Merge tag 'pwm/for-5.10-rc1' of...

Merge tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This release cycle's updates are mostly cleanup and some minor fixes"

* tag 'pwm/for-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  dt-bindings: pwm: renesas,pwm-rcar: Add r8a7742 support
  dt-bindings: pwm: renesas,tpu-pwm: Document r8a7742 support
  pwm: Allow store 64-bit duty cycle from sysfs interface
  pwm: img: Fix null pointer access in probe
  pwm: pca9685: Disable unused alternative addresses
  pwm: pca9685: Use BIT() macro instead of shift
  pwm: pca9685: Make comments more consistent
  pwm: sun4i: Simplify with dev_err_probe()
  pwm: sprd: Simplify with dev_err_probe()
  pwm: sifive: Simplify with dev_err_probe()
  pwm: rockchip: Simplify with dev_err_probe()
  pwm: jz4740: Simplify with dev_err_probe()
  pwm: bcm2835: Simplify with dev_err_probe()
  pwm: Convert to use DEFINE_SEQ_ATTRIBUTE macro
  pwm: rockchip: Keep enabled PWMs running while probing
  dt-bindings: pwm: renesas,pwm-rcar: Add r8a774e1 support

Documentation/devicetree/bindings/pwm/renesas,pwm-rcar.yaml

@@ -13,6 +13,7 @@ properties:
   compatible:
     items:
       - enum:
+          - renesas,pwm-r8a7742   # RZ/G1H
           - renesas,pwm-r8a7743   # RZ/G1M
           - renesas,pwm-r8a7744   # RZ/G1N
           - renesas,pwm-r8a7745   # RZ/G1E
@@ -20,6 +21,7 @@ properties:
           - renesas,pwm-r8a774a1  # RZ/G2M
           - renesas,pwm-r8a774b1  # RZ/G2N
           - renesas,pwm-r8a774c0  # RZ/G2E
+          - renesas,pwm-r8a774e1  # RZ/G2H
           - renesas,pwm-r8a7778   # R-Car M1A
           - renesas,pwm-r8a7779   # R-Car H1
           - renesas,pwm-r8a7790   # R-Car H2

Documentation/devicetree/bindings/pwm/renesas,tpu-pwm.yaml

@@ -15,6 +15,7 @@ properties:
       - enum:
           - renesas,tpu-r8a73a4   # R-Mobile APE6
           - renesas,tpu-r8a7740   # R-Mobile A1
+          - renesas,tpu-r8a7742   # RZ/G1H
           - renesas,tpu-r8a7743   # RZ/G1M
           - renesas,tpu-r8a7744   # RZ/G1N
           - renesas,tpu-r8a7745   # RZ/G1E

drivers/pwm/core.c

@@ -1327,30 +1327,19 @@ static int pwm_seq_show(struct seq_file *s, void *v)
 	return 0;
 }
 
-static const struct seq_operations pwm_seq_ops = {
+static const struct seq_operations pwm_debugfs_sops = {
 	.start = pwm_seq_start,
 	.next = pwm_seq_next,
 	.stop = pwm_seq_stop,
 	.show = pwm_seq_show,
 };
 
-static int pwm_seq_open(struct inode *inode, struct file *file)
-{
-	return seq_open(file, &pwm_seq_ops);
-}
-
-static const struct file_operations pwm_debugfs_ops = {
-	.owner = THIS_MODULE,
-	.open = pwm_seq_open,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = seq_release,
-};
+DEFINE_SEQ_ATTRIBUTE(pwm_debugfs);
 
 static int __init pwm_debugfs_init(void)
 {
 	debugfs_create_file("pwm", S_IFREG | S_IRUGO, NULL, NULL,
-			    &pwm_debugfs_ops);
+			    &pwm_debugfs_fops);
 
 	return 0;
 }

drivers/pwm/pwm-bcm2835.c

@@ -152,13 +152,9 @@ static int bcm2835_pwm_probe(struct platform_device *pdev)
 		return PTR_ERR(pc->base);
 
 	pc->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(pc->clk)) {
-		ret = PTR_ERR(pc->clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "clock not found: %d\n", ret);
-
-		return ret;
-	}
+	if (IS_ERR(pc->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk),
+				     "clock not found\n");
 
 	ret = clk_prepare_enable(pc->clk);
 	if (ret)

drivers/pwm/pwm-img.c

@@ -277,6 +277,8 @@ static int img_pwm_probe(struct platform_device *pdev)
 		return PTR_ERR(pwm->pwm_clk);
 	}
 
+	platform_set_drvdata(pdev, pwm);
+
 	pm_runtime_set_autosuspend_delay(&pdev->dev, IMG_PWM_PM_TIMEOUT);
 	pm_runtime_use_autosuspend(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);
@@ -313,7 +315,6 @@ static int img_pwm_probe(struct platform_device *pdev)
 		goto err_suspend;
 	}
 
-	platform_set_drvdata(pdev, pwm);
 	return 0;
 
 err_suspend:

drivers/pwm/pwm-jz4740.c

@@ -60,12 +60,9 @@ static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
 	snprintf(name, sizeof(name), "timer%u", pwm->hwpwm);
 
 	clk = clk_get(chip->dev, name);
-	if (IS_ERR(clk)) {
-		if (PTR_ERR(clk) != -EPROBE_DEFER)
-			dev_err(chip->dev, "Failed to get clock: %pe", clk);
-
-		return PTR_ERR(clk);
-	}
+	if (IS_ERR(clk))
+		return dev_err_probe(chip->dev, PTR_ERR(clk),
+				     "Failed to get clock\n");
 
 	err = clk_prepare_enable(clk);
 	if (err < 0) {

drivers/pwm/pwm-pca9685.c

@@ -57,10 +57,14 @@
 #define PCA9685_NUMREGS		0xFF
 #define PCA9685_MAXCHAN		0x10
 
-#define LED_FULL		(1 << 4)
-#define MODE1_SLEEP		(1 << 4)
-#define MODE2_INVRT		(1 << 4)
-#define MODE2_OUTDRV		(1 << 2)
+#define LED_FULL		BIT(4)
+#define MODE1_ALLCALL		BIT(0)
+#define MODE1_SUB3		BIT(1)
+#define MODE1_SUB2		BIT(2)
+#define MODE1_SUB1		BIT(3)
+#define MODE1_SLEEP		BIT(4)
+#define MODE2_INVRT		BIT(4)
+#define MODE2_OUTDRV		BIT(2)
 
 #define LED_N_ON_H(N)	(PCA9685_LEDX_ON_H + (4 * (N)))
 #define LED_N_ON_L(N)	(PCA9685_LEDX_ON_L + (4 * (N)))
@@ -91,7 +95,7 @@ static bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca, int pwm_idx)
 	mutex_lock(&pca->lock);
 	if (pwm_idx >= PCA9685_MAXCHAN) {
 		/*
-		 * "all LEDs" channel:
+		 * "All LEDs" channel:
 		 * pretend already in use if any of the PWMs are requested
 		 */
 		if (!bitmap_empty(pca->pwms_inuse, PCA9685_MAXCHAN)) {
@@ -100,7 +104,7 @@ static bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca, int pwm_idx)
 		}
 	} else {
 		/*
-		 * regular channel:
+		 * Regular channel:
 		 * pretend already in use if the "all LEDs" channel is requested
 		 */
 		if (test_bit(PCA9685_MAXCHAN, pca->pwms_inuse)) {
@@ -257,7 +261,7 @@ static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		if (prescale >= PCA9685_PRESCALE_MIN &&
 			prescale <= PCA9685_PRESCALE_MAX) {
 			/*
-			 * putting the chip briefly into SLEEP mode
+			 * Putting the chip briefly into SLEEP mode
 			 * at this point won't interfere with the
 			 * pm_runtime framework, because the pm_runtime
 			 * state is guaranteed active here.
@@ -443,8 +447,8 @@ static int pca9685_pwm_probe(struct i2c_client *client,
 				const struct i2c_device_id *id)
 {
 	struct pca9685 *pca;
+	unsigned int reg;
 	int ret;
-	int mode2;
 
 	pca = devm_kzalloc(&client->dev, sizeof(*pca), GFP_KERNEL);
 	if (!pca)
@@ -461,26 +465,31 @@ static int pca9685_pwm_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, pca);
 
-	regmap_read(pca->regmap, PCA9685_MODE2, &mode2);
+	regmap_read(pca->regmap, PCA9685_MODE2, &reg);
 
 	if (device_property_read_bool(&client->dev, "invert"))
-		mode2 |= MODE2_INVRT;
+		reg |= MODE2_INVRT;
 	else
-		mode2 &= ~MODE2_INVRT;
+		reg &= ~MODE2_INVRT;
 
 	if (device_property_read_bool(&client->dev, "open-drain"))
-		mode2 &= ~MODE2_OUTDRV;
+		reg &= ~MODE2_OUTDRV;
 	else
-		mode2 |= MODE2_OUTDRV;
+		reg |= MODE2_OUTDRV;
+
+	regmap_write(pca->regmap, PCA9685_MODE2, reg);
 
-	regmap_write(pca->regmap, PCA9685_MODE2, mode2);
+	/* Disable all LED ALLCALL and SUBx addresses to avoid bus collisions */
+	regmap_read(pca->regmap, PCA9685_MODE1, &reg);
+	reg &= ~(MODE1_ALLCALL | MODE1_SUB1 | MODE1_SUB2 | MODE1_SUB3);
+	regmap_write(pca->regmap, PCA9685_MODE1, reg);
 
-	/* clear all "full off" bits */
+	/* Clear all "full off" bits */
 	regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_L, 0);
 	regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_H, 0);
 
 	pca->chip.ops = &pca9685_pwm_ops;
-	/* add an extra channel for ALL_LED */
+	/* Add an extra channel for ALL_LED */
 	pca->chip.npwm = PCA9685_MAXCHAN + 1;
 
 	pca->chip.dev = &client->dev;
@@ -496,10 +505,10 @@ static int pca9685_pwm_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	/* the chip comes out of power-up in the active state */
+	/* The chip comes out of power-up in the active state */
 	pm_runtime_set_active(&client->dev);
 	/*
-	 * enable will put the chip into suspend, which is what we
+	 * Enable will put the chip into suspend, which is what we
 	 * want as all outputs are disabled at this point
 	 */
 	pm_runtime_enable(&client->dev);

drivers/pwm/pwm-rockchip.c

@@ -288,6 +288,7 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 	const struct of_device_id *id;
 	struct rockchip_pwm_chip *pc;
 	struct resource *r;
+	u32 enable_conf, ctrl;
 	int ret, count;
 
 	id = of_match_device(rockchip_pwm_dt_ids, &pdev->dev);
@@ -306,13 +307,9 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 	pc->clk = devm_clk_get(&pdev->dev, "pwm");
 	if (IS_ERR(pc->clk)) {
 		pc->clk = devm_clk_get(&pdev->dev, NULL);
-		if (IS_ERR(pc->clk)) {
-			ret = PTR_ERR(pc->clk);
-			if (ret != -EPROBE_DEFER)
-				dev_err(&pdev->dev, "Can't get bus clk: %d\n",
-					ret);
-			return ret;
-		}
+		if (IS_ERR(pc->clk))
+			return dev_err_probe(&pdev->dev, PTR_ERR(pc->clk),
+					     "Can't get bus clk\n");
 	}
 
 	count = of_count_phandle_with_args(pdev->dev.of_node,
@@ -362,7 +359,9 @@ static int rockchip_pwm_probe(struct platform_device *pdev)
 	}
 
 	/* Keep the PWM clk enabled if the PWM appears to be up and running. */
-	if (!pwm_is_enabled(pc->chip.pwms))
+	enable_conf = pc->data->enable_conf;
+	ctrl = readl_relaxed(pc->base + pc->data->regs.ctrl);
+	if ((ctrl & enable_conf) != enable_conf)
 		clk_disable(pc->clk);
 
 	return 0;

drivers/pwm/pwm-sifive.c

@@ -254,11 +254,9 @@ static int pwm_sifive_probe(struct platform_device *pdev)
 		return PTR_ERR(ddata->regs);
 
 	ddata->clk = devm_clk_get(dev, NULL);
-	if (IS_ERR(ddata->clk)) {
-		if (PTR_ERR(ddata->clk) != -EPROBE_DEFER)
-			dev_err(dev, "Unable to find controller clock\n");
-		return PTR_ERR(ddata->clk);
-	}
+	if (IS_ERR(ddata->clk))
+		return dev_err_probe(dev, PTR_ERR(ddata->clk),
+				     "Unable to find controller clock\n");
 
 	ret = clk_prepare_enable(ddata->clk);
 	if (ret) {

drivers/pwm/pwm-sprd.c

@@ -228,11 +228,8 @@ static int sprd_pwm_clk_init(struct sprd_pwm_chip *spc)
 			if (ret == -ENOENT)
 				break;
 
-			if (ret != -EPROBE_DEFER)
-				dev_err(spc->dev,
+			return dev_err_probe(spc->dev, ret,
 					     "failed to get channel clocks\n");
-
-			return ret;
 		}
 
 		clk_pwm = chn->clks[SPRD_PWM_CHN_OUTPUT_CLK].clk;

drivers/pwm/pwm-sun4i.c

@@ -423,38 +423,26 @@ static int sun4i_pwm_probe(struct platform_device *pdev)
 	 * back to the first clock of the PWM.
 	 */
 	pwm->clk = devm_clk_get_optional(&pdev->dev, "mod");
-	if (IS_ERR(pwm->clk)) {
-		if (PTR_ERR(pwm->clk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "get mod clock failed %pe\n",
-				pwm->clk);
-		return PTR_ERR(pwm->clk);
-	}
+	if (IS_ERR(pwm->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(pwm->clk),
+				     "get mod clock failed\n");
 
 	if (!pwm->clk) {
 		pwm->clk = devm_clk_get(&pdev->dev, NULL);
-		if (IS_ERR(pwm->clk)) {
-			if (PTR_ERR(pwm->clk) != -EPROBE_DEFER)
-				dev_err(&pdev->dev, "get unnamed clock failed %pe\n",
-					pwm->clk);
-			return PTR_ERR(pwm->clk);
-		}
+		if (IS_ERR(pwm->clk))
+			return dev_err_probe(&pdev->dev, PTR_ERR(pwm->clk),
+					     "get unnamed clock failed\n");
 	}
 
 	pwm->bus_clk = devm_clk_get_optional(&pdev->dev, "bus");
-	if (IS_ERR(pwm->bus_clk)) {
-		if (PTR_ERR(pwm->bus_clk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "get bus clock failed %pe\n",
-				pwm->bus_clk);
-		return PTR_ERR(pwm->bus_clk);
-	}
+	if (IS_ERR(pwm->bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(pwm->bus_clk),
+				     "get bus clock failed\n");
 
 	pwm->rst = devm_reset_control_get_optional_shared(&pdev->dev, NULL);
-	if (IS_ERR(pwm->rst)) {
-		if (PTR_ERR(pwm->rst) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "get reset failed %pe\n",
-				pwm->rst);
-		return PTR_ERR(pwm->rst);
-	}
+	if (IS_ERR(pwm->rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(pwm->rst),
+				     "get reset failed\n");
 
 	/* Deassert reset */
 	ret = reset_control_deassert(pwm->rst);

drivers/pwm/sysfs.c

@@ -87,10 +87,10 @@ static ssize_t duty_cycle_store(struct device *child,
 	struct pwm_export *export = child_to_pwm_export(child);
 	struct pwm_device *pwm = export->pwm;
 	struct pwm_state state;
-	unsigned int val;
+	u64 val;
 	int ret;
 
-	ret = kstrtouint(buf, 0, &val);
+	ret = kstrtou64(buf, 0, &val);
 	if (ret)
 		return ret;