Merge branch 'bnx2x-Fix-malicious-VFs-indication'

Yuval Mintz says:

====================
bnx2x: Fix malicious VFs indication

It was discovered that for a VF there's a simple [yet uncommon] scenario
which would cause device firmware to declare that VF as malicious -
Add a vlan interface on top of a VF and disable txvlan offloading for
that VF [causing VF to transmit packets where vlan is on payload].

Patch #1 corrects driver transmission to prevent this issue.
Patch #2 is a by-product correcting PF behavior once a VF is declared
malicious.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c

@@ -3883,15 +3883,26 @@ netdev_tx_t bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		/* when transmitting in a vf, start bd must hold the ethertype
 		 * for fw to enforce it
 		 */
+		u16 vlan_tci = 0;
 #ifndef BNX2X_STOP_ON_ERROR
-		if (IS_VF(bp))
+		if (IS_VF(bp)) {
 #endif
+			/* Still need to consider inband vlan for enforced */
+			if (__vlan_get_tag(skb, &vlan_tci)) {
 				tx_start_bd->vlan_or_ethertype =
 					cpu_to_le16(ntohs(eth->h_proto));
+			} else {
+				tx_start_bd->bd_flags.as_bitfield |=
+					(X_ETH_INBAND_VLAN <<
+					 ETH_TX_BD_FLAGS_VLAN_MODE_SHIFT);
+				tx_start_bd->vlan_or_ethertype =
+					cpu_to_le16(vlan_tci);
+			}
 #ifndef BNX2X_STOP_ON_ERROR
-		else
+		} else {
 			/* used by FW for packet accounting */
 			tx_start_bd->vlan_or_ethertype = cpu_to_le16(pkt_prod);
+		}
 #endif
 	}
 

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c

@@ -901,6 +901,8 @@ static void bnx2x_vf_flr(struct bnx2x *bp, struct bnx2x_virtf *vf)
 	/* release VF resources */
 	bnx2x_vf_free_resc(bp, vf);
 
+	vf->malicious = false;
+
 	/* re-open the mailbox */
 	bnx2x_vf_enable_mbx(bp, vf->abs_vfid);
 	return;
@@ -1822,9 +1824,11 @@ int bnx2x_iov_eq_sp_event(struct bnx2x *bp, union event_ring_elem *elem)
 		   vf->abs_vfid, qidx);
 		bnx2x_vf_handle_rss_update_eqe(bp, vf);
 	case EVENT_RING_OPCODE_VF_FLR:
-	case EVENT_RING_OPCODE_MALICIOUS_VF:
 		/* Do nothing for now */
 		return 0;
+	case EVENT_RING_OPCODE_MALICIOUS_VF:
+		vf->malicious = true;
+		return 0;
 	}
 
 	return 0;
@@ -1905,6 +1909,13 @@ void bnx2x_iov_adjust_stats_req(struct bnx2x *bp)
 			continue;
 		}
 
+		if (vf->malicious) {
+			DP_AND((BNX2X_MSG_IOV | BNX2X_MSG_STATS),
+			       "vf %d malicious so no stats for it\n",
+			       vf->abs_vfid);
+			continue;
+		}
+
 		DP_AND((BNX2X_MSG_IOV | BNX2X_MSG_STATS),
 		       "add addresses for vf %d\n", vf->abs_vfid);
 		for_each_vfq(vf, j) {

drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h

@@ -141,6 +141,7 @@ struct bnx2x_virtf {
 #define VF_RESET	3	/* VF FLR'd, pending cleanup */
 
 	bool flr_clnup_stage;	/* true during flr cleanup */
+	bool malicious;		/* true if FW indicated so, until FLR */
 
 	/* dma */
 	dma_addr_t fw_stat_map;