Commit db33f9bc authored by David S. Miller's avatar David S. Miller

[SPARC64]: Fix OOPS on sunhv interrupts.

Until the uart is openned, port->info is NULL.

Also, init the port->irq properly and give a non-zero
port->membase so that the uart device reporting is done.
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c7f81d42
......@@ -136,8 +136,12 @@ static struct tty_struct *receive_chars(struct uart_port *port, struct pt_regs *
static void transmit_chars(struct uart_port *port)
{
struct circ_buf *xmit = &port->info->xmit;
struct circ_buf *xmit;
if (!port->info)
return;
xmit = &port->info->xmit;
if (uart_circ_empty(xmit) || uart_tx_stopped(port))
return;
......@@ -452,8 +456,6 @@ static unsigned int __init get_interrupt(void)
return sun4v_vdev_device_interrupt(node);
}
static u32 sunhv_irq;
static int __init sunhv_init(void)
{
struct uart_port *port;
......@@ -462,35 +464,33 @@ static int __init sunhv_init(void)
if (tlb_type != hypervisor)
return -ENODEV;
sunhv_irq = get_interrupt();
if (!sunhv_irq)
return -ENODEV;
port = kmalloc(sizeof(struct uart_port), GFP_KERNEL);
if (unlikely(!port))
return -ENOMEM;
memset(port, 0, sizeof(struct uart_port));
port->line = 0;
port->ops = &sunhv_pops;
port->type = PORT_SUNHV;
port->uartclk = ( 29491200 / 16 ); /* arbitrary */
if (request_irq(sunhv_irq, sunhv_interrupt,
SA_SHIRQ, "serial(sunhv)", port)) {
printk("sunhv: Cannot get IRQ %x\n", sunhv_irq);
/* Set this just to make uart_configure_port() happy. */
port->membase = (unsigned char __iomem *) __pa(port);
port->irq = get_interrupt();
if (!port->irq) {
kfree(port);
return -ENODEV;
}
printk("SUNHV: SUN4V virtual console, IRQ %s\n",
__irq_itoa(sunhv_irq));
sunhv_reg.minor = sunserial_current_minor;
sunhv_reg.nr = 1;
ret = uart_register_driver(&sunhv_reg);
if (ret < 0) {
free_irq(sunhv_irq, up);
printk(KERN_ERR "SUNHV: uart_register_driver() failed %d\n",
ret);
kfree(port);
return ret;
......@@ -502,7 +502,26 @@ static int __init sunhv_init(void)
sunhv_port = port;
uart_add_one_port(&sunhv_reg, port);
ret = uart_add_one_port(&sunhv_reg, port);
if (ret < 0) {
printk(KERN_ERR "SUNHV: uart_add_one_port() failed %d\n", ret);
sunserial_current_minor -= 1;
uart_unregister_driver(&sunhv_reg);
kfree(port);
sunhv_port = NULL;
return -ENODEV;
}
if (request_irq(port->irq, sunhv_interrupt,
SA_SHIRQ, "serial(sunhv)", port)) {
printk(KERN_ERR "sunhv: Cannot register IRQ\n");
uart_remove_one_port(&sunhv_reg, port);
sunserial_current_minor -= 1;
uart_unregister_driver(&sunhv_reg);
kfree(port);
sunhv_port = NULL;
return -ENODEV;
}
return 0;
}
......@@ -513,8 +532,9 @@ static void __exit sunhv_exit(void)
BUG_ON(!port);
free_irq(port->irq, port);
uart_remove_one_port(&sunhv_reg, port);
free_irq(sunhv_irq, port);
sunserial_current_minor -= 1;
uart_unregister_driver(&sunhv_reg);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment