Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (313 commits)
  V4L/DVB (9186): Added support for Prof 7300 DVB-S/S2 cards
  V4L/DVB (9185): S2API: Ensure we have a reasonable ROLLOFF default
  V4L/DVB (9184): cx24116: Change the default SNR units back to percentage by default.
  V4L/DVB (9183): S2API: Return error of the caller provides 0 commands.
  V4L/DVB (9182): S2API: Added support for DTV_HIERARCHY
  V4L/DVB (9181): S2API: Add support fot DTV_GUARD_INTERVAL and DTV_TRANSMISSION_MODE
  V4L/DVB (9180): S2API: Added support for DTV_CODE_RATE_HP/LP
  V4L/DVB (9179): S2API: frontend.h cleanup
  V4L/DVB (9178): cx24116: Add module parameter to return SNR as ESNO.
  V4L/DVB (9177): S2API: Change _8PSK / _16APSK to PSK_8 and APSK_16
  V4L/DVB (9176): Add support for DvbWorld USB cards with STV0288 demodulator.
  V4L/DVB (9175): Remove NULL pointer in stb6000 driver.
  V4L/DVB (9174): Allow custom inittab for ST STV0288 demodulator.
  V4L/DVB (9173): S2API: Remove the hardcoded command limit during validation
  V4L/DVB (9172): S2API: Bugfix related to DVB-S / DVB-S2 tuning for the legacy API.
  V4L/DVB (9171): S2API: Stop an OOPS if illegal commands are dumped in S2API.
  V4L/DVB (9170): cx24116: Sanity checking to data input via S2API to the cx24116 demod.
  V4L/DVB (9169): uvcvideo: Support two new Bison Electronics webcams.
  V4L/DVB (9168): Add support for MSI TV@nywhere Plus remote
  V4L/DVB: v4l2-dev: remove duplicated #include
  ...

Documentation/video4linux/CARDLIST.bttv

@@ -150,3 +150,4 @@
 149 -> Typhoon TV-Tuner PCI (50684)
 150 -> Geovision GV-600                                    [008a:763c]
 151 -> Kozumi KTV-01C
+152 -> Encore ENL TV-FM-2                                  [1000:1801]

Documentation/video4linux/CARDLIST.cx23885

@@ -9,3 +9,5 @@
   8 -> Hauppauge WinTV-HVR1700                             [0070:8101]
   9 -> Hauppauge WinTV-HVR1400                             [0070:8010]
  10 -> DViCO FusionHDTV7 Dual Express                      [18ac:d618]
+ 11 -> DViCO FusionHDTV DVB-T Dual Express                 [18ac:db78]
+ 12 -> Leadtek Winfast PxDVR3200 H                         [107d:6681]

Documentation/video4linux/CARDLIST.cx88

@@ -66,3 +66,11 @@
  65 -> DViCO FusionHDTV 7 Gold                             [18ac:d610]
  66 -> Prolink Pixelview MPEG 8000GT                       [1554:4935]
  67 -> Kworld PlusTV HD PCI 120 (ATSC 120)                 [17de:08c1]
+ 68 -> Hauppauge WinTV-HVR4000 DVB-S/S2/T/Hybrid           [0070:6900,0070:6904,0070:6902]
+ 69 -> Hauppauge WinTV-HVR4000(Lite) DVB-S/S2              [0070:6905,0070:6906]
+ 70 -> TeVii S460 DVB-S/S2                                 [d460:9022]
+ 71 -> Omicom SS4 DVB-S/S2 PCI                             [A044:2011]
+ 72 -> TBS 8920 DVB-S/S2                                   [8920:8888]
+ 73 -> TeVii S420 DVB-S                                    [d420:9022]
+ 74 -> Prolink Pixelview Global Extreme                    [1554:4976]
+ 75 -> PROF 7300 DVB-S/S2                                  [B033:3033]

Documentation/video4linux/CARDLIST.em28xx

   0 -> Unknown EM2800 video grabber             (em2800)        [eb1a:2800]
-  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2820,eb1a:2821,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
+  1 -> Unknown EM2750/28xx video grabber        (em2820/em2840) [eb1a:2820,eb1a:2860,eb1a:2861,eb1a:2870,eb1a:2881,eb1a:2883]
   2 -> Terratec Cinergy 250 USB                 (em2820/em2840) [0ccd:0036]
   3 -> Pinnacle PCTV USB 2                      (em2820/em2840) [2304:0208]
   4 -> Hauppauge WinTV USB 2                    (em2820/em2840) [2040:4200,2040:4201]
@@ -12,7 +12,7 @@
  11 -> Terratec Hybrid XS                       (em2880)        [0ccd:0042]
  12 -> Kworld PVR TV 2800 RF                    (em2820/em2840)
  13 -> Terratec Prodigy XS                      (em2880)        [0ccd:0047]
- 14 -> Pixelview Prolink PlayTV USB 2.0         (em2820/em2840)
+ 14 -> Pixelview Prolink PlayTV USB 2.0         (em2820/em2840) [eb1a:2821]
  15 -> V-Gear PocketTV                          (em2800)
  16 -> Hauppauge WinTV HVR 950                  (em2883)        [2040:6513,2040:6517,2040:651b,2040:651f]
  17 -> Pinnacle PCTV HD Pro Stick               (em2880)        [2304:0227]

Documentation/video4linux/CARDLIST.saa7134

@@ -76,7 +76,7 @@
  75 -> AVerMedia AVerTVHD MCE A180              [1461:1044]
  76 -> SKNet MonsterTV Mobile                   [1131:4ee9]
  77 -> Pinnacle PCTV 40i/50i/110i (saa7133)     [11bd:002e]
- 78 -> ASUSTeK P7131 Dual                       [1043:4862,1043:4857]
+ 78 -> ASUSTeK P7131 Dual                       [1043:4862]
  79 -> Sedna/MuchTV PC TV Cardbus TV/Radio (ITO25 Rev:2B)
  80 -> ASUS Digimatrix TV                       [1043:0210]
  81 -> Philips Tiger reference design           [1131:2018]
@@ -145,3 +145,9 @@
 144 -> Beholder BeholdTV M6 Extra               [5ace:6193]
 145 -> AVerMedia MiniPCI DVB-T Hybrid M103      [1461:f636]
 146 -> ASUSTeK P7131 Analog
+147 -> Asus Tiger 3in1                          [1043:4878]
+148 -> Encore ENLTV-FM v5.3                     [1a7f:2008]
+149 -> Avermedia PCI pure analog (M135A)        [1461:f11d]
+150 -> Zogis Real Angel 220
+151 -> ADS Tech Instant HDTV                    [1421:0380]
+152 -> Asus Tiger Rev:1.00                      [1043:4857]

Documentation/video4linux/CARDLIST.tuner

@@ -74,3 +74,4 @@ tuner=72 - Thomson FE6600
 tuner=73 - Samsung TCPG 6121P30A
 tuner=75 - Philips TEA5761 FM Radio
 tuner=76 - Xceive 5000 tuner
+tuner=77 - TCL tuner MF02GIP-5N-E

Documentation/video4linux/gspca.txt

@@ -7,6 +7,7 @@ The modules are:
 xxxx		vend:prod
 ----
 spca501		0000:0000	MystFromOri Unknow Camera
+m5602		0402:5602	ALi Video Camera Controller
 spca501		040a:0002	Kodak DVC-325
 spca500		040a:0300	Kodak EZ200
 zc3xx		041e:041e	Creative WebCam Live!
@@ -42,6 +43,7 @@ zc3xx		0458:7007	Genius VideoCam V2
 zc3xx		0458:700c	Genius VideoCam V3
 zc3xx		0458:700f	Genius VideoCam Web V2
 sonixj		0458:7025	Genius Eye 311Q
+sonixj		0458:702e	Genius Slim 310 NB
 sonixj		045e:00f5	MicroSoft VX3000
 sonixj		045e:00f7	MicroSoft VX1000
 ov519		045e:028c	Micro$oft xbox cam
@@ -81,7 +83,7 @@ spca561		046d:092b	Labtec Webcam Plus
 spca561		046d:092c	Logitech QC chat Elch2
 spca561		046d:092d	Logitech QC Elch2
 spca561		046d:092e	Logitech QC Elch2
-spca561		046d:092f	Logitech QC Elch2
+spca561		046d:092f	Logitech  QuickCam Express Plus
 sunplus		046d:0960	Logitech ClickSmart 420
 sunplus		0471:0322	Philips DMVC1300K
 zc3xx		0471:0325	Philips SPC 200 NC
@@ -96,6 +98,29 @@ sunplus		04a5:3003	Benq DC 1300
 sunplus		04a5:3008	Benq DC 1500
 sunplus		04a5:300a	Benq DC 3410
 spca500		04a5:300c	Benq DC 1016
+finepix		04cb:0104	Fujifilm FinePix 4800
+finepix		04cb:0109	Fujifilm FinePix A202
+finepix		04cb:010b	Fujifilm FinePix A203
+finepix		04cb:010f	Fujifilm FinePix A204
+finepix		04cb:0111	Fujifilm FinePix A205
+finepix		04cb:0113	Fujifilm FinePix A210
+finepix		04cb:0115	Fujifilm FinePix A303
+finepix		04cb:0117	Fujifilm FinePix A310
+finepix		04cb:0119	Fujifilm FinePix F401
+finepix		04cb:011b	Fujifilm FinePix F402
+finepix		04cb:011d	Fujifilm FinePix F410
+finepix		04cb:0121	Fujifilm FinePix F601
+finepix		04cb:0123	Fujifilm FinePix F700
+finepix		04cb:0125	Fujifilm FinePix M603
+finepix		04cb:0127	Fujifilm FinePix S300
+finepix		04cb:0129	Fujifilm FinePix S304
+finepix		04cb:012b	Fujifilm FinePix S500
+finepix		04cb:012d	Fujifilm FinePix S602
+finepix		04cb:012f	Fujifilm FinePix S700
+finepix		04cb:0131	Fujifilm FinePix unknown model
+finepix		04cb:013b	Fujifilm FinePix unknown model
+finepix		04cb:013d	Fujifilm FinePix unknown model
+finepix		04cb:013f	Fujifilm FinePix F420
 sunplus		04f1:1001	JVC GC A50
 spca561		04fc:0561	Flexcam 100
 sunplus		04fc:500c	Sunplus CA500C
@@ -181,6 +206,7 @@ pac207		093a:2468	PAC207
 pac207		093a:2470	Genius GF112
 pac207		093a:2471	Genius VideoCam ge111
 pac207		093a:2472	Genius VideoCam ge110
+pac207		093a:2476	Genius e-Messenger 112
 pac7311		093a:2600	PAC7311 Typhoon
 pac7311		093a:2601	Philips SPC 610 NC
 pac7311		093a:2603	PAC7312

Documentation/video4linux/m5602.txt

+This document describes the ALi m5602 bridge connected
+to the following supported sensors:
+OmniVision OV9650,
+Samsung s5k83a,
+Samsung s5k4aa,
+Micron mt9m111,
+Pixel plus PO1030
+
+This driver mimics the windows drivers, which have a braindead implementation sending bayer-encoded frames at VGA resolution.
+In a perfect world we should be able to reprogram the m5602 and the connected sensor in hardware instead, supporting a range of resolutions and pixelformats
+
+Anyway, have fun and please report any bugs to m560x-driver-devel@lists.sourceforge.net

Documentation/video4linux/soc-camera.txt

+			Soc-Camera Subsystem
+			====================
+
+Terminology
+-----------
+
+The following terms are used in this document:
+ - camera / camera device / camera sensor - a video-camera sensor chip, capable
+   of connecting to a variety of systems and interfaces, typically uses i2c for
+   control and configuration, and a parallel or a serial bus for data.
+ - camera host - an interface, to which a camera is connected. Typically a
+   specialised interface, present on many SoCs, e.g., PXA27x and PXA3xx, SuperH,
+   AVR32, i.MX27, i.MX31.
+ - camera host bus - a connection between a camera host and a camera. Can be
+   parallel or serial, consists of data and control lines, e.g., clock, vertical
+   and horizontal synchronization signals.
+
+Purpose of the soc-camera subsystem
+-----------------------------------
+
+The soc-camera subsystem provides a unified API between camera host drivers and
+camera sensor drivers. It implements a V4L2 interface to the user, currently
+only the mmap method is supported.
+
+This subsystem has been written to connect drivers for System-on-Chip (SoC)
+video capture interfaces with drivers for CMOS camera sensor chips to enable
+the reuse of sensor drivers with various hosts. The subsystem has been designed
+to support multiple camera host interfaces and multiple cameras per interface,
+although most applications have only one camera sensor.
+
+Existing drivers
+----------------
+
+As of 2.6.27-rc4 there are two host drivers in the mainline: pxa_camera.c for
+PXA27x SoCs and sh_mobile_ceu_camera.c for SuperH SoCs, and four sensor drivers:
+mt9m001.c, mt9m111.c, mt9v022.c and a generic soc_camera_platform.c driver. This
+list is not supposed to be updated, look for more examples in your tree.
+
+Camera host API
+---------------
+
+A host camera driver is registered using the
+
+soc_camera_host_register(struct soc_camera_host *);
+
+function. The host object can be initialized as follows:
+
+static struct soc_camera_host pxa_soc_camera_host = {
+	.drv_name	= PXA_CAM_DRV_NAME,
+	.ops		= &pxa_soc_camera_host_ops,
+};
+
+All camera host methods are passed in a struct soc_camera_host_ops:
+
+static struct soc_camera_host_ops pxa_soc_camera_host_ops = {
+	.owner		= THIS_MODULE,
+	.add		= pxa_camera_add_device,
+	.remove		= pxa_camera_remove_device,
+	.suspend	= pxa_camera_suspend,
+	.resume		= pxa_camera_resume,
+	.set_fmt_cap	= pxa_camera_set_fmt_cap,
+	.try_fmt_cap	= pxa_camera_try_fmt_cap,
+	.init_videobuf	= pxa_camera_init_videobuf,
+	.reqbufs	= pxa_camera_reqbufs,
+	.poll		= pxa_camera_poll,
+	.querycap	= pxa_camera_querycap,
+	.try_bus_param	= pxa_camera_try_bus_param,
+	.set_bus_param	= pxa_camera_set_bus_param,
+};
+
+.add and .remove methods are called when a sensor is attached to or detached
+from the host, apart from performing host-internal tasks they shall also call
+sensor driver's .init and .release methods respectively. .suspend and .resume
+methods implement host's power-management functionality and its their
+responsibility to call respective sensor's methods. .try_bus_param and
+.set_bus_param are used to negotiate physical connection parameters between the
+host and the sensor. .init_videobuf is called by soc-camera core when a
+video-device is opened, further video-buffer management is implemented completely
+by the specific camera host driver. The rest of the methods are called from
+respective V4L2 operations.
+
+Camera API
+----------
+
+Sensor drivers can use struct soc_camera_link, typically provided by the
+platform, and used to specify to which camera host bus the sensor is connected,
+and arbitrarily provide platform .power and .reset methods for the camera.
+soc_camera_device_register() and soc_camera_device_unregister() functions are
+used to add a sensor driver to or remove one from the system. The registration
+function takes a pointer to struct soc_camera_device as the only parameter.
+This struct can be initialized as follows:
+
+	/* link to driver operations */
+	icd->ops	= &mt9m001_ops;
+	/* link to the underlying physical (e.g., i2c) device */
+	icd->control	= &client->dev;
+	/* window geometry */
+	icd->x_min	= 20;
+	icd->y_min	= 12;
+	icd->x_current	= 20;
+	icd->y_current	= 12;
+	icd->width_min	= 48;
+	icd->width_max	= 1280;
+	icd->height_min	= 32;
+	icd->height_max	= 1024;
+	icd->y_skip_top	= 1;
+	/* camera bus ID, typically obtained from platform data */
+	icd->iface	= icl->bus_id;
+
+struct soc_camera_ops provides .probe and .remove methods, which are called by
+the soc-camera core, when a camera is matched against or removed from a camera
+host bus, .init, .release, .suspend, and .resume are called from the camera host
+driver as discussed above. Other members of this struct provide respective V4L2
+functionality.
+
+struct soc_camera_device also links to an array of struct soc_camera_data_format,
+listing pixel formats, supported by the camera.
+
+--
+Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

arch/arm/mach-pxa/include/mach/camera.h

@@ -36,8 +36,6 @@
 
 struct pxacamera_platform_data {
 	int (*init)(struct device *);
-	int (*power)(struct device *, int);
-	int (*reset)(struct device *, int);
 
 	unsigned long flags;
 	unsigned long mclk_10khz;

drivers/media/common/ir-keymaps.c

@@ -103,6 +103,56 @@ IR_KEYTAB_TYPE ir_codes_avermedia_dvbt[IR_KEYTAB_SIZE] = {
 
 EXPORT_SYMBOL_GPL(ir_codes_avermedia_dvbt);
 
+/* Mauro Carvalho Chehab <mchehab@infradead.org> */
+IR_KEYTAB_TYPE ir_codes_avermedia_m135a[IR_KEYTAB_SIZE] = {
+	[0x00] = KEY_POWER2,
+	[0x2e] = KEY_DOT,		/* '.' */
+	[0x01] = KEY_MODE,		/* TV/FM */
+
+	[0x05] = KEY_1,
+	[0x06] = KEY_2,
+	[0x07] = KEY_3,
+	[0x09] = KEY_4,
+	[0x0a] = KEY_5,
+	[0x0b] = KEY_6,
+	[0x0d] = KEY_7,
+	[0x0e] = KEY_8,
+	[0x0f] = KEY_9,
+	[0x11] = KEY_0,
+
+	[0x13] = KEY_RIGHT,		/* -> */
+	[0x12] = KEY_LEFT,		/* <- */
+
+	[0x17] = KEY_SLEEP,		/* Capturar Imagem */
+	[0x10] = KEY_SHUFFLE,		/* Amostra */
+
+	/* FIXME: The keys bellow aren't ok */
+
+	[0x43] = KEY_CHANNELUP,
+	[0x42] = KEY_CHANNELDOWN,
+	[0x1f] = KEY_VOLUMEUP,
+	[0x1e] = KEY_VOLUMEDOWN,
+	[0x0c] = KEY_ENTER,
+
+	[0x14] = KEY_MUTE,
+	[0x08] = KEY_AUDIO,
+
+	[0x03] = KEY_TEXT,
+	[0x04] = KEY_EPG,
+	[0x2b] = KEY_TV2,		/* TV2 */
+
+	[0x1d] = KEY_RED,
+	[0x1c] = KEY_YELLOW,
+	[0x41] = KEY_GREEN,
+	[0x40] = KEY_BLUE,
+
+	[0x1a] = KEY_PLAYPAUSE,
+	[0x19] = KEY_RECORD,
+	[0x18] = KEY_PLAY,
+	[0x1b] = KEY_STOP,
+};
+EXPORT_SYMBOL_GPL(ir_codes_avermedia_m135a);
+
 /* Attila Kondoros <attila.kondoros@chello.hu> */
 IR_KEYTAB_TYPE ir_codes_apac_viewcomp[IR_KEYTAB_SIZE] = {
 
@@ -467,7 +517,8 @@ EXPORT_SYMBOL_GPL(ir_codes_adstech_dvb_t_pci);
 
 /* ---------------------------------------------------------------------- */
 
-/* MSI TV@nywhere remote */
+/* MSI TV@nywhere MASTER remote */
+
 IR_KEYTAB_TYPE ir_codes_msi_tvanywhere[IR_KEYTAB_SIZE] = {
 	/* Keys 0 to 9 */
 	[ 0x00 ] = KEY_0,
@@ -501,6 +552,95 @@ EXPORT_SYMBOL_GPL(ir_codes_msi_tvanywhere);
 
 /* ---------------------------------------------------------------------- */
 
+/*
+  Keycodes for remote on the MSI TV@nywhere Plus. The controller IC on the card
+  is marked "KS003". The controller is I2C at address 0x30, but does not seem
+  to respond to probes until a read is performed from a valid device.
+  I don't know why...
+
+  Note: This remote may be of similar or identical design to the
+  Pixelview remote (?).  The raw codes and duplicate button codes
+  appear to be the same.
+
+  Henry Wong <henry@stuffedcow.net>
+  Some changes to formatting and keycodes by Mark Schultz <n9xmj@yahoo.com>
+
+*/
+
+IR_KEYTAB_TYPE ir_codes_msi_tvanywhere_plus[IR_KEYTAB_SIZE] = {
+
+/*  ---- Remote Button Layout ----
+
+    POWER   SOURCE  SCAN    MUTE
+    TV/FM   1       2       3
+    |>      4       5       6
+    <|      7       8       9
+    ^^UP    0       +       RECALL
+    vvDN    RECORD  STOP    PLAY
+
+	MINIMIZE          ZOOM
+
+		  CH+
+      VOL-                   VOL+
+		  CH-
+
+	SNAPSHOT           MTS
+
+     <<      FUNC    >>     RESET
+*/
+
+	[0x01] = KEY_KP1,             /* 1 */
+	[0x0b] = KEY_KP2,             /* 2 */
+	[0x1b] = KEY_KP3,             /* 3 */
+	[0x05] = KEY_KP4,             /* 4 */
+	[0x09] = KEY_KP5,             /* 5 */
+	[0x15] = KEY_KP6,             /* 6 */
+	[0x06] = KEY_KP7,             /* 7 */
+	[0x0a] = KEY_KP8,             /* 8 */
+	[0x12] = KEY_KP9,             /* 9 */
+	[0x02] = KEY_KP0,             /* 0 */
+	[0x10] = KEY_KPPLUS,          /* + */
+	[0x13] = KEY_AGAIN,           /* Recall */
+
+	[0x1e] = KEY_POWER,           /* Power */
+	[0x07] = KEY_TUNER,           /* Source */
+	[0x1c] = KEY_SEARCH,          /* Scan */
+	[0x18] = KEY_MUTE,            /* Mute */
+
+	[0x03] = KEY_RADIO,           /* TV/FM */
+	/* The next four keys are duplicates that appear to send the
+	   same IR code as Ch+, Ch-, >>, and << .  The raw code assigned
+	   to them is the actual code + 0x20 - they will never be
+	   detected as such unless some way is discovered to distinguish
+	   these buttons from those that have the same code. */
+	[0x3f] = KEY_RIGHT,           /* |> and Ch+ */
+	[0x37] = KEY_LEFT,            /* <| and Ch- */
+	[0x2c] = KEY_UP,              /* ^^Up and >> */
+	[0x24] = KEY_DOWN,            /* vvDn and << */
+
+	[0x00] = KEY_RECORD,          /* Record */
+	[0x08] = KEY_STOP,            /* Stop */
+	[0x11] = KEY_PLAY,            /* Play */
+
+	[0x0f] = KEY_CLOSE,           /* Minimize */
+	[0x19] = KEY_ZOOM,            /* Zoom */
+	[0x1a] = KEY_SHUFFLE,         /* Snapshot */
+	[0x0d] = KEY_LANGUAGE,        /* MTS */
+
+	[0x14] = KEY_VOLUMEDOWN,      /* Vol- */
+	[0x16] = KEY_VOLUMEUP,        /* Vol+ */
+	[0x17] = KEY_CHANNELDOWN,     /* Ch- */
+	[0x1f] = KEY_CHANNELUP,       /* Ch+ */
+
+	[0x04] = KEY_REWIND,          /* << */
+	[0x0e] = KEY_MENU,            /* Function */
+	[0x0c] = KEY_FASTFORWARD,     /* >> */
+	[0x1d] = KEY_RESTART,         /* Reset */
+};
+EXPORT_SYMBOL_GPL(ir_codes_msi_tvanywhere_plus);
+
+/* ---------------------------------------------------------------------- */
+
 /* Cinergy 1400 DVB-T */
 IR_KEYTAB_TYPE ir_codes_cinergy_1400[IR_KEYTAB_SIZE] = {
 	[ 0x01 ] = KEY_POWER,
@@ -1792,12 +1932,61 @@ IR_KEYTAB_TYPE ir_codes_encore_enltv[IR_KEYTAB_SIZE] = {
 	[ 0x41 ] = KEY_GREEN,		/* AP2 */
 	[ 0x47 ] = KEY_YELLOW,		/* AP3 */
 	[ 0x57 ] = KEY_BLUE,		/* AP4 */
-
-
 };
-
 EXPORT_SYMBOL_GPL(ir_codes_encore_enltv);
 
+/* Encore ENLTV2-FM  - silver plastic - "Wand Media" written at the botton
+    Mauro Carvalho Chehab <mchehab@infradead.org> */
+IR_KEYTAB_TYPE ir_codes_encore_enltv2[IR_KEYTAB_SIZE] = {
+	[0x4c] = KEY_POWER2,
+	[0x4a] = KEY_TUNER,
+	[0x40] = KEY_1,
+	[0x60] = KEY_2,
+	[0x50] = KEY_3,
+	[0x70] = KEY_4,
+	[0x48] = KEY_5,
+	[0x68] = KEY_6,
+	[0x58] = KEY_7,
+	[0x78] = KEY_8,
+	[0x44] = KEY_9,
+	[0x54] = KEY_0,
+
+	[0x64] = KEY_LAST,		/* +100 */
+	[0x4e] = KEY_AGAIN,		/* Recall */
+
+	[0x6c] = KEY_SWITCHVIDEOMODE,	/* Video Source */
+	[0x5e] = KEY_MENU,
+	[0x56] = KEY_SCREEN,
+	[0x7a] = KEY_SETUP,
+
+	[0x46] = KEY_MUTE,
+	[0x5c] = KEY_MODE,		/* Stereo */
+	[0x74] = KEY_INFO,
+	[0x7c] = KEY_CLEAR,
+
+	[0x55] = KEY_UP,
+	[0x49] = KEY_DOWN,
+	[0x7e] = KEY_LEFT,
+	[0x59] = KEY_RIGHT,
+	[0x6a] = KEY_ENTER,
+
+	[0x42] = KEY_VOLUMEUP,
+	[0x62] = KEY_VOLUMEDOWN,
+	[0x52] = KEY_CHANNELUP,
+	[0x72] = KEY_CHANNELDOWN,
+
+	[0x41] = KEY_RECORD,
+	[0x51] = KEY_SHUFFLE,	/* Snapshot */
+	[0x75] = KEY_TIME,	/* Timeshift */
+	[0x71] = KEY_TV2,	/* PIP */
+
+	[0x45] = KEY_REWIND,
+	[0x6f] = KEY_PAUSE,
+	[0x7d] = KEY_FORWARD,
+	[0x79] = KEY_STOP,
+};
+EXPORT_SYMBOL_GPL(ir_codes_encore_enltv2);
+
 /* for the Technotrend 1500 bundled remotes (grey and black): */
 IR_KEYTAB_TYPE ir_codes_tt_1500[IR_KEYTAB_SIZE] = {
 	[ 0x01 ] = KEY_POWER,
@@ -2239,3 +2428,86 @@ IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE] = {
 	[0x2a] = KEY_MENU,
 };
 EXPORT_SYMBOL_GPL(ir_codes_avermedia_a16d);
+
+/* Encore ENLTV-FM v5.3
+   Mauro Carvalho Chehab <mchehab@infradead.org>
+ */
+IR_KEYTAB_TYPE ir_codes_encore_enltv_fm53[IR_KEYTAB_SIZE] = {
+	[0x10] = KEY_POWER2,
+	[0x06] = KEY_MUTE,
+
+	[0x09] = KEY_1,
+	[0x1d] = KEY_2,
+	[0x1f] = KEY_3,
+	[0x19] = KEY_4,
+	[0x1b] = KEY_5,
+	[0x11] = KEY_6,
+	[0x17] = KEY_7,
+	[0x12] = KEY_8,
+	[0x16] = KEY_9,
+	[0x48] = KEY_0,
+
+	[0x04] = KEY_LIST,		/* -/-- */
+	[0x40] = KEY_LAST,		/* recall */
+
+	[0x02] = KEY_MODE,		/* TV/AV */
+	[0x05] = KEY_SHUFFLE,		/* SNAPSHOT */
+
+	[0x4c] = KEY_CHANNELUP,		/* UP */
+	[0x00] = KEY_CHANNELDOWN,	/* DOWN */
+	[0x0d] = KEY_VOLUMEUP,		/* RIGHT */
+	[0x15] = KEY_VOLUMEDOWN,	/* LEFT */
+	[0x49] = KEY_ENTER,		/* OK */
+
+	[0x54] = KEY_RECORD,
+	[0x4d] = KEY_PLAY,		/* pause */
+
+	[0x1e] = KEY_UP,		/* video setting */
+	[0x0e] = KEY_RIGHT,		/* <- */
+	[0x1a] = KEY_LEFT,		/* -> */
+
+	[0x0a] = KEY_DOWN,		/* video default */
+	[0x0c] = KEY_ZOOM,		/* hide pannel */
+	[0x47] = KEY_SLEEP,		/* shutdown */
+};
+EXPORT_SYMBOL_GPL(ir_codes_encore_enltv_fm53);
+
+/* Zogis Real Audio 220 - 32 keys IR */
+IR_KEYTAB_TYPE ir_codes_real_audio_220_32_keys[IR_KEYTAB_SIZE] = {
+	[0x1c] = KEY_RADIO,
+	[0x12] = KEY_POWER2,
+
+	[0x01] = KEY_1,
+	[0x02] = KEY_2,
+	[0x03] = KEY_3,
+	[0x04] = KEY_4,
+	[0x05] = KEY_5,
+	[0x06] = KEY_6,
+	[0x07] = KEY_7,
+	[0x08] = KEY_8,
+	[0x09] = KEY_9,
+	[0x00] = KEY_0,
+
+	[0x0c] = KEY_VOLUMEUP,
+	[0x18] = KEY_VOLUMEDOWN,
+	[0x0b] = KEY_CHANNELUP,
+	[0x15] = KEY_CHANNELDOWN,
+	[0x16] = KEY_ENTER,
+
+	[0x11] = KEY_LIST,		/* Source */
+	[0x0d] = KEY_AUDIO,		/* stereo */
+
+	[0x0f] = KEY_PREVIOUS,		/* Prev */
+	[0x1b] = KEY_PAUSE,		/* Timeshift */
+	[0x1a] = KEY_NEXT,		/* Next */
+
+	[0x0e] = KEY_STOP,
+	[0x1f] = KEY_PLAY,
+	[0x1e] = KEY_PLAYPAUSE,		/* Pause */
+
+	[0x1d] = KEY_RECORD,
+	[0x13] = KEY_MUTE,
+	[0x19] = KEY_SHUFFLE,		/* Snapshot */
+
+};
+EXPORT_SYMBOL_GPL(ir_codes_real_audio_220_32_keys);

drivers/media/common/saa7146_core.c

@@ -234,7 +234,7 @@ void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt)
 int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt)
 {
 	__le32       *cpu;
-	dma_addr_t   dma_addr;
+	dma_addr_t   dma_addr = 0;
 
 	cpu = pci_alloc_consistent(pci, PAGE_SIZE, &dma_addr);
 	if (NULL == cpu) {

drivers/media/common/saa7146_fops.c

@@ -533,7 +533,7 @@ int saa7146_register_device(struct video_device **vid, struct saa7146_dev* dev,
 	memcpy(vfd, &device_template, sizeof(struct video_device));
 	strlcpy(vfd->name, name, sizeof(vfd->name));
 	vfd->release = video_device_release;
-	vfd->priv = dev;
+	video_set_drvdata(vfd, dev);
 
 	// fixme: -1 should be an insmod parameter *for the extension* (like "video_nr");
 	if (video_register_device(vfd, type, -1) < 0) {

drivers/media/common/tuners/mt2060.c

@@ -170,6 +170,9 @@ static int mt2060_set_params(struct dvb_frontend *fe, struct dvb_frontend_parame
 	b[0] = REG_LO1B1;
 	b[1] = 0xFF;
 
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
 	mt2060_writeregs(priv,b,2);
 
 	freq = params->frequency / 1000; // Hz -> kHz
@@ -233,6 +236,9 @@ static int mt2060_set_params(struct dvb_frontend *fe, struct dvb_frontend_parame
 		i++;
 	} while (i<10);
 
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
 	return ret;
 }
 
@@ -296,13 +302,35 @@ static int mt2060_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
 static int mt2060_init(struct dvb_frontend *fe)
 {
 	struct mt2060_priv *priv = fe->tuner_priv;
-	return mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x33);
+	int ret;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
+	ret = mt2060_writereg(priv, REG_VGAG,
+			      (priv->cfg->clock_out << 6) | 0x33);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
+	return ret;
 }
 
 static int mt2060_sleep(struct dvb_frontend *fe)
 {
 	struct mt2060_priv *priv = fe->tuner_priv;
-	return mt2060_writereg(priv, REG_VGAG, (priv->cfg->clock_out << 6) | 0x30);
+	int ret;
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
+	ret = mt2060_writereg(priv, REG_VGAG,
+			      (priv->cfg->clock_out << 6) | 0x30);
+
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
+	return ret;
 }
 
 static int mt2060_release(struct dvb_frontend *fe)
@@ -344,6 +372,9 @@ struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter
 	priv->i2c      = i2c;
 	priv->if1_freq = if1;
 
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
+
 	if (mt2060_readreg(priv,REG_PART_REV,&id) != 0) {
 		kfree(priv);
 		return NULL;
@@ -360,6 +391,9 @@ struct dvb_frontend * mt2060_attach(struct dvb_frontend *fe, struct i2c_adapter
 
 	mt2060_calibrate(priv);
 
+	if (fe->ops.i2c_gate_ctrl)
+		fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
+
 	return fe;
 }
 EXPORT_SYMBOL(mt2060_attach);

drivers/media/common/tuners/mxl5007t.c

@@ -979,7 +979,6 @@ struct dvb_frontend *mxl5007t_attach(struct dvb_frontend *fe,
 	switch (instance) {
 	case 0:
 		goto fail;
-		break;
 	case 1:
 		/* new tuner instance */
 		state->config = cfg;

drivers/media/common/tuners/tda18271-fe.c

@@ -1155,7 +1155,6 @@ struct dvb_frontend *tda18271_attach(struct dvb_frontend *fe, u8 addr,
 	switch (instance) {
 	case 0:
 		goto fail;
-		break;
 	case 1:
 		/* new tuner instance */
 		priv->gate = (cfg) ? cfg->gate : TDA18271_GATE_AUTO;

drivers/media/common/tuners/tda827x.c

@@ -447,8 +447,9 @@ static void tda827xa_lna_gain(struct dvb_frontend *fe, int high,
 			else
 				arg = 0;
 		}
-		if (priv->cfg->tuner_callback)
-			priv->cfg->tuner_callback(priv->i2c_adap->algo_data,
+		if (fe->callback)
+			fe->callback(priv->i2c_adap->algo_data,
+				     DVB_FRONTEND_COMPONENT_TUNER,
 				     gp_func, arg);
 		buf[1] = high ? 0 : 1;
 		if (priv->cfg->config == 2)
@@ -456,8 +457,9 @@ static void tda827xa_lna_gain(struct dvb_frontend *fe, int high,
 		i2c_transfer(priv->i2c_adap, &msg, 1);
 		break;
 	case 3: /* switch with GPIO of saa713x */
-		if (priv->cfg->tuner_callback)
-			priv->cfg->tuner_callback(priv->i2c_adap->algo_data, 0, high);
+		if (fe->callback)
+			fe->callback(priv->i2c_adap->algo_data,
+				     DVB_FRONTEND_COMPONENT_TUNER, 0, high);
 		break;
 	}
 }

drivers/media/common/tuners/tda827x.h

@@ -36,7 +36,6 @@ struct tda827x_config
 	/* interface to tda829x driver */
 	unsigned int config;
 	int 	     switch_addr;
-	int (*tuner_callback) (void *dev, int command, int arg);
 
 	void (*agcf)(struct dvb_frontend *fe);
 };

drivers/media/common/tuners/tda8290.c

@@ -672,10 +672,8 @@ struct dvb_frontend *tda829x_attach(struct dvb_frontend *fe,
 	priv->i2c_props.addr     = i2c_addr;
 	priv->i2c_props.adap     = i2c_adap;
 	priv->i2c_props.name     = "tda829x";
-	if (cfg) {
+	if (cfg)
 		priv->cfg.config         = cfg->lna_cfg;
-		priv->cfg.tuner_callback = cfg->tuner_callback;
-	}
 
 	if (tda8290_probe(&priv->i2c_props) == 0) {
 		priv->ver = TDA8290;

drivers/media/common/tuners/tda8290.h

@@ -22,7 +22,6 @@
 
 struct tda829x_config {
 	unsigned int lna_cfg;
-	int (*tuner_callback) (void *dev, int command, int arg);
 
 	unsigned int probe_tuner:1;
 #define TDA829X_PROBE_TUNER 0

drivers/media/common/tuners/tda9887.c

@@ -686,7 +686,6 @@ struct dvb_frontend *tda9887_attach(struct dvb_frontend *fe,
 	case 0:
 		mutex_unlock(&tda9887_list_mutex);
 		return NULL;
-		break;
 	case 1:
 		fe->analog_demod_priv = priv;
 		priv->mode = T_STANDBY;

drivers/media/common/tuners/tuner-simple.c

@@ -142,6 +142,7 @@ static inline int tuner_stereo(const int type, const int status)
 	case TUNER_PHILIPS_FM1236_MK3:
 	case TUNER_PHILIPS_FM1256_IH3:
 	case TUNER_LG_NTSC_TAPE:
+	case TUNER_TCL_MF02GIP_5N:
 		return ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3);
 	default:
 		return status & TUNER_STEREO;
@@ -494,6 +495,7 @@ static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer)
 	case TUNER_PHILIPS_FMD1216ME_MK3:
 	case TUNER_LG_NTSC_TAPE:
 	case TUNER_PHILIPS_FM1256_IH3:
+	case TUNER_TCL_MF02GIP_5N:
 		buffer[3] = 0x19;
 		break;
 	case TUNER_TNF_5335MF:
@@ -1038,7 +1040,6 @@ struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe,
 	case 0:
 		mutex_unlock(&tuner_simple_list_mutex);
 		return NULL;
-		break;
 	case 1:
 		fe->tuner_priv = priv;
 

drivers/media/common/tuners/tuner-types.c

@@ -1216,6 +1216,23 @@ static struct tuner_params tuner_samsung_tcpg_6121p30a_params[] = {
 	},
 };
 
+/* ------------ TUNER_TCL_MF02GIP-5N-E - TCL MF02GIP-5N ------------ */
+
+static struct tuner_range tuner_tcl_mf02gip_5n_ntsc_ranges[] = {
+	{ 16 * 172.00 /*MHz*/, 0x8e, 0x01, },
+	{ 16 * 448.00 /*MHz*/, 0x8e, 0x02, },
+	{ 16 * 999.99        , 0x8e, 0x04, },
+};
+
+static struct tuner_params tuner_tcl_mf02gip_5n_params[] = {
+	{
+		.type   = TUNER_PARAM_TYPE_NTSC,
+		.ranges = tuner_tcl_mf02gip_5n_ntsc_ranges,
+		.count  = ARRAY_SIZE(tuner_tcl_mf02gip_5n_ntsc_ranges),
+		.cb_first_if_lower_freq = 1,
+	},
+};
+
 /* --------------------------------------------------------------------- */
 
 struct tunertype tuners[] = {
@@ -1641,6 +1658,11 @@ struct tunertype tuners[] = {
 		.name   = "Xceive 5000 tuner",
 		/* see xc5000.c for details */
 	},
+	[TUNER_TCL_MF02GIP_5N] = { /* TCL tuner MF02GIP-5N-E */
+		.name   = "TCL tuner MF02GIP-5N-E",
+		.params = tuner_tcl_mf02gip_5n_params,
+		.count  = ARRAY_SIZE(tuner_tcl_mf02gip_5n_params),
+	},
 };
 EXPORT_SYMBOL(tuners);
 

drivers/media/common/tuners/tuner-xc2028.c

@@ -71,9 +71,6 @@ struct firmware_properties {
 struct xc2028_data {
 	struct list_head        hybrid_tuner_instance_list;
 	struct tuner_i2c_props  i2c_props;
-	int                     (*tuner_callback) (void *dev,
-						   int command, int arg);
-	void			*video_dev;
 	__u32			frequency;
 
 	struct firmware_description *firm;
@@ -492,6 +489,23 @@ static int seek_firmware(struct dvb_frontend *fe, unsigned int type,
 	return i;
 }
 
+static inline int do_tuner_callback(struct dvb_frontend *fe, int cmd, int arg)
+{
+	struct xc2028_data *priv = fe->tuner_priv;
+
+	/* analog side (tuner-core) uses i2c_adap->algo_data.
+	 * digital side is not guaranteed to have algo_data defined.
+	 *
+	 * digital side will always have fe->dvb defined.
+	 * analog side (tuner-core) doesn't (yet) define fe->dvb.
+	 */
+
+	return (!fe->callback) ? -EINVAL :
+		fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
+				fe->dvb->priv : priv->i2c_props.adap->algo_data,
+			     DVB_FRONTEND_COMPONENT_TUNER, cmd, arg);
+}
+
 static int load_firmware(struct dvb_frontend *fe, unsigned int type,
 			 v4l2_std_id *id)
 {
@@ -530,8 +544,7 @@ static int load_firmware(struct dvb_frontend *fe, unsigned int type,
 
 		if (!size) {
 			/* Special callback command received */
-			rc = priv->tuner_callback(priv->video_dev,
-						  XC2028_TUNER_RESET, 0);
+			rc = do_tuner_callback(fe, XC2028_TUNER_RESET, 0);
 			if (rc < 0) {
 				tuner_err("Error at RESET code %d\n",
 					   (*p) & 0x7f);
@@ -542,8 +555,7 @@ static int load_firmware(struct dvb_frontend *fe, unsigned int type,
 		if (size >= 0xff00) {
 			switch (size) {
 			case 0xff00:
-				rc = priv->tuner_callback(priv->video_dev,
-							XC2028_RESET_CLK, 0);
+				rc = do_tuner_callback(fe, XC2028_RESET_CLK, 0);
 				if (rc < 0) {
 					tuner_err("Error at RESET code %d\n",
 						  (*p) & 0x7f);
@@ -715,8 +727,7 @@ static int check_firmware(struct dvb_frontend *fe, unsigned int type,
 	memset(&priv->cur_fw, 0, sizeof(priv->cur_fw));
 
 	/* Reset is needed before loading firmware */
-	rc = priv->tuner_callback(priv->video_dev,
-				  XC2028_TUNER_RESET, 0);
+	rc = do_tuner_callback(fe, XC2028_TUNER_RESET, 0);
 	if (rc < 0)
 		goto fail;
 
@@ -933,7 +944,7 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */,
 	   The reset CLK is needed only with tm6000.
 	   Driver should work fine even if this fails.
 	 */
-	priv->tuner_callback(priv->video_dev, XC2028_RESET_CLK, 1);
+	do_tuner_callback(fe, XC2028_RESET_CLK, 1);
 
 	msleep(10);
 
@@ -1002,11 +1013,6 @@ static int xc2028_set_params(struct dvb_frontend *fe,
 
 	tuner_dbg("%s called\n", __func__);
 
-	if (priv->ctrl.d2633)
-		type |= D2633;
-	else
-		type |= D2620;
-
 	switch(fe->ops.info.type) {
 	case FE_OFDM:
 		bw = p->u.ofdm.bandwidth;
@@ -1021,10 +1027,8 @@ static int xc2028_set_params(struct dvb_frontend *fe,
 		break;
 	case FE_ATSC:
 		bw = BANDWIDTH_6_MHZ;
-		/* The only ATSC firmware (at least on v2.7) is D2633,
-		   so overrides ctrl->d2633 */
-		type |= ATSC| D2633;
-		type &= ~D2620;
+		/* The only ATSC firmware (at least on v2.7) is D2633 */
+		type |= ATSC | D2633;
 		break;
 	/* DVB-S is not supported */
 	default:
@@ -1057,6 +1061,28 @@ static int xc2028_set_params(struct dvb_frontend *fe,
 		tuner_err("error: bandwidth not supported.\n");
 	};
 
+	/*
+	  Selects between D2633 or D2620 firmware.
+	  It doesn't make sense for ATSC, since it should be D2633 on all cases
+	 */
+	if (fe->ops.info.type != FE_ATSC) {
+		switch (priv->ctrl.type) {
+		case XC2028_D2633:
+			type |= D2633;
+			break;
+		case XC2028_D2620:
+			type |= D2620;
+			break;
+		case XC2028_AUTO:
+		default:
+			/* Zarlink seems to need D2633 */
+			if (priv->ctrl.demod == XC3028_FE_ZARLINK456)
+				type |= D2633;
+			else
+				type |= D2620;
+		}
+	}
+
 	/* All S-code tables need a 200kHz shift */
 	if (priv->ctrl.demod)
 		demod = priv->ctrl.demod + 200;
@@ -1177,20 +1203,10 @@ struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe,
 		break;
 	case 1:
 		/* new tuner instance */
-		priv->tuner_callback = cfg->callback;
 		priv->ctrl.max_len = 13;
 
 		mutex_init(&priv->lock);
 
-		/* analog side (tuner-core) uses i2c_adap->algo_data.
-		 * digital side is not guaranteed to have algo_data defined.
-		 *
-		 * digital side will always have fe->dvb defined.
-		 * analog side (tuner-core) doesn't (yet) define fe->dvb.
-		 */
-		priv->video_dev = ((fe->dvb) && (fe->dvb->priv)) ?
-				   fe->dvb->priv : cfg->i2c_adap->algo_data;
-
 		fe->tuner_priv = priv;
 		break;
 	case 2:

drivers/media/common/tuners/tuner-xc2028.h

@@ -24,24 +24,28 @@
 #define	XC3028_FE_ZARLINK456	4560
 #define	XC3028_FE_CHINA		5200
 
+enum firmware_type {
+	XC2028_AUTO = 0,        /* By default, auto-detects */
+	XC2028_D2633,
+	XC2028_D2620,
+};
+
 struct xc2028_ctrl {
 	char			*fname;
 	int			max_len;
 	unsigned int		scode_table;
 	unsigned int		mts   :1;
-	unsigned int		d2633 :1;
 	unsigned int		input1:1;
 	unsigned int		vhfbw7:1;
 	unsigned int		uhfbw8:1;
 	unsigned int		demod;
+	enum firmware_type	type:2;
 };
 
 struct xc2028_config {
 	struct i2c_adapter *i2c_adap;
 	u8 		   i2c_addr;
-	void               *video_dev;
 	struct xc2028_ctrl *ctrl;
-	int                (*callback) (void *dev, int command, int arg);
 };
 
 /* xc2028 commands for callback */

drivers/media/common/tuners/xc5000.c

@@ -30,7 +30,7 @@
 #include "dvb_frontend.h"
 
 #include "xc5000.h"
-#include "xc5000_priv.h"
+#include "tuner-i2c.h"
 
 static int debug;
 module_param(debug, int, 0644);
@@ -40,12 +40,26 @@ static int xc5000_load_fw_on_attach;
 module_param_named(init_fw, xc5000_load_fw_on_attach, int, 0644);
 MODULE_PARM_DESC(init_fw, "Load firmware during driver initialization.");
 
+static DEFINE_MUTEX(xc5000_list_mutex);
+static LIST_HEAD(hybrid_tuner_instance_list);
+
 #define dprintk(level,fmt, arg...) if (debug >= level) \
 	printk(KERN_INFO "%s: " fmt, "xc5000", ## arg)
 
 #define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.1.fw"
 #define XC5000_DEFAULT_FIRMWARE_SIZE 12332
 
+struct xc5000_priv {
+	struct tuner_i2c_props i2c_props;
+	struct list_head hybrid_tuner_instance_list;
+
+	u32 if_khz;
+	u32 freq_hz;
+	u32 bandwidth;
+	u8  video_standard;
+	u8  rf_mode;
+};
+
 /* Misc Defines */
 #define MAX_TV_STANDARD			23
 #define XC_MAX_I2C_WRITE_LENGTH		64
@@ -216,8 +230,11 @@ static void xc5000_TunerReset(struct dvb_frontend *fe)
 
 	dprintk(1, "%s()\n", __func__);
 
-	if (priv->cfg->tuner_callback) {
-		ret = priv->cfg->tuner_callback(priv->devptr,
+	if (fe->callback) {
+		ret = fe->callback(((fe->dvb) && (fe->dvb->priv)) ?
+					   fe->dvb->priv :
+					   priv->i2c_props.adap->algo_data,
+					   DVB_FRONTEND_COMPONENT_TUNER,
 					   XC5000_TUNER_RESET, 0);
 		if (ret)
 			printk(KERN_ERR "xc5000: reset failed\n");
@@ -509,13 +526,13 @@ static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val)
 	u8 buf[2] = { reg >> 8, reg & 0xff };
 	u8 bval[2] = { 0, 0 };
 	struct i2c_msg msg[2] = {
-		{ .addr = priv->cfg->i2c_address,
+		{ .addr = priv->i2c_props.addr,
 			.flags = 0, .buf = &buf[0], .len = 2 },
-		{ .addr = priv->cfg->i2c_address,
+		{ .addr = priv->i2c_props.addr,
 			.flags = I2C_M_RD, .buf = &bval[0], .len = 2 },
 	};
 
-	if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+	if (i2c_transfer(priv->i2c_props.adap, msg, 2) != 2) {
 		printk(KERN_WARNING "xc5000: I2C read failed\n");
 		return -EREMOTEIO;
 	}
@@ -526,10 +543,10 @@ static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val)
 
 static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len)
 {
-	struct i2c_msg msg = { .addr = priv->cfg->i2c_address,
+	struct i2c_msg msg = { .addr = priv->i2c_props.addr,
 		.flags = 0, .buf = buf, .len = len };
 
-	if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+	if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
 		printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n",
 			(int)len);
 		return -EREMOTEIO;
@@ -539,10 +556,10 @@ static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len)
 
 static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len)
 {
-	struct i2c_msg msg = { .addr = priv->cfg->i2c_address,
+	struct i2c_msg msg = { .addr = priv->i2c_props.addr,
 		.flags = I2C_M_RD, .buf = buf, .len = len };
 
-	if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+	if (i2c_transfer(priv->i2c_props.adap, &msg, 1) != 1) {
 		printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n",(int)len);
 		return -EREMOTEIO;
 	}
@@ -559,7 +576,7 @@ static int xc5000_fwupload(struct dvb_frontend* fe)
 	printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n",
 		XC5000_DEFAULT_FIRMWARE);
 
-	ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, &priv->i2c->dev);
+	ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, &priv->i2c_props.adap->dev);
 	if (ret) {
 		printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n");
 		ret = XC_RESULT_RESET_FAILURE;
@@ -675,10 +692,10 @@ static int xc5000_set_params(struct dvb_frontend *fe,
 		return -EREMOTEIO;
 	}
 
-	ret = xc_set_IF_frequency(priv, priv->cfg->if_khz);
+	ret = xc_set_IF_frequency(priv, priv->if_khz);
 	if (ret != XC_RESULT_SUCCESS) {
 		printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n",
-			priv->cfg->if_khz);
+		       priv->if_khz);
 		return -EIO;
 	}
 
@@ -897,9 +914,19 @@ static int xc5000_init(struct dvb_frontend *fe)
 
 static int xc5000_release(struct dvb_frontend *fe)
 {
+	struct xc5000_priv *priv = fe->tuner_priv;
+
 	dprintk(1, "%s()\n", __func__);
-	kfree(fe->tuner_priv);
+
+	mutex_lock(&xc5000_list_mutex);
+
+	if (priv)
+		hybrid_tuner_release_state(priv);
+
+	mutex_unlock(&xc5000_list_mutex);
+
 	fe->tuner_priv = NULL;
+
 	return 0;
 }
 
@@ -924,29 +951,43 @@ static const struct dvb_tuner_ops xc5000_tuner_ops = {
 
 struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
 				   struct i2c_adapter *i2c,
-				   struct xc5000_config *cfg, void *devptr)
+				   struct xc5000_config *cfg)
 {
 	struct xc5000_priv *priv = NULL;
+	int instance;
 	u16 id = 0;
 
-	dprintk(1, "%s()\n", __func__);
+	dprintk(1, "%s(%d-%04x)\n", __func__,
+		i2c ? i2c_adapter_id(i2c) : -1,
+		cfg ? cfg->i2c_address : -1);
 
-	priv = kzalloc(sizeof(struct xc5000_priv), GFP_KERNEL);
-	if (priv == NULL)
-		return NULL;
+	mutex_lock(&xc5000_list_mutex);
 
-	priv->cfg = cfg;
+	instance = hybrid_tuner_request_state(struct xc5000_priv, priv,
+					      hybrid_tuner_instance_list,
+					      i2c, cfg->i2c_address, "xc5000");
+	switch (instance) {
+	case 0:
+		goto fail;
+		break;
+	case 1:
+		/* new tuner instance */
 		priv->bandwidth = BANDWIDTH_6_MHZ;
-	priv->i2c = i2c;
-	priv->devptr = devptr;
+		priv->if_khz = cfg->if_khz;
+
+		fe->tuner_priv = priv;
+		break;
+	default:
+		/* existing tuner instance */
+		fe->tuner_priv = priv;
+		break;
+	}
 
 	/* Check if firmware has been loaded. It is possible that another
 	   instance of the driver has loaded the firmware.
 	 */
-	if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0) {
-		kfree(priv);
-		return NULL;
-	}
+	if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0)
+		goto fail;
 
 	switch(id) {
 	case XC_PRODUCT_ID_FW_LOADED:
@@ -967,19 +1008,23 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
 		printk(KERN_ERR
 			"xc5000: Device not found at addr 0x%02x (0x%x)\n",
 			cfg->i2c_address, id);
-		kfree(priv);
-		return NULL;
+		goto fail;
 	}
 
+	mutex_unlock(&xc5000_list_mutex);
+
 	memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops,
 		sizeof(struct dvb_tuner_ops));
 
-	fe->tuner_priv = priv;
-
 	if (xc5000_load_fw_on_attach)
 		xc5000_init(fe);
 
 	return fe;
+fail:
+	mutex_unlock(&xc5000_list_mutex);
+
+	xc5000_release(fe);
+	return NULL;
 }
 EXPORT_SYMBOL(xc5000_attach);
 

drivers/media/common/tuners/xc5000.h

@@ -30,8 +30,6 @@ struct i2c_adapter;
 struct xc5000_config {
 	u8   i2c_address;
 	u32  if_khz;
-
-	int  (*tuner_callback) (void *priv, int command, int arg);
 };
 
 /* xc5000 callback command */
@@ -49,13 +47,11 @@ struct xc5000_config {
     (defined(CONFIG_MEDIA_TUNER_XC5000_MODULE) && defined(MODULE))
 extern struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe,
 					  struct i2c_adapter *i2c,
-					  struct xc5000_config *cfg,
-					  void *devptr);
+					  struct xc5000_config *cfg);
 #else
 static inline struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe,
 						 struct i2c_adapter *i2c,
-						 struct xc5000_config *cfg,
-						 void *devptr)
+						 struct xc5000_config *cfg)
 {
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;

drivers/media/common/tuners/xc5000_priv.h

-/*
- *  Driver for Xceive XC5000 "QAM/8VSB single chip tuner"
- *
- *  Copyright (c) 2007 Steven Toth <stoth@linuxtv.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef XC5000_PRIV_H
-#define XC5000_PRIV_H
-
-struct xc5000_priv {
-	struct xc5000_config *cfg;
-	struct i2c_adapter   *i2c;
-
-	u32 freq_hz;
-	u32 bandwidth;
-	u8  video_standard;
-	u8  rf_mode;
-
-	void *devptr;
-};
-
-#endif

drivers/media/dvb/Kconfig

@@ -20,7 +20,6 @@ comment "Supported USB Adapters"
 source "drivers/media/dvb/dvb-usb/Kconfig"
 source "drivers/media/dvb/ttusb-budget/Kconfig"
 source "drivers/media/dvb/ttusb-dec/Kconfig"
-source "drivers/media/dvb/cinergyT2/Kconfig"
 source "drivers/media/dvb/siano/Kconfig"
 
 comment "Supported FlexCopII (B2C2) Adapters"
@@ -35,6 +34,10 @@ comment "Supported Pluto2 Adapters"
 	depends on DVB_CORE && PCI && I2C
 source "drivers/media/dvb/pluto2/Kconfig"
 
+comment "Supported SDMC DM1105 Adapters"
+	depends on DVB_CORE && PCI && I2C
+source "drivers/media/dvb/dm1105/Kconfig"
+
 comment "Supported DVB Frontends"
 	depends on DVB_CORE
 source "drivers/media/dvb/frontends/Kconfig"

drivers/media/dvb/Makefile

@@ -2,4 +2,4 @@
 # Makefile for the kernel multimedia device drivers.
 #
 
-obj-y        := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ cinergyT2/ dvb-usb/ pluto2/ siano/
+obj-y        := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ dvb-usb/ pluto2/ siano/ dm1105/

drivers/media/dvb/b2c2/flexcop-dma.c

@@ -10,7 +10,7 @@
 int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size)
 {
 	u8 *tcpu;
-	dma_addr_t tdma;
+	dma_addr_t tdma = 0;
 
 	if (size % 2) {
 		err("dma buffersize has to be even.");

drivers/media/dvb/bt8xx/dvb-bt8xx.c

@@ -702,7 +702,7 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
 	}
 
 	if (card->fe == NULL)
-		printk("dvb-bt8xx: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n",
+		printk("dvb-bt8xx: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
 		       card->bt->dev->vendor,
 		       card->bt->dev->device,
 		       card->bt->dev->subsystem_vendor,

drivers/media/dvb/cinergyT2/Kconfig

-config DVB_CINERGYT2
-	tristate "Terratec CinergyT2/qanu USB2 DVB-T receiver"
-	depends on DVB_CORE && USB && INPUT
-	help
-	  Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers
-
-	  Say Y if you own such a device and want to use it.
-
-
-config DVB_CINERGYT2_TUNING
-	bool "sophisticated fine-tuning for CinergyT2 cards"
-	depends on DVB_CINERGYT2
-	help
-	  Here you can fine-tune some parameters of the CinergyT2 driver.
-
-	  Normally you don't need to touch this, but in exotic setups you
-	  may fine-tune your setup and adjust e.g. DMA buffer sizes for
-	  a particular application.
-
-
-config DVB_CINERGYT2_STREAM_URB_COUNT
-	int "Number of queued USB Request Blocks for Highspeed Stream Transfers"
-	depends on DVB_CINERGYT2_TUNING
-	default "32"
-	help
-	  USB Request Blocks for Highspeed Stream transfers are scheduled in
-	  a queue for the Host Controller.
-
-	  Usually the default value is a safe choice.
-
-	  You may increase this number if you are using this device in a
-	  Server Environment with many high-traffic USB Highspeed devices
-	  sharing the same USB bus.
-
-
-config DVB_CINERGYT2_STREAM_BUF_SIZE
-	int "Size of URB Stream Buffers for Highspeed Transfers"
-	depends on DVB_CINERGYT2_TUNING
-	default "512"
-	help
-	  Should be a multiple of native buffer size of 512 bytes.
-	  Default value is a safe choice.
-
-	  You may increase this number if you are using this device in a
-	  Server Environment with many high-traffic USB Highspeed devices
-	  sharing the same USB bus.
-
-
-config DVB_CINERGYT2_QUERY_INTERVAL
-	int "Status update interval [milliseconds]"
-	depends on DVB_CINERGYT2_TUNING
-	default "250"
-	help
-	  This is the interval for status readouts from the demodulator.
-	  You may try lower values if you need more responsive signal quality
-	  measurements.
-
-	  Please keep in mind that these updates cause traffic on the tuner
-	  control bus and thus may or may not affect reception sensitivity.
-
-	  The default value should be a safe choice for common applications.
-
-
-config DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
-	bool "Register the onboard IR Remote Control Receiver as Input Device"
-	depends on DVB_CINERGYT2_TUNING
-	default y
-	help
-	  Enable this option if you want to use the onboard Infrared Remote
-	  Control Receiver as Linux-Input device.
-
-	  Right now only the keycode table for the default Remote Control
-	  delivered with the device is supported, please see the driver
-	  source code to find out how to add support for other controls.
-
-
-config DVB_CINERGYT2_RC_QUERY_INTERVAL
-	int "Infrared Remote Controller update interval [milliseconds]"
-	depends on DVB_CINERGYT2_TUNING && DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
-	default "50"
-	help
-	  If you have a very fast-repeating remote control you can try lower
-	  values, for normal consumer receivers the default value should be
-	  a safe choice.
-

drivers/media/dvb/cinergyT2/Makefile

-obj-$(CONFIG_DVB_CINERGYT2) += cinergyT2.o
-
-EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/

drivers/media/dvb/dm1105/Kconfig

+config DVB_DM1105
+	tristate "SDMC DM1105 based PCI cards"
+	depends on DVB_CORE && PCI && I2C
+	select DVB_PLL if !DVB_FE_CUSTOMISE
+	select DVB_STV0299 if !DVB_FE_CUSTOMISE
+	select DVB_STV0288 if !DVB_FE_CUSTOMISE
+	select DVB_STB6000 if !DVB_FE_CUSTOMISE
+	select DVB_CX24116 if !DVB_FE_CUSTOMISE
+	select DVB_SI21XX if !DVB_FE_CUSTOMISE
+	help
+	  Support for cards based on the SDMC DM1105 PCI chip like
+	  DvbWorld 2002
+
+	  Since these cards have no MPEG decoder onboard, they transmit
+	  only compressed MPEG data over the PCI bus, so you need
+	  an external software decoder to watch TV on your computer.
+
+	  Say Y or M if you own such a device and want to use it.

drivers/media/dvb/dm1105/Makefile

+obj-$(CONFIG_DVB_DM1105) += dm1105.o
+
+EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends

drivers/media/dvb/dvb-core/dvb_frontend.h

@@ -169,6 +169,9 @@ struct dvb_frontend_ops {
 
 	struct dvb_tuner_ops tuner_ops;
 	struct analog_demod_ops analog_ops;
+
+	int (*set_property)(struct dvb_frontend* fe, struct dtv_property* tvp);
+	int (*get_property)(struct dvb_frontend* fe, struct dtv_property* tvp);
 };
 
 #define MAX_EVENT 8
@@ -182,6 +185,32 @@ struct dvb_fe_events {
 	struct mutex		  mtx;
 };
 
+struct dtv_frontend_properties {
+
+	/* Cache State */
+	u32			state;
+
+	u32			frequency;
+	fe_modulation_t		modulation;
+
+	fe_sec_voltage_t	voltage;
+	fe_sec_tone_mode_t	sectone;
+	fe_spectral_inversion_t	inversion;
+	fe_code_rate_t		fec_inner;
+	fe_transmit_mode_t	transmission_mode;
+	u32			bandwidth_hz;	/* 0 = AUTO */
+	fe_guard_interval_t	guard_interval;
+	fe_hierarchy_t		hierarchy;
+	u32			symbol_rate;
+	fe_code_rate_t		code_rate_HP;
+	fe_code_rate_t		code_rate_LP;
+
+	fe_pilot_t		pilot;
+	fe_rolloff_t		rolloff;
+
+	fe_delivery_system_t	delivery_system;
+};
+
 struct dvb_frontend {
 	struct dvb_frontend_ops ops;
 	struct dvb_adapter *dvb;
@@ -190,6 +219,9 @@ struct dvb_frontend {
 	void *frontend_priv;
 	void *sec_priv;
 	void *analog_demod_priv;
+	struct dtv_frontend_properties dtv_property_cache;
+#define DVB_FRONTEND_COMPONENT_TUNER 0
+	int (*callback)(void *adapter_priv, int component, int cmd, int arg);
 };
 
 extern int dvb_register_frontend(struct dvb_adapter *dvb,

drivers/media/dvb/dvb-usb/Kconfig

@@ -72,9 +72,11 @@ config DVB_USB_DIB0700
 	select DVB_DIB7000P
 	select DVB_DIB7000M
 	select DVB_DIB3000MC
+	select DVB_S5H1411 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_MT2060 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_MT2266 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
 	select DVB_TUNER_DIB0070
 	help
 	  Support for USB2.0/1.1 DVB receivers based on the DiB0700 USB bridge. The
@@ -108,6 +110,8 @@ config DVB_USB_CXUSB
 	select MEDIA_TUNER_SIMPLE if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMISE
 	select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+	select DVB_DIB7000P if !DVB_FE_CUSTOMISE
+	select DVB_TUNER_DIB0070 if !DVB_FE_CUSTOMISE
 	help
 	  Say Y here to support the Conexant USB2.0 hybrid reference design.
 	  Currently, only DVB and ATSC modes are supported, analog mode
@@ -245,12 +249,25 @@ config DVB_USB_AF9005_REMOTE
 	  Afatech AF9005 based receiver.
 
 config DVB_USB_DW2102
-	tristate "DvbWorld 2102 DVB-S USB2.0 receiver"
+	tristate "DvbWorld DVB-S/S2 USB2.0 support"
 	depends on DVB_USB
-	select DVB_STV0299 if !DVB_FE_CUSTOMISE
 	select DVB_PLL if !DVB_FE_CUSTOMISE
+	select DVB_STV0299 if !DVB_FE_CUSTOMISE
+	select DVB_STV0288 if !DVB_FE_CUSTOMISE
+	select DVB_STB6000 if !DVB_FE_CUSTOMISE
+	select DVB_CX24116 if !DVB_FE_CUSTOMISE
+	select DVB_SI21XX if !DVB_FE_CUSTOMISE
+	help
+	  Say Y here to support the DvbWorld DVB-S/S2 USB2.0 receivers
+	  and the TeVii S650.
+
+config 	DVB_USB_CINERGY_T2
+	tristate "Terratec CinergyT2/qanu USB 2.0 DVB-T receiver"
+	depends on DVB_USB
 	help
-	   Say Y here to support the DvbWorld 2102 DVB-S USB2.0 receiver.
+	  Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers
+
+	  Say Y if you own such a device and want to use it.
 
 config DVB_USB_ANYSEE
 	tristate "Anysee DVB-T/C USB2.0 support"
@@ -262,3 +279,22 @@ config DVB_USB_ANYSEE
 	help
 	  Say Y here to support the Anysee E30, Anysee E30 Plus or
 	  Anysee E30 C Plus DVB USB2.0 receiver.
+
+config DVB_USB_DTV5100
+	tristate "AME DTV-5100 USB2.0 DVB-T support"
+	depends on DVB_USB
+	select MEDIA_TUNER_QT1010 if !DVB_FE_CUSTOMISE
+	help
+	  Say Y here to support the AME DTV-5100 USB2.0 DVB-T receiver.
+
+config DVB_USB_AF9015
+	tristate "Afatech AF9015 DVB-T USB2.0 support"
+	depends on DVB_USB && EXPERIMENTAL
+	select DVB_AF9013
+	select DVB_PLL              if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MT2060   if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_QT1010   if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMISE
+	select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE
+	help
+	  Say Y here to support the Afatech AF9015 based DVB-T USB2.0 receiver

drivers/media/dvb/dvb-usb/Makefile

@@ -67,6 +67,16 @@ obj-$(CONFIG_DVB_USB_ANYSEE) += dvb-usb-anysee.o
 dvb-usb-dw2102-objs = dw2102.o
 obj-$(CONFIG_DVB_USB_DW2102) += dvb-usb-dw2102.o
 
+dvb-usb-dtv5100-objs = dtv5100.o
+obj-$(CONFIG_DVB_USB_DTV5100) += dvb-usb-dtv5100.o
+
+dvb-usb-af9015-objs = af9015.o
+obj-$(CONFIG_DVB_USB_AF9015) += dvb-usb-af9015.o
+
+dvb-usb-cinergyT2-objs = cinergyT2-core.o cinergyT2-fe.o
+obj-$(CONFIG_DVB_USB_CINERGY_T2) += dvb-usb-cinergyT2.o
+
+
 EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/
 # due to tuner-xc3028
 EXTRA_CFLAGS += -Idrivers/media/common/tuners

drivers/media/dvb/dvb-usb/af9005-remote.c

@@ -25,7 +25,7 @@
  */
 #include "af9005.h"
 /* debug */
-int dvb_usb_af9005_remote_debug;
+static int dvb_usb_af9005_remote_debug;
 module_param_named(debug, dvb_usb_af9005_remote_debug, int, 0644);
 MODULE_PARM_DESC(debug,
 		 "enable (1) or disable (0) debug messages."

drivers/media/dvb/dvb-usb/af9005-script.h

@@ -14,7 +14,7 @@ typedef struct {
 	u8 val;
 } RegDesc;
 
-RegDesc script[] = {
+static RegDesc script[] = {
 	{0xa180, 0x0, 0x8, 0xa},
 	{0xa181, 0x0, 0x8, 0xd7},
 	{0xa182, 0x0, 0x8, 0xa3},

drivers/media/dvb/dvb-usb/af9005.c

@@ -35,17 +35,17 @@ module_param_named(led, dvb_usb_af9005_led, bool, 0644);
 MODULE_PARM_DESC(led, "enable led (default: 1).");
 
 /* eeprom dump */
-int dvb_usb_af9005_dump_eeprom = 0;
+static int dvb_usb_af9005_dump_eeprom;
 module_param_named(dump_eeprom, dvb_usb_af9005_dump_eeprom, int, 0);
 MODULE_PARM_DESC(dump_eeprom, "dump contents of the eeprom.");
 
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 /* remote control decoder */
-int (*rc_decode) (struct dvb_usb_device * d, u8 * data, int len, u32 * event,
-		  int *state);
-void *rc_keys;
-int *rc_keys_size;
+static int (*rc_decode) (struct dvb_usb_device *d, u8 *data, int len,
+		u32 *event, int *state);
+static void *rc_keys;
+static int *rc_keys_size;
 
 u8 regmask[8] = { 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff };
 
@@ -54,8 +54,8 @@ struct af9005_device_state {
 	int led_state;
 };
 
-int af9005_usb_generic_rw(struct dvb_usb_device *d, u8 * wbuf, u16 wlen,
-			  u8 * rbuf, u16 rlen, int delay_ms)
+static int af9005_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen,
+			  u8 *rbuf, u16 rlen, int delay_ms)
 {
 	int actlen, ret = -ENOMEM;
 
@@ -98,12 +98,7 @@ int af9005_usb_generic_rw(struct dvb_usb_device *d, u8 * wbuf, u16 wlen,
 	return ret;
 }
 
-int af9005_usb_generic_write(struct dvb_usb_device *d, u8 * buf, u16 len)
-{
-	return af9005_usb_generic_rw(d, buf, len, NULL, 0, 0);
-}
-
-int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
+static int af9005_generic_read_write(struct dvb_usb_device *d, u16 reg,
 			      int readwrite, int type, u8 * values, int len)
 {
 	struct af9005_device_state *st = d->priv;
@@ -765,7 +760,7 @@ static int af9005_boot_packet(struct usb_device *udev, int type, u8 * reply)
 	return 0;
 }
 
-int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw)
+static int af9005_download_firmware(struct usb_device *udev, const struct firmware *fw)
 {
 	int i, packets, ret, act_len;
 

drivers/media/dvb/dvb-usb/anysee.c

@@ -41,6 +41,9 @@
 static int dvb_usb_anysee_debug;
 module_param_named(debug, dvb_usb_anysee_debug, int, 0644);
 MODULE_PARM_DESC(debug, "set debugging level" DVB_USB_DEBUG_STATUS);
+int dvb_usb_anysee_delsys;
+module_param_named(delsys, dvb_usb_anysee_delsys, int, 0644);
+MODULE_PARM_DESC(delsys, "select delivery mode (0=DVB-C, 1=DVB-T)");
 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
 
 static struct mutex anysee_usb_mutex;
@@ -178,14 +181,14 @@ static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,
 			inc = 1;
 		}
 		if (ret)
-			return ret;
+			break;
 
 		i += inc;
 	}
 
 	mutex_unlock(&d->i2c_mutex);
 
-	return i;
+	return ret ? ret : i;
 }
 
 static u32 anysee_i2c_func(struct i2c_adapter *adapter)
@@ -272,9 +275,11 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 	      model      demod     hw  firmware
 	   1. E30        MT352     02  0.2.1
 	   2. E30        ZL10353   02  0.2.1
-	   3. E30 Plus   ZL10353   06  0.1.0
-	   4. E30C Plus  TDA10023  0a  0.1.0    rev 0.2
-	   4. E30C Plus  TDA10023  0f  0.1.2    rev 0.4
+	   3. E30 Combo  ZL10353   0f  0.1.2    DVB-T/C combo
+	   4. E30 Plus   ZL10353   06  0.1.0
+	   5. E30C Plus  TDA10023  0a  0.1.0    rev 0.2
+	      E30C Plus  TDA10023  0f  0.1.2    rev 0.4
+	      E30 Combo  TDA10023  0f  0.1.2    DVB-T/C combo
 	*/
 
 	/* Zarlink MT352 DVB-T demod inside of Samsung DNOS404ZH102A NIM */
@@ -293,6 +298,21 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 		return 0;
 	}
 
+	/* for E30 Combo Plus DVB-T demodulator */
+	if (dvb_usb_anysee_delsys) {
+		ret = anysee_write_reg(adap->dev, 0xb0, 0x01);
+		if (ret)
+			return ret;
+
+		/* Zarlink ZL10353 DVB-T demod */
+		adap->fe = dvb_attach(zl10353_attach, &anysee_zl10353_config,
+				      &adap->dev->i2c_adap);
+		if (adap->fe != NULL) {
+			state->tuner = DVB_PLL_SAMSUNG_DTOS403IH102A;
+			return 0;
+		}
+	}
+
 	/* connect demod on IO port D for TDA10023 & ZL10353 */
 	ret = anysee_write_reg(adap->dev, 0xb0, 0x25);
 	if (ret)

drivers/media/dvb/dvb-usb/cinergyT2.h

+/*
+ * TerraTec Cinergy T2/qanu USB2 DVB-T adapter.
+ *
+ * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi)
+ *
+ * Based on the dvb-usb-framework code and the
+ * original Terratec Cinergy T2 driver by:
+ *
+ * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and
+ *                  Holger Waechtler <holger@qanu.de>
+ *
+ *  Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License,  or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not,  write to the Free Software
+ * Foundation,  Inc.,  675 Mass Ave,  Cambridge,  MA 02139,  USA.
+ *
+ */
+
+#ifndef _DVB_USB_CINERGYT2_H_
+#define _DVB_USB_CINERGYT2_H_
+
+#include <linux/usb/input.h>
+
+#define DVB_USB_LOG_PREFIX "cinergyT2"
+#include "dvb-usb.h"
+
+#define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver"
+
+extern int dvb_usb_cinergyt2_debug;
+
+#define deb_info(args...)  dprintk(dvb_usb_cinergyt2_debug,  0x001, args)
+#define deb_xfer(args...)  dprintk(dvb_usb_cinergyt2_debug,  0x002, args)
+#define deb_pll(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x004, args)
+#define deb_ts(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x008, args)
+#define deb_err(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x010, args)
+#define deb_rc(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x020, args)
+#define deb_fw(args...)    dprintk(dvb_usb_cinergyt2_debug,  0x040, args)
+#define deb_mem(args...)   dprintk(dvb_usb_cinergyt2_debug,  0x080, args)
+#define deb_uxfer(args...) dprintk(dvb_usb_cinergyt2_debug,  0x100, args)
+
+
+
+enum cinergyt2_ep1_cmd {
+	CINERGYT2_EP1_PID_TABLE_RESET		= 0x01,
+	CINERGYT2_EP1_PID_SETUP			= 0x02,
+	CINERGYT2_EP1_CONTROL_STREAM_TRANSFER	= 0x03,
+	CINERGYT2_EP1_SET_TUNER_PARAMETERS	= 0x04,
+	CINERGYT2_EP1_GET_TUNER_STATUS		= 0x05,
+	CINERGYT2_EP1_START_SCAN		= 0x06,
+	CINERGYT2_EP1_CONTINUE_SCAN		= 0x07,
+	CINERGYT2_EP1_GET_RC_EVENTS		= 0x08,
+	CINERGYT2_EP1_SLEEP_MODE		= 0x09,
+	CINERGYT2_EP1_GET_FIRMWARE_VERSION	= 0x0A
+};
+
+
+struct dvbt_get_status_msg {
+	uint32_t freq;
+	uint8_t bandwidth;
+	uint16_t tps;
+	uint8_t flags;
+	uint16_t gain;
+	uint8_t snr;
+	uint32_t viterbi_error_rate;
+	uint32_t rs_error_rate;
+	uint32_t uncorrected_block_count;
+	uint8_t lock_bits;
+	uint8_t prev_lock_bits;
+} __attribute__((packed));
+
+
+struct dvbt_set_parameters_msg {
+	uint8_t cmd;
+	uint32_t freq;
+	uint8_t bandwidth;
+	uint16_t tps;
+	uint8_t flags;
+} __attribute__((packed));
+
+
+extern struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d);
+
+#endif /* _DVB_USB_CINERGYT2_H_ */
+

drivers/media/dvb/dvb-usb/dib0700.h

@@ -31,6 +31,8 @@ extern int dvb_usb_dib0700_debug;
 	// 2 Byte: MPEG2 mode:  4MSB(1 = Master Mode, 0 = Slave Mode) 4LSB(Channel 1 = bit0, Channel 2 = bit1)
 	// 2 Byte: Analog mode: 4MSB(0 = 625 lines, 1 = 525 lines)    4LSB(     "                "           )
 #define REQUEST_SET_RC       0x11
+#define REQUEST_NEW_I2C_READ 0x12
+#define REQUEST_NEW_I2C_WRITE 0x13
 #define REQUEST_GET_VERSION  0x15
 
 struct dib0700_state {
@@ -39,6 +41,8 @@ struct dib0700_state {
 	u8 rc_toggle;
 	u8 rc_counter;
 	u8 is_dib7000pc;
+	u8 fw_use_new_i2c_api;
+	u8 disable_streaming_master_mode;
 };
 
 extern int dib0700_set_gpio(struct dvb_usb_device *, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val);

drivers/media/dvb/dvb-usb/dw2102.h

@@ -4,6 +4,5 @@
 #define DVB_USB_LOG_PREFIX "dw2102"
 #include "dvb-usb.h"
 
-extern int dvb_usb_dw2102_debug;
 #define deb_xfer(args...) dprintk(dvb_usb_dw2102_debug, 0x02, args)
 #endif

drivers/media/dvb/frontends/Makefile

@@ -48,3 +48,10 @@ obj-$(CONFIG_DVB_TUNER_ITD1000) += itd1000.o
 obj-$(CONFIG_DVB_AU8522) += au8522.o
 obj-$(CONFIG_DVB_TDA10048) += tda10048.o
 obj-$(CONFIG_DVB_S5H1411) += s5h1411.o
+obj-$(CONFIG_DVB_LGS8GL5) += lgs8gl5.o
+obj-$(CONFIG_DVB_DUMMY_FE) += dvb_dummy_fe.o
+obj-$(CONFIG_DVB_AF9013) += af9013.o
+obj-$(CONFIG_DVB_CX24116) += cx24116.o
+obj-$(CONFIG_DVB_SI21XX) += si21xx.o
+obj-$(CONFIG_DVB_STV0288) += stv0288.o
+obj-$(CONFIG_DVB_STB6000) += stb6000.o

drivers/media/dvb/frontends/dib7000p.c

@@ -1333,7 +1333,8 @@ struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr,
 	/* Ensure the output mode remains at the previous default if it's
 	 * not specifically set by the caller.
 	 */
-	if (st->cfg.output_mode != OUTMODE_MPEG2_SERIAL)
+	if ((st->cfg.output_mode != OUTMODE_MPEG2_SERIAL) &&
+	    (st->cfg.output_mode != OUTMODE_MPEG2_PAR_GATED_CLK))
 		st->cfg.output_mode = OUTMODE_MPEG2_FIFO;
 
 	demod                   = &st->demod;

drivers/media/dvb/ttpci/Kconfig

@@ -86,6 +86,7 @@ config DVB_BUDGET
 	select DVB_TDA10086 if !DVB_FE_CUSTOMISE
 	select DVB_TDA826X if !DVB_FE_CUSTOMISE
 	select DVB_LNBP21 if !DVB_FE_CUSTOMISE
+	select DVB_TDA1004X if !DVB_FE_CUSTOMISE
 	help
 	  Support for simple SAA7146 based DVB cards (so called Budget-
 	  or Nova-PCI cards) without onboard MPEG2 decoder, and without