Commit cf78c0c4 authored by Takashi Iwai's avatar Takashi Iwai

Merge branch 'for-2.6.37' of...

Merge branch 'for-2.6.37' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into fix/asoc
parents 29c798fe 63f7526f
......@@ -58,7 +58,7 @@
(1000000000 / ((rate * 1000) / samples))
#define US_TO_SAMPLES(rate, us) \
(rate / (1000000 / us))
(rate / (1000000 / (us < 1000000 ? us : 1000000)))
#define UTHR_FROM_PERIOD_SIZE(samples, playrate, burstrate) \
((samples * 5000) / ((burstrate * 5000) / (burstrate - playrate)))
......@@ -200,7 +200,7 @@ static int dac33_read(struct snd_soc_codec *codec, unsigned int reg,
u8 *value)
{
struct tlv320dac33_priv *dac33 = snd_soc_codec_get_drvdata(codec);
int val;
int val, ret = 0;
*value = reg & 0xff;
......@@ -210,6 +210,7 @@ static int dac33_read(struct snd_soc_codec *codec, unsigned int reg,
if (val < 0) {
dev_err(codec->dev, "Read failed (%d)\n", val);
value[0] = dac33_read_reg_cache(codec, reg);
ret = val;
} else {
value[0] = val;
dac33_write_reg_cache(codec, reg, val);
......@@ -218,7 +219,7 @@ static int dac33_read(struct snd_soc_codec *codec, unsigned int reg,
value[0] = dac33_read_reg_cache(codec, reg);
}
return 0;
return ret;
}
static int dac33_write(struct snd_soc_codec *codec, unsigned int reg,
......@@ -329,13 +330,18 @@ static void dac33_init_chip(struct snd_soc_codec *codec)
dac33_read_reg_cache(codec, DAC33_LINER_TO_RLO_VOL));
}
static inline void dac33_read_id(struct snd_soc_codec *codec)
static inline int dac33_read_id(struct snd_soc_codec *codec)
{
int i, ret = 0;
u8 reg;
dac33_read(codec, DAC33_DEVICE_ID_MSB, &reg);
dac33_read(codec, DAC33_DEVICE_ID_LSB, &reg);
dac33_read(codec, DAC33_DEVICE_REV_ID, &reg);
for (i = 0; i < 3; i++) {
ret = dac33_read(codec, DAC33_DEVICE_ID_MSB + i, &reg);
if (ret < 0)
break;
}
return ret;
}
static inline void dac33_soft_power(struct snd_soc_codec *codec, int power)
......@@ -1076,6 +1082,9 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream)
/* Number of samples under i2c latency */
dac33->alarm_threshold = US_TO_SAMPLES(rate,
dac33->mode1_latency);
nsample_limit = DAC33_BUFFER_SIZE_SAMPLES -
dac33->alarm_threshold;
if (dac33->auto_fifo_config) {
if (period_size <= dac33->alarm_threshold)
/*
......@@ -1086,6 +1095,8 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream)
((dac33->alarm_threshold / period_size) +
(dac33->alarm_threshold % period_size ?
1 : 0));
else if (period_size > nsample_limit)
dac33->nsample = nsample_limit;
else
dac33->nsample = period_size;
} else {
......@@ -1097,8 +1108,7 @@ static void dac33_calculate_times(struct snd_pcm_substream *substream)
*/
dac33->nsample_max = substream->runtime->buffer_size -
period_size;
nsample_limit = DAC33_BUFFER_SIZE_SAMPLES -
dac33->alarm_threshold;
if (dac33->nsample_max > nsample_limit)
dac33->nsample_max = nsample_limit;
......@@ -1414,9 +1424,15 @@ static int dac33_soc_probe(struct snd_soc_codec *codec)
dev_err(codec->dev, "Failed to power up codec: %d\n", ret);
goto err_power;
}
dac33_read_id(codec);
ret = dac33_read_id(codec);
dac33_hard_power(codec, 0);
if (ret < 0) {
dev_err(codec->dev, "Failed to read chip ID: %d\n", ret);
ret = -ENODEV;
goto err_power;
}
/* Check if the IRQ number is valid and request it */
if (dac33->irq >= 0) {
ret = request_irq(dac33->irq, dac33_interrupt_handler,
......
......@@ -125,7 +125,7 @@ static int tpa6130a2_power(int power)
data = i2c_get_clientdata(tpa6130a2_client);
mutex_lock(&data->mutex);
if (power) {
if (power && !data->power_state) {
/* Power on */
if (data->power_gpio >= 0)
gpio_set_value(data->power_gpio, 1);
......@@ -153,7 +153,7 @@ static int tpa6130a2_power(int power)
val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
val &= ~TPA6130A2_SWS;
tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
} else {
} else if (!power && data->power_state) {
/* set SWS */
val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
val |= TPA6130A2_SWS;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment