Merge tag 'mfd-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next

Pull MFD updates from Samuel Ortiz:
 "For the 3.13 merge window we have a couple of new drivers for the AMS
  AS3722 PMIC and for STMicroelectronics STw481x PMIC.

  Although this is a smaller update than usual, we also have:

   - Device tree support for the max77693 driver

   - linux/of.h inclusion for all DT compatible MFD drivers, to avoid
     build breakage in the future

   - Support for Intel Wildcat Point-LP PCH through the lpc_ich driver

   - A small arizona update for new wm5110 DSP registers and a few fixes

   - A small palmas update as well, including an of_device table
     addition and a few minor fixes

   - Two small mfd-core changes, one including a memory leak fix for
     when mfd_add_device() fails

   - Our usual round of minor cleanups and janitorial fixes"

* tag 'mfd-3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (63 commits)
  Documentation: mfd: Update s2mps11.txt
  mfd: pm8921: Potential NULL dereference in pm8921_remove()
  mfd: Fix memory leak in mfd_add_devices()
  mfd: Stop setting refcounting pointers in original mfd_cell arrays
  mfd: wm5110: Enable micd clamp functionality
  mfd: lpc_ich: Add Device IDs for Intel Wildcat Point-LP PCH
  mfd: max77693: Fix up bug of wrong interrupt number
  mfd: as3722: Don't export the regmap config
  mfd: twl6040: Remove obsolete cleanup for i2c clientdata
  mfd: tps65910: Remove warning during dt node parsing
  mfd: lpc_sch: Ignore resource conflicts when adding mfd cells
  mfd: ti_am335x_tscadc: Avoid possible deadlock of reg_lock
  mfd: syscon: Return -ENOSYS if CONFIG_MFD_SYSCON is not enabled
  mfd: Add support for ams AS3722 PMIC
  mfd: max77693: Include linux/of.h header
  mfd: tc3589x: Detect the precise version
  mfd: omap-usb: prepare/unprepare clock while enable/disable
  mfd: max77686: Include linux/of.h header
  mfd: max8907: Include linux/of.h header
  mfd: max8997: Include linux/of.h header
  ...

Documentation/devicetree/bindings/mfd/as3722.txt

+* ams AS3722 Power management IC.
+
+Required properties:
+-------------------
+- compatible: Must be "ams,as3722".
+- reg: I2C device address.
+- interrupt-controller: AS3722 has internal interrupt controller which takes the
+  interrupt request from internal sub-blocks like RTC, regulators, GPIOs as well
+  as external input.
+- #interrupt-cells: Should be set to 2 for IRQ number and flags.
+  The first cell is the IRQ number. IRQ numbers for different interrupt source
+  of AS3722 are defined at dt-bindings/mfd/as3722.h
+  The second cell is the flags, encoded as the trigger masks from binding document
+	interrupts.txt, using dt-bindings/irq.
+
+Optional submodule and their properties:
+=======================================
+
+Pinmux and GPIO:
+===============
+Device has 8 GPIO pins which can be configured as GPIO as well as the special IO
+functions.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+Following are properties which is needed if GPIO and pinmux functionality
+is required:
+    Required properties:
+    -------------------
+	- gpio-controller: Marks the device node as a GPIO controller.
+	- #gpio-cells: Number of GPIO cells. Refer to binding document
+			gpio/gpio.txt
+
+    Optional properties:
+    --------------------
+	Following properties are require if pin control setting is required
+	at boot.
+	- pinctrl-names: A pinctrl state named "default" be defined, using the
+		bindings in pinctrl/pinctrl-binding.txt.
+	- pinctrl[0...n]: Properties to contain the phandle that refer to
+		different nodes of pin control settings. These nodes represents
+		the pin control setting of state 0 to state n. Each of these
+		nodes contains different subnodes to represents some desired
+		configuration for a list of pins. This configuration can
+		include the mux function to select on those pin(s), and
+		various pin configuration parameters, such as pull-up,
+		open drain.
+
+		Each subnode have following properties:
+		Required properties:
+		    - pins: List of pins. Valid values of pins properties are:
+				gpio0, gpio1, gpio2, gpio3, gpio4, gpio5,
+				gpio6, gpio7
+
+		Optional properties:
+			function, bias-disable, bias-pull-up, bias-pull-down,
+			bias-high-impedance, drive-open-drain.
+
+			Valid values for function properties are:
+				gpio, interrupt-out, gpio-in-interrupt,
+				vsup-vbat-low-undebounce-out,
+				vsup-vbat-low-debounce-out,
+				voltage-in-standby, oc-pg-sd0, oc-pg-sd6,
+				powergood-out, pwm-in, pwm-out, clk32k-out,
+				watchdog-in, soft-reset-in
+
+Regulators:
+===========
+Device has multiple DCDC and LDOs. The node "regulators" is require if regulator
+functionality is needed.
+
+Following are properties of regulator subnode.
+
+    Optional properties:
+    -------------------
+	The input supply of regulators are the optional properties on the
+	regulator node. The input supply of these regulators are provided
+	through following properties:
+		vsup-sd2-supply: Input supply for SD2.
+		vsup-sd3-supply: Input supply for SD3.
+		vsup-sd4-supply: Input supply for SD4.
+		vsup-sd5-supply: Input supply for SD5.
+		vin-ldo0-supply: Input supply for LDO0.
+		vin-ldo1-6-supply: Input supply for LDO1 and LDO6.
+		vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7.
+		vin-ldo3-4-supply: Input supply for LDO3 and LDO4.
+		vin-ldo9-10-supply: Input supply for LDO9 and LDO10.
+		vin-ldo11-supply: Input supply for LDO11.
+
+    Optional sub nodes for regulators:
+    ---------------------------------
+	The subnodes name is the name of regulator and it must be one of:
+	sd[0-6], ldo[0-7], ldo[9-11]
+
+	Each sub-node should contain the constraints and initialization
+	information for that regulator. See regulator.txt for a description
+	of standard properties for these sub-nodes.
+	Additional optional custom properties  are listed below.
+		ams,ext-control: External control of the rail. The option of
+			this properties will tell which external input is
+			controlling this rail. Valid values are 0, 1, 2 ad 3.
+			0: There is no external control of this rail.
+			1: Rail is controlled by ENABLE1 input pin.
+			2: Rail is controlled by ENABLE2 input pin.
+			3: Rail is controlled by ENABLE3 input pin.
+			Missing this property on DT will be assume as no
+			external control. The external control pin macros
+			are defined @dt-bindings/mfd/as3722.h
+
+		ams,enable-tracking: Enable tracking with SD1, only supported
+			by LDO3.
+
+Example:
+--------
+#include <dt-bindings/mfd/as3722.h>
+...
+ams3722 {
+	compatible = "ams,as3722";
+	reg = <0x48>;
+
+	interrupt-parent = <&intc>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	gpio-controller;
+	#gpio-cells = <2>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&as3722_default>;
+
+	as3722_default: pinmux {
+			gpio0 {
+				pins = "gpio0";
+				function = "gpio";
+				bias-pull-down;
+			};
+
+			gpio1_2_4_7 {
+				pins = "gpio1", "gpio2", "gpio4", "gpio7";
+				function = "gpio";
+				bias-pull-up;
+			};
+
+			gpio5 {
+				pins = "gpio5";
+				function = "clk32k_out";
+			};
+	}
+
+	regulators {
+			vsup-sd2-supply = <...>;
+			...
+
+			sd0 {
+				regulator-name = "vdd_cpu";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				ams,ext-control = <2>;
+			};
+
+			sd1 {
+				regulator-name = "vdd_core";
+				regulator-min-microvolt = <700000>;
+				regulator-max-microvolt = <1400000>;
+				regulator-always-on;
+				ams,ext-control = <1>;
+			};
+
+			sd2 {
+				regulator-name = "vddio_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+			};
+
+			sd4 {
+				regulator-name = "avdd-hdmi-pex";
+				regulator-min-microvolt = <1050000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-always-on;
+			};
+
+			sd5 {
+				regulator-name = "vdd-1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+			....
+	};
+};

Documentation/devicetree/bindings/mfd/s2mps11.txt

 
 * Samsung S2MPS11 Voltage and Current Regulator
 
-The Samsung S2MP211 is a multi-function device which includes voltage and
+The Samsung S2MPS11 is a multi-function device which includes voltage and
 current regulators, RTC, charger controller and other sub-blocks. It is
-interfaced to the host controller using a I2C interface. Each sub-block is
-addressed by the host system using different I2C slave address.
+interfaced to the host controller using an I2C interface. Each sub-block is
+addressed by the host system using different I2C slave addresses.
 
 Required properties:
 - compatible: Should be "samsung,s2mps11-pmic".
@@ -43,7 +43,8 @@ sub-node should be of the format as listed below.
 
  BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explictly
  regulator-ramp-delay = <0> can be used for them to disable ramp delay.
- In absence of regulator-ramp-delay property, default ramp delay will be used.
+ In the absence of the regulator-ramp-delay property, the default ramp
+ delay will be used.
 
 NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value will be set
 for a particular group of BUCKs. So provide same regulator-ramp-delay<value>.
@@ -58,10 +59,10 @@ supports. Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
 as per the datasheet of s2mps11.
 
 	- LDOn
-		  - valid values for n are 1 to 28
+		  - valid values for n are 1 to 38
 		  - Example: LDO0, LD01, LDO28
 	- BUCKn
-		  - valid values for n are 1 to 9.
+		  - valid values for n are 1 to 10.
 		  - Example: BUCK1, BUCK2, BUCK9
 
 Example:

drivers/mfd/88pm860x-core.c

@@ -1247,7 +1247,7 @@ static struct i2c_driver pm860x_driver = {
 		.name	= "88PM860x",
 		.owner	= THIS_MODULE,
 		.pm     = &pm860x_pm_ops,
-		.of_match_table	= of_match_ptr(pm860x_dt_ids),
+		.of_match_table	= pm860x_dt_ids,
 	},
 	.probe		= pm860x_probe,
 	.remove		= pm860x_remove,

drivers/mfd/Kconfig

@@ -27,6 +27,18 @@ config MFD_AS3711
 	help
 	  Support for the AS3711 PMIC from AMS
 
+config MFD_AS3722
+	bool "ams AS3722 Power Management IC"
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	depends on I2C && OF
+	help
+	  The ams AS3722 is a compact system PMU suitable for mobile phones,
+	  tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
+	  controllers, 11 LDOs, RTC, automatic battery, temperature and
+	  over current monitoring, GPIOs, ADC and a watchdog.
+
 config PMIC_ADP5520
 	bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
 	depends on I2C=y
@@ -1151,6 +1163,16 @@ config MFD_WM8994
 	  core support for the WM8994, in order to use the actual
 	  functionaltiy of the device other drivers must be enabled.
 
+config MFD_STW481X
+	bool "Support for ST Microelectronics STw481x"
+	depends on I2C && ARCH_NOMADIK
+	select REGMAP_I2C
+	select MFD_CORE
+	help
+	  Select this option to enable the STw481x chip driver used
+	  in various ST Microelectronics and ST-Ericsson embedded
+	  Nomadik series.
+
 endmenu
 endif
 

drivers/mfd/Makefile

@@ -162,3 +162,5 @@ obj-$(CONFIG_MFD_LM3533)	+= lm3533-core.o lm3533-ctrlbank.o
 obj-$(CONFIG_VEXPRESS_CONFIG)	+= vexpress-config.o vexpress-sysreg.o
 obj-$(CONFIG_MFD_RETU)		+= retu-mfd.o
 obj-$(CONFIG_MFD_AS3711)	+= as3711.o
+obj-$(CONFIG_MFD_AS3722)	+= as3722.o
+obj-$(CONFIG_MFD_STW481X)	+= stw481x.o

drivers/mfd/aat2870-core.c

@@ -293,7 +293,7 @@ static ssize_t aat2870_reg_write_file(struct file *file,
 	unsigned long addr, val;
 	int ret;
 
-	buf_size = min(count, (sizeof(buf)-1));
+	buf_size = min(count, (size_t)(sizeof(buf)-1));
 	if (copy_from_user(buf, user_buf, buf_size)) {
 		dev_err(aat2870->dev, "Failed to copy from user\n");
 		return -EFAULT;

drivers/mfd/arizona-core.c

@@ -540,7 +540,7 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
 		for (i = 0; i < ARRAY_SIZE(arizona->pdata.gpio_defaults); i++) {
 			if (arizona->pdata.gpio_defaults[i] > 0xffff)
 				arizona->pdata.gpio_defaults[i] = 0;
-			if (arizona->pdata.gpio_defaults[i] == 0)
+			else if (arizona->pdata.gpio_defaults[i] == 0)
 				arizona->pdata.gpio_defaults[i] = 0x10000;
 		}
 	} else {
@@ -633,11 +633,11 @@ int arizona_dev_init(struct arizona *arizona)
 	dev_set_drvdata(arizona->dev, arizona);
 	mutex_init(&arizona->clk_lock);
 
-	arizona_of_get_core_pdata(arizona);
-
 	if (dev_get_platdata(arizona->dev))
 		memcpy(&arizona->pdata, dev_get_platdata(arizona->dev),
 		       sizeof(arizona->pdata));
+	else
+		arizona_of_get_core_pdata(arizona);
 
 	regcache_cache_only(arizona->regmap, true);
 

drivers/mfd/arizona-i2c.c

@@ -17,6 +17,7 @@
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 #include <linux/mfd/arizona/core.h>
 

drivers/mfd/arizona-spi.c

@@ -17,6 +17,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/spi/spi.h>
+#include <linux/of.h>
 
 #include <linux/mfd/arizona/core.h>
 

drivers/mfd/as3711.c

@@ -17,6 +17,7 @@
 #include <linux/mfd/as3711.h>
 #include <linux/mfd/core.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
 

drivers/mfd/da9052-i2c.c

@@ -86,7 +86,11 @@ static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
 	return 0;
 }
 
-static int da9052_i2c_enable_multiwrite(struct da9052 *da9052)
+/*
+ * According to errata item 24, multiwrite mode should be avoided
+ * in order to prevent register data corruption after power-down.
+ */
+static int da9052_i2c_disable_multiwrite(struct da9052 *da9052)
 {
 	int reg_val, ret;
 
@@ -94,8 +98,8 @@ static int da9052_i2c_enable_multiwrite(struct da9052 *da9052)
 	if (ret < 0)
 		return ret;
 
-	if (reg_val & DA9052_CONTROL_B_WRITEMODE) {
-		reg_val &= ~DA9052_CONTROL_B_WRITEMODE;
+	if (!(reg_val & DA9052_CONTROL_B_WRITEMODE)) {
+		reg_val |= DA9052_CONTROL_B_WRITEMODE;
 		ret = regmap_write(da9052->regmap, DA9052_CONTROL_B_REG,
 				   reg_val);
 		if (ret < 0)
@@ -154,7 +158,7 @@ static int da9052_i2c_probe(struct i2c_client *client,
 		return ret;
 	}
 
-	ret = da9052_i2c_enable_multiwrite(da9052);
+	ret = da9052_i2c_disable_multiwrite(da9052);
 	if (ret < 0)
 		return ret;
 

drivers/mfd/ezx-pcap.c

@@ -394,16 +394,12 @@ static int pcap_add_subdev(struct pcap_chip *pcap,
 static int ezx_pcap_remove(struct spi_device *spi)
 {
 	struct pcap_chip *pcap = spi_get_drvdata(spi);
-	struct pcap_platform_data *pdata = dev_get_platdata(&spi->dev);
-	int i, adc_irq;
+	int i;
 
 	/* remove all registered subdevs */
 	device_for_each_child(&spi->dev, NULL, pcap_remove_subdev);
 
 	/* cleanup ADC */
-	adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
-				PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
-	devm_free_irq(&spi->dev, adc_irq, pcap);
 	mutex_lock(&pcap->adc_mutex);
 	for (i = 0; i < PCAP_ADC_MAXQ; i++)
 		kfree(pcap->adc_queue[i]);
@@ -509,8 +505,6 @@ static int ezx_pcap_probe(struct spi_device *spi)
 
 remove_subdevs:
 	device_for_each_child(&spi->dev, NULL, pcap_remove_subdev);
-/* free_adc: */
-	devm_free_irq(&spi->dev, adc_irq, pcap);
 free_irqchip:
 	for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++)
 		irq_set_chip_and_handler(i, NULL, NULL);

drivers/mfd/lpc_ich.c

@@ -53,6 +53,7 @@
  *	document number TBD : Wellsburg
  *	document number TBD : Avoton SoC
  *	document number TBD : Coleto Creek
+ *	document number TBD : Wildcat Point-LP
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -211,6 +212,7 @@ enum lpc_chipsets {
 	LPC_WBG,	/* Wellsburg */
 	LPC_AVN,	/* Avoton SoC */
 	LPC_COLETO,	/* Coleto Creek */
+	LPC_WPT_LP,	/* Wildcat Point-LP */
 };
 
 static struct lpc_ich_info lpc_chipset_info[] = {
@@ -503,6 +505,10 @@ static struct lpc_ich_info lpc_chipset_info[] = {
 		.name = "Coleto Creek",
 		.iTCO_version = 2,
 	},
+	[LPC_WPT_LP] = {
+		.name = "Lynx Point_LP",
+		.iTCO_version = 2,
+	},
 };
 
 /*
@@ -721,6 +727,13 @@ static DEFINE_PCI_DEVICE_TABLE(lpc_ich_ids) = {
 	{ PCI_VDEVICE(INTEL, 0x1f3a), LPC_AVN},
 	{ PCI_VDEVICE(INTEL, 0x1f3b), LPC_AVN},
 	{ PCI_VDEVICE(INTEL, 0x2390), LPC_COLETO},
+	{ PCI_VDEVICE(INTEL, 0x9cc1), LPC_WPT_LP},
+	{ PCI_VDEVICE(INTEL, 0x9cc2), LPC_WPT_LP},
+	{ PCI_VDEVICE(INTEL, 0x9cc3), LPC_WPT_LP},
+	{ PCI_VDEVICE(INTEL, 0x9cc5), LPC_WPT_LP},
+	{ PCI_VDEVICE(INTEL, 0x9cc6), LPC_WPT_LP},
+	{ PCI_VDEVICE(INTEL, 0x9cc7), LPC_WPT_LP},
+	{ PCI_VDEVICE(INTEL, 0x9cc9), LPC_WPT_LP},
 	{ 0, },			/* End of list */
 };
 MODULE_DEVICE_TABLE(pci, lpc_ich_ids);
@@ -969,7 +982,6 @@ static int lpc_ich_probe(struct pci_dev *dev,
 	if (!cell_added) {
 		dev_warn(&dev->dev, "No MFD cells added\n");
 		lpc_ich_restore_config_space(dev);
-		pci_set_drvdata(dev, NULL);
 		return -ENODEV;
 	}
 
@@ -980,7 +992,6 @@ static void lpc_ich_remove(struct pci_dev *dev)
 {
 	mfd_remove_devices(&dev->dev);
 	lpc_ich_restore_config_space(dev);
-	pci_set_drvdata(dev, NULL);
 }
 
 static struct pci_driver lpc_ich_driver = {

drivers/mfd/lpc_sch.c

@@ -59,18 +59,21 @@ static struct mfd_cell isch_smbus_cell = {
 	.name = "isch_smbus",
 	.num_resources = 1,
 	.resources = &smbus_sch_resource,
+	.ignore_resource_conflicts = true,
 };
 
 static struct mfd_cell sch_gpio_cell = {
 	.name = "sch_gpio",
 	.num_resources = 1,
 	.resources = &gpio_sch_resource,
+	.ignore_resource_conflicts = true,
 };
 
 static struct mfd_cell wdt_sch_cell = {
 	.name = "ie6xx_wdt",
 	.num_resources = 1,
 	.resources = &wdt_sch_resource,
+	.ignore_resource_conflicts = true,
 };
 
 static DEFINE_PCI_DEVICE_TABLE(lpc_sch_ids) = {

drivers/mfd/max77686.c

@@ -31,6 +31,7 @@
 #include <linux/mfd/max77686.h>
 #include <linux/mfd/max77686-private.h>
 #include <linux/err.h>
+#include <linux/of.h>
 
 #define I2C_ADDR_RTC	(0x0C >> 1)
 

drivers/mfd/max77693-irq.c

@@ -128,7 +128,8 @@ static void max77693_irq_sync_unlock(struct irq_data *data)
 static const inline struct max77693_irq_data *
 irq_to_max77693_irq(struct max77693_dev *max77693, int irq)
 {
-	return &max77693_irqs[irq];
+	struct irq_data *data = irq_get_irq_data(irq);
+	return &max77693_irqs[data->hwirq];
 }
 
 static void max77693_irq_mask(struct irq_data *data)

drivers/mfd/max77693.c

@@ -28,6 +28,7 @@
 #include <linux/i2c.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
+#include <linux/of.h>
 #include <linux/pm_runtime.h>
 #include <linux/mutex.h>
 #include <linux/mfd/core.h>
@@ -110,15 +111,9 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
 			      const struct i2c_device_id *id)
 {
 	struct max77693_dev *max77693;
-	struct max77693_platform_data *pdata = dev_get_platdata(&i2c->dev);
 	u8 reg_data;
 	int ret = 0;
 
-	if (!pdata) {
-		dev_err(&i2c->dev, "No platform data found.\n");
-		return -EINVAL;
-	}
-
 	max77693 = devm_kzalloc(&i2c->dev,
 			sizeof(struct max77693_dev), GFP_KERNEL);
 	if (max77693 == NULL)
@@ -138,8 +133,6 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	max77693->wakeup = pdata->wakeup;
-
 	ret = max77693_read_reg(max77693->regmap, MAX77693_PMIC_REG_PMIC_ID2,
 				&reg_data);
 	if (ret < 0) {
@@ -179,8 +172,6 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
 	if (ret < 0)
 		goto err_mfd;
 
-	device_init_wakeup(max77693->dev, pdata->wakeup);
-
 	return ret;
 
 err_mfd:
@@ -235,11 +226,19 @@ static const struct dev_pm_ops max77693_pm = {
 	.resume = max77693_resume,
 };
 
+#ifdef CONFIG_OF
+static struct of_device_id max77693_dt_match[] = {
+	{ .compatible = "maxim,max77693" },
+	{},
+};
+#endif
+
 static struct i2c_driver max77693_i2c_driver = {
 	.driver = {
 		   .name = "max77693",
 		   .owner = THIS_MODULE,
 		   .pm = &max77693_pm,
+		   .of_match_table = of_match_ptr(max77693_dt_match),
 	},
 	.probe = max77693_i2c_probe,
 	.remove = max77693_i2c_remove,

drivers/mfd/max8907.c

@@ -17,6 +17,7 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/max8907.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>

drivers/mfd/max8925-i2c.c

@@ -238,7 +238,7 @@ static struct i2c_driver max8925_driver = {
 		.name	= "max8925",
 		.owner	= THIS_MODULE,
 		.pm     = &max8925_pm_ops,
-		.of_match_table = of_match_ptr(max8925_dt_ids),
+		.of_match_table = max8925_dt_ids,
 	},
 	.probe		= max8925_probe,
 	.remove		= max8925_remove,

drivers/mfd/max8997.c

@@ -24,6 +24,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
+#include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/interrupt.h>
 #include <linux/pm_runtime.h>

drivers/mfd/mc13xxx-i2c.c

@@ -78,7 +78,6 @@ static int mc13xxx_i2c_probe(struct i2c_client *client,
 		ret = PTR_ERR(mc13xxx->regmap);
 		dev_err(mc13xxx->dev, "Failed to initialize register map: %d\n",
 				ret);
-		dev_set_drvdata(&client->dev, NULL);
 		return ret;
 	}
 

drivers/mfd/mfd-core.c

@@ -64,7 +64,8 @@ int mfd_cell_disable(struct platform_device *pdev)
 EXPORT_SYMBOL(mfd_cell_disable);
 
 static int mfd_platform_add_cell(struct platform_device *pdev,
-				 const struct mfd_cell *cell)
+				 const struct mfd_cell *cell,
+				 atomic_t *usage_count)
 {
 	if (!cell)
 		return 0;
@@ -73,11 +74,12 @@ static int mfd_platform_add_cell(struct platform_device *pdev,
 	if (!pdev->mfd_cell)
 		return -ENOMEM;
 
+	pdev->mfd_cell->usage_count = usage_count;
 	return 0;
 }
 
 static int mfd_add_device(struct device *parent, int id,
-			  const struct mfd_cell *cell,
+			  const struct mfd_cell *cell, atomic_t *usage_count,
 			  struct resource *mem_base,
 			  int irq_base, struct irq_domain *domain)
 {
@@ -123,7 +125,7 @@ static int mfd_add_device(struct device *parent, int id,
 			goto fail_alias;
 	}
 
-	ret = mfd_platform_add_cell(pdev, cell);
+	ret = mfd_platform_add_cell(pdev, cell, usage_count);
 	if (ret)
 		goto fail_alias;
 
@@ -192,12 +194,12 @@ static int mfd_add_device(struct device *parent, int id,
 }
 
 int mfd_add_devices(struct device *parent, int id,
-		    struct mfd_cell *cells, int n_devs,
+		    const struct mfd_cell *cells, int n_devs,
 		    struct resource *mem_base,
 		    int irq_base, struct irq_domain *domain)
 {
 	int i;
-	int ret = 0;
+	int ret;
 	atomic_t *cnts;
 
 	/* initialize reference counting for all cells */
@@ -207,16 +209,19 @@ int mfd_add_devices(struct device *parent, int id,
 
 	for (i = 0; i < n_devs; i++) {
 		atomic_set(&cnts[i], 0);
-		cells[i].usage_count = &cnts[i];
-		ret = mfd_add_device(parent, id, cells + i, mem_base,
+		ret = mfd_add_device(parent, id, cells + i, cnts + i, mem_base,
 				     irq_base, domain);
 		if (ret)
-			break;
+			goto fail;
 	}
 
-	if (ret)
-		mfd_remove_devices(parent);
+	return 0;
 
+fail:
+	if (i)
+		mfd_remove_devices(parent);
+	else
+		kfree(cnts);
 	return ret;
 }
 EXPORT_SYMBOL(mfd_add_devices);
@@ -271,8 +276,8 @@ int mfd_clone_cell(const char *cell, const char **clones, size_t n_clones)
 	for (i = 0; i < n_clones; i++) {
 		cell_entry.name = clones[i];
 		/* don't give up if a single call fails; just report error */
-		if (mfd_add_device(pdev->dev.parent, -1, &cell_entry, NULL, 0,
-				   NULL))
+		if (mfd_add_device(pdev->dev.parent, -1, &cell_entry,
+				   cell_entry.usage_count, NULL, 0, NULL))
 			dev_err(dev, "failed to create platform device '%s'\n",
 					clones[i]);
 	}

drivers/mfd/omap-usb-host.c

@@ -328,13 +328,13 @@ static int usbhs_runtime_resume(struct device *dev)
 	omap_tll_enable(pdata);
 
 	if (!IS_ERR(omap->ehci_logic_fck))
-		clk_enable(omap->ehci_logic_fck);
+		clk_prepare_enable(omap->ehci_logic_fck);
 
 	for (i = 0; i < omap->nports; i++) {
 		switch (pdata->port_mode[i]) {
 		case OMAP_EHCI_PORT_MODE_HSIC:
 			if (!IS_ERR(omap->hsic60m_clk[i])) {
-				r = clk_enable(omap->hsic60m_clk[i]);
+				r = clk_prepare_enable(omap->hsic60m_clk[i]);
 				if (r) {
 					dev_err(dev,
 					 "Can't enable port %d hsic60m clk:%d\n",
@@ -343,7 +343,7 @@ static int usbhs_runtime_resume(struct device *dev)
 			}
 
 			if (!IS_ERR(omap->hsic480m_clk[i])) {
-				r = clk_enable(omap->hsic480m_clk[i]);
+				r = clk_prepare_enable(omap->hsic480m_clk[i]);
 				if (r) {
 					dev_err(dev,
 					 "Can't enable port %d hsic480m clk:%d\n",
@@ -354,7 +354,7 @@ static int usbhs_runtime_resume(struct device *dev)
 
 		case OMAP_EHCI_PORT_MODE_TLL:
 			if (!IS_ERR(omap->utmi_clk[i])) {
-				r = clk_enable(omap->utmi_clk[i]);
+				r = clk_prepare_enable(omap->utmi_clk[i]);
 				if (r) {
 					dev_err(dev,
 					 "Can't enable port %d clk : %d\n",
@@ -382,15 +382,15 @@ static int usbhs_runtime_suspend(struct device *dev)
 		switch (pdata->port_mode[i]) {
 		case OMAP_EHCI_PORT_MODE_HSIC:
 			if (!IS_ERR(omap->hsic60m_clk[i]))
-				clk_disable(omap->hsic60m_clk[i]);
+				clk_disable_unprepare(omap->hsic60m_clk[i]);
 
 			if (!IS_ERR(omap->hsic480m_clk[i]))
-				clk_disable(omap->hsic480m_clk[i]);
+				clk_disable_unprepare(omap->hsic480m_clk[i]);
 		/* Fall through as utmi_clks were used in HSIC mode */
 
 		case OMAP_EHCI_PORT_MODE_TLL:
 			if (!IS_ERR(omap->utmi_clk[i]))
-				clk_disable(omap->utmi_clk[i]);
+				clk_disable_unprepare(omap->utmi_clk[i]);
 			break;
 		default:
 			break;
@@ -398,7 +398,7 @@ static int usbhs_runtime_suspend(struct device *dev)
 	}
 
 	if (!IS_ERR(omap->ehci_logic_fck))
-		clk_disable(omap->ehci_logic_fck);
+		clk_disable_unprepare(omap->ehci_logic_fck);
 
 	omap_tll_disable(pdata);
 
@@ -893,7 +893,7 @@ static struct platform_driver usbhs_omap_driver = {
 		.name		= (char *)usbhs_driver_name,
 		.owner		= THIS_MODULE,
 		.pm		= &usbhsomap_dev_pm_ops,
-		.of_match_table = of_match_ptr(usbhs_omap_dt_ids),
+		.of_match_table = usbhs_omap_dt_ids,
 	},
 	.remove		= usbhs_omap_remove,
 };

drivers/mfd/omap-usb-tll.c

@@ -320,7 +320,7 @@ static struct platform_driver usbtll_omap_driver = {
 	.driver = {
 		.name		= (char *)usbtll_driver_name,
 		.owner		= THIS_MODULE,
-		.of_match_table = of_match_ptr(usbtll_omap_dt_ids),
+		.of_match_table = usbtll_omap_dt_ids,
 	},
 	.probe		= usbtll_omap_probe,
 	.remove		= usbtll_omap_remove,
@@ -429,7 +429,7 @@ int omap_tll_enable(struct usbhs_omap_platform_data *pdata)
 			if (IS_ERR(tll->ch_clk[i]))
 				continue;
 
-			r = clk_enable(tll->ch_clk[i]);
+			r = clk_prepare_enable(tll->ch_clk[i]);
 			if (r) {
 				dev_err(tll_dev,
 				 "Error enabling ch %d clock: %d\n", i, r);
@@ -460,7 +460,7 @@ int omap_tll_disable(struct usbhs_omap_platform_data *pdata)
 	for (i = 0; i < tll->nch; i++) {
 		if (omap_usb_mode_needs_tll(pdata->port_mode[i])) {
 			if (!IS_ERR(tll->ch_clk[i]))
-				clk_disable(tll->ch_clk[i]);
+				clk_disable_unprepare(tll->ch_clk[i]);
 		}
 	}
 

drivers/mfd/palmas.c

@@ -368,6 +368,7 @@ static const struct of_device_id of_palmas_match_tbl[] = {
 	},
 	{ },
 };
+MODULE_DEVICE_TABLE(of, of_palmas_match_tbl);
 
 static int palmas_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
@@ -402,7 +403,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
 	palmas->dev = &i2c->dev;
 	palmas->irq = i2c->irq;
 
-	match = of_match_device(of_match_ptr(of_palmas_match_tbl), &i2c->dev);
+	match = of_match_device(of_palmas_match_tbl, &i2c->dev);
 
 	if (!match)
 		return -ENODATA;
@@ -421,7 +422,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
 				dev_err(palmas->dev,
 					"can't attach client %d\n", i);
 				ret = -ENOMEM;
-				goto err;
+				goto err_i2c;
 			}
 			palmas->i2c_clients[i]->dev.of_node = of_node_get(node);
 		}
@@ -432,7 +433,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
 			dev_err(palmas->dev,
 				"Failed to allocate regmap %d, err: %d\n",
 				i, ret);
-			goto err;
+			goto err_i2c;
 		}
 	}
 
@@ -451,7 +452,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
 			reg);
 	if (ret < 0) {
 		dev_err(palmas->dev, "POLARITY_CTRL updat failed: %d\n", ret);
-		goto err;
+		goto err_i2c;
 	}
 
 	/* Change IRQ into clear on read mode for efficiency */
@@ -465,7 +466,7 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
 			IRQF_ONESHOT | pdata->irq_flags, 0, &palmas_irq_chip,
 			&palmas->irq_data);
 	if (ret < 0)
-		goto err;
+		goto err_i2c;
 
 no_irq:
 	slave = PALMAS_BASE_TO_SLAVE(PALMAS_PU_PD_OD_BASE);
@@ -551,7 +552,6 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
 		} else if (pdata->pm_off && !pm_power_off) {
 			palmas_dev = palmas;
 			pm_power_off = palmas_power_off;
-			return ret;
 		}
 	}
 
@@ -559,17 +559,31 @@ static int palmas_i2c_probe(struct i2c_client *i2c,
 
 err_irq:
 	regmap_del_irq_chip(palmas->irq, palmas->irq_data);
-err:
+err_i2c:
+	for (i = 1; i < PALMAS_NUM_CLIENTS; i++) {
+		if (palmas->i2c_clients[i])
+			i2c_unregister_device(palmas->i2c_clients[i]);
+	}
 	return ret;
 }
 
 static int palmas_i2c_remove(struct i2c_client *i2c)
 {
 	struct palmas *palmas = i2c_get_clientdata(i2c);
+	int i;
 
-	mfd_remove_devices(palmas->dev);
 	regmap_del_irq_chip(palmas->irq, palmas->irq_data);
 
+	for (i = 1; i < PALMAS_NUM_CLIENTS; i++) {
+		if (palmas->i2c_clients[i])
+			i2c_unregister_device(palmas->i2c_clients[i]);
+	}
+
+	if (palmas == palmas_dev) {
+		pm_power_off = NULL;
+		palmas_dev = NULL;
+	}
+
 	return 0;
 }
 

drivers/mfd/pm8921-core.c

@@ -171,12 +171,13 @@ static int pm8921_remove(struct platform_device *pdev)
 	drvdata = platform_get_drvdata(pdev);
 	if (drvdata)
 		pmic = drvdata->pm_chip_data;
-	if (pmic)
+	if (pmic) {
 		mfd_remove_devices(pmic->dev);
 		if (pmic->irq_chip) {
 			pm8xxx_irq_exit(pmic->irq_chip);
 			pmic->irq_chip = NULL;
 		}
+	}
 
 	return 0;
 }

drivers/mfd/rts5249.c

@@ -130,13 +130,57 @@ static int rts5249_optimize_phy(struct rtsx_pcr *pcr)
 {
 	int err;
 
-	err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV, 0xFE46);
+	err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV,
+			PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED |
+			PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN |
+			PHY_REG_REV_RX_PWST | PHY_REG_REV_CLKREQ_DLY_TIMER_1_0 |
+			PHY_REG_REV_STOP_CLKRD | PHY_REG_REV_STOP_CLKWR);
 	if (err < 0)
 		return err;
 
 	msleep(1);
 
-	return rtsx_pci_write_phy_register(pcr, PHY_BPCR, 0x05C0);
+	err = rtsx_pci_write_phy_register(pcr, PHY_BPCR,
+			PHY_BPCR_IBRXSEL | PHY_BPCR_IBTXSEL |
+			PHY_BPCR_IB_FILTER | PHY_BPCR_CMIRROR_EN);
+	if (err < 0)
+		return err;
+	err = rtsx_pci_write_phy_register(pcr, PHY_PCR,
+			PHY_PCR_FORCE_CODE | PHY_PCR_OOBS_CALI_50 |
+			PHY_PCR_OOBS_VCM_08 | PHY_PCR_OOBS_SEN_90 |
+			PHY_PCR_RSSI_EN);
+	if (err < 0)
+		return err;
+	err = rtsx_pci_write_phy_register(pcr, PHY_RCR2,
+			PHY_RCR2_EMPHASE_EN | PHY_RCR2_NADJR |
+			PHY_RCR2_CDR_CP_10 | PHY_RCR2_CDR_SR_2 |
+			PHY_RCR2_FREQSEL_12 | PHY_RCR2_CPADJEN |
+			PHY_RCR2_CDR_SC_8 | PHY_RCR2_CALIB_LATE);
+	if (err < 0)
+		return err;
+	err = rtsx_pci_write_phy_register(pcr, PHY_FLD4,
+			PHY_FLD4_FLDEN_SEL | PHY_FLD4_REQ_REF |
+			PHY_FLD4_RXAMP_OFF | PHY_FLD4_REQ_ADDA |
+			PHY_FLD4_BER_COUNT | PHY_FLD4_BER_TIMER |
+			PHY_FLD4_BER_CHK_EN);
+	if (err < 0)
+		return err;
+	err = rtsx_pci_write_phy_register(pcr, PHY_RDR, PHY_RDR_RXDSEL_1_9);
+	if (err < 0)
+		return err;
+	err = rtsx_pci_write_phy_register(pcr, PHY_RCR1,
+			PHY_RCR1_ADP_TIME | PHY_RCR1_VCO_COARSE);
+	if (err < 0)
+		return err;
+	err = rtsx_pci_write_phy_register(pcr, PHY_FLD3,
+			PHY_FLD3_TIMER_4 | PHY_FLD3_TIMER_6 |
+			PHY_FLD3_RXDELINK);
+	if (err < 0)
+		return err;
+	return rtsx_pci_write_phy_register(pcr, PHY_TUNE,
+			PHY_TUNE_TUNEREF_1_0 | PHY_TUNE_VBGSEL_1252 |
+			PHY_TUNE_SDBUS_33 | PHY_TUNE_TUNED18 |
+			PHY_TUNE_TUNED12);
 }
 
 static int rts5249_turn_on_led(struct rtsx_pcr *pcr)

drivers/mfd/rtsx_pcr.c

@@ -1149,7 +1149,7 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
 	pcr->remap_addr = ioremap_nocache(base, len);
 	if (!pcr->remap_addr) {
 		ret = -ENOMEM;
-		goto free_host;
+		goto free_handle;
 	}
 
 	pcr->rtsx_resv_buf = dma_alloc_coherent(&(pcidev->dev),
@@ -1209,8 +1209,6 @@ static int rtsx_pci_probe(struct pci_dev *pcidev,
 			pcr->rtsx_resv_buf, pcr->rtsx_resv_buf_addr);
 unmap:
 	iounmap(pcr->remap_addr);
-free_host:
-	dev_set_drvdata(&pcidev->dev, NULL);
 free_handle:
 	kfree(handle);
 free_pcr:
@@ -1242,7 +1240,6 @@ static void rtsx_pci_remove(struct pci_dev *pcidev)
 		pci_disable_msi(pcr->pci);
 	iounmap(pcr->remap_addr);
 
-	dev_set_drvdata(&pcidev->dev, NULL);
 	pci_release_regions(pcidev);
 	pci_disable_device(pcidev);
 

drivers/mfd/sec-core.c

@@ -17,6 +17,7 @@
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
+#include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/interrupt.h>
 #include <linux/pm_runtime.h>

drivers/mfd/sm501.c

@@ -1232,7 +1232,7 @@ static ssize_t sm501_dbg_regs(struct device *dev,
 }
 
 
-static DEVICE_ATTR(dbg_regs, 0666, sm501_dbg_regs, NULL);
+static DEVICE_ATTR(dbg_regs, 0444, sm501_dbg_regs, NULL);
 
 /* sm501_init_reg
  *
@@ -1660,7 +1660,6 @@ static int sm501_pci_probe(struct pci_dev *dev,
  err3:
 	pci_disable_device(dev);
  err2:
-	pci_set_drvdata(dev, NULL);
 	kfree(sm);
  err1:
 	return err;
@@ -1695,7 +1694,6 @@ static void sm501_pci_remove(struct pci_dev *dev)
 	release_resource(sm->regs_claim);
 	kfree(sm->regs_claim);
 
-	pci_set_drvdata(dev, NULL);
 	pci_disable_device(dev);
 }
 

drivers/mfd/stw481x.c

+/*
+ * Core driver for STw4810/STw4811
+ *
+ * Copyright (C) 2013 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/stw481x.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+
+/*
+ * This driver can only access the non-USB portions of STw4811, the register
+ * range 0x00-0x10 dealing with USB is bound to the two special I2C pins used
+ * for USB control.
+ */
+
+/* Registers inside the power control address space */
+#define STW_PC_VCORE_SEL	0x05U
+#define STW_PC_VAUX_SEL		0x06U
+#define STW_PC_VPLL_SEL		0x07U
+
+/**
+ * stw481x_get_pctl_reg() - get a power control register
+ * @stw481x: handle to the stw481x chip
+ * @reg: power control register to fetch
+ *
+ * The power control registers is a set of one-time-programmable registers
+ * in its own register space, accessed by writing addess bits to these
+ * two registers: bits 7,6,5 of PCTL_REG_LO corresponds to the 3 LSBs of
+ * the address and bits 8,9 of PCTL_REG_HI corresponds to the 2 MSBs of
+ * the address, forming an address space of 5 bits, i.e. 32 registers
+ * 0x00 ... 0x1f can be obtained.
+ */
+static int stw481x_get_pctl_reg(struct stw481x *stw481x, u8 reg)
+{
+	u8 msb = (reg >> 3) & 0x03;
+	u8 lsb = (reg << 5) & 0xe0;
+	unsigned int val;
+	u8 vrfy;
+	int ret;
+
+	ret = regmap_write(stw481x->map, STW_PCTL_REG_HI, msb);
+	if (ret)
+		return ret;
+	ret = regmap_write(stw481x->map, STW_PCTL_REG_LO, lsb);
+	if (ret)
+		return ret;
+	ret = regmap_read(stw481x->map, STW_PCTL_REG_HI, &val);
+	if (ret)
+		return ret;
+	vrfy = (val & 0x03) << 3;
+	ret = regmap_read(stw481x->map, STW_PCTL_REG_LO, &val);
+	if (ret)
+		return ret;
+	vrfy |= ((val >> 5) & 0x07);
+	if (vrfy != reg)
+		return -EIO;
+	return (val >> 1) & 0x0f;
+}
+
+static int stw481x_startup(struct stw481x *stw481x)
+{
+	/* Voltages multiplied by 100 */
+	u8 vcore_val[] = { 100, 105, 110, 115, 120, 122, 124, 126, 128,
+			   130, 132, 134, 136, 138, 140, 145 };
+	u8 vpll_val[] = { 105, 120, 130, 180 };
+	u8 vaux_val[] = { 15, 18, 25, 28 };
+	u8 vcore;
+	u8 vcore_slp;
+	u8 vpll;
+	u8 vaux;
+	bool vaux_en;
+	bool it_warn;
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(stw481x->map, STW_CONF1, &val);
+	if (ret)
+		return ret;
+	vaux_en = !!(val & STW_CONF1_PDN_VAUX);
+	it_warn = !!(val & STW_CONF1_IT_WARN);
+
+	dev_info(&stw481x->client->dev, "voltages %s\n",
+		(val & STW_CONF1_V_MONITORING) ? "OK" : "LOW");
+	dev_info(&stw481x->client->dev, "MMC level shifter %s\n",
+		(val & STW_CONF1_MMC_LS_STATUS) ? "high impedance" : "ON");
+	dev_info(&stw481x->client->dev, "VMMC: %s\n",
+		(val & STW_CONF1_PDN_VMMC) ? "ON" : "disabled");
+
+	dev_info(&stw481x->client->dev, "STw481x power control registers:\n");
+
+	ret = stw481x_get_pctl_reg(stw481x, STW_PC_VCORE_SEL);
+	if (ret < 0)
+		return ret;
+	vcore = ret & 0x0f;
+
+	ret = stw481x_get_pctl_reg(stw481x, STW_PC_VAUX_SEL);
+	if (ret < 0)
+		return ret;
+	vaux = (ret >> 2) & 3;
+	vpll = (ret >> 4) & 1; /* Save bit 4 */
+
+	ret = stw481x_get_pctl_reg(stw481x, STW_PC_VPLL_SEL);
+	if (ret < 0)
+		return ret;
+	vpll |= (ret >> 1) & 2;
+
+	dev_info(&stw481x->client->dev, "VCORE: %u.%uV %s\n",
+		vcore_val[vcore] / 100, vcore_val[vcore] % 100,
+		(ret & 4) ? "ON" : "OFF");
+
+	dev_info(&stw481x->client->dev, "VPLL:  %u.%uV %s\n",
+		vpll_val[vpll] / 100, vpll_val[vpll] % 100,
+		(ret & 0x10) ? "ON" : "OFF");
+
+	dev_info(&stw481x->client->dev, "VAUX:  %u.%uV %s\n",
+		vaux_val[vaux] / 10, vaux_val[vaux] % 10,
+		vaux_en ? "ON" : "OFF");
+
+	ret = regmap_read(stw481x->map, STW_CONF2, &val);
+	if (ret)
+		return ret;
+
+	dev_info(&stw481x->client->dev, "TWARN: %s threshold, %s\n",
+		it_warn ? "below" : "above",
+		(val & STW_CONF2_MASK_TWARN) ?
+		 "enabled" : "mask through VDDOK");
+	dev_info(&stw481x->client->dev, "VMMC: %s\n",
+		(val & STW_CONF2_VMMC_EXT) ? "internal" : "external");
+	dev_info(&stw481x->client->dev, "IT WAKE UP: %s\n",
+		(val & STW_CONF2_MASK_IT_WAKE_UP) ? "enabled" : "masked");
+	dev_info(&stw481x->client->dev, "GPO1: %s\n",
+		(val & STW_CONF2_GPO1) ? "low" : "high impedance");
+	dev_info(&stw481x->client->dev, "GPO2: %s\n",
+		(val & STW_CONF2_GPO2) ? "low" : "high impedance");
+
+	ret = regmap_read(stw481x->map, STW_VCORE_SLEEP, &val);
+	if (ret)
+		return ret;
+	vcore_slp = val & 0x0f;
+	dev_info(&stw481x->client->dev, "VCORE SLEEP: %u.%uV\n",
+		vcore_val[vcore_slp] / 100, vcore_val[vcore_slp] % 100);
+
+	return 0;
+}
+
+/*
+ * MFD cells - we have one cell which is selected operation
+ * mode, and we always have a GPIO cell.
+ */
+static struct mfd_cell stw481x_cells[] = {
+	{
+		.of_compatible = "st,stw481x-vmmc",
+		.name = "stw481x-vmmc-regulator",
+		.id = -1,
+	},
+};
+
+const struct regmap_config stw481x_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int stw481x_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct stw481x			*stw481x;
+	int ret;
+	int i;
+
+	stw481x = devm_kzalloc(&client->dev, sizeof(*stw481x), GFP_KERNEL);
+	if (!stw481x)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, stw481x);
+	stw481x->client = client;
+	stw481x->map = devm_regmap_init_i2c(client, &stw481x_regmap_config);
+
+	ret = stw481x_startup(stw481x);
+	if (ret) {
+		dev_err(&client->dev, "chip initialization failed\n");
+		return ret;
+	}
+
+	/* Set up and register the platform devices. */
+	for (i = 0; i < ARRAY_SIZE(stw481x_cells); i++) {
+		/* One state holder for all drivers, this is simple */
+		stw481x_cells[i].platform_data = stw481x;
+		stw481x_cells[i].pdata_size = sizeof(*stw481x);
+	}
+
+	ret = mfd_add_devices(&client->dev, 0, stw481x_cells,
+			ARRAY_SIZE(stw481x_cells), NULL, 0, NULL);
+	if (ret)
+		return ret;
+
+	dev_info(&client->dev, "initialized STw481x device\n");
+
+	return ret;
+}
+
+static int stw481x_remove(struct i2c_client *client)
+{
+	mfd_remove_devices(&client->dev);
+	return 0;
+}
+
+/*
+ * This ID table is completely unused, as this is a pure
+ * device-tree probed driver, but it has to be here due to
+ * the structure of the I2C core.
+ */
+static const struct i2c_device_id stw481x_id[] = {
+	{ "stw481x", 0 },
+	{ },
+};
+
+static const struct of_device_id stw481x_match[] = {
+	{ .compatible = "st,stw4810", },
+	{ .compatible = "st,stw4811", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, stw481x_match);
+
+static struct i2c_driver stw481x_driver = {
+	.driver = {
+		.name	= "stw481x",
+		.of_match_table = stw481x_match,
+	},
+	.probe		= stw481x_probe,
+	.remove		= stw481x_remove,
+	.id_table	= stw481x_id,
+};
+
+module_i2c_driver(stw481x_driver);
+
+MODULE_AUTHOR("Linus Walleij");
+MODULE_DESCRIPTION("STw481x PMIC driver");
+MODULE_LICENSE("GPL v2");

drivers/mfd/tc3589x.c

@@ -16,6 +16,19 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/tc3589x.h>
 
+/**
+ * enum tc3589x_version - indicates the TC3589x version
+ */
+enum tc3589x_version {
+	TC3589X_TC35890,
+	TC3589X_TC35892,
+	TC3589X_TC35893,
+	TC3589X_TC35894,
+	TC3589X_TC35895,
+	TC3589X_TC35896,
+	TC3589X_UNKNOWN,
+};
+
 #define TC3589x_CLKMODE_MODCTL_SLEEP		0x0
 #define TC3589x_CLKMODE_MODCTL_OPERATION	(1 << 0)
 
@@ -361,7 +374,21 @@ static int tc3589x_probe(struct i2c_client *i2c,
 	tc3589x->i2c = i2c;
 	tc3589x->pdata = pdata;
 	tc3589x->irq_base = pdata->irq_base;
-	tc3589x->num_gpio = id->driver_data;
+
+	switch (id->driver_data) {
+	case TC3589X_TC35893:
+	case TC3589X_TC35895:
+	case TC3589X_TC35896:
+		tc3589x->num_gpio = 20;
+		break;
+	case TC3589X_TC35890:
+	case TC3589X_TC35892:
+	case TC3589X_TC35894:
+	case TC3589X_UNKNOWN:
+	default:
+		tc3589x->num_gpio = 24;
+		break;
+	}
 
 	i2c_set_clientdata(i2c, tc3589x);
 
@@ -432,7 +459,13 @@ static int tc3589x_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(tc3589x_dev_pm_ops, tc3589x_suspend, tc3589x_resume);
 
 static const struct i2c_device_id tc3589x_id[] = {
-	{ "tc3589x", 24 },
+	{ "tc35890", TC3589X_TC35890 },
+	{ "tc35892", TC3589X_TC35892 },
+	{ "tc35893", TC3589X_TC35893 },
+	{ "tc35894", TC3589X_TC35894 },
+	{ "tc35895", TC3589X_TC35895 },
+	{ "tc35896", TC3589X_TC35896 },
+	{ "tc3589x", TC3589X_UNKNOWN },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, tc3589x_id);

drivers/mfd/ti-ssp.c

@@ -445,7 +445,6 @@ static int ti_ssp_remove(struct platform_device *pdev)
 	iounmap(ssp->regs);
 	release_mem_region(ssp->res->start, resource_size(ssp->res));
 	kfree(ssp);
-	dev_set_drvdata(dev, NULL);
 	return 0;
 }
 

drivers/mfd/ti_am335x_tscadc.c

@@ -56,21 +56,25 @@ EXPORT_SYMBOL_GPL(am335x_tsc_se_update);
 
 void am335x_tsc_se_set(struct ti_tscadc_dev *tsadc, u32 val)
 {
-	spin_lock(&tsadc->reg_lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&tsadc->reg_lock, flags);
 	tsadc->reg_se_cache = tscadc_readl(tsadc, REG_SE);
 	tsadc->reg_se_cache |= val;
 	am335x_tsc_se_update(tsadc);
-	spin_unlock(&tsadc->reg_lock);
+	spin_unlock_irqrestore(&tsadc->reg_lock, flags);
 }
 EXPORT_SYMBOL_GPL(am335x_tsc_se_set);
 
 void am335x_tsc_se_clr(struct ti_tscadc_dev *tsadc, u32 val)
 {
-	spin_lock(&tsadc->reg_lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&tsadc->reg_lock, flags);
 	tsadc->reg_se_cache = tscadc_readl(tsadc, REG_SE);
 	tsadc->reg_se_cache &= ~val;
 	am335x_tsc_se_update(tsadc);
-	spin_unlock(&tsadc->reg_lock);
+	spin_unlock_irqrestore(&tsadc->reg_lock, flags);
 }
 EXPORT_SYMBOL_GPL(am335x_tsc_se_clr);
 
@@ -95,7 +99,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	const __be32            *cur;
 	u32			val;
 	int			err, ctrl;
-	int			clk_value, clock_rate;
+	int			clock_rate;
 	int			tsc_wires = 0, adc_channels = 0, total_channels;
 	int			readouts = 0;
 
@@ -196,11 +200,11 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	}
 	clock_rate = clk_get_rate(clk);
 	clk_put(clk);
-	clk_value = clock_rate / ADC_CLK;
+	tscadc->clk_div = clock_rate / ADC_CLK;
 
 	/* TSCADC_CLKDIV needs to be configured to the value minus 1 */
-	clk_value = clk_value - 1;
-	tscadc_writel(tscadc, REG_CLKDIV, clk_value);
+	tscadc->clk_div--;
+	tscadc_writel(tscadc, REG_CLKDIV, tscadc->clk_div);
 
 	/* Set the control register bits */
 	ctrl = CNTRLREG_STEPCONFIGWRT |
@@ -303,6 +307,8 @@ static int tscadc_resume(struct device *dev)
 	tscadc_writel(tscadc_dev, REG_CTRL,
 			(restore | CNTRLREG_TSCSSENB));
 
+	tscadc_writel(tscadc_dev, REG_CLKDIV, tscadc_dev->clk_div);
+
 	return 0;
 }
 
@@ -326,7 +332,7 @@ static struct platform_driver ti_tscadc_driver = {
 		.name   = "ti_am3359-tscadc",
 		.owner	= THIS_MODULE,
 		.pm	= TSCADC_PM_OPS,
-		.of_match_table = of_match_ptr(ti_tscadc_dt_ids),
+		.of_match_table = ti_tscadc_dt_ids,
 	},
 	.probe	= ti_tscadc_probe,
 	.remove	= ti_tscadc_remove,

drivers/mfd/timberdale.c

@@ -678,7 +678,7 @@ static int timb_probe(struct pci_dev *dev,
 	priv->ctl_mapbase = mapbase + CHIPCTLOFFSET;
 	if (!request_mem_region(priv->ctl_mapbase, CHIPCTLSIZE, "timb-ctl")) {
 		dev_err(&dev->dev, "Failed to request ctl mem\n");
-		goto err_request;
+		goto err_start;
 	}
 
 	priv->ctl_membase = ioremap(priv->ctl_mapbase, CHIPCTLSIZE);
@@ -828,13 +828,10 @@ static int timb_probe(struct pci_dev *dev,
 	iounmap(priv->ctl_membase);
 err_ioremap:
 	release_mem_region(priv->ctl_mapbase, CHIPCTLSIZE);
-err_request:
-	pci_set_drvdata(dev, NULL);
 err_start:
 	pci_disable_device(dev);
 err_enable:
 	kfree(priv);
-	pci_set_drvdata(dev, NULL);
 	return -ENODEV;
 }
 
@@ -851,7 +848,6 @@ static void timb_remove(struct pci_dev *dev)
 
 	pci_disable_msix(dev);
 	pci_disable_device(dev);
-	pci_set_drvdata(dev, NULL);
 	kfree(priv);
 }
 

drivers/mfd/tps6507x.c

@@ -19,6 +19,7 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/tps6507x.h>

drivers/mfd/tps65217.c

@@ -245,7 +245,7 @@ static struct i2c_driver tps65217_driver = {
 	.driver		= {
 		.name	= "tps65217",
 		.owner	= THIS_MODULE,
-		.of_match_table = of_match_ptr(tps65217_of_match),
+		.of_match_table = tps65217_of_match,
 	},
 	.id_table	= tps65217_id_table,
 	.probe		= tps65217_probe,

drivers/mfd/tps6586x.c

@@ -26,6 +26,7 @@
 #include <linux/i2c.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/of.h>
 
 #include <linux/mfd/core.h>
 #include <linux/mfd/tps6586x.h>
@@ -124,6 +125,7 @@ struct tps6586x {
 	struct i2c_client	*client;
 	struct regmap		*regmap;
 
+	int			irq;
 	struct irq_chip		irq_chip;
 	struct mutex		irq_lock;
 	int			irq_base;
@@ -261,12 +263,23 @@ static void tps6586x_irq_sync_unlock(struct irq_data *data)
 	mutex_unlock(&tps6586x->irq_lock);
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int tps6586x_irq_set_wake(struct irq_data *irq_data, unsigned int on)
+{
+	struct tps6586x *tps6586x = irq_data_get_irq_chip_data(irq_data);
+	return irq_set_irq_wake(tps6586x->irq, on);
+}
+#else
+#define tps6586x_irq_set_wake NULL
+#endif
+
 static struct irq_chip tps6586x_irq_chip = {
 	.name = "tps6586x",
 	.irq_bus_lock = tps6586x_irq_lock,
 	.irq_bus_sync_unlock = tps6586x_irq_sync_unlock,
 	.irq_disable = tps6586x_irq_disable,
 	.irq_enable = tps6586x_irq_enable,
+	.irq_set_wake = tps6586x_irq_set_wake,
 };
 
 static int tps6586x_irq_map(struct irq_domain *h, unsigned int virq,
@@ -331,6 +344,8 @@ static int tps6586x_irq_init(struct tps6586x *tps6586x, int irq,
 	int new_irq_base;
 	int irq_num = ARRAY_SIZE(tps6586x_irqs);
 
+	tps6586x->irq = irq;
+
 	mutex_init(&tps6586x->irq_lock);
 	for (i = 0; i < 5; i++) {
 		tps6586x->mask_reg[i] = 0xff;
@@ -360,10 +375,8 @@ static int tps6586x_irq_init(struct tps6586x *tps6586x, int irq,
 	ret = request_threaded_irq(irq, NULL, tps6586x_irq, IRQF_ONESHOT,
 				   "tps6586x", tps6586x);
 
-	if (!ret) {
+	if (!ret)
 		device_init_wakeup(tps6586x->dev, 1);
-		enable_irq_wake(irq);
-	}
 
 	return ret;
 }

drivers/mfd/tps65910.c

@@ -25,6 +25,7 @@
 #include <linux/mfd/core.h>
 #include <linux/regmap.h>
 #include <linux/mfd/tps65910.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
 
 static struct resource rtc_resources[] = {
@@ -410,14 +411,10 @@ static struct tps65910_board *tps65910_parse_dt(struct i2c_client *client,
 	ret = of_property_read_u32(np, "ti,vmbch-threshold", &prop);
 	if (!ret)
 		board_info->vmbch_threshold = prop;
-	else if (*chip_id == TPS65911)
-		dev_warn(&client->dev, "VMBCH-Threshold not specified");
 
 	ret = of_property_read_u32(np, "ti,vmbch2-threshold", &prop);
 	if (!ret)
 		board_info->vmbch2_threshold = prop;
-	else if (*chip_id == TPS65911)
-		dev_warn(&client->dev, "VMBCH2-Threshold not specified");
 
 	prop = of_property_read_bool(np, "ti,en-ck32k-xtal");
 	board_info->en_ck32k_xtal = prop;

drivers/mfd/twl6040.c

@@ -565,13 +565,13 @@ static int twl6040_probe(struct i2c_client *client,
 				      twl6040->supplies);
 	if (ret != 0) {
 		dev_err(&client->dev, "Failed to get supplies: %d\n", ret);
-		goto regulator_get_err;
+		return ret;
 	}
 
 	ret = regulator_bulk_enable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
 	if (ret != 0) {
 		dev_err(&client->dev, "Failed to enable supplies: %d\n", ret);
-		goto regulator_get_err;
+		return ret;
 	}
 
 	twl6040->dev = &client->dev;
@@ -619,7 +619,7 @@ static int twl6040_probe(struct i2c_client *client,
 					"twl6040_irq_th", twl6040);
 	if (ret) {
 		dev_err(twl6040->dev, "Thermal IRQ request failed: %d\n", ret);
-		goto thirq_err;
+		goto readyirq_err;
 	}
 
 	/* dual-access registers controlled by I2C only */
@@ -659,21 +659,14 @@ static int twl6040_probe(struct i2c_client *client,
 	ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children,
 			      NULL, 0, NULL);
 	if (ret)
-		goto mfd_err;
+		goto readyirq_err;
 
 	return 0;
 
-mfd_err:
-	devm_free_irq(&client->dev, twl6040->irq_th, twl6040);
-thirq_err:
-	devm_free_irq(&client->dev, twl6040->irq_ready, twl6040);
 readyirq_err:
 	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
 gpio_err:
 	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
-regulator_get_err:
-	i2c_set_clientdata(client, NULL);
-
 	return ret;
 }
 
@@ -684,12 +677,9 @@ static int twl6040_remove(struct i2c_client *client)
 	if (twl6040->power_count)
 		twl6040_power(twl6040, 0);
 
-	devm_free_irq(&client->dev, twl6040->irq_ready, twl6040);
-	devm_free_irq(&client->dev, twl6040->irq_th, twl6040);
 	regmap_del_irq_chip(twl6040->irq, twl6040->irq_data);
 
 	mfd_remove_devices(&client->dev);
-	i2c_set_clientdata(client, NULL);
 
 	regulator_bulk_disable(TWL6040_NUM_SUPPLIES, twl6040->supplies);
 

drivers/mfd/ucb1x00-core.c

@@ -553,6 +553,7 @@ static int ucb1x00_probe(struct mcp *mcp)
 	if (ucb->irq_base < 0) {
 		dev_err(&ucb->dev, "unable to allocate 16 irqs: %d\n",
 			ucb->irq_base);
+		ret = ucb->irq_base;
 		goto err_irq_alloc;
 	}
 

drivers/mfd/wm5102-tables.c

@@ -903,7 +903,6 @@ static const struct reg_default wm5102_reg_default[] = {
 	{ 0x00000D1B, 0xFFFF },   /* R3355  - IRQ2 Status 4 Mask */ 
 	{ 0x00000D1C, 0xFFFF },   /* R3356  - IRQ2 Status 5 Mask */ 
 	{ 0x00000D1F, 0x0000 },   /* R3359  - IRQ2 Control */ 
-	{ 0x00000D50, 0x0000 },   /* R3408  - AOD wkup and trig */
 	{ 0x00000D53, 0xFFFF },   /* R3411  - AOD IRQ Mask IRQ1 */ 
 	{ 0x00000D54, 0xFFFF },   /* R3412  - AOD IRQ Mask IRQ2 */ 
 	{ 0x00000D56, 0x0000 },   /* R3414  - Jack detect debounce */ 

drivers/mfd/wm5110-tables.c

@@ -243,6 +243,12 @@ int wm5110_patch(struct arizona *arizona)
 EXPORT_SYMBOL_GPL(wm5110_patch);
 
 static const struct regmap_irq wm5110_aod_irqs[ARIZONA_NUM_IRQ] = {
+	[ARIZONA_IRQ_MICD_CLAMP_FALL] = {
+		.mask = ARIZONA_MICD_CLAMP_FALL_EINT1
+	},
+	[ARIZONA_IRQ_MICD_CLAMP_RISE] = {
+		.mask = ARIZONA_MICD_CLAMP_RISE_EINT1
+	},
 	[ARIZONA_IRQ_GP5_FALL] = { .mask = ARIZONA_GP5_FALL_EINT1 },
 	[ARIZONA_IRQ_GP5_RISE] = { .mask = ARIZONA_GP5_RISE_EINT1 },
 	[ARIZONA_IRQ_JD_FALL] = { .mask = ARIZONA_JD1_FALL_EINT1 },
@@ -505,6 +511,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000293, 0x0000 },    /* R659   - Accessory Detect Mode 1 */
 	{ 0x0000029B, 0x0020 },    /* R667   - Headphone Detect 1 */
 	{ 0x0000029C, 0x0000 },    /* R668   - Headphone Detect 2 */
+	{ 0x000002A2, 0x0000 },    /* R674   - Micd clamp control */
 	{ 0x000002A3, 0x1102 },    /* R675   - Mic Detect 1 */
 	{ 0x000002A4, 0x009F },    /* R676   - Mic Detect 2 */
 	{ 0x000002A5, 0x0000 },    /* R677   - Mic Detect 3 */
@@ -592,7 +599,7 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x0000043E, 0x0080 },    /* R1086  - DAC Volume Limit 6R */
 	{ 0x0000043F, 0x0800 },    /* R1087  - Noise Gate Select 6R */
 	{ 0x00000450, 0x0000 },    /* R1104  - DAC AEC Control 1 */
-	{ 0x00000458, 0x0001 },    /* R1112  - Noise Gate Control */
+	{ 0x00000458, 0x0000 },    /* R1112  - Noise Gate Control */
 	{ 0x00000480, 0x0040 },    /* R1152  - Class W ANC Threshold 1 */
 	{ 0x00000481, 0x0040 },    /* R1153  - Class W ANC Threshold 2 */
 	{ 0x00000490, 0x0069 },    /* R1168  - PDM SPK1 CTRL 1 */
@@ -1204,7 +1211,6 @@ static const struct reg_default wm5110_reg_default[] = {
 	{ 0x00000D1B, 0xFFFF },    /* R3355  - IRQ2 Status 4 Mask */
 	{ 0x00000D1C, 0xFFFF },    /* R3356  - IRQ2 Status 5 Mask */
 	{ 0x00000D1F, 0x0000 },    /* R3359  - IRQ2 Control */
-	{ 0x00000D50, 0x0000 },    /* R3408  - AOD wkup and trig */
 	{ 0x00000D53, 0xFFFF },    /* R3411  - AOD IRQ Mask IRQ1 */
 	{ 0x00000D54, 0xFFFF },    /* R3412  - AOD IRQ Mask IRQ2 */
 	{ 0x00000D56, 0x0000 },    /* R3414  - Jack detect debounce */
@@ -1440,6 +1446,7 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_ACCESSORY_DETECT_MODE_1:
 	case ARIZONA_HEADPHONE_DETECT_1:
 	case ARIZONA_HEADPHONE_DETECT_2:
+	case ARIZONA_MICD_CLAMP_CONTROL:
 	case ARIZONA_MIC_DETECT_1:
 	case ARIZONA_MIC_DETECT_2:
 	case ARIZONA_MIC_DETECT_3:
@@ -2291,21 +2298,37 @@ static bool wm5110_readable_register(struct device *dev, unsigned int reg)
 	case ARIZONA_DSP1_STATUS_1:
 	case ARIZONA_DSP1_STATUS_2:
 	case ARIZONA_DSP1_STATUS_3:
+	case ARIZONA_DSP1_SCRATCH_0:
+	case ARIZONA_DSP1_SCRATCH_1:
+	case ARIZONA_DSP1_SCRATCH_2:
+	case ARIZONA_DSP1_SCRATCH_3:
 	case ARIZONA_DSP2_CONTROL_1:
 	case ARIZONA_DSP2_CLOCKING_1:
 	case ARIZONA_DSP2_STATUS_1:
 	case ARIZONA_DSP2_STATUS_2:
 	case ARIZONA_DSP2_STATUS_3:
+	case ARIZONA_DSP2_SCRATCH_0:
+	case ARIZONA_DSP2_SCRATCH_1:
+	case ARIZONA_DSP2_SCRATCH_2:
+	case ARIZONA_DSP2_SCRATCH_3:
 	case ARIZONA_DSP3_CONTROL_1:
 	case ARIZONA_DSP3_CLOCKING_1:
 	case ARIZONA_DSP3_STATUS_1:
 	case ARIZONA_DSP3_STATUS_2:
 	case ARIZONA_DSP3_STATUS_3:
+	case ARIZONA_DSP3_SCRATCH_0:
+	case ARIZONA_DSP3_SCRATCH_1:
+	case ARIZONA_DSP3_SCRATCH_2:
+	case ARIZONA_DSP3_SCRATCH_3:
 	case ARIZONA_DSP4_CONTROL_1:
 	case ARIZONA_DSP4_CLOCKING_1:
 	case ARIZONA_DSP4_STATUS_1:
 	case ARIZONA_DSP4_STATUS_2:
 	case ARIZONA_DSP4_STATUS_3:
+	case ARIZONA_DSP4_SCRATCH_0:
+	case ARIZONA_DSP4_SCRATCH_1:
+	case ARIZONA_DSP4_SCRATCH_2:
+	case ARIZONA_DSP4_SCRATCH_3:
 		return true;
 	default:
 		return false;
@@ -2347,25 +2370,41 @@ static bool wm5110_volatile_register(struct device *dev, unsigned int reg)
 	case ARIZONA_INTERRUPT_RAW_STATUS_7:
 	case ARIZONA_INTERRUPT_RAW_STATUS_8:
 	case ARIZONA_IRQ_PIN_STATUS:
+	case ARIZONA_AOD_WKUP_AND_TRIG:
 	case ARIZONA_AOD_IRQ1:
 	case ARIZONA_AOD_IRQ2:
+	case ARIZONA_AOD_IRQ_RAW_STATUS:
 	case ARIZONA_FX_CTRL2:
 	case ARIZONA_ASRC_STATUS:
 	case ARIZONA_DSP_STATUS:
-	case ARIZONA_DSP1_CONTROL_1:
-	case ARIZONA_DSP1_CLOCKING_1:
 	case ARIZONA_DSP1_STATUS_1:
 	case ARIZONA_DSP1_STATUS_2:
 	case ARIZONA_DSP1_STATUS_3:
+	case ARIZONA_DSP1_SCRATCH_0:
+	case ARIZONA_DSP1_SCRATCH_1:
+	case ARIZONA_DSP1_SCRATCH_2:
+	case ARIZONA_DSP1_SCRATCH_3:
 	case ARIZONA_DSP2_STATUS_1:
 	case ARIZONA_DSP2_STATUS_2:
 	case ARIZONA_DSP2_STATUS_3:
+	case ARIZONA_DSP2_SCRATCH_0:
+	case ARIZONA_DSP2_SCRATCH_1:
+	case ARIZONA_DSP2_SCRATCH_2:
+	case ARIZONA_DSP2_SCRATCH_3:
 	case ARIZONA_DSP3_STATUS_1:
 	case ARIZONA_DSP3_STATUS_2:
 	case ARIZONA_DSP3_STATUS_3:
+	case ARIZONA_DSP3_SCRATCH_0:
+	case ARIZONA_DSP3_SCRATCH_1:
+	case ARIZONA_DSP3_SCRATCH_2:
+	case ARIZONA_DSP3_SCRATCH_3:
 	case ARIZONA_DSP4_STATUS_1:
 	case ARIZONA_DSP4_STATUS_2:
 	case ARIZONA_DSP4_STATUS_3:
+	case ARIZONA_DSP4_SCRATCH_0:
+	case ARIZONA_DSP4_SCRATCH_1:
+	case ARIZONA_DSP4_SCRATCH_2:
+	case ARIZONA_DSP4_SCRATCH_3:
 		return true;
 	default:
 		return false;

drivers/mfd/wm8994-core.c

@@ -33,84 +33,6 @@
 
 #include "wm8994.h"
 
-/**
- * wm8994_reg_read: Read a single WM8994 register.
- *
- * @wm8994: Device to read from.
- * @reg: Register to read.
- */
-int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg)
-{
-	unsigned int val;
-	int ret;
-
-	ret = regmap_read(wm8994->regmap, reg, &val);
-
-	if (ret < 0)
-		return ret;
-	else
-		return val;
-}
-EXPORT_SYMBOL_GPL(wm8994_reg_read);
-
-/**
- * wm8994_bulk_read: Read multiple WM8994 registers
- *
- * @wm8994: Device to read from
- * @reg: First register
- * @count: Number of registers
- * @buf: Buffer to fill.  The data will be returned big endian.
- */
-int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
-		     int count, u16 *buf)
-{
-	return regmap_bulk_read(wm8994->regmap, reg, buf, count);
-}
-
-/**
- * wm8994_reg_write: Write a single WM8994 register.
- *
- * @wm8994: Device to write to.
- * @reg: Register to write to.
- * @val: Value to write.
- */
-int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
-		     unsigned short val)
-{
-	return regmap_write(wm8994->regmap, reg, val);
-}
-EXPORT_SYMBOL_GPL(wm8994_reg_write);
-
-/**
- * wm8994_bulk_write: Write multiple WM8994 registers
- *
- * @wm8994: Device to write to
- * @reg: First register
- * @count: Number of registers
- * @buf: Buffer to write from.  Data must be big-endian formatted.
- */
-int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg,
-		      int count, const u16 *buf)
-{
-	return regmap_raw_write(wm8994->regmap, reg, buf, count * sizeof(u16));
-}
-EXPORT_SYMBOL_GPL(wm8994_bulk_write);
-
-/**
- * wm8994_set_bits: Set the value of a bitfield in a WM8994 register
- *
- * @wm8994: Device to write to.
- * @reg: Register to write to.
- * @mask: Mask of bits to set.
- * @val: Value to set (unshifted)
- */
-int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
-		    unsigned short mask, unsigned short val)
-{
-	return regmap_update_bits(wm8994->regmap, reg, mask, val);
-}
-EXPORT_SYMBOL_GPL(wm8994_set_bits);
-
 static struct mfd_cell wm8994_regulator_devs[] = {
 	{
 		.name = "wm8994-ldo",

include/dt-bindings/mfd/as3722.h

+/*
+ * This header provides macros for ams AS3722 device bindings.
+ *
+ * Copyright (c) 2013, NVIDIA Corporation.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ */
+
+#ifndef __DT_BINDINGS_AS3722_H__
+#define __DT_BINDINGS_AS3722_H__
+
+/* External control pins */
+#define AS3722_EXT_CONTROL_PIN_ENABLE1 1
+#define AS3722_EXT_CONTROL_PIN_ENABLE2 2
+#define AS3722_EXT_CONTROL_PIN_ENABLE2 3
+
+/* Interrupt numbers for AS3722 */
+#define AS3722_IRQ_LID			0
+#define AS3722_IRQ_ACOK			1
+#define AS3722_IRQ_ENABLE1		2
+#define AS3722_IRQ_OCCUR_ALARM_SD0	3
+#define AS3722_IRQ_ONKEY_LONG_PRESS	4
+#define AS3722_IRQ_ONKEY		5
+#define AS3722_IRQ_OVTMP		6
+#define AS3722_IRQ_LOWBAT		7
+#define AS3722_IRQ_SD0_LV		8
+#define AS3722_IRQ_SD1_LV		9
+#define AS3722_IRQ_SD2_LV		10
+#define AS3722_IRQ_PWM1_OV_PROT		11
+#define AS3722_IRQ_PWM2_OV_PROT		12
+#define AS3722_IRQ_ENABLE2		13
+#define AS3722_IRQ_SD6_LV		14
+#define AS3722_IRQ_RTC_REP		15
+#define AS3722_IRQ_RTC_ALARM		16
+#define AS3722_IRQ_GPIO1		17
+#define AS3722_IRQ_GPIO2		18
+#define AS3722_IRQ_GPIO3		19
+#define AS3722_IRQ_GPIO4		20
+#define AS3722_IRQ_GPIO5		21
+#define AS3722_IRQ_WATCHDOG		22
+#define AS3722_IRQ_ENABLE3		23
+#define AS3722_IRQ_TEMP_SD0_SHUTDOWN	24
+#define AS3722_IRQ_TEMP_SD1_SHUTDOWN	25
+#define AS3722_IRQ_TEMP_SD2_SHUTDOWN	26
+#define AS3722_IRQ_TEMP_SD0_ALARM	27
+#define AS3722_IRQ_TEMP_SD1_ALARM	28
+#define AS3722_IRQ_TEMP_SD6_ALARM	29
+#define AS3722_IRQ_OCCUR_ALARM_SD6	30
+#define AS3722_IRQ_ADC			31
+
+#endif /* __DT_BINDINGS_AS3722_H__ */

include/linux/mfd/arizona/registers.h

@@ -1908,7 +1908,7 @@
 #define ARIZONA_FLL2_SYNC_GAIN_MASK              0x003c  /* FLL2_SYNC_GAIN */
 #define ARIZONA_FLL2_SYNC_GAIN_SHIFT                  2  /* FLL2_SYNC_GAIN */
 #define ARIZONA_FLL2_SYNC_GAIN_WIDTH                  4  /* FLL2_SYNC_GAIN */
-#define ARIZONA_FLL2_SYNC_BW_MASK                0x0001  /* FLL2_SYNC_BW */
+#define ARIZONA_FLL2_SYNC_BW                     0x0001  /* FLL2_SYNC_BW */
 #define ARIZONA_FLL2_SYNC_BW_MASK                0x0001  /* FLL2_SYNC_BW */
 #define ARIZONA_FLL2_SYNC_BW_SHIFT                    0  /* FLL2_SYNC_BW */
 #define ARIZONA_FLL2_SYNC_BW_WIDTH                    1  /* FLL2_SYNC_BW */

include/linux/mfd/core.h

@@ -104,7 +104,7 @@ static inline const struct mfd_cell *mfd_get_cell(struct platform_device *pdev)
 }
 
 extern int mfd_add_devices(struct device *parent, int id,
-			   struct mfd_cell *cells, int n_devs,
+			   const struct mfd_cell *cells, int n_devs,
 			   struct resource *mem_base,
 			   int irq_base, struct irq_domain *irq_domain);
 

include/linux/mfd/da9052/da9052.h

@@ -148,10 +148,15 @@ static inline int da9052_group_read(struct da9052 *da9052, unsigned char reg,
 				     unsigned reg_cnt, unsigned char *val)
 {
 	int ret;
+	unsigned int tmp;
+	int i;
 
-	ret = regmap_bulk_read(da9052->regmap, reg, val, reg_cnt);
+	for (i = 0; i < reg_cnt; i++) {
+		ret = regmap_read(da9052->regmap, reg + i, &tmp);
+		val[i] = (unsigned char)tmp;
 		if (ret < 0)
 			return ret;
+	}
 
 	if (da9052->fix_io) {
 		ret = da9052->fix_io(da9052, reg);
@@ -166,10 +171,13 @@ static inline int da9052_group_write(struct da9052 *da9052, unsigned char reg,
 				      unsigned reg_cnt, unsigned char *val)
 {
 	int ret;
+	int i;
 
-	ret = regmap_raw_write(da9052->regmap, reg, val, reg_cnt);
+	for (i = 0; i < reg_cnt; i++) {
+		ret = regmap_write(da9052->regmap, reg + i, val[i]);
 		if (ret < 0)
 			return ret;
+	}
 
 	if (da9052->fix_io) {
 		ret = da9052->fix_io(da9052, reg);

include/linux/mfd/max77693-private.h

@@ -323,7 +323,6 @@ struct max77693_dev {
 
 	int irq;
 	int irq_gpio;
-	bool wakeup;
 	struct mutex irqlock;
 	int irq_masks_cur[MAX77693_IRQ_GROUP_NR];
 	int irq_masks_cache[MAX77693_IRQ_GROUP_NR];

include/linux/mfd/max77693.h

@@ -64,8 +64,6 @@ struct max77693_muic_platform_data {
 };
 
 struct max77693_platform_data {
-	int wakeup;
-
 	/* regulator data */
 	struct max77693_regulator_data *regulators;
 	int num_regulators;

include/linux/mfd/rtsx_pci.h

@@ -756,6 +756,59 @@
 #define PCR_SETTING_REG2		0x814
 #define PCR_SETTING_REG3		0x747
 
+/* Phy bits */
+#define PHY_PCR_FORCE_CODE			0xB000
+#define PHY_PCR_OOBS_CALI_50			0x0800
+#define PHY_PCR_OOBS_VCM_08			0x0200
+#define PHY_PCR_OOBS_SEN_90			0x0040
+#define PHY_PCR_RSSI_EN				0x0002
+
+#define PHY_RCR1_ADP_TIME			0x0100
+#define PHY_RCR1_VCO_COARSE			0x001F
+
+#define PHY_RCR2_EMPHASE_EN			0x8000
+#define PHY_RCR2_NADJR				0x4000
+#define PHY_RCR2_CDR_CP_10			0x0400
+#define PHY_RCR2_CDR_SR_2			0x0100
+#define PHY_RCR2_FREQSEL_12			0x0040
+#define PHY_RCR2_CPADJEN			0x0020
+#define PHY_RCR2_CDR_SC_8			0x0008
+#define PHY_RCR2_CALIB_LATE			0x0002
+
+#define PHY_RDR_RXDSEL_1_9			0x4000
+
+#define PHY_TUNE_TUNEREF_1_0			0x4000
+#define PHY_TUNE_VBGSEL_1252			0x0C00
+#define PHY_TUNE_SDBUS_33			0x0200
+#define PHY_TUNE_TUNED18			0x01C0
+#define PHY_TUNE_TUNED12			0X0020
+
+#define PHY_BPCR_IBRXSEL			0x0400
+#define PHY_BPCR_IBTXSEL			0x0100
+#define PHY_BPCR_IB_FILTER			0x0080
+#define PHY_BPCR_CMIRROR_EN			0x0040
+
+#define PHY_REG_REV_RESV			0xE000
+#define PHY_REG_REV_RXIDLE_LATCHED		0x1000
+#define PHY_REG_REV_P1_EN			0x0800
+#define PHY_REG_REV_RXIDLE_EN			0x0400
+#define PHY_REG_REV_CLKREQ_DLY_TIMER_1_0	0x0040
+#define PHY_REG_REV_STOP_CLKRD			0x0020
+#define PHY_REG_REV_RX_PWST			0x0008
+#define PHY_REG_REV_STOP_CLKWR			0x0004
+
+#define PHY_FLD3_TIMER_4			0x7800
+#define PHY_FLD3_TIMER_6			0x00E0
+#define PHY_FLD3_RXDELINK			0x0004
+
+#define PHY_FLD4_FLDEN_SEL			0x4000
+#define PHY_FLD4_REQ_REF			0x2000
+#define PHY_FLD4_RXAMP_OFF			0x1000
+#define PHY_FLD4_REQ_ADDA			0x0800
+#define PHY_FLD4_BER_COUNT			0x00E0
+#define PHY_FLD4_BER_TIMER			0x000A
+#define PHY_FLD4_BER_CHK_EN			0x0001
+
 #define rtsx_pci_init_cmd(pcr)		((pcr)->ci = 0)
 
 struct rtsx_pcr;

include/linux/mfd/stw481x.h

+/*
+ * Copyright (C) 2011 ST-Ericsson SA
+ * Written on behalf of Linaro for ST-Ericsson
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef MFD_STW481X_H
+#define MFD_STW481X_H
+
+#include <linux/i2c.h>
+#include <linux/regulator/machine.h>
+#include <linux/regmap.h>
+#include <linux/bitops.h>
+
+/* These registers are accessed from more than one driver */
+#define STW_CONF1			0x11U
+#define STW_CONF1_PDN_VMMC		0x01U
+#define STW_CONF1_VMMC_MASK		0x0eU
+#define STW_CONF1_VMMC_1_8V		0x02U
+#define STW_CONF1_VMMC_2_85V		0x04U
+#define STW_CONF1_VMMC_3V		0x06U
+#define STW_CONF1_VMMC_1_85V		0x08U
+#define STW_CONF1_VMMC_2_6V		0x0aU
+#define STW_CONF1_VMMC_2_7V		0x0cU
+#define STW_CONF1_VMMC_3_3V		0x0eU
+#define STW_CONF1_MMC_LS_STATUS		0x10U
+#define STW_PCTL_REG_LO			0x1eU
+#define STW_PCTL_REG_HI			0x1fU
+#define STW_CONF1_V_MONITORING		0x20U
+#define STW_CONF1_IT_WARN		0x40U
+#define STW_CONF1_PDN_VAUX		0x80U
+#define STW_CONF2			0x20U
+#define STW_CONF2_MASK_TWARN		0x01U
+#define STW_CONF2_VMMC_EXT		0x02U
+#define STW_CONF2_MASK_IT_WAKE_UP	0x04U
+#define STW_CONF2_GPO1			0x08U
+#define STW_CONF2_GPO2			0x10U
+#define STW_VCORE_SLEEP			0x21U
+
+/**
+ * struct stw481x - state holder for the Stw481x drivers
+ * @mutex: mutex to serialize I2C accesses
+ * @i2c_client: corresponding I2C client
+ * @regulator: regulator device for regulator children
+ * @map: regmap handle to access device registers
+ */
+struct stw481x {
+	struct mutex		lock;
+	struct i2c_client	*client;
+	struct regulator_dev	*vmmc_regulator;
+	struct regmap		*map;
+};
+
+#endif

include/linux/mfd/syscon.h

@@ -17,10 +17,35 @@
 
 struct device_node;
 
+#ifdef CONFIG_MFD_SYSCON
 extern struct regmap *syscon_node_to_regmap(struct device_node *np);
 extern struct regmap *syscon_regmap_lookup_by_compatible(const char *s);
 extern struct regmap *syscon_regmap_lookup_by_pdevname(const char *s);
 extern struct regmap *syscon_regmap_lookup_by_phandle(
 					struct device_node *np,
 					const char *property);
+#else
+static inline struct regmap *syscon_node_to_regmap(struct device_node *np)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct regmap *syscon_regmap_lookup_by_compatible(const char *s)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct regmap *syscon_regmap_lookup_by_pdevname(const char *s)
+{
+	return ERR_PTR(-ENOSYS);
+}
+
+static inline struct regmap *syscon_regmap_lookup_by_phandle(
+					struct device_node *np,
+					const char *property)
+{
+	return ERR_PTR(-ENOSYS);
+}
+#endif
+
 #endif /* __LINUX_MFD_SYSCON_H__ */

include/linux/mfd/ti_am335x_tscadc.h

@@ -134,13 +134,18 @@
 #define FIFO1_THRESHOLD		19
 
 /*
-* ADC runs at 3MHz, and it takes
-* 15 cycles to latch one data output.
-* Hence the idle time for ADC to
-* process one sample data would be
-* around 5 micro seconds.
-*/
-#define IDLE_TIMEOUT 5 /* microsec */
+ * time in us for processing a single channel, calculated as follows:
+ *
+ * num cycles = open delay + (sample delay + conv time) * averaging
+ *
+ * num cycles: 152 + (1 + 13) * 16 = 376
+ *
+ * clock frequency: 26MHz / 8 = 3.25MHz
+ * clock period: 1 / 3.25MHz = 308ns
+ *
+ * processing time: 376 * 308ns = 116us
+ */
+#define IDLE_TIMEOUT 116 /* microsec */
 
 #define TSCADC_CELLS		2
 
@@ -155,6 +160,7 @@ struct ti_tscadc_dev {
 	struct mfd_cell cells[TSCADC_CELLS];
 	u32 reg_se_cache;
 	spinlock_t reg_lock;
+	unsigned int clk_div;
 
 	/* tsc device */
 	struct titsc *tsc;

include/linux/mfd/wm8994/core.h

@@ -56,8 +56,6 @@ struct irq_domain;
 #define WM8994_IRQ_GPIO(x) (x + WM8994_IRQ_TEMP_WARN)
 
 struct wm8994 {
-	struct mutex irq_lock;
-
 	struct wm8994_pdata pdata;
 
 	enum wm8994_type type;
@@ -85,16 +83,43 @@ struct wm8994 {
 };
 
 /* Device I/O API */
-int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg);
-int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
-		 unsigned short val);
-int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
-		    unsigned short mask, unsigned short val);
-int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
-		     int count, u16 *buf);
-int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg,
-		     int count, const u16 *buf);
 
+static inline int wm8994_reg_read(struct wm8994 *wm8994, unsigned short reg)
+{
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(wm8994->regmap, reg, &val);
+
+	if (ret < 0)
+		return ret;
+	else
+		return val;
+}
+
+static inline int wm8994_reg_write(struct wm8994 *wm8994, unsigned short reg,
+				   unsigned short val)
+{
+	return regmap_write(wm8994->regmap, reg, val);
+}
+
+static inline int wm8994_bulk_read(struct wm8994 *wm8994, unsigned short reg,
+				   int count, u16 *buf)
+{
+	return regmap_bulk_read(wm8994->regmap, reg, buf, count);
+}
+
+static inline int wm8994_bulk_write(struct wm8994 *wm8994, unsigned short reg,
+				    int count, const u16 *buf)
+{
+	return regmap_raw_write(wm8994->regmap, reg, buf, count * sizeof(u16));
+}
+
+static inline int wm8994_set_bits(struct wm8994 *wm8994, unsigned short reg,
+		    unsigned short mask, unsigned short val)
+{
+	return regmap_update_bits(wm8994->regmap, reg, mask, val);
+}
 
 /* Helper to save on boilerplate */
 static inline int wm8994_request_irq(struct wm8994 *wm8994, int irq,