Skip to content

L
linux
Commit d964d911 authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz Committed by Linus Torvalds
Browse files
Options

[PATCH] ide: forward-port siimage driver changes from 2.4.22 

ide: forward-port siimage driver changes from 2.4.22
parent 8fc7b528
Hide whitespace changes
Inline Side-by-side
Showing with 609 additions and 245 deletions
drivers/ide/pci/siimage.c
View file @ d964d911
/*
* linux/drivers/ide/pci/siimage.c Version 1.02 Jan 30, 2003
* linux/drivers/ide/pci/siimage.c Version 1.06 June 11, 2003
*
* Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
*
* May be copied or modified under the terms of the GNU General Public License
*
* Documentation available under NDA only
*
*
* FAQ Items:
* If you are using Marvell SATA-IDE adapters with Maxtor drives
* ensure the system is set up for ATA100/UDMA5 not UDMA6.
*
* If you are using WD drives with SATA bridges you must set the
* drive to "Single". "Master" will hang
*
* If you have strange problems with nVidia chipset systems please
* see the SI support documentation and update your system BIOS
* if neccessary
*/
#include <linux/config.h>
......@@ -22,16 +39,107 @@
#include <linux/proc_fs.h>
static u8 siimage_proc = 0;
#define SIIMAGE_MAX_DEVS 5
#define SIIMAGE_MAX_DEVS 16
static struct pci_dev *siimage_devs[SIIMAGE_MAX_DEVS];
static int n_siimage_devs;
static char * print_siimage_get_info (char *buf, struct pci_dev *dev, int index)
/**
* pdev_is_sata - check if device is SATA
* @pdev: PCI device to check
*
* Returns true if this is a SATA controller
*/
static int pdev_is_sata(struct pci_dev *pdev)
{
switch(pdev->device)
{
case PCI_DEVICE_ID_SII_3112:
case PCI_DEVICE_ID_SII_1210SA:
return 1;
case PCI_DEVICE_ID_SII_680:
return 0;
}
BUG();
return 0;
}
/**
* is_sata - check if hwif is SATA
* @hwif: interface to check
*
* Returns true if this is a SATA controller
*/
static inline int is_sata(ide_hwif_t *hwif)
{
return pdev_is_sata(hwif->pci_dev);
}
/**
* siimage_selreg - return register base
* @hwif: interface
* @r: config offset
*
* Turn a config register offset into the right address in either
* PCI space or MMIO space to access the control register in question
* Thankfully this is a configuration operation so isnt performance
* criticial.
*/
static unsigned long siimage_selreg(ide_hwif_t *hwif, int r)
{
unsigned long base = (unsigned long)hwif->hwif_data;
base += 0xA0 + r;
if(hwif->mmio)
base += (hwif->channel << 6);
else
base += (hwif->channel << 4);
return base;
}
/**
* siimage_seldev - return register base
* @hwif: interface
* @r: config offset
*
* Turn a config register offset into the right address in either
* PCI space or MMIO space to access the control register in question
* including accounting for the unit shift.
*/
static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long base = (unsigned long)hwif->hwif_data;
base += 0xA0 + r;
if(hwif->mmio)
base += (hwif->channel << 6);
else
base += (hwif->channel << 4);
base |= drive->select.b.unit << drive->select.b.unit;
return base;
}
/**
* print_siimage_get_info - print minimal proc information
* @buf: buffer to write into (kernel space)
* @dev: PCI device we are describing
* @index: Controller number
*
* Print the basic information for the state of the CMD680/SI3112
* channel. We don't actually dump a lot of information out for
* this controller although we could expand it if we needed.
*/
static char *print_siimage_get_info (char *buf, struct pci_dev *dev, int index)
{
char *p = buf;
u8 mmio = (pci_get_drvdata(dev) != NULL) ? 1 : 0;
unsigned long bmdma = (mmio) ? ((unsigned long) pci_get_drvdata(dev)) :
(pci_resource_start(dev, 4));
unsigned long bmdma = pci_resource_start(dev, 4);
if(mmio)
bmdma = pci_resource_start(dev, 5);
p += sprintf(p, "\nController: %d\n", index);
p += sprintf(p, "SiI%x Chipset.\n", dev->device);
......@@ -39,18 +147,20 @@ static char * print_siimage_get_info (char *buf, struct pci_dev *dev, int index)
p += sprintf(p, "MMIO Base 0x%lx\n", bmdma);
p += sprintf(p, "%s-DMA Base 0x%lx\n", (mmio)?"MMIO":"BM", bmdma);
p += sprintf(p, "%s-DMA Base 0x%lx\n", (mmio)?"MMIO":"BM", bmdma+8);
p += sprintf(p, "--------------- Primary Channel "
"---------------- Secondary Channel "
"-------------\n");
p += sprintf(p, "--------------- drive0 --------- drive1 "
"-------- drive0 ---------- drive1 ------\n");
p += sprintf(p, "PIO Mode: %s %s"
" %s %s\n",
"?", "?", "?", "?");
return (char *)p;
}
/**
* siimage_get_info - proc callback
* @buffer: kernel buffer to complete
* @addr: written with base of data to return
* offset: seek offset
* count: bytes to fill in
*
* Called when the user reads data from the virtual file for this
* controller from /proc
*/
static int siimage_get_info (char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
......@@ -71,46 +181,70 @@ static int siimage_get_info (char *buffer, char **addr, off_t offset, int count)
#endif /* defined(DISPLAY_SIIMAGE_TIMINGS) && defined(CONFIG_PROC_FS) */
/**
* siimage_ratemask - Compute available modes
* @drive: IDE drive
*
* Compute the available speeds for the devices on the interface.
* For the CMD680 this depends on the clocking mode (scsc), for the
* SI3312 SATA controller life is a bit simpler. Enforce UDMA33
* as a limit if there is no 80pin cable present.
*/
static byte siimage_ratemask (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 mode = 0, scsc = 0;
unsigned long base = (unsigned long) hwif->hwif_data;
if (hwif->mmio)
scsc = hwif->INB(HWIFADDR(0x4A));
scsc = hwif->INB(base + 0x4A);
else
pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc);
switch(hwif->pci_dev->device) {
case PCI_DEVICE_ID_SII_3112:
return 4;
case PCI_DEVICE_ID_SII_680:
if ((scsc & 0x10) == 0x10) /* 133 */
mode = 4;
else if ((scsc & 0x30) == 0x00) /* 100 */
mode = 3;
else if ((scsc & 0x20) == 0x20) /* 66 eek */
BUG(); // mode = 2;
break;
default: return 0;
if(is_sata(hwif))
{
if(strstr(drive->id->model, "Maxtor"))
return 3;
return 4;
}
if ((scsc & 0x30) == 0x10) /* 133 */
mode = 4;
else if ((scsc & 0x30) == 0x20) /* 2xPCI */
mode = 4;
else if ((scsc & 0x30) == 0x00) /* 100 */
mode = 3;
else /* Disabled ? */
BUG();
if (!eighty_ninty_three(drive))
mode = min(mode, (u8)1);
return mode;
}
/**
* siimage_taskfile_timing - turn timing data to a mode
* @hwif: interface to query
*
* Read the timing data for the interface and return the
* mode that is being used.
*/
static byte siimage_taskfile_timing (ide_hwif_t *hwif)
{
u16 timing = 0x328a;
unsigned long addr = siimage_selreg(hwif, 2);
if (hwif->mmio)
timing = hwif->INW(SELADDR(2));
timing = hwif->INW(addr);
else
pci_read_config_word(hwif->pci_dev, SELREG(2), &timing);
pci_read_config_word(hwif->pci_dev, addr, &timing);
switch (timing) {
case 0x10c1: return 4;
case 0x10c3: return 3;
case 0x1104:
case 0x1281: return 2;
case 0x2283: return 1;
case 0x328a:
......@@ -118,34 +252,88 @@ static byte siimage_taskfile_timing (ide_hwif_t *hwif)
}
}
/**
* simmage_tuneproc - tune a drive
* @drive: drive to tune
* @mode_wanted: the target operating mode
*
* Load the timing settings for this device mode into the
* controller. If we are in PIO mode 3 or 4 turn on IORDY
* monitoring (bit 9). The TF timing is bits 31:16
*/
static void siimage_tuneproc (ide_drive_t *drive, byte mode_wanted)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
u16 speedt = 0;
u8 unit = drive->select.b.unit;
if (hwif->mmio)
speedt = hwif->INW(SELADDR(0x04|(unit<<unit)));
else
pci_read_config_word(dev, SELADDR(0x04|(unit<<unit)), &speedt);
u32 speedt = 0;
u16 speedp = 0;
unsigned long addr = siimage_seldev(drive, 0x04);
unsigned long tfaddr = siimage_selreg(hwif, 0x02);
/* cheat for now and use the docs */
// switch(siimage_taskfile_timing(hwif)) {
switch(mode_wanted) {
case 4: speedt = 0x10c1; break;
case 3: speedt = 0x10C3; break;
case 2: speedt = 0x1104; break;
case 1: speedt = 0x2283; break;
case 4:
speedp = 0x10c1;
speedt = 0x10c1;
break;
case 3:
speedp = 0x10C3;
speedt = 0x10C3;
break;
case 2:
speedp = 0x1104;
speedt = 0x1281;
break;
case 1:
speedp = 0x2283;
speedt = 0x1281;
break;
case 0:
default: speedt = 0x328A; break;
default:
speedp = 0x328A;
speedt = 0x328A;
break;
}
if (hwif->mmio)
hwif->OUTW(speedt, SELADDR(0x04|(unit<<unit)));
{
hwif->OUTW(speedt, addr);
hwif->OUTW(speedp, tfaddr);
/* Now set up IORDY */
if(mode_wanted == 3 || mode_wanted == 4)
hwif->OUTW(hwif->INW(tfaddr-2)|0x200, tfaddr-2);
else
hwif->OUTW(hwif->INW(tfaddr-2)&~0x200, tfaddr-2);
}
else
pci_write_config_word(dev, SELADDR(0x04|(unit<<unit)), speedt);
{
pci_write_config_word(hwif->pci_dev, addr, speedp);
pci_write_config_word(hwif->pci_dev, tfaddr, speedt);
pci_read_config_word(hwif->pci_dev, tfaddr-2, &speedp);
speedp &= ~0x200;
/* Set IORDY for mode 3 or 4 */
if(mode_wanted == 3 || mode_wanted == 4)
speedp |= 0x200;
pci_write_config_word(hwif->pci_dev, tfaddr-2, speedp);
}
}
/**
* config_siimage_chipset_for_pio - set drive timings
* @drive: drive to tune
* @speed we want
*
* Compute the best pio mode we can for a given device. Also honour
* the timings for the driver when dealing with mixed devices. Some
* of this is ugly but its all wrapped up here
*
* The SI680 can also do VDMA - we need to start using that
*
* FIXME: we use the BIOS channel timings to avoid driving the task
* files too fast at the disk. We need to compute the master/slave
* drive PIO mode properly so that we can up the speed on a hotplug
* system.
*/
static void config_siimage_chipset_for_pio (ide_drive_t *drive, byte set_speed)
{
u8 channel_timings = siimage_taskfile_timing(HWIF(drive));
......@@ -166,6 +354,16 @@ static void config_chipset_for_pio (ide_drive_t *drive, byte set_speed)
config_siimage_chipset_for_pio(drive, set_speed);
}
/**
* siimage_tune_chipset - set controller timings
* @drive: Drive to set up
* @xferspeed: speed we want to achieve
*
* Tune the SII chipset for the desired mode. If we can't achieve
* the desired mode then tune for a lower one, but ultimately
* make the thing work.
*/
static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
{
u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
......@@ -175,30 +373,32 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
ide_hwif_t *hwif = HWIF(drive);
u16 ultra = 0, multi = 0;
u8 mode = 0, unit = drive->select.b.unit;
u8 speed = ide_rate_filter(siimage_ratemask(drive), xferspeed);
u8 speed = ide_rate_filter(siimage_ratemask(drive), xferspeed);
unsigned long base = (unsigned long)hwif->hwif_data;
u8 scsc = 0, addr_mask = ((hwif->channel) ?
((hwif->mmio) ? 0xF4 : 0x84) :
((hwif->mmio) ? 0xB4 : 0x80));
unsigned long ma = siimage_seldev(drive, 0x08);
unsigned long ua = siimage_seldev(drive, 0x0C);
if (hwif->mmio) {
scsc = hwif->INB(HWIFADDR(0x4A));
mode = hwif->INB(HWIFADDR(addr_mask));
multi = hwif->INW(SELADDR(0x08|(unit<<unit)));
ultra = hwif->INW(SELADDR(0x0C|(unit<<unit)));
scsc = hwif->INB(base + 0x4A);
mode = hwif->INB(base + addr_mask);
multi = hwif->INW(ma);
ultra = hwif->INW(ua);
} else {
pci_read_config_byte(hwif->pci_dev, HWIFADDR(0x8A), &scsc);
pci_read_config_byte(hwif->pci_dev, 0x8A, &scsc);
pci_read_config_byte(hwif->pci_dev, addr_mask, &mode);
pci_read_config_word(hwif->pci_dev,
SELREG(0x08|(unit<<unit)), &multi);
pci_read_config_word(hwif->pci_dev,
SELREG(0x0C|(unit<<unit)), &ultra);
pci_read_config_word(hwif->pci_dev, ma, &multi);
pci_read_config_word(hwif->pci_dev, ua, &ultra);
}
mode &= ~((unit) ? 0x30 : 0x03);
ultra &= ~0x3F;
scsc = ((scsc & 0x30) == 0x00) ? 0 : 1;
scsc = (hwif->pci_dev->device == PCI_DEVICE_ID_SII_3112) ? 1 : scsc;
scsc = is_sata(hwif) ? 1 : scsc;
switch(speed) {
case XFER_PIO_4:
......@@ -224,8 +424,8 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
case XFER_UDMA_1:
case XFER_UDMA_0:
multi = dma[2];
ultra |= ((scsc) ? (ultra5[speed - XFER_UDMA_0]) :
(ultra6[speed - XFER_UDMA_0]));
ultra |= ((scsc) ? (ultra6[speed - XFER_UDMA_0]) :
(ultra5[speed - XFER_UDMA_0]));
mode |= ((unit) ? 0x30 : 0x03);
config_siimage_chipset_for_pio(drive, 0);
break;
......@@ -234,20 +434,26 @@ static int siimage_tune_chipset (ide_drive_t *drive, byte xferspeed)
}
if (hwif->mmio) {
hwif->OUTB(mode, HWIFADDR(addr_mask));
hwif->OUTW(multi, SELADDR(0x08|(unit<<unit)));
hwif->OUTW(ultra, SELADDR(0x0C|(unit<<unit)));
hwif->OUTB(mode, base + addr_mask);
hwif->OUTW(multi, ma);
hwif->OUTW(ultra, ua);
} else {
pci_write_config_byte(hwif->pci_dev, addr_mask, mode);
pci_write_config_word(hwif->pci_dev,
SELREG(0x08|(unit<<unit)), multi);
pci_write_config_word(hwif->pci_dev,
SELREG(0x0C|(unit<<unit)), ultra);
pci_write_config_word(hwif->pci_dev, ma, multi);
pci_write_config_word(hwif->pci_dev, ua, ultra);
}
return (ide_config_drive_speed(drive, speed));
}
/**
* config_chipset_for_dma - configure for DMA
* @drive: drive to configure
*
* Called by the IDE layer when it wants the timings set up.
* For the CMD680 we also need to set up the PIO timings and
* enable DMA.
*/
static int config_chipset_for_dma (ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, siimage_ratemask(drive));
......@@ -266,14 +472,22 @@ static int config_chipset_for_dma (ide_drive_t *drive)
return ide_dma_enable(drive);
}
/**
* siimage_configure_drive_for_dma - set up for DMA transfers
* @drive: drive we are going to set up
*
* Set up the drive for DMA, tune the controller and drive as
* required. If the drive isn't suitable for DMA or we hit
* other problems then we will drop down to PIO and set up
* PIO appropriately
*/
static int siimage_config_drive_for_dma (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
struct hd_driveid *id = drive->id;
if (id != NULL && (id->capability & 1) != 0 && drive->autodma) {
if (!(hwif->atapi_dma))
goto fast_ata_pio;
if ((id->capability & 1) != 0 && drive->autodma) {
/* Consult the list of known "bad" drives */
if (hwif->ide_dma_bad_drive(drive))
goto fast_ata_pio;
......@@ -315,18 +529,28 @@ static int siimage_io_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 dma_altstat = 0;
unsigned long addr = siimage_selreg(hwif, 1);
/* return 1 if INTR asserted */
if ((hwif->INB(hwif->dma_status) & 4) == 4)
return 1;
/* return 1 if Device INTR asserted */
pci_read_config_byte(hwif->pci_dev, SELREG(1), &dma_altstat);
pci_read_config_byte(hwif->pci_dev, addr, &dma_altstat);
if (dma_altstat & 8)
return 0; //return 1;
return 0;
}
/**
* siimage_mmio_ide_dma_count - DMA bytes done
* @drive
*
* If we are doing VDMA the CMD680 requires a little bit
* of more careful handling and we have to read the counts
* off ourselves. For non VDMA life is normal.
*/
static int siimage_mmio_ide_dma_count (ide_drive_t *drive)
{
#ifdef SIIMAGE_VIRTUAL_DMAPIO
......@@ -334,9 +558,10 @@ static int siimage_mmio_ide_dma_count (ide_drive_t *drive)
ide_hwif_t *hwif = HWIF(drive);
u32 count = (rq->nr_sectors * SECTOR_SIZE);
u32 rcount = 0;
unsigned long addr = siimage_selreg(hwif, 0x1C);
hwif->OUTL(count, SELADDR(0x1C));
rcount = hwif->INL(SELADDR(0x1C));
hwif->OUTL(count, addr);
rcount = hwif->INL(addr);
printk("\n%s: count = %d, rcount = %d, nr_sectors = %lu\n",
drive->name, count, rcount, rq->nr_sectors);
......@@ -345,13 +570,22 @@ static int siimage_mmio_ide_dma_count (ide_drive_t *drive)
return __ide_dma_count(drive);
}
/* returns 1 if dma irq issued, 0 otherwise */
/**
* siimage_mmio_ide_dma_test_irq - check we caused an IRQ
* @drive: drive we are testing
*
* Check if we caused an IDE DMA interrupt. We may also have caused
* SATA status interrupts, if so we clean them up and continue.
*/
static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned long base = (unsigned long)hwif->hwif_data;
unsigned long addr = siimage_selreg(hwif, 0x1);
if (SATA_ERROR_REG) {
u32 ext_stat = hwif->INL(HWIFADDR(0x10));
u32 ext_stat = hwif->INL(base + 0x10);
u8 watchdog = 0;
if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
u32 sata_error = hwif->INL(SATA_ERROR_REG);
......@@ -378,7 +612,7 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
return 1;
/* return 1 if Device INTR asserted */
if ((hwif->INB(SELADDR(1)) & 8) == 8)
if ((hwif->INB(addr) & 8) == 8)
return 0; //return 1;
return 0;
......@@ -387,21 +621,29 @@ static int siimage_mmio_ide_dma_test_irq (ide_drive_t *drive)
static int siimage_mmio_ide_dma_verbose (ide_drive_t *drive)
{
int temp = __ide_dma_verbose(drive);
#if 0
drive->using_dma = 0;
#endif
return temp;
}
/**
* siimage_busproc - bus isolation ioctl
* @drive: drive to isolate/restore
* @state: bus state to set
*
* Used by the SII3112 to handle bus isolation. As this is a
* SATA controller the work required is quite limited, we
* just have to clean up the statistics
*/
static int siimage_busproc (ide_drive_t * drive, int state)
{
ide_hwif_t *hwif = HWIF(drive);
u32 stat_config = 0;
unsigned long addr = siimage_selreg(hwif, 0);
if (hwif->mmio) {
stat_config = hwif->INL(SELADDR(0));
stat_config = hwif->INL(addr);
} else
pci_read_config_dword(hwif->pci_dev, SELREG(0), &stat_config);
pci_read_config_dword(hwif->pci_dev, addr, &stat_config);
switch (state) {
case BUSSTATE_ON:
......@@ -417,12 +659,20 @@ static int siimage_busproc (ide_drive_t * drive, int state)
hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
break;
default:
return 0;
return -EINVAL;
}
hwif->bus_state = state;
return 0;
}
/**
* siimage_reset_poll - wait for sata reset
* @drive: drive we are resetting
*
* Poll the SATA phy and see whether it has come back from the dead
* yet.
*/
static int siimage_reset_poll (ide_drive_t *drive)
{
if (SATA_STATUS_REG) {
......@@ -432,13 +682,7 @@ static int siimage_reset_poll (ide_drive_t *drive)
printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
hwif->name, hwif->INL(SATA_STATUS_REG));
HWGROUP(drive)->poll_timeout = 0;
#if 0
drive->failures++;
return ide_stopped;
#else
return ide_started;
#endif
return 1;
}
return 0;
} else {
......@@ -446,34 +690,53 @@ static int siimage_reset_poll (ide_drive_t *drive)
}
}
/**
* siimage_pre_reset - reset hook
* @drive: IDE device being reset
*
* For the SATA devices we need to handle recalibration/geometry
* differently
*/
static void siimage_pre_reset (ide_drive_t *drive)
{
if (drive->media != ide_disk)
return;
if (HWIF(drive)->pci_dev->device == PCI_DEVICE_ID_SII_3112) {
if (is_sata(HWIF(drive)))
{
drive->special.b.set_geometry = 0;
drive->special.b.recalibrate = 0;
}
}
/**
* siimage_reset - reset a device on an siimage controller
* @drive: drive to reset
*
* Perform a controller level reset fo the device. For
* SATA we must also check the PHY.
*/
static void siimage_reset (ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u8 reset = 0;
unsigned long addr = siimage_selreg(hwif, 0);
if (hwif->mmio) {
reset = hwif->INB(SELADDR(0));
hwif->OUTB((reset|0x03), SELADDR(0));
reset = hwif->INB(addr);
hwif->OUTB((reset|0x03), addr);
/* FIXME:posting */
udelay(25);
hwif->OUTB(reset, SELADDR(0));
(void) hwif->INB(SELADDR(0));
hwif->OUTB(reset, addr);
(void) hwif->INB(addr);
} else {
pci_read_config_byte(hwif->pci_dev, SELREG(0), &reset);
pci_write_config_byte(hwif->pci_dev, SELREG(0), reset|0x03);
pci_read_config_byte(hwif->pci_dev, addr, &reset);
pci_write_config_byte(hwif->pci_dev, addr, reset|0x03);
udelay(25);
pci_write_config_byte(hwif->pci_dev, SELREG(0), reset);
pci_read_config_byte(hwif->pci_dev, SELREG(0), &reset);
pci_write_config_byte(hwif->pci_dev, addr, reset);
pci_read_config_byte(hwif->pci_dev, addr, &reset);
}
if (SATA_STATUS_REG) {
......@@ -489,20 +752,28 @@ static void siimage_reset (ide_drive_t *drive)
}
/**
* proc_reports_siimage - add siimage controller to proc
* @dev: PCI device
* @clocking: SCSC value
* @name: controller name
*
* Report the clocking mode of the controller and add it to
* the /proc interface layer
*/
static void proc_reports_siimage (struct pci_dev *dev, u8 clocking, const char *name)
{
if (dev->device == PCI_DEVICE_ID_SII_3112)
if(pdev_is_sata(dev))
goto sata_skip;
printk(KERN_INFO "%s: BASE CLOCK ", name);
clocking &= ~0x0C;
clocking &= 0x03;
switch(clocking) {
case 0x03: printk("DISABLED !\n"); break;
case 0x02: printk("== 2X PCI \n"); break;
case 0x01: printk("== 133 \n"); break;
case 0x00: printk("== 100 \n"); break;
default:
BUG();
}
sata_skip:
......@@ -517,75 +788,108 @@ static void proc_reports_siimage (struct pci_dev *dev, u8 clocking, const char *
#endif /* DISPLAY_SIIMAGE_TIMINGS && CONFIG_PROC_FS */
}
/**
* setup_mmio_siimage - switch an SI controller into MMIO
* @dev: PCI device we are configuring
* @name: device name
*
* Attempt to put the device into mmio mode. There are some slight
* complications here with certain systems where the mmio bar isnt
* mapped so we have to be sure we can fall back to I/O.
*/
static unsigned int setup_mmio_siimage (struct pci_dev *dev, const char *name)
{
unsigned long bar5 = pci_resource_start(dev, 5);
unsigned long end5 = pci_resource_end(dev, 5);
unsigned long barsize = pci_resource_len(dev, 5);
u8 tmpbyte = 0;
unsigned long addr;
void *ioaddr;
ioaddr = ioremap_nocache(bar5, (end5 - bar5));
/*
* Drop back to PIO if we can't map the mmio. Some
* systems seem to get terminally confused in the PCI
* spaces.
*/
if(!request_mem_region(bar5, barsize, name))
{
printk(KERN_WARNING "siimage: IDE controller MMIO ports not available.\n");
return 0;
}
ioaddr = ioremap(bar5, barsize);
if (ioaddr == NULL)
{
release_mem_region(bar5, barsize);
return 0;
}
pci_set_master(dev);
pci_set_drvdata(dev, ioaddr);
addr = (unsigned long) ioaddr;
if (dev->device == PCI_DEVICE_ID_SII_3112) {
writel(0, DEVADDR(0x148));
writel(0, DEVADDR(0x1C8));
if (pdev_is_sata(dev)) {
writel(0, addr + 0x148);
writel(0, addr + 0x1C8);
}
writeb(0, DEVADDR(0xB4));
writeb(0, DEVADDR(0xF4));
tmpbyte = readb(DEVADDR(0x4A));
writeb(0, addr + 0xB4);
writeb(0, addr + 0xF4);
tmpbyte = readb(addr + 0x4A);
switch(tmpbyte) {
case 0x01:
writeb(tmpbyte|0x10, DEVADDR(0x4A));
tmpbyte = readb(DEVADDR(0x4A));
case 0x31:
/* if clocking is disabled */
/* 133 clock attempt to force it on */
writeb(tmpbyte & ~0x20, DEVADDR(0x4A));
tmpbyte = readb(DEVADDR(0x4A));
case 0x11:
case 0x21:
switch(tmpbyte & 0x30) {
case 0x00:
/* In 100 MHz clocking, try and switch to 133 */
writeb(tmpbyte|0x10, addr + 0x4A);
break;
default:
tmpbyte &= ~0x30;
tmpbyte |= 0x20;
writeb(tmpbyte, DEVADDR(0x4A));
case 0x10:
/* On 133Mhz clocking */
break;
case 0x20:
/* On PCIx2 clocking */
break;
case 0x30:
/* Clocking is disabled */
/* 133 clock attempt to force it on */
writeb(tmpbyte & ~0x20, addr + 0x4A);
break;
}
writeb(0x72, DEVADDR(0xA1));
writew(0x328A, DEVADDR(0xA2));
writel(0x62DD62DD, DEVADDR(0xA4));
writel(0x43924392, DEVADDR(0xA8));
writel(0x40094009, DEVADDR(0xAC));
writeb(0x72, DEVADDR(0xE1));
writew(0x328A, DEVADDR(0xE2));
writel(0x62DD62DD, DEVADDR(0xE4));
writel(0x43924392, DEVADDR(0xE8));
writel(0x40094009, DEVADDR(0xEC));
if (dev->device == PCI_DEVICE_ID_SII_3112) {
writel(0xFFFF0000, DEVADDR(0x108));
writel(0xFFFF0000, DEVADDR(0x188));
writel(0x00680000, DEVADDR(0x148));
writel(0x00680000, DEVADDR(0x1C8));
writeb( 0x72, addr + 0xA1);
writew( 0x328A, addr + 0xA2);
writel(0x62DD62DD, addr + 0xA4);
writel(0x43924392, addr + 0xA8);
writel(0x40094009, addr + 0xAC);
writeb( 0x72, addr + 0xE1);
writew( 0x328A, addr + 0xE2);
writel(0x62DD62DD, addr + 0xE4);
writel(0x43924392, addr + 0xE8);
writel(0x40094009, addr + 0xEC);
if (pdev_is_sata(dev)) {
writel(0xFFFF0000, addr + 0x108);
writel(0xFFFF0000, addr + 0x188);
writel(0x00680000, addr + 0x148);
writel(0x00680000, addr + 0x1C8);
}
tmpbyte = readb(DEVADDR(0x4A));
tmpbyte = readb(addr + 0x4A);
proc_reports_siimage(dev, (tmpbyte>>=4), name);
proc_reports_siimage(dev, (tmpbyte>>4), name);
return 1;
}
/**
* init_chipset_siimage - set up an SI device
* @dev: PCI device
* @name: device name
*
* Perform the initial PCI set up for this device. Attempt to switch
* to 133MHz clocking if the system isn't already set up to do it.
*/
static unsigned int __init init_chipset_siimage (struct pci_dev *dev, const char *name)
{
u32 class_rev = 0;
......@@ -606,139 +910,150 @@ static unsigned int __init init_chipset_siimage (struct pci_dev *dev, const char
pci_write_config_byte(dev, 0x80, 0x00);
pci_write_config_byte(dev, 0x84, 0x00);
pci_read_config_byte(dev, 0x8A, &tmpbyte);
switch(tmpbyte) {
switch(tmpbyte & 0x30) {
case 0x00:
case 0x01:
/* 133 clock attempt to force it on */
pci_write_config_byte(dev, 0x8A, tmpbyte|0x10);
pci_read_config_byte(dev, 0x8A, &tmpbyte);
case 0x30:
case 0x31:
/* if clocking is disabled */
/* 133 clock attempt to force it on */
pci_write_config_byte(dev, 0x8A, tmpbyte & ~0x20);
pci_read_config_byte(dev, 0x8A, &tmpbyte);
case 0x10:
case 0x11:
case 0x20:
case 0x21:
/* 133 already */
break;
default:
tmpbyte &= ~0x30;
tmpbyte |= 0x20;
pci_write_config_byte(dev, 0x8A, tmpbyte);
case 0x20:
/* BIOS set PCI x2 clocking */
break;
}
pci_read_config_byte(dev, 0x8A, &tmpbyte);
pci_write_config_byte(dev, 0xA1, 0x72);
pci_write_config_word(dev, 0xA2, 0x328A);
pci_read_config_byte(dev, 0x8A, &tmpbyte);
pci_write_config_byte(dev, 0xA1, 0x72);
pci_write_config_word(dev, 0xA2, 0x328A);
pci_write_config_dword(dev, 0xA4, 0x62DD62DD);
pci_write_config_dword(dev, 0xA8, 0x43924392);
pci_write_config_dword(dev, 0xAC, 0x40094009);
pci_write_config_byte(dev, 0xB1, 0x72);
pci_write_config_word(dev, 0xB2, 0x328A);
pci_write_config_byte(dev, 0xB1, 0x72);
pci_write_config_word(dev, 0xB2, 0x328A);
pci_write_config_dword(dev, 0xB4, 0x62DD62DD);
pci_write_config_dword(dev, 0xB8, 0x43924392);
pci_write_config_dword(dev, 0xBC, 0x40094009);
pci_read_config_byte(dev, 0x8A, &tmpbyte);
proc_reports_siimage(dev, (tmpbyte>>=4), name);
proc_reports_siimage(dev, (tmpbyte>>4), name);
return 0;
}
/**
* init_mmio_iops_siimage - set up the iops for MMIO
* @hwif: interface to set up
*
* The basic setup here is fairly simple, we can use standard MMIO
* operations. However we do have to set the taskfile register offsets
* by hand as there isnt a standard defined layout for them this
* time.
*
* The hardware supports buffered taskfiles and also some rather nice
* extended PRD tables. Unfortunately right now we don't.
*/
static void __init init_mmio_iops_siimage (ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
unsigned long addr = (unsigned long) pci_get_drvdata(hwif->pci_dev);
void *addr = pci_get_drvdata(dev);
u8 ch = hwif->channel;
// u16 i = 0;
hw_regs_t hw;
hw_regs_t hw;
unsigned long base;
/*
* Fill in the basic HWIF bits
*/
default_hwif_mmiops(hwif);
hwif->hwif_data = addr;
/*
* Now set up the hw. We have to do this ourselves as
* the MMIO layout isnt the same as the the standard port
* based I/O
*/
memset(&hw, 0, sizeof(hw_regs_t));
hw.priv = addr;
#if 1
#ifdef SIIMAGE_BUFFERED_TASKFILE
hw.io_ports[IDE_DATA_OFFSET] = DEVADDR((ch) ? 0xD0 : 0x90);
hw.io_ports[IDE_ERROR_OFFSET] = DEVADDR((ch) ? 0xD1 : 0x91);
hw.io_ports[IDE_NSECTOR_OFFSET] = DEVADDR((ch) ? 0xD2 : 0x92);
hw.io_ports[IDE_SECTOR_OFFSET] = DEVADDR((ch) ? 0xD3 : 0x93);
hw.io_ports[IDE_LCYL_OFFSET] = DEVADDR((ch) ? 0xD4 : 0x94);
hw.io_ports[IDE_HCYL_OFFSET] = DEVADDR((ch) ? 0xD5 : 0x95);
hw.io_ports[IDE_SELECT_OFFSET] = DEVADDR((ch) ? 0xD6 : 0x96);
hw.io_ports[IDE_STATUS_OFFSET] = DEVADDR((ch) ? 0xD7 : 0x97);
hw.io_ports[IDE_CONTROL_OFFSET] = DEVADDR((ch) ? 0xDA : 0x9A);
#else /* ! SIIMAGE_BUFFERED_TASKFILE */
hw.io_ports[IDE_DATA_OFFSET] = DEVADDR((ch) ? 0xC0 : 0x80);
hw.io_ports[IDE_ERROR_OFFSET] = DEVADDR((ch) ? 0xC1 : 0x81);
hw.io_ports[IDE_NSECTOR_OFFSET] = DEVADDR((ch) ? 0xC2 : 0x82);
hw.io_ports[IDE_SECTOR_OFFSET] = DEVADDR((ch) ? 0xC3 : 0x83);
hw.io_ports[IDE_LCYL_OFFSET] = DEVADDR((ch) ? 0xC4 : 0x84);
hw.io_ports[IDE_HCYL_OFFSET] = DEVADDR((ch) ? 0xC5 : 0x85);
hw.io_ports[IDE_SELECT_OFFSET] = DEVADDR((ch) ? 0xC6 : 0x86);
hw.io_ports[IDE_STATUS_OFFSET] = DEVADDR((ch) ? 0xC7 : 0x87);
hw.io_ports[IDE_CONTROL_OFFSET] = DEVADDR((ch) ? 0xCA : 0x8A);
#endif /* SIIMAGE_BUFFERED_TASKFILE */
#else
#ifdef SIIMAGE_BUFFERED_TASKFILE
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
hw.io_ports[i] = DEVADDR((ch) ? 0xD0 : 0x90)|(i);
hw.io_ports[IDE_CONTROL_OFFSET] = DEVADDR((ch) ? 0xDA : 0x9A);
#else /* ! SIIMAGE_BUFFERED_TASKFILE */
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
hw.io_ports[i] = DEVADDR((ch) ? 0xC0 : 0x80)|(i);
hw.io_ports[IDE_CONTROL_OFFSET] = DEVADDR((ch) ? 0xCA : 0x8A);
#endif /* SIIMAGE_BUFFERED_TASKFILE */
#endif
#if 0
printk(KERN_DEBUG "%s: ", hwif->name);
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
printk("0x%08x ", DEVADDR((ch) ? 0xC0 : 0x80)|(i));
printk("0x%08x ", DEVADDR((ch) ? 0xCA : 0x8A)|(i));
#endif
base = (unsigned long)addr;
if(ch)
base += 0xC0;
else
base += 0x80;
/*
* The buffered task file doesn't have status/control
* so we can't currently use it sanely since we want to
* use LBA48 mode.
*/
// base += 0x10;
// hwif->no_lba48 = 1;
hw.io_ports[IDE_DATA_OFFSET] = base;
hw.io_ports[IDE_ERROR_OFFSET] = base + 1;
hw.io_ports[IDE_NSECTOR_OFFSET] = base + 2;
hw.io_ports[IDE_SECTOR_OFFSET] = base + 3;
hw.io_ports[IDE_LCYL_OFFSET] = base + 4;
hw.io_ports[IDE_HCYL_OFFSET] = base + 5;
hw.io_ports[IDE_SELECT_OFFSET] = base + 6;
hw.io_ports[IDE_STATUS_OFFSET] = base + 7;
hw.io_ports[IDE_CONTROL_OFFSET] = base + 10;
hw.io_ports[IDE_IRQ_OFFSET] = 0;
if (dev->device == PCI_DEVICE_ID_SII_3112) {
hw.sata_scr[SATA_STATUS_OFFSET] = DEVADDR((ch) ? 0x184 : 0x104);
hw.sata_scr[SATA_ERROR_OFFSET] = DEVADDR((ch) ? 0x188 : 0x108);
hw.sata_scr[SATA_CONTROL_OFFSET]= DEVADDR((ch) ? 0x180 : 0x100);
hw.sata_misc[SATA_MISC_OFFSET] = DEVADDR((ch) ? 0x1C0 : 0x140);
hw.sata_misc[SATA_PHY_OFFSET] = DEVADDR((ch) ? 0x1C4 : 0x144);
hw.sata_misc[SATA_IEN_OFFSET] = DEVADDR((ch) ? 0x1C8 : 0x148);
if (pdev_is_sata(dev)) {
base = (unsigned long) addr;
if(ch)
base += 0x80;
hw.sata_scr[SATA_STATUS_OFFSET] = base + 0x104;
hw.sata_scr[SATA_ERROR_OFFSET] = base + 0x108;
hw.sata_scr[SATA_CONTROL_OFFSET]= base + 0x100;
hw.sata_misc[SATA_MISC_OFFSET] = base + 0x140;
hw.sata_misc[SATA_PHY_OFFSET] = base + 0x144;
hw.sata_misc[SATA_IEN_OFFSET] = base + 0x148;
}
hw.priv = (void *) addr;
// hw.priv = pci_get_drvdata(hwif->pci_dev);
hw.irq = hwif->pci_dev->irq;
memcpy(&hwif->hw, &hw, sizeof(hw));
memcpy(hwif->io_ports, hwif->hw.io_ports, sizeof(hwif->hw.io_ports));
if (hwif->pci_dev->device == PCI_DEVICE_ID_SII_3112) {
if (is_sata(hwif)) {
memcpy(hwif->sata_scr, hwif->hw.sata_scr, sizeof(hwif->hw.sata_scr));
memcpy(hwif->sata_misc, hwif->hw.sata_misc, sizeof(hwif->hw.sata_misc));
}
#ifdef SIIMAGE_BUFFERED_TASKFILE
hwif->no_lba48 = 1;
#endif /* SIIMAGE_BUFFERED_TASKFILE */
hwif->irq = hw.irq;
hwif->hwif_data = pci_get_drvdata(hwif->pci_dev);
base = (unsigned long) addr;
#ifdef SIIMAGE_LARGE_DMA
hwif->dma_base = DEVADDR((ch) ? 0x18 : 0x10);
hwif->dma_base2 = DEVADDR((ch) ? 0x08 : 0x00);
hwif->dma_prdtable = (hwif->dma_base2 + 4);
/* Watch the brackets - even Ken and Dennis get some language design wrong */
hwif->dma_base = base + (ch ? 0x18 : 0x10);
hwif->dma_base2 = base + (ch ? 0x08 : 0x00);
hwif->dma_prdtable = hwif->dma_base2 + 4;
#else /* ! SIIMAGE_LARGE_DMA */
hwif->dma_base = DEVADDR((ch) ? 0x08 : 0x00);
hwif->dma_base2 = DEVADDR((ch) ? 0x18 : 0x10);
hwif->dma_base = base + (ch ? 0x08 : 0x00);
hwif->dma_base2 = base + (ch ? 0x18 : 0x10);
#endif /* SIIMAGE_LARGE_DMA */
hwif->mmio = 1;
hwif->mmio = 2;
}
/**
* init_iops_siimage - set up iops
* @hwif: interface to set up
*
* Do the basic setup for the SIIMAGE hardware interface
* and then do the MMIO setup if we can. This is the first
* look in we get for setting up the hwif so that we
* can get the iops right before using them.
*/
static void __init init_iops_siimage (ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
......@@ -746,37 +1061,60 @@ static void __init init_iops_siimage (ide_hwif_t *hwif)
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
class_rev &= 0xff;
hwif->hwif_data = 0;
hwif->rqsize = 128;
if ((dev->device == PCI_DEVICE_ID_SII_3112) && (!(class_rev)))
hwif->rqsize = 16;
if (is_sata(hwif))
hwif->rqsize = 15;
if (pci_get_drvdata(dev) == NULL)
return;
init_mmio_iops_siimage(hwif);
}
/**
* ata66_siimage - check for 80 pin cable
* @hwif: interface to check
*
* Check for the presence of an ATA66 capable cable on the
* interface.
*/
static unsigned int __init ata66_siimage (ide_hwif_t *hwif)
{
unsigned long addr = siimage_selreg(hwif, 0);
if (pci_get_drvdata(hwif->pci_dev) == NULL) {
u8 ata66 = 0;
pci_read_config_byte(hwif->pci_dev, SELREG(0), &ata66);
pci_read_config_byte(hwif->pci_dev, addr, &ata66);
return (ata66 & 0x01) ? 1 : 0;
}
return (hwif->INB(SELADDR(0)) & 0x01) ? 1 : 0;
return (hwif->INB(addr) & 0x01) ? 1 : 0;
}
/**
* init_hwif_siimage - set up hwif structs
* @hwif: interface to set up
*
* We do the basic set up of the interface structure. The SIIMAGE
* requires several custom handlers so we override the default
* ide DMA handlers appropriately
*/
static void __init init_hwif_siimage (ide_hwif_t *hwif)
{
hwif->autodma = 0;
hwif->busproc = &siimage_busproc;
hwif->resetproc = &siimage_reset;
hwif->speedproc = &siimage_tune_chipset;
hwif->tuneproc = &siimage_tuneproc;
hwif->reset_poll = &siimage_reset_poll;
hwif->pre_reset = &siimage_pre_reset;
if(is_sata(hwif))
hwif->busproc = &siimage_busproc;
if (!hwif->dma_base) {
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
......@@ -787,7 +1125,7 @@ static void __init init_hwif_siimage (ide_hwif_t *hwif)
hwif->mwdma_mask = 0x07;
hwif->swdma_mask = 0x07;
if (hwif->pci_dev->device != PCI_DEVICE_ID_SII_3112)
if (!is_sata(hwif))
hwif->atapi_dma = 1;
hwif->ide_dma_check = &siimage_config_drive_for_dma;
......@@ -801,12 +1139,26 @@ static void __init init_hwif_siimage (ide_hwif_t *hwif)
} else {
hwif->ide_dma_test_irq = & siimage_io_ide_dma_test_irq;
}
if (!noautodma)
hwif->autodma = 1;
/*
* The BIOS often doesn't set up DMA on this controller
* so we always do it.
*/
hwif->autodma = 1;
hwif->drives[0].autodma = hwif->autodma;
hwif->drives[1].autodma = hwif->autodma;
}
/**
* init_dma_siimage - set up IDE DMA
* @hwif: interface
* @dmabase: DMA base address to use
*
* For the SI chips this requires no special set up so we can just
* let the IDE DMA core do the usual work.
*/
static void __init init_dma_siimage (ide_hwif_t *hwif, unsigned long dmabase)
{
ide_setup_dma(hwif, dmabase, 8);
......@@ -815,6 +1167,15 @@ static void __init init_dma_siimage (ide_hwif_t *hwif, unsigned long dmabase)
extern void ide_setup_pci_device(struct pci_dev *, ide_pci_device_t *);
/**
* siimage_init_one - pci layer discovery entry
* @dev: PCI device
* @id: ident table entry
*
* Called by the PCI code when it finds an SI680 or SI3112 controller.
* We then use the IDE PCI generic helper to do most of the work.
*/
static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
ide_pci_device_t *d = &siimage_chipsets[id->driver_data];
......@@ -828,6 +1189,7 @@ static int __devinit siimage_init_one(struct pci_dev *dev, const struct pci_devi
static struct pci_device_id siimage_pci_tbl[] = {
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_3112, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
{ PCI_VENDOR_ID_CMD, PCI_DEVICE_ID_SII_1210SA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
{ 0, },
};
......@@ -850,6 +1212,6 @@ static void siimage_ide_exit(void)
module_init(siimage_ide_init);
module_exit(siimage_ide_exit);
MODULE_AUTHOR("Andre Hedrick");
MODULE_AUTHOR("Andre Hedrick, Alan Cox");
MODULE_DESCRIPTION("PCI driver module for SiI IDE");
MODULE_LICENSE("GPL");
drivers/ide/pci/siimage.h
View file @ d964d911
......@@ -13,12 +13,6 @@
#undef SIIMAGE_BUFFERED_TASKFILE
#undef SIIMAGE_LARGE_DMA
#if 0
typedef struct ide_io_ops_s siimage_iops {
}
#endif
#define SII_DEBUG 0
#if SII_DEBUG
......@@ -27,12 +21,6 @@ typedef struct ide_io_ops_s siimage_iops {
#define siiprintk(x...)
#endif
#define ADJREG(B,R) ((B)|(R)|((hwif->channel)<<(4+(2*(hwif->mmio)))))
#define SELREG(R) ADJREG((0xA0),(R))
#define SELADDR(R) ((((unsigned long)hwif->hwif_data)*(hwif->mmio))|SELREG((R)))
#define HWIFADDR(R) ((((unsigned long)hwif->hwif_data)*(hwif->mmio))|(R))
#define DEVADDR(R) (((unsigned long) pci_get_drvdata(dev))|(R))
#if defined(DISPLAY_SIIMAGE_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
......@@ -85,6 +73,19 @@ static ide_pci_device_t siimage_chipsets[] __devinitdata = {
.enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}},
.bootable = ON_BOARD,
.extra = 0,
},{ /* 2 */
.vendor = PCI_VENDOR_ID_CMD,
.device = PCI_DEVICE_ID_SII_1210SA,
.name = "Adaptec AAR-1210SA",
.init_chipset = init_chipset_siimage,
.init_iops = init_iops_siimage,
.init_hwif = init_hwif_siimage,
.init_dma = init_dma_siimage,
.channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x00,0x00,0x00}, {0x00,0x00,0x00}},
.bootable = ON_BOARD,
.extra = 0,
},{
.vendor = 0,
.device = 0,
......
include/linux/pci_ids.h
View file @ d964d911
......@@ -878,6 +878,7 @@
#define PCI_DEVICE_ID_SII_680 0x0680
#define PCI_DEVICE_ID_SII_3112 0x3112
#define PCI_DEVICE_ID_SII_1210SA 0x0240
#define PCI_VENDOR_ID_VISION 0x1098
#define PCI_DEVICE_ID_VISION_QD8500 0x0001
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7