mfd: qcom-spmi-pmic: Add specific compatible strings for Qualcomm's SPMI PMIC's

Some of the PMIC's could have specific regmap configuration
tables in future, so add specific compatible strings for known
PMIC's. Also print runtime detected chip revision information.
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.txt

@@ -15,9 +15,20 @@ each. A function can consume one or more of these fixed-size register regions.
 
 Required properties:
 - compatible:      Should contain one of:
-                     "qcom,pm8941"
-                     "qcom,pm8841"
-                     "qcom,pma8084"
+                   "qcom,pm8941",
+                   "qcom,pm8841",
+                   "qcom,pma8084",
+                   "qcom,pm8019",
+                   "qcom,pm8226",
+                   "qcom,pm8110",
+                   "qcom,pma8084",
+                   "qcom,pmi8962",
+                   "qcom,pmd9635",
+                   "qcom,pm8994",
+                   "qcom,pmi8994",
+                   "qcom,pm8916",
+                   "qcom,pm8004",
+                   "qcom,pm8909",
                    or generalized "qcom,spmi-pmic".
 - reg:             Specifies the SPMI USID slave address for this device.
                    For more information see:

drivers/mfd/qcom-spmi-pmic.c

@@ -17,6 +17,100 @@
 #include <linux/regmap.h>
 #include <linux/of_platform.h>
 
+#define PMIC_REV2		0x101
+#define PMIC_REV3		0x102
+#define PMIC_REV4		0x103
+#define PMIC_TYPE		0x104
+#define PMIC_SUBTYPE		0x105
+
+#define PMIC_TYPE_VALUE		0x51
+
+#define COMMON_SUBTYPE		0x00
+#define PM8941_SUBTYPE		0x01
+#define PM8841_SUBTYPE		0x02
+#define PM8019_SUBTYPE		0x03
+#define PM8226_SUBTYPE		0x04
+#define PM8110_SUBTYPE		0x05
+#define PMA8084_SUBTYPE		0x06
+#define PMI8962_SUBTYPE		0x07
+#define PMD9635_SUBTYPE		0x08
+#define PM8994_SUBTYPE		0x09
+#define PMI8994_SUBTYPE		0x0a
+#define PM8916_SUBTYPE		0x0b
+#define PM8004_SUBTYPE		0x0c
+#define PM8909_SUBTYPE		0x0d
+
+static const struct of_device_id pmic_spmi_id_table[] = {
+	{ .compatible = "qcom,spmi-pmic", .data = (void *)COMMON_SUBTYPE },
+	{ .compatible = "qcom,pm8941",    .data = (void *)PM8941_SUBTYPE },
+	{ .compatible = "qcom,pm8841",    .data = (void *)PM8841_SUBTYPE },
+	{ .compatible = "qcom,pm8019",    .data = (void *)PM8019_SUBTYPE },
+	{ .compatible = "qcom,pm8226",    .data = (void *)PM8226_SUBTYPE },
+	{ .compatible = "qcom,pm8110",    .data = (void *)PM8110_SUBTYPE },
+	{ .compatible = "qcom,pma8084",   .data = (void *)PMA8084_SUBTYPE },
+	{ .compatible = "qcom,pmi8962",   .data = (void *)PMI8962_SUBTYPE },
+	{ .compatible = "qcom,pmd9635",   .data = (void *)PMD9635_SUBTYPE },
+	{ .compatible = "qcom,pm8994",    .data = (void *)PM8994_SUBTYPE },
+	{ .compatible = "qcom,pmi8994",   .data = (void *)PMI8994_SUBTYPE },
+	{ .compatible = "qcom,pm8916",    .data = (void *)PM8916_SUBTYPE },
+	{ .compatible = "qcom,pm8004",    .data = (void *)PM8004_SUBTYPE },
+	{ .compatible = "qcom,pm8909",    .data = (void *)PM8909_SUBTYPE },
+	{ }
+};
+
+static void pmic_spmi_show_revid(struct regmap *map, struct device *dev)
+{
+	unsigned int rev2, minor, major, type, subtype;
+	const char *name = "unknown";
+	int ret, i;
+
+	ret = regmap_read(map, PMIC_TYPE, &type);
+	if (ret < 0)
+		return;
+
+	if (type != PMIC_TYPE_VALUE)
+		return;
+
+	ret = regmap_read(map, PMIC_SUBTYPE, &subtype);
+	if (ret < 0)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(pmic_spmi_id_table); i++) {
+		if (subtype == (unsigned long)pmic_spmi_id_table[i].data)
+			break;
+	}
+
+	if (i != ARRAY_SIZE(pmic_spmi_id_table))
+		name = pmic_spmi_id_table[i].compatible;
+
+	ret = regmap_read(map, PMIC_REV2, &rev2);
+	if (ret < 0)
+		return;
+
+	ret = regmap_read(map, PMIC_REV3, &minor);
+	if (ret < 0)
+		return;
+
+	ret = regmap_read(map, PMIC_REV4, &major);
+	if (ret < 0)
+		return;
+
+	/*
+	 * In early versions of PM8941 and PM8226, the major revision number
+	 * started incrementing from 0 (eg 0 = v1.0, 1 = v2.0).
+	 * Increment the major revision number here if the chip is an early
+	 * version of PM8941 or PM8226.
+	 */
+	if ((subtype == PM8941_SUBTYPE || subtype == PM8226_SUBTYPE) &&
+	    major < 0x02)
+		major++;
+
+	if (subtype == PM8110_SUBTYPE)
+		minor = rev2;
+
+	dev_dbg(dev, "%x: %s v%d.%d\n", subtype, name, major, minor);
+}
+
 static const struct regmap_config spmi_regmap_config = {
 	.reg_bits	= 16,
 	.val_bits	= 8,
@@ -33,6 +127,8 @@ static int pmic_spmi_probe(struct spmi_device *sdev)
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
+	pmic_spmi_show_revid(regmap, &sdev->dev);
+
 	return of_platform_populate(root, NULL, NULL, &sdev->dev);
 }
 
@@ -41,13 +137,6 @@ static void pmic_spmi_remove(struct spmi_device *sdev)
 	of_platform_depopulate(&sdev->dev);
 }
 
-static const struct of_device_id pmic_spmi_id_table[] = {
-	{ .compatible = "qcom,spmi-pmic" },
-	{ .compatible = "qcom,pm8941" },
-	{ .compatible = "qcom,pm8841" },
-	{ .compatible = "qcom,pma8084" },
-	{ }
-};
 MODULE_DEVICE_TABLE(of, pmic_spmi_id_table);
 
 static struct spmi_driver pmic_spmi_driver = {