V4L/DVB (3646): Added support for the new Lifeview hybrid cardbus modules

There seem to be many variants of this cards with different
feature sets. This entry supports
analog TV, CVBS and s-video input, FM radio and DVB-T
if they are supported by the hardware.
Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Documentation/video4linux/CARDLIST.saa7134

@@ -92,3 +92,4 @@
  91 -> AVerMedia A169 B                         [1461:7360]
  92 -> AVerMedia A169 B1                        [1461:6360]
  93 -> Medion 7134 Bridge #2                    [16be:0005]
+ 94 -> LifeView FlyDVB-T Hybrid Cardbus         [5168:3306,5168:3502]

drivers/media/video/saa7134/saa7134-cards.c

@@ -2808,6 +2808,40 @@ struct saa7134_board saa7134_boards[] = {
 		.tuner_addr	= ADDR_UNSET,
 		.radio_addr	= ADDR_UNSET,
 	},
+	[SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS] = {
+		.name		= "LifeView FlyDVB-T Hybrid Cardbus",
+		.audio_clock    = 0x00200000,
+		.tuner_type     = TUNER_PHILIPS_TDA8290,
+		.radio_type     = UNSET,
+		.tuner_addr	= ADDR_UNSET,
+		.radio_addr	= ADDR_UNSET,
+		.mpeg           = SAA7134_MPEG_DVB,
+		.gpiomask       = 0x00600000, /* Bit 21 0=Radio, Bit 22 0=TV */
+		.inputs         = {{
+			.name = name_tv,
+			.vmux = 1,
+			.amux = TV,
+			.gpio = 0x200000,	/* GPIO21=High for TV input */
+			.tv   = 1,
+		},{
+			.name = name_svideo,	/* S-Video signal on S-Video input */
+			.vmux = 8,
+			.amux = LINE2,
+		},{
+			.name = name_comp1,	/* Composite signal on S-Video input */
+			.vmux = 0,
+			.amux = LINE2,
+		},{
+			.name = name_comp2,	/* Composite input */
+			.vmux = 3,
+			.amux = LINE2,
+		}},
+		.radio = {
+			.name = name_radio,
+			.amux = TV,
+			.gpio = 0x000000,	/* GPIO21=Low for FM radio antenna */
+		},
+	},
 };
 
 const unsigned int saa7134_bcount = ARRAY_SIZE(saa7134_boards);
@@ -3344,6 +3378,18 @@ struct pci_device_id saa7134_pci_tbl[] = {
 		.subvendor = 0x5168, /* Animation Technologies (LifeView) */
 		.subdevice = 0x0304,
 		.driver_data = SAA7134_BOARD_FLYTVPLATINUM_FM,
+	},{
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x5168,
+		.subdevice    = 0x3306,
+		.driver_data  = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS,
+	},{
+		.vendor       = PCI_VENDOR_ID_PHILIPS,
+		.device       = PCI_DEVICE_ID_PHILIPS_SAA7133,
+		.subvendor    = 0x5168,
+		.subdevice    = 0x3502,  /* whats the difference to 0x3306 ?*/
+		.driver_data  = SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS,
 	},{
 		/* --- boards without eeprom + subsystem ID --- */
 		.vendor       = PCI_VENDOR_ID_PHILIPS,
@@ -3474,6 +3520,7 @@ int saa7134_board_init1(struct saa7134_dev *dev)
 		saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x06);
 		break;
 	case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
+	case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
 		saa_writeb(SAA7134_GPIO_GPMODE3, 0x08);
 		saa_writeb(SAA7134_GPIO_GPSTATUS3, 0x00);
 		break;
@@ -3645,6 +3692,7 @@ int saa7134_board_init2(struct saa7134_dev *dev)
 		}
 		break;
 	case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
+	case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
 		/* make the tda10046 find its eeprom */
 		{
 		u8 data[] = { 0x3c, 0x33, 0x62};

drivers/media/video/saa7134/saa7134-dvb.c

@@ -1064,6 +1064,10 @@ static int dvb_init(struct saa7134_dev *dev)
 		dev->dvb.frontend = tda10046_attach(&tevion_dvbt220rf_config,
 						    &dev->i2c_adap);
 		break;
+	case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
+		dev->dvb.frontend = tda10046_attach(&ads_tech_duo_config,
+						    &dev->i2c_adap);
+		break;
 #endif
 #ifdef HAVE_NXT200X
 	case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:

drivers/media/video/saa7134/saa7134.h

@@ -220,6 +220,7 @@ struct saa7134_format {
 #define SAA7134_BOARD_AVERMEDIA_A169_B 91
 #define SAA7134_BOARD_AVERMEDIA_A169_B1 92
 #define SAA7134_BOARD_MD7134_BRIDGE_2     93
+#define SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS 94
 
 #define SAA7134_MAXBOARDS 8
 #define SAA7134_INPUT_MAX 8