Merge branch 'ftgmac-rework-batch2-rx-path'

Benjamin Herrenschmidt says:

====================
ftgmac: Rework batch 2 - RX path

This is the second batch of updates to the ftgmac100 driver.

This one tackles the RX path of the driver, simplifying
it greatly to match common practice while significantly
increasing the performance.

(The bulk of the performance gains of my series will be
provided by the TX path improvements, notably fragmented
sends, these will be in the next batch).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/faraday/ftgmac100.h

@@ -227,10 +227,10 @@ struct ftgmac100_txdes {
  * Receive descriptor, aligned to 16 bytes
  */
 struct ftgmac100_rxdes {
-	unsigned int	rxdes0;
-	unsigned int	rxdes1;
-	unsigned int	rxdes2;	/* not used by HW */
-	unsigned int	rxdes3;	/* RXBUF_BADR */
+	__le32	rxdes0; /* Control & status bits */
+	__le32	rxdes1;	/* Checksum and vlan status */
+	__le32	rxdes2; /* length/type on AST2500 */
+	__le32	rxdes3;	/* DMA buffer address */
 } __attribute__ ((aligned(16)));
 
 #define FTGMAC100_RXDES0_VDBC		0x3fff
@@ -248,6 +248,14 @@ struct ftgmac100_rxdes {
 #define FTGMAC100_RXDES0_FRS		(1 << 29)
 #define FTGMAC100_RXDES0_RXPKT_RDY	(1 << 31)
 
+/* Errors we care about for dropping packets */
+#define RXDES0_ANY_ERROR		( \
+	FTGMAC100_RXDES0_RX_ERR		| \
+	FTGMAC100_RXDES0_CRC_ERR	| \
+	FTGMAC100_RXDES0_FTL		| \
+	FTGMAC100_RXDES0_RUNT		| \
+	FTGMAC100_RXDES0_RX_ODD_NB)
+
 #define FTGMAC100_RXDES1_VLANTAG_CI	0xffff
 #define FTGMAC100_RXDES1_PROT_MASK	(0x3 << 20)
 #define FTGMAC100_RXDES1_PROT_NONIP	(0x0 << 20)