Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal

Pull thermal management updates from Eduardo Valentin:

 - rework tsens driver to add support for tsens-v2 (Amit Kucheria)

 - rework armada thermal driver to use syscon and multichannel support
   (Miquel Raynal)

 - fixes to TI SoC, IMX, Exynos, RCar, and hwmon drivers

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: (34 commits)
  thermal: armada: fix copy-paste error in armada_thermal_probe()
  thermal: rcar_thermal: avoid NULL dereference in absence of IRQ resources
  thermal: samsung: Remove Exynos5440 clock handling left-overs
  thermal: tsens: Fix negative temperature reporting
  thermal: tsens: switch from of_iomap() to devm_ioremap_resource()
  thermal: tsens: Rename variable
  thermal: tsens: Add generic support for TSENS v2 IP
  thermal: tsens: Rename tsens-8996 to tsens-v2 for reuse
  thermal: tsens: Add support to split up register address space into two
  dt: thermal: tsens: Document the fallback DT property for v2 of TSENS IP
  thermal: tsens: Get rid of unused fields in structure
  thermal_hwmon: Pass the originating device down to hwmon_device_register_with_info
  thermal_hwmon: Sanitize attribute name passed to hwmon
  dt-bindings: thermal: armada: add reference to new bindings
  dt-bindings: cp110: add the thermal node in the syscon file
  dt-bindings: cp110: update documentation since DT de-duplication
  dt-bindings: ap806: add the thermal node in the syscon file
  dt-bindings: cp110: prepare the syscon file to list other syscons nodes
  dt-bindings: ap806: prepare the syscon file to list other syscons nodes
  dt-bindings: cp110: rename cp110 syscon file
  ...

Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt

@@ -2,14 +2,17 @@ Marvell Armada AP806 System Controller
 ======================================
 
 The AP806 is one of the two core HW blocks of the Marvell Armada 7K/8K
-SoCs. It contains a system controller, which provides a number
-registers giving access to numerous features: clocks, pin-muxing and
-many other SoC configuration items. This DT binding allows to describe
-this system controller.
+SoCs. It contains system controllers, which provide several registers
+giving access to numerous features: clocks, pin-muxing and many other
+SoC configuration items. This DT binding allows to describe these
+system controllers.
 
 For the top level node:
  - compatible: must be: "syscon", "simple-mfd";
-  - reg: register area of the AP806 system controller
+ - reg: register area of the AP806 system controller
+
+SYSTEM CONTROLLER 0
+===================
 
 Clocks:
 -------
@@ -98,3 +101,38 @@ ap_syscon: system-controller@6f4000 {
 		gpio-ranges = <&ap_pinctrl 0 0 19>;
 	};
 };
+
+SYSTEM CONTROLLER 1
+===================
+
+Thermal:
+--------
+
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/thermal/thermal.txt
+
+The thermal IP can probe the temperature all around the processor. It
+may feature several channels, each of them wired to one sensor.
+
+Required properties:
+- compatible: must be one of:
+  * marvell,armada-ap806-thermal
+- reg: register range associated with the thermal functions.
+
+Optional properties:
+- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
+  to this IP and represents the channel ID. There is one sensor per
+  channel. O refers to the thermal IP internal channel, while positive
+  IDs refer to each CPU.
+
+Example:
+ap_syscon1: system-controller@6f8000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x6f8000 0x1000>;
+
+	ap_thermal: thermal-sensor@80 {
+		compatible = "marvell,armada-ap806-thermal";
+		reg = <0x80 0x10>;
+		#thermal-sensor-cells = <1>;
+	};
+};

Documentation/devicetree/bindings/arm/marvell/cp110-system-controller0.txt → Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt

-Marvell Armada CP110 System Controller 0
-========================================
+Marvell Armada CP110 System Controller
+======================================
 
 The CP110 is one of the two core HW blocks of the Marvell Armada 7K/8K
-SoCs. It contains two sets of system control registers, System
-Controller 0 and System Controller 1. This Device Tree binding allows
-to describe the first system controller, which provides registers to
-configure various aspects of the SoC.
+SoCs. It contains system controllers, which provide several registers
+giving access to numerous features: clocks, pin-muxing and many other
+SoC configuration items. This DT binding allows to describe these
+system controllers.
 
 For the top level node:
  - compatible: must be: "syscon", "simple-mfd";
- - reg: register area of the CP110 system controller 0
+ - reg: register area of the CP110 system controller
+
+SYSTEM CONTROLLER 0
+===================
 
 Clocks:
 -------
@@ -163,26 +166,60 @@ Required properties:
 
 Example:
 
-cpm_syscon0: system-controller@440000 {
+CP110_LABEL(syscon0): system-controller@440000 {
 	compatible = "syscon", "simple-mfd";
 	reg = <0x440000 0x1000>;
 
-	cpm_clk: clock {
+	CP110_LABEL(clk): clock {
 		compatible = "marvell,cp110-clock";
 		#clock-cells = <2>;
 	};
 
-	cpm_pinctrl: pinctrl {
+	CP110_LABEL(pinctrl): pinctrl {
 		compatible = "marvell,armada-8k-cpm-pinctrl";
 	};
 
-	cpm_gpio1: gpio@100 {
+	CP110_LABEL(gpio1): gpio@100 {
 		compatible = "marvell,armada-8k-gpio";
 		offset = <0x100>;
 		ngpios = <32>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		gpio-ranges = <&cpm_pinctrl 0 0 32>;
+		gpio-ranges = <&CP110_LABEL(pinctrl) 0 0 32>;
 	};
 
 };
+
+SYSTEM CONTROLLER 1
+===================
+
+Thermal:
+--------
+
+The thermal IP can probe the temperature all around the processor. It
+may feature several channels, each of them wired to one sensor.
+
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/thermal/thermal.txt
+
+Required properties:
+- compatible: must be one of:
+  * marvell,armada-cp110-thermal
+- reg: register range associated with the thermal functions.
+
+Optional properties:
+- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
+  to this IP and represents the channel ID. There is one sensor per
+  channel. O refers to the thermal IP internal channel.
+
+Example:
+CP110_LABEL(syscon1): system-controller@6f8000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x6f8000 0x1000>;
+
+	CP110_LABEL(thermal): thermal-sensor@70 {
+		compatible = "marvell,armada-cp110-thermal";
+		reg = <0x70 0x10>;
+		#thermal-sensor-cells = <1>;
+	};
+};

Documentation/devicetree/bindings/thermal/armada-thermal.txt

@@ -10,6 +10,11 @@ Required properties:
     * marvell,armada-ap806-thermal
     * marvell,armada-cp110-thermal
 
+Note: these bindings are deprecated for AP806/CP110 and should instead
+follow the rules described in:
+Documentation/devicetree/bindings/arm/marvell/ap806-system-controller.txt
+Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt
+
 - reg: Device's register space.
   Two entries are expected, see the examples below. The first one points
   to the status register (4B). The second one points to the control

Documentation/devicetree/bindings/thermal/qcom-tsens.txt

 * QCOM SoC Temperature Sensor (TSENS)
 
 Required properties:
-- compatible :
- - "qcom,msm8916-tsens" : For 8916 Family of SoCs
- - "qcom,msm8974-tsens" : For 8974 Family of SoCs
- - "qcom,msm8996-tsens" : For 8996 Family of SoCs
+- compatible:
+  Must be one of the following:
+    - "qcom,msm8916-tsens" (MSM8916)
+    - "qcom,msm8974-tsens" (MSM8974)
+    - "qcom,msm8996-tsens" (MSM8996)
+    - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998)
+    - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845)
+  The generic "qcom,tsens-v2" property must be used as a fallback for any SoC
+  with version 2 of the TSENS IP. MSM8996 is the only exception because the
+  generic property did not exist when support was added.
+
+- reg: Address range of the thermal registers.
+  New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM
+  register spaces separately, with order being TM before SROT.
+  See Example 2, below.
 
-- reg: Address range of the thermal registers
 - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
 - #qcom,sensors: Number of sensors in tsens block
 - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
 nvmem cells
 
-Example:
+Example 1 (legacy support before a fallback tsens-v2 property was introduced):
 tsens: thermal-sensor@900000 {
 		compatible = "qcom,msm8916-tsens";
 		reg = <0x4a8000 0x2000>;
@@ -20,3 +30,12 @@ tsens: thermal-sensor@900000 {
 		nvmem-cell-names = "caldata", "calsel";
 		#thermal-sensor-cells = <1>;
 	};
+
+Example 2 (for any platform containing v2 of the TSENS IP):
+tsens0: thermal-sensor@c263000 {
+		compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+		reg = <0xc263000 0x1ff>, /* TM */
+			<0xc222000 0x1ff>; /* SROT */
+		#qcom,sensors = <13>;
+		#thermal-sensor-cells = <1>;
+	};

drivers/thermal/armada_thermal.c

@@ -24,6 +24,8 @@
 #include <linux/of_device.h>
 #include <linux/thermal.h>
 #include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 /* Thermal Manager Control and Status Register */
 #define PMU_TDC0_SW_RST_MASK		(0x1 << 1)
@@ -39,24 +41,24 @@
 #define A375_READOUT_INVERT		BIT(15)
 #define A375_HW_RESETn			BIT(8)
 
-/* Legacy bindings */
-#define LEGACY_CONTROL_MEM_LEN		0x4
-
-/* Current bindings with the 2 control registers under the same memory area */
-#define LEGACY_CONTROL1_OFFSET		0x0
-#define CONTROL0_OFFSET			0x0
-#define CONTROL1_OFFSET			0x4
-
 /* Errata fields */
 #define CONTROL0_TSEN_TC_TRIM_MASK	0x7
 #define CONTROL0_TSEN_TC_TRIM_VAL	0x3
 
-/* TSEN refers to the temperature sensors within the AP */
 #define CONTROL0_TSEN_START		BIT(0)
 #define CONTROL0_TSEN_RESET		BIT(1)
 #define CONTROL0_TSEN_ENABLE		BIT(2)
-
-/* EXT_TSEN refers to the external temperature sensors, out of the AP */
+#define CONTROL0_TSEN_AVG_BYPASS	BIT(6)
+#define CONTROL0_TSEN_CHAN_SHIFT	13
+#define CONTROL0_TSEN_CHAN_MASK		0xF
+#define CONTROL0_TSEN_OSR_SHIFT		24
+#define CONTROL0_TSEN_OSR_MAX		0x3
+#define CONTROL0_TSEN_MODE_SHIFT	30
+#define CONTROL0_TSEN_MODE_EXTERNAL	0x2
+#define CONTROL0_TSEN_MODE_MASK		0x3
+
+#define CONTROL1_TSEN_AVG_SHIFT		0
+#define CONTROL1_TSEN_AVG_MASK		0x7
 #define CONTROL1_EXT_TSEN_SW_RESET	BIT(7)
 #define CONTROL1_EXT_TSEN_HW_RESETn	BIT(8)
 
@@ -67,19 +69,19 @@ struct armada_thermal_data;
 
 /* Marvell EBU Thermal Sensor Dev Structure */
 struct armada_thermal_priv {
-	void __iomem *status;
-	void __iomem *control0;
-	void __iomem *control1;
+	struct device *dev;
+	struct regmap *syscon;
+	char zone_name[THERMAL_NAME_LENGTH];
+	/* serialize temperature reads/updates */
+	struct mutex update_lock;
 	struct armada_thermal_data *data;
+	int current_channel;
 };
 
 struct armada_thermal_data {
-	/* Initialize the sensor */
-	void (*init_sensor)(struct platform_device *pdev,
-			    struct armada_thermal_priv *);
-
-	/* Test for a valid sensor value (optional) */
-	bool (*is_valid)(struct armada_thermal_priv *);
+	/* Initialize the thermal IC */
+	void (*init)(struct platform_device *pdev,
+		     struct armada_thermal_priv *priv);
 
 	/* Formula coeficients: temp = (b - m * reg) / div */
 	s64 coef_b;
@@ -92,141 +94,242 @@ struct armada_thermal_data {
 	unsigned int temp_shift;
 	unsigned int temp_mask;
 	u32 is_valid_bit;
-	bool needs_control0;
+
+	/* Syscon access */
+	unsigned int syscon_control0_off;
+	unsigned int syscon_control1_off;
+	unsigned int syscon_status_off;
+
+	/* One sensor is in the thermal IC, the others are in the CPUs if any */
+	unsigned int cpu_nr;
 };
 
-static void armadaxp_init_sensor(struct platform_device *pdev,
-				 struct armada_thermal_priv *priv)
+struct armada_drvdata {
+	enum drvtype {
+		LEGACY,
+		SYSCON
+	} type;
+	union {
+		struct armada_thermal_priv *priv;
+		struct thermal_zone_device *tz;
+	} data;
+};
+
+/*
+ * struct armada_thermal_sensor - hold the information of one thermal sensor
+ * @thermal: pointer to the local private structure
+ * @tzd: pointer to the thermal zone device
+ * @id: identifier of the thermal sensor
+ */
+struct armada_thermal_sensor {
+	struct armada_thermal_priv *priv;
+	int id;
+};
+
+static void armadaxp_init(struct platform_device *pdev,
+			  struct armada_thermal_priv *priv)
 {
+	struct armada_thermal_data *data = priv->data;
 	u32 reg;
 
-	reg = readl_relaxed(priv->control1);
+	regmap_read(priv->syscon, data->syscon_control1_off, &reg);
 	reg |= PMU_TDC0_OTF_CAL_MASK;
-	writel(reg, priv->control1);
 
 	/* Reference calibration value */
 	reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
 	reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
-	writel(reg, priv->control1);
 
 	/* Reset the sensor */
-	reg = readl_relaxed(priv->control1);
-	writel((reg | PMU_TDC0_SW_RST_MASK), priv->control1);
+	reg |= PMU_TDC0_SW_RST_MASK;
 
-	writel(reg, priv->control1);
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
 
 	/* Enable the sensor */
-	reg = readl_relaxed(priv->status);
+	regmap_read(priv->syscon, data->syscon_status_off, &reg);
 	reg &= ~PMU_TM_DISABLE_MASK;
-	writel(reg, priv->status);
+	regmap_write(priv->syscon, data->syscon_status_off, reg);
 }
 
-static void armada370_init_sensor(struct platform_device *pdev,
-				  struct armada_thermal_priv *priv)
+static void armada370_init(struct platform_device *pdev,
+			   struct armada_thermal_priv *priv)
 {
+	struct armada_thermal_data *data = priv->data;
 	u32 reg;
 
-	reg = readl_relaxed(priv->control1);
+	regmap_read(priv->syscon, data->syscon_control1_off, &reg);
 	reg |= PMU_TDC0_OTF_CAL_MASK;
-	writel(reg, priv->control1);
 
 	/* Reference calibration value */
 	reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
 	reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
-	writel(reg, priv->control1);
 
+	/* Reset the sensor */
 	reg &= ~PMU_TDC0_START_CAL_MASK;
-	writel(reg, priv->control1);
+
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
 
 	msleep(10);
 }
 
-static void armada375_init_sensor(struct platform_device *pdev,
-				  struct armada_thermal_priv *priv)
+static void armada375_init(struct platform_device *pdev,
+			   struct armada_thermal_priv *priv)
 {
+	struct armada_thermal_data *data = priv->data;
 	u32 reg;
 
-	reg = readl(priv->control1);
+	regmap_read(priv->syscon, data->syscon_control1_off, &reg);
 	reg &= ~(A375_UNIT_CONTROL_MASK << A375_UNIT_CONTROL_SHIFT);
 	reg &= ~A375_READOUT_INVERT;
 	reg &= ~A375_HW_RESETn;
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
 
-	writel(reg, priv->control1);
 	msleep(20);
 
 	reg |= A375_HW_RESETn;
-	writel(reg, priv->control1);
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
+
 	msleep(50);
 }
 
-static void armada_wait_sensor_validity(struct armada_thermal_priv *priv)
+static int armada_wait_sensor_validity(struct armada_thermal_priv *priv)
 {
 	u32 reg;
 
-	readl_relaxed_poll_timeout(priv->status, reg,
-				   reg & priv->data->is_valid_bit,
-				   STATUS_POLL_PERIOD_US,
-				   STATUS_POLL_TIMEOUT_US);
+	return regmap_read_poll_timeout(priv->syscon,
+					priv->data->syscon_status_off, reg,
+					reg & priv->data->is_valid_bit,
+					STATUS_POLL_PERIOD_US,
+					STATUS_POLL_TIMEOUT_US);
 }
 
-static void armada380_init_sensor(struct platform_device *pdev,
-				  struct armada_thermal_priv *priv)
+static void armada380_init(struct platform_device *pdev,
+			   struct armada_thermal_priv *priv)
 {
-	u32 reg = readl_relaxed(priv->control1);
+	struct armada_thermal_data *data = priv->data;
+	u32 reg;
 
 	/* Disable the HW/SW reset */
+	regmap_read(priv->syscon, data->syscon_control1_off, &reg);
 	reg |= CONTROL1_EXT_TSEN_HW_RESETn;
 	reg &= ~CONTROL1_EXT_TSEN_SW_RESET;
-	writel(reg, priv->control1);
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
 
 	/* Set Tsen Tc Trim to correct default value (errata #132698) */
-	if (priv->control0) {
-		reg = readl_relaxed(priv->control0);
-		reg &= ~CONTROL0_TSEN_TC_TRIM_MASK;
-		reg |= CONTROL0_TSEN_TC_TRIM_VAL;
-		writel(reg, priv->control0);
-	}
-
-	/* Wait the sensors to be valid or the core will warn the user */
-	armada_wait_sensor_validity(priv);
+	regmap_read(priv->syscon, data->syscon_control0_off, &reg);
+	reg &= ~CONTROL0_TSEN_TC_TRIM_MASK;
+	reg |= CONTROL0_TSEN_TC_TRIM_VAL;
+	regmap_write(priv->syscon, data->syscon_control0_off, reg);
 }
 
-static void armada_ap806_init_sensor(struct platform_device *pdev,
-				     struct armada_thermal_priv *priv)
+static void armada_ap806_init(struct platform_device *pdev,
+			      struct armada_thermal_priv *priv)
 {
+	struct armada_thermal_data *data = priv->data;
 	u32 reg;
 
-	reg = readl_relaxed(priv->control0);
+	regmap_read(priv->syscon, data->syscon_control0_off, &reg);
 	reg &= ~CONTROL0_TSEN_RESET;
 	reg |= CONTROL0_TSEN_START | CONTROL0_TSEN_ENABLE;
-	writel(reg, priv->control0);
 
-	/* Wait the sensors to be valid or the core will warn the user */
-	armada_wait_sensor_validity(priv);
+	/* Sample every ~2ms */
+	reg |= CONTROL0_TSEN_OSR_MAX << CONTROL0_TSEN_OSR_SHIFT;
+
+	/* Enable average (2 samples by default) */
+	reg &= ~CONTROL0_TSEN_AVG_BYPASS;
+
+	regmap_write(priv->syscon, data->syscon_control0_off, reg);
+}
+
+static void armada_cp110_init(struct platform_device *pdev,
+			      struct armada_thermal_priv *priv)
+{
+	struct armada_thermal_data *data = priv->data;
+	u32 reg;
+
+	armada380_init(pdev, priv);
+
+	/* Sample every ~2ms */
+	regmap_read(priv->syscon, data->syscon_control0_off, &reg);
+	reg |= CONTROL0_TSEN_OSR_MAX << CONTROL0_TSEN_OSR_SHIFT;
+	regmap_write(priv->syscon, data->syscon_control0_off, reg);
+
+	/* Average the output value over 2^1 = 2 samples */
+	regmap_read(priv->syscon, data->syscon_control1_off, &reg);
+	reg &= ~CONTROL1_TSEN_AVG_MASK << CONTROL1_TSEN_AVG_SHIFT;
+	reg |= 1 << CONTROL1_TSEN_AVG_SHIFT;
+	regmap_write(priv->syscon, data->syscon_control1_off, reg);
 }
 
 static bool armada_is_valid(struct armada_thermal_priv *priv)
 {
-	u32 reg = readl_relaxed(priv->status);
+	u32 reg;
+
+	if (!priv->data->is_valid_bit)
+		return true;
+
+	regmap_read(priv->syscon, priv->data->syscon_status_off, &reg);
 
 	return reg & priv->data->is_valid_bit;
 }
 
-static int armada_get_temp(struct thermal_zone_device *thermal,
-			   int *temp)
+/* There is currently no board with more than one sensor per channel */
+static int armada_select_channel(struct armada_thermal_priv *priv, int channel)
 {
-	struct armada_thermal_priv *priv = thermal->devdata;
-	u32 reg, div;
-	s64 sample, b, m;
+	struct armada_thermal_data *data = priv->data;
+	u32 ctrl0;
+
+	if (channel < 0 || channel > priv->data->cpu_nr)
+		return -EINVAL;
+
+	if (priv->current_channel == channel)
+		return 0;
+
+	/* Stop the measurements */
+	regmap_read(priv->syscon, data->syscon_control0_off, &ctrl0);
+	ctrl0 &= ~CONTROL0_TSEN_START;
+	regmap_write(priv->syscon, data->syscon_control0_off, ctrl0);
+
+	/* Reset the mode, internal sensor will be automatically selected */
+	ctrl0 &= ~(CONTROL0_TSEN_MODE_MASK << CONTROL0_TSEN_MODE_SHIFT);
+
+	/* Other channels are external and should be selected accordingly */
+	if (channel) {
+		/* Change the mode to external */
+		ctrl0 |= CONTROL0_TSEN_MODE_EXTERNAL <<
+			 CONTROL0_TSEN_MODE_SHIFT;
+		/* Select the sensor */
+		ctrl0 &= ~(CONTROL0_TSEN_CHAN_MASK << CONTROL0_TSEN_CHAN_SHIFT);
+		ctrl0 |= (channel - 1) << CONTROL0_TSEN_CHAN_SHIFT;
+	}
 
-	/* Valid check */
-	if (priv->data->is_valid && !priv->data->is_valid(priv)) {
-		dev_err(&thermal->device,
+	/* Actually set the mode/channel */
+	regmap_write(priv->syscon, data->syscon_control0_off, ctrl0);
+	priv->current_channel = channel;
+
+	/* Re-start the measurements */
+	ctrl0 |= CONTROL0_TSEN_START;
+	regmap_write(priv->syscon, data->syscon_control0_off, ctrl0);
+
+	/*
+	 * The IP has a latency of ~15ms, so after updating the selected source,
+	 * we must absolutely wait for the sensor validity bit to ensure we read
+	 * actual data.
+	 */
+	if (armada_wait_sensor_validity(priv)) {
+		dev_err(priv->dev,
 			"Temperature sensor reading not valid\n");
 		return -EIO;
 	}
 
-	reg = readl_relaxed(priv->status);
+	return 0;
+}
+
+static int armada_read_sensor(struct armada_thermal_priv *priv, int *temp)
+{
+	u32 reg, div;
+	s64 sample, b, m;
+
+	regmap_read(priv->syscon, priv->data->syscon_status_off, &reg);
 	reg = (reg >> priv->data->temp_shift) & priv->data->temp_mask;
 	if (priv->data->signed_sample)
 		/* The most significant bit is the sign bit */
@@ -247,45 +350,93 @@ static int armada_get_temp(struct thermal_zone_device *thermal,
 	return 0;
 }
 
-static struct thermal_zone_device_ops ops = {
+static int armada_get_temp_legacy(struct thermal_zone_device *thermal,
+				  int *temp)
+{
+	struct armada_thermal_priv *priv = thermal->devdata;
+	int ret;
+
+	/* Valid check */
+	if (armada_is_valid(priv)) {
+		dev_err(priv->dev,
+			"Temperature sensor reading not valid\n");
+		return -EIO;
+	}
+
+	/* Do the actual reading */
+	ret = armada_read_sensor(priv, temp);
+
+	return ret;
+}
+
+static struct thermal_zone_device_ops legacy_ops = {
+	.get_temp = armada_get_temp_legacy,
+};
+
+static int armada_get_temp(void *_sensor, int *temp)
+{
+	struct armada_thermal_sensor *sensor = _sensor;
+	struct armada_thermal_priv *priv = sensor->priv;
+	int ret;
+
+	mutex_lock(&priv->update_lock);
+
+	/* Select the desired channel */
+	ret = armada_select_channel(priv, sensor->id);
+	if (ret)
+		goto unlock_mutex;
+
+	/* Do the actual reading */
+	ret = armada_read_sensor(priv, temp);
+
+unlock_mutex:
+	mutex_unlock(&priv->update_lock);
+
+	return ret;
+}
+
+static struct thermal_zone_of_device_ops of_ops = {
 	.get_temp = armada_get_temp,
 };
 
 static const struct armada_thermal_data armadaxp_data = {
-	.init_sensor = armadaxp_init_sensor,
+	.init = armadaxp_init,
 	.temp_shift = 10,
 	.temp_mask = 0x1ff,
 	.coef_b = 3153000000ULL,
 	.coef_m = 10000000ULL,
 	.coef_div = 13825,
+	.syscon_status_off = 0xb0,
+	.syscon_control1_off = 0xd0,
 };
 
 static const struct armada_thermal_data armada370_data = {
-	.is_valid = armada_is_valid,
-	.init_sensor = armada370_init_sensor,
+	.init = armada370_init,
 	.is_valid_bit = BIT(9),
 	.temp_shift = 10,
 	.temp_mask = 0x1ff,
 	.coef_b = 3153000000ULL,
 	.coef_m = 10000000ULL,
 	.coef_div = 13825,
+	.syscon_status_off = 0x0,
+	.syscon_control1_off = 0x4,
 };
 
 static const struct armada_thermal_data armada375_data = {
-	.is_valid = armada_is_valid,
-	.init_sensor = armada375_init_sensor,
+	.init = armada375_init,
 	.is_valid_bit = BIT(10),
 	.temp_shift = 0,
 	.temp_mask = 0x1ff,
 	.coef_b = 3171900000ULL,
 	.coef_m = 10000000ULL,
 	.coef_div = 13616,
-	.needs_control0 = true,
+	.syscon_status_off = 0x78,
+	.syscon_control0_off = 0x7c,
+	.syscon_control1_off = 0x80,
 };
 
 static const struct armada_thermal_data armada380_data = {
-	.is_valid = armada_is_valid,
-	.init_sensor = armada380_init_sensor,
+	.init = armada380_init,
 	.is_valid_bit = BIT(10),
 	.temp_shift = 0,
 	.temp_mask = 0x3ff,
@@ -293,11 +444,13 @@ static const struct armada_thermal_data armada380_data = {
 	.coef_m = 2000096ULL,
 	.coef_div = 4201,
 	.inverted = true,
+	.syscon_control0_off = 0x70,
+	.syscon_control1_off = 0x74,
+	.syscon_status_off = 0x78,
 };
 
 static const struct armada_thermal_data armada_ap806_data = {
-	.is_valid = armada_is_valid,
-	.init_sensor = armada_ap806_init_sensor,
+	.init = armada_ap806_init,
 	.is_valid_bit = BIT(16),
 	.temp_shift = 0,
 	.temp_mask = 0x3ff,
@@ -306,12 +459,14 @@ static const struct armada_thermal_data armada_ap806_data = {
 	.coef_div = 1,
 	.inverted = true,
 	.signed_sample = true,
-	.needs_control0 = true,
+	.syscon_control0_off = 0x84,
+	.syscon_control1_off = 0x88,
+	.syscon_status_off = 0x8C,
+	.cpu_nr = 4,
 };
 
 static const struct armada_thermal_data armada_cp110_data = {
-	.is_valid = armada_is_valid,
-	.init_sensor = armada380_init_sensor,
+	.init = armada_cp110_init,
 	.is_valid_bit = BIT(10),
 	.temp_shift = 0,
 	.temp_mask = 0x3ff,
@@ -319,7 +474,9 @@ static const struct armada_thermal_data armada_cp110_data = {
 	.coef_m = 2000096ULL,
 	.coef_div = 4201,
 	.inverted = true,
-	.needs_control0 = true,
+	.syscon_control0_off = 0x70,
+	.syscon_control1_off = 0x74,
+	.syscon_status_off = 0x78,
 };
 
 static const struct of_device_id armada_thermal_id_table[] = {
@@ -353,13 +510,97 @@ static const struct of_device_id armada_thermal_id_table[] = {
 };
 MODULE_DEVICE_TABLE(of, armada_thermal_id_table);
 
+static const struct regmap_config armada_thermal_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.fast_io = true,
+};
+
+static int armada_thermal_probe_legacy(struct platform_device *pdev,
+				       struct armada_thermal_priv *priv)
+{
+	struct armada_thermal_data *data = priv->data;
+	struct resource *res;
+	void __iomem *base;
+
+	/* First memory region points towards the status register */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (IS_ERR(res))
+		return PTR_ERR(res);
+
+	/*
+	 * Edit the resource start address and length to map over all the
+	 * registers, instead of pointing at them one by one.
+	 */
+	res->start -= data->syscon_status_off;
+	res->end = res->start + max(data->syscon_status_off,
+				    max(data->syscon_control0_off,
+					data->syscon_control1_off)) +
+		   sizeof(unsigned int) - 1;
+
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	priv->syscon = devm_regmap_init_mmio(&pdev->dev, base,
+					     &armada_thermal_regmap_config);
+	if (IS_ERR(priv->syscon))
+		return PTR_ERR(priv->syscon);
+
+	return 0;
+}
+
+static int armada_thermal_probe_syscon(struct platform_device *pdev,
+				       struct armada_thermal_priv *priv)
+{
+	priv->syscon = syscon_node_to_regmap(pdev->dev.parent->of_node);
+	if (IS_ERR(priv->syscon))
+		return PTR_ERR(priv->syscon);
+
+	return 0;
+}
+
+static void armada_set_sane_name(struct platform_device *pdev,
+				 struct armada_thermal_priv *priv)
+{
+	const char *name = dev_name(&pdev->dev);
+	char *insane_char;
+
+	if (strlen(name) > THERMAL_NAME_LENGTH) {
+		/*
+		 * When inside a system controller, the device name has the
+		 * form: f06f8000.system-controller:ap-thermal so stripping
+		 * after the ':' should give us a shorter but meaningful name.
+		 */
+		name = strrchr(name, ':');
+		if (!name)
+			name = "armada_thermal";
+		else
+			name++;
+	}
+
+	/* Save the name locally */
+	strncpy(priv->zone_name, name, THERMAL_NAME_LENGTH - 1);
+	priv->zone_name[THERMAL_NAME_LENGTH - 1] = '\0';
+
+	/* Then check there are no '-' or hwmon core will complain */
+	do {
+		insane_char = strpbrk(priv->zone_name, "-");
+		if (insane_char)
+			*insane_char = '_';
+	} while (insane_char);
+}
+
 static int armada_thermal_probe(struct platform_device *pdev)
 {
-	void __iomem *control = NULL;
-	struct thermal_zone_device *thermal;
+	struct thermal_zone_device *tz;
+	struct armada_thermal_sensor *sensor;
+	struct armada_drvdata *drvdata;
 	const struct of_device_id *match;
 	struct armada_thermal_priv *priv;
-	struct resource *res;
+	int sensor_id;
+	int ret;
 
 	match = of_match_device(armada_thermal_id_table, &pdev->dev);
 	if (!match)
@@ -369,58 +610,99 @@ static int armada_thermal_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->status = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(priv->status))
-		return PTR_ERR(priv->status);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	control = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(control))
-		return PTR_ERR(control);
+	drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
 
+	priv->dev = &pdev->dev;
 	priv->data = (struct armada_thermal_data *)match->data;
 
+	mutex_init(&priv->update_lock);
+
 	/*
 	 * Legacy DT bindings only described "control1" register (also referred
-	 * as "control MSB" on old documentation). New bindings cover
+	 * as "control MSB" on old documentation). Then, bindings moved to cover
 	 * "control0/control LSB" and "control1/control MSB" registers within
-	 * the same resource, which is then of size 8 instead of 4.
+	 * the same resource, which was then of size 8 instead of 4.
+	 *
+	 * The logic of defining sporadic registers is broken. For instance, it
+	 * blocked the addition of the overheat interrupt feature that needed
+	 * another resource somewhere else in the same memory area. One solution
+	 * is to define an overall system controller and put the thermal node
+	 * into it, which requires the use of regmaps across all the driver.
 	 */
-	if (resource_size(res) == LEGACY_CONTROL_MEM_LEN) {
-		/* ->control0 unavailable in this configuration */
-		if (priv->data->needs_control0) {
-			dev_err(&pdev->dev, "No access to control0 register\n");
-			return -EINVAL;
+	if (IS_ERR(syscon_node_to_regmap(pdev->dev.parent->of_node))) {
+		/* Ensure device name is correct for the thermal core */
+		armada_set_sane_name(pdev, priv);
+
+		ret = armada_thermal_probe_legacy(pdev, priv);
+		if (ret)
+			return ret;
+
+		priv->data->init(pdev, priv);
+
+		/* Wait the sensors to be valid */
+		armada_wait_sensor_validity(priv);
+
+		tz = thermal_zone_device_register(priv->zone_name, 0, 0, priv,
+						  &legacy_ops, NULL, 0, 0);
+		if (IS_ERR(tz)) {
+			dev_err(&pdev->dev,
+				"Failed to register thermal zone device\n");
+			return PTR_ERR(tz);
 		}
 
-		priv->control1 = control + LEGACY_CONTROL1_OFFSET;
-	} else {
-		priv->control0 = control + CONTROL0_OFFSET;
-		priv->control1 = control + CONTROL1_OFFSET;
+		drvdata->type = LEGACY;
+		drvdata->data.tz = tz;
+		platform_set_drvdata(pdev, drvdata);
+
+		return 0;
 	}
 
-	priv->data->init_sensor(pdev, priv);
+	ret = armada_thermal_probe_syscon(pdev, priv);
+	if (ret)
+		return ret;
 
-	thermal = thermal_zone_device_register(dev_name(&pdev->dev), 0, 0, priv,
-					       &ops, NULL, 0, 0);
-	if (IS_ERR(thermal)) {
-		dev_err(&pdev->dev,
-			"Failed to register thermal zone device\n");
-		return PTR_ERR(thermal);
-	}
+	priv->current_channel = -1;
+	priv->data->init(pdev, priv);
+	drvdata->type = SYSCON;
+	drvdata->data.priv = priv;
+	platform_set_drvdata(pdev, drvdata);
 
-	platform_set_drvdata(pdev, thermal);
+	/*
+	 * There is one channel for the IC and one per CPU (if any), each
+	 * channel has one sensor.
+	 */
+	for (sensor_id = 0; sensor_id <= priv->data->cpu_nr; sensor_id++) {
+		sensor = devm_kzalloc(&pdev->dev,
+				      sizeof(struct armada_thermal_sensor),
+				      GFP_KERNEL);
+		if (!sensor)
+			return -ENOMEM;
+
+		/* Register the sensor */
+		sensor->priv = priv;
+		sensor->id = sensor_id;
+		tz = devm_thermal_zone_of_sensor_register(&pdev->dev,
+							  sensor->id, sensor,
+							  &of_ops);
+		if (IS_ERR(tz)) {
+			dev_info(&pdev->dev, "Thermal sensor %d unavailable\n",
+				 sensor_id);
+			devm_kfree(&pdev->dev, sensor);
+			continue;
+		}
+	}
 
 	return 0;
 }
 
 static int armada_thermal_exit(struct platform_device *pdev)
 {
-	struct thermal_zone_device *armada_thermal =
-		platform_get_drvdata(pdev);
+	struct armada_drvdata *drvdata = platform_get_drvdata(pdev);
 
-	thermal_zone_device_unregister(armada_thermal);
+	if (drvdata->type == LEGACY)
+		thermal_zone_device_unregister(drvdata->data.tz);
 
 	return 0;
 }

drivers/thermal/imx_thermal.c

@@ -605,7 +605,10 @@ static int imx_init_from_nvmem_cells(struct platform_device *pdev)
 	ret = nvmem_cell_read_u32(&pdev->dev, "calib", &val);
 	if (ret)
 		return ret;
-	imx_init_calib(pdev, val);
+
+	ret = imx_init_calib(pdev, val);
+	if (ret)
+		return ret;
 
 	ret = nvmem_cell_read_u32(&pdev->dev, "temp_grade", &val);
 	if (ret)

drivers/thermal/qcom/Makefile

 obj-$(CONFIG_QCOM_TSENS)	+= qcom_tsens.o
-qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
+qcom_tsens-y			+= tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o

drivers/thermal/qcom/tsens-common.c

@@ -16,6 +16,7 @@
 #include <linux/io.h>
 #include <linux/nvmem-consumer.h>
 #include <linux/of_address.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include "tsens.h"
@@ -103,11 +104,11 @@ int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
 {
 	struct tsens_sensor *s = &tmdev->sensor[id];
 	u32 code;
-	unsigned int sensor_addr;
+	unsigned int status_reg;
 	int last_temp = 0, ret;
 
-	sensor_addr = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET;
-	ret = regmap_read(tmdev->map, sensor_addr, &code);
+	status_reg = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET;
+	ret = regmap_read(tmdev->map, status_reg, &code);
 	if (ret)
 		return ret;
 	last_temp = code & SN_ST_TEMP_MASK;
@@ -126,16 +127,28 @@ static const struct regmap_config tsens_config = {
 int __init init_common(struct tsens_device *tmdev)
 {
 	void __iomem *base;
+	struct resource *res;
+	struct platform_device *op = of_find_device_by_node(tmdev->dev->of_node);
 
-	base = of_iomap(tmdev->dev->of_node, 0);
-	if (!base)
+	if (!op)
 		return -EINVAL;
 
+	/* The driver only uses the TM register address space for now */
+	if (op->num_resources > 1) {
+		tmdev->tm_offset = 0;
+	} else {
+		/* old DTs where SROT and TM were in a contiguous 2K block */
+		tmdev->tm_offset = 0x1000;
+	}
+
+	res = platform_get_resource(op, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(&op->dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
 	tmdev->map = devm_regmap_init_mmio(tmdev->dev, base, &tsens_config);
-	if (IS_ERR(tmdev->map)) {
-		iounmap(base);
+	if (IS_ERR(tmdev->map))
 		return PTR_ERR(tmdev->map);
-	}
 
 	return 0;
 }

drivers/thermal/qcom/tsens-8996.c → drivers/thermal/qcom/tsens-v2.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Copyright (c) 2015, The Linux Foundation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
+ * Copyright (c) 2018, Linaro Limited
  */
 
-#include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/bitops.h>
 #include "tsens.h"
 
-#define STATUS_OFFSET	0x10a0
-#define LAST_TEMP_MASK	0xfff
+#define STATUS_OFFSET		0xa0
+#define LAST_TEMP_MASK		0xfff
 #define STATUS_VALID_BIT	BIT(21)
-#define CODE_SIGN_BIT		BIT(11)
 
-static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
+static int get_temp_tsens_v2(struct tsens_device *tmdev, int id, int *temp)
 {
 	struct tsens_sensor *s = &tmdev->sensor[id];
 	u32 code;
-	unsigned int sensor_addr;
-	int last_temp = 0, last_temp2 = 0, last_temp3 = 0, ret;
+	unsigned int status_reg;
+	u32 last_temp = 0, last_temp2 = 0, last_temp3 = 0;
+	int ret;
 
-	sensor_addr = STATUS_OFFSET + s->hw_id * 4;
-	ret = regmap_read(tmdev->map, sensor_addr, &code);
+	status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * 4;
+	ret = regmap_read(tmdev->map, status_reg, &code);
 	if (ret)
 		return ret;
 	last_temp = code & LAST_TEMP_MASK;
@@ -37,7 +29,7 @@ static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
 		goto done;
 
 	/* Try a second time */
-	ret = regmap_read(tmdev->map, sensor_addr, &code);
+	ret = regmap_read(tmdev->map, status_reg, &code);
 	if (ret)
 		return ret;
 	if (code & STATUS_VALID_BIT) {
@@ -48,7 +40,7 @@ static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
 	}
 
 	/* Try a third/last time */
-	ret = regmap_read(tmdev->map, sensor_addr, &code);
+	ret = regmap_read(tmdev->map, status_reg, &code);
 	if (ret)
 		return ret;
 	if (code & STATUS_VALID_BIT) {
@@ -63,22 +55,23 @@ static int get_temp_8996(struct tsens_device *tmdev, int id, int *temp)
 	else if (last_temp2 == last_temp3)
 		last_temp = last_temp3;
 done:
-	/* Code sign bit is the sign extension for a negative value */
-	if (last_temp & CODE_SIGN_BIT)
-		last_temp |= ~CODE_SIGN_BIT;
-
-	/* Temperatures are in deciCelicius */
-	*temp = last_temp * 100;
+	/* Convert temperature from deciCelsius to milliCelsius */
+	*temp = sign_extend32(last_temp, fls(LAST_TEMP_MASK) - 1) * 100;
 
 	return 0;
 }
 
-static const struct tsens_ops ops_8996 = {
+static const struct tsens_ops ops_generic_v2 = {
 	.init		= init_common,
-	.get_temp	= get_temp_8996,
+	.get_temp	= get_temp_tsens_v2,
+};
+
+const struct tsens_data data_tsens_v2 = {
+	.ops            = &ops_generic_v2,
 };
 
+/* Kept around for backward compatibility with old msm8996.dtsi */
 const struct tsens_data data_8996 = {
 	.num_sensors	= 13,
-	.ops		= &ops_8996,
+	.ops		= &ops_generic_v2,
 };

drivers/thermal/qcom/tsens.c

@@ -72,6 +72,9 @@ static const struct of_device_id tsens_table[] = {
 	}, {
 		.compatible = "qcom,msm8996-tsens",
 		.data = &data_8996,
+	}, {
+		.compatible = "qcom,tsens-v2",
+		.data = &data_tsens_v2,
 	},
 	{}
 };

drivers/thermal/qcom/tsens.h

@@ -77,9 +77,8 @@ struct tsens_device {
 	struct device			*dev;
 	u32				num_sensors;
 	struct regmap			*map;
-	struct regmap_field		*status_field;
+	u32				tm_offset;
 	struct tsens_context		ctx;
-	bool				trdy;
 	const struct tsens_ops		*ops;
 	struct tsens_sensor		sensor[0];
 };
@@ -89,6 +88,9 @@ void compute_intercept_slope(struct tsens_device *, u32 *, u32 *, u32);
 int init_common(struct tsens_device *);
 int get_temp_common(struct tsens_device *, int, int *);
 
-extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
+/* TSENS v1 targets */
+extern const struct tsens_data data_8916, data_8974, data_8960;
+/* TSENS v2 targets */
+extern const struct tsens_data data_8996, data_tsens_v2;
 
 #endif /* __QCOM_TSENS_H__ */

drivers/thermal/rcar_thermal.c

@@ -598,7 +598,7 @@ static int rcar_thermal_probe(struct platform_device *pdev)
 			enr_bits |= 3 << (i * 8);
 	}
 
-	if (enr_bits)
+	if (common->base && enr_bits)
 		rcar_thermal_common_write(common, ENR, enr_bits);
 
 	dev_info(dev, "%d sensor probed\n", i);

drivers/thermal/samsung/exynos_tmu.c

@@ -789,11 +789,6 @@ static void exynos_tmu_work(struct work_struct *work)
 	struct exynos_tmu_data *data = container_of(work,
 			struct exynos_tmu_data, irq_work);
 
-	if (!IS_ERR(data->clk_sec))
-		clk_enable(data->clk_sec);
-	if (!IS_ERR(data->clk_sec))
-		clk_disable(data->clk_sec);
-
 	thermal_zone_device_update(data->tzd, THERMAL_EVENT_UNSPECIFIED);
 
 	mutex_lock(&data->lock);

drivers/thermal/thermal_hwmon.c

@@ -142,7 +142,8 @@ int thermal_add_hwmon_sysfs(struct thermal_zone_device *tz)
 
 	INIT_LIST_HEAD(&hwmon->tz_list);
 	strlcpy(hwmon->type, tz->type, THERMAL_NAME_LENGTH);
-	hwmon->device = hwmon_device_register_with_info(NULL, hwmon->type,
+	strreplace(hwmon->type, '-', '_');
+	hwmon->device = hwmon_device_register_with_info(&tz->device, hwmon->type,
 							hwmon, NULL, NULL);
 	if (IS_ERR(hwmon->device)) {
 		result = PTR_ERR(hwmon->device);

drivers/thermal/ti-soc-thermal/dra752-bandgap.h

@@ -54,56 +54,36 @@
 #define DRA752_STD_FUSE_OPP_BGAP_CORE_OFFSET		0x8
 #define DRA752_TEMP_SENSOR_CORE_OFFSET			0x154
 #define DRA752_BANDGAP_THRESHOLD_CORE_OFFSET		0x1ac
-#define DRA752_BANDGAP_CUMUL_DTEMP_CORE_OFFSET		0x1c4
-#define DRA752_DTEMP_CORE_0_OFFSET			0x208
 #define DRA752_DTEMP_CORE_1_OFFSET			0x20c
 #define DRA752_DTEMP_CORE_2_OFFSET			0x210
-#define DRA752_DTEMP_CORE_3_OFFSET			0x214
-#define DRA752_DTEMP_CORE_4_OFFSET			0x218
 
 /* DRA752.iva register offsets */
 #define DRA752_STD_FUSE_OPP_BGAP_IVA_OFFSET		0x388
 #define DRA752_TEMP_SENSOR_IVA_OFFSET			0x398
 #define DRA752_BANDGAP_THRESHOLD_IVA_OFFSET		0x3a4
-#define DRA752_BANDGAP_CUMUL_DTEMP_IVA_OFFSET		0x3b4
-#define DRA752_DTEMP_IVA_0_OFFSET			0x3d0
 #define DRA752_DTEMP_IVA_1_OFFSET			0x3d4
 #define DRA752_DTEMP_IVA_2_OFFSET			0x3d8
-#define DRA752_DTEMP_IVA_3_OFFSET			0x3dc
-#define DRA752_DTEMP_IVA_4_OFFSET			0x3e0
 
 /* DRA752.mpu register offsets */
 #define DRA752_STD_FUSE_OPP_BGAP_MPU_OFFSET		0x4
 #define DRA752_TEMP_SENSOR_MPU_OFFSET			0x14c
 #define DRA752_BANDGAP_THRESHOLD_MPU_OFFSET		0x1a4
-#define DRA752_BANDGAP_CUMUL_DTEMP_MPU_OFFSET		0x1bc
-#define DRA752_DTEMP_MPU_0_OFFSET			0x1e0
 #define DRA752_DTEMP_MPU_1_OFFSET			0x1e4
 #define DRA752_DTEMP_MPU_2_OFFSET			0x1e8
-#define DRA752_DTEMP_MPU_3_OFFSET			0x1ec
-#define DRA752_DTEMP_MPU_4_OFFSET			0x1f0
 
 /* DRA752.dspeve register offsets */
 #define DRA752_STD_FUSE_OPP_BGAP_DSPEVE_OFFSET			0x384
 #define DRA752_TEMP_SENSOR_DSPEVE_OFFSET			0x394
 #define DRA752_BANDGAP_THRESHOLD_DSPEVE_OFFSET			0x3a0
-#define DRA752_BANDGAP_CUMUL_DTEMP_DSPEVE_OFFSET		0x3b0
-#define DRA752_DTEMP_DSPEVE_0_OFFSET				0x3bc
 #define DRA752_DTEMP_DSPEVE_1_OFFSET				0x3c0
 #define DRA752_DTEMP_DSPEVE_2_OFFSET				0x3c4
-#define DRA752_DTEMP_DSPEVE_3_OFFSET				0x3c8
-#define DRA752_DTEMP_DSPEVE_4_OFFSET				0x3cc
 
 /* DRA752.gpu register offsets */
 #define DRA752_STD_FUSE_OPP_BGAP_GPU_OFFSET		0x0
 #define DRA752_TEMP_SENSOR_GPU_OFFSET			0x150
 #define DRA752_BANDGAP_THRESHOLD_GPU_OFFSET		0x1a8
-#define DRA752_BANDGAP_CUMUL_DTEMP_GPU_OFFSET		0x1c0
-#define DRA752_DTEMP_GPU_0_OFFSET			0x1f4
 #define DRA752_DTEMP_GPU_1_OFFSET			0x1f8
 #define DRA752_DTEMP_GPU_2_OFFSET			0x1fc
-#define DRA752_DTEMP_GPU_3_OFFSET			0x200
-#define DRA752_DTEMP_GPU_4_OFFSET			0x204
 
 /**
  * Register bitfields for DRA752
@@ -114,7 +94,6 @@
  */
 
 /* DRA752.BANDGAP_STATUS_1 */
-#define DRA752_BANDGAP_STATUS_1_ALERT_MASK		BIT(31)
 #define DRA752_BANDGAP_STATUS_1_HOT_CORE_MASK		BIT(5)
 #define DRA752_BANDGAP_STATUS_1_COLD_CORE_MASK		BIT(4)
 #define DRA752_BANDGAP_STATUS_1_HOT_GPU_MASK		BIT(3)
@@ -125,10 +104,6 @@
 /* DRA752.BANDGAP_CTRL_2 */
 #define DRA752_BANDGAP_CTRL_2_FREEZE_IVA_MASK			BIT(22)
 #define DRA752_BANDGAP_CTRL_2_FREEZE_DSPEVE_MASK		BIT(21)
-#define DRA752_BANDGAP_CTRL_2_CLEAR_IVA_MASK			BIT(19)
-#define DRA752_BANDGAP_CTRL_2_CLEAR_DSPEVE_MASK			BIT(18)
-#define DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_IVA_MASK		BIT(16)
-#define DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_DSPEVE_MASK		BIT(15)
 #define DRA752_BANDGAP_CTRL_2_MASK_HOT_IVA_MASK			BIT(3)
 #define DRA752_BANDGAP_CTRL_2_MASK_COLD_IVA_MASK		BIT(2)
 #define DRA752_BANDGAP_CTRL_2_MASK_HOT_DSPEVE_MASK		BIT(1)
@@ -141,17 +116,10 @@
 #define DRA752_BANDGAP_STATUS_2_COLD_DSPEVE_MASK		BIT(0)
 
 /* DRA752.BANDGAP_CTRL_1 */
-#define DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK			(0x3 << 30)
 #define DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK		(0x7 << 27)
 #define DRA752_BANDGAP_CTRL_1_FREEZE_CORE_MASK			BIT(23)
 #define DRA752_BANDGAP_CTRL_1_FREEZE_GPU_MASK			BIT(22)
 #define DRA752_BANDGAP_CTRL_1_FREEZE_MPU_MASK			BIT(21)
-#define DRA752_BANDGAP_CTRL_1_CLEAR_CORE_MASK			BIT(20)
-#define DRA752_BANDGAP_CTRL_1_CLEAR_GPU_MASK			BIT(19)
-#define DRA752_BANDGAP_CTRL_1_CLEAR_MPU_MASK			BIT(18)
-#define DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_CORE_MASK		BIT(17)
-#define DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_GPU_MASK		BIT(16)
-#define DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_MPU_MASK		BIT(15)
 #define DRA752_BANDGAP_CTRL_1_MASK_HOT_CORE_MASK		BIT(5)
 #define DRA752_BANDGAP_CTRL_1_MASK_COLD_CORE_MASK		BIT(4)
 #define DRA752_BANDGAP_CTRL_1_MASK_HOT_GPU_MASK			BIT(3)
@@ -168,22 +136,6 @@
 #define DRA752_BANDGAP_THRESHOLD_HOT_MASK		(0x3ff << 16)
 #define DRA752_BANDGAP_THRESHOLD_COLD_MASK		(0x3ff << 0)
 
-
-/* DRA752.BANDGAP_CUMUL_DTEMP_CORE */
-#define DRA752_BANDGAP_CUMUL_DTEMP_CORE_MASK		(0xffffffff << 0)
-
-/* DRA752.BANDGAP_CUMUL_DTEMP_IVA */
-#define DRA752_BANDGAP_CUMUL_DTEMP_IVA_MASK		(0xffffffff << 0)
-
-/* DRA752.BANDGAP_CUMUL_DTEMP_MPU */
-#define DRA752_BANDGAP_CUMUL_DTEMP_MPU_MASK		(0xffffffff << 0)
-
-/* DRA752.BANDGAP_CUMUL_DTEMP_DSPEVE */
-#define DRA752_BANDGAP_CUMUL_DTEMP_DSPEVE_MASK		(0xffffffff << 0)
-
-/* DRA752.BANDGAP_CUMUL_DTEMP_GPU */
-#define DRA752_BANDGAP_CUMUL_DTEMP_GPU_MASK		(0xffffffff << 0)
-
 /**
  * Temperature limits and thresholds for DRA752
  *
@@ -202,10 +154,6 @@
 /* bandgap clock limits */
 #define DRA752_GPU_MAX_FREQ				1500000
 #define DRA752_GPU_MIN_FREQ				1000000
-/* sensor limits */
-#define DRA752_GPU_MIN_TEMP				-40000
-#define DRA752_GPU_MAX_TEMP				125000
-#define DRA752_GPU_HYST_VAL				5000
 /* interrupts thresholds */
 #define DRA752_GPU_T_HOT				800
 #define DRA752_GPU_T_COLD				795
@@ -214,10 +162,6 @@
 /* bandgap clock limits */
 #define DRA752_MPU_MAX_FREQ				1500000
 #define DRA752_MPU_MIN_FREQ				1000000
-/* sensor limits */
-#define DRA752_MPU_MIN_TEMP				-40000
-#define DRA752_MPU_MAX_TEMP				125000
-#define DRA752_MPU_HYST_VAL				5000
 /* interrupts thresholds */
 #define DRA752_MPU_T_HOT				800
 #define DRA752_MPU_T_COLD				795
@@ -226,10 +170,6 @@
 /* bandgap clock limits */
 #define DRA752_CORE_MAX_FREQ				1500000
 #define DRA752_CORE_MIN_FREQ				1000000
-/* sensor limits */
-#define DRA752_CORE_MIN_TEMP				-40000
-#define DRA752_CORE_MAX_TEMP				125000
-#define DRA752_CORE_HYST_VAL				5000
 /* interrupts thresholds */
 #define DRA752_CORE_T_HOT				800
 #define DRA752_CORE_T_COLD				795
@@ -238,10 +178,6 @@
 /* bandgap clock limits */
 #define DRA752_DSPEVE_MAX_FREQ				1500000
 #define DRA752_DSPEVE_MIN_FREQ				1000000
-/* sensor limits */
-#define DRA752_DSPEVE_MIN_TEMP				-40000
-#define DRA752_DSPEVE_MAX_TEMP				125000
-#define DRA752_DSPEVE_HYST_VAL				5000
 /* interrupts thresholds */
 #define DRA752_DSPEVE_T_HOT				800
 #define DRA752_DSPEVE_T_COLD				795
@@ -250,10 +186,6 @@
 /* bandgap clock limits */
 #define DRA752_IVA_MAX_FREQ				1500000
 #define DRA752_IVA_MIN_FREQ				1000000
-/* sensor limits */
-#define DRA752_IVA_MIN_TEMP				-40000
-#define DRA752_IVA_MAX_TEMP				125000
-#define DRA752_IVA_HYST_VAL				5000
 /* interrupts thresholds */
 #define DRA752_IVA_T_HOT				800
 #define DRA752_IVA_T_COLD				795

drivers/thermal/ti-soc-thermal/dra752-thermal-data.c

@@ -41,24 +41,16 @@ dra752_core_temp_sensor_registers = {
 	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET,
 	.mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_CORE_MASK,
 	.mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_CORE_MASK,
-	.mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_CORE_MASK,
-	.mask_clear_mask = DRA752_BANDGAP_CTRL_1_CLEAR_CORE_MASK,
-	.mask_clear_accum_mask = DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_CORE_MASK,
 	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_CORE_OFFSET,
 	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
 	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
 	.bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET,
-	.status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK,
 	.status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_CORE_MASK,
 	.status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_CORE_MASK,
-	.bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_CORE_OFFSET,
-	.ctrl_dtemp_0 = DRA752_DTEMP_CORE_0_OFFSET,
 	.ctrl_dtemp_1 = DRA752_DTEMP_CORE_1_OFFSET,
 	.ctrl_dtemp_2 = DRA752_DTEMP_CORE_2_OFFSET,
-	.ctrl_dtemp_3 = DRA752_DTEMP_CORE_3_OFFSET,
-	.ctrl_dtemp_4 = DRA752_DTEMP_CORE_4_OFFSET,
 	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_CORE_OFFSET,
 };
 
@@ -74,24 +66,16 @@ dra752_iva_temp_sensor_registers = {
 	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_2_OFFSET,
 	.mask_hot_mask = DRA752_BANDGAP_CTRL_2_MASK_HOT_IVA_MASK,
 	.mask_cold_mask = DRA752_BANDGAP_CTRL_2_MASK_COLD_IVA_MASK,
-	.mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = DRA752_BANDGAP_CTRL_2_FREEZE_IVA_MASK,
-	.mask_clear_mask = DRA752_BANDGAP_CTRL_2_CLEAR_IVA_MASK,
-	.mask_clear_accum_mask = DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_IVA_MASK,
 	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_IVA_OFFSET,
 	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
 	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
 	.bgap_status = DRA752_BANDGAP_STATUS_2_OFFSET,
-	.status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK,
 	.status_hot_mask = DRA752_BANDGAP_STATUS_2_HOT_IVA_MASK,
 	.status_cold_mask = DRA752_BANDGAP_STATUS_2_COLD_IVA_MASK,
-	.bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_IVA_OFFSET,
-	.ctrl_dtemp_0 = DRA752_DTEMP_IVA_0_OFFSET,
 	.ctrl_dtemp_1 = DRA752_DTEMP_IVA_1_OFFSET,
 	.ctrl_dtemp_2 = DRA752_DTEMP_IVA_2_OFFSET,
-	.ctrl_dtemp_3 = DRA752_DTEMP_IVA_3_OFFSET,
-	.ctrl_dtemp_4 = DRA752_DTEMP_IVA_4_OFFSET,
 	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_IVA_OFFSET,
 };
 
@@ -107,24 +91,16 @@ dra752_mpu_temp_sensor_registers = {
 	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET,
 	.mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_MPU_MASK,
 	.mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_MPU_MASK,
-	.mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_MPU_MASK,
-	.mask_clear_mask = DRA752_BANDGAP_CTRL_1_CLEAR_MPU_MASK,
-	.mask_clear_accum_mask = DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_MPU_MASK,
 	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_MPU_OFFSET,
 	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
 	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
 	.bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET,
-	.status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK,
 	.status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_MPU_MASK,
 	.status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_MPU_MASK,
-	.bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_MPU_OFFSET,
-	.ctrl_dtemp_0 = DRA752_DTEMP_MPU_0_OFFSET,
 	.ctrl_dtemp_1 = DRA752_DTEMP_MPU_1_OFFSET,
 	.ctrl_dtemp_2 = DRA752_DTEMP_MPU_2_OFFSET,
-	.ctrl_dtemp_3 = DRA752_DTEMP_MPU_3_OFFSET,
-	.ctrl_dtemp_4 = DRA752_DTEMP_MPU_4_OFFSET,
 	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_MPU_OFFSET,
 };
 
@@ -140,24 +116,16 @@ dra752_dspeve_temp_sensor_registers = {
 	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_2_OFFSET,
 	.mask_hot_mask = DRA752_BANDGAP_CTRL_2_MASK_HOT_DSPEVE_MASK,
 	.mask_cold_mask = DRA752_BANDGAP_CTRL_2_MASK_COLD_DSPEVE_MASK,
-	.mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = DRA752_BANDGAP_CTRL_2_FREEZE_DSPEVE_MASK,
-	.mask_clear_mask = DRA752_BANDGAP_CTRL_2_CLEAR_DSPEVE_MASK,
-	.mask_clear_accum_mask = DRA752_BANDGAP_CTRL_2_CLEAR_ACCUM_DSPEVE_MASK,
 	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_DSPEVE_OFFSET,
 	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
 	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
 	.bgap_status = DRA752_BANDGAP_STATUS_2_OFFSET,
-	.status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK,
 	.status_hot_mask = DRA752_BANDGAP_STATUS_2_HOT_DSPEVE_MASK,
 	.status_cold_mask = DRA752_BANDGAP_STATUS_2_COLD_DSPEVE_MASK,
-	.bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_DSPEVE_OFFSET,
-	.ctrl_dtemp_0 = DRA752_DTEMP_DSPEVE_0_OFFSET,
 	.ctrl_dtemp_1 = DRA752_DTEMP_DSPEVE_1_OFFSET,
 	.ctrl_dtemp_2 = DRA752_DTEMP_DSPEVE_2_OFFSET,
-	.ctrl_dtemp_3 = DRA752_DTEMP_DSPEVE_3_OFFSET,
-	.ctrl_dtemp_4 = DRA752_DTEMP_DSPEVE_4_OFFSET,
 	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_DSPEVE_OFFSET,
 };
 
@@ -173,24 +141,16 @@ dra752_gpu_temp_sensor_registers = {
 	.bgap_mask_ctrl = DRA752_BANDGAP_CTRL_1_OFFSET,
 	.mask_hot_mask = DRA752_BANDGAP_CTRL_1_MASK_HOT_GPU_MASK,
 	.mask_cold_mask = DRA752_BANDGAP_CTRL_1_MASK_COLD_GPU_MASK,
-	.mask_sidlemode_mask = DRA752_BANDGAP_CTRL_1_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = DRA752_BANDGAP_CTRL_1_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = DRA752_BANDGAP_CTRL_1_FREEZE_GPU_MASK,
-	.mask_clear_mask = DRA752_BANDGAP_CTRL_1_CLEAR_GPU_MASK,
-	.mask_clear_accum_mask = DRA752_BANDGAP_CTRL_1_CLEAR_ACCUM_GPU_MASK,
 	.bgap_threshold = DRA752_BANDGAP_THRESHOLD_GPU_OFFSET,
 	.threshold_thot_mask = DRA752_BANDGAP_THRESHOLD_HOT_MASK,
 	.threshold_tcold_mask = DRA752_BANDGAP_THRESHOLD_COLD_MASK,
 	.bgap_status = DRA752_BANDGAP_STATUS_1_OFFSET,
-	.status_bgap_alert_mask = DRA752_BANDGAP_STATUS_1_ALERT_MASK,
 	.status_hot_mask = DRA752_BANDGAP_STATUS_1_HOT_GPU_MASK,
 	.status_cold_mask = DRA752_BANDGAP_STATUS_1_COLD_GPU_MASK,
-	.bgap_cumul_dtemp = DRA752_BANDGAP_CUMUL_DTEMP_GPU_OFFSET,
-	.ctrl_dtemp_0 = DRA752_DTEMP_GPU_0_OFFSET,
 	.ctrl_dtemp_1 = DRA752_DTEMP_GPU_1_OFFSET,
 	.ctrl_dtemp_2 = DRA752_DTEMP_GPU_2_OFFSET,
-	.ctrl_dtemp_3 = DRA752_DTEMP_GPU_3_OFFSET,
-	.ctrl_dtemp_4 = DRA752_DTEMP_GPU_4_OFFSET,
 	.bgap_efuse = DRA752_STD_FUSE_OPP_BGAP_GPU_OFFSET,
 };
 
@@ -200,11 +160,6 @@ static struct temp_sensor_data dra752_mpu_temp_sensor_data = {
 	.t_cold = DRA752_MPU_T_COLD,
 	.min_freq = DRA752_MPU_MIN_FREQ,
 	.max_freq = DRA752_MPU_MAX_FREQ,
-	.max_temp = DRA752_MPU_MAX_TEMP,
-	.min_temp = DRA752_MPU_MIN_TEMP,
-	.hyst_val = DRA752_MPU_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /* Thresholds and limits for DRA752 GPU temperature sensor */
@@ -213,11 +168,6 @@ static struct temp_sensor_data dra752_gpu_temp_sensor_data = {
 	.t_cold = DRA752_GPU_T_COLD,
 	.min_freq = DRA752_GPU_MIN_FREQ,
 	.max_freq = DRA752_GPU_MAX_FREQ,
-	.max_temp = DRA752_GPU_MAX_TEMP,
-	.min_temp = DRA752_GPU_MIN_TEMP,
-	.hyst_val = DRA752_GPU_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /* Thresholds and limits for DRA752 CORE temperature sensor */
@@ -226,11 +176,6 @@ static struct temp_sensor_data dra752_core_temp_sensor_data = {
 	.t_cold = DRA752_CORE_T_COLD,
 	.min_freq = DRA752_CORE_MIN_FREQ,
 	.max_freq = DRA752_CORE_MAX_FREQ,
-	.max_temp = DRA752_CORE_MAX_TEMP,
-	.min_temp = DRA752_CORE_MIN_TEMP,
-	.hyst_val = DRA752_CORE_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /* Thresholds and limits for DRA752 DSPEVE temperature sensor */
@@ -239,11 +184,6 @@ static struct temp_sensor_data dra752_dspeve_temp_sensor_data = {
 	.t_cold = DRA752_DSPEVE_T_COLD,
 	.min_freq = DRA752_DSPEVE_MIN_FREQ,
 	.max_freq = DRA752_DSPEVE_MAX_FREQ,
-	.max_temp = DRA752_DSPEVE_MAX_TEMP,
-	.min_temp = DRA752_DSPEVE_MIN_TEMP,
-	.hyst_val = DRA752_DSPEVE_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /* Thresholds and limits for DRA752 IVA temperature sensor */
@@ -252,11 +192,6 @@ static struct temp_sensor_data dra752_iva_temp_sensor_data = {
 	.t_cold = DRA752_IVA_T_COLD,
 	.min_freq = DRA752_IVA_MIN_FREQ,
 	.max_freq = DRA752_IVA_MAX_FREQ,
-	.max_temp = DRA752_IVA_MAX_TEMP,
-	.min_temp = DRA752_IVA_MIN_TEMP,
-	.hyst_val = DRA752_IVA_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /*

drivers/thermal/ti-soc-thermal/omap3-thermal-data.c

@@ -48,9 +48,6 @@ omap34xx_mpu_temp_sensor_registers = {
 static struct temp_sensor_data omap34xx_mpu_temp_sensor_data = {
 	.min_freq = 32768,
 	.max_freq = 32768,
-	.max_temp = 125000,
-	.min_temp = -40000,
-	.hyst_val = 5000,
 };
 
 /*
@@ -119,9 +116,6 @@ omap36xx_mpu_temp_sensor_registers = {
 static struct temp_sensor_data omap36xx_mpu_temp_sensor_data = {
 	.min_freq = 32768,
 	.max_freq = 32768,
-	.max_temp = 125000,
-	.min_temp = -40000,
-	.hyst_val = 5000,
 };
 
 /*

drivers/thermal/ti-soc-thermal/omap4-thermal-data.c

@@ -42,9 +42,6 @@ omap4430_mpu_temp_sensor_registers = {
 static struct temp_sensor_data omap4430_mpu_temp_sensor_data = {
 	.min_freq = OMAP4430_MIN_FREQ,
 	.max_freq = OMAP4430_MAX_FREQ,
-	.max_temp = OMAP4430_MAX_TEMP,
-	.min_temp = OMAP4430_MIN_TEMP,
-	.hyst_val = OMAP4430_HYST_VAL,
 };
 
 /*
@@ -121,8 +118,6 @@ omap4460_mpu_temp_sensor_registers = {
 	.tshut_cold_mask = OMAP4460_TSHUT_COLD_MASK,
 
 	.bgap_status = OMAP4460_BGAP_STATUS_OFFSET,
-	.status_clean_stop_mask = OMAP4460_CLEAN_STOP_MASK,
-	.status_bgap_alert_mask = OMAP4460_BGAP_ALERT_MASK,
 	.status_hot_mask = OMAP4460_HOT_FLAG_MASK,
 	.status_cold_mask = OMAP4460_COLD_FLAG_MASK,
 
@@ -137,11 +132,6 @@ static struct temp_sensor_data omap4460_mpu_temp_sensor_data = {
 	.t_cold = OMAP4460_T_COLD,
 	.min_freq = OMAP4460_MIN_FREQ,
 	.max_freq = OMAP4460_MAX_FREQ,
-	.max_temp = OMAP4460_MAX_TEMP,
-	.min_temp = OMAP4460_MIN_TEMP,
-	.hyst_val = OMAP4460_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /*

drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h

@@ -73,10 +73,6 @@
 /* bandgap clock limits (no control on 4430) */
 #define OMAP4430_MAX_FREQ				32768
 #define OMAP4430_MIN_FREQ				32768
-/* sensor limits */
-#define OMAP4430_MIN_TEMP				-40000
-#define OMAP4430_MAX_TEMP				125000
-#define OMAP4430_HYST_VAL				5000
 
 /**
  * *** OMAP4460 *** Applicable for OMAP4470
@@ -143,8 +139,6 @@
 #define OMAP4460_TSHUT_COLD_MASK			(0x3ff << 0)
 
 /* OMAP4460.BANDGAP_STATUS bits */
-#define OMAP4460_CLEAN_STOP_MASK			BIT(3)
-#define OMAP4460_BGAP_ALERT_MASK			BIT(2)
 #define OMAP4460_HOT_FLAG_MASK				BIT(1)
 #define OMAP4460_COLD_FLAG_MASK				BIT(0)
 
@@ -162,10 +156,6 @@
 /* bandgap clock limits */
 #define OMAP4460_MAX_FREQ				1500000
 #define OMAP4460_MIN_FREQ				1000000
-/* sensor limits */
-#define OMAP4460_MIN_TEMP				-40000
-#define OMAP4460_MAX_TEMP				123000
-#define OMAP4460_HYST_VAL				5000
 /* interrupts thresholds */
 #define OMAP4460_TSHUT_HOT				900	/* 122 deg C */
 #define OMAP4460_TSHUT_COLD				895	/* 100 deg C */

drivers/thermal/ti-soc-thermal/omap5-thermal-data.c

@@ -38,12 +38,8 @@ omap5430_mpu_temp_sensor_registers = {
 	.bgap_mask_ctrl = OMAP5430_BGAP_CTRL_OFFSET,
 	.mask_hot_mask = OMAP5430_MASK_HOT_MPU_MASK,
 	.mask_cold_mask = OMAP5430_MASK_COLD_MPU_MASK,
-	.mask_sidlemode_mask = OMAP5430_MASK_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = OMAP5430_MASK_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = OMAP5430_MASK_FREEZE_MPU_MASK,
-	.mask_clear_mask = OMAP5430_MASK_CLEAR_MPU_MASK,
-	.mask_clear_accum_mask = OMAP5430_MASK_CLEAR_ACCUM_MPU_MASK,
-
 
 	.bgap_counter = OMAP5430_BGAP_CTRL_OFFSET,
 	.counter_mask = OMAP5430_COUNTER_MASK,
@@ -57,17 +53,11 @@ omap5430_mpu_temp_sensor_registers = {
 	.tshut_cold_mask = OMAP5430_TSHUT_COLD_MASK,
 
 	.bgap_status = OMAP5430_BGAP_STATUS_OFFSET,
-	.status_clean_stop_mask = 0x0,
-	.status_bgap_alert_mask = OMAP5430_BGAP_ALERT_MASK,
 	.status_hot_mask = OMAP5430_HOT_MPU_FLAG_MASK,
 	.status_cold_mask = OMAP5430_COLD_MPU_FLAG_MASK,
 
-	.bgap_cumul_dtemp = OMAP5430_BGAP_CUMUL_DTEMP_MPU_OFFSET,
-	.ctrl_dtemp_0 = OMAP5430_BGAP_DTEMP_MPU_0_OFFSET,
 	.ctrl_dtemp_1 = OMAP5430_BGAP_DTEMP_MPU_1_OFFSET,
 	.ctrl_dtemp_2 = OMAP5430_BGAP_DTEMP_MPU_2_OFFSET,
-	.ctrl_dtemp_3 = OMAP5430_BGAP_DTEMP_MPU_3_OFFSET,
-	.ctrl_dtemp_4 = OMAP5430_BGAP_DTEMP_MPU_4_OFFSET,
 	.bgap_efuse = OMAP5430_FUSE_OPP_BGAP_MPU,
 };
 
@@ -84,11 +74,8 @@ omap5430_gpu_temp_sensor_registers = {
 	.bgap_mask_ctrl = OMAP5430_BGAP_CTRL_OFFSET,
 	.mask_hot_mask = OMAP5430_MASK_HOT_GPU_MASK,
 	.mask_cold_mask = OMAP5430_MASK_COLD_GPU_MASK,
-	.mask_sidlemode_mask = OMAP5430_MASK_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = OMAP5430_MASK_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = OMAP5430_MASK_FREEZE_GPU_MASK,
-	.mask_clear_mask = OMAP5430_MASK_CLEAR_GPU_MASK,
-	.mask_clear_accum_mask = OMAP5430_MASK_CLEAR_ACCUM_GPU_MASK,
 
 	.bgap_counter = OMAP5430_BGAP_CTRL_OFFSET,
 	.counter_mask = OMAP5430_COUNTER_MASK,
@@ -102,17 +89,11 @@ omap5430_gpu_temp_sensor_registers = {
 	.tshut_cold_mask = OMAP5430_TSHUT_COLD_MASK,
 
 	.bgap_status = OMAP5430_BGAP_STATUS_OFFSET,
-	.status_clean_stop_mask = 0x0,
-	.status_bgap_alert_mask = OMAP5430_BGAP_ALERT_MASK,
 	.status_hot_mask = OMAP5430_HOT_GPU_FLAG_MASK,
 	.status_cold_mask = OMAP5430_COLD_GPU_FLAG_MASK,
 
-	.bgap_cumul_dtemp = OMAP5430_BGAP_CUMUL_DTEMP_GPU_OFFSET,
-	.ctrl_dtemp_0 = OMAP5430_BGAP_DTEMP_GPU_0_OFFSET,
 	.ctrl_dtemp_1 = OMAP5430_BGAP_DTEMP_GPU_1_OFFSET,
 	.ctrl_dtemp_2 = OMAP5430_BGAP_DTEMP_GPU_2_OFFSET,
-	.ctrl_dtemp_3 = OMAP5430_BGAP_DTEMP_GPU_3_OFFSET,
-	.ctrl_dtemp_4 = OMAP5430_BGAP_DTEMP_GPU_4_OFFSET,
 
 	.bgap_efuse = OMAP5430_FUSE_OPP_BGAP_GPU,
 };
@@ -130,11 +111,8 @@ omap5430_core_temp_sensor_registers = {
 	.bgap_mask_ctrl = OMAP5430_BGAP_CTRL_OFFSET,
 	.mask_hot_mask = OMAP5430_MASK_HOT_CORE_MASK,
 	.mask_cold_mask = OMAP5430_MASK_COLD_CORE_MASK,
-	.mask_sidlemode_mask = OMAP5430_MASK_SIDLEMODE_MASK,
 	.mask_counter_delay_mask = OMAP5430_MASK_COUNTER_DELAY_MASK,
 	.mask_freeze_mask = OMAP5430_MASK_FREEZE_CORE_MASK,
-	.mask_clear_mask = OMAP5430_MASK_CLEAR_CORE_MASK,
-	.mask_clear_accum_mask = OMAP5430_MASK_CLEAR_ACCUM_CORE_MASK,
 
 	.bgap_counter = OMAP5430_BGAP_CTRL_OFFSET,
 	.counter_mask = OMAP5430_COUNTER_MASK,
@@ -148,17 +126,11 @@ omap5430_core_temp_sensor_registers = {
 	.tshut_cold_mask = OMAP5430_TSHUT_COLD_MASK,
 
 	.bgap_status = OMAP5430_BGAP_STATUS_OFFSET,
-	.status_clean_stop_mask = 0x0,
-	.status_bgap_alert_mask = OMAP5430_BGAP_ALERT_MASK,
 	.status_hot_mask = OMAP5430_HOT_CORE_FLAG_MASK,
 	.status_cold_mask = OMAP5430_COLD_CORE_FLAG_MASK,
 
-	.bgap_cumul_dtemp = OMAP5430_BGAP_CUMUL_DTEMP_CORE_OFFSET,
-	.ctrl_dtemp_0 = OMAP5430_BGAP_DTEMP_CORE_0_OFFSET,
 	.ctrl_dtemp_1 = OMAP5430_BGAP_DTEMP_CORE_1_OFFSET,
 	.ctrl_dtemp_2 = OMAP5430_BGAP_DTEMP_CORE_2_OFFSET,
-	.ctrl_dtemp_3 = OMAP5430_BGAP_DTEMP_CORE_3_OFFSET,
-	.ctrl_dtemp_4 = OMAP5430_BGAP_DTEMP_CORE_4_OFFSET,
 
 	.bgap_efuse = OMAP5430_FUSE_OPP_BGAP_CORE,
 };
@@ -171,11 +143,6 @@ static struct temp_sensor_data omap5430_mpu_temp_sensor_data = {
 	.t_cold = OMAP5430_MPU_T_COLD,
 	.min_freq = OMAP5430_MPU_MIN_FREQ,
 	.max_freq = OMAP5430_MPU_MAX_FREQ,
-	.max_temp = OMAP5430_MPU_MAX_TEMP,
-	.min_temp = OMAP5430_MPU_MIN_TEMP,
-	.hyst_val = OMAP5430_MPU_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /* Thresholds and limits for OMAP5430 GPU temperature sensor */
@@ -186,11 +153,6 @@ static struct temp_sensor_data omap5430_gpu_temp_sensor_data = {
 	.t_cold = OMAP5430_GPU_T_COLD,
 	.min_freq = OMAP5430_GPU_MIN_FREQ,
 	.max_freq = OMAP5430_GPU_MAX_FREQ,
-	.max_temp = OMAP5430_GPU_MAX_TEMP,
-	.min_temp = OMAP5430_GPU_MIN_TEMP,
-	.hyst_val = OMAP5430_GPU_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /* Thresholds and limits for OMAP5430 CORE temperature sensor */
@@ -201,11 +163,6 @@ static struct temp_sensor_data omap5430_core_temp_sensor_data = {
 	.t_cold = OMAP5430_CORE_T_COLD,
 	.min_freq = OMAP5430_CORE_MIN_FREQ,
 	.max_freq = OMAP5430_CORE_MAX_FREQ,
-	.max_temp = OMAP5430_CORE_MAX_TEMP,
-	.min_temp = OMAP5430_CORE_MIN_TEMP,
-	.hyst_val = OMAP5430_CORE_HYST_VAL,
-	.update_int1 = 1000,
-	.update_int2 = 2000,
 };
 
 /*
@@ -319,8 +276,7 @@ const struct ti_bandgap_data omap5430_data = {
 			TI_BANDGAP_FEATURE_FREEZE_BIT |
 			TI_BANDGAP_FEATURE_TALERT |
 			TI_BANDGAP_FEATURE_COUNTER_DELAY |
-			TI_BANDGAP_FEATURE_HISTORY_BUFFER |
-			TI_BANDGAP_FEATURE_ERRATA_813,
+			TI_BANDGAP_FEATURE_HISTORY_BUFFER,
 	.fclock_name = "l3instr_ts_gclk_div",
 	.div_ck_name = "l3instr_ts_gclk_div",
 	.conv_table = omap5430_adc_to_temp,

drivers/thermal/ti-soc-thermal/omap5xxx-bandgap.h

@@ -44,36 +44,24 @@
 #define OMAP5430_TEMP_SENSOR_GPU_OFFSET			0x150
 #define OMAP5430_BGAP_THRESHOLD_GPU_OFFSET		0x1A8
 #define OMAP5430_BGAP_TSHUT_GPU_OFFSET			0x1B4
-#define OMAP5430_BGAP_CUMUL_DTEMP_GPU_OFFSET		0x1C0
-#define OMAP5430_BGAP_DTEMP_GPU_0_OFFSET		0x1F4
 #define OMAP5430_BGAP_DTEMP_GPU_1_OFFSET		0x1F8
 #define OMAP5430_BGAP_DTEMP_GPU_2_OFFSET		0x1FC
-#define OMAP5430_BGAP_DTEMP_GPU_3_OFFSET		0x200
-#define OMAP5430_BGAP_DTEMP_GPU_4_OFFSET		0x204
 
 /* OMAP5430.MPU register offsets */
 #define OMAP5430_FUSE_OPP_BGAP_MPU			0x4
 #define OMAP5430_TEMP_SENSOR_MPU_OFFSET			0x14C
 #define OMAP5430_BGAP_THRESHOLD_MPU_OFFSET		0x1A4
 #define OMAP5430_BGAP_TSHUT_MPU_OFFSET			0x1B0
-#define OMAP5430_BGAP_CUMUL_DTEMP_MPU_OFFSET		0x1BC
-#define OMAP5430_BGAP_DTEMP_MPU_0_OFFSET		0x1E0
 #define OMAP5430_BGAP_DTEMP_MPU_1_OFFSET		0x1E4
 #define OMAP5430_BGAP_DTEMP_MPU_2_OFFSET		0x1E8
-#define OMAP5430_BGAP_DTEMP_MPU_3_OFFSET		0x1EC
-#define OMAP5430_BGAP_DTEMP_MPU_4_OFFSET		0x1F0
 
 /* OMAP5430.MPU register offsets */
 #define OMAP5430_FUSE_OPP_BGAP_CORE			0x8
 #define OMAP5430_TEMP_SENSOR_CORE_OFFSET		0x154
 #define OMAP5430_BGAP_THRESHOLD_CORE_OFFSET		0x1AC
 #define OMAP5430_BGAP_TSHUT_CORE_OFFSET			0x1B8
-#define OMAP5430_BGAP_CUMUL_DTEMP_CORE_OFFSET		0x1C4
-#define OMAP5430_BGAP_DTEMP_CORE_0_OFFSET		0x208
 #define OMAP5430_BGAP_DTEMP_CORE_1_OFFSET		0x20C
 #define OMAP5430_BGAP_DTEMP_CORE_2_OFFSET		0x210
-#define OMAP5430_BGAP_DTEMP_CORE_3_OFFSET		0x214
-#define OMAP5430_BGAP_DTEMP_CORE_4_OFFSET		0x218
 
 /* OMAP5430.common register offsets */
 #define OMAP5430_BGAP_CTRL_OFFSET			0x1A0
@@ -94,17 +82,10 @@
 #define OMAP5430_BGAP_TEMP_SENSOR_DTEMP_MASK		(0x3ff << 0)
 
 /* OMAP5430.BANDGAP_CTRL */
-#define OMAP5430_MASK_SIDLEMODE_MASK			(0x3 << 30)
 #define OMAP5430_MASK_COUNTER_DELAY_MASK		(0x7 << 27)
 #define OMAP5430_MASK_FREEZE_CORE_MASK			BIT(23)
 #define OMAP5430_MASK_FREEZE_GPU_MASK			BIT(22)
 #define OMAP5430_MASK_FREEZE_MPU_MASK			BIT(21)
-#define OMAP5430_MASK_CLEAR_CORE_MASK			BIT(20)
-#define OMAP5430_MASK_CLEAR_GPU_MASK			BIT(19)
-#define OMAP5430_MASK_CLEAR_MPU_MASK			BIT(18)
-#define OMAP5430_MASK_CLEAR_ACCUM_CORE_MASK		BIT(17)
-#define OMAP5430_MASK_CLEAR_ACCUM_GPU_MASK		BIT(16)
-#define OMAP5430_MASK_CLEAR_ACCUM_MPU_MASK		BIT(15)
 #define OMAP5430_MASK_HOT_CORE_MASK			BIT(5)
 #define OMAP5430_MASK_COLD_CORE_MASK			BIT(4)
 #define OMAP5430_MASK_HOT_GPU_MASK			BIT(3)
@@ -123,17 +104,7 @@
 #define OMAP5430_TSHUT_HOT_MASK				(0x3ff << 16)
 #define OMAP5430_TSHUT_COLD_MASK			(0x3ff << 0)
 
-/* OMAP5430.BANDGAP_CUMUL_DTEMP_MPU */
-#define OMAP5430_CUMUL_DTEMP_MPU_MASK			(0xffffffff << 0)
-
-/* OMAP5430.BANDGAP_CUMUL_DTEMP_GPU */
-#define OMAP5430_CUMUL_DTEMP_GPU_MASK			(0xffffffff << 0)
-
-/* OMAP5430.BANDGAP_CUMUL_DTEMP_CORE */
-#define OMAP5430_CUMUL_DTEMP_CORE_MASK			(0xffffffff << 0)
-
 /* OMAP5430.BANDGAP_STATUS */
-#define OMAP5430_BGAP_ALERT_MASK			BIT(31)
 #define OMAP5430_HOT_CORE_FLAG_MASK			BIT(5)
 #define OMAP5430_COLD_CORE_FLAG_MASK			BIT(4)
 #define OMAP5430_HOT_GPU_FLAG_MASK			BIT(3)
@@ -159,10 +130,6 @@
 /* bandgap clock limits */
 #define OMAP5430_GPU_MAX_FREQ				1500000
 #define OMAP5430_GPU_MIN_FREQ				1000000
-/* sensor limits */
-#define OMAP5430_GPU_MIN_TEMP				-40000
-#define OMAP5430_GPU_MAX_TEMP				125000
-#define OMAP5430_GPU_HYST_VAL				5000
 /* interrupts thresholds */
 #define OMAP5430_GPU_TSHUT_HOT				915
 #define OMAP5430_GPU_TSHUT_COLD				900
@@ -173,10 +140,6 @@
 /* bandgap clock limits */
 #define OMAP5430_MPU_MAX_FREQ				1500000
 #define OMAP5430_MPU_MIN_FREQ				1000000
-/* sensor limits */
-#define OMAP5430_MPU_MIN_TEMP				-40000
-#define OMAP5430_MPU_MAX_TEMP				125000
-#define OMAP5430_MPU_HYST_VAL				5000
 /* interrupts thresholds */
 #define OMAP5430_MPU_TSHUT_HOT				915
 #define OMAP5430_MPU_TSHUT_COLD				900
@@ -187,10 +150,6 @@
 /* bandgap clock limits */
 #define OMAP5430_CORE_MAX_FREQ				1500000
 #define OMAP5430_CORE_MIN_FREQ				1000000
-/* sensor limits */
-#define OMAP5430_CORE_MIN_TEMP				-40000
-#define OMAP5430_CORE_MAX_TEMP				125000
-#define OMAP5430_CORE_HYST_VAL				5000
 /* interrupts thresholds */
 #define OMAP5430_CORE_TSHUT_HOT				915
 #define OMAP5430_CORE_TSHUT_COLD			900

drivers/thermal/ti-soc-thermal/ti-bandgap.c

@@ -305,217 +305,6 @@ int ti_bandgap_adc_to_mcelsius(struct ti_bandgap *bgp, int adc_val, int *t)
 	return 0;
 }
 
-/**
- * ti_bandgap_mcelsius_to_adc() - converts a mCelsius value to ADC scale
- * @bgp: struct ti_bandgap pointer
- * @temp: value in mCelsius
- * @adc: address where to write the resulting temperature in ADC representation
- *
- * Simple conversion from mCelsius to ADC values. In case the temp value
- * is out of the ADC conv table range, it returns -ERANGE, 0 on success.
- * The conversion table is indexed by the ADC values.
- *
- * Return: 0 if conversion was successful, else -ERANGE in case the @temp
- * argument is out of the ADC conv table range.
- */
-static
-int ti_bandgap_mcelsius_to_adc(struct ti_bandgap *bgp, long temp, int *adc)
-{
-	const struct ti_bandgap_data *conf = bgp->conf;
-	const int *conv_table = bgp->conf->conv_table;
-	int high, low, mid;
-
-	low = 0;
-	high = conf->adc_end_val - conf->adc_start_val;
-	mid = (high + low) / 2;
-
-	if (temp < conv_table[low] || temp > conv_table[high])
-		return -ERANGE;
-
-	while (low < high) {
-		if (temp < conv_table[mid])
-			high = mid - 1;
-		else
-			low = mid + 1;
-		mid = (low + high) / 2;
-	}
-
-	*adc = conf->adc_start_val + low;
-	return 0;
-}
-
-/**
- * ti_bandgap_add_hyst() - add hysteresis (in mCelsius) to an ADC value
- * @bgp: struct ti_bandgap pointer
- * @adc_val: temperature value in ADC representation
- * @hyst_val: hysteresis value in mCelsius
- * @sum: address where to write the resulting temperature (in ADC scale)
- *
- * Adds an hysteresis value (in mCelsius) to a ADC temperature value.
- *
- * Return: 0 on success, -ERANGE otherwise.
- */
-static
-int ti_bandgap_add_hyst(struct ti_bandgap *bgp, int adc_val, int hyst_val,
-			u32 *sum)
-{
-	int temp, ret;
-
-	/*
-	 * Need to add in the mcelsius domain, so we have a temperature
-	 * the conv_table range
-	 */
-	ret = ti_bandgap_adc_to_mcelsius(bgp, adc_val, &temp);
-	if (ret < 0)
-		return ret;
-
-	temp += hyst_val;
-
-	ret = ti_bandgap_mcelsius_to_adc(bgp, temp, sum);
-	return ret;
-}
-
-/***   Helper functions handling device Alert/Shutdown signals   ***/
-
-/**
- * ti_bandgap_unmask_interrupts() - unmasks the events of thot & tcold
- * @bgp: struct ti_bandgap pointer
- * @id: bandgap sensor id
- * @t_hot: hot temperature value to trigger alert signal
- * @t_cold: cold temperature value to trigger alert signal
- *
- * Checks the requested t_hot and t_cold values and configures the IRQ event
- * masks accordingly. Call this function only if bandgap features HAS(TALERT).
- */
-static void ti_bandgap_unmask_interrupts(struct ti_bandgap *bgp, int id,
-					 u32 t_hot, u32 t_cold)
-{
-	struct temp_sensor_registers *tsr;
-	u32 temp, reg_val;
-
-	/* Read the current on die temperature */
-	temp = ti_bandgap_read_temp(bgp, id);
-
-	tsr = bgp->conf->sensors[id].registers;
-	reg_val = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
-
-	if (temp < t_hot)
-		reg_val |= tsr->mask_hot_mask;
-	else
-		reg_val &= ~tsr->mask_hot_mask;
-
-	if (t_cold < temp)
-		reg_val |= tsr->mask_cold_mask;
-	else
-		reg_val &= ~tsr->mask_cold_mask;
-	ti_bandgap_writel(bgp, reg_val, tsr->bgap_mask_ctrl);
-}
-
-/**
- * ti_bandgap_update_alert_threshold() - sequence to update thresholds
- * @bgp: struct ti_bandgap pointer
- * @id: bandgap sensor id
- * @val: value (ADC) of a new threshold
- * @hot: desired threshold to be updated. true if threshold hot, false if
- *       threshold cold
- *
- * It will program the required thresholds (hot and cold) for TALERT signal.
- * This function can be used to update t_hot or t_cold, depending on @hot value.
- * It checks the resulting t_hot and t_cold values, based on the new passed @val
- * and configures the thresholds so that t_hot is always greater than t_cold.
- * Call this function only if bandgap features HAS(TALERT).
- *
- * Return: 0 if no error, else corresponding error
- */
-static int ti_bandgap_update_alert_threshold(struct ti_bandgap *bgp, int id,
-					     int val, bool hot)
-{
-	struct temp_sensor_data *ts_data = bgp->conf->sensors[id].ts_data;
-	struct temp_sensor_registers *tsr;
-	u32 thresh_val, reg_val, t_hot, t_cold, ctrl;
-	int err = 0;
-
-	tsr = bgp->conf->sensors[id].registers;
-
-	/* obtain the current value */
-	thresh_val = ti_bandgap_readl(bgp, tsr->bgap_threshold);
-	t_cold = (thresh_val & tsr->threshold_tcold_mask) >>
-		__ffs(tsr->threshold_tcold_mask);
-	t_hot = (thresh_val & tsr->threshold_thot_mask) >>
-		__ffs(tsr->threshold_thot_mask);
-	if (hot)
-		t_hot = val;
-	else
-		t_cold = val;
-
-	if (t_cold > t_hot) {
-		if (hot)
-			err = ti_bandgap_add_hyst(bgp, t_hot,
-						  -ts_data->hyst_val,
-						  &t_cold);
-		else
-			err = ti_bandgap_add_hyst(bgp, t_cold,
-						  ts_data->hyst_val,
-						  &t_hot);
-	}
-
-	/* write the new threshold values */
-	reg_val = thresh_val &
-		  ~(tsr->threshold_thot_mask | tsr->threshold_tcold_mask);
-	reg_val |= (t_hot << __ffs(tsr->threshold_thot_mask)) |
-		   (t_cold << __ffs(tsr->threshold_tcold_mask));
-
-	/**
-	 * Errata i813:
-	 * Spurious Thermal Alert: Talert can happen randomly while the device
-	 * remains under the temperature limit defined for this event to trig.
-	 * This spurious event is caused by a incorrect re-synchronization
-	 * between clock domains. The comparison between configured threshold
-	 * and current temperature value can happen while the value is
-	 * transitioning (metastable), thus causing inappropriate event
-	 * generation. No spurious event occurs as long as the threshold value
-	 * stays unchanged. Spurious event can be generated while a thermal
-	 * alert threshold is modified in
-	 * CONTROL_BANDGAP_THRESHOLD_MPU/GPU/CORE/DSPEVE/IVA_n.
-	 */
-
-	if (TI_BANDGAP_HAS(bgp, ERRATA_813)) {
-		/* Mask t_hot and t_cold events at the IP Level */
-		ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
-
-		if (hot)
-			ctrl &= ~tsr->mask_hot_mask;
-		else
-			ctrl &= ~tsr->mask_cold_mask;
-
-		ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
-	}
-
-	/* Write the threshold value */
-	ti_bandgap_writel(bgp, reg_val, tsr->bgap_threshold);
-
-	if (TI_BANDGAP_HAS(bgp, ERRATA_813)) {
-		/* Unmask t_hot and t_cold events at the IP Level */
-		ctrl = ti_bandgap_readl(bgp, tsr->bgap_mask_ctrl);
-		if (hot)
-			ctrl |= tsr->mask_hot_mask;
-		else
-			ctrl |= tsr->mask_cold_mask;
-
-		ti_bandgap_writel(bgp, ctrl, tsr->bgap_mask_ctrl);
-	}
-
-	if (err) {
-		dev_err(bgp->dev, "failed to reprogram thot threshold\n");
-		err = -EIO;
-		goto exit;
-	}
-
-	ti_bandgap_unmask_interrupts(bgp, id, t_hot, t_cold);
-exit:
-	return err;
-}
-
 /**
  * ti_bandgap_validate() - helper to check the sanity of a struct ti_bandgap
  * @bgp: struct ti_bandgap pointer
@@ -543,165 +332,6 @@ static inline int ti_bandgap_validate(struct ti_bandgap *bgp, int id)
 	return 0;
 }
 
-/**
- * _ti_bandgap_write_threshold() - helper to update TALERT t_cold or t_hot
- * @bgp: struct ti_bandgap pointer
- * @id: bandgap sensor id
- * @val: value (mCelsius) of a new threshold
- * @hot: desired threshold to be updated. true if threshold hot, false if
- *       threshold cold
- *
- * It will update the required thresholds (hot and cold) for TALERT signal.
- * This function can be used to update t_hot or t_cold, depending on @hot value.
- * Validates the mCelsius range and update the requested threshold.
- * Call this function only if bandgap features HAS(TALERT).
- *
- * Return: 0 if no error, else corresponding error value.
- */
-static int _ti_bandgap_write_threshold(struct ti_bandgap *bgp, int id, int val,
-				       bool hot)
-{
-	struct temp_sensor_data *ts_data;
-	struct temp_sensor_registers *tsr;
-	u32 adc_val;
-	int ret;
-
-	ret = ti_bandgap_validate(bgp, id);
-	if (ret)
-		return ret;
-
-	if (!TI_BANDGAP_HAS(bgp, TALERT))
-		return -ENOTSUPP;
-
-	ts_data = bgp->conf->sensors[id].ts_data;
-	tsr = bgp->conf->sensors[id].registers;
-	if (hot) {
-		if (val < ts_data->min_temp + ts_data->hyst_val)
-			ret = -EINVAL;
-	} else {
-		if (val > ts_data->max_temp + ts_data->hyst_val)
-			ret = -EINVAL;
-	}
-
-	if (ret)
-		return ret;
-
-	ret = ti_bandgap_mcelsius_to_adc(bgp, val, &adc_val);
-	if (ret < 0)
-		return ret;
-
-	spin_lock(&bgp->lock);
-	ret = ti_bandgap_update_alert_threshold(bgp, id, adc_val, hot);
-	spin_unlock(&bgp->lock);
-	return ret;
-}
-
-/**
- * _ti_bandgap_read_threshold() - helper to read TALERT t_cold or t_hot
- * @bgp: struct ti_bandgap pointer
- * @id: bandgap sensor id
- * @val: value (mCelsius) of a threshold
- * @hot: desired threshold to be read. true if threshold hot, false if
- *       threshold cold
- *
- * It will fetch the required thresholds (hot and cold) for TALERT signal.
- * This function can be used to read t_hot or t_cold, depending on @hot value.
- * Call this function only if bandgap features HAS(TALERT).
- *
- * Return: 0 if no error, -ENOTSUPP if it has no TALERT support, or the
- * corresponding error value if some operation fails.
- */
-static int _ti_bandgap_read_threshold(struct ti_bandgap *bgp, int id,
-				      int *val, bool hot)
-{
-	struct temp_sensor_registers *tsr;
-	u32 temp, mask;
-	int ret = 0;
-
-	ret = ti_bandgap_validate(bgp, id);
-	if (ret)
-		goto exit;
-
-	if (!TI_BANDGAP_HAS(bgp, TALERT)) {
-		ret = -ENOTSUPP;
-		goto exit;
-	}
-
-	tsr = bgp->conf->sensors[id].registers;
-	if (hot)
-		mask = tsr->threshold_thot_mask;
-	else
-		mask = tsr->threshold_tcold_mask;
-
-	temp = ti_bandgap_readl(bgp, tsr->bgap_threshold);
-	temp = (temp & mask) >> __ffs(mask);
-	ret = ti_bandgap_adc_to_mcelsius(bgp, temp, &temp);
-	if (ret) {
-		dev_err(bgp->dev, "failed to read thot\n");
-		ret = -EIO;
-		goto exit;
-	}
-
-	*val = temp;
-
-exit:
-	return ret;
-}
-
-/***   Exposed APIs   ***/
-
-/**
- * ti_bandgap_read_thot() - reads sensor current thot
- * @bgp: pointer to bandgap instance
- * @id: sensor id
- * @thot: resulting current thot value
- *
- * Return: 0 on success or the proper error code
- */
-int ti_bandgap_read_thot(struct ti_bandgap *bgp, int id, int *thot)
-{
-	return _ti_bandgap_read_threshold(bgp, id, thot, true);
-}
-
-/**
- * ti_bandgap_write_thot() - sets sensor current thot
- * @bgp: pointer to bandgap instance
- * @id: sensor id
- * @val: desired thot value
- *
- * Return: 0 on success or the proper error code
- */
-int ti_bandgap_write_thot(struct ti_bandgap *bgp, int id, int val)
-{
-	return _ti_bandgap_write_threshold(bgp, id, val, true);
-}
-
-/**
- * ti_bandgap_read_tcold() - reads sensor current tcold
- * @bgp: pointer to bandgap instance
- * @id: sensor id
- * @tcold: resulting current tcold value
- *
- * Return: 0 on success or the proper error code
- */
-int ti_bandgap_read_tcold(struct ti_bandgap *bgp, int id, int *tcold)
-{
-	return _ti_bandgap_read_threshold(bgp, id, tcold, false);
-}
-
-/**
- * ti_bandgap_write_tcold() - sets the sensor tcold
- * @bgp: pointer to bandgap instance
- * @id: sensor id
- * @val: desired tcold value
- *
- * Return: 0 on success or the proper error code
- */
-int ti_bandgap_write_tcold(struct ti_bandgap *bgp, int id, int val)
-{
-	return _ti_bandgap_write_threshold(bgp, id, val, false);
-}
-
 /**
  * ti_bandgap_read_counter() - read the sensor counter
  * @bgp: pointer to bandgap instance

drivers/thermal/ti-soc-thermal/ti-bandgap.h

@@ -78,11 +78,8 @@
  * @bgap_mask_ctrl: BANDGAP_MASK_CTRL register offset
  * @mask_hot_mask: mask to bandgap_mask_ctrl.mask_hot
  * @mask_cold_mask: mask to bandgap_mask_ctrl.mask_cold
- * @mask_sidlemode_mask: mask to bandgap_mask_ctrl.mask_sidlemode
  * @mask_counter_delay_mask: mask to bandgap_mask_ctrl.mask_counter_delay
  * @mask_freeze_mask: mask to bandgap_mask_ctrl.mask_free
- * @mask_clear_mask: mask to bandgap_mask_ctrl.mask_clear
- * @mask_clear_accum_mask: mask to bandgap_mask_ctrl.mask_clear_accum
  * @bgap_mode_ctrl: BANDGAP_MODE_CTRL register offset
  * @mode_ctrl_mask: mask to bandgap_mode_ctrl.mode_ctrl
  * @bgap_counter: BANDGAP_COUNTER register offset
@@ -91,21 +88,13 @@
  * @threshold_thot_mask: mask to bandgap_threhold.thot
  * @threshold_tcold_mask: mask to bandgap_threhold.tcold
  * @tshut_threshold: TSHUT_THRESHOLD register offset (TSHUT thresholds)
- * @tshut_efuse_mask: mask to tshut_threshold.tshut_efuse
- * @tshut_efuse_shift: shift to tshut_threshold.tshut_efuse
  * @tshut_hot_mask: mask to tshut_threhold.thot
  * @tshut_cold_mask: mask to tshut_threhold.thot
  * @bgap_status: BANDGAP_STATUS register offset
- * @status_clean_stop_mask: mask to bandgap_status.clean_stop
- * @status_bgap_alert_mask: mask to bandgap_status.bandgap_alert
  * @status_hot_mask: mask to bandgap_status.hot
  * @status_cold_mask: mask to bandgap_status.cold
- * @bgap_cumul_dtemp: BANDGAP_CUMUL_DTEMP register offset
- * @ctrl_dtemp_0: CTRL_DTEMP0 register offset
  * @ctrl_dtemp_1: CTRL_DTEMP1 register offset
  * @ctrl_dtemp_2: CTRL_DTEMP2 register offset
- * @ctrl_dtemp_3: CTRL_DTEMP3 register offset
- * @ctrl_dtemp_4: CTRL_DTEMP4 register offset
  * @bgap_efuse: BANDGAP_EFUSE register offset
  *
  * The register offsets and bitfields might change across
@@ -121,17 +110,14 @@ struct temp_sensor_registers {
 	u32	temp_sensor_ctrl;
 	u32	bgap_tempsoff_mask;
 	u32	bgap_soc_mask;
-	u32	bgap_eocz_mask; /* not used: but needs revisit */
+	u32	bgap_eocz_mask;
 	u32	bgap_dtemp_mask;
 
 	u32	bgap_mask_ctrl;
 	u32	mask_hot_mask;
 	u32	mask_cold_mask;
-	u32	mask_sidlemode_mask; /* not used: but may be needed for pm */
 	u32	mask_counter_delay_mask;
 	u32	mask_freeze_mask;
-	u32	mask_clear_mask; /* not used: but needed for trending */
-	u32	mask_clear_accum_mask; /* not used: but needed for trending */
 
 	u32	bgap_mode_ctrl;
 	u32	mode_ctrl_mask;
@@ -144,23 +130,15 @@ struct temp_sensor_registers {
 	u32	threshold_tcold_mask;
 
 	u32	tshut_threshold;
-	u32	tshut_efuse_mask; /* not used */
-	u32	tshut_efuse_shift; /* not used */
 	u32	tshut_hot_mask;
 	u32	tshut_cold_mask;
 
 	u32	bgap_status;
-	u32	status_clean_stop_mask; /* not used: but needed for trending */
-	u32	status_bgap_alert_mask; /* not used */
 	u32	status_hot_mask;
 	u32	status_cold_mask;
 
-	u32	bgap_cumul_dtemp; /* not used: but needed for trending */
-	u32	ctrl_dtemp_0; /* not used: but needed for trending */
-	u32	ctrl_dtemp_1; /* not used: but needed for trending */
-	u32	ctrl_dtemp_2; /* not used: but needed for trending */
-	u32	ctrl_dtemp_3; /* not used: but needed for trending */
-	u32	ctrl_dtemp_4; /* not used: but needed for trending */
+	u32	ctrl_dtemp_1;
+	u32	ctrl_dtemp_2;
 	u32	bgap_efuse;
 };
 
@@ -172,11 +150,6 @@ struct temp_sensor_registers {
  * @t_cold: temperature to trigger a thermal alert (low initial value)
  * @min_freq: sensor minimum clock rate
  * @max_freq: sensor maximum clock rate
- * @max_temp: sensor maximum temperature
- * @min_temp: sensor minimum temperature
- * @hyst_val: temperature hysteresis considered while converting ADC values
- * @update_int1: update interval
- * @update_int2: update interval
  *
  * This data structure will hold the required thresholds and temperature limits
  * for a specific temperature sensor, like shutdown temperature, alert
@@ -189,11 +162,6 @@ struct temp_sensor_data {
 	u32	t_cold;
 	u32	min_freq;
 	u32	max_freq;
-	int     max_temp;
-	int     min_temp;
-	int     hyst_val;
-	u32     update_int1; /* not used */
-	u32     update_int2; /* not used */
 };
 
 struct ti_bandgap_data;
@@ -316,8 +284,6 @@ struct ti_temp_sensor {
  *
  * TI_BANDGAP_FEATURE_ERRATA_814 - used to workaorund when the bandgap device
  *	has Errata 814
- * TI_BANDGAP_FEATURE_ERRATA_813 - used to workaorund when the bandgap device
- *	has Errata 813
  * TI_BANDGAP_FEATURE_UNRELIABLE - used when the sensor readings are too
  *	inaccurate.
  * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a
@@ -334,8 +300,7 @@ struct ti_temp_sensor {
 #define TI_BANDGAP_FEATURE_COUNTER_DELAY	BIT(8)
 #define TI_BANDGAP_FEATURE_HISTORY_BUFFER	BIT(9)
 #define TI_BANDGAP_FEATURE_ERRATA_814		BIT(10)
-#define TI_BANDGAP_FEATURE_ERRATA_813		BIT(11)
-#define TI_BANDGAP_FEATURE_UNRELIABLE		BIT(12)
+#define TI_BANDGAP_FEATURE_UNRELIABLE		BIT(11)
 #define TI_BANDGAP_HAS(b, f)			\
 			((b)->conf->features & TI_BANDGAP_FEATURE_ ## f)