Commit d9cc193c authored by Oleksij Rempel's avatar Oleksij Rempel Committed by David S. Miller

dt-bindings: net: phy: Add support for NXP TJA11xx

Document the NXP TJA11xx PHY bindings.
Signed-off-by: default avatarOleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d0f0c55e
# SPDX-License-Identifier: GPL-2.0+
%YAML 1.2
---
$id: http://devicetree.org/schemas/net/nxp,tja11xx.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: NXP TJA11xx PHY
maintainers:
- Andrew Lunn <andrew@lunn.ch>
- Florian Fainelli <f.fainelli@gmail.com>
- Heiner Kallweit <hkallweit1@gmail.com>
description:
Bindings for NXP TJA11xx automotive PHYs
allOf:
- $ref: ethernet-phy.yaml#
patternProperties:
"^ethernet-phy@[0-9a-f]+$":
type: object
description: |
Some packages have multiple PHYs. Secondary PHY should be defines as
subnode of the first (parent) PHY.
properties:
reg:
minimum: 0
maximum: 31
description:
The ID number for the child PHY. Should be +1 of parent PHY.
required:
- reg
examples:
- |
mdio {
#address-cells = <1>;
#size-cells = <0>;
tja1101_phy0: ethernet-phy@4 {
reg = <0x4>;
};
};
- |
mdio {
#address-cells = <1>;
#size-cells = <0>;
tja1102_phy0: ethernet-phy@4 {
reg = <0x4>;
#address-cells = <1>;
#size-cells = <0>;
tja1102_phy1: ethernet-phy@5 {
reg = <0x5>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment