Skip to content

L
linux
Commit cfbf7586 authored by Mike Frysinger's avatar Mike Frysinger Committed by David S. Miller
Browse files
Options

can: bfin_can: auto-calculate accessor sizes 

Since we have a struct that defines the sizes of the registers, we don't
need to explicitly use the 16bit read/write helpers.  Let the code figure
out which size access to make based on the size of the C type.

There should be no functional changes here.
Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
Acked-by: default avatarWolfgang Grandegger <wg@grandegger.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 9118f08a
Show whitespace changes
Inline Side-by-side
Showing with 59 additions and 59 deletions
drivers/net/can/bfin_can.c
View file @ cfbf7586
......@@ -79,8 +79,8 @@ static int bfin_can_set_bittiming(struct net_device *dev)
if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
timing |= SAM;
bfin_write16(&reg->clock, clk);
bfin_write16(&reg->timing, timing);
bfin_write(&reg->clock, clk);
bfin_write(&reg->timing, timing);
dev_info(dev->dev.parent, "setting CLOCK=0x%04x TIMING=0x%04x\n",
clk, timing);
......@@ -96,16 +96,16 @@ static void bfin_can_set_reset_mode(struct net_device *dev)
int i;
/* disable interrupts */
bfin_write16(&reg->mbim1, 0);
bfin_write16(&reg->mbim2, 0);
bfin_write16(&reg->gim, 0);
bfin_write(&reg->mbim1, 0);
bfin_write(&reg->mbim2, 0);
bfin_write(&reg->gim, 0);
/* reset can and enter configuration mode */
bfin_write16(&reg->control, SRS | CCR);
bfin_write(&reg->control, SRS | CCR);
SSYNC();
bfin_write16(&reg->control, CCR);
bfin_write(&reg->control, CCR);
SSYNC();
while (!(bfin_read16(&reg->control) & CCA)) {
while (!(bfin_read(&reg->control) & CCA)) {
udelay(10);
if (--timeout == 0) {
dev_err(dev->dev.parent,
......@@ -119,33 +119,33 @@ static void bfin_can_set_reset_mode(struct net_device *dev)
* by writing to CAN Mailbox Configuration Registers 1 and 2
* For all bits: 0 - Mailbox disabled, 1 - Mailbox enabled
*/
bfin_write16(&reg->mc1, 0);
bfin_write16(&reg->mc2, 0);
bfin_write(&reg->mc1, 0);
bfin_write(&reg->mc2, 0);
/* Set Mailbox Direction */
bfin_write16(&reg->md1, 0xFFFF); /* mailbox 1-16 are RX */
bfin_write16(&reg->md2, 0); /* mailbox 17-32 are TX */
bfin_write(&reg->md1, 0xFFFF); /* mailbox 1-16 are RX */
bfin_write(&reg->md2, 0); /* mailbox 17-32 are TX */
/* RECEIVE_STD_CHL */
for (i = 0; i < 2; i++) {
bfin_write16(&reg->chl[RECEIVE_STD_CHL + i].id0, 0);
bfin_write16(&reg->chl[RECEIVE_STD_CHL + i].id1, AME);
bfin_write16(&reg->chl[RECEIVE_STD_CHL + i].dlc, 0);
bfin_write16(&reg->msk[RECEIVE_STD_CHL + i].amh, 0x1FFF);
bfin_write16(&reg->msk[RECEIVE_STD_CHL + i].aml, 0xFFFF);
bfin_write(&reg->chl[RECEIVE_STD_CHL + i].id0, 0);
bfin_write(&reg->chl[RECEIVE_STD_CHL + i].id1, AME);
bfin_write(&reg->chl[RECEIVE_STD_CHL + i].dlc, 0);
bfin_write(&reg->msk[RECEIVE_STD_CHL + i].amh, 0x1FFF);
bfin_write(&reg->msk[RECEIVE_STD_CHL + i].aml, 0xFFFF);
}
/* RECEIVE_EXT_CHL */
for (i = 0; i < 2; i++) {
bfin_write16(&reg->chl[RECEIVE_EXT_CHL + i].id0, 0);
bfin_write16(&reg->chl[RECEIVE_EXT_CHL + i].id1, AME | IDE);
bfin_write16(&reg->chl[RECEIVE_EXT_CHL + i].dlc, 0);
bfin_write16(&reg->msk[RECEIVE_EXT_CHL + i].amh, 0x1FFF);
bfin_write16(&reg->msk[RECEIVE_EXT_CHL + i].aml, 0xFFFF);
bfin_write(&reg->chl[RECEIVE_EXT_CHL + i].id0, 0);
bfin_write(&reg->chl[RECEIVE_EXT_CHL + i].id1, AME | IDE);
bfin_write(&reg->chl[RECEIVE_EXT_CHL + i].dlc, 0);
bfin_write(&reg->msk[RECEIVE_EXT_CHL + i].amh, 0x1FFF);
bfin_write(&reg->msk[RECEIVE_EXT_CHL + i].aml, 0xFFFF);
}
bfin_write16(&reg->mc2, BIT(TRANSMIT_CHL - 16));
bfin_write16(&reg->mc1, BIT(RECEIVE_STD_CHL) + BIT(RECEIVE_EXT_CHL));
bfin_write(&reg->mc2, BIT(TRANSMIT_CHL - 16));
bfin_write(&reg->mc1, BIT(RECEIVE_STD_CHL) + BIT(RECEIVE_EXT_CHL));
SSYNC();
priv->can.state = CAN_STATE_STOPPED;
......@@ -160,9 +160,9 @@ static void bfin_can_set_normal_mode(struct net_device *dev)
/*
* leave configuration mode
*/
bfin_write16(&reg->control, bfin_read16(&reg->control) & ~CCR);
bfin_write(&reg->control, bfin_read(&reg->control) & ~CCR);
while (bfin_read16(&reg->status) & CCA) {
while (bfin_read(&reg->status) & CCA) {
udelay(10);
if (--timeout == 0) {
dev_err(dev->dev.parent,
......@@ -174,25 +174,25 @@ static void bfin_can_set_normal_mode(struct net_device *dev)
/*
* clear _All_ tx and rx interrupts
*/
bfin_write16(&reg->mbtif1, 0xFFFF);
bfin_write16(&reg->mbtif2, 0xFFFF);
bfin_write16(&reg->mbrif1, 0xFFFF);
bfin_write16(&reg->mbrif2, 0xFFFF);
bfin_write(&reg->mbtif1, 0xFFFF);
bfin_write(&reg->mbtif2, 0xFFFF);
bfin_write(&reg->mbrif1, 0xFFFF);
bfin_write(&reg->mbrif2, 0xFFFF);
/*
* clear global interrupt status register
*/
bfin_write16(&reg->gis, 0x7FF); /* overwrites with '1' */
bfin_write(&reg->gis, 0x7FF); /* overwrites with '1' */
/*
* Initialize Interrupts
* - set bits in the mailbox interrupt mask register
* - global interrupt mask
*/
bfin_write16(&reg->mbim1, BIT(RECEIVE_STD_CHL) + BIT(RECEIVE_EXT_CHL));
bfin_write16(&reg->mbim2, BIT(TRANSMIT_CHL - 16));
bfin_write(&reg->mbim1, BIT(RECEIVE_STD_CHL) + BIT(RECEIVE_EXT_CHL));
bfin_write(&reg->mbim2, BIT(TRANSMIT_CHL - 16));
bfin_write16(&reg->gim, EPIM | BOIM | RMLIM);
bfin_write(&reg->gim, EPIM | BOIM | RMLIM);
SSYNC();
}
......@@ -242,28 +242,28 @@ static int bfin_can_start_xmit(struct sk_buff *skb, struct net_device *dev)
/* fill id */
if (id & CAN_EFF_FLAG) {
bfin_write16(&reg->chl[TRANSMIT_CHL].id0, id);
bfin_write(&reg->chl[TRANSMIT_CHL].id0, id);
val = ((id & 0x1FFF0000) >> 16) | IDE;
} else
val = (id << 2);
if (id & CAN_RTR_FLAG)
val |= RTR;
bfin_write16(&reg->chl[TRANSMIT_CHL].id1, val | AME);
bfin_write(&reg->chl[TRANSMIT_CHL].id1, val | AME);
/* fill payload */
for (i = 0; i < 8; i += 2) {
val = ((7 - i) < dlc ? (data[7 - i]) : 0) +
((6 - i) < dlc ? (data[6 - i] << 8) : 0);
bfin_write16(&reg->chl[TRANSMIT_CHL].data[i], val);
bfin_write(&reg->chl[TRANSMIT_CHL].data[i], val);
}
/* fill data length code */
bfin_write16(&reg->chl[TRANSMIT_CHL].dlc, dlc);
bfin_write(&reg->chl[TRANSMIT_CHL].dlc, dlc);
can_put_echo_skb(skb, dev, 0);
/* set transmit request */
bfin_write16(&reg->trs2, BIT(TRANSMIT_CHL - 16));
bfin_write(&reg->trs2, BIT(TRANSMIT_CHL - 16));
return 0;
}
......@@ -286,26 +286,26 @@ static void bfin_can_rx(struct net_device *dev, u16 isrc)
/* get id */
if (isrc & BIT(RECEIVE_EXT_CHL)) {
/* extended frame format (EFF) */
cf->can_id = ((bfin_read16(&reg->chl[RECEIVE_EXT_CHL].id1)
cf->can_id = ((bfin_read(&reg->chl[RECEIVE_EXT_CHL].id1)
& 0x1FFF) << 16)
+ bfin_read16(&reg->chl[RECEIVE_EXT_CHL].id0);
+ bfin_read(&reg->chl[RECEIVE_EXT_CHL].id0);
cf->can_id |= CAN_EFF_FLAG;
obj = RECEIVE_EXT_CHL;
} else {
/* standard frame format (SFF) */
cf->can_id = (bfin_read16(&reg->chl[RECEIVE_STD_CHL].id1)
cf->can_id = (bfin_read(&reg->chl[RECEIVE_STD_CHL].id1)
& 0x1ffc) >> 2;
obj = RECEIVE_STD_CHL;
}
if (bfin_read16(&reg->chl[obj].id1) & RTR)
if (bfin_read(&reg->chl[obj].id1) & RTR)
cf->can_id |= CAN_RTR_FLAG;
/* get data length code */
cf->can_dlc = get_can_dlc(bfin_read16(&reg->chl[obj].dlc) & 0xF);
cf->can_dlc = get_can_dlc(bfin_read(&reg->chl[obj].dlc) & 0xF);
/* get payload */
for (i = 0; i < 8; i += 2) {
val = bfin_read16(&reg->chl[obj].data[i]);
val = bfin_read(&reg->chl[obj].data[i]);
cf->data[7 - i] = (7 - i) < cf->can_dlc ? val : 0;
cf->data[6 - i] = (6 - i) < cf->can_dlc ? (val >> 8) : 0;
}
......@@ -359,7 +359,7 @@ static int bfin_can_err(struct net_device *dev, u16 isrc, u16 status)
if (state != priv->can.state && (state == CAN_STATE_ERROR_WARNING ||
state == CAN_STATE_ERROR_PASSIVE)) {
u16 cec = bfin_read16(&reg->cec);
u16 cec = bfin_read(&reg->cec);
u8 rxerr = cec;
u8 txerr = cec >> 8;
......@@ -410,23 +410,23 @@ irqreturn_t bfin_can_interrupt(int irq, void *dev_id)
struct net_device_stats *stats = &dev->stats;
u16 status, isrc;
if ((irq == priv->tx_irq) && bfin_read16(&reg->mbtif2)) {
if ((irq == priv->tx_irq) && bfin_read(&reg->mbtif2)) {
/* transmission complete interrupt */
bfin_write16(&reg->mbtif2, 0xFFFF);
bfin_write(&reg->mbtif2, 0xFFFF);
stats->tx_packets++;
stats->tx_bytes += bfin_read16(&reg->chl[TRANSMIT_CHL].dlc);
stats->tx_bytes += bfin_read(&reg->chl[TRANSMIT_CHL].dlc);
can_get_echo_skb(dev, 0);
netif_wake_queue(dev);
} else if ((irq == priv->rx_irq) && bfin_read16(&reg->mbrif1)) {
} else if ((irq == priv->rx_irq) && bfin_read(&reg->mbrif1)) {
/* receive interrupt */
isrc = bfin_read16(&reg->mbrif1);
bfin_write16(&reg->mbrif1, 0xFFFF);
isrc = bfin_read(&reg->mbrif1);
bfin_write(&reg->mbrif1, 0xFFFF);
bfin_can_rx(dev, isrc);
} else if ((irq == priv->err_irq) && bfin_read16(&reg->gis)) {
} else if ((irq == priv->err_irq) && bfin_read(&reg->gis)) {
/* error interrupt */
isrc = bfin_read16(&reg->gis);
status = bfin_read16(&reg->esr);
bfin_write16(&reg->gis, 0x7FF);
isrc = bfin_read(&reg->gis);
status = bfin_read(&reg->esr);
bfin_write(&reg->gis, 0x7FF);
bfin_can_err(dev, isrc, status);
} else {
return IRQ_NONE;
......@@ -631,9 +631,9 @@ static int bfin_can_suspend(struct platform_device *pdev, pm_message_t mesg)
if (netif_running(dev)) {
/* enter sleep mode */
bfin_write16(&reg->control, bfin_read16(&reg->control) | SMR);
bfin_write(&reg->control, bfin_read(&reg->control) | SMR);
SSYNC();
while (!(bfin_read16(&reg->intr) & SMACK)) {
while (!(bfin_read(&reg->intr) & SMACK)) {
udelay(10);
if (--timeout == 0) {
dev_err(dev->dev.parent,
......@@ -654,7 +654,7 @@ static int bfin_can_resume(struct platform_device *pdev)
if (netif_running(dev)) {
/* leave sleep mode */
bfin_write16(&reg->intr, 0);
bfin_write(&reg->intr, 0);
SSYNC();
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7