Skip to content

L
linux
Commit d0440c59 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc 

Pull ARM SoC cleanups from Olof Johansson:
 "We've got a fairly large cleanup branch this time.  The bulk of this
  is removal of non-DT platforms of several flavors:

   - Atmel at91 platforms go full-DT, with removal of remaining
     board-file based support

   - OMAP removes legacy board files for three more platforms

   - removal of non-DT mach-msm, newer Qualcomm platforms now live in
     mach-qcom

   - Freescale i.MX25 also removes non-DT platform support"

Most of the rest of the changes here are fallout from the above, i.e. for
example removal of drivers that now lack platforms, etc.

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits)
  mmc: Remove msm_sdcc driver
  gpio: Remove gpio-msm-v1 driver
  ARM: Remove mach-msm and associated ARM architecture code
  ARM: shmobile: cpuidle: Remove the pointless default driver
  ARM: davinci: dm646x: Add interrupt resource for McASPs
  ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x
  ARM: davinci: dm646x: Clean up the McASP DMA resources
  ARM: davinci: devices-da8xx: Add support for McASP2 on da830
  ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation
  ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs
  ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request
  ARM: OMAP2+: Remove legacy support for omap3 TouchBook
  ARM: OMAP3: Remove legacy support for devkit8000
  ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board
  ARM: shmobile: Consolidate the pm code for R-Car Gen2
  ARM: shmobile: r8a7791: Correct SYSCIER value
  ARM: shmobile: r8a7790: Correct SYSCIER value
  ARM: at91: remove old setup
  ARM: at91: sama5d4: remove useless map_io
  ARM: at91: sama5 use SoC detection infrastructure
  ...
parents 38eb1dbb c4c14f39
Expand all Show whitespace changes
Inline Side-by-side
Showing with 1011 additions and 16245 deletions
Documentation/arm/00-INDEX
View file @ d0440c59
......@@ -10,8 +10,6 @@ IXP4xx
- Intel IXP4xx Network processor.
Makefile
- Build sourcefiles as part of the Documentation-build for arm
msm/
- MSM specific documentation
Netwinder
- Netwinder specific documentation
Porting
......
Documentation/arm/msm/gpiomux.txt deleted 100644 → 0
View file @ 38eb1dbb
This document provides an overview of the msm_gpiomux interface, which
is used to provide gpio pin multiplexing and configuration on mach-msm
targets.
History
=======
The first-generation API for gpio configuration & multiplexing on msm
is the function gpio_tlmm_config(). This function has a few notable
shortcomings, which led to its deprecation and replacement by gpiomux:
The 'disable' parameter: Setting the second parameter to
gpio_tlmm_config to GPIO_CFG_DISABLE tells the peripheral
processor in charge of the subsystem to perform a look-up into a
low-power table and apply the low-power/sleep setting for the pin.
As the msm family evolved this became problematic. Not all pins
have sleep settings, not all peripheral processors will accept requests
to apply said sleep settings, and not all msm targets have their gpio
subsystems managed by a peripheral processor. In order to get consistent
behavior on all targets, drivers are forced to ignore this parameter,
rendering it useless.
The 'direction' flag: for all mux-settings other than raw-gpio (0),
the output-enable bit of a gpio is hard-wired to a known
input (usually VDD or ground). For those settings, the direction flag
is meaningless at best, and deceptive at worst. In addition, using the
direction flag to change output-enable (OE) directly can cause trouble in
gpiolib, which has no visibility into gpio direction changes made
in this way. Direction control in gpio mode should be made through gpiolib.
Key Features of gpiomux
=======================
- A consistent interface across all generations of msm. Drivers can expect
the same results on every target.
- gpiomux plays nicely with gpiolib. Functions that should belong to gpiolib
are left to gpiolib and not duplicated here. gpiomux is written with the
intent that gpio_chips will call gpiomux reference-counting methods
from their request() and free() hooks, providing full integration.
- Tabular configuration. Instead of having to call gpio_tlmm_config
hundreds of times, gpio configuration is placed in a single table.
- Per-gpio sleep. Each gpio is individually reference counted, allowing only
those lines which are in use to be put in high-power states.
- 0 means 'do nothing': all flags are designed so that the default memset-zero
equates to a sensible default of 'no configuration', preventing users
from having to provide hundreds of 'no-op' configs for unused or
unwanted lines.
Usage
=====
To use gpiomux, provide configuration information for relevant gpio lines
in the msm_gpiomux_configs table. Since a 0 equates to "unconfigured",
only those lines to be managed by gpiomux need to be specified. Here
is a completely fictional example:
struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
[12] = {
.active = GPIOMUX_VALID | GPIOMUX_DRV_8MA | GPIOMUX_FUNC_1,
.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
},
[34] = {
.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
},
};
To indicate that a gpio is in use, call msm_gpiomux_get() to increase
its reference count. To decrease the reference count, call msm_gpiomux_put().
The effect of this configuration is as follows:
When the system boots, gpios 12 and 34 will be initialized with their
'suspended' configurations. All other gpios, which were left unconfigured,
will not be touched.
When msm_gpiomux_get() is called on gpio 12 to raise its reference count
above 0, its active configuration will be applied. Since no other gpio
line has a valid active configuration, msm_gpiomux_get() will have no
effect on any other line.
When msm_gpiomux_put() is called on gpio 12 or 34 to drop their reference
count to 0, their suspended configurations will be applied.
Since no other gpio line has a valid suspended configuration, no other
gpio line will be effected by msm_gpiomux_put(). Since gpio 34 has no valid
active configuration, this is effectively a no-op for gpio 34 as well,
with one small caveat, see the section "About Output-Enable Settings".
All of the GPIOMUX_VALID flags may seem like unnecessary overhead, but
they address some important issues. As unused entries (all those
except 12 and 34) are zero-filled, gpiomux needs a way to distinguish
the used fields from the unused. In addition, the all-zero pattern
is a valid configuration! Therefore, gpiomux defines an additional bit
which is used to indicate when a field is used. This has the pleasant
side-effect of allowing calls to msm_gpiomux_write to use '0' to indicate
that a value should not be changed:
msm_gpiomux_write(0, GPIOMUX_VALID, 0);
replaces the active configuration of gpio 0 with an all-zero configuration,
but leaves the suspended configuration as it was.
Static Configurations
=====================
To install a static configuration, which is applied at boot and does
not change after that, install a configuration with a suspended component
but no active component, as in the previous example:
[34] = {
.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
},
The suspended setting is applied during boot, and the lack of any valid
active setting prevents any other setting from being applied at runtime.
If other subsystems attempting to access the line is a concern, one could
*really* anchor the configuration down by calling msm_gpiomux_get on the
line at initialization to move the line into active mode. With the line
held, it will never be re-suspended, and with no valid active configuration,
no new configurations will be applied.
But then, if having other subsystems grabbing for the line is truly a concern,
it should be reserved with gpio_request instead, which carries an implicit
msm_gpiomux_get.
gpiomux and gpiolib
===================
It is expected that msm gpio_chips will call msm_gpiomux_get() and
msm_gpiomux_put() from their request and free hooks, like this fictional
example:
static int request(struct gpio_chip *chip, unsigned offset)
{
return msm_gpiomux_get(chip->base + offset);
}
static void free(struct gpio_chip *chip, unsigned offset)
{
msm_gpiomux_put(chip->base + offset);
}
...somewhere in a gpio_chip declaration...
.request = request,
.free = free,
This provides important functionality:
- It guarantees that a gpio line will have its 'active' config applied
when the line is requested, and will not be suspended while the line
remains requested; and
- It guarantees that gpio-direction settings from gpiolib behave sensibly.
See "About Output-Enable Settings."
This mechanism allows for "auto-request" of gpiomux lines via gpiolib
when it is suitable. Drivers wishing more exact control are, of course,
free to also use msm_gpiomux_set and msm_gpiomux_get.
About Output-Enable Settings
============================
Some msm targets do not have the ability to query the current gpio
configuration setting. This means that changes made to the output-enable
(OE) bit by gpiolib cannot be consistently detected and preserved by gpiomux.
Therefore, when gpiomux applies a configuration setting, any direction
settings which may have been applied by gpiolib are lost and the default
input settings are re-applied.
For this reason, drivers should not assume that gpio direction settings
continue to hold if they free and then re-request a gpio. This seems like
common sense - after all, anybody could have obtained the line in the
meantime - but it needs saying.
This also means that calls to msm_gpiomux_write will reset the OE bit,
which means that if the gpio line is held by a client of gpiolib and
msm_gpiomux_write is called, the direction setting has been lost and
gpiolib's internal state has been broken.
Release gpio lines before reconfiguring them.
Documentation/devicetree/bindings/serial/atmel-usart.txt
View file @ d0440c59
* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
Required properties:
- compatible: Should be "atmel,<chip>-usart"
- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
The compatible <chip> indicated will be the first SoC to support an
additional mode or an USART new feature.
For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt
- clock-names: tuple listing input clock names.
......
MAINTAINERS
View file @ d0440c59
......@@ -1261,22 +1261,6 @@ L: openmoko-kernel@lists.openmoko.org (subscribers-only)
W: http://wiki.openmoko.org/wiki/Neo_FreeRunner
S: Supported
ARM/QUALCOMM MSM MACHINE SUPPORT
M: David Brown <davidb@codeaurora.org>
M: Daniel Walker <dwalker@fifo99.com>
M: Bryan Huntsman <bryanh@codeaurora.org>
L: linux-arm-msm@vger.kernel.org
F: arch/arm/mach-msm/
F: drivers/video/fbdev/msm/
F: drivers/mmc/host/msm_sdcc.c
F: drivers/mmc/host/msm_sdcc.h
F: drivers/tty/serial/msm_serial.h
F: drivers/tty/serial/msm_serial.c
F: drivers/*/pm8???-*
F: drivers/mfd/ssbi.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git
S: Maintained
ARM/TOSA MACHINE SUPPORT
M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
M: Dirk Opfer <dirk@opfer-online.de>
......@@ -1334,6 +1318,10 @@ L: linux-soc@vger.kernel.org
S: Maintained
F: arch/arm/mach-qcom/
F: drivers/soc/qcom/
F: drivers/tty/serial/msm_serial.h
F: drivers/tty/serial/msm_serial.c
F: drivers/*/pm8???-*
F: drivers/mfd/ssbi.c
T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
ARM/RADISYS ENP2611 MACHINE SUPPORT
......
arch/arm/Kconfig
View file @ d0440c59
......@@ -367,9 +367,9 @@ config ARCH_AT91
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select IRQ_DOMAIN
select NEED_MACH_IO_H if PCCARD
select PINCTRL
select PINCTRL_AT91
select SOC_BUS
select USE_OF
help
This enables support for systems based on Atmel
......@@ -632,18 +632,6 @@ config ARCH_PXA
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
config ARCH_MSM
bool "Qualcomm MSM (non-multiplatform)"
select ARCH_REQUIRE_GPIOLIB
select COMMON_CLK
select GENERIC_CLOCKEVENTS
help
Support for Qualcomm MSM/QSD based systems. This runs on the
apps processor of the MSM/QSD and depends on a shared memory
interface to the modem processor which runs the baseband
stack and controls some vital subsystems
(clock and power control, etc).
config ARCH_SHMOBILE_LEGACY
bool "Renesas ARM SoCs (non-multiplatform)"
select ARCH_SHMOBILE
......@@ -897,8 +885,6 @@ source "arch/arm/mach-ks8695/Kconfig"
source "arch/arm/mach-meson/Kconfig"
source "arch/arm/mach-msm/Kconfig"
source "arch/arm/mach-moxart/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig"
......
arch/arm/Kconfig.debug
View file @ d0440c59
......@@ -448,25 +448,6 @@ choice
Say Y here if you want kernel low-level debugging support
on MMP UART3.
config DEBUG_MSM_UART
bool "Kernel low-level debugging messages via MSM UART"
depends on ARCH_MSM
help
Say Y here if you want the debug print routines to direct
their output to the serial port on MSM devices.
ARCH DEBUG_UART_PHYS DEBUG_UART_VIRT #
MSM7X00A, QSD8X50 0xa9a00000 0xe1000000 UART1
MSM7X00A, QSD8X50 0xa9b00000 0xe1000000 UART2
MSM7X00A, QSD8X50 0xa9c00000 0xe1000000 UART3
MSM7X30 0xaca00000 0xe1000000 UART1
MSM7X30 0xacb00000 0xe1000000 UART2
MSM7X30 0xacc00000 0xe1000000 UART3
Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration
options based on your needs.
config DEBUG_QCOM_UARTDM
bool "Kernel low-level debugging messages via QCOM UARTDM"
depends on ARCH_QCOM
......@@ -806,7 +787,7 @@ choice
via SCIF2 on Renesas R-Car H1 (R8A7779).
config DEBUG_RCAR_GEN2_SCIF0
bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793)"
bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793"
depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793
help
Say Y here if you want kernel low-level debugging support
......@@ -1295,7 +1276,7 @@ config DEBUG_LL_INCLUDE
DEBUG_IMX6SL_UART || \
DEBUG_IMX6SX_UART
default "debug/ks8695.S" if DEBUG_KS8695_UART
default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
default "debug/msm.S" if DEBUG_QCOM_UARTDM
default "debug/netx.S" if DEBUG_NETX_UART
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
......@@ -1388,7 +1369,6 @@ config DEBUG_UART_PHYS
default 0x80230000 if DEBUG_PICOXCELL_UART
default 0x808c0000 if ARCH_EP93XX
default 0x90020000 if DEBUG_NSPIRE_CLASSIC_UART || DEBUG_NSPIRE_CX_UART
default 0xa9a00000 if DEBUG_MSM_UART
default 0xb0060000 if DEBUG_SIRFPRIMA2_UART1
default 0xb0090000 if DEBUG_VEXPRESS_UART0_CRX
default 0xc0013000 if DEBUG_U300_UART
......@@ -1433,7 +1413,7 @@ config DEBUG_UART_PHYS
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_NETX_UART || \
DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
......@@ -1446,7 +1426,6 @@ config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
default 0xe0000a00 if DEBUG_NETX_UART
default 0xe0010fe0 if ARCH_RPC
default 0xe1000000 if DEBUG_MSM_UART
default 0xf0000be0 if ARCH_EBSA110
default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf01fb000 if DEBUG_NOMADIK_UART
......@@ -1526,7 +1505,7 @@ config DEBUG_UART_VIRT
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_NETX_UART || \
DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
......@@ -1556,7 +1535,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
config DEBUG_UNCOMPRESS
bool
depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG
depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM)
help
......
arch/arm/Makefile
View file @ d0440c59
......@@ -136,7 +136,6 @@ textofs-$(CONFIG_PM_H1940) := 0x00108000
ifeq ($(CONFIG_ARCH_SA1100),y)
textofs-$(CONFIG_SA1111) := 0x00208000
endif
textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
......@@ -171,7 +170,6 @@ machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx
machine-$(CONFIG_ARCH_MESON) += meson
machine-$(CONFIG_ARCH_MMP) += mmp
machine-$(CONFIG_ARCH_MOXART) += moxart
machine-$(CONFIG_ARCH_MSM) += msm
machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0
machine-$(CONFIG_ARCH_MVEBU) += mvebu
machine-$(CONFIG_ARCH_MXC) += imx
......
arch/arm/boot/dts/at91rm9200.dtsi
View file @ d0440c59
......@@ -830,7 +830,7 @@ pioD: gpio@fffffa00 {
};
dbgu: serial@fffff200 {
compatible = "atmel,at91rm9200-usart";
compatible = "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
......
arch/arm/boot/dts/at91sam9260.dtsi
View file @ d0440c59
......@@ -753,7 +753,7 @@ pioC: gpio@fffff800 {
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
......
arch/arm/boot/dts/at91sam9261.dtsi
View file @ d0440c59
......@@ -276,7 +276,7 @@ aic: interrupt-controller@fffff000 {
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
......
arch/arm/boot/dts/at91sam9263.dtsi
View file @ d0440c59
......@@ -762,7 +762,7 @@ pioE: gpio@fffffa00 {
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
......
arch/arm/boot/dts/at91sam9g45.dtsi
View file @ d0440c59
......@@ -893,7 +893,7 @@ pioE: gpio@fffffa00 {
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
......
arch/arm/boot/dts/at91sam9n12.dtsi
View file @ d0440c59
......@@ -757,7 +757,7 @@ pioD: gpio@fffffa00 {
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
......
arch/arm/boot/dts/at91sam9rl.dtsi
View file @ d0440c59
......@@ -377,7 +377,7 @@ aic: interrupt-controller@fffff000 {
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
......
arch/arm/boot/dts/at91sam9x5.dtsi
View file @ d0440c59
......@@ -860,7 +860,7 @@ mmc1: mmc@f000c000 {
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
......
arch/arm/boot/dts/sama5d3.dtsi
View file @ d0440c59
......@@ -439,7 +439,7 @@ ramc0: ramc@ffffea00 {
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(13)>,
......
arch/arm/boot/dts/sama5d4.dtsi
View file @ d0440c59
......@@ -1064,7 +1064,7 @@ rtc@fc0686b0 {
};
dbgu: serial@fc069000 {
compatible = "atmel,at91sam9260-usart";
compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
reg = <0xfc069000 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
......
arch/arm/configs/imx_v4_v5_defconfig
View file @ d0440c59
......@@ -24,9 +24,8 @@ CONFIG_ARCH_MXC=y
CONFIG_MACH_SCB9328=y
CONFIG_MACH_APF9328=y
CONFIG_MACH_MX21ADS=y
CONFIG_MACH_MX25_3DS=y
CONFIG_MACH_EUKREA_CPUIMX25SD=y
CONFIG_MACH_IMX25_DT=y
CONFIG_SOC_IMX25=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y
......
arch/arm/configs/msm_defconfig deleted 100644 → 0
View file @ 38eb1dbb
CONFIG_SYSVIPC=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS_ALL=y
CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_MSM=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_HIGHMEM=y
CONFIG_HIGHPTE=y
CONFIG_CLEANCACHE=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_VFP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
CONFIG_CFG80211=y
CONFIG_RFKILL=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=y
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_SLIP=y
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_USB_USBNET=y
# CONFIG_USB_NET_AX8817X is not set
# CONFIG_USB_NET_ZAURUS is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
# CONFIG_MOUSE_PS2 is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_MSM=y
CONFIG_SERIAL_MSM_CONSOLE=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
CONFIG_THERMAL=y
CONFIG_REGULATOR=y
CONFIG_MEDIA_SUPPORT=y
CONFIG_FB=y
CONFIG_SOUND=y
CONFIG_SND=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
# CONFIG_SND_USB is not set
CONFIG_SND_SOC=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_MON=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_ACM=y
CONFIG_USB_SERIAL=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_VBUS_DRAW=500
CONFIG_RTC_CLASS=y
CONFIG_STAGING=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT4_FS=y
CONFIG_FUSE_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_CIFS=y
CONFIG_PRINTK_TIME=y
CONFIG_DYNAMIC_DEBUG=y
CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOCKUP_DETECTOR=y
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_TIMER_STATS=y
arch/arm/configs/multi_v5_defconfig
View file @ d0440c59
......@@ -13,7 +13,7 @@ CONFIG_ARCH_MVEBU=y
CONFIG_MACH_KIRKWOOD=y
CONFIG_MACH_NETXBIG=y
CONFIG_ARCH_MXC=y
CONFIG_MACH_IMX25_DT=y
CONFIG_SOC_IMX25=y
CONFIG_MACH_IMX27_DT=y
CONFIG_ARCH_U300=y
CONFIG_PCI_MVEBU=y
......
arch/arm/include/debug/msm.S
View file @ d0440c59
......@@ -16,24 +16,17 @@
*/
.macro addruart, rp, rv, tmp
#ifdef CONFIG_DEBUG_UART_PHYS
ldr \rp, =CONFIG_DEBUG_UART_PHYS
ldr \rv, =CONFIG_DEBUG_UART_VIRT
#endif
.endm
.macro senduart, rd, rx
ARM_BE8(rev \rd, \rd )
#ifdef CONFIG_DEBUG_QCOM_UARTDM
@ Write the 1 character to UARTDM_TF
str \rd, [\rx, #0x70]
#else
str \rd, [\rx, #0x0C]
#endif
.endm
.macro waituart, rd, rx
#ifdef CONFIG_DEBUG_QCOM_UARTDM
@ check for TX_EMT in UARTDM_SR
ldr \rd, [\rx, #0x08]
ARM_BE8(rev \rd, \rd )
......@@ -55,13 +48,6 @@ ARM_BE8(rev \rd, \rd )
str \rd, [\rx, #0x40]
@ UARTDM reg. Read to induce delay
ldr \rd, [\rx, #0x08]
#else
@ wait for TX_READY
1001: ldr \rd, [\rx, #0x08]
ARM_BE8(rev \rd, \rd )
tst \rd, #0x04
beq 1001b
#endif
.endm
.macro busyuart, rd, rx
......
arch/arm/mach-at91/Kconfig
View file @ d0440c59
......@@ -24,7 +24,7 @@ config SOC_SAMA5
select GENERIC_CLOCKEVENTS
select MEMORY
select ATMEL_SDRAMC
select PHYLIB if NETDEVICES
select SRAM if PM
menu "Atmel AT91 System-on-Chip"
......@@ -81,6 +81,8 @@ config SOC_AT91RM9200
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USB_CLK
select MIGHT_HAVE_PCI
select SRAM if PM
config SOC_AT91SAM9
bool "AT91SAM9"
......@@ -94,6 +96,7 @@ config SOC_AT91SAM9
select HAVE_AT91_UTMI
select HAVE_FB_ATMEL
select MEMORY
select SRAM if PM
help
Select this if you are using one of those Atmel SoC:
AT91SAM9260
......@@ -116,20 +119,6 @@ endif # SOC_SAM_V4_V5
comment "AT91 Feature Selections"
config AT91_SLOW_CLOCK
bool "Suspend-to-RAM disables main oscillator"
select SRAM
depends on SUSPEND
help
Select this if you want Suspend-to-RAM to save the most power
possible (without powering off the CPU) by disabling the PLLs
and main oscillator so that only the 32 KiHz clock is available.
When only that slow-clock is available, some peripherals lose
functionality. Many can't issue wakeup events unless faster
clocks are available. Some lose their operating state and
need to be completely re-initialized.
config AT91_TIMER_HZ
int "Kernel HZ (jiffies per second)"
range 32 1024
......
arch/arm/mach-at91/Makefile
View file @ d0440c59
......@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
obj-y := setup.o
obj-y := soc.o
obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o
......@@ -13,7 +13,7 @@ obj-$(CONFIG_SOC_SAMA5) += sama5.o
# Power Management
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o
obj-$(CONFIG_PM) += pm_suspend.o
ifeq ($(CONFIG_PM_DEBUG),y)
CFLAGS_pm.o += -DDEBUG
......
arch/arm/mach-at91/at91rm9200.c
View file @ d0440c59
......@@ -8,25 +8,22 @@
* Licensed under GPLv2 or later.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/system_misc.h>
#include <mach/at91_st.h>
#include "generic.h"
#include "soc.h"
static const struct at91_soc rm9200_socs[] = {
AT91_SOC(AT91RM9200_CIDR_MATCH, 0, "at91rm9200 BGA", "at91rm9200"),
{ /* sentinel */ },
};
static void at91rm9200_restart(enum reboot_mode reboot_mode, const char *cmd)
{
......@@ -45,15 +42,20 @@ static void __init at91rm9200_dt_timer_init(void)
static void __init at91rm9200_dt_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
struct soc_device *soc;
struct device *soc_dev = NULL;
soc = at91_soc_init(rm9200_socs);
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
arm_pm_idle = at91rm9200_idle;
arm_pm_restart = at91rm9200_restart;
at91rm9200_pm_init();
}
static const char *at91rm9200_dt_board_compat[] __initconst = {
"atmel,at91rm9200",
NULL
......@@ -61,7 +63,6 @@ static const char *at91rm9200_dt_board_compat[] __initconst = {
DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200")
.init_time = at91rm9200_dt_timer_init,
.map_io = at91_map_io,
.init_machine = at91rm9200_dt_device_init,
.dt_compat = at91rm9200_dt_board_compat,
MACHINE_END
arch/arm/mach-at91/at91sam9.c
View file @ d0440c59
......@@ -7,29 +7,68 @@
* Licensed under GPLv2 or later.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <asm/system_misc.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/system_misc.h>
#include "generic.h"
#include "soc.h"
static void __init at91sam9_dt_device_init(void)
static const struct at91_soc at91sam9_socs[] = {
AT91_SOC(AT91SAM9260_CIDR_MATCH, 0, "at91sam9260", NULL),
AT91_SOC(AT91SAM9261_CIDR_MATCH, 0, "at91sam9261", NULL),
AT91_SOC(AT91SAM9263_CIDR_MATCH, 0, "at91sam9263", NULL),
AT91_SOC(AT91SAM9G20_CIDR_MATCH, 0, "at91sam9g20", NULL),
AT91_SOC(AT91SAM9RL64_CIDR_MATCH, 0, "at91sam9rl64", NULL),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M11_EXID_MATCH,
"at91sam9m11", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9M10_EXID_MATCH,
"at91sam9m10", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G46_EXID_MATCH,
"at91sam9g46", "at91sam9g45"),
AT91_SOC(AT91SAM9G45_CIDR_MATCH, AT91SAM9G45_EXID_MATCH,
"at91sam9g45", "at91sam9g45"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G15_EXID_MATCH,
"at91sam9g15", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G35_EXID_MATCH,
"at91sam9g35", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X35_EXID_MATCH,
"at91sam9x35", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9G25_EXID_MATCH,
"at91sam9g25", "at91sam9x5"),
AT91_SOC(AT91SAM9X5_CIDR_MATCH, AT91SAM9X25_EXID_MATCH,
"at91sam9x25", "at91sam9x5"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN12_EXID_MATCH,
"at91sam9cn12", "at91sam9n12"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9N12_EXID_MATCH,
"at91sam9n12", "at91sam9n12"),
AT91_SOC(AT91SAM9N12_CIDR_MATCH, AT91SAM9CN11_EXID_MATCH,
"at91sam9cn11", "at91sam9n12"),
AT91_SOC(AT91SAM9XE128_CIDR_MATCH, 0, "at91sam9xe128", "at91sam9xe128"),
AT91_SOC(AT91SAM9XE256_CIDR_MATCH, 0, "at91sam9xe256", "at91sam9xe256"),
AT91_SOC(AT91SAM9XE512_CIDR_MATCH, 0, "at91sam9xe512", "at91sam9xe512"),
{ /* sentinel */ },
};
static void __init at91sam9_common_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
struct soc_device *soc;
struct device *soc_dev = NULL;
soc = at91_soc_init(at91sam9_socs);
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
arm_pm_idle = at91sam9_idle;
}
static void __init at91sam9_dt_device_init(void)
{
at91sam9_common_init();
at91sam9260_pm_init();
}
......@@ -40,16 +79,13 @@ static const char *at91_dt_board_compat[] __initconst = {
DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
/* Maintainer: Atmel */
.map_io = at91_map_io,
.init_machine = at91sam9_dt_device_init,
.dt_compat = at91_dt_board_compat,
MACHINE_END
static void __init at91sam9g45_dt_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
arm_pm_idle = at91sam9_idle;
at91sam9_common_init();
at91sam9g45_pm_init();
}
......@@ -60,16 +96,13 @@ static const char *at91sam9g45_board_compat[] __initconst = {
DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45")
/* Maintainer: Atmel */
.map_io = at91_map_io,
.init_machine = at91sam9g45_dt_device_init,
.dt_compat = at91sam9g45_board_compat,
MACHINE_END
static void __init at91sam9x5_dt_device_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
arm_pm_idle = at91sam9_idle;
at91sam9_common_init();
at91sam9x5_pm_init();
}
......@@ -81,7 +114,6 @@ static const char *at91sam9x5_board_compat[] __initconst = {
DT_MACHINE_START(at91sam9x5_dt, "Atmel AT91SAM9")
/* Maintainer: Atmel */
.map_io = at91_map_io,
.init_machine = at91sam9x5_dt_device_init,
.dt_compat = at91sam9x5_board_compat,
MACHINE_END
arch/arm/mach-at91/generic.h
View file @ d0440c59
......@@ -25,10 +25,6 @@ extern void at91rm9200_timer_init(void);
extern void at91rm9200_idle(void);
extern void at91sam9_idle(void);
/* Matrix */
extern void at91_ioremap_matrix(u32 base_addr);
#ifdef CONFIG_PM
extern void __init at91rm9200_pm_init(void);
extern void __init at91sam9260_pm_init(void);
......
arch/arm/mach-at91/include/mach/at91_matrix.h deleted 100644 → 0
View file @ 38eb1dbb
/*
* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Under GPLv2
*/
#ifndef __MACH_AT91_MATRIX_H__
#define __MACH_AT91_MATRIX_H__
#ifndef __ASSEMBLY__
extern void __iomem *at91_matrix_base;
#define at91_matrix_read(field) \
__raw_readl(at91_matrix_base + field)
#define at91_matrix_write(field, value) \
__raw_writel(value, at91_matrix_base + field)
#else
.extern at91_matrix_base
#endif
#endif /* __MACH_AT91_MATRIX_H__ */
arch/arm/mach-at91/include/mach/at91sam9260_matrix.h deleted 100644 → 0
View file @ 38eb1dbb
/*
* arch/arm/mach-at91/include/mach/at91sam9260_matrix.h
*
* Copyright (C) 2007 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9260 datasheet revision B.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91SAM9260_MATRIX_H
#define AT91SAM9260_MATRIX_H
#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91_MATRIX_ULBT_FOUR (2 << 0)
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_EBICSA 0x11C /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_CS3A_SMC (0 << 3)
#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_CS4A_SMC (0 << 4)
#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_CS5A_SMC (0 << 5)
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
#endif
arch/arm/mach-at91/include/mach/at91sam9261_matrix.h deleted 100644 → 0
View file @ 38eb1dbb
/*
* arch/arm/mach-at91/include/mach/at91sam9261_matrix.h
*
* Copyright (C) 2007 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9261 datasheet revision D.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91SAM9261_MATRIX_H
#define AT91SAM9261_MATRIX_H
#define AT91_MATRIX_MCFG 0x00 /* Master Configuration Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_SCFG0 0x04 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x08 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x0C /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x10 /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x14 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (7 << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_TCR 0x24 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_16 (5 << 0)
#define AT91_MATRIX_ITCM_32 (6 << 0)
#define AT91_MATRIX_ITCM_64 (7 << 0)
#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
#define AT91_MATRIX_DTCM_0 (0 << 4)
#define AT91_MATRIX_DTCM_16 (5 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
#define AT91_MATRIX_DTCM_64 (7 << 4)
#define AT91_MATRIX_EBICSA 0x30 /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_CS3A_SMC (0 << 3)
#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_CS4A_SMC (0 << 4)
#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_CS5A_SMC (0 << 5)
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_USBPUCR 0x34 /* USB Pad Pull-Up Control Register */
#define AT91_MATRIX_USBPUCR_PUON (1 << 30) /* USB Device PAD Pull-up Enable */
#endif
arch/arm/mach-at91/include/mach/at91sam9263_matrix.h deleted 100644 → 0
View file @ 38eb1dbb
/*
* arch/arm/mach-at91/include/mach/at91sam9263_matrix.h
*
* Copyright (C) 2006 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9263 datasheet revision B (Preliminary).
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91SAM9263_MATRIX_H
#define AT91SAM9263_MATRIX_H
#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */
#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */
#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91_MATRIX_ULBT_FOUR (2 << 0)
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */
#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */
#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */
#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */
#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */
#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */
#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */
#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */
#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */
#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */
#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_RCB2 (1 << 2)
#define AT91_MATRIX_RCB3 (1 << 3)
#define AT91_MATRIX_RCB4 (1 << 4)
#define AT91_MATRIX_RCB5 (1 << 5)
#define AT91_MATRIX_RCB6 (1 << 6)
#define AT91_MATRIX_RCB7 (1 << 7)
#define AT91_MATRIX_RCB8 (1 << 8)
#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_16 (5 << 0)
#define AT91_MATRIX_ITCM_32 (6 << 0)
#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
#define AT91_MATRIX_DTCM_0 (0 << 4)
#define AT91_MATRIX_DTCM_16 (5 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
#define AT91_MATRIX_EBI0CSA 0x120 /* EBI0 Chip Select Assignment Register */
#define AT91_MATRIX_EBI0_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI0_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI0_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI0_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI0_CS3A_SMC (0 << 3)
#define AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_EBI0_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_EBI0_CS4A_SMC (0 << 4)
#define AT91_MATRIX_EBI0_CS4A_SMC_CF1 (1 << 4)
#define AT91_MATRIX_EBI0_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_EBI0_CS5A_SMC (0 << 5)
#define AT91_MATRIX_EBI0_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_EBI0_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI0_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI0_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI0_VDDIOMSEL_3_3V (1 << 16)
#define AT91_MATRIX_EBI1CSA 0x124 /* EBI1 Chip Select Assignment Register */
#define AT91_MATRIX_EBI1_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI1_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI1_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI1_CS2A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI1_CS2A_SMC (0 << 3)
#define AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_EBI1_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI1_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI1_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI1_VDDIOMSEL_3_3V (1 << 16)
#endif
arch/arm/mach-at91/include/mach/at91sam9g45_matrix.h deleted 100644 → 0
View file @ 38eb1dbb
/*
* Matrix-centric header file for the AT91SAM9G45 family
*
* Copyright (C) 2008-2009 Atmel Corporation.
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9G45 preliminary datasheet.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef AT91SAM9G45_MATRIX_H
#define AT91SAM9G45_MATRIX_H
#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
#define AT91_MATRIX_MCFG6 0x18 /* Master Configuration Register 6 */
#define AT91_MATRIX_MCFG7 0x1C /* Master Configuration Register 7 */
#define AT91_MATRIX_MCFG8 0x20 /* Master Configuration Register 8 */
#define AT91_MATRIX_MCFG9 0x24 /* Master Configuration Register 9 */
#define AT91_MATRIX_MCFG10 0x28 /* Master Configuration Register 10 */
#define AT91_MATRIX_MCFG11 0x2C /* Master Configuration Register 11 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91_MATRIX_ULBT_FOUR (2 << 0)
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0)
#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0)
#define AT91_MATRIX_ULBT_128 (7 << 0)
#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
#define AT91_MATRIX_SCFG6 0x58 /* Slave Configuration Register 6 */
#define AT91_MATRIX_SCFG7 0x5C /* Slave Configuration Register 7 */
#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
#define AT91_MATRIX_PRBS0 0x84 /* Priority Register B for Slave 0 */
#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
#define AT91_MATRIX_PRBS1 0x8C /* Priority Register B for Slave 1 */
#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
#define AT91_MATRIX_PRBS2 0x94 /* Priority Register B for Slave 2 */
#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
#define AT91_MATRIX_PRBS3 0x9C /* Priority Register B for Slave 3 */
#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
#define AT91_MATRIX_PRBS4 0xA4 /* Priority Register B for Slave 4 */
#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
#define AT91_MATRIX_PRBS5 0xAC /* Priority Register B for Slave 5 */
#define AT91_MATRIX_PRAS6 0xB0 /* Priority Register A for Slave 6 */
#define AT91_MATRIX_PRBS6 0xB4 /* Priority Register B for Slave 6 */
#define AT91_MATRIX_PRAS7 0xB8 /* Priority Register A for Slave 7 */
#define AT91_MATRIX_PRBS7 0xBC /* Priority Register B for Slave 7 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_RCB2 (1 << 2)
#define AT91_MATRIX_RCB3 (1 << 3)
#define AT91_MATRIX_RCB4 (1 << 4)
#define AT91_MATRIX_RCB5 (1 << 5)
#define AT91_MATRIX_RCB6 (1 << 6)
#define AT91_MATRIX_RCB7 (1 << 7)
#define AT91_MATRIX_RCB8 (1 << 8)
#define AT91_MATRIX_RCB9 (1 << 9)
#define AT91_MATRIX_RCB10 (1 << 10)
#define AT91_MATRIX_RCB11 (1 << 11)
#define AT91_MATRIX_TCMR 0x110 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_32 (6 << 0)
#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
#define AT91_MATRIX_DTCM_0 (0 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
#define AT91_MATRIX_DTCM_64 (7 << 4)
#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */
#define AT91_MATRIX_TCM_NO_WS (0x0 << 11)
#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11)
#define AT91_MATRIX_VIDEO 0x118 /* Video Mode Configuration Register */
#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */
#define AT91C_VDEC_SEL_OFF (0 << 0)
#define AT91C_VDEC_SEL_ON (1 << 0)
#define AT91_MATRIX_EBICSA 0x128 /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4)
#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5)
#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
#define AT91_MATRIX_WPMR 0x1E4 /* Write Protect Mode Register */
#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
#define AT91_MATRIX_WPSR 0x1E8 /* Write Protect Status Register */
#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
#define AT91_MATRIX_WPSR_WPV (1 << 0)
#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
#endif
arch/arm/mach-at91/include/mach/at91sam9n12_matrix.h deleted 100644 → 0
View file @ 38eb1dbb
/*
* Matrix-centric header file for the AT91SAM9N12
*
* Copyright (C) 2012 Atmel Corporation.
*
* Only EBI related registers.
* Write Protect register definitions may be useful.
*
* Licensed under GPLv2 or later.
*/
#ifndef _AT91SAM9N12_MATRIX_H_
#define _AT91SAM9N12_MATRIX_H_
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x118) /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3)
#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */
#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */
#define AT91_MATRIX_MP_OFF (0 << 25)
#define AT91_MATRIX_MP_ON (1 << 25)
#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
#define AT91_MATRIX_WPSR_WPV (1 << 0)
#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
#endif
arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h deleted 100644 → 0
View file @ 38eb1dbb
/*
* arch/arm/mach-at91/include/mach/at91sam9rl_matrix.h
*
* Copyright (C) 2007 Atmel Corporation
*
* Memory Controllers (MATRIX, EBI) - System peripherals registers.
* Based on AT91SAM9RL datasheet revision A. (Preliminary)
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#ifndef AT91SAM9RL_MATRIX_H
#define AT91SAM9RL_MATRIX_H
#define AT91_MATRIX_MCFG0 0x00 /* Master Configuration Register 0 */
#define AT91_MATRIX_MCFG1 0x04 /* Master Configuration Register 1 */
#define AT91_MATRIX_MCFG2 0x08 /* Master Configuration Register 2 */
#define AT91_MATRIX_MCFG3 0x0C /* Master Configuration Register 3 */
#define AT91_MATRIX_MCFG4 0x10 /* Master Configuration Register 4 */
#define AT91_MATRIX_MCFG5 0x14 /* Master Configuration Register 5 */
#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
#define AT91_MATRIX_ULBT_FOUR (2 << 0)
#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
#define AT91_MATRIX_SCFG0 0x40 /* Slave Configuration Register 0 */
#define AT91_MATRIX_SCFG1 0x44 /* Slave Configuration Register 1 */
#define AT91_MATRIX_SCFG2 0x48 /* Slave Configuration Register 2 */
#define AT91_MATRIX_SCFG3 0x4C /* Slave Configuration Register 3 */
#define AT91_MATRIX_SCFG4 0x50 /* Slave Configuration Register 4 */
#define AT91_MATRIX_SCFG5 0x54 /* Slave Configuration Register 5 */
#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
#define AT91_MATRIX_PRAS0 0x80 /* Priority Register A for Slave 0 */
#define AT91_MATRIX_PRAS1 0x88 /* Priority Register A for Slave 1 */
#define AT91_MATRIX_PRAS2 0x90 /* Priority Register A for Slave 2 */
#define AT91_MATRIX_PRAS3 0x98 /* Priority Register A for Slave 3 */
#define AT91_MATRIX_PRAS4 0xA0 /* Priority Register A for Slave 4 */
#define AT91_MATRIX_PRAS5 0xA8 /* Priority Register A for Slave 5 */
#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
#define AT91_MATRIX_MRCR 0x100 /* Master Remap Control Register */
#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
#define AT91_MATRIX_RCB2 (1 << 2)
#define AT91_MATRIX_RCB3 (1 << 3)
#define AT91_MATRIX_RCB4 (1 << 4)
#define AT91_MATRIX_RCB5 (1 << 5)
#define AT91_MATRIX_TCMR 0x114 /* TCM Configuration Register */
#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
#define AT91_MATRIX_ITCM_0 (0 << 0)
#define AT91_MATRIX_ITCM_16 (5 << 0)
#define AT91_MATRIX_ITCM_32 (6 << 0)
#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
#define AT91_MATRIX_DTCM_0 (0 << 4)
#define AT91_MATRIX_DTCM_16 (5 << 4)
#define AT91_MATRIX_DTCM_32 (6 << 4)
#define AT91_MATRIX_EBICSA 0x120 /* EBI0 Chip Select Assignment Register */
#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_CS1A_SMC (0 << 1)
#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_CS3A_SMC (0 << 3)
#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
#define AT91_MATRIX_CS4A_SMC (0 << 4)
#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
#define AT91_MATRIX_CS5A_SMC (0 << 5)
#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_VDDIOMSEL_3_3V (1 << 16)
#endif
arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h deleted 100644 → 0
View file @ 38eb1dbb
/*
* Matrix-centric header file for the AT91SAM9x5 family
*
* Copyright (C) 2009-2012 Atmel Corporation.
*
* Only EBI related registers.
* Write Protect register definitions may be useful.
*
* Licensed under GPLv2 or later.
*/
#ifndef AT91SAM9X5_MATRIX_H
#define AT91SAM9X5_MATRIX_H
#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */
#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
#define AT91_MATRIX_EBI_CS3A_SMC_NANDFLASH (1 << 3)
#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
#define AT91_MATRIX_NFD0_SELECT (1 << 24) /* NAND Flash Data Bus Selection */
#define AT91_MATRIX_NFD0_ON_D0 (0 << 24)
#define AT91_MATRIX_NFD0_ON_D16 (1 << 24)
#define AT91_MATRIX_DDR_MP_EN (1 << 25) /* DDR Multi-port Enable */
#define AT91_MATRIX_MP_OFF (0 << 25)
#define AT91_MATRIX_MP_ON (1 << 25)
#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
#define AT91_MATRIX_WPSR_WPV (1 << 0)
#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
#endif
arch/arm/mach-at91/include/mach/io.h deleted 100644 → 0
View file @ 38eb1dbb
/*
* arch/arm/mach-at91/include/mach/io.h
*
* Copyright (C) 2003 SAN People
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
#define IO_SPACE_LIMIT 0xFFFFFFFF
#define __io(a) __typesafe_io(a)
#endif
arch/arm/mach-at91/pm.c
View file @ d0440c59
......@@ -29,6 +29,8 @@
#include <linux/atomic.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <asm/fncpy.h>
#include <asm/cacheflush.h>
#include <mach/cpu.h>
#include <mach/hardware.h>
......@@ -41,7 +43,6 @@ static struct {
int memctrl;
} at91_pm_data;
static void (*at91_pm_standby)(void);
void __iomem *at91_ramc_base[2];
static int at91_pm_valid_state(suspend_state_t state)
......@@ -119,15 +120,28 @@ int at91_suspend_entering_slow_clock(void)
}
EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0,
static void (*at91_suspend_sram_fn)(void __iomem *pmc, void __iomem *ramc0,
void __iomem *ramc1, int memctrl);
#ifdef CONFIG_AT91_SLOW_CLOCK
extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
extern void at91_pm_suspend_in_sram(void __iomem *pmc, void __iomem *ramc0,
void __iomem *ramc1, int memctrl);
extern u32 at91_slow_clock_sz;
#endif
extern u32 at91_pm_suspend_in_sram_sz;
static void at91_pm_suspend(suspend_state_t state)
{
unsigned int pm_data = at91_pm_data.memctrl;
pm_data |= (state == PM_SUSPEND_MEM) ?
AT91_PM_MODE(AT91_PM_SLOW_CLOCK) : 0;
flush_cache_all();
outer_disable();
at91_suspend_sram_fn(at91_pmc_base, at91_ramc_base[0],
at91_ramc_base[1], pm_data);
outer_resume();
}
static int at91_pm_enter(suspend_state_t state)
{
......@@ -136,8 +150,8 @@ static int at91_pm_enter(suspend_state_t state)
switch (state) {
/*
* Suspend-to-RAM is like STANDBY plus slow clock mode, so
* drivers must suspend more deeply: only the master clock
* controller may be using the main oscillator.
* drivers must suspend more deeply, the master clock switches
* to the clk32k and turns off the main oscillator
*/
case PM_SUSPEND_MEM:
/*
......@@ -146,23 +160,9 @@ static int at91_pm_enter(suspend_state_t state)
if (!at91_pm_verify_clocks())
goto error;
/*
* Enter slow clock mode by switching over to clk32k and
* turning off the main oscillator; reverse on wakeup.
*/
if (slow_clock) {
#ifdef CONFIG_AT91_SLOW_CLOCK
/* copy slow_clock handler to SRAM, and call it */
memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz);
#endif
slow_clock(at91_pmc_base, at91_ramc_base[0],
at91_ramc_base[1],
at91_pm_data.memctrl);
at91_pm_suspend(state);
break;
} else {
pr_info("AT91: PM - no slow clock mode enabled ...\n");
/* FALLTHROUGH leaving master clock alone */
}
/*
* STANDBY mode has *all* drivers suspended; ignores irqs not
......@@ -171,15 +171,7 @@ static int at91_pm_enter(suspend_state_t state)
* nothing fancy done with main or cpu clocks.
*/
case PM_SUSPEND_STANDBY:
/*
* NOTE: the Wait-for-Interrupt instruction needs to be
* in icache so no SDRAM accesses are needed until the
* wakeup IRQ occurs and self-refresh is terminated.
* For ARM 926 based chips, this requirement is weaker
* as at91sam9 can access a RAM in self-refresh mode.
*/
if (at91_pm_standby)
at91_pm_standby();
at91_pm_suspend(state);
break;
case PM_SUSPEND_ON:
......@@ -218,12 +210,10 @@ static struct platform_device at91_cpuidle_device = {
.name = "cpuidle-at91",
};
void at91_pm_set_standby(void (*at91_standby)(void))
static void at91_pm_set_standby(void (*at91_standby)(void))
{
if (at91_standby) {
if (at91_standby)
at91_cpuidle_device.dev.platform_data = at91_standby;
at91_pm_standby = at91_standby;
}
}
static const struct of_device_id ramc_ids[] __initconst = {
......@@ -263,7 +253,6 @@ static __init void at91_dt_ramc(void)
at91_pm_set_standby(standby);
}
#ifdef CONFIG_AT91_SLOW_CLOCK
static void __init at91_pm_sram_init(void)
{
struct gen_pool *sram_pool;
......@@ -291,30 +280,36 @@ static void __init at91_pm_sram_init(void)
return;
}
sram_base = gen_pool_alloc(sram_pool, at91_slow_clock_sz);
sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
if (!sram_base) {
pr_warn("%s: unable to alloc ocram!\n", __func__);
pr_warn("%s: unable to alloc sram!\n", __func__);
return;
}
sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
slow_clock = __arm_ioremap_exec(sram_pbase, at91_slow_clock_sz, false);
}
#endif
at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase,
at91_pm_suspend_in_sram_sz, false);
if (!at91_suspend_sram_fn) {
pr_warn("SRAM: Could not map\n");
return;
}
/* Copy the pm suspend handler to SRAM */
at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
}
static void __init at91_pm_init(void)
{
#ifdef CONFIG_AT91_SLOW_CLOCK
at91_pm_sram_init();
#endif
pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
if (at91_cpuidle_device.dev.platform_data)
platform_device_register(&at91_cpuidle_device);
if (at91_suspend_sram_fn)
suspend_set_ops(&at91_pm_ops);
else
pr_info("AT91: PM not supported, due to no SRAM allocated\n");
}
void __init at91rm9200_pm_init(void)
......
arch/arm/mach-at91/pm.h
View file @ d0440c59
......@@ -15,11 +15,13 @@
#include <mach/at91_ramc.h>
#ifdef CONFIG_PM
extern void at91_pm_set_standby(void (*at91_standby)(void));
#else
static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
#endif
#define AT91_PM_MEMTYPE_MASK 0x0f
#define AT91_PM_MODE_OFFSET 4
#define AT91_PM_MODE_MASK 0x01
#define AT91_PM_MODE(x) (((x) & AT91_PM_MODE_MASK) << AT91_PM_MODE_OFFSET)
#define AT91_PM_SLOW_CLOCK 0x01
/*
* The AT91RM9200 goes into self-refresh mode with this command, and will
......@@ -31,6 +33,7 @@ static inline void at91_pm_set_standby(void (*at91_standby)(void)) { }
* still in self-refresh is "not recommended", but seems to work.
*/
#ifndef __ASSEMBLY__
static inline void at91rm9200_standby(void)
{
u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
......@@ -112,3 +115,4 @@ static inline void at91sam9_sdram_standby(void)
}
#endif
#endif
arch/arm/mach-at91/sama5.c
View file @ d0440c59
......@@ -7,48 +7,50 @@
* Licensed under GPLv2 or later.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/micrel_phy.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy.h>
#include <linux/clk-provider.h>
#include <linux/phy.h>
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include "generic.h"
#include <asm/system_misc.h>
static int ksz8081_phy_fixup(struct phy_device *phy)
{
int value;
#include <mach/hardware.h>
value = phy_read(phy, 0x16);
value &= ~0x20;
phy_write(phy, 0x16, value);
#include "generic.h"
#include "soc.h"
return 0;
}
static const struct at91_soc sama5_socs[] = {
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D31_EXID_MATCH,
"sama5d31", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D33_EXID_MATCH,
"sama5d33", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D34_EXID_MATCH,
"sama5d34", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D35_EXID_MATCH,
"sama5d35", "sama5d3"),
AT91_SOC(SAMA5D3_CIDR_MATCH, SAMA5D36_EXID_MATCH,
"sama5d36", "sama5d3"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D41_EXID_MATCH,
"sama5d41", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D42_EXID_MATCH,
"sama5d42", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D43_EXID_MATCH,
"sama5d43", "sama5d4"),
AT91_SOC(SAMA5D4_CIDR_MATCH, SAMA5D44_EXID_MATCH,
"sama5d44", "sama5d4"),
{ /* sentinel */ },
};
static void __init sama5_dt_device_init(void)
{
if (of_machine_is_compatible("atmel,sama5d4ek") &&
IS_ENABLED(CONFIG_PHYLIB)) {
phy_register_fixup_for_id("fc028000.etherne:00",
ksz8081_phy_fixup);
}
struct soc_device *soc;
struct device *soc_dev = NULL;
soc = at91_soc_init(sama5_socs);
if (soc != NULL)
soc_dev = soc_device_to_device(soc);
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev);
at91sam9x5_pm_init();
}
......@@ -59,44 +61,10 @@ static const char *sama5_dt_board_compat[] __initconst = {
DT_MACHINE_START(sama5_dt, "Atmel SAMA5")
/* Maintainer: Atmel */
.map_io = at91_map_io,
.init_machine = sama5_dt_device_init,
.dt_compat = sama5_dt_board_compat,
MACHINE_END
static struct map_desc at91_io_desc[] __initdata = {
{
.virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_MPDDRC),
.pfn = __phys_to_pfn(SAMA5D4_BASE_MPDDRC),
.length = SZ_512,
.type = MT_DEVICE,
},
{
.virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_PMC),
.pfn = __phys_to_pfn(SAMA5D4_BASE_PMC),
.length = SZ_512,
.type = MT_DEVICE,
},
{ /* On sama5d4, we use USART3 as serial console */
.virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_USART3),
.pfn = __phys_to_pfn(SAMA5D4_BASE_USART3),
.length = SZ_256,
.type = MT_DEVICE,
},
{ /* A bunch of peripheral with fine grained IO space */
.virtual = (unsigned long)AT91_ALT_IO_P2V(SAMA5D4_BASE_SYS2),
.pfn = __phys_to_pfn(SAMA5D4_BASE_SYS2),
.length = SZ_2K,
.type = MT_DEVICE,
},
};
static void __init sama5_alt_map_io(void)
{
at91_alt_map_io();
iotable_init(at91_io_desc, ARRAY_SIZE(at91_io_desc));
}
static const char *sama5_alt_dt_board_compat[] __initconst = {
"atmel,sama5d4",
NULL
......@@ -104,7 +72,6 @@ static const char *sama5_alt_dt_board_compat[] __initconst = {
DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5")
/* Maintainer: Atmel */
.map_io = sama5_alt_map_io,
.init_machine = sama5_dt_device_init,
.dt_compat = sama5_alt_dt_board_compat,
.l2c_aux_mask = ~0UL,
......
arch/arm/mach-at91/setup.c deleted 100644 → 0
View file @ 38eb1dbb
/*
* Copyright (C) 2007 Atmel Corporation.
* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Under GPLv2
*/
#define pr_fmt(fmt) "AT91: " fmt
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <linux/pm.h>
#include <linux/of_address.h>
#include <linux/pinctrl/machine.h>
#include <linux/clk/at91_pmc.h>
#include <asm/system_misc.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
#include "generic.h"
#include "pm.h"
struct at91_socinfo at91_soc_initdata;
EXPORT_SYMBOL(at91_soc_initdata);
static struct map_desc at91_io_desc __initdata __maybe_unused = {
.virtual = (unsigned long)AT91_VA_BASE_SYS,
.pfn = __phys_to_pfn(AT91_BASE_SYS),
.length = SZ_16K,
.type = MT_DEVICE,
};
static struct map_desc at91_alt_io_desc __initdata __maybe_unused = {
.virtual = (unsigned long)AT91_ALT_VA_BASE_SYS,
.pfn = __phys_to_pfn(AT91_ALT_BASE_SYS),
.length = 24 * SZ_1K,
.type = MT_DEVICE,
};
static void __init soc_detect(u32 dbgu_base)
{
u32 cidr, socid;
cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
socid = cidr & ~AT91_CIDR_VERSION;
switch (socid) {
case ARCH_ID_AT91RM9200:
at91_soc_initdata.type = AT91_SOC_RM9200;
if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_UNKNOWN)
at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
break;
case ARCH_ID_AT91SAM9260:
at91_soc_initdata.type = AT91_SOC_SAM9260;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9261:
at91_soc_initdata.type = AT91_SOC_SAM9261;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9263:
at91_soc_initdata.type = AT91_SOC_SAM9263;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9G20:
at91_soc_initdata.type = AT91_SOC_SAM9G20;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9G45:
at91_soc_initdata.type = AT91_SOC_SAM9G45;
if (cidr == ARCH_ID_AT91SAM9G45ES)
at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES;
break;
case ARCH_ID_AT91SAM9RL64:
at91_soc_initdata.type = AT91_SOC_SAM9RL;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
break;
case ARCH_ID_AT91SAM9X5:
at91_soc_initdata.type = AT91_SOC_SAM9X5;
break;
case ARCH_ID_AT91SAM9N12:
at91_soc_initdata.type = AT91_SOC_SAM9N12;
break;
case ARCH_ID_SAMA5:
at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
at91_soc_initdata.type = AT91_SOC_SAMA5D3;
}
break;
}
/* at91sam9g10 */
if ((socid & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) {
at91_soc_initdata.type = AT91_SOC_SAM9G10;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE;
}
/* at91sam9xe */
else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) {
at91_soc_initdata.type = AT91_SOC_SAM9260;
at91_soc_initdata.subtype = AT91_SOC_SAM9XE;
}
if (!at91_soc_is_detected())
return;
at91_soc_initdata.cidr = cidr;
/* sub version of soc */
if (!at91_soc_initdata.exid)
at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
if (at91_soc_initdata.type == AT91_SOC_SAM9G45) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_AT91SAM9M10:
at91_soc_initdata.subtype = AT91_SOC_SAM9M10;
break;
case ARCH_EXID_AT91SAM9G46:
at91_soc_initdata.subtype = AT91_SOC_SAM9G46;
break;
case ARCH_EXID_AT91SAM9M11:
at91_soc_initdata.subtype = AT91_SOC_SAM9M11;
break;
}
}
if (at91_soc_initdata.type == AT91_SOC_SAM9X5) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_AT91SAM9G15:
at91_soc_initdata.subtype = AT91_SOC_SAM9G15;
break;
case ARCH_EXID_AT91SAM9G35:
at91_soc_initdata.subtype = AT91_SOC_SAM9G35;
break;
case ARCH_EXID_AT91SAM9X35:
at91_soc_initdata.subtype = AT91_SOC_SAM9X35;
break;
case ARCH_EXID_AT91SAM9G25:
at91_soc_initdata.subtype = AT91_SOC_SAM9G25;
break;
case ARCH_EXID_AT91SAM9X25:
at91_soc_initdata.subtype = AT91_SOC_SAM9X25;
break;
}
}
if (at91_soc_initdata.type == AT91_SOC_SAMA5D3) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_SAMA5D31:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D31;
break;
case ARCH_EXID_SAMA5D33:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D33;
break;
case ARCH_EXID_SAMA5D34:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D34;
break;
case ARCH_EXID_SAMA5D35:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D35;
break;
case ARCH_EXID_SAMA5D36:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D36;
break;
}
}
}
static void __init alt_soc_detect(u32 dbgu_base)
{
u32 cidr, socid;
/* SoC ID */
cidr = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_CIDR);
socid = cidr & ~AT91_CIDR_VERSION;
switch (socid) {
case ARCH_ID_SAMA5:
at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D3) {
at91_soc_initdata.type = AT91_SOC_SAMA5D3;
} else if (at91_soc_initdata.exid & ARCH_EXID_SAMA5D4) {
at91_soc_initdata.type = AT91_SOC_SAMA5D4;
}
break;
}
if (!at91_soc_is_detected())
return;
at91_soc_initdata.cidr = cidr;
/* sub version of soc */
if (!at91_soc_initdata.exid)
at91_soc_initdata.exid = __raw_readl(AT91_ALT_IO_P2V(dbgu_base) + AT91_DBGU_EXID);
if (at91_soc_initdata.type == AT91_SOC_SAMA5D4) {
switch (at91_soc_initdata.exid) {
case ARCH_EXID_SAMA5D41:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D41;
break;
case ARCH_EXID_SAMA5D42:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D42;
break;
case ARCH_EXID_SAMA5D43:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D43;
break;
case ARCH_EXID_SAMA5D44:
at91_soc_initdata.subtype = AT91_SOC_SAMA5D44;
break;
}
}
}
static const char *soc_name[] = {
[AT91_SOC_RM9200] = "at91rm9200",
[AT91_SOC_SAM9260] = "at91sam9260",
[AT91_SOC_SAM9261] = "at91sam9261",
[AT91_SOC_SAM9263] = "at91sam9263",
[AT91_SOC_SAM9G10] = "at91sam9g10",
[AT91_SOC_SAM9G20] = "at91sam9g20",
[AT91_SOC_SAM9G45] = "at91sam9g45",
[AT91_SOC_SAM9RL] = "at91sam9rl",
[AT91_SOC_SAM9X5] = "at91sam9x5",
[AT91_SOC_SAM9N12] = "at91sam9n12",
[AT91_SOC_SAMA5D3] = "sama5d3",
[AT91_SOC_SAMA5D4] = "sama5d4",
[AT91_SOC_UNKNOWN] = "Unknown",
};
const char *at91_get_soc_type(struct at91_socinfo *c)
{
return soc_name[c->type];
}
EXPORT_SYMBOL(at91_get_soc_type);
static const char *soc_subtype_name[] = {
[AT91_SOC_RM9200_BGA] = "at91rm9200 BGA",
[AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP",
[AT91_SOC_SAM9XE] = "at91sam9xe",
[AT91_SOC_SAM9G45ES] = "at91sam9g45es",
[AT91_SOC_SAM9M10] = "at91sam9m10",
[AT91_SOC_SAM9G46] = "at91sam9g46",
[AT91_SOC_SAM9M11] = "at91sam9m11",
[AT91_SOC_SAM9G15] = "at91sam9g15",
[AT91_SOC_SAM9G35] = "at91sam9g35",
[AT91_SOC_SAM9X35] = "at91sam9x35",
[AT91_SOC_SAM9G25] = "at91sam9g25",
[AT91_SOC_SAM9X25] = "at91sam9x25",
[AT91_SOC_SAMA5D31] = "sama5d31",
[AT91_SOC_SAMA5D33] = "sama5d33",
[AT91_SOC_SAMA5D34] = "sama5d34",
[AT91_SOC_SAMA5D35] = "sama5d35",
[AT91_SOC_SAMA5D36] = "sama5d36",
[AT91_SOC_SAMA5D41] = "sama5d41",
[AT91_SOC_SAMA5D42] = "sama5d42",
[AT91_SOC_SAMA5D43] = "sama5d43",
[AT91_SOC_SAMA5D44] = "sama5d44",
[AT91_SOC_SUBTYPE_NONE] = "None",
[AT91_SOC_SUBTYPE_UNKNOWN] = "Unknown",
};
const char *at91_get_soc_subtype(struct at91_socinfo *c)
{
return soc_subtype_name[c->subtype];
}
EXPORT_SYMBOL(at91_get_soc_subtype);
void __init at91_map_io(void)
{
/* Map peripherals */
iotable_init(&at91_io_desc, 1);
at91_soc_initdata.type = AT91_SOC_UNKNOWN;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
soc_detect(AT91_BASE_DBGU0);
if (!at91_soc_is_detected())
soc_detect(AT91_BASE_DBGU1);
if (!at91_soc_is_detected())
panic(pr_fmt("Impossible to detect the SOC type"));
pr_info("Detected soc type: %s\n",
at91_get_soc_type(&at91_soc_initdata));
if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
pr_info("Detected soc subtype: %s\n",
at91_get_soc_subtype(&at91_soc_initdata));
}
void __init at91_alt_map_io(void)
{
/* Map peripherals */
iotable_init(&at91_alt_io_desc, 1);
at91_soc_initdata.type = AT91_SOC_UNKNOWN;
at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_UNKNOWN;
alt_soc_detect(AT91_BASE_DBGU2);
if (!at91_soc_is_detected())
panic("AT91: Impossible to detect the SOC type");
pr_info("AT91: Detected soc type: %s\n",
at91_get_soc_type(&at91_soc_initdata));
if (at91_soc_initdata.subtype != AT91_SOC_SUBTYPE_NONE)
pr_info("AT91: Detected soc subtype: %s\n",
at91_get_soc_subtype(&at91_soc_initdata));
}
void __iomem *at91_matrix_base;
EXPORT_SYMBOL_GPL(at91_matrix_base);
void __init at91_ioremap_matrix(u32 base_addr)
{
at91_matrix_base = ioremap(base_addr, 512);
if (!at91_matrix_base)
panic(pr_fmt("Impossible to ioremap at91_matrix_base\n"));
}
arch/arm/mach-at91/soc.c 0 → 100644
View file @ d0440c59
/*
* Copyright (C) 2015 Atmel
*
* Alexandre Belloni <alexandre.belloni@free-electrons.com
* Boris Brezillon <boris.brezillon@free-electrons.com
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
*/
#define pr_fmt(fmt) "AT91: " fmt
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
#include "soc.h"
#define AT91_DBGU_CIDR 0x40
#define AT91_DBGU_CIDR_VERSION(x) ((x) & 0x1f)
#define AT91_DBGU_CIDR_EXT BIT(31)
#define AT91_DBGU_CIDR_MATCH_MASK 0x7fffffe0
#define AT91_DBGU_EXID 0x44
struct soc_device * __init at91_soc_init(const struct at91_soc *socs)
{
struct soc_device_attribute *soc_dev_attr;
const struct at91_soc *soc;
struct soc_device *soc_dev;
struct device_node *np;
void __iomem *regs;
u32 cidr, exid;
np = of_find_compatible_node(NULL, NULL, "atmel,at91rm9200-dbgu");
if (!np)
np = of_find_compatible_node(NULL, NULL,
"atmel,at91sam9260-dbgu");
if (!np) {
pr_warn("Could not find DBGU node");
return NULL;
}
regs = of_iomap(np, 0);
of_node_put(np);
if (!regs) {
pr_warn("Could not map DBGU iomem range");
return NULL;
}
cidr = readl(regs + AT91_DBGU_CIDR);
exid = readl(regs + AT91_DBGU_EXID);
iounmap(regs);
for (soc = socs; soc->name; soc++) {
if (soc->cidr_match != (cidr & AT91_DBGU_CIDR_MATCH_MASK))
continue;
if (!(cidr & AT91_DBGU_CIDR_EXT) || soc->exid_match == exid)
break;
}
if (!soc->name) {
pr_warn("Could not find matching SoC description\n");
return NULL;
}
soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
if (!soc_dev_attr)
return NULL;
soc_dev_attr->family = soc->family;
soc_dev_attr->soc_id = soc->name;
soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%X",
AT91_DBGU_CIDR_VERSION(cidr));
soc_dev = soc_device_register(soc_dev_attr);
if (IS_ERR(soc_dev)) {
kfree(soc_dev_attr->revision);
kfree(soc_dev_attr);
pr_warn("Could not register SoC device\n");
return NULL;
}
if (soc->family)
pr_info("Detected SoC family: %s\n", soc->family);
pr_info("Detected SoC: %s, revision %X\n", soc->name,
AT91_DBGU_CIDR_VERSION(cidr));
return soc_dev;
}
arch/arm/mach-at91/soc.h 0 → 100644
View file @ d0440c59
/*
* Copyright (C) 2015 Atmel
*
* Boris Brezillon <boris.brezillon@free-electrons.com
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
*/
#ifndef __AT91_SOC_H
#define __AT91_SOC_H
#include <linux/sys_soc.h>
struct at91_soc {
u32 cidr_match;
u32 exid_match;
const char *name;
const char *family;
};
#define AT91_SOC(__cidr, __exid, __name, __family) \
{ \
.cidr_match = (__cidr), \
.exid_match = (__exid), \
.name = (__name), \
.family = (__family), \
}
struct soc_device * __init
at91_soc_init(const struct at91_soc *socs);
#define AT91RM9200_CIDR_MATCH 0x09290780
#define AT91SAM9260_CIDR_MATCH 0x019803a0
#define AT91SAM9261_CIDR_MATCH 0x019703a0
#define AT91SAM9263_CIDR_MATCH 0x019607a0
#define AT91SAM9G20_CIDR_MATCH 0x019905a0
#define AT91SAM9RL64_CIDR_MATCH 0x019b03a0
#define AT91SAM9G45_CIDR_MATCH 0x019b05a0
#define AT91SAM9X5_CIDR_MATCH 0x019a05a0
#define AT91SAM9N12_CIDR_MATCH 0x019a07a0
#define AT91SAM9M11_EXID_MATCH 0x00000001
#define AT91SAM9M10_EXID_MATCH 0x00000002
#define AT91SAM9G46_EXID_MATCH 0x00000003
#define AT91SAM9G45_EXID_MATCH 0x00000004
#define AT91SAM9G15_EXID_MATCH 0x00000000
#define AT91SAM9G35_EXID_MATCH 0x00000001
#define AT91SAM9X35_EXID_MATCH 0x00000002
#define AT91SAM9G25_EXID_MATCH 0x00000003
#define AT91SAM9X25_EXID_MATCH 0x00000004
#define AT91SAM9CN12_EXID_MATCH 0x00000005
#define AT91SAM9N12_EXID_MATCH 0x00000006
#define AT91SAM9CN11_EXID_MATCH 0x00000009
#define AT91SAM9XE128_CIDR_MATCH 0x329973a0
#define AT91SAM9XE256_CIDR_MATCH 0x329a93a0
#define AT91SAM9XE512_CIDR_MATCH 0x329aa3a0
#define SAMA5D3_CIDR_MATCH 0x0a5c07c0
#define SAMA5D31_EXID_MATCH 0x00444300
#define SAMA5D33_EXID_MATCH 0x00414300
#define SAMA5D34_EXID_MATCH 0x00414301
#define SAMA5D35_EXID_MATCH 0x00584300
#define SAMA5D36_EXID_MATCH 0x00004301
#define SAMA5D4_CIDR_MATCH 0x0a5c07c0
#define SAMA5D41_EXID_MATCH 0x00000001
#define SAMA5D42_EXID_MATCH 0x00000002
#define SAMA5D43_EXID_MATCH 0x00000003
#define SAMA5D44_EXID_MATCH 0x00000004
#endif /* __AT91_SOC_H */
arch/arm/mach-davinci/asp.h
View file @ d0440c59
......@@ -21,6 +21,9 @@
/* Bases of da830 McASP1 register banks */
#define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000
/* Bases of da830 McASP2 register banks */
#define DAVINCI_DA830_MCASP2_REG_BASE 0x01D08000
/* EDMA channels of dm644x and dm355 */
#define DAVINCI_DMA_ASP0_TX 2
#define DAVINCI_DMA_ASP0_RX 3
......@@ -40,6 +43,10 @@
#define DAVINCI_DA830_DMA_MCASP1_AREVT 2
#define DAVINCI_DA830_DMA_MCASP1_AXEVT 3
/* EDMA channels of da830 McASP2 */
#define DAVINCI_DA830_DMA_MCASP2_AREVT 4
#define DAVINCI_DA830_DMA_MCASP2_AXEVT 5
/* Interrupts */
#define DAVINCI_ASP0_RX_INT IRQ_MBRINT
#define DAVINCI_ASP0_TX_INT IRQ_MBXINT
......
arch/arm/mach-davinci/devices-da8xx.c
View file @ d0440c59
......@@ -463,16 +463,23 @@ static struct resource da830_mcasp1_resources[] = {
},
/* TX event */
{
.name = "tx",
.start = DAVINCI_DA830_DMA_MCASP1_AXEVT,
.end = DAVINCI_DA830_DMA_MCASP1_AXEVT,
.flags = IORESOURCE_DMA,
},
/* RX event */
{
.name = "rx",
.start = DAVINCI_DA830_DMA_MCASP1_AREVT,
.end = DAVINCI_DA830_DMA_MCASP1_AREVT,
.flags = IORESOURCE_DMA,
},
{
.name = "common",
.start = IRQ_DA8XX_MCASPINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da830_mcasp1_device = {
......@@ -482,6 +489,41 @@ static struct platform_device da830_mcasp1_device = {
.resource = da830_mcasp1_resources,
};
static struct resource da830_mcasp2_resources[] = {
{
.name = "mpu",
.start = DAVINCI_DA830_MCASP2_REG_BASE,
.end = DAVINCI_DA830_MCASP2_REG_BASE + (SZ_1K * 12) - 1,
.flags = IORESOURCE_MEM,
},
/* TX event */
{
.name = "tx",
.start = DAVINCI_DA830_DMA_MCASP2_AXEVT,
.end = DAVINCI_DA830_DMA_MCASP2_AXEVT,
.flags = IORESOURCE_DMA,
},
/* RX event */
{
.name = "rx",
.start = DAVINCI_DA830_DMA_MCASP2_AREVT,
.end = DAVINCI_DA830_DMA_MCASP2_AREVT,
.flags = IORESOURCE_DMA,
},
{
.name = "common",
.start = IRQ_DA8XX_MCASPINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da830_mcasp2_device = {
.name = "davinci-mcasp",
.id = 2,
.num_resources = ARRAY_SIZE(da830_mcasp2_resources),
.resource = da830_mcasp2_resources,
};
static struct resource da850_mcasp_resources[] = {
{
.name = "mpu",
......@@ -491,16 +533,23 @@ static struct resource da850_mcasp_resources[] = {
},
/* TX event */
{
.name = "tx",
.start = DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
.end = DAVINCI_DA8XX_DMA_MCASP0_AXEVT,
.flags = IORESOURCE_DMA,
},
/* RX event */
{
.name = "rx",
.start = DAVINCI_DA8XX_DMA_MCASP0_AREVT,
.end = DAVINCI_DA8XX_DMA_MCASP0_AREVT,
.flags = IORESOURCE_DMA,
},
{
.name = "common",
.start = IRQ_DA8XX_MCASPINT,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device da850_mcasp_device = {
......@@ -512,14 +561,31 @@ static struct platform_device da850_mcasp_device = {
void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
{
/* DA830/OMAP-L137 has 3 instances of McASP */
if (cpu_is_davinci_da830() && id == 1) {
da830_mcasp1_device.dev.platform_data = pdata;
platform_device_register(&da830_mcasp1_device);
} else if (cpu_is_davinci_da850()) {
da850_mcasp_device.dev.platform_data = pdata;
platform_device_register(&da850_mcasp_device);
struct platform_device *pdev;
switch (id) {
case 0:
/* Valid for DA830/OMAP-L137 or DA850/OMAP-L138 */
pdev = &da850_mcasp_device;
break;
case 1:
/* Valid for DA830/OMAP-L137 only */
if (!cpu_is_davinci_da830())
return;
pdev = &da830_mcasp1_device;
break;
case 2:
/* Valid for DA830/OMAP-L137 only */
if (!cpu_is_davinci_da830())
return;
pdev = &da830_mcasp2_device;
break;
default:
return;
}
pdev->dev.platform_data = pdata;
platform_device_register(pdev);
}
static struct resource da8xx_pruss_resources[] = {
......
arch/arm/mach-davinci/dm646x.c
View file @ d0440c59
......@@ -493,7 +493,6 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
[IRQ_DM646X_EMACMISCINT] = 7,
[IRQ_DM646X_MCASP0TXINT] = 7,
[IRQ_DM646X_MCASP0RXINT] = 7,
[IRQ_AEMIFINT] = 7,
[IRQ_DM646X_RESERVED_3] = 7,
[IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
[IRQ_TINT0_TINT34] = 7, /* clocksource */
......@@ -610,19 +609,31 @@ static struct resource dm646x_mcasp0_resources[] = {
.end = DAVINCI_DM646X_MCASP0_REG_BASE + (SZ_1K << 1) - 1,
.flags = IORESOURCE_MEM,
},
/* first TX, then RX */
{
.name = "tx",
.start = DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
.end = DAVINCI_DM646X_DMA_MCASP0_AXEVT0,
.flags = IORESOURCE_DMA,
},
{
.name = "rx",
.start = DAVINCI_DM646X_DMA_MCASP0_AREVT0,
.end = DAVINCI_DM646X_DMA_MCASP0_AREVT0,
.flags = IORESOURCE_DMA,
},
{
.name = "tx",
.start = IRQ_DM646X_MCASP0TXINT,
.flags = IORESOURCE_IRQ,
},
{
.name = "rx",
.start = IRQ_DM646X_MCASP0RXINT,
.flags = IORESOURCE_IRQ,
},
};
/* DIT mode only, rx is not supported */
static struct resource dm646x_mcasp1_resources[] = {
{
.name = "mpu",
......@@ -630,17 +641,16 @@ static struct resource dm646x_mcasp1_resources[] = {
.end = DAVINCI_DM646X_MCASP1_REG_BASE + (SZ_1K << 1) - 1,
.flags = IORESOURCE_MEM,
},
/* DIT mode, only TX event */
{
.name = "tx",
.start = DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
.end = DAVINCI_DM646X_DMA_MCASP1_AXEVT1,
.flags = IORESOURCE_DMA,
},
/* DIT mode, dummy entry */
{
.start = -1,
.end = -1,
.flags = IORESOURCE_DMA,
.name = "tx",
.start = IRQ_DM646X_MCASP1TXINT,
.flags = IORESOURCE_IRQ,
},
};
......
arch/arm/mach-davinci/include/mach/irqs.h
View file @ d0440c59
......@@ -129,8 +129,8 @@
#define IRQ_DM646X_EMACMISCINT 27
#define IRQ_DM646X_MCASP0TXINT 28
#define IRQ_DM646X_MCASP0RXINT 29
#define IRQ_DM646X_MCASP1TXINT 30
#define IRQ_DM646X_RESERVED_3 31
#define IRQ_DM646X_MCASP1TXINT 32
#define IRQ_DM646X_VLQINT 38
#define IRQ_DM646X_UARTINT2 42
#define IRQ_DM646X_SPINT0 43
......
arch/arm/mach-imx/Kconfig
View file @ d0440c59
......@@ -77,13 +77,6 @@ config SOC_IMX21
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
config SOC_IMX25
bool
select ARCH_MXC_IOMUX_V3
select CPU_ARM926T
select MXC_AVIC
select PINCTRL_IMX25
config SOC_IMX27
bool
select CPU_ARM926T
......@@ -149,62 +142,6 @@ config MACH_MX21ADS
Include support for MX21ADS platform. This includes specific
configurations for the board and its peripherals.
comment "MX25 platforms:"
config MACH_MX25_3DS
bool "Support MX25PDK (3DS) Platform"
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select SOC_IMX25
config MACH_EUKREA_CPUIMX25SD
bool "Support Eukrea CPUIMX25 Platform"
select IMX_HAVE_PLATFORM_FLEXCAN
select IMX_HAVE_PLATFORM_FSL_USB2_UDC
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMXDI_RTC
select IMX_HAVE_PLATFORM_IMX_FB
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_MXC_EHCI
select IMX_HAVE_PLATFORM_MXC_NAND
select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
select USB_ULPI_VIEWPORT if USB_ULPI
select SOC_IMX25
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX25SD
default MACH_EUKREA_MBIMXSD25_BASEBOARD
config MACH_EUKREA_MBIMXSD25_BASEBOARD
bool "Eukrea MBIMXSD development board"
select IMX_HAVE_PLATFORM_GPIO_KEYS
select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_SPI_IMX
select LEDS_GPIO_REGISTER
help
This adds board specific devices that can be found on Eukrea's
MBIMXSD evaluation board.
endchoice
config MACH_IMX25_DT
bool "Support i.MX25 platforms from device tree"
select SOC_IMX25
help
Include support for Freescale i.MX25 based platforms
using the device tree for discovery
comment "MX27 platforms:"
config MACH_MX27ADS
......@@ -557,6 +494,20 @@ config MACH_VPR200
endif
if ARCH_MULTI_V5
comment "Device tree only"
config SOC_IMX25
bool "i.MX25 support"
select ARCH_MXC_IOMUX_V3
select CPU_ARM926T
select MXC_AVIC
select PINCTRL_IMX25
help
This enables support for Freescale i.MX25 processor
endif
if ARCH_MULTI_V7
comment "Device tree only"
......@@ -637,7 +588,7 @@ config SOC_VF610
select PL310_ERRATA_769419 if CACHE_L2X0
help
This enable support for Freescale Vybrid VF610 processor.
This enables support for Freescale Vybrid VF610 processor.
choice
prompt "Clocksource for scheduler clock"
......@@ -667,7 +618,7 @@ config SOC_LS1021A
select ZONE_DMA if ARM_LPAE
help
This enable support for Freescale LS1021A processor.
This enables support for Freescale LS1021A processor.
endif
......
arch/arm/mach-imx/Makefile
View file @ d0440c59
......@@ -3,7 +3,7 @@ obj-y := time.o cpu.o system.o irq-common.o
obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
obj-$(CONFIG_SOC_IMX25) += clk-imx25.o cpu-imx25.o mach-imx25.o
obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
......@@ -48,12 +48,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
# i.MX21 based machines
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
# i.MX25 based machines
obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
# i.MX27 based machines
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
......
arch/arm/mach-imx/clk-imx25.c
View file @ d0440c59
......@@ -30,7 +30,6 @@
#include "clk.h"
#include "common.h"
#include "hardware.h"
#include "mx25.h"
#define CCM_MPCTL 0x00
#define CCM_UPCTL 0x04
......@@ -239,80 +238,6 @@ static int __init __mx25_clocks_init(unsigned long osc_rate,
return 0;
}
int __init mx25_clocks_init(void)
{
void __iomem *ccm;
ccm = ioremap(MX25_CRM_BASE_ADDR, SZ_16K);
__mx25_clocks_init(24000000, ccm);
clk_register_clkdev(clk[gpt1_ipg], "ipg", "imx-gpt.0");
clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
/* i.mx25 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
clk_register_clkdev(clk[uart2_ipg], "ipg", "imx21-uart.1");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.1");
clk_register_clkdev(clk[uart3_ipg], "ipg", "imx21-uart.2");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.2");
clk_register_clkdev(clk[uart4_ipg], "ipg", "imx21-uart.3");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3");
clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4");
clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.1");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
/* i.mx25 has the i.mx35 type cspi */
clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2");
clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.0");
clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.1");
clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx21-i2c.2");
clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0");
clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0");
clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0");
clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx21-fb.0");
clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx21-fb.0");
clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx21-fb.0");
clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1");
clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");
clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1");
clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1");
clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1");
clk_register_clkdev(clk[csi_ipg_per], "per", "imx25-camera.0");
clk_register_clkdev(clk[csi_ipg], "ipg", "imx25-camera.0");
clk_register_clkdev(clk[csi_ahb], "ahb", "imx25-camera.0");
clk_register_clkdev(clk[dummy], "audmux", NULL);
clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0");
clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1");
/* i.mx25 has the i.mx35 type sdma */
clk_register_clkdev(clk[sdma_ipg], "ipg", "imx35-sdma");
clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
clk_register_clkdev(clk[iim_ipg], "iim", NULL);
mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1);
return 0;
}
static void __init mx25_clocks_init_dt(struct device_node *np)
{
struct device_node *refnp;
......
arch/arm/mach-imx/common.h
View file @ d0440c59
......@@ -23,13 +23,11 @@ struct of_device_id;
void mx1_map_io(void);
void mx21_map_io(void);
void mx25_map_io(void);
void mx27_map_io(void);
void mx31_map_io(void);
void mx35_map_io(void);
void imx1_init_early(void);
void imx21_init_early(void);
void imx25_init_early(void);
void imx27_init_early(void);
void imx31_init_early(void);
void imx35_init_early(void);
......@@ -37,13 +35,11 @@ void mxc_init_irq(void __iomem *);
void tzic_init_irq(void);
void mx1_init_irq(void);
void mx21_init_irq(void);
void mx25_init_irq(void);
void mx27_init_irq(void);
void mx31_init_irq(void);
void mx35_init_irq(void);
void imx1_soc_init(void);
void imx21_soc_init(void);
void imx25_soc_init(void);
void imx27_soc_init(void);
void imx31_soc_init(void);
void imx35_soc_init(void);
......@@ -51,7 +47,6 @@ void epit_timer_init(void __iomem *base, int irq);
void mxc_timer_init(void __iomem *, int);
int mx1_clocks_init(unsigned long fref);
int mx21_clocks_init(unsigned long lref, unsigned long fref);
int mx25_clocks_init(void);
int mx27_clocks_init(unsigned long fref);
int mx31_clocks_init(unsigned long fref);
int mx35_clocks_init(void);
......
arch/arm/mach-imx/cpu-imx25.c
View file @ d0440c59
......@@ -11,6 +11,8 @@
*/
#include <linux/module.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include "iim.h"
#include "hardware.h"
......@@ -20,8 +22,15 @@ static int mx25_cpu_rev = -1;
static int mx25_read_cpu_rev(void)
{
u32 rev;
void __iomem *iim_base;
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,imx25-iim");
iim_base = of_iomap(np, 0);
BUG_ON(!iim_base);
rev = readl(iim_base + MXC_IIMSREV);
iounmap(iim_base);
rev = __raw_readl(MX25_IO_ADDRESS(MX25_IIM_BASE_ADDR + MXC_IIMSREV));
switch (rev) {
case 0x00:
return IMX_CHIP_REVISION_1_0;
......
arch/arm/mach-imx/devices-imx25.h deleted 100644 → 0
View file @ 38eb1dbb
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include "devices/devices-common.h"
extern const struct imx_fec_data imx25_fec_data;
#define imx25_add_fec(pdata) \
imx_add_fec(&imx25_fec_data, pdata)
extern const struct imx_flexcan_data imx25_flexcan_data[];
#define imx25_add_flexcan(id) \
imx_add_flexcan(&imx25_flexcan_data[id])
#define imx25_add_flexcan0() imx25_add_flexcan(0)
#define imx25_add_flexcan1() imx25_add_flexcan(1)
extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data;
#define imx25_add_fsl_usb2_udc(pdata) \
imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata)
extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data;
#define imx25_add_imxdi_rtc() \
imx_add_imxdi_rtc(&imx25_imxdi_rtc_data)
extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data;
#define imx25_add_imx2_wdt() \
imx_add_imx2_wdt(&imx25_imx2_wdt_data)
extern const struct imx_imx_fb_data imx25_imx_fb_data;
#define imx25_add_imx_fb(pdata) \
imx_add_imx_fb(&imx25_imx_fb_data, pdata)
extern const struct imx_imx_i2c_data imx25_imx_i2c_data[];
#define imx25_add_imx_i2c(id, pdata) \
imx_add_imx_i2c(&imx25_imx_i2c_data[id], pdata)
#define imx25_add_imx_i2c0(pdata) imx25_add_imx_i2c(0, pdata)
#define imx25_add_imx_i2c1(pdata) imx25_add_imx_i2c(1, pdata)
#define imx25_add_imx_i2c2(pdata) imx25_add_imx_i2c(2, pdata)
extern const struct imx_imx_keypad_data imx25_imx_keypad_data;
#define imx25_add_imx_keypad(pdata) \
imx_add_imx_keypad(&imx25_imx_keypad_data, pdata)
extern const struct imx_imx_ssi_data imx25_imx_ssi_data[];
#define imx25_add_imx_ssi(id, pdata) \
imx_add_imx_ssi(&imx25_imx_ssi_data[id], pdata)
extern const struct imx_imx_uart_1irq_data imx25_imx_uart_data[];
#define imx25_add_imx_uart(id, pdata) \
imx_add_imx_uart_1irq(&imx25_imx_uart_data[id], pdata)
#define imx25_add_imx_uart0(pdata) imx25_add_imx_uart(0, pdata)
#define imx25_add_imx_uart1(pdata) imx25_add_imx_uart(1, pdata)
#define imx25_add_imx_uart2(pdata) imx25_add_imx_uart(2, pdata)
#define imx25_add_imx_uart3(pdata) imx25_add_imx_uart(3, pdata)
#define imx25_add_imx_uart4(pdata) imx25_add_imx_uart(4, pdata)
extern const struct imx_mx2_camera_data imx25_mx2_camera_data;
#define imx25_add_mx2_camera(pdata) \
imx_add_mx2_camera(&imx25_mx2_camera_data, pdata)
extern const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data;
#define imx25_add_mxc_ehci_otg(pdata) \
imx_add_mxc_ehci(&imx25_mxc_ehci_otg_data, pdata)
extern const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data;
#define imx25_add_mxc_ehci_hs(pdata) \
imx_add_mxc_ehci(&imx25_mxc_ehci_hs_data, pdata)
extern const struct imx_mxc_nand_data imx25_mxc_nand_data;
#define imx25_add_mxc_nand(pdata) \
imx_add_mxc_nand(&imx25_mxc_nand_data, pdata)
extern const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[];
#define imx25_add_sdhci_esdhc_imx(id, pdata) \
imx_add_sdhci_esdhc_imx(&imx25_sdhci_esdhc_imx_data[id], pdata)
extern const struct imx_spi_imx_data imx25_cspi_data[];
#define imx25_add_spi_imx(id, pdata) \
imx_add_spi_imx(&imx25_cspi_data[id], pdata)
#define imx25_add_spi_imx0(pdata) imx25_add_spi_imx(0, pdata)
#define imx25_add_spi_imx1(pdata) imx25_add_spi_imx(1, pdata)
#define imx25_add_spi_imx2(pdata) imx25_add_spi_imx(2, pdata)
arch/arm/mach-imx/devices/Kconfig
View file @ d0440c59
......@@ -21,9 +21,6 @@ config IMX_HAVE_PLATFORM_IMX27_CODA
config IMX_HAVE_PLATFORM_IMX2_WDT
bool
config IMX_HAVE_PLATFORM_IMXDI_RTC
bool
config IMX_HAVE_PLATFORM_IMX_FB
bool
......
arch/arm/mach-imx/devices/Makefile
View file @ d0440c59
......@@ -8,7 +8,6 @@ obj-y += platform-gpio-mxc.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX27_CODA) += platform-imx27-coda.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o
obj-y += platform-imx-dma.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_FB) += platform-imx-fb.o
obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX_I2C) += platform-imx-i2c.o
......
arch/arm/mach-imx/devices/platform-fec.c
View file @ d0440c59
......@@ -19,11 +19,6 @@
.irq = soc ## _INT_FEC, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_fec_data imx25_fec_data __initconst =
imx_fec_data_entry_single(MX25, "imx25-fec");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fec_data imx27_fec_data __initconst =
imx_fec_data_entry_single(MX27, "imx27-fec");
......
arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c
View file @ d0440c59
......@@ -18,11 +18,6 @@
.irq = soc ## _INT_USB_OTG, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
......
arch/arm/mach-imx/devices/platform-imx-fb.c
View file @ d0440c59
......@@ -29,11 +29,6 @@ const struct imx_imx_fb_data imx21_imx_fb_data __initconst =
imx_imx_fb_data_entry_single(MX21, "imx21-fb", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_imx_fb_data imx25_imx_fb_data __initconst =
imx_imx_fb_data_entry_single(MX25, "imx21-fb", SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_fb_data imx27_imx_fb_data __initconst =
imx_imx_fb_data_entry_single(MX27, "imx21-fb", SZ_4K);
......
arch/arm/mach-imx/devices/platform-imx-i2c.c
View file @ d0440c59
......@@ -31,16 +31,6 @@ const struct imx_imx_i2c_data imx21_imx_i2c_data __initconst =
imx_imx_i2c_data_entry_single(MX21, "imx21-i2c", 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_imx_i2c_data imx25_imx_i2c_data[] __initconst = {
#define imx25_imx_i2c_data_entry(_id, _hwid) \
imx_imx_i2c_data_entry(MX25, "imx21-i2c", _id, _hwid, SZ_16K)
imx25_imx_i2c_data_entry(0, 1),
imx25_imx_i2c_data_entry(1, 2),
imx25_imx_i2c_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_i2c_data imx27_imx_i2c_data[] __initconst = {
#define imx27_imx_i2c_data_entry(_id, _hwid) \
......
arch/arm/mach-imx/devices/platform-imx-keypad.c
View file @ d0440c59
......@@ -21,11 +21,6 @@ const struct imx_imx_keypad_data imx21_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX21, SZ_16);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_imx_keypad_data imx25_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX25, SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_keypad_data imx27_imx_keypad_data __initconst =
imx_imx_keypad_data_entry_single(MX27, SZ_16);
......
arch/arm/mach-imx/devices/platform-imx-ssi.c
View file @ d0440c59
......@@ -30,15 +30,6 @@ const struct imx_imx_ssi_data imx21_imx_ssi_data[] __initconst = {
};
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_imx_ssi_data imx25_imx_ssi_data[] __initconst = {
#define imx25_imx_ssi_data_entry(_id, _hwid) \
imx_imx_ssi_data_entry(MX25, _id, _hwid, SZ_4K)
imx25_imx_ssi_data_entry(0, 1),
imx25_imx_ssi_data_entry(1, 2),
};
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_ssi_data imx27_imx_ssi_data[] __initconst = {
#define imx27_imx_ssi_data_entry(_id, _hwid) \
......
arch/arm/mach-imx/devices/platform-imx-uart.c
View file @ d0440c59
......@@ -47,18 +47,6 @@ const struct imx_imx_uart_1irq_data imx21_imx_uart_data[] __initconst = {
};
#endif
#ifdef CONFIG_SOC_IMX25
const struct imx_imx_uart_1irq_data imx25_imx_uart_data[] __initconst = {
#define imx25_imx_uart_data_entry(_id, _hwid) \
imx_imx_uart_1irq_data_entry(MX25, _id, _hwid, SZ_16K)
imx25_imx_uart_data_entry(0, 1),
imx25_imx_uart_data_entry(1, 2),
imx25_imx_uart_data_entry(2, 3),
imx25_imx_uart_data_entry(3, 4),
imx25_imx_uart_data_entry(4, 5),
};
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx_uart_1irq_data imx27_imx_uart_data[] __initconst = {
#define imx27_imx_uart_data_entry(_id, _hwid) \
......
arch/arm/mach-imx/devices/platform-imx2-wdt.c
View file @ d0440c59
......@@ -25,11 +25,6 @@ const struct imx_imx2_wdt_data imx21_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX21, 0, , SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_imx2_wdt_data imx25_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX25, 0, , SZ_16K);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_imx2_wdt_data imx27_imx2_wdt_data __initconst =
imx_imx2_wdt_data_entry_single(MX27, 0, , SZ_4K);
......
arch/arm/mach-imx/devices/platform-imxdi_rtc.c deleted 100644 → 0
View file @ 38eb1dbb
/*
* Copyright (C) 2010 Pengutronix
* Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it under
* the terms of the GNU General Public License version 2 as published by the
* Free Software Foundation.
*/
#include <asm/sizes.h>
#include "../hardware.h"
#include "devices-common.h"
#define imx_imxdi_rtc_data_entry_single(soc) \
{ \
.iobase = soc ## _DRYICE_BASE_ADDR, \
.irq = soc ## _INT_DRYICE, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_imxdi_rtc_data imx25_imxdi_rtc_data __initconst =
imx_imxdi_rtc_data_entry_single(MX25);
#endif /* ifdef CONFIG_SOC_IMX25 */
struct platform_device *__init imx_add_imxdi_rtc(
const struct imx_imxdi_rtc_data *data)
{
struct resource res[] = {
{
.start = data->iobase,
.end = data->iobase + SZ_16K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = data->irq,
.end = data->irq,
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device("imxdi_rtc", 0,
res, ARRAY_SIZE(res), NULL, 0);
}
arch/arm/mach-imx/devices/platform-mx2-camera.c
View file @ d0440c59
......@@ -27,11 +27,6 @@
.irqemmaprp = soc ## _INT_EMMAPRP, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_mx2_camera_data imx25_mx2_camera_data __initconst =
imx_mx2_camera_data_entry_single(MX25, "imx25-camera");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mx2_camera_data imx27_mx2_camera_data __initconst =
imx_mx2_camera_data_entry_single_emma(MX27, "imx27-camera");
......
arch/arm/mach-imx/devices/platform-mxc-ehci.c
View file @ d0440c59
......@@ -18,13 +18,6 @@
.irq = soc ## _INT_USB_ ## hs, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_mxc_ehci_data imx25_mxc_ehci_otg_data __initconst =
imx_mxc_ehci_data_entry_single(MX25, 0, OTG);
const struct imx_mxc_ehci_data imx25_mxc_ehci_hs_data __initconst =
imx_mxc_ehci_data_entry_single(MX25, 1, HS);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data __initconst =
imx_mxc_ehci_data_entry_single(MX27, 0, OTG);
......
arch/arm/mach-imx/devices/platform-mxc_nand.c
View file @ d0440c59
......@@ -34,11 +34,6 @@ const struct imx_mxc_nand_data imx21_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX21, "imx21-nand", SZ_4K);
#endif /* ifdef CONFIG_SOC_IMX21 */
#ifdef CONFIG_SOC_IMX25
const struct imx_mxc_nand_data imx25_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX25, "imx25-nand", SZ_8K);
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_mxc_nand_data imx27_mxc_nand_data __initconst =
imx_mxc_nand_data_entry_single(MX27, "imx27-nand", SZ_4K);
......
arch/arm/mach-imx/devices/platform-spi_imx.c
View file @ d0440c59
......@@ -39,17 +39,6 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = {
};
#endif
#ifdef CONFIG_SOC_IMX25
/* i.mx25 has the i.mx35 type cspi */
const struct imx_spi_imx_data imx25_cspi_data[] __initconst = {
#define imx25_cspi_data_entry(_id, _hwid) \
imx_spi_imx_data_entry(MX25, CSPI, "imx35-cspi", _id, _hwid, SZ_16K)
imx25_cspi_data_entry(0, 1),
imx25_cspi_data_entry(1, 2),
imx25_cspi_data_entry(2, 3),
};
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_spi_imx_data imx27_cspi_data[] __initconst = {
#define imx27_cspi_data_entry(_id, _hwid) \
......
arch/arm/mach-imx/ehci-imx25.c deleted 100644 → 0
View file @ 38eb1dbb
/*
* Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
* Copyright (C) 2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*/
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/platform_data/usb-ehci-mxc.h>
#include "ehci.h"
#include "hardware.h"
#define USBCTRL_OTGBASE_OFFSET 0x600
#define MX25_OTG_SIC_SHIFT 29
#define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT)
#define MX25_OTG_PM_BIT (1 << 24)
#define MX25_OTG_PP_BIT (1 << 11)
#define MX25_OTG_OCPOL_BIT (1 << 3)
#define MX25_H1_SIC_SHIFT 21
#define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT)
#define MX25_H1_PP_BIT (1 << 18)
#define MX25_H1_PM_BIT (1 << 16)
#define MX25_H1_IPPUE_UP_BIT (1 << 7)
#define MX25_H1_IPPUE_DOWN_BIT (1 << 6)
#define MX25_H1_TLL_BIT (1 << 5)
#define MX25_H1_USBTE_BIT (1 << 4)
#define MX25_H1_OCPOL_BIT (1 << 2)
int mx25_initialize_usb_hw(int port, unsigned int flags)
{
unsigned int v;
v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
switch (port) {
case 0: /* OTG port */
v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT |
MX25_OTG_OCPOL_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX25_OTG_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX25_OTG_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX25_OTG_OCPOL_BIT;
break;
case 1: /* H1 port */
v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT |
MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT |
MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT);
v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT;
if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
v |= MX25_H1_PM_BIT;
if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
v |= MX25_H1_PP_BIT;
if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW))
v |= MX25_H1_OCPOL_BIT;
if (!(flags & MXC_EHCI_TTL_ENABLED))
v |= MX25_H1_TLL_BIT;
if (flags & MXC_EHCI_INTERNAL_PHY)
v |= MX25_H1_USBTE_BIT;
if (flags & MXC_EHCI_IPPUE_DOWN)
v |= MX25_H1_IPPUE_DOWN_BIT;
if (flags & MXC_EHCI_IPPUE_UP)
v |= MX25_H1_IPPUE_UP_BIT;
break;
default:
return -EINVAL;
}
writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR + USBCTRL_OTGBASE_OFFSET));
return 0;
}
arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c deleted 100644 → 0
View file @ 38eb1dbb
/*
* Copyright (C) 2010 Eric Benard - eric@eukrea.com
*
* Based on pcm970-baseboard.c which is :
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/spi/spi.h>
#include <video/platform_lcd.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "common.h"
#include "devices-imx25.h"
#include "hardware.h"
#include "iomux-mx25.h"
#include "mx25.h"
static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
/* LCD */
MX25_PAD_LD0__LD0,
MX25_PAD_LD1__LD1,
MX25_PAD_LD2__LD2,
MX25_PAD_LD3__LD3,
MX25_PAD_LD4__LD4,
MX25_PAD_LD5__LD5,
MX25_PAD_LD6__LD6,
MX25_PAD_LD7__LD7,
MX25_PAD_LD8__LD8,
MX25_PAD_LD9__LD9,
MX25_PAD_LD10__LD10,
MX25_PAD_LD11__LD11,
MX25_PAD_LD12__LD12,
MX25_PAD_LD13__LD13,
MX25_PAD_LD14__LD14,
MX25_PAD_LD15__LD15,
MX25_PAD_GPIO_E__LD16,
MX25_PAD_GPIO_F__LD17,
MX25_PAD_HSYNC__HSYNC,
MX25_PAD_VSYNC__VSYNC,
MX25_PAD_LSCLK__LSCLK,
MX25_PAD_OE_ACD__OE_ACD,
MX25_PAD_CONTRAST__CONTRAST,
/* LCD_PWR */
MX25_PAD_PWM__GPIO_1_26,
/* LED */
MX25_PAD_POWER_FAIL__GPIO_3_19,
/* SWITCH */
MX25_PAD_VSTBY_ACK__GPIO_3_18,
/* UART2 */
MX25_PAD_UART2_RTS__UART2_RTS,
MX25_PAD_UART2_CTS__UART2_CTS,
MX25_PAD_UART2_TXD__UART2_TXD,
MX25_PAD_UART2_RXD__UART2_RXD,
/* SD1 */
MX25_PAD_SD1_CMD__SD1_CMD,
MX25_PAD_SD1_CLK__SD1_CLK,
MX25_PAD_SD1_DATA0__SD1_DATA0,
MX25_PAD_SD1_DATA1__SD1_DATA1,
MX25_PAD_SD1_DATA2__SD1_DATA2,
MX25_PAD_SD1_DATA3__SD1_DATA3,
/* SD1 CD */
MX25_PAD_DE_B__GPIO_2_20,
/* I2S */
MX25_PAD_KPP_COL3__AUD5_TXFS,
MX25_PAD_KPP_COL2__AUD5_TXC,
MX25_PAD_KPP_COL1__AUD5_RXD,
MX25_PAD_KPP_COL0__AUD5_TXD,
/* CAN */
MX25_PAD_GPIO_D__CAN2_RX,
MX25_PAD_GPIO_C__CAN2_TX,
/* SPI1 */
MX25_PAD_CSPI1_MOSI__CSPI1_MOSI,
MX25_PAD_CSPI1_MISO__CSPI1_MISO,
MX25_PAD_CSPI1_SS0__GPIO_1_16,
MX25_PAD_CSPI1_SS1__GPIO_1_17,
MX25_PAD_CSPI1_SCLK__CSPI1_SCLK,
MX25_PAD_CSPI1_RDY__GPIO_2_22,
};
#define GPIO_LED1 IMX_GPIO_NR(3, 19)
#define GPIO_SWITCH1 IMX_GPIO_NR(3, 18)
#define GPIO_SD1CD IMX_GPIO_NR(2, 20)
#define GPIO_LCDPWR IMX_GPIO_NR(1, 26)
#define GPIO_SPI1_SS0 IMX_GPIO_NR(1, 16)
#define GPIO_SPI1_SS1 IMX_GPIO_NR(1, 17)
#define GPIO_SPI1_IRQ IMX_GPIO_NR(2, 22)
static struct imx_fb_videomode eukrea_mximxsd_modes[] = {
{
.mode = {
.name = "CMO-QVGA",
.refresh = 60,
.xres = 320,
.yres = 240,
.pixclock = KHZ2PICOS(6500),
.left_margin = 30,
.right_margin = 38,
.upper_margin = 20,
.lower_margin = 3,
.hsync_len = 15,
.vsync_len = 4,
},
.bpp = 16,
.pcr = 0xCAD08B80,
}, {
.mode = {
.name = "DVI-VGA",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 32000,
.hsync_len = 7,
.left_margin = 100,
.right_margin = 100,
.vsync_len = 7,
.upper_margin = 7,
.lower_margin = 100,
},
.pcr = 0xFA208B80,
.bpp = 16,
}, {
.mode = {
.name = "DVI-SVGA",
.refresh = 60,
.xres = 800,
.yres = 600,
.pixclock = 25000,
.hsync_len = 7,
.left_margin = 75,
.right_margin = 75,
.vsync_len = 7,
.upper_margin = 7,
.lower_margin = 75,
},
.pcr = 0xFA208B80,
.bpp = 16,
},
};
static const struct imx_fb_platform_data eukrea_mximxsd_fb_pdata __initconst = {
.mode = eukrea_mximxsd_modes,
.num_modes = ARRAY_SIZE(eukrea_mximxsd_modes),
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00040060,
};
static void eukrea_mbimxsd_lcd_power_set(struct plat_lcd_data *pd,
unsigned int power)
{
if (power)
gpio_direction_output(GPIO_LCDPWR, 1);
else
gpio_direction_output(GPIO_LCDPWR, 0);
}
static struct plat_lcd_data eukrea_mbimxsd_lcd_power_data = {
.set_power = eukrea_mbimxsd_lcd_power_set,
};
static struct platform_device eukrea_mbimxsd_lcd_powerdev = {
.name = "platform-lcd",
.dev.platform_data = &eukrea_mbimxsd_lcd_power_data,
};
static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = {
{
.name = "led1",
.default_trigger = "heartbeat",
.active_low = 1,
.gpio = GPIO_LED1,
},
};
static const struct gpio_led_platform_data
eukrea_mbimxsd_led_info __initconst = {
.leds = eukrea_mbimxsd_leds,
.num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds),
};
static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = {
{
.gpio = GPIO_SWITCH1,
.code = BTN_0,
.desc = "BP1",
.active_low = 1,
.wakeup = 1,
},
};
static const struct gpio_keys_platform_data
eukrea_mbimxsd_button_data __initconst = {
.buttons = eukrea_mbimxsd_gpio_buttons,
.nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons),
};
static struct platform_device *platform_devices[] __initdata = {
&eukrea_mbimxsd_lcd_powerdev,
};
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static struct i2c_board_info eukrea_mbimxsd_i2c_devices[] = {
{
I2C_BOARD_INFO("tlv320aic23", 0x1a),
},
};
static const
struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = {
.flags = IMX_SSI_SYN | IMX_SSI_NET | IMX_SSI_USE_I2S_SLAVE,
};
static struct esdhc_platform_data sd1_pdata = {
.cd_gpio = GPIO_SD1CD,
.cd_type = ESDHC_CD_GPIO,
.wp_type = ESDHC_WP_NONE,
};
static struct spi_board_info eukrea_mbimxsd25_spi_board_info[] __initdata = {
{
.modalias = "spidev",
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 0,
.mode = SPI_MODE_0,
},
{
.modalias = "spidev",
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 1,
.mode = SPI_MODE_0,
},
};
static int eukrea_mbimxsd25_spi_cs[] = {GPIO_SPI1_SS0, GPIO_SPI1_SS1};
static const struct spi_imx_master eukrea_mbimxsd25_spi0_data __initconst = {
.chipselect = eukrea_mbimxsd25_spi_cs,
.num_chipselect = ARRAY_SIZE(eukrea_mbimxsd25_spi_cs),
};
/*
* system init for baseboard usage. Will be called by cpuimx25 init.
*
* Add platform devices present on this baseboard and init
* them from CPU side as far as required to use them later on
*/
void __init eukrea_mbimxsd25_baseboard_init(void)
{
if (mxc_iomux_v3_setup_multiple_pads(eukrea_mbimxsd_pads,
ARRAY_SIZE(eukrea_mbimxsd_pads)))
printk(KERN_ERR "error setting mbimxsd pads !\n");
imx25_add_imx_uart1(&uart_pdata);
imx25_add_imx_fb(&eukrea_mximxsd_fb_pdata);
imx25_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata);
imx25_add_flexcan1();
imx25_add_sdhci_esdhc_imx(0, &sd1_pdata);
gpio_request(GPIO_LED1, "LED1");
gpio_direction_output(GPIO_LED1, 1);
gpio_free(GPIO_LED1);
gpio_request(GPIO_SWITCH1, "SWITCH1");
gpio_direction_input(GPIO_SWITCH1);
gpio_free(GPIO_SWITCH1);
gpio_request(GPIO_LCDPWR, "LCDPWR");
gpio_direction_output(GPIO_LCDPWR, 1);
i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices,
ARRAY_SIZE(eukrea_mbimxsd_i2c_devices));
gpio_request(GPIO_SPI1_IRQ, "SPI1_IRQ");
gpio_direction_input(GPIO_SPI1_IRQ);
gpio_free(GPIO_SPI1_IRQ);
imx25_add_spi_imx0(&eukrea_mbimxsd25_spi0_data);
spi_register_board_info(eukrea_mbimxsd25_spi_board_info,
ARRAY_SIZE(eukrea_mbimxsd25_spi_board_info));
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
gpio_led_register_device(-1, &eukrea_mbimxsd_led_info);
imx_add_gpio_keys(&eukrea_mbimxsd_button_data);
imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0);
}
arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c
View file @ d0440c59
......@@ -100,7 +100,7 @@ static struct mx3fb_platform_data mx3fb_pdata __initdata = {
.num_modes = ARRAY_SIZE(fb_modedb),
};
static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = {
static const iomux_v3_cfg_t eukrea_mbimxsd_pads[] __initconst = {
/* LCD */
MX35_PAD_LD0__IPU_DISPB_DAT_0,
MX35_PAD_LD1__IPU_DISPB_DAT_1,
......
arch/arm/mach-imx/hardware.h
View file @ d0440c59
......@@ -112,7 +112,6 @@
#include "mx21.h"
#include "mx27.h"
#include "mx1.h"
#include "mx25.h"
#define imx_map_entry(soc, name, _type) { \
.virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \
......
arch/arm/mach-imx/iomux-mx25.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-imx/iomux-mx3.h
View file @ d0440c59
......@@ -114,7 +114,7 @@ enum iomux_gp_func {
*/
int mxc_iomux_alloc_pin(unsigned int pin, const char *label);
/*
* setups mutliple pins
* setups multiple pins
* convenient way to call the above function with tables
*/
int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count,
......
arch/arm/mach-imx/iomux-v3.c
View file @ d0440c59
......@@ -56,9 +56,10 @@ int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad)
return 0;
}
int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count)
int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
unsigned count)
{
iomux_v3_cfg_t *p = pad_list;
const iomux_v3_cfg_t *p = pad_list;
int i;
int ret;
......
arch/arm/mach-imx/iomux-v3.h
View file @ d0440c59
......@@ -128,10 +128,11 @@ typedef u64 iomux_v3_cfg_t;
int mxc_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
/*
* setups mutliple pads
* setups multiple pads
* convenient way to call the above function with tables
*/
int mxc_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t *pad_list, unsigned count);
int mxc_iomux_v3_setup_multiple_pads(const iomux_v3_cfg_t *pad_list,
unsigned count);
/*
* Initialise the iomux controller
......
arch/arm/mach-imx/mach-cpuimx35.c
View file @ d0440c59
......@@ -75,7 +75,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = {
},
};
static iomux_v3_cfg_t eukrea_cpuimx35_pads[] = {
static const iomux_v3_cfg_t eukrea_cpuimx35_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
......
arch/arm/mach-imx/mach-eukrea_cpuimx25.c deleted 100644 → 0
View file @ 38eb1dbb
/*
* Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
* Copyright 2010 Eric Bénard - Eukréa Electromatique, <eric@eukrea.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/memory.h>
#include <asm/mach/map.h>
#include "common.h"
#include "devices-imx25.h"
#include "ehci.h"
#include "eukrea-baseboards.h"
#include "hardware.h"
#include "iomux-mx25.h"
#include "mx25.h"
static const struct imxuart_platform_data uart_pdata __initconst = {
.flags = IMXUART_HAVE_RTSCTS,
};
static iomux_v3_cfg_t eukrea_cpuimx25_pads[] = {
/* FEC - RMII */
MX25_PAD_FEC_MDC__FEC_MDC,
MX25_PAD_FEC_MDIO__FEC_MDIO,
MX25_PAD_FEC_TDATA0__FEC_TDATA0,
MX25_PAD_FEC_TDATA1__FEC_TDATA1,
MX25_PAD_FEC_TX_EN__FEC_TX_EN,
MX25_PAD_FEC_RDATA0__FEC_RDATA0,
MX25_PAD_FEC_RDATA1__FEC_RDATA1,
MX25_PAD_FEC_RX_DV__FEC_RX_DV,
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
/* I2C1 */
MX25_PAD_I2C1_CLK__I2C1_CLK,
MX25_PAD_I2C1_DAT__I2C1_DAT,
};
static const struct fec_platform_data mx25_fec_pdata __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
static const struct mxc_nand_platform_data
eukrea_cpuimx25_nand_board_info __initconst = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
};
static const struct imxi2c_platform_data
eukrea_cpuimx25_i2c0_data __initconst = {
.bitrate = 100000,
};
static struct i2c_board_info eukrea_cpuimx25_i2c_devices[] = {
{
I2C_BOARD_INFO("pcf8563", 0x51),
},
};
static int eukrea_cpuimx25_otg_init(struct platform_device *pdev)
{
return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_DIFF_UNI);
}
static const struct mxc_usbh_platform_data otg_pdata __initconst = {
.init = eukrea_cpuimx25_otg_init,
.portsc = MXC_EHCI_MODE_UTMI,
};
static int eukrea_cpuimx25_usbh2_init(struct platform_device *pdev)
{
return mx25_initialize_usb_hw(pdev->id, MXC_EHCI_INTERFACE_SINGLE_UNI |
MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN);
}
static const struct mxc_usbh_platform_data usbh2_pdata __initconst = {
.init = eukrea_cpuimx25_usbh2_init,
.portsc = MXC_EHCI_MODE_SERIAL,
};
static const struct fsl_usb2_platform_data otg_device_pdata __initconst = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_UTMI,
.workaround = FLS_USB2_WORKAROUND_ENGCM09152,
};
static bool otg_mode_host __initdata;
static int __init eukrea_cpuimx25_otg_mode(char *options)
{
if (!strcmp(options, "host"))
otg_mode_host = true;
else if (!strcmp(options, "device"))
otg_mode_host = false;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
return 1;
}
__setup("otg_mode=", eukrea_cpuimx25_otg_mode);
static void __init eukrea_cpuimx25_init(void)
{
imx25_soc_init();
if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads,
ARRAY_SIZE(eukrea_cpuimx25_pads)))
printk(KERN_ERR "error setting cpuimx25 pads !\n");
imx25_add_imx_uart0(&uart_pdata);
imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info);
imx25_add_imxdi_rtc();
imx25_add_fec(&mx25_fec_pdata);
imx25_add_imx2_wdt();
i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx25_i2c_devices));
imx25_add_imx_i2c0(&eukrea_cpuimx25_i2c0_data);
if (otg_mode_host)
imx25_add_mxc_ehci_otg(&otg_pdata);
else
imx25_add_fsl_usb2_udc(&otg_device_pdata);
imx25_add_mxc_ehci_hs(&usbh2_pdata);
#ifdef CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD
eukrea_mbimxsd25_baseboard_init();
#endif
}
static void __init eukrea_cpuimx25_timer_init(void)
{
mx25_clocks_init();
}
MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
/* Maintainer: Eukrea Electromatique */
.atag_offset = 0x100,
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
.init_time = eukrea_cpuimx25_timer_init,
.init_machine = eukrea_cpuimx25_init,
.restart = mxc_restart,
MACHINE_END
arch/arm/mach-imx/imx25-dt.c → arch/arm/mach-imx/mach-imx25.c
View file @ d0440c59
......@@ -10,12 +10,29 @@
*/
#include <linux/irq.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include "common.h"
#include "mx25.h"
#include "hardware.h"
static void __init imx25_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX25);
}
static void __init mx25_init_irq(void)
{
struct device_node *np;
void __iomem *avic_base;
np = of_find_compatible_node(NULL, NULL, "fsl,avic");
avic_base = of_iomap(np, 0);
BUG_ON(!avic_base);
mxc_init_irq(avic_base);
}
static const char * const imx25_dt_board_compat[] __initconst = {
"fsl,imx25",
......@@ -23,7 +40,6 @@ static const char * const imx25_dt_board_compat[] __initconst = {
};
DT_MACHINE_START(IMX25_DT, "Freescale i.MX25 (Device Tree Support)")
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
.dt_compat = imx25_dt_board_compat,
......
arch/arm/mach-imx/mach-mx25_3ds.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-imx/mach-mx35_3ds.c
View file @ d0440c59
......@@ -166,7 +166,7 @@ static struct platform_device *devices[] __initdata = {
&mx35pdk_flash,
};
static iomux_v3_cfg_t mx35pdk_pads[] = {
static const iomux_v3_cfg_t mx35pdk_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
......
arch/arm/mach-imx/mach-pcm043.c
View file @ d0440c59
......@@ -129,7 +129,7 @@ static struct platform_device *devices[] __initdata = {
&pcm043_flash,
};
static iomux_v3_cfg_t pcm043_pads[] = {
static const iomux_v3_cfg_t pcm043_pads[] __initconst = {
/* UART1 */
MX35_PAD_CTS1__UART1_CTS,
MX35_PAD_RTS1__UART1_RTS,
......
arch/arm/mach-imx/mach-vpr200.c
View file @ d0440c59
......@@ -161,7 +161,7 @@ static struct i2c_board_info vpr200_i2c_devices[] = {
}
};
static iomux_v3_cfg_t vpr200_pads[] = {
static const iomux_v3_cfg_t vpr200_pads[] __initconst = {
/* UART1 */
MX35_PAD_TXD1__UART1_TXD_MUX,
MX35_PAD_RXD1__UART1_RXD_MUX,
......
arch/arm/mach-imx/mm-imx25.c deleted 100644 → 0
View file @ 38eb1dbb
/*
* Copyright (C) 1999,2000 Arm Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
* Copyright (C) 2002 Shane Nay (shane@minirl.com)
* Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* - add MX31 specific definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/pinctrl/machine.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include "common.h"
#include "devices/devices-common.h"
#include "hardware.h"
#include "iomux-v3.h"
#include "mx25.h"
/*
* This table defines static virtual address mappings for I/O regions.
* These are the mappings common across all MX25 boards.
*/
static struct map_desc mx25_io_desc[] __initdata = {
imx_map_entry(MX25, AVIC, MT_DEVICE_NONSHARED),
imx_map_entry(MX25, AIPS1, MT_DEVICE_NONSHARED),
imx_map_entry(MX25, AIPS2, MT_DEVICE_NONSHARED),
};
/*
* This function initializes the memory map. It is called during the
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
void __init mx25_map_io(void)
{
iotable_init(mx25_io_desc, ARRAY_SIZE(mx25_io_desc));
}
void __init imx25_init_early(void)
{
mxc_set_cpu_type(MXC_CPU_MX25);
mxc_iomux_v3_init(MX25_IO_ADDRESS(MX25_IOMUXC_BASE_ADDR));
}
void __init mx25_init_irq(void)
{
mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR));
}
static struct sdma_platform_data imx25_sdma_pdata __initdata = {
.fw_name = "sdma-imx25.bin",
};
static const struct resource imx25_audmux_res[] __initconst = {
DEFINE_RES_MEM(MX25_AUDMUX_BASE_ADDR, SZ_16K),
};
void __init imx25_soc_init(void)
{
mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR));
mxc_device_init();
/* i.mx25 has the i.mx35 type gpio */
mxc_register_gpio("imx35-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0);
mxc_register_gpio("imx35-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0);
mxc_register_gpio("imx35-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
mxc_register_gpio("imx35-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
pinctrl_provide_dummies();
/* i.mx25 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
/* i.mx25 has the i.mx31 type audmux */
platform_device_register_simple("imx31-audmux", 0, imx25_audmux_res,
ARRAY_SIZE(imx25_audmux_res));
}
arch/arm/mach-imx/mx25.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/Kconfig deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/Makefile deleted 100644 → 0
View file @ 38eb1dbb
obj-$(CONFIG_MSM_PROC_COMM) += clock.o
obj-$(CONFIG_MSM_VIC) += irq-vic.o
obj-$(CONFIG_ARCH_MSM7X00A) += irq.o
obj-$(CONFIG_ARCH_QSD8X50) += sirc.o
obj-$(CONFIG_MSM_PROC_COMM) += proc_comm.o clock-pcom.o vreg.o
obj-$(CONFIG_ARCH_MSM7X00A) += dma.o io.o
obj-$(CONFIG_ARCH_MSM7X30) += dma.o io.o
obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
obj-$(CONFIG_MSM_SMD) += last_radio_log.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
arch/arm/mach-msm/Makefile.boot deleted 100644 → 0
View file @ 38eb1dbb
zreladdr-y += 0x10008000
params_phys-y := 0x10000100
initrd_phys-y := 0x10800000
arch/arm/mach-msm/board-halibut.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/board-msm7x30.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/board-qsd8x50.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/board-sapphire.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/board-trout-gpio.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/board-trout-mmc.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/board-trout-panel.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/board-trout.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/board-trout.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/clock-pcom.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/clock-pcom.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/clock.c deleted 100644 → 0
View file @ 38eb1dbb
/* arch/arm/mach-msm/clock.c
*
* Copyright (C) 2007 Google, Inc.
* Copyright (c) 2007-2012, The Linux Foundation. All rights reserved.
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/clk-provider.h>
#include <linux/module.h>
#include "clock.h"
int clk_reset(struct clk *clk, enum clk_reset_action action)
{
struct clk_hw *hw = __clk_get_hw(clk);
struct msm_clk *m = to_msm_clk(hw);
return m->reset(hw, action);
}
EXPORT_SYMBOL(clk_reset);
arch/arm/mach-msm/clock.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/common.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/devices-msm7x00.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/devices-msm7x30.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/devices-qsd8x50.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/devices.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/dma.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/gpiomux-8x50.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/gpiomux-v1.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/gpiomux.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/gpiomux.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/clk.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/dma.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/entry-macro.S deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/hardware.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/irqs-7x00.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/irqs-7x30.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/irqs-8x50.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/irqs.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/msm_gpiomux.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/msm_iomap-7x00.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/msm_iomap-7x30.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/msm_iomap-8x50.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/msm_iomap.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/msm_smd.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/sirc.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/include/mach/vreg.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/io.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/irq-vic.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/irq.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/last_radio_log.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/proc_comm.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/proc_comm.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/sirc.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/smd.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/smd_debug.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/smd_private.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-msm/vreg.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-mvebu/board-v7.c
View file @ d0440c59
This diff is collapsed.
arch/arm/mach-mvebu/dove.c
View file @ d0440c59
This diff is collapsed.
arch/arm/mach-mvebu/kirkwood.c
View file @ d0440c59
This diff is collapsed.
arch/arm/mach-omap2/Kconfig
View file @ d0440c59
This diff is collapsed.
arch/arm/mach-omap2/Makefile
View file @ d0440c59
This diff is collapsed.
arch/arm/mach-omap2/board-devkit8000.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-omap2/board-omap3stalker.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-omap2/board-omap3touchbook.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-shmobile/Makefile
View file @ d0440c59
This diff is collapsed.
arch/arm/mach-shmobile/common.h
View file @ d0440c59
This diff is collapsed.
arch/arm/mach-shmobile/cpuidle.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-shmobile/pm-r8a7790.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
arch/arm/mach-shmobile/pm-sh7372.c
View file @ d0440c59
This diff is collapsed.
arch/arm/mach-shmobile/r8a7790.h
View file @ d0440c59
This diff is collapsed.
arch/arm/mach-shmobile/r8a7791.h
View file @ d0440c59
This diff is collapsed.
arch/arm/mach-shmobile/rcar-gen2.h
View file @ d0440c59
This diff is collapsed.
arch/arm/mach-shmobile/setup-r8a7740.c
View file @ d0440c59
This diff is collapsed.
arch/arm/mach-shmobile/setup-rcar-gen2.c
View file @ d0440c59
This diff is collapsed.
arch/arm/mach-shmobile/smp-r8a7790.c
View file @ d0440c59
This diff is collapsed.
arch/arm/mach-shmobile/smp-r8a7791.c
View file @ d0440c59
This diff is collapsed.
drivers/gpio/Kconfig
View file @ d0440c59
This diff is collapsed.
drivers/gpio/Makefile
View file @ d0440c59
This diff is collapsed.
drivers/gpio/gpio-msm-v1.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
drivers/mmc/host/Kconfig
View file @ d0440c59
This diff is collapsed.
drivers/mmc/host/Makefile
View file @ d0440c59
This diff is collapsed.
drivers/mmc/host/msm_sdcc.c deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
drivers/mmc/host/msm_sdcc.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
drivers/pcmcia/Kconfig
View file @ d0440c59
This diff is collapsed.
drivers/pcmcia/at91_cf.c
View file @ d0440c59
This diff is collapsed.
include/linux/platform_data/mmc-msm_sdcc.h deleted 100644 → 0
View file @ 38eb1dbb
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7