Commit db48cc2d authored by David S. Miller's avatar David S. Miller

Merge branch 'marvell-phy-cleanups'

Andrew Lunn says:

====================
More marvell phy cleanups

This patchset continues the cleanup of the Marvell PHY driver.  These
phys use pages to allow more than the 32 registers that fit into the
MDIO address space. Cleanup the code used for changing pages.

v2
Reverse christmas tree
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents a55667e6 52295666
......@@ -41,6 +41,12 @@
#include <linux/uaccess.h>
#define MII_MARVELL_PHY_PAGE 22
#define MII_MARVELL_COPPER_PAGE 0x00
#define MII_MARVELL_FIBER_PAGE 0x01
#define MII_MARVELL_MSCR_PAGE 0x02
#define MII_MARVELL_LED_PAGE 0x03
#define MII_MARVELL_MISC_TEST_PAGE 0x06
#define MII_MARVELL_WOL_PAGE 0x11
#define MII_M1011_IEVENT 0x13
#define MII_M1011_IEVENT_CLEAR 0x0000
......@@ -54,7 +60,6 @@
#define MII_M1011_PHY_SCR_MDI_X 0x0020
#define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060
#define MII_M1145_PHY_EXT_ADDR_PAGE 0x16
#define MII_M1145_PHY_EXT_SR 0x1b
#define MII_M1145_PHY_EXT_CR 0x14
#define MII_M1145_RGMII_RX_DELAY 0x0080
......@@ -83,10 +88,6 @@
#define MII_M1111_HWCFG_FIBER_COPPER_AUTO 0x8000
#define MII_M1111_HWCFG_FIBER_COPPER_RES 0x2000
#define MII_M1111_COPPER 0
#define MII_M1111_FIBER 1
#define MII_88E1121_PHY_MSCR_PAGE 2
#define MII_88E1121_PHY_MSCR_REG 21
#define MII_88E1121_PHY_MSCR_RX_DELAY BIT(5)
#define MII_88E1121_PHY_MSCR_TX_DELAY BIT(4)
......@@ -112,7 +113,6 @@
#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7)
/* LED Timer Control Register */
#define MII_88E1318S_PHY_LED_PAGE 0x03
#define MII_88E1318S_PHY_LED_TCR 0x12
#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
......@@ -123,13 +123,11 @@
#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18
#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19
#define MII_88E1318S_PHY_WOL_PAGE 0x11
#define MII_88E1318S_PHY_WOL_CTRL 0x10
#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14)
#define MII_88E1121_PHY_LED_CTRL 16
#define MII_88E1121_PHY_LED_PAGE 3
#define MII_88E1121_PHY_LED_DEF 0x0030
#define MII_M1011_PHY_STATUS 0x11
......@@ -199,6 +197,19 @@ static int marvell_set_page(struct phy_device *phydev, int page)
return phy_write(phydev, MII_MARVELL_PHY_PAGE, page);
}
static int marvell_get_set_page(struct phy_device *phydev, int page)
{
int oldpage = marvell_get_page(phydev);
if (oldpage < 0)
return oldpage;
if (page != oldpage)
return marvell_set_page(phydev, page);
return 0;
}
static int marvell_ack_interrupt(struct phy_device *phydev)
{
int err;
......@@ -452,11 +463,9 @@ static int m88e1121_config_aneg(struct phy_device *phydev)
{
int err, oldpage, mscr;
oldpage = marvell_get_page(phydev);
err = marvell_set_page(phydev, MII_88E1121_PHY_MSCR_PAGE);
if (err < 0)
return err;
oldpage = marvell_get_set_page(phydev, MII_MARVELL_MSCR_PAGE);
if (oldpage < 0)
return oldpage;
if (phy_interface_is_rgmii(phydev)) {
mscr = phy_read(phydev, MII_88E1121_PHY_MSCR_REG) &
......@@ -493,11 +502,9 @@ static int m88e1318_config_aneg(struct phy_device *phydev)
{
int err, oldpage, mscr;
oldpage = marvell_get_page(phydev);
err = marvell_set_page(phydev, MII_88E1121_PHY_MSCR_PAGE);
if (err < 0)
return err;
oldpage = marvell_get_set_page(phydev, MII_MARVELL_MSCR_PAGE);
if (oldpage < 0)
return oldpage;
mscr = phy_read(phydev, MII_88E1318S_PHY_MSCR1_REG);
mscr |= MII_88E1318S_PHY_MSCR1_PAD_ODD;
......@@ -606,7 +613,7 @@ static int m88e1510_config_aneg(struct phy_device *phydev)
{
int err;
err = marvell_set_page(phydev, MII_M1111_COPPER);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
goto error;
......@@ -616,7 +623,7 @@ static int m88e1510_config_aneg(struct phy_device *phydev)
goto error;
/* Then the fiber link */
err = marvell_set_page(phydev, MII_M1111_FIBER);
err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
if (err < 0)
goto error;
......@@ -624,10 +631,10 @@ static int m88e1510_config_aneg(struct phy_device *phydev)
if (err < 0)
goto error;
return marvell_set_page(phydev, MII_M1111_COPPER);
return marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
error:
marvell_set_page(phydev, MII_M1111_COPPER);
marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
return err;
}
......@@ -650,7 +657,7 @@ static int m88e1116r_config_init(struct phy_device *phydev)
mdelay(500);
err = marvell_set_page(phydev, 0);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
return err;
......@@ -662,7 +669,7 @@ static int m88e1116r_config_init(struct phy_device *phydev)
if (err < 0)
return err;
err = marvell_set_page(phydev, 2);
err = marvell_set_page(phydev, MII_MARVELL_MSCR_PAGE);
if (err < 0)
return err;
temp = phy_read(phydev, MII_M1116R_CONTROL_REG_MAC);
......@@ -671,7 +678,7 @@ static int m88e1116r_config_init(struct phy_device *phydev)
err = phy_write(phydev, MII_M1116R_CONTROL_REG_MAC, temp);
if (err < 0)
return err;
err = marvell_set_page(phydev, 0);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
return err;
......@@ -760,11 +767,7 @@ static int m88e1111_config_init_sgmii(struct phy_device *phydev)
return err;
/* make sure copper is selected */
err = phy_read(phydev, MII_M1145_PHY_EXT_ADDR_PAGE);
if (err < 0)
return err;
return phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE, err & (~0xff));
return marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
}
static int m88e1111_config_init_rtbi(struct phy_device *phydev)
......@@ -847,11 +850,9 @@ static int m88e1121_config_init(struct phy_device *phydev)
{
int err, oldpage;
oldpage = marvell_get_page(phydev);
err = marvell_set_page(phydev, MII_88E1121_PHY_LED_PAGE);
if (err < 0)
return err;
oldpage = marvell_get_set_page(phydev, MII_MARVELL_LED_PAGE);
if (oldpage < 0)
return oldpage;
/* Default PHY LED config: LED[0] .. Link, LED[1] .. Activity */
err = phy_write(phydev, MII_88E1121_PHY_LED_CTRL,
......@@ -892,7 +893,7 @@ static int m88e1510_config_init(struct phy_device *phydev)
return err;
/* Reset page selection */
err = marvell_set_page(phydev, 0);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
return err;
}
......@@ -922,7 +923,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
int err;
/* Change address */
err = marvell_set_page(phydev, 2);
err = marvell_set_page(phydev, MII_MARVELL_MSCR_PAGE);
if (err < 0)
return err;
......@@ -932,7 +933,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
return err;
/* Change address */
err = marvell_set_page(phydev, 3);
err = marvell_set_page(phydev, MII_MARVELL_LED_PAGE);
if (err < 0)
return err;
......@@ -949,7 +950,7 @@ static int m88e1118_config_init(struct phy_device *phydev)
return err;
/* Reset address */
err = marvell_set_page(phydev, 0);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
return err;
......@@ -961,7 +962,7 @@ static int m88e1149_config_init(struct phy_device *phydev)
int err;
/* Change address */
err = marvell_set_page(phydev, 2);
err = marvell_set_page(phydev, MII_MARVELL_MSCR_PAGE);
if (err < 0)
return err;
......@@ -975,7 +976,7 @@ static int m88e1149_config_init(struct phy_device *phydev)
return err;
/* Reset address */
err = marvell_set_page(phydev, 0);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
return err;
......@@ -1245,7 +1246,7 @@ static int marvell_read_status_page(struct phy_device *phydev, int page)
/* Detect and update the link, but return if there
* was an error
*/
if (page == MII_M1111_FIBER)
if (page == MII_MARVELL_FIBER_PAGE)
fiber = 1;
else
fiber = 0;
......@@ -1278,11 +1279,11 @@ static int marvell_read_status(struct phy_device *phydev)
/* Check the fiber mode first */
if (phydev->supported & SUPPORTED_FIBRE &&
phydev->interface != PHY_INTERFACE_MODE_SGMII) {
err = marvell_set_page(phydev, MII_M1111_FIBER);
err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
if (err < 0)
goto error;
err = marvell_read_status_page(phydev, MII_M1111_FIBER);
err = marvell_read_status_page(phydev, MII_MARVELL_FIBER_PAGE);
if (err < 0)
goto error;
......@@ -1297,15 +1298,15 @@ static int marvell_read_status(struct phy_device *phydev)
return 0;
/* If fiber link is down, check and save copper mode state */
err = marvell_set_page(phydev, MII_M1111_COPPER);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
goto error;
}
return marvell_read_status_page(phydev, MII_M1111_COPPER);
return marvell_read_status_page(phydev, MII_MARVELL_COPPER_PAGE);
error:
marvell_set_page(phydev, MII_M1111_COPPER);
marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
return err;
}
......@@ -1320,7 +1321,7 @@ static int marvell_suspend(struct phy_device *phydev)
/* Suspend the fiber mode first */
if (!(phydev->supported & SUPPORTED_FIBRE)) {
err = marvell_set_page(phydev, MII_M1111_FIBER);
err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
if (err < 0)
goto error;
......@@ -1330,7 +1331,7 @@ static int marvell_suspend(struct phy_device *phydev)
goto error;
/* Then, the copper link */
err = marvell_set_page(phydev, MII_M1111_COPPER);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
goto error;
}
......@@ -1339,7 +1340,7 @@ static int marvell_suspend(struct phy_device *phydev)
return genphy_suspend(phydev);
error:
marvell_set_page(phydev, MII_M1111_COPPER);
marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
return err;
}
......@@ -1354,7 +1355,7 @@ static int marvell_resume(struct phy_device *phydev)
/* Resume the fiber mode first */
if (!(phydev->supported & SUPPORTED_FIBRE)) {
err = marvell_set_page(phydev, MII_M1111_FIBER);
err = marvell_set_page(phydev, MII_MARVELL_FIBER_PAGE);
if (err < 0)
goto error;
......@@ -1364,7 +1365,7 @@ static int marvell_resume(struct phy_device *phydev)
goto error;
/* Then, the copper link */
err = marvell_set_page(phydev, MII_M1111_COPPER);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
goto error;
}
......@@ -1373,7 +1374,7 @@ static int marvell_resume(struct phy_device *phydev)
return genphy_resume(phydev);
error:
marvell_set_page(phydev, MII_M1111_COPPER);
marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
return err;
}
......@@ -1402,14 +1403,14 @@ static void m88e1318_get_wol(struct phy_device *phydev,
wol->supported = WAKE_MAGIC;
wol->wolopts = 0;
if (marvell_set_page(phydev, MII_88E1318S_PHY_WOL_PAGE) < 0)
if (marvell_set_page(phydev, MII_MARVELL_WOL_PAGE) < 0)
return;
if (phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL) &
MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
wol->wolopts |= WAKE_MAGIC;
if (marvell_set_page(phydev, 0x00) < 0)
if (marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE) < 0)
return;
}
......@@ -1422,7 +1423,7 @@ static int m88e1318_set_wol(struct phy_device *phydev,
if (wol->wolopts & WAKE_MAGIC) {
/* Explicitly switch to page 0x00, just to be sure */
err = marvell_set_page(phydev, 0x00);
err = marvell_set_page(phydev, MII_MARVELL_COPPER_PAGE);
if (err < 0)
return err;
......@@ -1433,7 +1434,7 @@ static int m88e1318_set_wol(struct phy_device *phydev,
if (err < 0)
return err;
err = marvell_set_page(phydev, MII_88E1318S_PHY_LED_PAGE);
err = marvell_set_page(phydev, MII_MARVELL_LED_PAGE);
if (err < 0)
return err;
......@@ -1446,7 +1447,7 @@ static int m88e1318_set_wol(struct phy_device *phydev,
if (err < 0)
return err;
err = marvell_set_page(phydev, MII_88E1318S_PHY_WOL_PAGE);
err = marvell_set_page(phydev, MII_MARVELL_WOL_PAGE);
if (err < 0)
return err;
......@@ -1475,7 +1476,7 @@ static int m88e1318_set_wol(struct phy_device *phydev,
if (err < 0)
return err;
} else {
err = marvell_set_page(phydev, MII_88E1318S_PHY_WOL_PAGE);
err = marvell_set_page(phydev, MII_MARVELL_WOL_PAGE);
if (err < 0)
return err;
......@@ -1520,12 +1521,11 @@ static u64 marvell_get_stat(struct phy_device *phydev, int i)
{
struct marvell_hw_stat stat = marvell_hw_stats[i];
struct marvell_priv *priv = phydev->priv;
int err, oldpage, val;
int oldpage, val;
u64 ret;
oldpage = marvell_get_page(phydev);
err = marvell_set_page(phydev, stat.page);
if (err < 0)
oldpage = marvell_get_set_page(phydev, stat.page);
if (oldpage < 0)
return UINT64_MAX;
val = phy_read(phydev, stat.reg);
......@@ -1554,6 +1554,7 @@ static void marvell_get_stats(struct phy_device *phydev,
#ifdef CONFIG_HWMON
static int m88e1121_get_temp(struct phy_device *phydev, long *temp)
{
int oldpage;
int ret;
int val;
......@@ -1561,9 +1562,11 @@ static int m88e1121_get_temp(struct phy_device *phydev, long *temp)
mutex_lock(&phydev->lock);
ret = phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE, 0x6);
if (ret < 0)
goto error;
oldpage = marvell_get_set_page(phydev, MII_MARVELL_MISC_TEST_PAGE);
if (oldpage < 0) {
mutex_unlock(&phydev->lock);
return oldpage;
}
/* Enable temperature sensor */
ret = phy_read(phydev, MII_88E1121_MISC_TEST);
......@@ -1593,7 +1596,7 @@ static int m88e1121_get_temp(struct phy_device *phydev, long *temp)
*temp = ((val & MII_88E1121_MISC_TEST_TEMP_MASK) - 5) * 5000;
error:
phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE, 0x0);
marvell_set_page(phydev, oldpage);
mutex_unlock(&phydev->lock);
return ret;
......@@ -1670,15 +1673,18 @@ static const struct hwmon_chip_info m88e1121_hwmon_chip_info = {
static int m88e1510_get_temp(struct phy_device *phydev, long *temp)
{
int oldpage;
int ret;
*temp = 0;
mutex_lock(&phydev->lock);
ret = phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE, 0x6);
if (ret < 0)
goto error;
oldpage = marvell_get_set_page(phydev, MII_MARVELL_MISC_TEST_PAGE);
if (oldpage < 0) {
mutex_unlock(&phydev->lock);
return oldpage;
}
ret = phy_read(phydev, MII_88E1510_TEMP_SENSOR);
if (ret < 0)
......@@ -1687,7 +1693,7 @@ static int m88e1510_get_temp(struct phy_device *phydev, long *temp)
*temp = ((ret & MII_88E1510_TEMP_SENSOR_MASK) - 25) * 1000;
error:
phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE, 0x0);
marvell_set_page(phydev, oldpage);
mutex_unlock(&phydev->lock);
return ret;
......@@ -1695,15 +1701,18 @@ static int m88e1510_get_temp(struct phy_device *phydev, long *temp)
int m88e1510_get_temp_critical(struct phy_device *phydev, long *temp)
{
int oldpage;
int ret;
*temp = 0;
mutex_lock(&phydev->lock);
ret = phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE, 0x6);
if (ret < 0)
goto error;
oldpage = marvell_get_set_page(phydev, MII_MARVELL_MISC_TEST_PAGE);
if (oldpage < 0) {
mutex_unlock(&phydev->lock);
return oldpage;
}
ret = phy_read(phydev, MII_88E1121_MISC_TEST);
if (ret < 0)
......@@ -1715,7 +1724,7 @@ int m88e1510_get_temp_critical(struct phy_device *phydev, long *temp)
*temp *= 1000;
error:
phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE, 0x0);
marvell_set_page(phydev, oldpage);
mutex_unlock(&phydev->lock);
return ret;
......@@ -1723,13 +1732,16 @@ int m88e1510_get_temp_critical(struct phy_device *phydev, long *temp)
int m88e1510_set_temp_critical(struct phy_device *phydev, long temp)
{
int oldpage;
int ret;
mutex_lock(&phydev->lock);
ret = phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE, 0x6);
if (ret < 0)
goto error;
oldpage = marvell_get_set_page(phydev, MII_MARVELL_MISC_TEST_PAGE);
if (oldpage < 0) {
mutex_unlock(&phydev->lock);
return oldpage;
}
ret = phy_read(phydev, MII_88E1121_MISC_TEST);
if (ret < 0)
......@@ -1742,7 +1754,7 @@ int m88e1510_set_temp_critical(struct phy_device *phydev, long temp)
(temp << MII_88E1510_MISC_TEST_TEMP_THRESHOLD_SHIFT));
error:
phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE, 0x0);
marvell_set_page(phydev, oldpage);
mutex_unlock(&phydev->lock);
return ret;
......@@ -1750,15 +1762,18 @@ int m88e1510_set_temp_critical(struct phy_device *phydev, long temp)
int m88e1510_get_temp_alarm(struct phy_device *phydev, long *alarm)
{
int oldpage;
int ret;
*alarm = false;
mutex_lock(&phydev->lock);
ret = phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE, 0x6);
if (ret < 0)
goto error;
oldpage = marvell_get_set_page(phydev, MII_MARVELL_MISC_TEST_PAGE);
if (oldpage < 0) {
mutex_unlock(&phydev->lock);
return oldpage;
}
ret = phy_read(phydev, MII_88E1121_MISC_TEST);
if (ret < 0)
......@@ -1766,7 +1781,7 @@ int m88e1510_get_temp_alarm(struct phy_device *phydev, long *alarm)
*alarm = !!(ret & MII_88E1510_MISC_TEST_TEMP_IRQ);
error:
phy_write(phydev, MII_M1145_PHY_EXT_ADDR_PAGE, 0x0);
marvell_set_page(phydev, oldpage);
mutex_unlock(&phydev->lock);
return ret;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment