MIPS: ingenic: DTS: Respect cell count of common properties

If N fields of X cells should be provided, then that's what the
devicetree should represent, instead of having one single field of
(N*X) cells.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

arch/mips/boot/dts/ingenic/jz4740.dtsi

@@ -55,10 +55,10 @@ tcu: timer@10002000 {
 
 		#clock-cells = <1>;
 
-		clocks = <&cgu JZ4740_CLK_RTC
-			  &cgu JZ4740_CLK_EXT
-			  &cgu JZ4740_CLK_PCLK
-			  &cgu JZ4740_CLK_TCU>;
+		clocks = <&cgu JZ4740_CLK_RTC>,
+			 <&cgu JZ4740_CLK_EXT>,
+			 <&cgu JZ4740_CLK_PCLK>,
+			 <&cgu JZ4740_CLK_TCU>;
 		clock-names = "rtc", "ext", "pclk", "tcu";
 
 		interrupt-controller;
@@ -241,10 +241,10 @@ nemc: memory-controller@13010000 {
 		reg = <0x13010000 0x54>;
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges = <1 0 0x18000000 0x4000000
-			  2 0 0x14000000 0x4000000
-			  3 0 0x0c000000 0x4000000
-			  4 0 0x08000000 0x4000000>;
+		ranges = <1 0 0x18000000 0x4000000>,
+			 <2 0 0x14000000 0x4000000>,
+			 <3 0 0x0c000000 0x4000000>,
+			 <4 0 0x08000000 0x4000000>;
 
 		clocks = <&cgu JZ4740_CLK_MCLK>;
 	};
@@ -258,8 +258,7 @@ ecc: ecc-controller@13010100 {
 
 	dmac: dma-controller@13020000 {
 		compatible = "ingenic,jz4740-dma";
-		reg = <0x13020000 0xbc
-		       0x13020300 0x14>;
+		reg = <0x13020000 0xbc>, <0x13020300 0x14>;
 		#dma-cells = <2>;
 
 		interrupt-parent = <&intc>;

arch/mips/boot/dts/ingenic/jz4770.dtsi

@@ -55,9 +55,9 @@ tcu: timer@10002000 {
 
 		#clock-cells = <1>;
 
-		clocks = <&cgu JZ4770_CLK_RTC
-			  &cgu JZ4770_CLK_EXT
-			  &cgu JZ4770_CLK_PCLK>;
+		clocks = <&cgu JZ4770_CLK_RTC>,
+			 <&cgu JZ4770_CLK_EXT>,
+			 <&cgu JZ4770_CLK_PCLK>;
 		clock-names = "rtc", "ext", "pclk";
 
 		interrupt-controller;
@@ -219,8 +219,7 @@ uart3: serial@10033000 {
 
 	dmac0: dma-controller@13420000 {
 		compatible = "ingenic,jz4770-dma";
-		reg = <0x13420000 0xC0
-		       0x13420300 0x20>;
+		reg = <0x13420000 0xC0>, <0x13420300 0x20>;
 
 		#dma-cells = <2>;
 
@@ -234,8 +233,7 @@ dmac0: dma-controller@13420000 {
 
 	dmac1: dma-controller@13420100 {
 		compatible = "ingenic,jz4770-dma";
-		reg = <0x13420100 0xC0
-		       0x13420400 0x20>;
+		reg = <0x13420100 0xC0>, <0x13420400 0x20>;
 
 		#dma-cells = <2>;
 

arch/mips/boot/dts/ingenic/jz4780.dtsi

@@ -58,9 +58,9 @@ tcu: timer@10002000 {
 
 		#clock-cells = <1>;
 
-		clocks = <&cgu JZ4780_CLK_RTCLK
-			  &cgu JZ4780_CLK_EXCLK
-			  &cgu JZ4780_CLK_PCLK>;
+		clocks = <&cgu JZ4780_CLK_RTCLK>,
+			 <&cgu JZ4780_CLK_EXCLK>,
+			 <&cgu JZ4780_CLK_PCLK>;
 		clock-names = "rtc", "ext", "pclk";
 
 		interrupt-controller;
@@ -196,8 +196,7 @@ spi_gpio {
 		gpio-miso = <&gpe 14 0>;
 		gpio-sck = <&gpe 15 0>;
 		gpio-mosi = <&gpe 17 0>;
-		cs-gpios = <&gpe 16 0
-			    &gpe 18 0>;
+		cs-gpios = <&gpe 16 0>, <&gpe 18 0>;
 
 		spidev@0 {
 			compatible = "spidev";
@@ -362,13 +361,13 @@ nemc: nemc@13410000 {
 		reg = <0x13410000 0x10000>;
 		#address-cells = <2>;
 		#size-cells = <1>;
-		ranges = <0 0 0x13410000 0x10000
-			  1 0 0x1b000000 0x1000000
-			  2 0 0x1a000000 0x1000000
-			  3 0 0x19000000 0x1000000
-			  4 0 0x18000000 0x1000000
-			  5 0 0x17000000 0x1000000
-			  6 0 0x16000000 0x1000000>;
+		ranges = <0 0 0x13410000 0x10000>,
+			 <1 0 0x1b000000 0x1000000>,
+			 <2 0 0x1a000000 0x1000000>,
+			 <3 0 0x19000000 0x1000000>,
+			 <4 0 0x18000000 0x1000000>,
+			 <5 0 0x17000000 0x1000000>,
+			 <6 0 0x16000000 0x1000000>;
 
 		clocks = <&cgu JZ4780_CLK_NEMC>;
 
@@ -391,8 +390,7 @@ eth0_addr: eth-mac-addr@0x22 {
 
 	dma: dma@13420000 {
 		compatible = "ingenic,jz4780-dma";
-		reg = <0x13420000 0x400
-		       0x13421000 0x40>;
+		reg = <0x13420000 0x400>, <0x13421000 0x40>;
 		#dma-cells = <2>;
 
 		interrupt-parent = <&intc>;

arch/mips/boot/dts/ingenic/x1000.dtsi

@@ -58,9 +58,9 @@ tcu: timer@10002000 {
 
 		#clock-cells = <1>;
 
-		clocks = <&cgu X1000_CLK_RTCLK
-			  &cgu X1000_CLK_EXCLK
-			  &cgu X1000_CLK_PCLK>;
+		clocks = <&cgu X1000_CLK_RTCLK>,
+			 <&cgu X1000_CLK_EXCLK>,
+			 <&cgu X1000_CLK_PCLK>;
 		clock-names = "rtc", "ext", "pclk";
 
 		interrupt-controller;
@@ -239,8 +239,7 @@ uart2: serial@10032000 {
 
 	pdma: dma-controller@13420000 {
 		compatible = "ingenic,x1000-dma";
-		reg = <0x13420000 0x400
-			   0x13421000 0x40>;
+		reg = <0x13420000 0x400>, <0x13421000 0x40>;
 		#dma-cells = <2>;
 
 		interrupt-parent = <&intc>;