 static int uart_mxc_port3_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
-			ARRAY_SIZE(mxc_uart3_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART3");
+			ARRAY_SIZE(mxc_uart3_pins), "UART3");
 }
 
 static int uart_mxc_port3_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
-			ARRAY_SIZE(mxc_uart3_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART3");
+	mxc_gpio_release_multiple_pins(mxc_uart3_pins,
+			ARRAY_SIZE(mxc_uart3_pins));
 }
 
 static int mxc_uart4_pins[] = {
@@ -152,15 +147,14 @@ static int mxc_uart4_pins[] = {
 static int uart_mxc_port4_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
-			ARRAY_SIZE(mxc_uart4_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART4");
+			ARRAY_SIZE(mxc_uart4_pins), "UART4");
 }
 
 static int uart_mxc_port4_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
-			ARRAY_SIZE(mxc_uart4_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART4");
+	mxc_gpio_release_multiple_pins(mxc_uart4_pins,
+			ARRAY_SIZE(mxc_uart4_pins));
+	return 0;
 }
 
 static int mxc_uart5_pins[] = {
@@ -173,15 +167,14 @@ static int mxc_uart5_pins[] = {
 static int uart_mxc_port5_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
-			ARRAY_SIZE(mxc_uart5_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART5");
+			ARRAY_SIZE(mxc_uart5_pins), "UART5");
 }
 
 static int uart_mxc_port5_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
-			ARRAY_SIZE(mxc_uart5_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART5");
+	mxc_gpio_release_multiple_pins(mxc_uart5_pins,
+			ARRAY_SIZE(mxc_uart5_pins));
+	return 0;
 }
 
 static struct platform_device *platform_devices[] __initdata = {
@@ -212,15 +205,13 @@ static int mxc_fec_pins[] = {
 static void gpio_fec_active(void)
 {
 	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "FEC");
+			ARRAY_SIZE(mxc_fec_pins), "FEC");
 }
 
 static void gpio_fec_inactive(void)
 {
-	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "FEC");
+	mxc_gpio_release_multiple_pins(mxc_fec_pins,
+			ARRAY_SIZE(mxc_fec_pins));
 }
 
 static struct imxuart_platform_data uart_pdata[] = {

arch/arm/mach-mx2/pcm038.c

@@ -19,6 +19,7 @@
 
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 #include <mach/common.h>
@@ -27,9 +28,35 @@
 #include <asm/mach/time.h>
 #include <mach/imx-uart.h>
 #include <mach/board-pcm038.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
 
+/*
+ * Phytec's PCM038 comes with 2MiB battery buffered SRAM,
+ * 16 bit width
+ */
+
+static struct platdata_mtd_ram pcm038_sram_data = {
+	.bankwidth = 2,
+};
+
+static struct resource pcm038_sram_resource = {
+	.start = CS1_BASE_ADDR,
+	.end   = CS1_BASE_ADDR + 512 * 1024 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm038_sram_mtd_device = {
+	.name = "mtd-ram",
+	.id = 0,
+	.dev = {
+		.platform_data = &pcm038_sram_data,
+	},
+	.num_resources = 1,
+	.resource = &pcm038_sram_resource,
+};
+
 /*
  * Phytec's phyCORE-i.MX27 comes with 32MiB flash,
  * 16 bit width
@@ -64,15 +91,14 @@ static int mxc_uart0_pins[] = {
 static int uart_mxc_port0_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART0");
+			ARRAY_SIZE(mxc_uart0_pins), "UART0");
 }
 
 static int uart_mxc_port0_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
-			ARRAY_SIZE(mxc_uart0_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART0");
+	mxc_gpio_release_multiple_pins(mxc_uart0_pins,
+			ARRAY_SIZE(mxc_uart0_pins));
+	return 0;
 }
 
 static int mxc_uart1_pins[] = {
@@ -85,15 +111,14 @@ static int mxc_uart1_pins[] = {
 static int uart_mxc_port1_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART1");
+			ARRAY_SIZE(mxc_uart1_pins), "UART1");
 }
 
 static int uart_mxc_port1_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
-			ARRAY_SIZE(mxc_uart1_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART1");
+	mxc_gpio_release_multiple_pins(mxc_uart1_pins,
+			ARRAY_SIZE(mxc_uart1_pins));
+	return 0;
 }
 
 static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS,
@@ -104,15 +129,14 @@ static int mxc_uart2_pins[] = { PE10_PF_UART3_CTS,
 static int uart_mxc_port2_init(struct platform_device *pdev)
 {
 	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "UART2");
+			ARRAY_SIZE(mxc_uart2_pins), "UART2");
 }
 
 static int uart_mxc_port2_exit(struct platform_device *pdev)
 {
-	return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
-			ARRAY_SIZE(mxc_uart2_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "UART2");
+	mxc_gpio_release_multiple_pins(mxc_uart2_pins,
+			ARRAY_SIZE(mxc_uart2_pins));
+	return 0;
 }
 
 static struct imxuart_platform_data uart_pdata[] = {
@@ -155,30 +179,46 @@ static int mxc_fec_pins[] = {
 static void gpio_fec_active(void)
 {
 	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins),
-			MXC_GPIO_ALLOC_MODE_NORMAL, "FEC");
+			ARRAY_SIZE(mxc_fec_pins), "FEC");
 }
 
 static void gpio_fec_inactive(void)
 {
-	mxc_gpio_setup_multiple_pins(mxc_fec_pins,
-			ARRAY_SIZE(mxc_fec_pins),
-			MXC_GPIO_ALLOC_MODE_RELEASE, "FEC");
+	mxc_gpio_release_multiple_pins(mxc_fec_pins,
+			ARRAY_SIZE(mxc_fec_pins));
 }
 
+static struct mxc_nand_platform_data pcm038_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
 static struct platform_device *platform_devices[] __initdata = {
 	&pcm038_nor_mtd_device,
 	&mxc_w1_master_device,
+	&pcm038_sram_mtd_device,
 };
 
+/* On pcm038 there's a sram attached to CS1, we enable the chipselect here and
+ * setup other stuffs to access the sram. */
+static void __init pcm038_init_sram(void)
+{
+	__raw_writel(0x0000d843, CSCR_U(1));
+	__raw_writel(0x22252521, CSCR_L(1));
+	__raw_writel(0x22220a00, CSCR_A(1));
+}
+
 static void __init pcm038_init(void)
 {
 	gpio_fec_active();
+	pcm038_init_sram();
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
 	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
 	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+
 	mxc_gpio_mode(PE16_AF_RTCK); /* OWIRE */
+	mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
 
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 

arch/arm/mach-mx3/Kconfig

@@ -21,5 +21,19 @@ config MACH_MX31LITE
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
 
+config MACH_MX31_3DS
+	bool "Support MX31PDK (3DS)"
+	default n
+	help
+	  Include support for MX31PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX31MOBOARD
+	bool "Support mx31moboard platforms (EPFL Mobots group)"
+	default n
+	help
+	  Include support for mx31moboard platform. This includes specific
+	  configurations for the board and its peripherals.
+
 endmenu
 

arch/arm/mach-mx3/Makefile

@@ -8,3 +8,5 @@ obj-y			:= mm.o clock.o devices.o iomux.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
+obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
+obj-$(CONFIG_MACH_MX31MOBOARD)	+= mx31moboard.o

arch/arm/mach-mx3/devices.c

@@ -160,3 +160,22 @@ struct platform_device mxc_w1_master_device = {
 	.num_resources = ARRAY_SIZE(mxc_w1_master_resources),
 	.resource = mxc_w1_master_resources,
 };
+
+static struct resource mxc_nand_resources[] = {
+	{
+		.start	= NFC_BASE_ADDR,
+		.end	= NFC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MXC_INT_NANDFC,
+		.end	= MXC_INT_NANDFC,
+		.flags	= IORESOURCE_IRQ
+	},
+};
+
+struct platform_device mxc_nand_device = {
+	.name = "mxc_nand",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mxc_nand_resources),
+	.resource = mxc_nand_resources,
+};

arch/arm/mach-mx3/devices.h

@@ -5,3 +5,4 @@ extern struct platform_device mxc_uart_device2;
 extern struct platform_device mxc_uart_device3;
 extern struct platform_device mxc_uart_device4;
 extern struct platform_device mxc_w1_master_device;
+extern struct platform_device mxc_nand_device;

arch/arm/mach-mx3/iomux.c

@@ -74,17 +74,18 @@ void mxc_iomux_set_pad(enum iomux_pins pin, u32 config)
 	u32 field, l;
 	void __iomem *reg;
 
-	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3;
+	pin &= IOMUX_PADNUM_MASK;
+	reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4;
 	field = (pin + 2) % 3;
 
-	pr_debug("%s: reg offset = 0x%x field = %d\n",
+	pr_debug("%s: reg offset = 0x%x, field = %d\n",
 			__func__, (pin + 2) / 3, field);
 
 	spin_lock(&gpio_mux_lock);
 
 	l = __raw_readl(reg);
-	l &= ~(0x1ff << (field * 9));
-	l |= config << (field * 9);
+	l &= ~(0x1ff << (field * 10));
+	l |= config << (field * 10);
 	__raw_writel(l, reg);
 
 	spin_unlock(&gpio_mux_lock);

arch/arm/mach-mx3/mx31moboard.c

+/*
+ *  Copyright (C) 2008 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/partitions.h>
+#include <linux/memory.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+
+#include "devices.h"
+
+static struct physmap_flash_data mx31moboard_flash_data = {
+	.width  	= 2,
+};
+
+static struct resource mx31moboard_flash_resource = {
+	.start	= 0xa0000000,
+	.end	= 0xa1ffffff,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device mx31moboard_flash = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &mx31moboard_flash_data,
+	},
+	.resource = &mx31moboard_flash_resource,
+	.num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mx31moboard_flash,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
+	mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
+	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
+	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_iomux_mode(MX31_PIN_CTS2__CTS2);
+	mxc_iomux_mode(MX31_PIN_RTS2__RTS2);
+	mxc_iomux_mode(MX31_PIN_TXD2__TXD2);
+	mxc_iomux_mode(MX31_PIN_RXD2__RXD2);
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+	mxc_iomux_mode(MX31_PIN_PC_RST__CTS5);
+	mxc_iomux_mode(MX31_PIN_PC_VS2__RTS5);
+	mxc_iomux_mode(MX31_PIN_PC_BVD2__TXD5);
+	mxc_iomux_mode(MX31_PIN_PC_BVD1__RXD5);
+
+	mxc_register_device(&mxc_uart_device4, &uart_pdata);
+}
+
+/*
+ * This structure defines static mappings for the mx31moboard.
+ */
+static struct map_desc mx31moboard_io_desc[] __initdata = {
+	{
+		.virtual	= AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
+		.length		= AIPS1_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
+		.length		= AIPS2_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+void __init mx31moboard_map_io(void)
+{
+	mxc_map_io();
+	iotable_init(mx31moboard_io_desc, ARRAY_SIZE(mx31moboard_io_desc));
+}
+
+static void __init mx31moboard_timer_init(void)
+{
+	mxc_clocks_init(26000000);
+	mxc_timer_init("ipg_clk.0");
+}
+
+struct sys_timer mx31moboard_timer = {
+	.init	= mx31moboard_timer_init,
+};
+
+MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
+	/* Maintainer: Valentin Longchamp, EPFL Mobots group */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx31moboard_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx31moboard_timer,
+MACHINE_END
+

arch/arm/mach-mx3/mx31pdk.c

+/*
+ *  Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+#include <mach/common.h>
+#include <mach/board-mx31pdk.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include "devices.h"
+
+/*!
+ * @file mx31pdk.c
+ *
+ * @brief This file contains the board-specific initialization routines.
+ *
+ * @ingroup System
+ */
+
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static inline void mxc_init_imx_uart(void)
+{
+	mxc_iomux_mode(MX31_PIN_CTS1__CTS1);
+	mxc_iomux_mode(MX31_PIN_RTS1__RTS1);
+	mxc_iomux_mode(MX31_PIN_TXD1__TXD1);
+	mxc_iomux_mode(MX31_PIN_RXD1__RXD1);
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+/*!
+ * This structure defines static mappings for the i.MX31PDK board.
+ */
+static struct map_desc mx31pdk_io_desc[] __initdata = {
+	{
+		.virtual	= AIPS1_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(AIPS1_BASE_ADDR),
+		.length		= AIPS1_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual	= AIPS2_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
+		.length		= AIPS2_SIZE,
+		.type		= MT_DEVICE_NONSHARED
+	},
+};
+
+/*!
+ * Set up static virtual mappings.
+ */
+static void __init mx31pdk_map_io(void)
+{
+	mxc_map_io();
+	iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
+}
+
+/*!
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+	mxc_init_imx_uart();
+}
+
+static void __init mx31pdk_timer_init(void)
+{
+	mxc_clocks_init(26000000);
+	mxc_timer_init("ipg_clk.0");
+}
+
+static struct sys_timer mx31pdk_timer = {
+	.init	= mx31pdk_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros defined in arch.h in order to
+ * initialize __mach_desc_MX31PDK data structure.
+ */
+MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
+	/* Maintainer: Freescale Semiconductor, Inc. */
+	.phys_io	= AIPS1_BASE_ADDR,
+	.io_pg_offst	= ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = mx31pdk_map_io,
+	.init_irq       = mxc_init_irq,
+	.init_machine   = mxc_board_init,
+	.timer          = &mx31pdk_timer,
+MACHINE_END

arch/arm/mach-mx3/pcm037.c

@@ -21,7 +21,11 @@
 
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
 #include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -32,6 +36,7 @@
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-pcm037.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
 
@@ -59,8 +64,63 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static struct resource smc911x_resources[] = {
+	[0] = {
+		.start		= CS1_BASE_ADDR + 0x300,
+		.end		= CS1_BASE_ADDR + 0x300 + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+		.end		= IOMUX_TO_IRQ(MX31_PIN_GPIO3_1),
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc911x_platdata smc911x_info = {
+	.flags		= SMC911X_USE_32BIT,
+	.irq_flags	= IRQF_SHARED | IRQF_TRIGGER_LOW,
+};
+
+static struct platform_device pcm037_eth = {
+	.name		= "smc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc911x_resources),
+	.resource	= smc911x_resources,
+	.dev		= {
+		.platform_data = &smc911x_info,
+	},
+};
+
+static struct platdata_mtd_ram pcm038_sram_data = {
+	.bankwidth = 2,
+};
+
+static struct resource pcm038_sram_resource = {
+	.start = CS4_BASE_ADDR,
+	.end   = CS4_BASE_ADDR + 512 * 1024 - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm037_sram_device = {
+	.name = "mtd-ram",
+	.id = 0,
+	.dev = {
+		.platform_data = &pcm038_sram_data,
+	},
+	.num_resources = 1,
+	.resource = &pcm038_sram_resource,
+};
+
+static struct mxc_nand_platform_data pcm037_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
+	&pcm037_eth,
+	&pcm037_sram_device,
 };
 
 /*
@@ -84,6 +144,13 @@ static void __init mxc_board_init(void)
 
 	mxc_iomux_mode(MX31_PIN_BATT_LINE__OWIRE);
 	mxc_register_device(&mxc_w1_master_device, NULL);
+
+	/* SMSC9215 IRQ pin */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO));
+	if (!gpio_request(MX31_PIN_GPIO3_1, "pcm037-eth"))
+		gpio_direction_input(MX31_PIN_GPIO3_1);
+
+	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 }
 
 /*

arch/arm/plat-mxc/Kconfig

@@ -6,6 +6,11 @@ choice
 	prompt "MXC/iMX Base Type"
 	default ARCH_MX3
 
+config ARCH_MX1
+	bool "MX1-based"
+	help
+	  This enables support for systems based on the Freescale i.MX1 family
+
 config ARCH_MX2
 	bool "MX2-based"
 	select CPU_ARM926T
@@ -20,6 +25,7 @@ config ARCH_MX3
 
 endchoice
 
+source "arch/arm/mach-mx1/Kconfig"
 source "arch/arm/mach-mx2/Kconfig"
 source "arch/arm/mach-mx3/Kconfig"
 

arch/arm/plat-mxc/Makefile

@@ -5,4 +5,5 @@
 # Common support
 obj-y := irq.o clock.o gpio.o time.o devices.o
 
+obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o

arch/arm/plat-mxc/dma-mx1-mx2.c

@@ -34,7 +34,6 @@
 #include <asm/system.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
-#include <mach/dma.h>
 #include <mach/dma-mx1-mx2.h>
 
 #define DMA_DCR     0x00		/* Control Register */
@@ -114,7 +113,7 @@ struct imx_dma_channel {
 	void (*err_handler) (int, void *, int errcode);
 	void (*prog_handler) (int, void *, struct scatterlist *);
 	void *data;
-	dmamode_t  dma_mode;
+	unsigned int  dma_mode;
 	struct scatterlist *sg;
 	unsigned int resbytes;
 	int dma_num;
@@ -193,7 +192,7 @@ static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
 int
 imx_dma_setup_single(int channel, dma_addr_t dma_address,
 		     unsigned int dma_length, unsigned int dev_addr,
-		     dmamode_t dmamode)
+		     unsigned int dmamode)
 {
 	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
 
@@ -288,7 +287,7 @@ int
 imx_dma_setup_sg(int channel,
 		 struct scatterlist *sg, unsigned int sgcount,
 		 unsigned int dma_length, unsigned int dev_addr,
-		 dmamode_t dmamode)
+		 unsigned int dmamode)
 {
 	struct imx_dma_channel *imxdma = &imx_dma_channels[channel];
 

arch/arm/plat-mxc/gpio.c

@@ -115,8 +115,8 @@ static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
 	}
 }
 
-#ifdef CONFIG_ARCH_MX3
-/* MX3 has one interrupt *per* gpio port */
+#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
+/* MX1 and MX3 has one interrupt *per* gpio port */
 static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
 {
 	u32 irq_stat;
@@ -237,7 +237,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		/* its a serious configuration bug when it fails */
 		BUG_ON( gpiochip_add(&port[i].chip) < 0 );
 
-#ifdef CONFIG_ARCH_MX3
+#if defined(CONFIG_ARCH_MX3) || defined(CONFIG_ARCH_MX1)
 		/* setup one handler for each entry */
 		set_irq_chained_handler(port[i].irq, mx3_gpio_irq_handler);
 		set_irq_data(port[i].irq, &port[i]);

arch/arm/plat-mxc/include/mach/board-mx27ads.h

@@ -28,11 +28,6 @@
 /*
  * MXC UART EVB board level configurations
  */
-
-#define MXC_LL_EXTUART_PADDR	(CS4_BASE_ADDR + 0x20000)
-#define MXC_LL_EXTUART_VADDR	(CS4_BASE_ADDR_VIRT + 0x20000)
-#define MXC_LL_EXTUART_16BIT_BUS
-
 #define MXC_LL_UART_PADDR       UART1_BASE_ADDR
 #define MXC_LL_UART_VADDR       AIPI_IO_ADDRESS(UART1_BASE_ADDR)
 

arch/arm/plat-mxc/include/mach/board-mx31pdk.h

+/*
+ * Copyright 2008 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */

arch/arm/plat-mxc/include/mach/debug-macro.S

@@ -27,6 +27,9 @@
 #endif
 #ifdef CONFIG_MACH_PCM038
 #include <mach/board-pcm038.h>
+#endif
+#ifdef CONFIG_MACH_MX31_3DS
+#include <mach/board-mx31pdk.h>
 #endif
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0

arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h

@@ -22,13 +22,15 @@
  * MA 02110-1301, USA.
  */
 
-#include <mach/dma.h>
-
 #ifndef __ASM_ARCH_MXC_DMA_H
 #define __ASM_ARCH_MXC_DMA_H
 
 #define IMX_DMA_CHANNELS  16
 
+#define DMA_MODE_READ		0
+#define DMA_MODE_WRITE		1
+#define DMA_MODE_MASK		1
+
 #define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR)
 
 #define IMX_DMA_MEMSIZE_32	(0 << 4)
@@ -54,12 +56,12 @@ imx_dma_config_burstlen(int channel, unsigned int burstlen);
 int
 imx_dma_setup_single(int channel, dma_addr_t dma_address,
 		unsigned int dma_length, unsigned int dev_addr,
-		dmamode_t dmamode);
+		unsigned int dmamode);
 
 int
 imx_dma_setup_sg(int channel, struct scatterlist *sg,
 		unsigned int sgcount, unsigned int dma_length,
-		unsigned int dev_addr, dmamode_t dmamode);
+		unsigned int dev_addr, unsigned int dmamode);
 
 int
 imx_dma_setup_handlers(int channel,

arch/arm/plat-mxc/include/mach/hardware.h

@@ -32,6 +32,10 @@
 # endif
 #endif
 
+#ifdef CONFIG_ARCH_MX1
+# include <mach/mx1.h>
+#endif
+
 #include <mach/mxc.h>
 
 #endif /* __ASM_ARCH_MXC_HARDWARE_H__ */

arch/arm/plat-mxc/include/mach/iomux-mx1-mx2.h

@@ -21,12 +21,6 @@
 
 #include <linux/io.h>
 
-#define MXC_GPIO_ALLOC_MODE_NORMAL	0
-#define MXC_GPIO_ALLOC_MODE_NO_ALLOC	1
-#define MXC_GPIO_ALLOC_MODE_TRY_ALLOC	2
-#define MXC_GPIO_ALLOC_MODE_ALLOC_ONLY	4
-#define MXC_GPIO_ALLOC_MODE_RELEASE	8
-
 /*
  *  GPIO Module and I/O Multiplexer
  *  x = 0..3 for reg_A, reg_B, reg_C, reg_D
@@ -103,7 +97,8 @@
 
 extern void mxc_gpio_mode(int gpio_mode);
 extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-					int alloc_mode, const char *label);
+					const char *label);
+extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count);
 
 /*-------------------------------------------------------------------------*/
 
@@ -113,9 +108,9 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
  * missing on some (many) pins
  */
 #ifdef CONFIG_ARCH_MX1
-#define PA0_AIN_SPI2_CLK     (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0)
+#define PA0_AIN_SPI2_CLK     (GPIO_PORTA | GPIO_OUT | 0)
 #define PA0_AF_ETMTRACESYNC  (GPIO_PORTA | GPIO_AF | 0)
-#define PA1_AOUT_SPI2_RXD    (GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1)
+#define PA1_AOUT_SPI2_RXD    (GPIO_PORTA | GPIO_IN | 1)
 #define PA1_PF_TIN           (GPIO_PORTA | GPIO_PF | 1)
 #define PA2_PF_PWM0          (GPIO_PORTA | GPIO_OUT | GPIO_PF | 2)
 #define PA3_PF_CSI_MCLK      (GPIO_PORTA | GPIO_PF | 3)
@@ -133,7 +128,7 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PA15_PF_I2C_SDA      (GPIO_PORTA | GPIO_OUT | GPIO_PF | 15)
 #define PA16_PF_I2C_SCL      (GPIO_PORTA | GPIO_OUT | GPIO_PF | 16)
 #define PA17_AF_ETMTRACEPKT4 (GPIO_PORTA | GPIO_AF | 17)
-#define PA17_AIN_SPI2_SS     (GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17)
+#define PA17_AIN_SPI2_SS     (GPIO_PORTA | GPIO_OUT | 17)
 #define PA18_AF_ETMTRACEPKT5 (GPIO_PORTA | GPIO_AF | 18)
 #define PA19_AF_ETMTRACEPKT6 (GPIO_PORTA | GPIO_AF | 19)
 #define PA20_AF_ETMTRACEPKT7 (GPIO_PORTA | GPIO_AF | 20)
@@ -201,27 +196,27 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PC15_PF_SPI1_SS      (GPIO_PORTC | GPIO_PF | 15)
 #define PC16_PF_SPI1_MISO    (GPIO_PORTC | GPIO_PF | 16)
 #define PC17_PF_SPI1_MOSI    (GPIO_PORTC | GPIO_PF | 17)
-#define PC24_BIN_UART3_RI    (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
-#define PC25_BIN_UART3_DSR   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
-#define PC26_AOUT_UART3_DTR  (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26)
-#define PC27_BIN_UART3_DCD   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
-#define PC28_BIN_UART3_CTS   (GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
-#define PC29_AOUT_UART3_RTS  (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29)
-#define PC30_BIN_UART3_TX    (GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30)
-#define PC31_AOUT_UART3_RX   (GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
+#define PC24_BIN_UART3_RI    (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24)
+#define PC25_BIN_UART3_DSR   (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25)
+#define PC26_AOUT_UART3_DTR  (GPIO_PORTC | GPIO_IN | 26)
+#define PC27_BIN_UART3_DCD   (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27)
+#define PC28_BIN_UART3_CTS   (GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28)
+#define PC29_AOUT_UART3_RTS  (GPIO_PORTC | GPIO_IN | 29)
+#define PC30_BIN_UART3_TX    (GPIO_PORTC | GPIO_BIN | 30)
+#define PC31_AOUT_UART3_RX   (GPIO_PORTC | GPIO_IN | 31)
 #define PD6_PF_LSCLK         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 6)
 #define PD7_PF_REV           (GPIO_PORTD | GPIO_PF | 7)
-#define PD7_AF_UART2_DTR     (GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
-#define PD7_AIN_SPI2_SCLK    (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7)
+#define PD7_AF_UART2_DTR     (GPIO_PORTD | GPIO_IN | GPIO_AF | 7)
+#define PD7_AIN_SPI2_SCLK    (GPIO_PORTD | GPIO_AIN | 7)
 #define PD8_PF_CLS           (GPIO_PORTD | GPIO_PF | 8)
 #define PD8_AF_UART2_DCD     (GPIO_PORTD | GPIO_OUT | GPIO_AF | 8)
-#define PD8_AIN_SPI2_SS      (GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8)
+#define PD8_AIN_SPI2_SS      (GPIO_PORTD | GPIO_AIN | 8)
 #define PD9_PF_PS            (GPIO_PORTD | GPIO_PF | 9)
 #define PD9_AF_UART2_RI      (GPIO_PORTD | GPIO_OUT | GPIO_AF | 9)
-#define PD9_AOUT_SPI2_RXD    (GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9)
+#define PD9_AOUT_SPI2_RXD    (GPIO_PORTD | GPIO_IN | 9)
 #define PD10_PF_SPL_SPR      (GPIO_PORTD | GPIO_OUT | GPIO_PF | 10)
 #define PD10_AF_UART2_DSR    (GPIO_PORTD | GPIO_OUT | GPIO_AF | 10)
-#define PD10_AIN_SPI2_TXD    (GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10)
+#define PD10_AIN_SPI2_TXD    (GPIO_PORTD | GPIO_OUT | 10)
 #define PD11_PF_CONTRAST     (GPIO_PORTD | GPIO_OUT | GPIO_PF | 11)
 #define PD12_PF_ACD_OE       (GPIO_PORTD | GPIO_OUT | GPIO_PF | 12)
 #define PD13_PF_LP_HSYNC     (GPIO_PORTD | GPIO_OUT | GPIO_PF | 13)
@@ -243,7 +238,7 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PD29_PF_LD14         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 29)
 #define PD30_PF_LD15         (GPIO_PORTD | GPIO_OUT | GPIO_PF | 30)
 #define PD31_PF_TMR2OUT      (GPIO_PORTD | GPIO_PF | 31)
-#define PD31_BIN_SPI2_TXD    (GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31)
+#define PD31_BIN_SPI2_TXD    (GPIO_PORTD | GPIO_BIN | 31)
 #endif
 
 #ifdef CONFIG_ARCH_MX2
@@ -279,6 +274,12 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PA29_PF_VSYNC		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 29)
 #define PA30_PF_CONTRAST	(GPIO_PORTA | GPIO_OUT | GPIO_PF | 30)
 #define PA31_PF_OE_ACD		(GPIO_PORTA | GPIO_OUT | GPIO_PF | 31)
+#define PB4_PF_SD2_D0		(GPIO_PORTB | GPIO_PF |  4)
+#define PB5_PF_SD2_D1		(GPIO_PORTB | GPIO_PF |  5)
+#define PB6_PF_SD2_D2		(GPIO_PORTB | GPIO_PF |  6)
+#define PB7_PF_SD2_D3		(GPIO_PORTB | GPIO_PF |  7)
+#define PB8_PF_SD2_CMD		(GPIO_PORTB | GPIO_PF |  8)
+#define PB9_PF_SD2_CLK		(GPIO_PORTB | GPIO_PF |  9)
 #define PB10_PF_CSI_D0		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 10)
 #define PB10_AF_UART6_TXD	(GPIO_PORTB | GPIO_OUT | GPIO_AF | 10)
 #define PB11_PF_CSI_D1		(GPIO_PORTB | GPIO_OUT | GPIO_PF | 11)
@@ -315,6 +316,13 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PB31_AF_UART4_RXD	(GPIO_PORTB | GPIO_IN  | GPIO_AF | 31)
 #define PC5_PF_I2C2_SDA		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 5)
 #define PC6_PF_I2C2_SCL		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 6)
+#define PC7_PF_USBOTG_DATA5	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 7)
+#define PC8_PF_USBOTG_DATA6	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 8)
+#define PC9_PF_USBOTG_DATA0	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 9)
+#define PC10_PF_USBOTG_DATA2	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 10)
+#define PC11_PF_USBOTG_DATA1	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 11)
+#define PC12_PF_USBOTG_DATA4	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 12)
+#define PC13_PF_USBOTG_DATA3	(GPIO_PORTC | GPIO_OUT | GPIO_PF | 13)
 #define PC16_PF_SSI4_FS		(GPIO_PORTC | GPIO_IN  | GPIO_PF | 16)
 #define PC17_PF_SSI4_RXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 17)
 #define PC18_PF_SSI4_TXD	(GPIO_PORTC | GPIO_IN  | GPIO_PF | 18)
@@ -365,6 +373,9 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PD30_PF_CSPI1_MISO	(GPIO_PORTD | GPIO_IN | GPIO_PF  | 30)
 #define PD31_PF_CSPI1_MOSI	(GPIO_PORTD | GPIO_OUT | GPIO_PF  | 31)
 #define PF23_AIN_FEC_TX_EN	(GPIO_PORTF | GPIO_OUT | GPIO_AIN | 23)
+#define PE0_PF_USBOTG_NXT	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 0)
+#define PE1_PF_USBOTG_STP	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 1)
+#define PE2_PF_USBOTG_DIR	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 2)
 #define PE3_PF_UART2_CTS	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 3)
 #define PE4_PF_UART2_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 4)
 #define PE6_PF_UART2_TXD	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 6)
@@ -379,10 +390,18 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define PE15_PF_UART1_RTS	(GPIO_PORTE | GPIO_IN  | GPIO_PF | 15)
 #define PE16_AF_RTCK		(GPIO_PORTE | GPIO_OUT | GPIO_AF | 16)
 #define PE16_PF_RTCK		(GPIO_PORTE | GPIO_OUT | GPIO_PF | 16)
+#define PE18_PF_SDHC1_D0	(GPIO_PORTE | GPIO_PF | 18)
 #define PE18_AF_CSPI3_MISO	(GPIO_PORTE | GPIO_IN  | GPIO_AF | 18)
+#define PE19_PF_SDHC1_D1	(GPIO_PORTE | GPIO_PF | 19)
+#define PE20_PF_SDHC1_D2	(GPIO_PORTE | GPIO_PF | 20)
+#define PE21_PF_SDHC1_D3	(GPIO_PORTE | GPIO_PF | 21)
 #define PE21_AF_CSPI3_SS	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 21)
+#define PE22_PF_SDHC1_CMD	(GPIO_PORTE | GPIO_PF | 22)
 #define PE22_AF_CSPI3_MOSI	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 22)
+#define PE22_PF_SDHC1_CLK	(GPIO_PORTE | GPIO_PF | 23)
 #define PE23_AF_CSPI3_SCLK	(GPIO_PORTE | GPIO_OUT | GPIO_AF | 23)
+#define PE24_PF_USBOTG_CLK	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 24)
+#define PE25_PF_USBOTG_DATA7	(GPIO_PORTE | GPIO_OUT | GPIO_PF | 25)
 #endif
 
 /* decode irq number to use with IMR(x), ISR(x) and friends */
@@ -392,5 +411,6 @@ extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 #define IRQ_GPIOB(x)  (IRQ_GPIOA(32) + x)
 #define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
 #define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
+#define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
 
 #endif /* _MXC_GPIO_MX1_MX2_H */

arch/arm/plat-mxc/include/mach/iomux-mx3.h

@@ -491,6 +491,14 @@ enum iomux_pins {
 #define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RXD1__RXD1		IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CTS2__CTS2		IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RTS2__RTS2		IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_TXD2__TXD2		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RXD2__RXD2		IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_PC_RST__CTS5		IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_PC_VS2__RTS5		IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_PC_BVD2__TXD5		IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_PC_BVD1__RXD5		IOMUX_MODE(MX31_PIN_PC_BVD1, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_CSPI1_MOSI__MOSI	IOMUX_MODE(MX31_PIN_CSPI1_MOSI, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI1_MISO__MISO	IOMUX_MODE(MX31_PIN_CSPI1_MISO, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI1_SCLK__SCLK	IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_FUNC)
@@ -509,6 +517,15 @@ enum iomux_pins {
 #define MX31_PIN_CSPI3_MISO__MISO	IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI3_SCLK__SCLK	IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CSPI3_SPI_RDY__SPI_RDY	IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_BATT_LINE__OWIRE	IOMUX_MODE(MX31_PIN_BATT_LINE, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CS4__CS4		IOMUX_MODE(MX31_PIN_CS4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_DATA3__SD1_DATA3	IOMUX_MODE(MX31_PIN_SD1_DATA3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_DATA2__SD1_DATA2	IOMUX_MODE(MX31_PIN_SD1_DATA2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_DATA1__SD1_DATA1	IOMUX_MODE(MX31_PIN_SD1_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_DATA0__SD1_DATA0	IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_CLK__SD1_CLK	IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SD1_CMD__SD1_CMD	IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
+
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
 

arch/arm/plat-mxc/include/mach/irqs.h

@@ -14,4 +14,9 @@
 #include <mach/hardware.h>
 extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
 
+/* all normal IRQs can be FIQs */
+#define FIQ_START	0
+/* switch betwean IRQ and FIQ */
+extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
+
 #endif /* __ASM_ARCH_MXC_IRQS_H__ */

arch/arm/plat-mxc/include/mach/mtd-xip.h

+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ *
+ * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>, Teltonika, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <mach/mxc_timer.h>
+
+#ifndef __ARCH_IMX_MTD_XIP_H__
+#define __ARCH_IMX_MTD_XIP_H__
+
+#ifdef CONFIG_ARCH_MX1
+/* AITC registers */
+#define AITC_BASE	IO_ADDRESS(AVIC_BASE_ADDR)
+#define NIPNDH		(AITC_BASE + 0x58)
+#define NIPNDL		(AITC_BASE + 0x5C)
+#define INTENABLEH	(AITC_BASE + 0x10)
+#define INTENABLEL	(AITC_BASE + 0x14)
+/* MTD macros */
+#define xip_irqpending() ((__raw_readl(INTENABLEH) &  __raw_readl(NIPNDH)) \
+			|| (__raw_readl(INTENABLEL) &  __raw_readl(NIPNDL)))
+#define xip_currtime()		(__raw_readl(TIMER_BASE + MXC_TCN))
+#define xip_elapsed_since(x)	(signed)((__raw_readl(TIMER_BASE + MXC_TCN) - (x)) / 96)
+#define xip_cpu_idle()		asm volatile ("mcr p15, 0, %0, c7, c0, 4" :: "r" (0))
+#endif /* CONFIG_ARCH_MX1 */
+
+#endif /* __ARCH_IMX_MTD_XIP_H__ */

arch/arm/plat-mxc/include/mach/mx1.h

+/*
+ * Copyright (C) 1997,1998 Russell King
+ * Copyright (C) 1999 ARM Limited
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_MX1_H__
+#define __ASM_ARCH_MXC_MX1_H__
+
+#ifndef __ASM_ARCH_MXC_HARDWARE_H__
+#error "Do not include directly."
+#endif
+
+#include <mach/vmalloc.h>
+
+/*
+ * defines the hardware clock tick rate
+ */
+#define CLOCK_TICK_RATE	16000000
+
+#define PHYS_OFFSET	UL(0x08000000)
+
+/*
+ * Memory map
+ */
+#define IMX_IO_PHYS	0x00200000
+#define IMX_IO_SIZE	0x00100000
+#define IMX_IO_BASE	VMALLOC_END
+
+#define IMX_CS0_PHYS	0x10000000
+#define IMX_CS0_SIZE	0x02000000
+
+#define IMX_CS1_PHYS	0x12000000
+#define IMX_CS1_SIZE	0x01000000
+
+#define IMX_CS2_PHYS	0x13000000
+#define IMX_CS2_SIZE	0x01000000
+
+#define IMX_CS3_PHYS	0x14000000
+#define IMX_CS3_SIZE	0x01000000
+
+#define IMX_CS4_PHYS	0x15000000
+#define IMX_CS4_SIZE	0x01000000
+
+#define IMX_CS5_PHYS	0x16000000
+#define IMX_CS5_SIZE	0x01000000
+
+/*
+ *  Register BASEs, based on OFFSETs
+ */
+#define AIPI1_BASE_ADDR		(0x00000 + IMX_IO_PHYS)
+#define WDT_BASE_ADDR		(0x01000 + IMX_IO_PHYS)
+#define TIM1_BASE_ADDR		(0x02000 + IMX_IO_PHYS)
+#define TIM2_BASE_ADDR		(0x03000 + IMX_IO_PHYS)
+#define RTC_BASE_ADDR		(0x04000 + IMX_IO_PHYS)
+#define LCDC_BASE_ADDR		(0x05000 + IMX_IO_PHYS)
+#define UART1_BASE_ADDR		(0x06000 + IMX_IO_PHYS)
+#define UART2_BASE_ADDR		(0x07000 + IMX_IO_PHYS)
+#define PWM_BASE_ADDR		(0x08000 + IMX_IO_PHYS)
+#define DMA_BASE_ADDR		(0x09000 + IMX_IO_PHYS)
+#define AIPI2_BASE_ADDR		(0x10000 + IMX_IO_PHYS)
+#define SIM_BASE_ADDR		(0x11000 + IMX_IO_PHYS)
+#define USBD_BASE_ADDR		(0x12000 + IMX_IO_PHYS)
+#define SPI1_BASE_ADDR		(0x13000 + IMX_IO_PHYS)
+#define MMC_BASE_ADDR		(0x14000 + IMX_IO_PHYS)
+#define ASP_BASE_ADDR		(0x15000 + IMX_IO_PHYS)
+#define BTA_BASE_ADDR		(0x16000 + IMX_IO_PHYS)
+#define I2C_BASE_ADDR		(0x17000 + IMX_IO_PHYS)
+#define SSI_BASE_ADDR		(0x18000 + IMX_IO_PHYS)
+#define SPI2_BASE_ADDR		(0x19000 + IMX_IO_PHYS)
+#define MSHC_BASE_ADDR		(0x1A000 + IMX_IO_PHYS)
+#define CCM_BASE_ADDR		(0x1B000 + IMX_IO_PHYS)
+#define SCM_BASE_ADDR		(0x1B804 + IMX_IO_PHYS)
+#define GPIO_BASE_ADDR		(0x1C000 + IMX_IO_PHYS)
+#define EIM_BASE_ADDR		(0x20000 + IMX_IO_PHYS)
+#define SDRAMC_BASE_ADDR	(0x21000 + IMX_IO_PHYS)
+#define MMA_BASE_ADDR		(0x22000 + IMX_IO_PHYS)
+#define AVIC_BASE_ADDR		(0x23000 + IMX_IO_PHYS)
+#define CSI_BASE_ADDR		(0x24000 + IMX_IO_PHYS)
+
+/* macro to get at IO space when running virtually */
+#define IO_ADDRESS(x)	((x) - IMX_IO_PHYS + IMX_IO_BASE)
+
+/* define macros needed for entry-macro.S */
+#define AVIC_IO_ADDRESS(x)	IO_ADDRESS(x)
+
+/* fixed interrput numbers */
+#define INT_SOFTINT		0
+#define CSI_INT			6
+#define DSPA_MAC_INT		7
+#define DSPA_INT		8
+#define COMP_INT		9
+#define MSHC_XINT		10
+#define GPIO_INT_PORTA		11
+#define GPIO_INT_PORTB		12
+#define GPIO_INT_PORTC		13
+#define LCDC_INT		14
+#define SIM_INT			15
+#define SIM_DATA_INT		16
+#define RTC_INT			17
+#define RTC_SAMINT		18
+#define UART2_MINT_PFERR	19
+#define UART2_MINT_RTS		20
+#define UART2_MINT_DTR		21
+#define UART2_MINT_UARTC	22
+#define UART2_MINT_TX		23
+#define UART2_MINT_RX		24
+#define UART1_MINT_PFERR	25
+#define UART1_MINT_RTS		26
+#define UART1_MINT_DTR		27
+#define UART1_MINT_UARTC	28
+#define UART1_MINT_TX		29
+#define UART1_MINT_RX		30
+#define VOICE_DAC_INT		31
+#define VOICE_ADC_INT		32
+#define PEN_DATA_INT		33
+#define PWM_INT			34
+#define SDHC_INT		35
+#define I2C_INT			39
+#define CSPI_INT		41
+#define SSI_TX_INT		42
+#define SSI_TX_ERR_INT		43
+#define SSI_RX_INT		44
+#define SSI_RX_ERR_INT		45
+#define TOUCH_INT		46
+#define USBD_INT0		47
+#define USBD_INT1		48
+#define USBD_INT2		49
+#define USBD_INT3		50
+#define USBD_INT4		51
+#define USBD_INT5		52
+#define USBD_INT6		53
+#define BTSYS_INT		55
+#define BTTIM_INT		56
+#define BTWUI_INT		57
+#define TIM2_INT		58
+#define TIM1_INT		59
+#define DMA_ERR			60
+#define DMA_INT			61
+#define GPIO_INT_PORTD		62
+#define WDT_INT			63
+
+#define MXC_MAX_INT_LINES	64
+
+#define NR_IRQS			256
+
+/* gpio and gpio based interrupt handling */
+#define GPIO_DR		 	0x1C
+#define GPIO_GDIR	 	0x00
+#define GPIO_PSR	 	0x24
+#define GPIO_ICR1	 	0x28
+#define GPIO_ICR2	 	0x2C
+#define GPIO_IMR	 	0x30
+#define GPIO_ISR	 	0x34
+#define GPIO_INT_LOW_LEV	0x3
+#define GPIO_INT_HIGH_LEV	0x2
+#define GPIO_INT_RISE_EDGE 	0x0
+#define GPIO_INT_FALL_EDGE	0x1
+#define GPIO_INT_NONE		0x4
+
+/* DMA */
+#define DMA_REQ_UART3_T		2
+#define DMA_REQ_UART3_R		3
+#define DMA_REQ_SSI2_T		4
+#define DMA_REQ_SSI2_R		5
+#define DMA_REQ_CSI_STAT	6
+#define DMA_REQ_CSI_R		7
+#define DMA_REQ_MSHC		8
+#define DMA_REQ_DSPA_DCT_DOUT	9
+#define DMA_REQ_DSPA_DCT_DIN	10
+#define DMA_REQ_DSPA_MAC	11
+#define DMA_REQ_EXT		12
+#define DMA_REQ_SDHC		13
+#define DMA_REQ_SPI1_R		14
+#define DMA_REQ_SPI1_T		15
+#define DMA_REQ_SSI_T		16
+#define DMA_REQ_SSI_R		17
+#define DMA_REQ_ASP_DAC		18
+#define DMA_REQ_ASP_ADC		19
+#define DMA_REQ_USP_EP(x)	(20 + (x))
+#define DMA_REQ_SPI2_R		26
+#define DMA_REQ_SPI2_T		27
+#define DMA_REQ_UART2_T		28
+#define DMA_REQ_UART2_R		29
+#define DMA_REQ_UART1_T		30
+#define DMA_REQ_UART1_R		31
+
+/* mandatory for CONFIG_LL_DEBUG */
+#define MXC_LL_UART_PADDR	UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR	IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /*  __ASM_ARCH_MXC_MX1_H__ */

arch/arm/plat-mxc/include/mach/mx27.h

@@ -72,7 +72,8 @@
 /* for mx27*/
 #define OTG_BASE_ADDR           USBOTG_BASE_ADDR
 #define SAHARA_BASE_ADDR        (AIPI_BASE_ADDR + 0x25000)
-#define EMMA_BASE_ADDR          (AIPI_BASE_ADDR + 0x26400)
+#define EMMA_PP_BASE_ADDR       (AIPI_BASE_ADDR + 0x26000)
+#define EMMA_PRP_BASE_ADDR      (AIPI_BASE_ADDR + 0x26400)
 #define CCM_BASE_ADDR           (AIPI_BASE_ADDR + 0x27000)
 #define SYSCTRL_BASE_ADDR       (AIPI_BASE_ADDR + 0x27800)
 #define IIM_BASE_ADDR           (AIPI_BASE_ADDR + 0x28000)

arch/arm/plat-mxc/include/mach/mxc_timer.h

@@ -26,7 +26,7 @@
 #include <linux/clk.h>
 #include <mach/hardware.h>
 
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
 #define TIMER_BASE		IO_ADDRESS(TIM1_BASE_ADDR)
 #define TIMER_INTERRUPT		TIM1_INT
 
@@ -65,7 +65,7 @@ static void gpt_irq_acknowledge(void)
 {
 	__raw_writel(0, TIMER_BASE + MXC_TSTAT);
 }
-#endif /* CONFIG_ARCH_IMX */
+#endif /* CONFIG_ARCH_MX1 */
 
 #ifdef CONFIG_ARCH_MX2
 #define TIMER_BASE		IO_ADDRESS(GPT1_BASE_ADDR)

arch/arm/plat-mxc/iomux-mx1-mx2.c

@@ -110,12 +110,13 @@ void mxc_gpio_mode(int gpio_mode)
 EXPORT_SYMBOL(mxc_gpio_mode);
 
 int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
-				int alloc_mode, const char *label)
+		const char *label)
 {
 	const int *p = pin_list;
 	int i;
 	unsigned gpio;
 	unsigned mode;
+	int ret = -EINVAL;
 
 	for (i = 0; i < count; i++) {
 		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
@@ -124,15 +125,10 @@ int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 		if (gpio >= (GPIO_PORT_MAX + 1) * 32)
 			goto setup_error;
 
-		if (alloc_mode & MXC_GPIO_ALLOC_MODE_RELEASE)
-			gpio_free(gpio);
-		else if (!(alloc_mode & MXC_GPIO_ALLOC_MODE_NO_ALLOC))
-			if (gpio_request(gpio, label)
-			   && !(alloc_mode & MXC_GPIO_ALLOC_MODE_TRY_ALLOC))
+		ret = gpio_request(gpio, label);
+		if (ret)
 			goto setup_error;
 
-		if (!(alloc_mode & (MXC_GPIO_ALLOC_MODE_ALLOC_ONLY |
-				    MXC_GPIO_ALLOC_MODE_RELEASE)))
 		mxc_gpio_mode(gpio | mode);
 
 		p++;
@@ -140,17 +136,22 @@ int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
 	return 0;
 
 setup_error:
-	if (alloc_mode & (MXC_GPIO_ALLOC_MODE_NO_ALLOC |
-	    MXC_GPIO_ALLOC_MODE_TRY_ALLOC))
-		return -EINVAL;
+	mxc_gpio_release_multiple_pins(pin_list, i);
+	return ret;
+}
+EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
 
-	while (p != pin_list) {
-		p--;
-		gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
+void mxc_gpio_release_multiple_pins(const int *pin_list, int count)
+{
+	const int *p = pin_list;
+	int i;
+
+	for (i = 0; i < count; i++) {
+		unsigned gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
 		gpio_free(gpio);
+		p++;
 	}
 
-	return -EINVAL;
 }
-EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins);
+EXPORT_SYMBOL(mxc_gpio_release_multiple_pins);
 

arch/arm/plat-mxc/irq.c

@@ -17,9 +17,11 @@
  * MA  02110-1301, USA.
  */
 
+#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <mach/common.h>
+#include <asm/mach/irq.h>
 
 #define AVIC_BASE		IO_ADDRESS(AVIC_BASE_ADDR)
 #define AVIC_INTCNTL		(AVIC_BASE + 0x00)	/* int control reg */
@@ -65,6 +67,28 @@ void imx_irq_set_priority(unsigned char irq, unsigned char prio)
 EXPORT_SYMBOL(imx_irq_set_priority);
 #endif
 
+#ifdef CONFIG_FIQ
+int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
+{
+	unsigned int irqt;
+
+	if (irq >= MXC_MAX_INT_LINES)
+		return -EINVAL;
+
+	if (irq < MXC_MAX_INT_LINES / 2) {
+		irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL);
+	} else {
+		irq -= MXC_MAX_INT_LINES / 2;
+		irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq);
+		__raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(mxc_set_irq_fiq);
+#endif /* CONFIG_FIQ */
+
 /* Disable interrupt number "irq" in the AVIC */
 static void mxc_mask_irq(unsigned int irq)
 {
@@ -91,7 +115,6 @@ static struct irq_chip mxc_avic_chip = {
 void __init mxc_init_irq(void)
 {
 	int i;
-	u32 reg;
 
 	/* put the AVIC into the reset value with
 	 * all interrupts disabled
@@ -119,5 +142,10 @@ void __init mxc_init_irq(void)
 	/* init architectures chained interrupt handler */
 	mxc_register_gpios();
 
+#ifdef CONFIG_FIQ
+	/* Initialize FIQ */
+	init_FIQ();
+#endif
+
 	printk(KERN_INFO "MXC IRQ initialized\n");
 }

drivers/mmc/host/imxmmc.h

+#define MMC_REG_STR_STP_CLK		0x00
+#define MMC_REG_STATUS			0x04
+#define MMC_REG_CLK_RATE		0x08
+#define MMC_REG_CMD_DAT_CONT		0x0C
+#define MMC_REG_RES_TO			0x10
+#define MMC_REG_READ_TO			0x14
+#define MMC_REG_BLK_LEN			0x18
+#define MMC_REG_NOB			0x1C
+#define MMC_REG_REV_NO			0x20
+#define MMC_REG_INT_MASK		0x24
+#define MMC_REG_CMD			0x28
+#define MMC_REG_ARGH			0x2C
+#define MMC_REG_ARGL			0x30
+#define MMC_REG_RES_FIFO		0x34
+#define MMC_REG_BUFFER_ACCESS		0x38
 
-# define __REG16(x)	(*((volatile u16 *)IO_ADDRESS(x)))
-
-#define MMC_STR_STP_CLK  __REG16(IMX_MMC_BASE + 0x00)
-#define MMC_STATUS       __REG16(IMX_MMC_BASE + 0x04)
-#define MMC_CLK_RATE     __REG16(IMX_MMC_BASE + 0x08)
-#define MMC_CMD_DAT_CONT __REG16(IMX_MMC_BASE + 0x0C)
-#define MMC_RES_TO       __REG16(IMX_MMC_BASE + 0x10)
-#define MMC_READ_TO      __REG16(IMX_MMC_BASE + 0x14)
-#define MMC_BLK_LEN      __REG16(IMX_MMC_BASE + 0x18)
-#define MMC_NOB          __REG16(IMX_MMC_BASE + 0x1C)
-#define MMC_REV_NO       __REG16(IMX_MMC_BASE + 0x20)
-#define MMC_INT_MASK     __REG16(IMX_MMC_BASE + 0x24)
-#define MMC_CMD          __REG16(IMX_MMC_BASE + 0x28)
-#define MMC_ARGH         __REG16(IMX_MMC_BASE + 0x2C)
-#define MMC_ARGL         __REG16(IMX_MMC_BASE + 0x30)
-#define MMC_RES_FIFO     __REG16(IMX_MMC_BASE + 0x34)
-#define MMC_BUFFER_ACCESS __REG16(IMX_MMC_BASE + 0x38)
-#define MMC_BUFFER_ACCESS_OFS 0x38
-
-
+#define STR_STP_CLK_IPG_CLK_GATE_DIS    (1<<15)
+#define STR_STP_CLK_IPG_PERCLK_GATE_DIS (1<<14)
 #define STR_STP_CLK_ENDIAN              (1<<5)
 #define STR_STP_CLK_RESET               (1<<3)
 #define STR_STP_CLK_ENABLE              (1<<2)

drivers/mtd/nand/Kconfig

@@ -408,7 +408,7 @@ config MTD_NAND_FSL_UPM
 
 config MTD_NAND_MXC
 	tristate "MXC NAND support"
-	depends on ARCH_MX2
+	depends on ARCH_MX2 || ARCH_MX3
 	help
 	  This enables the driver for the NAND flash controller on the
 	  MXC processors.

drivers/serial/imx.c

@@ -66,7 +66,7 @@
 #define ONEMS 0xb0 /* One Millisecond register */
 #define UTS   0xb4 /* UART Test Register */
 #endif
-#ifdef CONFIG_ARCH_IMX
+#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
 #define BIPR1 0xb0 /* Incremental Preset Register 1 */
 #define BIPR2 0xb4 /* Incremental Preset Register 2 */
 #define BIPR3 0xb8 /* Incremental Preset Register 3 */
@@ -96,7 +96,7 @@
 #define  UCR1_RTSDEN     (1<<5)	 /* RTS delta interrupt enable */
 #define  UCR1_SNDBRK     (1<<4)	 /* Send break */
 #define  UCR1_TDMAEN     (1<<3)	 /* Transmitter ready DMA enable */
-#ifdef CONFIG_ARCH_IMX
+#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
 #define  UCR1_UARTCLKEN  (1<<2)	 /* UART clock enabled */
 #endif
 #if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
@@ -187,7 +187,7 @@
 #define MAX_INTERNAL_IRQ	IMX_IRQS
 #endif
 
-#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
+#ifdef CONFIG_ARCH_MXC
 #define SERIAL_IMX_MAJOR        207
 #define MINOR_START	        16
 #define DEV_NAME		"ttymxc"