Commit d78343d2 authored by Vivien Didelot's avatar Vivien Didelot Committed by David S. Miller

net: dsa: mv88e6xxx: setup port's MAC

Now that we have setters to configure the port's MAC, use them to
refactor the port setup and adjust_link code.

Note that port's MAC speed, duplex or RGMII delay must not be changed
unless the port's link is forced down. So wrap all that in a
mv88e6xxx_port_setup_mac function.
Signed-off-by: default avatarVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 96a2b40c
...@@ -701,6 +701,47 @@ static bool mv88e6xxx_6352_family(struct mv88e6xxx_chip *chip) ...@@ -701,6 +701,47 @@ static bool mv88e6xxx_6352_family(struct mv88e6xxx_chip *chip)
return chip->info->family == MV88E6XXX_FAMILY_6352; return chip->info->family == MV88E6XXX_FAMILY_6352;
} }
static int mv88e6xxx_port_setup_mac(struct mv88e6xxx_chip *chip, int port,
int link, int speed, int duplex,
phy_interface_t mode)
{
int err;
if (!chip->info->ops->port_set_link)
return 0;
/* Port's MAC control must not be changed unless the link is down */
err = chip->info->ops->port_set_link(chip, port, 0);
if (err)
return err;
if (chip->info->ops->port_set_speed) {
err = chip->info->ops->port_set_speed(chip, port, speed);
if (err && err != -EOPNOTSUPP)
goto restore_link;
}
if (chip->info->ops->port_set_duplex) {
err = chip->info->ops->port_set_duplex(chip, port, duplex);
if (err && err != -EOPNOTSUPP)
goto restore_link;
}
if (chip->info->ops->port_set_rgmii_delay) {
err = chip->info->ops->port_set_rgmii_delay(chip, port, mode);
if (err && err != -EOPNOTSUPP)
goto restore_link;
}
err = 0;
restore_link:
if (chip->info->ops->port_set_link(chip, port, link))
netdev_err(chip->ds->ports[port].netdev,
"failed to restore MAC's link\n");
return err;
}
/* We expect the switch to perform auto negotiation if there is a real /* We expect the switch to perform auto negotiation if there is a real
* phy. However, in the case of a fixed link phy, we force the port * phy. However, in the case of a fixed link phy, we force the port
* settings from the fixed link settings. * settings from the fixed link settings.
...@@ -709,64 +750,18 @@ static void mv88e6xxx_adjust_link(struct dsa_switch *ds, int port, ...@@ -709,64 +750,18 @@ static void mv88e6xxx_adjust_link(struct dsa_switch *ds, int port,
struct phy_device *phydev) struct phy_device *phydev)
{ {
struct mv88e6xxx_chip *chip = ds->priv; struct mv88e6xxx_chip *chip = ds->priv;
u16 reg;
int err; int err;
if (!phy_is_pseudo_fixed_link(phydev)) if (!phy_is_pseudo_fixed_link(phydev))
return; return;
mutex_lock(&chip->reg_lock); mutex_lock(&chip->reg_lock);
err = mv88e6xxx_port_setup_mac(chip, port, phydev->link, phydev->speed,
err = mv88e6xxx_port_read(chip, port, PORT_PCS_CTRL, &reg); phydev->duplex, phydev->interface);
if (err)
goto out;
reg &= ~(PORT_PCS_CTRL_LINK_UP |
PORT_PCS_CTRL_FORCE_LINK |
PORT_PCS_CTRL_DUPLEX_FULL |
PORT_PCS_CTRL_FORCE_DUPLEX |
PORT_PCS_CTRL_SPEED_UNFORCED);
reg |= PORT_PCS_CTRL_FORCE_LINK;
if (phydev->link)
reg |= PORT_PCS_CTRL_LINK_UP;
if (mv88e6xxx_6065_family(chip) && phydev->speed > SPEED_100)
goto out;
switch (phydev->speed) {
case SPEED_1000:
reg |= PORT_PCS_CTRL_SPEED_1000;
break;
case SPEED_100:
reg |= PORT_PCS_CTRL_SPEED_100;
break;
case SPEED_10:
reg |= PORT_PCS_CTRL_SPEED_10;
break;
default:
pr_info("Unknown speed");
goto out;
}
reg |= PORT_PCS_CTRL_FORCE_DUPLEX;
if (phydev->duplex == DUPLEX_FULL)
reg |= PORT_PCS_CTRL_DUPLEX_FULL;
if ((mv88e6xxx_6352_family(chip) || mv88e6xxx_6351_family(chip)) &&
(port >= mv88e6xxx_num_ports(chip) - 2)) {
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
reg |= PORT_PCS_CTRL_RGMII_DELAY_RXCLK;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
reg |= PORT_PCS_CTRL_RGMII_DELAY_TXCLK;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
reg |= (PORT_PCS_CTRL_RGMII_DELAY_RXCLK |
PORT_PCS_CTRL_RGMII_DELAY_TXCLK);
}
mv88e6xxx_port_write(chip, port, PORT_PCS_CTRL, reg);
out:
mutex_unlock(&chip->reg_lock); mutex_unlock(&chip->reg_lock);
if (err && err != -EOPNOTSUPP)
netdev_err(ds->ports[port].netdev, "failed to configure MAC\n");
} }
static int _mv88e6xxx_stats_wait(struct mv88e6xxx_chip *chip) static int _mv88e6xxx_stats_wait(struct mv88e6xxx_chip *chip)
...@@ -2409,35 +2404,20 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port) ...@@ -2409,35 +2404,20 @@ static int mv88e6xxx_setup_port(struct mv88e6xxx_chip *chip, int port)
int err; int err;
u16 reg; u16 reg;
if (mv88e6xxx_6352_family(chip) || mv88e6xxx_6351_family(chip) || /* MAC Forcing register: don't force link, speed, duplex or flow control
mv88e6xxx_6165_family(chip) || mv88e6xxx_6097_family(chip) || * state to any particular values on physical ports, but force the CPU
mv88e6xxx_6185_family(chip) || mv88e6xxx_6095_family(chip) || * port and all DSA ports to their maximum bandwidth and full duplex.
mv88e6xxx_6065_family(chip) || mv88e6xxx_6320_family(chip)) {
/* MAC Forcing register: don't force link, speed,
* duplex or flow control state to any particular
* values on physical ports, but force the CPU port
* and all DSA ports to their maximum bandwidth and
* full duplex.
*/ */
err = mv88e6xxx_port_read(chip, port, PORT_PCS_CTRL, &reg); if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port))
if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) { err = mv88e6xxx_port_setup_mac(chip, port, LINK_FORCED_UP,
reg &= ~PORT_PCS_CTRL_SPEED_UNFORCED; SPEED_MAX, DUPLEX_FULL,
reg |= PORT_PCS_CTRL_FORCE_LINK | PHY_INTERFACE_MODE_NA);
PORT_PCS_CTRL_LINK_UP |
PORT_PCS_CTRL_DUPLEX_FULL |
PORT_PCS_CTRL_FORCE_DUPLEX;
if (mv88e6xxx_6065_family(chip))
reg |= PORT_PCS_CTRL_SPEED_100;
else else
reg |= PORT_PCS_CTRL_SPEED_1000; err = mv88e6xxx_port_setup_mac(chip, port, LINK_UNFORCED,
} else { SPEED_UNFORCED, DUPLEX_UNFORCED,
reg |= PORT_PCS_CTRL_SPEED_UNFORCED; PHY_INTERFACE_MODE_NA);
}
err = mv88e6xxx_port_write(chip, port, PORT_PCS_CTRL, reg);
if (err) if (err)
return err; return err;
}
/* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock, /* Port Control: disable Drop-on-Unlock, disable Drop-on-Lock,
* disable Header mode, enable IGMP/MLD snooping, disable VLAN * disable Header mode, enable IGMP/MLD snooping, disable VLAN
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment