Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-06-04

This series contains a smorgasbord of updates to documentation, e1000e,
igb, ixgbe, ixgbevf and i40e.

Benjamin Poirier fixes a potential kernel crash due to NULL pointer
dereference in e1000e.

Jeff updates the kernel documentation for e100 and e1000 to correct
default values and URLs which were incorrect in the documentation.  Also
took the time to update these to the new reStructured text format for
kernel documentation.

Joanna Yurdal fixes a missing PTP transmit timestamp by ensuring that
TSICR gets cleared when ICR is cleared.

Sergey updates igb to reset all the transmit queues at one time so that
we only have to wait once for all the queues to be reset.

Alex fixes ixgbevf so that malicious driver detection (MDD) can co-exist
with XDP.

Emil and Tony extend the RTNL lock to ensure we get the most up-to-date
values for the bits and avoid a possible race condition when going down.

YueHaibing from Huawei introduces a helper function in ixgbe for
operation reads to simplify the code a bit more.

Daniel Borkmann adds support for XDP meta data when using build SKB
for i40e.

Shannon Nelson provides twp fixes for the IPSec code in ixgbe, first is
to make sure we do not try to offload the decryption of any incoming
packet that is destined for the management engine.  The other fix is to
resolve a cast problem introduced by a sparse cleanup patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/networking/e100.txt → Documentation/networking/e100.rst

 Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
 ==============================================================
 
-March 15, 2011
+June 1, 2018
 
 Contents
 ========
@@ -36,16 +36,9 @@ Channel Bonding documentation can be found in the Linux kernel source:
 Identifying Your Adapter
 ========================
 
-For more information on how to identify your adapter, go to the Adapter &
-Driver ID Guide at:
-
-  http://support.intel.com/support/network/adapter/pro100/21397.htm
-
-For the latest Intel network drivers for Linux, refer to the following
-website. In the search field, enter your adapter name or type, or use the
-networking link on the left to search for your adapter:
-
-  http://downloadfinder.intel.com/scripts-df/support_intel.asp
+For information on how to identify your adapter, and for the latest Intel
+network drivers, refer to the Intel Support website:
+http://www.intel.com/support
 
 Driver Configuration Parameters
 ===============================
@@ -57,22 +50,26 @@ Rx Descriptors: Number of receive descriptors. A receive descriptor is a data
    structure that describes a receive buffer and its attributes to the network
    controller. The data in the descriptor is used by the controller to write
    data from the controller to host memory. In the 3.x.x driver the valid range
-   for this parameter is 64-256. The default value is 64. This parameter can be
-   changed using the command:
+   for this parameter is 64-256. The default value is 256. This parameter can be
+   changed using the command::
 
-   ethtool -G eth? rx n, where n is the number of desired rx descriptors.
+   ethtool -G eth? rx n
+
+   Where n is the number of desired Rx descriptors.
 
 Tx Descriptors: Number of transmit descriptors. A transmit descriptor is a data
    structure that describes a transmit buffer and its attributes to the network
    controller. The data in the descriptor is used by the controller to read
    data from the host memory to the controller. In the 3.x.x driver the valid
-   range for this parameter is 64-256. The default value is 64. This parameter
-   can be changed using the command:
+   range for this parameter is 64-256. The default value is 128. This parameter
+   can be changed using the command::
+
+   ethtool -G eth? tx n
 
-   ethtool -G eth? tx n, where n is the number of desired tx descriptors.
+   Where n is the number of desired Tx descriptors.
 
 Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by
-   default. The ethtool utility can be used as follows to force speed/duplex.
+   default. The ethtool utility can be used as follows to force speed/duplex.::
 
    ethtool -s eth?  autoneg off speed {10|100} duplex {full|half}
 
@@ -81,7 +78,7 @@ Speed/Duplex: The driver auto-negotiates the link speed and duplex settings by
 
 Event Log Message Level:  The driver uses the message level flag to log events
    to syslog. The message level can be set at driver load time. It can also be
-   set using the command:
+   set using the command::
 
    ethtool -s eth? msglvl n
 
@@ -112,9 +109,9 @@ Additional Configurations
   ---------------------
   In order to see link messages and other Intel driver information on your
   console, you must set the dmesg level up to six. This can be done by
-  entering the following on the command line before loading the e100 driver:
+  entering the following on the command line before loading the e100 driver::
 
-       dmesg -n 8
+       dmesg -n 6
 
   If you wish to see all messages issued by the driver, including debug
   messages, set the dmesg level to eight.
@@ -146,7 +143,8 @@ Additional Configurations
 
   NAPI (Rx polling mode) is supported in the e100 driver.
 
-  See www.cyberus.ca/~hadi/usenix-paper.tgz for more information on NAPI.
+  See https://wiki.linuxfoundation.org/networking/napi for more information
+  on NAPI.
 
   Multiple Interfaces on Same Ethernet Broadcast Network
   ------------------------------------------------------
@@ -160,7 +158,7 @@ Additional Configurations
   If you have multiple interfaces in a server, either turn on ARP
   filtering by
 
-  (1) entering: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
+  (1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
       (this only works if your kernel's version is higher than 2.4.5), or
 
   (2) installing the interfaces in separate broadcast domains (either
@@ -169,15 +167,11 @@ Additional Configurations
 
 Support
 =======
-
 For general information, go to the Intel support website at:
+http://www.intel.com/support/
 
-    http://support.intel.com
-
-    or the Intel Wired Networking project hosted by Sourceforge at:
-
-    http://sourceforge.net/projects/e1000
-
-If an issue is identified with the released source code on the supported
-kernel with a supported adapter, email the specific information related to the
-issue to e1000-devel@lists.sourceforge.net.
+or the Intel Wired Networking project hosted by Sourceforge at:
+http://sourceforge.net/projects/e1000
+If an issue is identified with the released source code on a supported kernel
+with a supported adapter, email the specific information related to the issue
+to e1000-devel@lists.sf.net.

Documentation/networking/e1000.txt → Documentation/networking/e1000.rst

@@ -154,7 +154,7 @@ NOTE:  When e1000 is loaded with default settings and multiple adapters
        are in use simultaneously, the CPU utilization may increase non-
        linearly.  In order to limit the CPU utilization without impacting
        the overall throughput, we recommend that you load the driver as
-       follows:
+       follows::
 
            modprobe e1000 InterruptThrottleRate=3000,3000,3000
 
@@ -167,8 +167,8 @@ NOTE:  When e1000 is loaded with default settings and multiple adapters
 
 RxDescriptors
 -------------
-Valid Range:   80-256 for 82542 and 82543-based adapters
-               80-4096 for all other supported adapters
+Valid Range:   48-256 for 82542 and 82543-based adapters
+               48-4096 for all other supported adapters
 Default Value: 256
 
 This value specifies the number of receive buffer descriptors allocated
@@ -230,8 +230,8 @@ speed.  Duplex should also be set when Speed is set to either 10 or 100.
 
 TxDescriptors
 -------------
-Valid Range:   80-256 for 82542 and 82543-based adapters
-               80-4096 for all other supported adapters
+Valid Range:   48-256 for 82542 and 82543-based adapters
+               48-4096 for all other supported adapters
 Default Value: 256
 
 This value is the number of transmit descriptors allocated by the driver.
@@ -242,41 +242,10 @@ NOTE:  Depending on the available system resources, the request for a
        higher number of transmit descriptors may be denied.  In this case,
        use a lower number.
 
-TxDescriptorStep
-----------------
-Valid Range:    1 (use every Tx Descriptor)
-                4 (use every 4th Tx Descriptor)
-
-Default Value:  1 (use every Tx Descriptor)
-
-On certain non-Intel architectures, it has been observed that intense TX
-traffic bursts of short packets may result in an improper descriptor
-writeback. If this occurs, the driver will report a "TX Timeout" and reset
-the adapter, after which the transmit flow will restart, though data may
-have stalled for as much as 10 seconds before it resumes.
-
-The improper writeback does not occur on the first descriptor in a system
-memory cache-line, which is typically 32 bytes, or 4 descriptors long.
-
-Setting TxDescriptorStep to a value of 4 will ensure that all TX descriptors
-are aligned to the start of a system memory cache line, and so this problem
-will not occur.
-
-NOTES: Setting TxDescriptorStep to 4 effectively reduces the number of
-       TxDescriptors available for transmits to 1/4 of the normal allocation.
-       This has a possible negative performance impact, which may be
-       compensated for by allocating more descriptors using the TxDescriptors
-       module parameter.
-
-       There are other conditions which may result in "TX Timeout", which will
-       not be resolved by the use of the TxDescriptorStep parameter. As the
-       issue addressed by this parameter has never been observed on Intel
-       Architecture platforms, it should not be used on Intel platforms.
-
 TxIntDelay
 ----------
 Valid Range:   0-65535 (0=off)
-Default Value: 64
+Default Value: 8
 
 This value delays the generation of transmit interrupts in units of
 1.024 microseconds.  Transmit interrupt reduction can improve CPU
@@ -288,7 +257,7 @@ TxAbsIntDelay
 -------------
 (This parameter is supported only on 82540, 82545 and later adapters.)
 Valid Range:   0-65535 (0=off)
-Default Value: 64
+Default Value: 32
 
 This value, in units of 1.024 microseconds, limits the delay in which a
 transmit interrupt is generated.  Useful only if TxIntDelay is non-zero,
@@ -310,7 +279,7 @@ Copybreak
 ---------
 Valid Range:   0-xxxxxxx (0=off)
 Default Value: 256
-Usage: insmod e1000.ko copybreak=128
+Usage: modprobe e1000.ko copybreak=128
 
 Driver copies all packets below or equaling this size to a fresh RX
 buffer before handing it up the stack.
@@ -328,14 +297,6 @@ Default Value:  0 (disabled)
 Allows PHY to turn off in lower power states. The user can turn off
 this parameter in supported chipsets.
 
-KumeranLockLoss
----------------
-Valid Range: 0-1
-Default Value: 1 (enabled)
-
-This workaround skips resetting the PHY at shutdown for the initial
-silicon releases of ICH8 systems.
-
 Speed and Duplex Configuration
 ==============================
 
@@ -397,12 +358,12 @@ Additional Configurations
   ------------
   Jumbo Frames support is enabled by changing the MTU to a value larger than
   the default of 1500.  Use the ifconfig command to increase the MTU size.
-  For example:
+  For example::
 
        ifconfig eth<x> mtu 9000 up
 
   This setting is not saved across reboots.  It can be made permanent if
-  you add:
+  you add::
 
        MTU=9000
 

Documentation/networking/index.rst

@@ -10,6 +10,8 @@ Contents:
    batman-adv
    can
    dpaa2/index
+   e100
+   e1000
    kapi
    z8530book
    msg_zerocopy

MAINTAINERS

@@ -7089,8 +7089,8 @@ Q:	http://patchwork.ozlabs.org/project/intel-wired-lan/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue.git
 S:	Supported
-F:	Documentation/networking/e100.txt
-F:	Documentation/networking/e1000.txt
+F:	Documentation/networking/e100.rst
+F:	Documentation/networking/e1000.rst
 F:	Documentation/networking/e1000e.txt
 F:	Documentation/networking/igb.txt
 F:	Documentation/networking/igbvf.txt

drivers/net/ethernet/intel/e1000e/netdev.c

@@ -3527,15 +3527,12 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca)
 		}
 		break;
 	case e1000_pch_spt:
-		if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
 		/* Stable 24MHz frequency */
 		incperiod = INCPERIOD_24MHZ;
 		incvalue = INCVALUE_24MHZ;
 		shift = INCVALUE_SHIFT_24MHZ;
 		adapter->cc.shift = shift;
 		break;
-		}
-		return -EINVAL;
 	case e1000_pch_cnp:
 		if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI) {
 			/* Stable 24MHz frequency */

drivers/net/ethernet/intel/i40e/i40e_txrx.c

@@ -2032,6 +2032,21 @@ static struct sk_buff *i40e_construct_skb(struct i40e_ring *rx_ring,
 #if L1_CACHE_BYTES < 128
 	prefetch(xdp->data + L1_CACHE_BYTES);
 #endif
+	/* Note, we get here by enabling legacy-rx via:
+	 *
+	 *    ethtool --set-priv-flags <dev> legacy-rx on
+	 *
+	 * In this mode, we currently get 0 extra XDP headroom as
+	 * opposed to having legacy-rx off, where we process XDP
+	 * packets going to stack via i40e_build_skb(). The latter
+	 * provides us currently with 192 bytes of headroom.
+	 *
+	 * For i40e_construct_skb() mode it means that the
+	 * xdp->data_meta will always point to xdp->data, since
+	 * the helper cannot expand the head. Should this ever
+	 * change in future for legacy-rx mode on, then lets also
+	 * add xdp->data_meta handling here.
+	 */
 
 	/* allocate a skb to store the frags */
 	skb = __napi_alloc_skb(&rx_ring->q_vector->napi,
@@ -2083,19 +2098,25 @@ static struct sk_buff *i40e_build_skb(struct i40e_ring *rx_ring,
 				      struct i40e_rx_buffer *rx_buffer,
 				      struct xdp_buff *xdp)
 {
-	unsigned int size = xdp->data_end - xdp->data;
+	unsigned int metasize = xdp->data - xdp->data_meta;
 #if (PAGE_SIZE < 8192)
 	unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2;
 #else
 	unsigned int truesize = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) +
-				SKB_DATA_ALIGN(I40E_SKB_PAD + size);
+				SKB_DATA_ALIGN(I40E_SKB_PAD +
+					       (xdp->data_end -
+						xdp->data_hard_start));
 #endif
 	struct sk_buff *skb;
 
-	/* prefetch first cache line of first page */
-	prefetch(xdp->data);
+	/* Prefetch first cache line of first page. If xdp->data_meta
+	 * is unused, this points exactly as xdp->data, otherwise we
+	 * likely have a consumer accessing first few bytes of meta
+	 * data, and then actual data.
+	 */
+	prefetch(xdp->data_meta);
 #if L1_CACHE_BYTES < 128
-	prefetch(xdp->data + L1_CACHE_BYTES);
+	prefetch(xdp->data_meta + L1_CACHE_BYTES);
 #endif
 	/* build an skb around the page buffer */
 	skb = build_skb(xdp->data_hard_start, truesize);
@@ -2103,8 +2124,10 @@ static struct sk_buff *i40e_build_skb(struct i40e_ring *rx_ring,
 		return NULL;
 
 	/* update pointers within the skb to store the data */
-	skb_reserve(skb, I40E_SKB_PAD);
-	__skb_put(skb, size);
+	skb_reserve(skb, I40E_SKB_PAD + (xdp->data - xdp->data_hard_start));
+	__skb_put(skb, xdp->data_end - xdp->data);
+	if (metasize)
+		skb_metadata_set(skb, metasize);
 
 	/* buffer is used by skb, update page_offset */
 #if (PAGE_SIZE < 8192)
@@ -2341,7 +2364,7 @@ static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget)
 		if (!skb) {
 			xdp.data = page_address(rx_buffer->page) +
 				   rx_buffer->page_offset;
-			xdp_set_data_meta_invalid(&xdp);
+			xdp.data_meta = xdp.data;
 			xdp.data_hard_start = xdp.data -
 					      i40e_rx_offset(rx_ring);
 			xdp.data_end = xdp.data + size;

drivers/net/ethernet/intel/igb/igb_main.c

@@ -2058,6 +2058,7 @@ int igb_up(struct igb_adapter *adapter)
 		igb_assign_vector(adapter->q_vector[0], 0);
 
 	/* Clear any pending interrupts. */
+	rd32(E1000_TSICR);
 	rd32(E1000_ICR);
 	igb_irq_enable(adapter);
 
@@ -3865,6 +3866,7 @@ static int __igb_open(struct net_device *netdev, bool resuming)
 		napi_enable(&(adapter->q_vector[i]->napi));
 
 	/* Clear any pending interrupts. */
+	rd32(E1000_TSICR);
 	rd32(E1000_ICR);
 
 	igb_irq_enable(adapter);
@@ -4053,11 +4055,6 @@ void igb_configure_tx_ring(struct igb_adapter *adapter,
 	u64 tdba = ring->dma;
 	int reg_idx = ring->reg_idx;
 
-	/* disable the queue */
-	wr32(E1000_TXDCTL(reg_idx), 0);
-	wrfl();
-	mdelay(10);
-
 	wr32(E1000_TDLEN(reg_idx),
 	     ring->count * sizeof(union e1000_adv_tx_desc));
 	wr32(E1000_TDBAL(reg_idx),
@@ -4088,8 +4085,16 @@ void igb_configure_tx_ring(struct igb_adapter *adapter,
  **/
 static void igb_configure_tx(struct igb_adapter *adapter)
 {
+	struct e1000_hw *hw = &adapter->hw;
 	int i;
 
+	/* disable the queues */
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		wr32(E1000_TXDCTL(adapter->tx_ring[i]->reg_idx), 0);
+
+	wrfl();
+	usleep_range(10000, 20000);
+
 	for (i = 0; i < adapter->num_tx_queues; i++)
 		igb_configure_tx_ring(adapter, adapter->tx_ring[i]);
 }

drivers/net/ethernet/intel/ixgbe/ixgbe_debugfs.c

@@ -10,15 +10,9 @@ static struct dentry *ixgbe_dbg_root;
 
 static char ixgbe_dbg_reg_ops_buf[256] = "";
 
-/**
- * ixgbe_dbg_reg_ops_read - read for reg_ops datum
- * @filp: the opened file
- * @buffer: where to write the data for the user to read
- * @count: the size of the user's buffer
- * @ppos: file position offset
- **/
-static ssize_t ixgbe_dbg_reg_ops_read(struct file *filp, char __user *buffer,
-				    size_t count, loff_t *ppos)
+static ssize_t ixgbe_dbg_common_ops_read(struct file *filp, char __user *buffer,
+					 size_t count, loff_t *ppos,
+					 char *dbg_buf)
 {
 	struct ixgbe_adapter *adapter = filp->private_data;
 	char *buf;
@@ -29,8 +23,7 @@ static ssize_t ixgbe_dbg_reg_ops_read(struct file *filp, char __user *buffer,
 		return 0;
 
 	buf = kasprintf(GFP_KERNEL, "%s: %s\n",
-			adapter->netdev->name,
-			ixgbe_dbg_reg_ops_buf);
+			adapter->netdev->name, dbg_buf);
 	if (!buf)
 		return -ENOMEM;
 
@@ -45,6 +38,20 @@ static ssize_t ixgbe_dbg_reg_ops_read(struct file *filp, char __user *buffer,
 	return len;
 }
 
+/**
+ * ixgbe_dbg_reg_ops_read - read for reg_ops datum
+ * @filp: the opened file
+ * @buffer: where to write the data for the user to read
+ * @count: the size of the user's buffer
+ * @ppos: file position offset
+ **/
+static ssize_t ixgbe_dbg_reg_ops_read(struct file *filp, char __user *buffer,
+				      size_t count, loff_t *ppos)
+{
+	return ixgbe_dbg_common_ops_read(filp, buffer, count, ppos,
+					 ixgbe_dbg_reg_ops_buf);
+}
+
 /**
  * ixgbe_dbg_reg_ops_write - write into reg_ops datum
  * @filp: the opened file
@@ -121,33 +128,11 @@ static char ixgbe_dbg_netdev_ops_buf[256] = "";
  * @count: the size of the user's buffer
  * @ppos: file position offset
  **/
-static ssize_t ixgbe_dbg_netdev_ops_read(struct file *filp,
-					 char __user *buffer,
+static ssize_t ixgbe_dbg_netdev_ops_read(struct file *filp, char __user *buffer,
 					 size_t count, loff_t *ppos)
 {
-	struct ixgbe_adapter *adapter = filp->private_data;
-	char *buf;
-	int len;
-
-	/* don't allow partial reads */
-	if (*ppos != 0)
-		return 0;
-
-	buf = kasprintf(GFP_KERNEL, "%s: %s\n",
-			adapter->netdev->name,
+	return ixgbe_dbg_common_ops_read(filp, buffer, count, ppos,
 					 ixgbe_dbg_netdev_ops_buf);
-	if (!buf)
-		return -ENOMEM;
-
-	if (count < strlen(buf)) {
-		kfree(buf);
-		return -ENOSPC;
-	}
-
-	len = simple_read_from_buffer(buffer, count, ppos, buf, strlen(buf));
-
-	kfree(buf);
-	return len;
 }
 
 /**

drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c

@@ -444,6 +444,89 @@ static int ixgbe_ipsec_parse_proto_keys(struct xfrm_state *xs,
 	return 0;
 }
 
+/**
+ * ixgbe_ipsec_check_mgmt_ip - make sure there is no clash with mgmt IP filters
+ * @xs: pointer to transformer state struct
+ **/
+static int ixgbe_ipsec_check_mgmt_ip(struct xfrm_state *xs)
+{
+	struct net_device *dev = xs->xso.dev;
+	struct ixgbe_adapter *adapter = netdev_priv(dev);
+	struct ixgbe_hw *hw = &adapter->hw;
+	u32 mfval, manc, reg;
+	int num_filters = 4;
+	bool manc_ipv4;
+	u32 bmcipval;
+	int i, j;
+
+#define MANC_EN_IPV4_FILTER      BIT(24)
+#define MFVAL_IPV4_FILTER_SHIFT  16
+#define MFVAL_IPV6_FILTER_SHIFT  24
+#define MIPAF_ARR(_m, _n)        (IXGBE_MIPAF + ((_m) * 0x10) + ((_n) * 4))
+
+#define IXGBE_BMCIP(_n)          (0x5050 + ((_n) * 4))
+#define IXGBE_BMCIPVAL           0x5060
+#define BMCIP_V4                 0x2
+#define BMCIP_V6                 0x3
+#define BMCIP_MASK               0x3
+
+	manc = IXGBE_READ_REG(hw, IXGBE_MANC);
+	manc_ipv4 = !!(manc & MANC_EN_IPV4_FILTER);
+	mfval = IXGBE_READ_REG(hw, IXGBE_MFVAL);
+	bmcipval = IXGBE_READ_REG(hw, IXGBE_BMCIPVAL);
+
+	if (xs->props.family == AF_INET) {
+		/* are there any IPv4 filters to check? */
+		if (manc_ipv4) {
+			/* the 4 ipv4 filters are all in MIPAF(3, i) */
+			for (i = 0; i < num_filters; i++) {
+				if (!(mfval & BIT(MFVAL_IPV4_FILTER_SHIFT + i)))
+					continue;
+
+				reg = IXGBE_READ_REG(hw, MIPAF_ARR(3, i));
+				if (reg == xs->id.daddr.a4)
+					return 1;
+			}
+		}
+
+		if ((bmcipval & BMCIP_MASK) == BMCIP_V4) {
+			reg = IXGBE_READ_REG(hw, IXGBE_BMCIP(3));
+			if (reg == xs->id.daddr.a4)
+				return 1;
+		}
+
+	} else {
+		/* if there are ipv4 filters, they are in the last ipv6 slot */
+		if (manc_ipv4)
+			num_filters = 3;
+
+		for (i = 0; i < num_filters; i++) {
+			if (!(mfval & BIT(MFVAL_IPV6_FILTER_SHIFT + i)))
+				continue;
+
+			for (j = 0; j < 4; j++) {
+				reg = IXGBE_READ_REG(hw, MIPAF_ARR(i, j));
+				if (reg != xs->id.daddr.a6[j])
+					break;
+			}
+			if (j == 4)   /* did we match all 4 words? */
+				return 1;
+		}
+
+		if ((bmcipval & BMCIP_MASK) == BMCIP_V6) {
+			for (j = 0; j < 4; j++) {
+				reg = IXGBE_READ_REG(hw, IXGBE_BMCIP(j));
+				if (reg != xs->id.daddr.a6[j])
+					break;
+			}
+			if (j == 4)   /* did we match all 4 words? */
+				return 1;
+		}
+	}
+
+	return 0;
+}
+
 /**
  * ixgbe_ipsec_add_sa - program device with a security association
  * @xs: pointer to transformer state struct
@@ -465,6 +548,11 @@ static int ixgbe_ipsec_add_sa(struct xfrm_state *xs)
 		return -EINVAL;
 	}
 
+	if (ixgbe_ipsec_check_mgmt_ip(xs)) {
+		netdev_err(dev, "IPsec IP addr clash with mgmt filters\n");
+		return -EINVAL;
+	}
+
 	if (xs->xso.flags & XFRM_OFFLOAD_INBOUND) {
 		struct rx_sa rsa;
 
@@ -575,7 +663,7 @@ static int ixgbe_ipsec_add_sa(struct xfrm_state *xs)
 
 		/* hash the new entry for faster search in Rx path */
 		hash_add_rcu(ipsec->rx_sa_list, &ipsec->rx_tbl[sa_idx].hlist,
-			     (__force u64)rsa.xs->id.spi);
+			     (__force u32)rsa.xs->id.spi);
 	} else {
 		struct tx_sa tsa;
 

drivers/net/ethernet/intel/ixgbe/ixgbe_main.c

@@ -7621,17 +7621,19 @@ static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter)
 	if (!test_and_clear_bit(__IXGBE_RESET_REQUESTED, &adapter->state))
 		return;
 
+	rtnl_lock();
 	/* If we're already down, removing or resetting, just bail */
 	if (test_bit(__IXGBE_DOWN, &adapter->state) ||
 	    test_bit(__IXGBE_REMOVING, &adapter->state) ||
-	    test_bit(__IXGBE_RESETTING, &adapter->state))
+	    test_bit(__IXGBE_RESETTING, &adapter->state)) {
+		rtnl_unlock();
 		return;
+	}
 
 	ixgbe_dump(adapter);
 	netdev_err(adapter->netdev, "Reset adapter\n");
 	adapter->tx_timeout_count++;
 
-	rtnl_lock();
 	ixgbe_reinit_locked(adapter);
 	rtnl_unlock();
 }

drivers/net/ethernet/intel/ixgbevf/ixgbevf.h

@@ -76,6 +76,7 @@ enum ixgbevf_ring_state_t {
 	__IXGBEVF_TX_DETECT_HANG,
 	__IXGBEVF_HANG_CHECK_ARMED,
 	__IXGBEVF_TX_XDP_RING,
+	__IXGBEVF_TX_XDP_RING_PRIMED,
 };
 
 #define ring_is_xdp(ring) \

drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c

@@ -991,24 +991,45 @@ static int ixgbevf_xmit_xdp_ring(struct ixgbevf_ring *ring,
 		return IXGBEVF_XDP_CONSUMED;
 
 	/* record the location of the first descriptor for this packet */
-	tx_buffer = &ring->tx_buffer_info[ring->next_to_use];
-	tx_buffer->bytecount = len;
-	tx_buffer->gso_segs = 1;
-	tx_buffer->protocol = 0;
-
 	i = ring->next_to_use;
-	tx_desc = IXGBEVF_TX_DESC(ring, i);
+	tx_buffer = &ring->tx_buffer_info[i];
 
 	dma_unmap_len_set(tx_buffer, len, len);
 	dma_unmap_addr_set(tx_buffer, dma, dma);
 	tx_buffer->data = xdp->data;
-	tx_desc->read.buffer_addr = cpu_to_le64(dma);
+	tx_buffer->bytecount = len;
+	tx_buffer->gso_segs = 1;
+	tx_buffer->protocol = 0;
+
+	/* Populate minimal context descriptor that will provide for the
+	 * fact that we are expected to process Ethernet frames.
+	 */
+	if (!test_bit(__IXGBEVF_TX_XDP_RING_PRIMED, &ring->state)) {
+		struct ixgbe_adv_tx_context_desc *context_desc;
+
+		set_bit(__IXGBEVF_TX_XDP_RING_PRIMED, &ring->state);
+
+		context_desc = IXGBEVF_TX_CTXTDESC(ring, 0);
+		context_desc->vlan_macip_lens	=
+			cpu_to_le32(ETH_HLEN << IXGBE_ADVTXD_MACLEN_SHIFT);
+		context_desc->seqnum_seed	= 0;
+		context_desc->type_tucmd_mlhl	=
+			cpu_to_le32(IXGBE_TXD_CMD_DEXT |
+				    IXGBE_ADVTXD_DTYP_CTXT);
+		context_desc->mss_l4len_idx	= 0;
+
+		i = 1;
+	}
 
 	/* put descriptor type bits */
 	cmd_type = IXGBE_ADVTXD_DTYP_DATA |
 		   IXGBE_ADVTXD_DCMD_DEXT |
 		   IXGBE_ADVTXD_DCMD_IFCS;
 	cmd_type |= len | IXGBE_TXD_CMD;
+
+	tx_desc = IXGBEVF_TX_DESC(ring, i);
+	tx_desc->read.buffer_addr = cpu_to_le64(dma);
+
 	tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type);
 	tx_desc->read.olinfo_status =
 			cpu_to_le32((len << IXGBE_ADVTXD_PAYLEN_SHIFT) |
@@ -1688,6 +1709,7 @@ static void ixgbevf_configure_tx_ring(struct ixgbevf_adapter *adapter,
 	       sizeof(struct ixgbevf_tx_buffer) * ring->count);
 
 	clear_bit(__IXGBEVF_HANG_CHECK_ARMED, &ring->state);
+	clear_bit(__IXGBEVF_TX_XDP_RING_PRIMED, &ring->state);
 
 	IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(reg_idx), txdctl);
 
@@ -3119,15 +3141,17 @@ static void ixgbevf_reset_subtask(struct ixgbevf_adapter *adapter)
 	if (!test_and_clear_bit(__IXGBEVF_RESET_REQUESTED, &adapter->state))
 		return;
 
+	rtnl_lock();
 	/* If we're already down or resetting, just bail */
 	if (test_bit(__IXGBEVF_DOWN, &adapter->state) ||
 	    test_bit(__IXGBEVF_REMOVING, &adapter->state) ||
-	    test_bit(__IXGBEVF_RESETTING, &adapter->state))
+	    test_bit(__IXGBEVF_RESETTING, &adapter->state)) {
+		rtnl_unlock();
 		return;
+	}
 
 	adapter->tx_timeout_count++;
 
-	rtnl_lock();
 	ixgbevf_reinit_locked(adapter);
 	rtnl_unlock();
 }