Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Minor formatting fix
  amd64_edac: Fix operator precendence error
  edac, mc: Improve scrub rate handling
  amd64_edac: Correct scrub rate setting
  amd64_edac: Fix DCT base address selector
  amd64_edac: Remove polling mechanism
  x86, mce: Notify about corrected events too
  amd64_edac: Remove unneeded defines
  edac: Remove EDAC_DEBUG_VERBOSE
  amd64_edac: Sanitize syndrome extraction

arch/x86/kernel/cpu/mcheck/mce.c

@@ -600,6 +600,7 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 		 */
 		if (!(flags & MCP_DONTLOG) && !mce_dont_log_ce) {
 			mce_log(&m);
+			atomic_notifier_call_chain(&x86_mce_decoder_chain, 0, &m);
 			add_taint(TAINT_MACHINE_CHECK);
 		}
 

drivers/edac/Kconfig

@@ -39,14 +39,6 @@ config EDAC_DEBUG
 	  there're four debug levels (x=0,1,2,3 from low to high).
 	  Usually you should select 'N'.
 
-config EDAC_DEBUG_VERBOSE
-	bool "More verbose debugging"
-	depends on EDAC_DEBUG
-	help
-	  This option makes debugging information more verbose.
-	  Source file name and line number where debugging message
-	  printed will be added to debugging message.
-
  config EDAC_DECODE_MCE
 	tristate "Decode MCEs in human-readable form (only on AMD for now)"
 	depends on CPU_SUP_AMD && X86_MCE

drivers/edac/amd64_edac.c

@@ -160,7 +160,7 @@ static int amd64_search_set_scrub_rate(struct pci_dev *ctl, u32 new_bw,
 	return 0;
 }
 
-static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 *bandwidth)
+static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 bandwidth)
 {
 	struct amd64_pvt *pvt = mci->pvt_info;
 	u32 min_scrubrate = 0x0;
@@ -178,10 +178,10 @@ static int amd64_set_scrub_rate(struct mem_ctl_info *mci, u32 *bandwidth)
 
 	default:
 		amd64_printk(KERN_ERR, "Unsupported family!\n");
-		break;
+		return -EINVAL;
 	}
-	return amd64_search_set_scrub_rate(pvt->misc_f3_ctl, *bandwidth,
-			min_scrubrate);
+	return amd64_search_set_scrub_rate(pvt->misc_f3_ctl, bandwidth,
+					   min_scrubrate);
 }
 
 static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
@@ -796,6 +796,11 @@ static int sys_addr_to_csrow(struct mem_ctl_info *mci, u64 sys_addr)
 
 static int get_channel_from_ecc_syndrome(struct mem_ctl_info *, u16);
 
+static u16 extract_syndrome(struct err_regs *err)
+{
+	return ((err->nbsh >> 15) & 0xff) | ((err->nbsl >> 16) & 0xff00);
+}
+
 static void amd64_cpu_display_info(struct amd64_pvt *pvt)
 {
 	if (boot_cpu_data.x86 == 0x11)
@@ -888,6 +893,9 @@ static void amd64_dump_misc_regs(struct amd64_pvt *pvt)
 		return;
 	}
 
+	amd64_printk(KERN_INFO, "using %s syndromes.\n",
+		     ((pvt->syn_type == 8) ? "x8" : "x4"));
+
 	/* Only if NOT ganged does dclr1 have valid info */
 	if (!dct_ganging_enabled(pvt))
 		amd64_dump_dramcfg_low(pvt->dclr1, 1);
@@ -1101,20 +1109,17 @@ static void k8_read_dram_base_limit(struct amd64_pvt *pvt, int dram)
 }
 
 static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
-					struct err_regs *info,
-					u64 sys_addr)
+				    struct err_regs *err_info, u64 sys_addr)
 {
 	struct mem_ctl_info *src_mci;
-	unsigned short syndrome;
 	int channel, csrow;
 	u32 page, offset;
+	u16 syndrome;
 
-	/* Extract the syndrome parts and form a 16-bit syndrome */
-	syndrome  = HIGH_SYNDROME(info->nbsl) << 8;
-	syndrome |= LOW_SYNDROME(info->nbsh);
+	syndrome = extract_syndrome(err_info);
 
 	/* CHIPKILL enabled */
-	if (info->nbcfg & K8_NBCFG_CHIPKILL) {
+	if (err_info->nbcfg & K8_NBCFG_CHIPKILL) {
 		channel = get_channel_from_ecc_syndrome(mci, syndrome);
 		if (channel < 0) {
 			/*
@@ -1123,8 +1128,8 @@ static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
 			 * as suspect.
 			 */
 			amd64_mc_printk(mci, KERN_WARNING,
-				       "unknown syndrome 0x%x - possible error "
-				       "reporting race\n", syndrome);
+					"unknown syndrome 0x%04x - possible "
+					"error reporting race\n", syndrome);
 			edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR);
 			return;
 		}
@@ -1430,7 +1435,7 @@ static inline u64 f10_get_base_addr_offset(u64 sys_addr, int hi_range_sel,
 	u64 chan_off;
 
 	if (hi_range_sel) {
-		if (!(dct_sel_base_addr & 0xFFFFF800) &&
+		if (!(dct_sel_base_addr & 0xFFFF0000) &&
 		   hole_valid && (sys_addr >= 0x100000000ULL))
 			chan_off = hole_off << 16;
 		else
@@ -1654,13 +1659,13 @@ static int f10_translate_sysaddr_to_cs(struct amd64_pvt *pvt, u64 sys_addr,
  * (MCX_ADDR).
  */
 static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
-				     struct err_regs *info,
+				     struct err_regs *err_info,
 				     u64 sys_addr)
 {
 	struct amd64_pvt *pvt = mci->pvt_info;
 	u32 page, offset;
-	unsigned short syndrome;
 	int nid, csrow, chan = 0;
+	u16 syndrome;
 
 	csrow = f10_translate_sysaddr_to_cs(pvt, sys_addr, &nid, &chan);
 
@@ -1671,15 +1676,14 @@ static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
 
 	error_address_to_page_and_offset(sys_addr, &page, &offset);
 
-	syndrome  = HIGH_SYNDROME(info->nbsl) << 8;
-	syndrome |= LOW_SYNDROME(info->nbsh);
+	syndrome = extract_syndrome(err_info);
 
 	/*
 	 * We need the syndromes for channel detection only when we're
 	 * ganged. Otherwise @chan should already contain the channel at
 	 * this point.
 	 */
-	if (dct_ganging_enabled(pvt) && pvt->nbcfg & K8_NBCFG_CHIPKILL)
+	if (dct_ganging_enabled(pvt) && (pvt->nbcfg & K8_NBCFG_CHIPKILL))
 		chan = get_channel_from_ecc_syndrome(mci, syndrome);
 
 	if (chan >= 0)
@@ -1878,7 +1882,7 @@ static u16 x8_vectors[] = {
 };
 
 static int decode_syndrome(u16 syndrome, u16 *vectors, int num_vecs,
-				 int v_dim)
+			   int v_dim)
 {
 	unsigned int i, err_sym;
 
@@ -1955,124 +1959,23 @@ static int map_err_sym_to_channel(int err_sym, int sym_size)
 static int get_channel_from_ecc_syndrome(struct mem_ctl_info *mci, u16 syndrome)
 {
 	struct amd64_pvt *pvt = mci->pvt_info;
-	u32 value = 0;
-	int err_sym = 0;
-
-	if (boot_cpu_data.x86 == 0x10) {
-
-		amd64_read_pci_cfg(pvt->misc_f3_ctl, 0x180, &value);
-
-		/* F3x180[EccSymbolSize]=1 => x8 symbols */
-		if (boot_cpu_data.x86_model > 7 &&
-		    value & BIT(25)) {
-			err_sym = decode_syndrome(syndrome, x8_vectors,
-						  ARRAY_SIZE(x8_vectors), 8);
-			return map_err_sym_to_channel(err_sym, 8);
-		}
+	int err_sym = -1;
+
+	if (pvt->syn_type == 8)
+		err_sym = decode_syndrome(syndrome, x8_vectors,
+					  ARRAY_SIZE(x8_vectors),
+					  pvt->syn_type);
+	else if (pvt->syn_type == 4)
+		err_sym = decode_syndrome(syndrome, x4_vectors,
+					  ARRAY_SIZE(x4_vectors),
+					  pvt->syn_type);
+	else {
+		amd64_printk(KERN_WARNING, "%s: Illegal syndrome type: %u\n",
+					   __func__, pvt->syn_type);
+		return err_sym;
 	}
-	err_sym = decode_syndrome(syndrome, x4_vectors, ARRAY_SIZE(x4_vectors), 4);
-	return map_err_sym_to_channel(err_sym, 4);
-}
-
-/*
- * Check for valid error in the NB Status High register. If so, proceed to read
- * NB Status Low, NB Address Low and NB Address High registers and store data
- * into error structure.
- *
- * Returns:
- *	- 1: if hardware regs contains valid error info
- *	- 0: if no valid error is indicated
- */
-static int amd64_get_error_info_regs(struct mem_ctl_info *mci,
-				     struct err_regs *regs)
-{
-	struct amd64_pvt *pvt;
-	struct pci_dev *misc_f3_ctl;
-
-	pvt = mci->pvt_info;
-	misc_f3_ctl = pvt->misc_f3_ctl;
-
-	if (amd64_read_pci_cfg(misc_f3_ctl, K8_NBSH, &regs->nbsh))
-		return 0;
-
-	if (!(regs->nbsh & K8_NBSH_VALID_BIT))
-		return 0;
-
-	/* valid error, read remaining error information registers */
-	if (amd64_read_pci_cfg(misc_f3_ctl, K8_NBSL, &regs->nbsl) ||
-	    amd64_read_pci_cfg(misc_f3_ctl, K8_NBEAL, &regs->nbeal) ||
-	    amd64_read_pci_cfg(misc_f3_ctl, K8_NBEAH, &regs->nbeah) ||
-	    amd64_read_pci_cfg(misc_f3_ctl, K8_NBCFG, &regs->nbcfg))
-		return 0;
-
-	return 1;
-}
-
-/*
- * This function is called to retrieve the error data from hardware and store it
- * in the info structure.
- *
- * Returns:
- *	- 1: if a valid error is found
- *	- 0: if no error is found
- */
-static int amd64_get_error_info(struct mem_ctl_info *mci,
-				struct err_regs *info)
-{
-	struct amd64_pvt *pvt;
-	struct err_regs regs;
-
-	pvt = mci->pvt_info;
-
-	if (!amd64_get_error_info_regs(mci, info))
-		return 0;
-
-	/*
-	 * Here's the problem with the K8's EDAC reporting: There are four
-	 * registers which report pieces of error information. They are shared
-	 * between CEs and UEs. Furthermore, contrary to what is stated in the
-	 * BKDG, the overflow bit is never used! Every error always updates the
-	 * reporting registers.
-	 *
-	 * Can you see the race condition? All four error reporting registers
-	 * must be read before a new error updates them! There is no way to read
-	 * all four registers atomically. The best than can be done is to detect
-	 * that a race has occured and then report the error without any kind of
-	 * precision.
-	 *
-	 * What is still positive is that errors are still reported and thus
-	 * problems can still be detected - just not localized because the
-	 * syndrome and address are spread out across registers.
-	 *
-	 * Grrrrr!!!!!  Here's hoping that AMD fixes this in some future K8 rev.
-	 * UEs and CEs should have separate register sets with proper overflow
-	 * bits that are used! At very least the problem can be fixed by
-	 * honoring the ErrValid bit in 'nbsh' and not updating registers - just
-	 * set the overflow bit - unless the current error is CE and the new
-	 * error is UE which would be the only situation for overwriting the
-	 * current values.
-	 */
-
-	regs = *info;
-
-	/* Use info from the second read - most current */
-	if (unlikely(!amd64_get_error_info_regs(mci, info)))
-		return 0;
 
-	/* clear the error bits in hardware */
-	pci_write_bits32(pvt->misc_f3_ctl, K8_NBSH, 0, K8_NBSH_VALID_BIT);
-
-	/* Check for the possible race condition */
-	if ((regs.nbsh != info->nbsh) ||
-	     (regs.nbsl != info->nbsl) ||
-	     (regs.nbeah != info->nbeah) ||
-	     (regs.nbeal != info->nbeal)) {
-		amd64_mc_printk(mci, KERN_WARNING,
-				"hardware STATUS read access race condition "
-				"detected!\n");
-		return 0;
-	}
-	return 1;
+	return map_err_sym_to_channel(err_sym, pvt->syn_type);
 }
 
 /*
@@ -2177,7 +2080,7 @@ static inline void __amd64_decode_bus_error(struct mem_ctl_info *mci,
 	 * catastrophic.
 	 */
 	if (info->nbsh & K8_NBSH_OVERFLOW)
-		edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR "Error Overflow");
+		edac_mc_handle_ce_no_info(mci, EDAC_MOD_STR " Error Overflow");
 }
 
 void amd64_decode_bus_error(int node_id, struct err_regs *regs)
@@ -2198,20 +2101,6 @@ void amd64_decode_bus_error(int node_id, struct err_regs *regs)
 
 }
 
-/*
- * The main polling 'check' function, called FROM the edac core to perform the
- * error checking and if an error is encountered, error processing.
- */
-static void amd64_check(struct mem_ctl_info *mci)
-{
-	struct err_regs regs;
-
-	if (amd64_get_error_info(mci, &regs)) {
-		struct amd64_pvt *pvt = mci->pvt_info;
-		amd_decode_nb_mce(pvt->mc_node_id, &regs, 1);
-	}
-}
-
 /*
  * Input:
  *	1) struct amd64_pvt which contains pvt->dram_f2_ctl pointer
@@ -2284,6 +2173,7 @@ static void amd64_free_mc_sibling_devices(struct amd64_pvt *pvt)
 static void amd64_read_mc_registers(struct amd64_pvt *pvt)
 {
 	u64 msr_val;
+	u32 tmp;
 	int dram;
 
 	/*
@@ -2349,10 +2239,22 @@ static void amd64_read_mc_registers(struct amd64_pvt *pvt)
 	amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_0, &pvt->dclr0);
 	amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_0, &pvt->dchr0);
 
-	if (!dct_ganging_enabled(pvt) && boot_cpu_data.x86 >= 0x10) {
-		amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1);
-		amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_1, &pvt->dchr1);
+	if (boot_cpu_data.x86 >= 0x10) {
+		if (!dct_ganging_enabled(pvt)) {
+			amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCLR_1, &pvt->dclr1);
+			amd64_read_pci_cfg(pvt->dram_f2_ctl, F10_DCHR_1, &pvt->dchr1);
+		}
+		amd64_read_pci_cfg(pvt->misc_f3_ctl, EXT_NB_MCA_CFG, &tmp);
 	}
+
+	if (boot_cpu_data.x86 == 0x10 &&
+	    boot_cpu_data.x86_model > 7 &&
+	    /* F3x180[EccSymbolSize]=1 => x8 symbols */
+	    tmp & BIT(25))
+		pvt->syn_type = 8;
+	else
+		pvt->syn_type = 4;
+
 	amd64_dump_misc_regs(pvt);
 }
 
@@ -2739,9 +2641,6 @@ static void amd64_setup_mci_misc_attributes(struct mem_ctl_info *mci)
 	mci->dev_name		= pci_name(pvt->dram_f2_ctl);
 	mci->ctl_page_to_phys	= NULL;
 
-	/* IMPORTANT: Set the polling 'check' function in this module */
-	mci->edac_check		= amd64_check;
-
 	/* memory scrubber interface */
 	mci->set_sdram_scrub_rate = amd64_set_scrub_rate;
 	mci->get_sdram_scrub_rate = amd64_get_scrub_rate;

drivers/edac/amd64_edac.h

@@ -244,44 +244,17 @@
 
 
 #define F10_DCTL_SEL_LOW		0x110
-
-#define dct_sel_baseaddr(pvt)    \
-	((pvt->dram_ctl_select_low) & 0xFFFFF800)
-
-#define dct_sel_interleave_addr(pvt)    \
-	(((pvt->dram_ctl_select_low) >> 6) & 0x3)
-
-enum {
-	F10_DCTL_SEL_LOW_DctSelHiRngEn	= BIT(0),
-	F10_DCTL_SEL_LOW_DctSelIntLvEn	= BIT(2),
-	F10_DCTL_SEL_LOW_DctGangEn	= BIT(4),
-	F10_DCTL_SEL_LOW_DctDatIntLv	= BIT(5),
-	F10_DCTL_SEL_LOW_DramEnable	= BIT(8),
-	F10_DCTL_SEL_LOW_MemCleared	= BIT(10),
-};
-
-#define    dct_high_range_enabled(pvt)    \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelHiRngEn)
-
-#define dct_interleave_enabled(pvt)	   \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelIntLvEn)
-
-#define dct_ganging_enabled(pvt)        \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctGangEn)
-
-#define dct_data_intlv_enabled(pvt)    \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctDatIntLv)
-
-#define dct_dram_enabled(pvt)    \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DramEnable)
-
-#define dct_memory_cleared(pvt)    \
-	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_MemCleared)
-
+#define dct_sel_baseaddr(pvt)		((pvt->dram_ctl_select_low) & 0xFFFFF800)
+#define dct_sel_interleave_addr(pvt)	(((pvt->dram_ctl_select_low) >> 6) & 0x3)
+#define dct_high_range_enabled(pvt)	(pvt->dram_ctl_select_low & BIT(0))
+#define dct_interleave_enabled(pvt)	(pvt->dram_ctl_select_low & BIT(2))
+#define dct_ganging_enabled(pvt)	(pvt->dram_ctl_select_low & BIT(4))
+#define dct_data_intlv_enabled(pvt)	(pvt->dram_ctl_select_low & BIT(5))
+#define dct_dram_enabled(pvt)		(pvt->dram_ctl_select_low & BIT(8))
+#define dct_memory_cleared(pvt)		(pvt->dram_ctl_select_low & BIT(10))
 
 #define F10_DCTL_SEL_HIGH		0x114
 
-
 /*
  * Function 3 - Misc Control
  */
@@ -382,6 +355,8 @@ enum {
 #define K8_NBCAP_SECDED			BIT(3)
 #define K8_NBCAP_DCT_DUAL		BIT(0)
 
+#define EXT_NB_MCA_CFG			0x180
+
 /* MSRs */
 #define K8_MSR_MCGCTL_NBE		BIT(4)
 
@@ -471,6 +446,9 @@ struct amd64_pvt {
 	u32 dram_ctl_select_high;	/* DRAM Controller Select High Reg */
 	u32 online_spare;               /* On-Line spare Reg */
 
+	/* x4 or x8 syndromes in use */
+	u8 syn_type;
+
 	/* temp storage for when input is received from sysfs */
 	struct err_regs ctl_error_info;
 

drivers/edac/e752x_edac.c

@@ -958,7 +958,7 @@ static void e752x_check(struct mem_ctl_info *mci)
 }
 
 /* Program byte/sec bandwidth scrub rate to hardware */
-static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *new_bw)
+static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 new_bw)
 {
 	const struct scrubrate *scrubrates;
 	struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info;
@@ -975,7 +975,7 @@ static int set_sdram_scrub_rate(struct mem_ctl_info *mci, u32 *new_bw)
 	 * desired rate and program the cooresponding register value.
 	 */
 	for (i = 0; scrubrates[i].bandwidth != SDRATE_EOT; i++)
-		if (scrubrates[i].bandwidth >= *new_bw)
+		if (scrubrates[i].bandwidth >= new_bw)
 			break;
 
 	if (scrubrates[i].bandwidth == SDRATE_EOT)

drivers/edac/edac_core.h

@@ -49,21 +49,15 @@
 #define edac_printk(level, prefix, fmt, arg...) \
 	printk(level "EDAC " prefix ": " fmt, ##arg)
 
-#define edac_printk_verbose(level, prefix, fmt, arg...) \
-	printk(level "EDAC " prefix ": " "in %s, line at %d: " fmt,	\
-	       __FILE__, __LINE__, ##arg)
-
 #define edac_mc_printk(mci, level, fmt, arg...) \
 	printk(level "EDAC MC%d: " fmt, mci->mc_idx, ##arg)
 
 #define edac_mc_chipset_printk(mci, level, prefix, fmt, arg...) \
 	printk(level "EDAC " prefix " MC%d: " fmt, mci->mc_idx, ##arg)
 
-/* edac_device printk */
 #define edac_device_printk(ctl, level, fmt, arg...) \
 	printk(level "EDAC DEVICE%d: " fmt, ctl->dev_idx, ##arg)
 
-/* edac_pci printk */
 #define edac_pci_printk(ctl, level, fmt, arg...) \
 	printk(level "EDAC PCI%d: " fmt, ctl->pci_idx, ##arg)
 
@@ -76,21 +70,12 @@
 extern int edac_debug_level;
 extern const char *edac_mem_types[];
 
-#ifndef CONFIG_EDAC_DEBUG_VERBOSE
 #define edac_debug_printk(level, fmt, arg...)                           \
 	do {                                                            \
 		if (level <= edac_debug_level)                          \
 			edac_printk(KERN_DEBUG, EDAC_DEBUG,		\
 				    "%s: " fmt, __func__, ##arg);	\
 	} while (0)
-#else  /* CONFIG_EDAC_DEBUG_VERBOSE */
-#define edac_debug_printk(level, fmt, arg...)                            \
-	do {                                                             \
-		if (level <= edac_debug_level)                           \
-			edac_printk_verbose(KERN_DEBUG, EDAC_DEBUG, fmt, \
-					    ##arg);			\
-	} while (0)
-#endif
 
 #define debugf0( ... ) edac_debug_printk(0, __VA_ARGS__ )
 #define debugf1( ... ) edac_debug_printk(1, __VA_ARGS__ )
@@ -393,7 +378,7 @@ struct mem_ctl_info {
 	   internal representation and configures whatever else needs
 	   to be configured.
 	 */
-	int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 * bw);
+	int (*set_sdram_scrub_rate) (struct mem_ctl_info * mci, u32 bw);
 
 	/* Get the current sdram memory scrub rate from the internal
 	   representation and converts it to the closest matching

drivers/edac/edac_mc_sysfs.c

@@ -124,19 +124,6 @@ static const char *edac_caps[] = {
 	[EDAC_S16ECD16ED] = "S16ECD16ED"
 };
 
-
-
-static ssize_t memctrl_int_store(void *ptr, const char *buffer, size_t count)
-{
-	int *value = (int *)ptr;
-
-	if (isdigit(*buffer))
-		*value = simple_strtoul(buffer, NULL, 0);
-
-	return count;
-}
-
-
 /* EDAC sysfs CSROW data structures and methods
  */
 
@@ -450,53 +437,54 @@ static ssize_t mci_reset_counters_store(struct mem_ctl_info *mci,
 
 /* memory scrubbing */
 static ssize_t mci_sdram_scrub_rate_store(struct mem_ctl_info *mci,
-					const char *data, size_t count)
+					  const char *data, size_t count)
 {
-	u32 bandwidth = -1;
+	unsigned long bandwidth = 0;
+	int err;
 
-	if (mci->set_sdram_scrub_rate) {
+	if (!mci->set_sdram_scrub_rate) {
+		edac_printk(KERN_WARNING, EDAC_MC,
+			    "Memory scrub rate setting not implemented!\n");
+		return -EINVAL;
+	}
 
-		memctrl_int_store(&bandwidth, data, count);
+	if (strict_strtoul(data, 10, &bandwidth) < 0)
+		return -EINVAL;
 
-		if (!(*mci->set_sdram_scrub_rate) (mci, &bandwidth)) {
-			edac_printk(KERN_DEBUG, EDAC_MC,
-				"Scrub rate set successfully, applied: %d\n",
-				bandwidth);
-		} else {
-			/* FIXME: error codes maybe? */
-			edac_printk(KERN_DEBUG, EDAC_MC,
-				"Scrub rate set FAILED, could not apply: %d\n",
-				bandwidth);
-		}
-	} else {
-		/* FIXME: produce "not implemented" ERROR for user-side. */
-		edac_printk(KERN_WARNING, EDAC_MC,
-			"Memory scrubbing 'set'control is not implemented!\n");
+	err = mci->set_sdram_scrub_rate(mci, (u32)bandwidth);
+	if (err) {
+		edac_printk(KERN_DEBUG, EDAC_MC,
+			    "Failed setting scrub rate to %lu\n", bandwidth);
+		return -EINVAL;
+	}
+	else {
+		edac_printk(KERN_DEBUG, EDAC_MC,
+			    "Scrub rate set to: %lu\n", bandwidth);
+		return count;
 	}
-	return count;
 }
 
 static ssize_t mci_sdram_scrub_rate_show(struct mem_ctl_info *mci, char *data)
 {
-	u32 bandwidth = -1;
-
-	if (mci->get_sdram_scrub_rate) {
-		if (!(*mci->get_sdram_scrub_rate) (mci, &bandwidth)) {
-			edac_printk(KERN_DEBUG, EDAC_MC,
-				"Scrub rate successfully, fetched: %d\n",
-				bandwidth);
-		} else {
-			/* FIXME: error codes maybe? */
-			edac_printk(KERN_DEBUG, EDAC_MC,
-				"Scrub rate fetch FAILED, got: %d\n",
-				bandwidth);
-		}
-	} else {
-		/* FIXME: produce "not implemented" ERROR for user-side.  */
+	u32 bandwidth = 0;
+	int err;
+
+	if (!mci->get_sdram_scrub_rate) {
 		edac_printk(KERN_WARNING, EDAC_MC,
-			"Memory scrubbing 'get' control is not implemented\n");
+			    "Memory scrub rate reading not implemented\n");
+		return -EINVAL;
+	}
+
+	err = mci->get_sdram_scrub_rate(mci, &bandwidth);
+	if (err) {
+		edac_printk(KERN_DEBUG, EDAC_MC, "Error reading scrub rate\n");
+		return err;
+	}
+	else {
+		edac_printk(KERN_DEBUG, EDAC_MC,
+			    "Read scrub rate: %d\n", bandwidth);
+		return sprintf(data, "%d\n", bandwidth);
 	}
-	return sprintf(data, "%d\n", bandwidth);
 }
 
 /* default attribute files for the MCI object */

drivers/edac/edac_mce_amd.c

@@ -133,7 +133,7 @@ static void amd_decode_dc_mce(u64 mc0_status)
 	u32 ec  = mc0_status & 0xffff;
 	u32 xec = (mc0_status >> 16) & 0xf;
 
-	pr_emerg(" Data Cache Error");
+	pr_emerg("Data Cache Error");
 
 	if (xec == 1 && TLB_ERROR(ec))
 		pr_cont(": %s TLB multimatch.\n", LL_MSG(ec));
@@ -176,7 +176,7 @@ static void amd_decode_ic_mce(u64 mc1_status)
 	u32 ec  = mc1_status & 0xffff;
 	u32 xec = (mc1_status >> 16) & 0xf;
 
-	pr_emerg(" Instruction Cache Error");
+	pr_emerg("Instruction Cache Error");
 
 	if (xec == 1 && TLB_ERROR(ec))
 		pr_cont(": %s TLB multimatch.\n", LL_MSG(ec));
@@ -233,7 +233,7 @@ static void amd_decode_bu_mce(u64 mc2_status)
 	u32 ec = mc2_status & 0xffff;
 	u32 xec = (mc2_status >> 16) & 0xf;
 
-	pr_emerg(" Bus Unit Error");
+	pr_emerg("Bus Unit Error");
 
 	if (xec == 0x1)
 		pr_cont(" in the write data buffers.\n");
@@ -275,7 +275,7 @@ static void amd_decode_ls_mce(u64 mc3_status)
 	u32 ec  = mc3_status & 0xffff;
 	u32 xec = (mc3_status >> 16) & 0xf;
 
-	pr_emerg(" Load Store Error");
+	pr_emerg("Load Store Error");
 
 	if (xec == 0x0) {
 		u8 rrrr = (ec >> 4) & 0xf;
@@ -304,7 +304,7 @@ void amd_decode_nb_mce(int node_id, struct err_regs *regs, int handle_errors)
 	if (TLB_ERROR(ec) && !report_gart_errors)
 		return;
 
-	pr_emerg(" Northbridge Error, node %d", node_id);
+	pr_emerg("Northbridge Error, node %d", node_id);
 
 	/*
 	 * F10h, revD can disable ErrCpu[3:0] so check that first and also the
@@ -342,13 +342,13 @@ static void amd_decode_fr_mce(u64 mc5_status)
 static inline void amd_decode_err_code(unsigned int ec)
 {
 	if (TLB_ERROR(ec)) {
-		pr_emerg(" Transaction: %s, Cache Level %s\n",
+		pr_emerg("Transaction: %s, Cache Level %s\n",
 			 TT_MSG(ec), LL_MSG(ec));
 	} else if (MEM_ERROR(ec)) {
-		pr_emerg(" Transaction: %s, Type: %s, Cache Level: %s",
+		pr_emerg("Transaction: %s, Type: %s, Cache Level: %s",
 			 RRRR_MSG(ec), TT_MSG(ec), LL_MSG(ec));
 	} else if (BUS_ERROR(ec)) {
-		pr_emerg(" Transaction type: %s(%s), %s, Cache Level: %s, "
+		pr_emerg("Transaction type: %s(%s), %s, Cache Level: %s, "
 			 "Participating Processor: %s\n",
 			  RRRR_MSG(ec), II_MSG(ec), TO_MSG(ec), LL_MSG(ec),
 			  PP_MSG(ec));

drivers/edac/i5100_edac.c

@@ -589,14 +589,13 @@ static void i5100_refresh_scrubbing(struct work_struct *work)
 /*
  * The bandwidth is based on experimentation, feel free to refine it.
  */
-static int i5100_set_scrub_rate(struct mem_ctl_info *mci,
-				       u32 *bandwidth)
+static int i5100_set_scrub_rate(struct mem_ctl_info *mci, u32 bandwidth)
 {
 	struct i5100_priv *priv = mci->pvt_info;
 	u32 dw;
 
 	pci_read_config_dword(priv->mc, I5100_MC, &dw);
-	if (*bandwidth) {
+	if (bandwidth) {
 		priv->scrub_enable = 1;
 		dw |= I5100_MC_SCRBEN_MASK;
 		schedule_delayed_work(&(priv->i5100_scrubbing),
@@ -610,7 +609,7 @@ static int i5100_set_scrub_rate(struct mem_ctl_info *mci,
 
 	pci_read_config_dword(priv->mc, I5100_MC, &dw);
 
-	*bandwidth = 5900000 * i5100_mc_scrben(dw);
+	bandwidth = 5900000 * i5100_mc_scrben(dw);
 
 	return 0;
 }