Commit dba8e987 authored by Paul Cercueil's avatar Paul Cercueil

DRM: ingenic: Add support for Sharp panels

Add support for the LCD panels that must be driven with the
Sharp-specific signals SPL, CLS, REV, PS.

An example of such panel is the LS020B1DD01D supported by the
panel-simple DRM panel driver.
Signed-off-by: default avatarPaul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190627182114.27299-2-paul@crapouillou.net
# *** extracted tags ***
Reviewed-by: default avatarSam Ravnborg <sam@ravnborg.org>
parent ffa8aa00
......@@ -166,6 +166,8 @@ struct ingenic_drm {
struct ingenic_dma_hwdesc *dma_hwdesc;
dma_addr_t dma_hwdesc_phys;
bool panel_is_sharp;
};
static const u32 ingenic_drm_primary_formats[] = {
......@@ -283,6 +285,13 @@ static void ingenic_drm_crtc_update_timings(struct ingenic_drm *priv,
regmap_write(priv->map, JZ_REG_LCD_DAV,
vds << JZ_LCD_DAV_VDS_OFFSET |
vde << JZ_LCD_DAV_VDE_OFFSET);
if (priv->panel_is_sharp) {
regmap_write(priv->map, JZ_REG_LCD_PS, hde << 16 | (hde + 1));
regmap_write(priv->map, JZ_REG_LCD_CLS, hde << 16 | (hde + 1));
regmap_write(priv->map, JZ_REG_LCD_SPL, hpe << 16 | (hpe + 1));
regmap_write(priv->map, JZ_REG_LCD_REV, mode->htotal << 16);
}
}
static void ingenic_drm_crtc_update_ctrl(struct ingenic_drm *priv,
......@@ -378,11 +387,18 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
{
struct ingenic_drm *priv = drm_encoder_get_priv(encoder);
struct drm_display_mode *mode = &crtc_state->adjusted_mode;
struct drm_display_info *info = &conn_state->connector->display_info;
unsigned int cfg = JZ_LCD_CFG_PS_DISABLE
| JZ_LCD_CFG_CLS_DISABLE
| JZ_LCD_CFG_SPL_DISABLE
| JZ_LCD_CFG_REV_DISABLE;
struct drm_connector *conn = conn_state->connector;
struct drm_display_info *info = &conn->display_info;
unsigned int cfg;
priv->panel_is_sharp = info->bus_flags & DRM_BUS_FLAG_SHARP_SIGNALS;
if (priv->panel_is_sharp) {
cfg = JZ_LCD_CFG_MODE_SPECIAL_TFT_1 | JZ_LCD_CFG_REV_POLARITY;
} else {
cfg = JZ_LCD_CFG_PS_DISABLE | JZ_LCD_CFG_CLS_DISABLE
| JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
}
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
......@@ -393,7 +409,8 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
if (info->bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE)
cfg |= JZ_LCD_CFG_PCLK_FALLING_EDGE;
if (conn_state->connector->connector_type == DRM_MODE_CONNECTOR_TV) {
if (!priv->panel_is_sharp) {
if (conn->connector_type == DRM_MODE_CONNECTOR_TV) {
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
cfg |= JZ_LCD_CFG_MODE_TV_OUT_I;
else
......@@ -413,6 +430,7 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
break;
}
}
}
regmap_write(priv->map, JZ_REG_LCD_CFG, cfg);
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment