drm/radeon/dpm: fixup dynamic state adjust for btc (v2)

Use a dedicated copy of the current power state since
we may have to adjust it on the fly.

v2: fix up redundant state sets
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/radeon/btc_dpm.h

@@ -33,4 +33,6 @@
 #define BTC_CGULVPARAMETER_DFLT                       0x00040035
 #define BTC_CGULVCONTROL_DFLT                         0x00001450
 
+extern u32 btc_valid_sclk[];
+
 #endif

drivers/gpu/drm/radeon/cypress_dpm.h

@@ -88,6 +88,7 @@ struct evergreen_power_info {
 	struct at ats[2];
 	/* smc offsets */
 	u16 mc_reg_table_start;
+	struct rv7xx_ps hw_ps;
 };
 
 #define CYPRESS_HASI_DFLT                               400000

drivers/gpu/drm/radeon/radeon.h

@@ -1217,6 +1217,19 @@ struct radeon_dpm_thermal {
 	bool               high_to_low;
 };
 
+enum radeon_clk_action
+{
+	RADEON_SCLK_UP = 1,
+	RADEON_SCLK_DOWN
+};
+
+struct radeon_blacklist_clocks
+{
+	u32 sclk;
+	u32 mclk;
+	enum radeon_clk_action action;
+};
+
 struct radeon_clock_and_voltage_limits {
 	u32 sclk;
 	u32 mclk;

drivers/gpu/drm/radeon/radeon_pm.c

@@ -719,10 +719,14 @@ static void radeon_dpm_change_power_state_locked(struct radeon_device *rdev)
 	else
 		return;
 
-	/* no need to reprogram if nothing changed */
+	/* no need to reprogram if nothing changed unless we are on BTC+ */
 	if (rdev->pm.dpm.current_ps == rdev->pm.dpm.requested_ps) {
-		/* update display watermarks based on new power state */
+		if ((rdev->family < CHIP_BARTS) || (rdev->flags & RADEON_IS_IGP)) {
+			/* for pre-BTC and APUs if the num crtcs changed but state is the same,
+			 * all we need to do is update the display configuration.
+			 */
 			if (rdev->pm.dpm.new_active_crtcs != rdev->pm.dpm.current_active_crtcs) {
+				/* update display watermarks based on new power state */
 				radeon_bandwidth_update(rdev);
 				/* update displays */
 				radeon_dpm_display_configuration_changed(rdev);
@@ -730,6 +734,27 @@ static void radeon_dpm_change_power_state_locked(struct radeon_device *rdev)
 				rdev->pm.dpm.current_active_crtc_count = rdev->pm.dpm.new_active_crtc_count;
 			}
 			return;
+		} else {
+			/* for BTC+ if the num crtcs hasn't changed and state is the same,
+			 * nothing to do, if the num crtcs is > 1 and state is the same,
+			 * update display configuration.
+			 */
+			if (rdev->pm.dpm.new_active_crtcs ==
+			    rdev->pm.dpm.current_active_crtcs) {
+				return;
+			} else {
+				if ((rdev->pm.dpm.current_active_crtc_count > 1) &&
+				    (rdev->pm.dpm.new_active_crtc_count > 1)) {
+					/* update display watermarks based on new power state */
+					radeon_bandwidth_update(rdev);
+					/* update displays */
+					radeon_dpm_display_configuration_changed(rdev);
+					rdev->pm.dpm.current_active_crtcs = rdev->pm.dpm.new_active_crtcs;
+					rdev->pm.dpm.current_active_crtc_count = rdev->pm.dpm.new_active_crtc_count;
+					return;
+				}
+			}
+		}
 	}
 
 	printk("switching from power state:\n");

drivers/gpu/drm/radeon/rv770_dpm.c

@@ -2177,6 +2177,16 @@ static void rv7xx_parse_pplib_clock_info(struct radeon_device *rdev,
 		pl->vddc = vddc;
 		pl->vddci = vddci;
 	}
+
+	if (rdev->family >= CHIP_BARTS) {
+		if ((rps->class & ATOM_PPLIB_CLASSIFICATION_UI_MASK) ==
+		    ATOM_PPLIB_CLASSIFICATION_UI_PERFORMANCE) {
+			rdev->pm.dpm.dyn_state.max_clock_voltage_on_ac.sclk = pl->sclk;
+			rdev->pm.dpm.dyn_state.max_clock_voltage_on_ac.mclk = pl->mclk;
+			rdev->pm.dpm.dyn_state.max_clock_voltage_on_ac.vddc = pl->vddc;
+			rdev->pm.dpm.dyn_state.max_clock_voltage_on_ac.vddci = pl->vddci;
+		}
+	}
 }
 
 int rv7xx_parse_power_table(struct radeon_device *rdev)