Commit ca085fb9 authored by Hans Verkuil's avatar Hans Verkuil Committed by Mauro Carvalho Chehab

V4L/DVB (9834): wm8775: convert to v4l2_subdev.

Signed-off-by: default avatarHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent f1460e97
......@@ -32,7 +32,7 @@
#include <linux/i2c.h>
#include <linux/i2c-id.h>
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
#include <media/v4l2-device.h>
#include <media/v4l2-chip-ident.h>
#include <media/v4l2-i2c-drv-legacy.h>
......@@ -54,16 +54,23 @@ enum {
};
struct wm8775_state {
struct v4l2_subdev sd;
u8 input; /* Last selected input (0-0xf) */
u8 muted;
};
static int wm8775_write(struct i2c_client *client, int reg, u16 val)
static inline struct wm8775_state *to_state(struct v4l2_subdev *sd)
{
return container_of(sd, struct wm8775_state, sd);
}
static int wm8775_write(struct v4l2_subdev *sd, int reg, u16 val)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
int i;
if (reg < 0 || reg >= TOT_REGS) {
v4l_err(client, "Invalid register R%d\n", reg);
v4l2_err(sd, "Invalid register R%d\n", reg);
return -1;
}
......@@ -71,84 +78,117 @@ static int wm8775_write(struct i2c_client *client, int reg, u16 val)
if (i2c_smbus_write_byte_data(client,
(reg << 1) | (val >> 8), val & 0xff) == 0)
return 0;
v4l_err(client, "I2C: cannot write %03x to register R%d\n", val, reg);
v4l2_err(sd, "I2C: cannot write %03x to register R%d\n", val, reg);
return -1;
}
static int wm8775_command(struct i2c_client *client, unsigned cmd, void *arg)
static int wm8775_s_routing(struct v4l2_subdev *sd, const struct v4l2_routing *route)
{
struct wm8775_state *state = i2c_get_clientdata(client);
struct v4l2_routing *route = arg;
struct v4l2_control *ctrl = arg;
switch (cmd) {
case VIDIOC_INT_G_AUDIO_ROUTING:
route->input = state->input;
route->output = 0;
break;
struct wm8775_state *state = to_state(sd);
case VIDIOC_INT_S_AUDIO_ROUTING:
/* There are 4 inputs and one output. Zero or more inputs
are multiplexed together to the output. Hence there are
16 combinations.
If only one input is active (the normal case) then the
input values 1, 2, 4 or 8 should be used. */
if (route->input > 15) {
v4l_err(client, "Invalid input %d.\n", route->input);
v4l2_err(sd, "Invalid input %d.\n", route->input);
return -EINVAL;
}
state->input = route->input;
if (state->muted)
break;
wm8775_write(client, R21, 0x0c0);
wm8775_write(client, R14, 0x1d4);
wm8775_write(client, R15, 0x1d4);
wm8775_write(client, R21, 0x100 + state->input);
break;
case VIDIOC_G_CTRL:
return 0;
wm8775_write(sd, R21, 0x0c0);
wm8775_write(sd, R14, 0x1d4);
wm8775_write(sd, R15, 0x1d4);
wm8775_write(sd, R21, 0x100 + state->input);
return 0;
}
static int wm8775_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct wm8775_state *state = to_state(sd);
if (ctrl->id != V4L2_CID_AUDIO_MUTE)
return -EINVAL;
ctrl->value = state->muted;
break;
return 0;
}
static int wm8775_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct wm8775_state *state = to_state(sd);
case VIDIOC_S_CTRL:
if (ctrl->id != V4L2_CID_AUDIO_MUTE)
return -EINVAL;
state->muted = ctrl->value;
wm8775_write(client, R21, 0x0c0);
wm8775_write(client, R14, 0x1d4);
wm8775_write(client, R15, 0x1d4);
wm8775_write(sd, R21, 0x0c0);
wm8775_write(sd, R14, 0x1d4);
wm8775_write(sd, R15, 0x1d4);
if (!state->muted)
wm8775_write(client, R21, 0x100 + state->input);
break;
wm8775_write(sd, R21, 0x100 + state->input);
return 0;
}
case VIDIOC_G_CHIP_IDENT:
return v4l2_chip_ident_i2c_client(client,
arg, V4L2_IDENT_WM8775, 0);
static int wm8775_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_chip_ident *chip)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_WM8775, 0);
}
static int wm8775_log_status(struct v4l2_subdev *sd)
{
struct wm8775_state *state = to_state(sd);
case VIDIOC_LOG_STATUS:
v4l_info(client, "Input: %d%s\n", state->input,
v4l2_info(sd, "Input: %d%s\n", state->input,
state->muted ? " (muted)" : "");
break;
return 0;
}
static int wm8775_s_frequency(struct v4l2_subdev *sd, struct v4l2_frequency *freq)
{
struct wm8775_state *state = to_state(sd);
case VIDIOC_S_FREQUENCY:
/* If I remove this, then it can happen that I have no
sound the first time I tune from static to a valid channel.
It's difficult to reproduce and is almost certainly related
to the zero cross detect circuit. */
wm8775_write(client, R21, 0x0c0);
wm8775_write(client, R14, 0x1d4);
wm8775_write(client, R15, 0x1d4);
wm8775_write(client, R21, 0x100 + state->input);
break;
default:
return -EINVAL;
}
wm8775_write(sd, R21, 0x0c0);
wm8775_write(sd, R14, 0x1d4);
wm8775_write(sd, R15, 0x1d4);
wm8775_write(sd, R21, 0x100 + state->input);
return 0;
}
static int wm8775_command(struct i2c_client *client, unsigned cmd, void *arg)
{
return v4l2_subdev_command(i2c_get_clientdata(client), cmd, arg);
}
/* ----------------------------------------------------------------------- */
static const struct v4l2_subdev_core_ops wm8775_core_ops = {
.log_status = wm8775_log_status,
.g_chip_ident = wm8775_g_chip_ident,
.g_ctrl = wm8775_g_ctrl,
.s_ctrl = wm8775_s_ctrl,
};
static const struct v4l2_subdev_tuner_ops wm8775_tuner_ops = {
.s_frequency = wm8775_s_frequency,
};
static const struct v4l2_subdev_audio_ops wm8775_audio_ops = {
.s_routing = wm8775_s_routing,
};
static const struct v4l2_subdev_ops wm8775_ops = {
.core = &wm8775_core_ops,
.tuner = &wm8775_tuner_ops,
.audio = &wm8775_audio_ops,
};
/* ----------------------------------------------------------------------- */
/* i2c implementation */
......@@ -162,56 +202,61 @@ static int wm8775_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct wm8775_state *state;
struct v4l2_subdev *sd;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
v4l_info(client, "chip found @ 0x%x (%s)\n",
v4l_info(client, "chip found @ 0x%02x (%s)\n",
client->addr << 1, client->adapter->name);
state = kmalloc(sizeof(struct wm8775_state), GFP_KERNEL);
if (state == NULL)
return -ENOMEM;
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &wm8775_ops);
state->input = 2;
state->muted = 0;
i2c_set_clientdata(client, state);
/* Initialize wm8775 */
/* RESET */
wm8775_write(client, R23, 0x000);
wm8775_write(sd, R23, 0x000);
/* Disable zero cross detect timeout */
wm8775_write(client, R7, 0x000);
wm8775_write(sd, R7, 0x000);
/* Left justified, 24-bit mode */
wm8775_write(client, R11, 0x021);
wm8775_write(sd, R11, 0x021);
/* Master mode, clock ratio 256fs */
wm8775_write(client, R12, 0x102);
wm8775_write(sd, R12, 0x102);
/* Powered up */
wm8775_write(client, R13, 0x000);
wm8775_write(sd, R13, 0x000);
/* ADC gain +2.5dB, enable zero cross */
wm8775_write(client, R14, 0x1d4);
wm8775_write(sd, R14, 0x1d4);
/* ADC gain +2.5dB, enable zero cross */
wm8775_write(client, R15, 0x1d4);
wm8775_write(sd, R15, 0x1d4);
/* ALC Stereo, ALC target level -1dB FS max gain +8dB */
wm8775_write(client, R16, 0x1bf);
wm8775_write(sd, R16, 0x1bf);
/* Enable gain control, use zero cross detection,
ALC hold time 42.6 ms */
wm8775_write(client, R17, 0x185);
wm8775_write(sd, R17, 0x185);
/* ALC gain ramp up delay 34 s, ALC gain ramp down delay 33 ms */
wm8775_write(client, R18, 0x0a2);
wm8775_write(sd, R18, 0x0a2);
/* Enable noise gate, threshold -72dBfs */
wm8775_write(client, R19, 0x005);
wm8775_write(sd, R19, 0x005);
/* Transient window 4ms, lower PGA gain limit -1dB */
wm8775_write(client, R20, 0x07a);
wm8775_write(sd, R20, 0x07a);
/* LRBOTH = 1, use input 2. */
wm8775_write(client, R21, 0x102);
wm8775_write(sd, R21, 0x102);
return 0;
}
static int wm8775_remove(struct i2c_client *client)
{
kfree(i2c_get_clientdata(client));
struct v4l2_subdev *sd = i2c_get_clientdata(client);
v4l2_device_unregister_subdev(sd);
kfree(to_state(sd));
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment