Merge branch 'stmmac-fixes'

Giuseppe Cavallaro says:

====================
stmmac MDIO and normal descr fixes

This patch series is to fix the problems below and recently debugged
in this mailing list:

o to fix a problem for the HW where the normal descriptor
o to fix the mdio registration according to the different
  platform configurations

I am resending all the patches again: built on top of net.git repo.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/stmicro/stmmac/norm_desc.c

@@ -199,11 +199,6 @@ static void ndesc_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
 {
 	unsigned int tdes1 = p->des1;
 
-	if (mode == STMMAC_CHAIN_MODE)
-		norm_set_tx_desc_len_on_chain(p, len);
-	else
-		norm_set_tx_desc_len_on_ring(p, len);
-
 	if (is_fs)
 		tdes1 |= TDES1_FIRST_SEGMENT;
 	else
@@ -217,10 +212,15 @@ static void ndesc_prepare_tx_desc(struct dma_desc *p, int is_fs, int len,
 	if (ls)
 		tdes1 |= TDES1_LAST_SEGMENT;
 
-	if (tx_own)
-		tdes1 |= TDES0_OWN;
-
 	p->des1 = tdes1;
+
+	if (mode == STMMAC_CHAIN_MODE)
+		norm_set_tx_desc_len_on_chain(p, len);
+	else
+		norm_set_tx_desc_len_on_ring(p, len);
+
+	if (tx_own)
+		p->des0 |= TDES0_OWN;
 }
 
 static void ndesc_set_tx_ic(struct dma_desc *p)

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -278,7 +278,6 @@ static void stmmac_eee_ctrl_timer(unsigned long arg)
  */
 bool stmmac_eee_init(struct stmmac_priv *priv)
 {
-	char *phy_bus_name = priv->plat->phy_bus_name;
 	unsigned long flags;
 	bool ret = false;
 
@@ -290,7 +289,7 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
 		goto out;
 
 	/* Never init EEE in case of a switch is attached */
-	if (phy_bus_name && (!strcmp(phy_bus_name, "fixed")))
+	if (priv->phydev->is_pseudo_fixed_link)
 		goto out;
 
 	/* MAC core supports the EEE feature. */
@@ -827,10 +826,6 @@ static int stmmac_init_phy(struct net_device *dev)
 		phydev = of_phy_connect(dev, priv->plat->phy_node,
 					&stmmac_adjust_link, 0, interface);
 	} else {
-		if (priv->plat->phy_bus_name)
-			snprintf(bus_id, MII_BUS_ID_SIZE, "%s-%x",
-				 priv->plat->phy_bus_name, priv->plat->bus_id);
-		else
 		snprintf(bus_id, MII_BUS_ID_SIZE, "stmmac-%x",
 			 priv->plat->bus_id);
 
@@ -871,8 +866,7 @@ static int stmmac_init_phy(struct net_device *dev)
 	}
 
 	/* If attached to a switch, there is no reason to poll phy handler */
-	if (priv->plat->phy_bus_name)
-		if (!strcmp(priv->plat->phy_bus_name, "fixed"))
+	if (phydev->is_pseudo_fixed_link)
 		phydev->irq = PHY_IGNORE_INTERRUPT;
 
 	pr_debug("stmmac_init_phy:  %s: attached to PHY (UID 0x%x)"

drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c

@@ -198,20 +198,12 @@ int stmmac_mdio_register(struct net_device *ndev)
 	struct mii_bus *new_bus;
 	struct stmmac_priv *priv = netdev_priv(ndev);
 	struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
-	int addr, found;
 	struct device_node *mdio_node = priv->plat->mdio_node;
+	int addr, found;
 
 	if (!mdio_bus_data)
 		return 0;
 
-	if (IS_ENABLED(CONFIG_OF)) {
-		if (mdio_node) {
-			netdev_dbg(ndev, "FOUND MDIO subnode\n");
-		} else {
-			netdev_warn(ndev, "No MDIO subnode found\n");
-		}
-	}
-
 	new_bus = mdiobus_alloc();
 	if (new_bus == NULL)
 		return -ENOMEM;

drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c

@@ -131,6 +131,69 @@ static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev)
 	return axi;
 }
 
+/**
+ * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources
+ * @plat: driver data platform structure
+ * @np: device tree node
+ * @dev: device pointer
+ * Description:
+ * The mdio bus will be allocated in case of a phy transceiver is on board;
+ * it will be NULL if the fixed-link is configured.
+ * If there is the "snps,dwmac-mdio" sub-node the mdio will be allocated
+ * in any case (for DSA, mdio must be registered even if fixed-link).
+ * The table below sums the supported configurations:
+ *	-------------------------------
+ *	snps,phy-addr	|     Y
+ *	-------------------------------
+ *	phy-handle	|     Y
+ *	-------------------------------
+ *	fixed-link	|     N
+ *	-------------------------------
+ *	snps,dwmac-mdio	|
+ *	  even if	|     Y
+ *	fixed-link	|
+ *	-------------------------------
+ *
+ * It returns 0 in case of success otherwise -ENODEV.
+ */
+static int stmmac_dt_phy(struct plat_stmmacenet_data *plat,
+			 struct device_node *np, struct device *dev)
+{
+	bool mdio = true;
+
+	/* If phy-handle property is passed from DT, use it as the PHY */
+	plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
+	if (plat->phy_node)
+		dev_dbg(dev, "Found phy-handle subnode\n");
+
+	/* If phy-handle is not specified, check if we have a fixed-phy */
+	if (!plat->phy_node && of_phy_is_fixed_link(np)) {
+		if ((of_phy_register_fixed_link(np) < 0))
+			return -ENODEV;
+
+		dev_dbg(dev, "Found fixed-link subnode\n");
+		plat->phy_node = of_node_get(np);
+		mdio = false;
+	}
+
+	/* If snps,dwmac-mdio is passed from DT, always register the MDIO */
+	for_each_child_of_node(np, plat->mdio_node) {
+		if (of_device_is_compatible(plat->mdio_node, "snps,dwmac-mdio"))
+			break;
+	}
+
+	if (plat->mdio_node) {
+		dev_dbg(dev, "Found MDIO subnode\n");
+		mdio = true;
+	}
+
+	if (mdio)
+		plat->mdio_bus_data =
+			devm_kzalloc(dev, sizeof(struct stmmac_mdio_bus_data),
+				     GFP_KERNEL);
+	return 0;
+}
+
 /**
  * stmmac_probe_config_dt - parse device-tree driver parameters
  * @pdev: platform_device structure
@@ -146,7 +209,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 	struct device_node *np = pdev->dev.of_node;
 	struct plat_stmmacenet_data *plat;
 	struct stmmac_dma_cfg *dma_cfg;
-	struct device_node *child_node = NULL;
 
 	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
 	if (!plat)
@@ -166,36 +228,15 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
 	/* Default to phy auto-detection */
 	plat->phy_addr = -1;
 
-	/* If we find a phy-handle property, use it as the PHY */
-	plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
-
-	/* If phy-handle is not specified, check if we have a fixed-phy */
-	if (!plat->phy_node && of_phy_is_fixed_link(np)) {
-		if ((of_phy_register_fixed_link(np) < 0))
-			return ERR_PTR(-ENODEV);
-
-		plat->phy_node = of_node_get(np);
-	}
-
-	for_each_child_of_node(np, child_node)
-		if (of_device_is_compatible(child_node,	"snps,dwmac-mdio")) {
-			plat->mdio_node = child_node;
-			break;
-		}
-
 	/* "snps,phy-addr" is not a standard property. Mark it as deprecated
 	 * and warn of its use. Remove this when phy node support is added.
 	 */
 	if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0)
 		dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n");
 
-	if ((plat->phy_node && !of_phy_is_fixed_link(np)) || !plat->mdio_node)
-		plat->mdio_bus_data = NULL;
-	else
-		plat->mdio_bus_data =
-			devm_kzalloc(&pdev->dev,
-				     sizeof(struct stmmac_mdio_bus_data),
-				     GFP_KERNEL);
+	/* To Configure PHY by using all device-tree supported properties */
+	if (stmmac_dt_phy(plat, np, &pdev->dev))
+		return ERR_PTR(-ENODEV);
 
 	of_property_read_u32(np, "tx-fifo-depth", &plat->tx_fifo_size);
 

include/linux/stmmac.h

@@ -108,7 +108,6 @@ struct stmmac_axi {
 };
 
 struct plat_stmmacenet_data {
-	char *phy_bus_name;
 	int bus_id;
 	int phy_addr;
 	int interface;