Skip to content

L
linux
Commit dd5bd0a6 authored by Paolo Bonzini's avatar Paolo Bonzini
Browse files
Options

Merge tag 'kvm-s390-next-4.20-1' of... 

Merge tag 'kvm-s390-next-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Features for 4.20
- Initial version of AP crypto virtualization via vfio-mdev
- Set the host program identifier
- Optimize page table locking
parents 7e712684 55d09dd4
Hide whitespace changes
Inline Side-by-side
Showing with 2397 additions and 63 deletions
Documentation/s390/vfio-ap.txt 0 → 100644
View file @ dd5bd0a6
Introduction:
============
The Adjunct Processor (AP) facility is an IBM Z cryptographic facility comprised
of three AP instructions and from 1 up to 256 PCIe cryptographic adapter cards.
The AP devices provide cryptographic functions to all CPUs assigned to a
linux system running in an IBM Z system LPAR.
The AP adapter cards are exposed via the AP bus. The motivation for vfio-ap
is to make AP cards available to KVM guests using the VFIO mediated device
framework. This implementation relies considerably on the s390 virtualization
facilities which do most of the hard work of providing direct access to AP
devices.
AP Architectural Overview:
=========================
To facilitate the comprehension of the design, let's start with some
definitions:
* AP adapter
An AP adapter is an IBM Z adapter card that can perform cryptographic
functions. There can be from 0 to 256 adapters assigned to an LPAR. Adapters
assigned to the LPAR in which a linux host is running will be available to
the linux host. Each adapter is identified by a number from 0 to 255; however,
the maximum adapter number is determined by machine model and/or adapter type.
When installed, an AP adapter is accessed by AP instructions executed by any
CPU.
The AP adapter cards are assigned to a given LPAR via the system's Activation
Profile which can be edited via the HMC. When the linux host system is IPL'd
in the LPAR, the AP bus detects the AP adapter cards assigned to the LPAR and
creates a sysfs device for each assigned adapter. For example, if AP adapters
4 and 10 (0x0a) are assigned to the LPAR, the AP bus will create the following
sysfs device entries:
/sys/devices/ap/card04
/sys/devices/ap/card0a
Symbolic links to these devices will also be created in the AP bus devices
sub-directory:
/sys/bus/ap/devices/[card04]
/sys/bus/ap/devices/[card04]
* AP domain
An adapter is partitioned into domains. An adapter can hold up to 256 domains
depending upon the adapter type and hardware configuration. A domain is
identified by a number from 0 to 255; however, the maximum domain number is
determined by machine model and/or adapter type.. A domain can be thought of
as a set of hardware registers and memory used for processing AP commands. A
domain can be configured with a secure private key used for clear key
encryption. A domain is classified in one of two ways depending upon how it
may be accessed:
* Usage domains are domains that are targeted by an AP instruction to
process an AP command.
* Control domains are domains that are changed by an AP command sent to a
usage domain; for example, to set the secure private key for the control
domain.
The AP usage and control domains are assigned to a given LPAR via the system's
Activation Profile which can be edited via the HMC. When a linux host system
is IPL'd in the LPAR, the AP bus module detects the AP usage and control
domains assigned to the LPAR. The domain number of each usage domain and
adapter number of each AP adapter are combined to create AP queue devices
(see AP Queue section below). The domain number of each control domain will be
represented in a bitmask and stored in a sysfs file
/sys/bus/ap/ap_control_domain_mask. The bits in the mask, from most to least
significant bit, correspond to domains 0-255.
* AP Queue
An AP queue is the means by which an AP command is sent to a usage domain
inside a specific adapter. An AP queue is identified by a tuple
comprised of an AP adapter ID (APID) and an AP queue index (APQI). The
APQI corresponds to a given usage domain number within the adapter. This tuple
forms an AP Queue Number (APQN) uniquely identifying an AP queue. AP
instructions include a field containing the APQN to identify the AP queue to
which the AP command is to be sent for processing.
The AP bus will create a sysfs device for each APQN that can be derived from
the cross product of the AP adapter and usage domain numbers detected when the
AP bus module is loaded. For example, if adapters 4 and 10 (0x0a) and usage
domains 6 and 71 (0x47) are assigned to the LPAR, the AP bus will create the
following sysfs entries:
/sys/devices/ap/card04/04.0006
/sys/devices/ap/card04/04.0047
/sys/devices/ap/card0a/0a.0006
/sys/devices/ap/card0a/0a.0047
The following symbolic links to these devices will be created in the AP bus
devices subdirectory:
/sys/bus/ap/devices/[04.0006]
/sys/bus/ap/devices/[04.0047]
/sys/bus/ap/devices/[0a.0006]
/sys/bus/ap/devices/[0a.0047]
* AP Instructions:
There are three AP instructions:
* NQAP: to enqueue an AP command-request message to a queue
* DQAP: to dequeue an AP command-reply message from a queue
* PQAP: to administer the queues
AP instructions identify the domain that is targeted to process the AP
command; this must be one of the usage domains. An AP command may modify a
domain that is not one of the usage domains, but the modified domain
must be one of the control domains.
AP and SIE:
==========
Let's now take a look at how AP instructions executed on a guest are interpreted
by the hardware.
A satellite control block called the Crypto Control Block (CRYCB) is attached to
our main hardware virtualization control block. The CRYCB contains three fields
to identify the adapters, usage domains and control domains assigned to the KVM
guest:
* The AP Mask (APM) field is a bit mask that identifies the AP adapters assigned
to the KVM guest. Each bit in the mask, from left to right (i.e. from most
significant to least significant bit in big endian order), corresponds to
an APID from 0-255. If a bit is set, the corresponding adapter is valid for
use by the KVM guest.
* The AP Queue Mask (AQM) field is a bit mask identifying the AP usage domains
assigned to the KVM guest. Each bit in the mask, from left to right (i.e. from
most significant to least significant bit in big endian order), corresponds to
an AP queue index (APQI) from 0-255. If a bit is set, the corresponding queue
is valid for use by the KVM guest.
* The AP Domain Mask field is a bit mask that identifies the AP control domains
assigned to the KVM guest. The ADM bit mask controls which domains can be
changed by an AP command-request message sent to a usage domain from the
guest. Each bit in the mask, from left to right (i.e. from most significant to
least significant bit in big endian order), corresponds to a domain from
0-255. If a bit is set, the corresponding domain can be modified by an AP
command-request message sent to a usage domain.
If you recall from the description of an AP Queue, AP instructions include
an APQN to identify the AP queue to which an AP command-request message is to be
sent (NQAP and PQAP instructions), or from which a command-reply message is to
be received (DQAP instruction). The validity of an APQN is defined by the matrix
calculated from the APM and AQM; it is the cross product of all assigned adapter
numbers (APM) with all assigned queue indexes (AQM). For example, if adapters 1
and 2 and usage domains 5 and 6 are assigned to a guest, the APQNs (1,5), (1,6),
(2,5) and (2,6) will be valid for the guest.
The APQNs can provide secure key functionality - i.e., a private key is stored
on the adapter card for each of its domains - so each APQN must be assigned to
at most one guest or to the linux host.
Example 1: Valid configuration:
------------------------------
Guest1: adapters 1,2 domains 5,6
Guest2: adapter 1,2 domain 7
This is valid because both guests have a unique set of APQNs:
Guest1 has APQNs (1,5), (1,6), (2,5), (2,6);
Guest2 has APQNs (1,7), (2,7)
Example 2: Valid configuration:
------------------------------
Guest1: adapters 1,2 domains 5,6
Guest2: adapters 3,4 domains 5,6
This is also valid because both guests have a unique set of APQNs:
Guest1 has APQNs (1,5), (1,6), (2,5), (2,6);
Guest2 has APQNs (3,5), (3,6), (4,5), (4,6)
Example 3: Invalid configuration:
--------------------------------
Guest1: adapters 1,2 domains 5,6
Guest2: adapter 1 domains 6,7
This is an invalid configuration because both guests have access to
APQN (1,6).
The Design:
===========
The design introduces three new objects:
1. AP matrix device
2. VFIO AP device driver (vfio_ap.ko)
3. VFIO AP mediated matrix pass-through device
The VFIO AP device driver
-------------------------
The VFIO AP (vfio_ap) device driver serves the following purposes:
1. Provides the interfaces to secure APQNs for exclusive use of KVM guests.
2. Sets up the VFIO mediated device interfaces to manage a mediated matrix
device and creates the sysfs interfaces for assigning adapters, usage
domains, and control domains comprising the matrix for a KVM guest.
3. Configures the APM, AQM and ADM in the CRYCB referenced by a KVM guest's
SIE state description to grant the guest access to a matrix of AP devices
Reserve APQNs for exclusive use of KVM guests
---------------------------------------------
The following block diagram illustrates the mechanism by which APQNs are
reserved:
+------------------+
7 remove | |
+--------------------> cex4queue driver |
| | |
| +------------------+
|
|
| +------------------+ +-----------------+
| 5 register driver | | 3 create | |
| +----------------> Device core +----------> matrix device |
| | | | | |
| | +--------^---------+ +-----------------+
| | |
| | +-------------------+
| | +-----------------------------------+ |
| | | 4 register AP driver | | 2 register device
| | | | |
+--------+---+-v---+ +--------+-------+-+
| | | |
| ap_bus +--------------------- > vfio_ap driver |
| | 8 probe | |
+--------^---------+ +--^--^------------+
6 edit | | |
apmask | +-----------------------------+ | 9 mdev create
aqmask | | 1 modprobe |
+--------+-----+---+ +----------------+-+ +------------------+
| | | |8 create | mediated |
| admin | | VFIO device core |---------> matrix |
| + | | | device |
+------+-+---------+ +--------^---------+ +--------^---------+
| | | |
| | 9 create vfio_ap-passthrough | |
| +------------------------------+ |
+-------------------------------------------------------------+
10 assign adapter/domain/control domain
The process for reserving an AP queue for use by a KVM guest is:
1. The administrator loads the vfio_ap device driver
2. The vfio-ap driver during its initialization will register a single 'matrix'
device with the device core. This will serve as the parent device for
all mediated matrix devices used to configure an AP matrix for a guest.
3. The /sys/devices/vfio_ap/matrix device is created by the device core
4 The vfio_ap device driver will register with the AP bus for AP queue devices
of type 10 and higher (CEX4 and newer). The driver will provide the vfio_ap
driver's probe and remove callback interfaces. Devices older than CEX4 queues
are not supported to simplify the implementation by not needlessly
complicating the design by supporting older devices that will go out of
service in the relatively near future, and for which there are few older
systems around on which to test.
5. The AP bus registers the vfio_ap device driver with the device core
6. The administrator edits the AP adapter and queue masks to reserve AP queues
for use by the vfio_ap device driver.
7. The AP bus removes the AP queues reserved for the vfio_ap driver from the
default zcrypt cex4queue driver.
8. The AP bus probes the vfio_ap device driver to bind the queues reserved for
it.
9. The administrator creates a passthrough type mediated matrix device to be
used by a guest
10 The administrator assigns the adapters, usage domains and control domains
to be exclusively used by a guest.
Set up the VFIO mediated device interfaces
------------------------------------------
The VFIO AP device driver utilizes the common interface of the VFIO mediated
device core driver to:
* Register an AP mediated bus driver to add a mediated matrix device to and
remove it from a VFIO group.
* Create and destroy a mediated matrix device
* Add a mediated matrix device to and remove it from the AP mediated bus driver
* Add a mediated matrix device to and remove it from an IOMMU group
The following high-level block diagram shows the main components and interfaces
of the VFIO AP mediated matrix device driver:
+-------------+
| |
| +---------+ | mdev_register_driver() +--------------+
| | Mdev | +<-----------------------+ |
| | bus | | | vfio_mdev.ko |
| | driver | +----------------------->+ |<-> VFIO user
| +---------+ | probe()/remove() +--------------+ APIs
| |
| MDEV CORE |
| MODULE |
| mdev.ko |
| +---------+ | mdev_register_device() +--------------+
| |Physical | +<-----------------------+ |
| | device | | | vfio_ap.ko |<-> matrix
| |interface| +----------------------->+ | device
| +---------+ | callback +--------------+
+-------------+
During initialization of the vfio_ap module, the matrix device is registered
with an 'mdev_parent_ops' structure that provides the sysfs attribute
structures, mdev functions and callback interfaces for managing the mediated
matrix device.
* sysfs attribute structures:
* supported_type_groups
The VFIO mediated device framework supports creation of user-defined
mediated device types. These mediated device types are specified
via the 'supported_type_groups' structure when a device is registered
with the mediated device framework. The registration process creates the
sysfs structures for each mediated device type specified in the
'mdev_supported_types' sub-directory of the device being registered. Along
with the device type, the sysfs attributes of the mediated device type are
provided.
The VFIO AP device driver will register one mediated device type for
passthrough devices:
/sys/devices/vfio_ap/matrix/mdev_supported_types/vfio_ap-passthrough
Only the read-only attributes required by the VFIO mdev framework will
be provided:
... name
... device_api
... available_instances
... device_api
Where:
* name: specifies the name of the mediated device type
* device_api: the mediated device type's API
* available_instances: the number of mediated matrix passthrough devices
that can be created
* device_api: specifies the VFIO API
* mdev_attr_groups
This attribute group identifies the user-defined sysfs attributes of the
mediated device. When a device is registered with the VFIO mediated device
framework, the sysfs attribute files identified in the 'mdev_attr_groups'
structure will be created in the mediated matrix device's directory. The
sysfs attributes for a mediated matrix device are:
* assign_adapter:
* unassign_adapter:
Write-only attributes for assigning/unassigning an AP adapter to/from the
mediated matrix device. To assign/unassign an adapter, the APID of the
adapter is echoed to the respective attribute file.
* assign_domain:
* unassign_domain:
Write-only attributes for assigning/unassigning an AP usage domain to/from
the mediated matrix device. To assign/unassign a domain, the domain
number of the the usage domain is echoed to the respective attribute
file.
* matrix:
A read-only file for displaying the APQNs derived from the cross product
of the adapter and domain numbers assigned to the mediated matrix device.
* assign_control_domain:
* unassign_control_domain:
Write-only attributes for assigning/unassigning an AP control domain
to/from the mediated matrix device. To assign/unassign a control domain,
the ID of the domain to be assigned/unassigned is echoed to the respective
attribute file.
* control_domains:
A read-only file for displaying the control domain numbers assigned to the
mediated matrix device.
* functions:
* create:
allocates the ap_matrix_mdev structure used by the vfio_ap driver to:
* Store the reference to the KVM structure for the guest using the mdev
* Store the AP matrix configuration for the adapters, domains, and control
domains assigned via the corresponding sysfs attributes files
* remove:
deallocates the mediated matrix device's ap_matrix_mdev structure. This will
be allowed only if a running guest is not using the mdev.
* callback interfaces
* open:
The vfio_ap driver uses this callback to register a
VFIO_GROUP_NOTIFY_SET_KVM notifier callback function for the mdev matrix
device. The open is invoked when QEMU connects the VFIO iommu group
for the mdev matrix device to the MDEV bus. Access to the KVM structure used
to configure the KVM guest is provided via this callback. The KVM structure,
is used to configure the guest's access to the AP matrix defined via the
mediated matrix device's sysfs attribute files.
* release:
unregisters the VFIO_GROUP_NOTIFY_SET_KVM notifier callback function for the
mdev matrix device and deconfigures the guest's AP matrix.
Configure the APM, AQM and ADM in the CRYCB:
-------------------------------------------
Configuring the AP matrix for a KVM guest will be performed when the
VFIO_GROUP_NOTIFY_SET_KVM notifier callback is invoked. The notifier
function is called when QEMU connects to KVM. The guest's AP matrix is
configured via it's CRYCB by:
* Setting the bits in the APM corresponding to the APIDs assigned to the
mediated matrix device via its 'assign_adapter' interface.
* Setting the bits in the AQM corresponding to the domains assigned to the
mediated matrix device via its 'assign_domain' interface.
* Setting the bits in the ADM corresponding to the domain dIDs assigned to the
mediated matrix device via its 'assign_control_domains' interface.
The CPU model features for AP
-----------------------------
The AP stack relies on the presence of the AP instructions as well as two
facilities: The AP Facilities Test (APFT) facility; and the AP Query
Configuration Information (QCI) facility. These features/facilities are made
available to a KVM guest via the following CPU model features:
1. ap: Indicates whether the AP instructions are installed on the guest. This
feature will be enabled by KVM only if the AP instructions are installed
on the host.
2. apft: Indicates the APFT facility is available on the guest. This facility
can be made available to the guest only if it is available on the host (i.e.,
facility bit 15 is set).
3. apqci: Indicates the AP QCI facility is available on the guest. This facility
can be made available to the guest only if it is available on the host (i.e.,
facility bit 12 is set).
Note: If the user chooses to specify a CPU model different than the 'host'
model to QEMU, the CPU model features and facilities need to be turned on
explicitly; for example:
/usr/bin/qemu-system-s390x ... -cpu z13,ap=on,apqci=on,apft=on
A guest can be precluded from using AP features/facilities by turning them off
explicitly; for example:
/usr/bin/qemu-system-s390x ... -cpu host,ap=off,apqci=off,apft=off
Note: If the APFT facility is turned off (apft=off) for the guest, the guest
will not see any AP devices. The zcrypt device drivers that register for type 10
and newer AP devices - i.e., the cex4card and cex4queue device drivers - need
the APFT facility to ascertain the facilities installed on a given AP device. If
the APFT facility is not installed on the guest, then the probe of device
drivers will fail since only type 10 and newer devices can be configured for
guest use.
Example:
=======
Let's now provide an example to illustrate how KVM guests may be given
access to AP facilities. For this example, we will show how to configure
three guests such that executing the lszcrypt command on the guests would
look like this:
Guest1
------
CARD.DOMAIN TYPE MODE
------------------------------
05 CEX5C CCA-Coproc
05.0004 CEX5C CCA-Coproc
05.00ab CEX5C CCA-Coproc
06 CEX5A Accelerator
06.0004 CEX5A Accelerator
06.00ab CEX5C CCA-Coproc
Guest2
------
CARD.DOMAIN TYPE MODE
------------------------------
05 CEX5A Accelerator
05.0047 CEX5A Accelerator
05.00ff CEX5A Accelerator
Guest2
------
CARD.DOMAIN TYPE MODE
------------------------------
06 CEX5A Accelerator
06.0047 CEX5A Accelerator
06.00ff CEX5A Accelerator
These are the steps:
1. Install the vfio_ap module on the linux host. The dependency chain for the
vfio_ap module is:
* iommu
* s390
* zcrypt
* vfio
* vfio_mdev
* vfio_mdev_device
* KVM
To build the vfio_ap module, the kernel build must be configured with the
following Kconfig elements selected:
* IOMMU_SUPPORT
* S390
* ZCRYPT
* S390_AP_IOMMU
* VFIO
* VFIO_MDEV
* VFIO_MDEV_DEVICE
* KVM
If using make menuconfig select the following to build the vfio_ap module:
-> Device Drivers
-> IOMMU Hardware Support
select S390 AP IOMMU Support
-> VFIO Non-Privileged userspace driver framework
-> Mediated device driver frramework
-> VFIO driver for Mediated devices
-> I/O subsystem
-> VFIO support for AP devices
2. Secure the AP queues to be used by the three guests so that the host can not
access them. To secure them, there are two sysfs files that specify
bitmasks marking a subset of the APQN range as 'usable by the default AP
queue device drivers' or 'not usable by the default device drivers' and thus
available for use by the vfio_ap device driver'. The location of the sysfs
files containing the masks are:
/sys/bus/ap/apmask
/sys/bus/ap/aqmask
The 'apmask' is a 256-bit mask that identifies a set of AP adapter IDs
(APID). Each bit in the mask, from left to right (i.e., from most significant
to least significant bit in big endian order), corresponds to an APID from
0-255. If a bit is set, the APID is marked as usable only by the default AP
queue device drivers; otherwise, the APID is usable by the vfio_ap
device driver.
The 'aqmask' is a 256-bit mask that identifies a set of AP queue indexes
(APQI). Each bit in the mask, from left to right (i.e., from most significant
to least significant bit in big endian order), corresponds to an APQI from
0-255. If a bit is set, the APQI is marked as usable only by the default AP
queue device drivers; otherwise, the APQI is usable by the vfio_ap device
driver.
Take, for example, the following mask:
0x7dffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
It indicates:
1, 2, 3, 4, 5, and 7-255 belong to the default drivers' pool, and 0 and 6
belong to the vfio_ap device driver's pool.
The APQN of each AP queue device assigned to the linux host is checked by the
AP bus against the set of APQNs derived from the cross product of APIDs
and APQIs marked as usable only by the default AP queue device drivers. If a
match is detected, only the default AP queue device drivers will be probed;
otherwise, the vfio_ap device driver will be probed.
By default, the two masks are set to reserve all APQNs for use by the default
AP queue device drivers. There are two ways the default masks can be changed:
1. The sysfs mask files can be edited by echoing a string into the
respective sysfs mask file in one of two formats:
* An absolute hex string starting with 0x - like "0x12345678" - sets
the mask. If the given string is shorter than the mask, it is padded
with 0s on the right; for example, specifying a mask value of 0x41 is
the same as specifying:
0x4100000000000000000000000000000000000000000000000000000000000000
Keep in mind that the mask reads from left to right (i.e., most
significant to least significant bit in big endian order), so the mask
above identifies device numbers 1 and 7 (01000001).
If the string is longer than the mask, the operation is terminated with
an error (EINVAL).
* Individual bits in the mask can be switched on and off by specifying
each bit number to be switched in a comma separated list. Each bit
number string must be prepended with a ('+') or minus ('-') to indicate
the corresponding bit is to be switched on ('+') or off ('-'). Some
valid values are:
"+0" switches bit 0 on
"-13" switches bit 13 off
"+0x41" switches bit 65 on
"-0xff" switches bit 255 off
The following example:
+0,-6,+0x47,-0xf0
Switches bits 0 and 71 (0x47) on
Switches bits 6 and 240 (0xf0) off
Note that the bits not specified in the list remain as they were before
the operation.
2. The masks can also be changed at boot time via parameters on the kernel
command line like this:
ap.apmask=0xffff ap.aqmask=0x40
This would create the following masks:
apmask:
0xffff000000000000000000000000000000000000000000000000000000000000
aqmask:
0x4000000000000000000000000000000000000000000000000000000000000000
Resulting in these two pools:
default drivers pool: adapter 0-15, domain 1
alternate drivers pool: adapter 16-255, domains 0, 2-255
Securing the APQNs for our example:
----------------------------------
To secure the AP queues 05.0004, 05.0047, 05.00ab, 05.00ff, 06.0004, 06.0047,
06.00ab, and 06.00ff for use by the vfio_ap device driver, the corresponding
APQNs can either be removed from the default masks:
echo -5,-6 > /sys/bus/ap/apmask
echo -4,-0x47,-0xab,-0xff > /sys/bus/ap/aqmask
Or the masks can be set as follows:
echo 0xf9ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
> apmask
echo 0xf7fffffffffffffffeffffffffffffffffffffffffeffffffffffffffffffffe \
> aqmask
This will result in AP queues 05.0004, 05.0047, 05.00ab, 05.00ff, 06.0004,
06.0047, 06.00ab, and 06.00ff getting bound to the vfio_ap device driver. The
sysfs directory for the vfio_ap device driver will now contain symbolic links
to the AP queue devices bound to it:
/sys/bus/ap
... [drivers]
...... [vfio_ap]
......... [05.0004]
......... [05.0047]
......... [05.00ab]
......... [05.00ff]
......... [06.0004]
......... [06.0047]
......... [06.00ab]
......... [06.00ff]
Keep in mind that only type 10 and newer adapters (i.e., CEX4 and later)
can be bound to the vfio_ap device driver. The reason for this is to
simplify the implementation by not needlessly complicating the design by
supporting older devices that will go out of service in the relatively near
future and for which there are few older systems on which to test.
The administrator, therefore, must take care to secure only AP queues that
can be bound to the vfio_ap device driver. The device type for a given AP
queue device can be read from the parent card's sysfs directory. For example,
to see the hardware type of the queue 05.0004:
cat /sys/bus/ap/devices/card05/hwtype
The hwtype must be 10 or higher (CEX4 or newer) in order to be bound to the
vfio_ap device driver.
3. Create the mediated devices needed to configure the AP matrixes for the
three guests and to provide an interface to the vfio_ap driver for
use by the guests:
/sys/devices/vfio_ap/matrix/
--- [mdev_supported_types]
------ [vfio_ap-passthrough] (passthrough mediated matrix device type)
--------- create
--------- [devices]
To create the mediated devices for the three guests:
uuidgen > create
uuidgen > create
uuidgen > create
or
echo $uuid1 > create
echo $uuid2 > create
echo $uuid3 > create
This will create three mediated devices in the [devices] subdirectory named
after the UUID written to the create attribute file. We call them $uuid1,
$uuid2 and $uuid3 and this is the sysfs directory structure after creation:
/sys/devices/vfio_ap/matrix/
--- [mdev_supported_types]
------ [vfio_ap-passthrough]
--------- [devices]
------------ [$uuid1]
--------------- assign_adapter
--------------- assign_control_domain
--------------- assign_domain
--------------- matrix
--------------- unassign_adapter
--------------- unassign_control_domain
--------------- unassign_domain
------------ [$uuid2]
--------------- assign_adapter
--------------- assign_control_domain
--------------- assign_domain
--------------- matrix
--------------- unassign_adapter
----------------unassign_control_domain
----------------unassign_domain
------------ [$uuid3]
--------------- assign_adapter
--------------- assign_control_domain
--------------- assign_domain
--------------- matrix
--------------- unassign_adapter
----------------unassign_control_domain
----------------unassign_domain
4. The administrator now needs to configure the matrixes for the mediated
devices $uuid1 (for Guest1), $uuid2 (for Guest2) and $uuid3 (for Guest3).
This is how the matrix is configured for Guest1:
echo 5 > assign_adapter
echo 6 > assign_adapter
echo 4 > assign_domain
echo 0xab > assign_domain
Control domains can similarly be assigned using the assign_control_domain
sysfs file.
If a mistake is made configuring an adapter, domain or control domain,
you can use the unassign_xxx files to unassign the adapter, domain or
control domain.
To display the matrix configuration for Guest1:
cat matrix
This is how the matrix is configured for Guest2:
echo 5 > assign_adapter
echo 0x47 > assign_domain
echo 0xff > assign_domain
This is how the matrix is configured for Guest3:
echo 6 > assign_adapter
echo 0x47 > assign_domain
echo 0xff > assign_domain
In order to successfully assign an adapter:
* The adapter number specified must represent a value from 0 up to the
maximum adapter number configured for the system. If an adapter number
higher than the maximum is specified, the operation will terminate with
an error (ENODEV).
* All APQNs that can be derived from the adapter ID and the IDs of
the previously assigned domains must be bound to the vfio_ap device
driver. If no domains have yet been assigned, then there must be at least
one APQN with the specified APID bound to the vfio_ap driver. If no such
APQNs are bound to the driver, the operation will terminate with an
error (EADDRNOTAVAIL).
No APQN that can be derived from the adapter ID and the IDs of the
previously assigned domains can be assigned to another mediated matrix
device. If an APQN is assigned to another mediated matrix device, the
operation will terminate with an error (EADDRINUSE).
In order to successfully assign a domain:
* The domain number specified must represent a value from 0 up to the
maximum domain number configured for the system. If a domain number
higher than the maximum is specified, the operation will terminate with
an error (ENODEV).
* All APQNs that can be derived from the domain ID and the IDs of
the previously assigned adapters must be bound to the vfio_ap device
driver. If no domains have yet been assigned, then there must be at least
one APQN with the specified APQI bound to the vfio_ap driver. If no such
APQNs are bound to the driver, the operation will terminate with an
error (EADDRNOTAVAIL).
No APQN that can be derived from the domain ID and the IDs of the
previously assigned adapters can be assigned to another mediated matrix
device. If an APQN is assigned to another mediated matrix device, the
operation will terminate with an error (EADDRINUSE).
In order to successfully assign a control domain, the domain number
specified must represent a value from 0 up to the maximum domain number
configured for the system. If a control domain number higher than the maximum
is specified, the operation will terminate with an error (ENODEV).
5. Start Guest1:
/usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
-device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid1 ...
7. Start Guest2:
/usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
-device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid2 ...
7. Start Guest3:
/usr/bin/qemu-system-s390x ... -cpu host,ap=on,apqci=on,apft=on \
-device vfio-ap,sysfsdev=/sys/devices/vfio_ap/matrix/$uuid3 ...
When the guest is shut down, the mediated matrix devices may be removed.
Using our example again, to remove the mediated matrix device $uuid1:
/sys/devices/vfio_ap/matrix/
--- [mdev_supported_types]
------ [vfio_ap-passthrough]
--------- [devices]
------------ [$uuid1]
--------------- remove
echo 1 > remove
This will remove all of the mdev matrix device's sysfs structures including
the mdev device itself. To recreate and reconfigure the mdev matrix device,
all of the steps starting with step 3 will have to be performed again. Note
that the remove will fail if a guest using the mdev is still running.
It is not necessary to remove an mdev matrix device, but one may want to
remove it if no guest will use it during the remaining lifetime of the linux
host. If the mdev matrix device is removed, one may want to also reconfigure
the pool of adapters and queues reserved for use by the default drivers.
Limitations
===========
* The KVM/kernel interfaces do not provide a way to prevent restoring an APQN
to the default drivers pool of a queue that is still assigned to a mediated
device in use by a guest. It is incumbent upon the administrator to
ensure there is no mediated device in use by a guest to which the APQN is
assigned lest the host be given access to the private data of the AP queue
device such as a private key configured specifically for the guest.
* Dynamically modifying the AP matrix for a running guest (which would amount to
hot(un)plug of AP devices for the guest) is currently not supported
* Live guest migration is not supported for guests using AP devices.
MAINTAINERS
View file @ dd5bd0a6
......@@ -12668,6 +12668,18 @@ W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
F: drivers/s390/crypto/
S390 VFIO AP DRIVER
M: Tony Krowiak <akrowiak@linux.ibm.com>
M: Pierre Morel <pmorel@linux.ibm.com>
M: Halil Pasic <pasic@linux.ibm.com>
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
F: drivers/s390/crypto/vfio_ap_drv.c
F: drivers/s390/crypto/vfio_ap_private.h
F: drivers/s390/crypto/vfio_ap_ops.c
F: Documentation/s390/vfio-ap.txt
S390 ZFCP DRIVER
M: Steffen Maier <maier@linux.ibm.com>
M: Benjamin Block <bblock@linux.ibm.com>
......
arch/s390/Kconfig
View file @ dd5bd0a6
......@@ -773,6 +773,17 @@ config VFIO_CCW
To compile this driver as a module, choose M here: the
module will be called vfio_ccw.
config VFIO_AP
def_tristate n
prompt "VFIO support for AP devices"
depends on S390_AP_IOMMU && VFIO_MDEV_DEVICE && KVM
help
This driver grants access to Adjunct Processor (AP) devices
via the VFIO mediated device interface.
To compile this driver as a module, choose M here: the module
will be called vfio_ap.
endmenu
menu "Dump support"
......
arch/s390/include/asm/kvm_host.h
View file @ dd5bd0a6
......@@ -44,6 +44,7 @@
#define KVM_REQ_ICPT_OPEREXC KVM_ARCH_REQ(2)
#define KVM_REQ_START_MIGRATION KVM_ARCH_REQ(3)
#define KVM_REQ_STOP_MIGRATION KVM_ARCH_REQ(4)
#define KVM_REQ_VSIE_RESTART KVM_ARCH_REQ(5)
#define SIGP_CTRL_C 0x80
#define SIGP_CTRL_SCN_MASK 0x3f
......@@ -186,6 +187,7 @@ struct kvm_s390_sie_block {
#define ECA_AIV 0x00200000
#define ECA_VX 0x00020000
#define ECA_PROTEXCI 0x00002000
#define ECA_APIE 0x00000008
#define ECA_SII 0x00000001
__u32 eca; /* 0x004c */
#define ICPT_INST 0x04
......@@ -237,7 +239,11 @@ struct kvm_s390_sie_block {
psw_t gpsw; /* 0x0090 */
__u64 gg14; /* 0x00a0 */
__u64 gg15; /* 0x00a8 */
__u8 reservedb0[20]; /* 0x00b0 */
__u8 reservedb0[8]; /* 0x00b0 */
#define HPID_KVM 0x4
#define HPID_VSIE 0x5
__u8 hpid; /* 0x00b8 */
__u8 reservedb9[11]; /* 0x00b9 */
__u16 extcpuaddr; /* 0x00c4 */
__u16 eic; /* 0x00c6 */
__u32 reservedc8; /* 0x00c8 */
......@@ -255,6 +261,8 @@ struct kvm_s390_sie_block {
__u8 reservede4[4]; /* 0x00e4 */
__u64 tecmc; /* 0x00e8 */
__u8 reservedf0[12]; /* 0x00f0 */
#define CRYCB_FORMAT_MASK 0x00000003
#define CRYCB_FORMAT0 0x00000000
#define CRYCB_FORMAT1 0x00000001
#define CRYCB_FORMAT2 0x00000003
__u32 crycbd; /* 0x00fc */
......@@ -715,6 +723,7 @@ struct kvm_s390_crypto {
__u32 crycbd;
__u8 aes_kw;
__u8 dea_kw;
__u8 apie;
};
#define APCB0_MASK_SIZE 1
......@@ -855,6 +864,8 @@ void kvm_arch_async_page_not_present(struct kvm_vcpu *vcpu,
void kvm_arch_async_page_present(struct kvm_vcpu *vcpu,
struct kvm_async_pf *work);
void kvm_arch_crypto_clear_masks(struct kvm *kvm);
extern int sie64a(struct kvm_s390_sie_block *, u64 *);
extern char sie_exit;
......
arch/s390/include/uapi/asm/kvm.h
View file @ dd5bd0a6
......@@ -160,6 +160,8 @@ struct kvm_s390_vm_cpu_subfunc {
#define KVM_S390_VM_CRYPTO_ENABLE_DEA_KW 1
#define KVM_S390_VM_CRYPTO_DISABLE_AES_KW 2
#define KVM_S390_VM_CRYPTO_DISABLE_DEA_KW 3
#define KVM_S390_VM_CRYPTO_ENABLE_APIE 4
#define KVM_S390_VM_CRYPTO_DISABLE_APIE 5
/* kvm attributes for migration mode */
#define KVM_S390_VM_MIGRATION_STOP 0
......
arch/s390/kvm/kvm-s390.c
View file @ dd5bd0a6
......@@ -40,6 +40,7 @@
#include <asm/sclp.h>
#include <asm/cpacf.h>
#include <asm/timex.h>
#include <asm/ap.h>
#include "kvm-s390.h"
#include "gaccess.h"
......@@ -844,20 +845,22 @@ void kvm_s390_vcpu_crypto_reset_all(struct kvm *kvm)
kvm_s390_vcpu_block_all(kvm);
kvm_for_each_vcpu(i, vcpu, kvm)
kvm_for_each_vcpu(i, vcpu, kvm) {
kvm_s390_vcpu_crypto_setup(vcpu);
/* recreate the shadow crycb by leaving the VSIE handler */
kvm_s390_sync_request(KVM_REQ_VSIE_RESTART, vcpu);
}
kvm_s390_vcpu_unblock_all(kvm);
}
static int kvm_s390_vm_set_crypto(struct kvm *kvm, struct kvm_device_attr *attr)
{
if (!test_kvm_facility(kvm, 76))
return -EINVAL;
mutex_lock(&kvm->lock);
switch (attr->attr) {
case KVM_S390_VM_CRYPTO_ENABLE_AES_KW:
if (!test_kvm_facility(kvm, 76))
return -EINVAL;
get_random_bytes(
kvm->arch.crypto.crycb->aes_wrapping_key_mask,
sizeof(kvm->arch.crypto.crycb->aes_wrapping_key_mask));
......@@ -865,6 +868,8 @@ static int kvm_s390_vm_set_crypto(struct kvm *kvm, struct kvm_device_attr *attr)
VM_EVENT(kvm, 3, "%s", "ENABLE: AES keywrapping support");
break;
case KVM_S390_VM_CRYPTO_ENABLE_DEA_KW:
if (!test_kvm_facility(kvm, 76))
return -EINVAL;
get_random_bytes(
kvm->arch.crypto.crycb->dea_wrapping_key_mask,
sizeof(kvm->arch.crypto.crycb->dea_wrapping_key_mask));
......@@ -872,17 +877,35 @@ static int kvm_s390_vm_set_crypto(struct kvm *kvm, struct kvm_device_attr *attr)
VM_EVENT(kvm, 3, "%s", "ENABLE: DEA keywrapping support");
break;
case KVM_S390_VM_CRYPTO_DISABLE_AES_KW:
if (!test_kvm_facility(kvm, 76))
return -EINVAL;
kvm->arch.crypto.aes_kw = 0;
memset(kvm->arch.crypto.crycb->aes_wrapping_key_mask, 0,
sizeof(kvm->arch.crypto.crycb->aes_wrapping_key_mask));
VM_EVENT(kvm, 3, "%s", "DISABLE: AES keywrapping support");
break;
case KVM_S390_VM_CRYPTO_DISABLE_DEA_KW:
if (!test_kvm_facility(kvm, 76))
return -EINVAL;
kvm->arch.crypto.dea_kw = 0;
memset(kvm->arch.crypto.crycb->dea_wrapping_key_mask, 0,
sizeof(kvm->arch.crypto.crycb->dea_wrapping_key_mask));
VM_EVENT(kvm, 3, "%s", "DISABLE: DEA keywrapping support");
break;
case KVM_S390_VM_CRYPTO_ENABLE_APIE:
if (!ap_instructions_available()) {
mutex_unlock(&kvm->lock);
return -EOPNOTSUPP;
}
kvm->arch.crypto.apie = 1;
break;
case KVM_S390_VM_CRYPTO_DISABLE_APIE:
if (!ap_instructions_available()) {
mutex_unlock(&kvm->lock);
return -EOPNOTSUPP;
}
kvm->arch.crypto.apie = 0;
break;
default:
mutex_unlock(&kvm->lock);
return -ENXIO;
......@@ -1491,6 +1514,10 @@ static int kvm_s390_vm_has_attr(struct kvm *kvm, struct kvm_device_attr *attr)
case KVM_S390_VM_CRYPTO_DISABLE_DEA_KW:
ret = 0;
break;
case KVM_S390_VM_CRYPTO_ENABLE_APIE:
case KVM_S390_VM_CRYPTO_DISABLE_APIE:
ret = ap_instructions_available() ? 0 : -ENXIO;
break;
default:
ret = -ENXIO;
break;
......@@ -1992,55 +2019,60 @@ long kvm_arch_vm_ioctl(struct file *filp,
return r;
}
static int kvm_s390_query_ap_config(u8 *config)
{
u32 fcn_code = 0x04000000UL;
u32 cc = 0;
memset(config, 0, 128);
asm volatile(
"lgr 0,%1\n"
"lgr 2,%2\n"
".long 0xb2af0000\n" /* PQAP(QCI) */
"0: ipm %0\n"
"srl %0,28\n"
"1:\n"
EX_TABLE(0b, 1b)
: "+r" (cc)
: "r" (fcn_code), "r" (config)
: "cc", "0", "2", "memory"
);
return cc;
}
static int kvm_s390_apxa_installed(void)
{
u8 config[128];
int cc;
if (test_facility(12)) {
cc = kvm_s390_query_ap_config(config);
struct ap_config_info info;
if (cc)
pr_err("PQAP(QCI) failed with cc=%d", cc);
else
return config[0] & 0x40;
if (ap_instructions_available()) {
if (ap_qci(&info) == 0)
return info.apxa;
}
return 0;
}
/*
* The format of the crypto control block (CRYCB) is specified in the 3 low
* order bits of the CRYCB designation (CRYCBD) field as follows:
* Format 0: Neither the message security assist extension 3 (MSAX3) nor the
* AP extended addressing (APXA) facility are installed.
* Format 1: The APXA facility is not installed but the MSAX3 facility is.
* Format 2: Both the APXA and MSAX3 facilities are installed
*/
static void kvm_s390_set_crycb_format(struct kvm *kvm)
{
kvm->arch.crypto.crycbd = (__u32)(unsigned long) kvm->arch.crypto.crycb;
/* Clear the CRYCB format bits - i.e., set format 0 by default */
kvm->arch.crypto.crycbd &= ~(CRYCB_FORMAT_MASK);
/* Check whether MSAX3 is installed */
if (!test_kvm_facility(kvm, 76))
return;
if (kvm_s390_apxa_installed())
kvm->arch.crypto.crycbd |= CRYCB_FORMAT2;
else
kvm->arch.crypto.crycbd |= CRYCB_FORMAT1;
}
void kvm_arch_crypto_clear_masks(struct kvm *kvm)
{
mutex_lock(&kvm->lock);
kvm_s390_vcpu_block_all(kvm);
memset(&kvm->arch.crypto.crycb->apcb0, 0,
sizeof(kvm->arch.crypto.crycb->apcb0));
memset(&kvm->arch.crypto.crycb->apcb1, 0,
sizeof(kvm->arch.crypto.crycb->apcb1));
/* recreate the shadow crycb for each vcpu */
kvm_s390_sync_request_broadcast(kvm, KVM_REQ_VSIE_RESTART);
kvm_s390_vcpu_unblock_all(kvm);
mutex_unlock(&kvm->lock);
}
EXPORT_SYMBOL_GPL(kvm_arch_crypto_clear_masks);
static u64 kvm_s390_get_initial_cpuid(void)
{
struct cpuid cpuid;
......@@ -2052,12 +2084,12 @@ static u64 kvm_s390_get_initial_cpuid(void)
static void kvm_s390_crypto_init(struct kvm *kvm)
{
if (!test_kvm_facility(kvm, 76))
return;
kvm->arch.crypto.crycb = &kvm->arch.sie_page2->crycb;
kvm_s390_set_crycb_format(kvm);
if (!test_kvm_facility(kvm, 76))
return;
/* Enable AES/DEA protected key functions by default */
kvm->arch.crypto.aes_kw = 1;
kvm->arch.crypto.dea_kw = 1;
......@@ -2583,17 +2615,25 @@ void kvm_arch_vcpu_postcreate(struct kvm_vcpu *vcpu)
static void kvm_s390_vcpu_crypto_setup(struct kvm_vcpu *vcpu)
{
if (!test_kvm_facility(vcpu->kvm, 76))
/*
* If the AP instructions are not being interpreted and the MSAX3
* facility is not configured for the guest, there is nothing to set up.
*/
if (!vcpu->kvm->arch.crypto.apie && !test_kvm_facility(vcpu->kvm, 76))
return;
vcpu->arch.sie_block->crycbd = vcpu->kvm->arch.crypto.crycbd;
vcpu->arch.sie_block->ecb3 &= ~(ECB3_AES | ECB3_DEA);
vcpu->arch.sie_block->eca &= ~ECA_APIE;
if (vcpu->kvm->arch.crypto.apie)
vcpu->arch.sie_block->eca |= ECA_APIE;
/* Set up protected key support */
if (vcpu->kvm->arch.crypto.aes_kw)
vcpu->arch.sie_block->ecb3 |= ECB3_AES;
if (vcpu->kvm->arch.crypto.dea_kw)
vcpu->arch.sie_block->ecb3 |= ECB3_DEA;
vcpu->arch.sie_block->crycbd = vcpu->kvm->arch.crypto.crycbd;
}
void kvm_s390_vcpu_unsetup_cmma(struct kvm_vcpu *vcpu)
......@@ -2685,6 +2725,8 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu)
hrtimer_init(&vcpu->arch.ckc_timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
vcpu->arch.ckc_timer.function = kvm_s390_idle_wakeup;
vcpu->arch.sie_block->hpid = HPID_KVM;
kvm_s390_vcpu_crypto_setup(vcpu);
return rc;
......@@ -2768,18 +2810,25 @@ static void kvm_s390_vcpu_request(struct kvm_vcpu *vcpu)
exit_sie(vcpu);
}
bool kvm_s390_vcpu_sie_inhibited(struct kvm_vcpu *vcpu)
{
return atomic_read(&vcpu->arch.sie_block->prog20) &
(PROG_BLOCK_SIE | PROG_REQUEST);
}
static void kvm_s390_vcpu_request_handled(struct kvm_vcpu *vcpu)
{
atomic_andnot(PROG_REQUEST, &vcpu->arch.sie_block->prog20);
}
/*
* Kick a guest cpu out of SIE and wait until SIE is not running.
* Kick a guest cpu out of (v)SIE and wait until (v)SIE is not running.
* If the CPU is not running (e.g. waiting as idle) the function will
* return immediately. */
void exit_sie(struct kvm_vcpu *vcpu)
{
kvm_s390_set_cpuflags(vcpu, CPUSTAT_STOP_INT);
kvm_s390_vsie_kick(vcpu);
while (vcpu->arch.sie_block->prog0c & PROG_IN_SIE)
cpu_relax();
}
......@@ -3196,6 +3245,8 @@ static int kvm_s390_handle_requests(struct kvm_vcpu *vcpu)
/* nothing to do, just clear the request */
kvm_clear_request(KVM_REQ_UNHALT, vcpu);
/* we left the vsie handler, nothing to do, just clear the request */
kvm_clear_request(KVM_REQ_VSIE_RESTART, vcpu);
return 0;
}
......
arch/s390/kvm/kvm-s390.h
View file @ dd5bd0a6
......@@ -290,6 +290,7 @@ void kvm_s390_vcpu_start(struct kvm_vcpu *vcpu);
void kvm_s390_vcpu_stop(struct kvm_vcpu *vcpu);
void kvm_s390_vcpu_block(struct kvm_vcpu *vcpu);
void kvm_s390_vcpu_unblock(struct kvm_vcpu *vcpu);
bool kvm_s390_vcpu_sie_inhibited(struct kvm_vcpu *vcpu);
void exit_sie(struct kvm_vcpu *vcpu);
void kvm_s390_sync_request(int req, struct kvm_vcpu *vcpu);
int kvm_s390_vcpu_setup_cmma(struct kvm_vcpu *vcpu);
......
arch/s390/kvm/vsie.c
View file @ dd5bd0a6
......@@ -135,14 +135,148 @@ static int prepare_cpuflags(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
atomic_set(&scb_s->cpuflags, newflags);
return 0;
}
/* Copy to APCB FORMAT1 from APCB FORMAT0 */
static int setup_apcb10(struct kvm_vcpu *vcpu, struct kvm_s390_apcb1 *apcb_s,
unsigned long apcb_o, struct kvm_s390_apcb1 *apcb_h)
{
struct kvm_s390_apcb0 tmp;
/*
if (read_guest_real(vcpu, apcb_o, &tmp, sizeof(struct kvm_s390_apcb0)))
return -EFAULT;
apcb_s->apm[0] = apcb_h->apm[0] & tmp.apm[0];
apcb_s->aqm[0] = apcb_h->aqm[0] & tmp.aqm[0] & 0xffff000000000000UL;
apcb_s->adm[0] = apcb_h->adm[0] & tmp.adm[0] & 0xffff000000000000UL;
return 0;
}
/**
* setup_apcb00 - Copy to APCB FORMAT0 from APCB FORMAT0
* @vcpu: pointer to the virtual CPU
* @apcb_s: pointer to start of apcb in the shadow crycb
* @apcb_o: pointer to start of original apcb in the guest2
* @apcb_h: pointer to start of apcb in the guest1
*
* Returns 0 and -EFAULT on error reading guest apcb
*/
static int setup_apcb00(struct kvm_vcpu *vcpu, unsigned long *apcb_s,
unsigned long apcb_o, unsigned long *apcb_h)
{
if (read_guest_real(vcpu, apcb_o, apcb_s,
sizeof(struct kvm_s390_apcb0)))
return -EFAULT;
bitmap_and(apcb_s, apcb_s, apcb_h, sizeof(struct kvm_s390_apcb0));
return 0;
}
/**
* setup_apcb11 - Copy the FORMAT1 APCB from the guest to the shadow CRYCB
* @vcpu: pointer to the virtual CPU
* @apcb_s: pointer to start of apcb in the shadow crycb
* @apcb_o: pointer to start of original guest apcb
* @apcb_h: pointer to start of apcb in the host
*
* Returns 0 and -EFAULT on error reading guest apcb
*/
static int setup_apcb11(struct kvm_vcpu *vcpu, unsigned long *apcb_s,
unsigned long apcb_o,
unsigned long *apcb_h)
{
if (read_guest_real(vcpu, apcb_o, apcb_s,
sizeof(struct kvm_s390_apcb1)))
return -EFAULT;
bitmap_and(apcb_s, apcb_s, apcb_h, sizeof(struct kvm_s390_apcb1));
return 0;
}
/**
* setup_apcb - Create a shadow copy of the apcb.
* @vcpu: pointer to the virtual CPU
* @crycb_s: pointer to shadow crycb
* @crycb_o: pointer to original guest crycb
* @crycb_h: pointer to the host crycb
* @fmt_o: format of the original guest crycb.
* @fmt_h: format of the host crycb.
*
* Checks the compatibility between the guest and host crycb and calls the
* appropriate copy function.
*
* Return 0 or an error number if the guest and host crycb are incompatible.
*/
static int setup_apcb(struct kvm_vcpu *vcpu, struct kvm_s390_crypto_cb *crycb_s,
const u32 crycb_o,
struct kvm_s390_crypto_cb *crycb_h,
int fmt_o, int fmt_h)
{
struct kvm_s390_crypto_cb *crycb;
crycb = (struct kvm_s390_crypto_cb *) (unsigned long)crycb_o;
switch (fmt_o) {
case CRYCB_FORMAT2:
if ((crycb_o & PAGE_MASK) != ((crycb_o + 256) & PAGE_MASK))
return -EACCES;
if (fmt_h != CRYCB_FORMAT2)
return -EINVAL;
return setup_apcb11(vcpu, (unsigned long *)&crycb_s->apcb1,
(unsigned long) &crycb->apcb1,
(unsigned long *)&crycb_h->apcb1);
case CRYCB_FORMAT1:
switch (fmt_h) {
case CRYCB_FORMAT2:
return setup_apcb10(vcpu, &crycb_s->apcb1,
(unsigned long) &crycb->apcb0,
&crycb_h->apcb1);
case CRYCB_FORMAT1:
return setup_apcb00(vcpu,
(unsigned long *) &crycb_s->apcb0,
(unsigned long) &crycb->apcb0,
(unsigned long *) &crycb_h->apcb0);
}
break;
case CRYCB_FORMAT0:
if ((crycb_o & PAGE_MASK) != ((crycb_o + 32) & PAGE_MASK))
return -EACCES;
switch (fmt_h) {
case CRYCB_FORMAT2:
return setup_apcb10(vcpu, &crycb_s->apcb1,
(unsigned long) &crycb->apcb0,
&crycb_h->apcb1);
case CRYCB_FORMAT1:
case CRYCB_FORMAT0:
return setup_apcb00(vcpu,
(unsigned long *) &crycb_s->apcb0,
(unsigned long) &crycb->apcb0,
(unsigned long *) &crycb_h->apcb0);
}
}
return -EINVAL;
}
/**
* shadow_crycb - Create a shadow copy of the crycb block
* @vcpu: a pointer to the virtual CPU
* @vsie_page: a pointer to internal date used for the vSIE
*
* Create a shadow copy of the crycb block and setup key wrapping, if
* requested for guest 3 and enabled for guest 2.
*
* We only accept format-1 (no AP in g2), but convert it into format-2
* We accept format-1 or format-2, but we convert format-1 into format-2
* in the shadow CRYCB.
* Using format-2 enables the firmware to choose the right format when
* scheduling the SIE.
* There is nothing to do for format-0.
*
* This function centralize the issuing of set_validity_icpt() for all
* the subfunctions working on the crycb.
*
* Returns: - 0 if shadowed or nothing to do
* - > 0 if control has to be given to guest 2
*/
......@@ -154,23 +288,40 @@ static int shadow_crycb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
const u32 crycb_addr = crycbd_o & 0x7ffffff8U;
unsigned long *b1, *b2;
u8 ecb3_flags;
int apie_h;
int key_msk = test_kvm_facility(vcpu->kvm, 76);
int fmt_o = crycbd_o & CRYCB_FORMAT_MASK;
int fmt_h = vcpu->arch.sie_block->crycbd & CRYCB_FORMAT_MASK;
int ret = 0;
scb_s->crycbd = 0;
if (!(crycbd_o & vcpu->arch.sie_block->crycbd & CRYCB_FORMAT1))
return 0;
/* format-1 is supported with message-security-assist extension 3 */
if (!test_kvm_facility(vcpu->kvm, 76))
apie_h = vcpu->arch.sie_block->eca & ECA_APIE;
if (!apie_h && !key_msk)
return 0;
if (!crycb_addr)
return set_validity_icpt(scb_s, 0x0039U);
if (fmt_o == CRYCB_FORMAT1)
if ((crycb_addr & PAGE_MASK) !=
((crycb_addr + 128) & PAGE_MASK))
return set_validity_icpt(scb_s, 0x003CU);
if (apie_h && (scb_o->eca & ECA_APIE)) {
ret = setup_apcb(vcpu, &vsie_page->crycb, crycb_addr,
vcpu->kvm->arch.crypto.crycb,
fmt_o, fmt_h);
if (ret)
goto end;
scb_s->eca |= scb_o->eca & ECA_APIE;
}
/* we may only allow it if enabled for guest 2 */
ecb3_flags = scb_o->ecb3 & vcpu->arch.sie_block->ecb3 &
(ECB3_AES | ECB3_DEA);
if (!ecb3_flags)
return 0;
if ((crycb_addr & PAGE_MASK) != ((crycb_addr + 128) & PAGE_MASK))
return set_validity_icpt(scb_s, 0x003CU);
else if (!crycb_addr)
return set_validity_icpt(scb_s, 0x0039U);
goto end;
/* copy only the wrapping keys */
if (read_guest_real(vcpu, crycb_addr + 72,
......@@ -178,8 +329,6 @@ static int shadow_crycb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
return set_validity_icpt(scb_s, 0x0035U);
scb_s->ecb3 |= ecb3_flags;
scb_s->crycbd = ((__u32)(__u64) &vsie_page->crycb) | CRYCB_FORMAT1 |
CRYCB_FORMAT2;
/* xor both blocks in one run */
b1 = (unsigned long *) vsie_page->crycb.dea_wrapping_key_mask;
......@@ -187,6 +336,16 @@ static int shadow_crycb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
vcpu->kvm->arch.crypto.crycb->dea_wrapping_key_mask;
/* as 56%8 == 0, bitmap_xor won't overwrite any data */
bitmap_xor(b1, b1, b2, BITS_PER_BYTE * 56);
end:
switch (ret) {
case -EINVAL:
return set_validity_icpt(scb_s, 0x0020U);
case -EFAULT:
return set_validity_icpt(scb_s, 0x0035U);
case -EACCES:
return set_validity_icpt(scb_s, 0x003CU);
}
scb_s->crycbd = ((__u32)(__u64) &vsie_page->crycb) | CRYCB_FORMAT2;
return 0;
}
......@@ -383,6 +542,8 @@ static int shadow_scb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
if (test_kvm_facility(vcpu->kvm, 156))
scb_s->ecd |= scb_o->ecd & ECD_ETOKENF;
scb_s->hpid = HPID_VSIE;
prepare_ibc(vcpu, vsie_page);
rc = shadow_crycb(vcpu, vsie_page);
out:
......@@ -830,7 +991,7 @@ static int do_vsie_run(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
struct kvm_s390_sie_block *scb_s = &vsie_page->scb_s;
struct kvm_s390_sie_block *scb_o = vsie_page->scb_o;
int guest_bp_isolation;
int rc;
int rc = 0;
handle_last_fault(vcpu, vsie_page);
......@@ -858,7 +1019,18 @@ static int do_vsie_run(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
guest_enter_irqoff();
local_irq_enable();
rc = sie64a(scb_s, vcpu->run->s.regs.gprs);
/*
* Simulate a SIE entry of the VCPU (see sie64a), so VCPU blocking
* and VCPU requests also hinder the vSIE from running and lead
* to an immediate exit. kvm_s390_vsie_kick() has to be used to
* also kick the vSIE.
*/
vcpu->arch.sie_block->prog0c |= PROG_IN_SIE;
barrier();
if (!kvm_s390_vcpu_sie_inhibited(vcpu))
rc = sie64a(scb_s, vcpu->run->s.regs.gprs);
barrier();
vcpu->arch.sie_block->prog0c &= ~PROG_IN_SIE;
local_irq_disable();
guest_exit_irqoff();
......@@ -1005,7 +1177,8 @@ static int vsie_run(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
if (rc == -EAGAIN)
rc = 0;
if (rc || scb_s->icptcode || signal_pending(current) ||
kvm_s390_vcpu_has_irq(vcpu, 0))
kvm_s390_vcpu_has_irq(vcpu, 0) ||
kvm_s390_vcpu_sie_inhibited(vcpu))
break;
}
......@@ -1122,7 +1295,8 @@ int kvm_s390_handle_vsie(struct kvm_vcpu *vcpu)
if (unlikely(scb_addr & 0x1ffUL))
return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
if (signal_pending(current) || kvm_s390_vcpu_has_irq(vcpu, 0))
if (signal_pending(current) || kvm_s390_vcpu_has_irq(vcpu, 0) ||
kvm_s390_vcpu_sie_inhibited(vcpu))
return 0;
vsie_page = get_vsie_page(vcpu->kvm, scb_addr);
......
arch/s390/mm/gmap.c
View file @ dd5bd0a6
......@@ -907,10 +907,16 @@ static inline pmd_t *gmap_pmd_op_walk(struct gmap *gmap, unsigned long gaddr)
pmd_t *pmdp;
BUG_ON(gmap_is_shadow(gmap));
spin_lock(&gmap->guest_table_lock);
pmdp = (pmd_t *) gmap_table_walk(gmap, gaddr, 1);
if (!pmdp)
return NULL;
if (!pmdp || pmd_none(*pmdp)) {
/* without huge pages, there is no need to take the table lock */
if (!gmap->mm->context.allow_gmap_hpage_1m)
return pmd_none(*pmdp) ? NULL : pmdp;
spin_lock(&gmap->guest_table_lock);
if (pmd_none(*pmdp)) {
spin_unlock(&gmap->guest_table_lock);
return NULL;
}
......
arch/s390/tools/gen_facilities.c
View file @ dd5bd0a6
......@@ -106,6 +106,8 @@ static struct facility_def facility_defs[] = {
.name = "FACILITIES_KVM_CPUMODEL",
.bits = (int[]){
12, /* AP Query Configuration Information */
15, /* AP Facilities Test */
156, /* etoken facility */
-1 /* END */
}
......
drivers/iommu/Kconfig
View file @ dd5bd0a6
......@@ -372,6 +372,14 @@ config S390_CCW_IOMMU
Enables bits of IOMMU API required by VFIO. The iommu_ops
is not implemented as it is not necessary for VFIO.
config S390_AP_IOMMU
bool "S390 AP IOMMU Support"
depends on S390 && ZCRYPT
select IOMMU_API
help
Enables bits of IOMMU API required by VFIO. The iommu_ops
is not implemented as it is not necessary for VFIO.
config MTK_IOMMU
bool "MTK IOMMU Support"
depends on ARM || ARM64
......
drivers/s390/crypto/Makefile
View file @ dd5bd0a6
......@@ -15,3 +15,7 @@ obj-$(CONFIG_ZCRYPT) += zcrypt_pcixcc.o zcrypt_cex2a.o zcrypt_cex4.o
# pkey kernel module
pkey-objs := pkey_api.o
obj-$(CONFIG_PKEY) += pkey.o
# adjunct processor matrix
vfio_ap-objs := vfio_ap_drv.o vfio_ap_ops.o
obj-$(CONFIG_VFIO_AP) += vfio_ap.o
drivers/s390/crypto/vfio_ap_drv.c 0 → 100644
View file @ dd5bd0a6
// SPDX-License-Identifier: GPL-2.0+
/*
* VFIO based AP device driver
*
* Copyright IBM Corp. 2018
*
* Author(s): Tony Krowiak <akrowiak@linux.ibm.com>
*/
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/slab.h>
#include <linux/string.h>
#include "vfio_ap_private.h"
#define VFIO_AP_ROOT_NAME "vfio_ap"
#define VFIO_AP_DEV_TYPE_NAME "ap_matrix"
#define VFIO_AP_DEV_NAME "matrix"
MODULE_AUTHOR("IBM Corporation");
MODULE_DESCRIPTION("VFIO AP device driver, Copyright IBM Corp. 2018");
MODULE_LICENSE("GPL v2");
static struct ap_driver vfio_ap_drv;
static struct device_type vfio_ap_dev_type = {
.name = VFIO_AP_DEV_TYPE_NAME,
};
struct ap_matrix_dev *matrix_dev;
/* Only type 10 adapters (CEX4 and later) are supported
* by the AP matrix device driver
*/
static struct ap_device_id ap_queue_ids[] = {
{ .dev_type = AP_DEVICE_TYPE_CEX4,
.match_flags = AP_DEVICE_ID_MATCH_QUEUE_TYPE },
{ .dev_type = AP_DEVICE_TYPE_CEX5,
.match_flags = AP_DEVICE_ID_MATCH_QUEUE_TYPE },
{ .dev_type = AP_DEVICE_TYPE_CEX6,
.match_flags = AP_DEVICE_ID_MATCH_QUEUE_TYPE },
{ /* end of sibling */ },
};
MODULE_DEVICE_TABLE(vfio_ap, ap_queue_ids);
static int vfio_ap_queue_dev_probe(struct ap_device *apdev)
{
return 0;
}
static void vfio_ap_queue_dev_remove(struct ap_device *apdev)
{
/* Nothing to do yet */
}
static void vfio_ap_matrix_dev_release(struct device *dev)
{
struct ap_matrix_dev *matrix_dev = dev_get_drvdata(dev);
kfree(matrix_dev);
}
static int vfio_ap_matrix_dev_create(void)
{
int ret;
struct device *root_device;
root_device = root_device_register(VFIO_AP_ROOT_NAME);
if (IS_ERR(root_device))
return PTR_ERR(root_device);
matrix_dev = kzalloc(sizeof(*matrix_dev), GFP_KERNEL);
if (!matrix_dev) {
ret = -ENOMEM;
goto matrix_alloc_err;
}
/* Fill in config info via PQAP(QCI), if available */
if (test_facility(12)) {
ret = ap_qci(&matrix_dev->info);
if (ret)
goto matrix_alloc_err;
}
mutex_init(&matrix_dev->lock);
INIT_LIST_HEAD(&matrix_dev->mdev_list);
matrix_dev->device.type = &vfio_ap_dev_type;
dev_set_name(&matrix_dev->device, "%s", VFIO_AP_DEV_NAME);
matrix_dev->device.parent = root_device;
matrix_dev->device.release = vfio_ap_matrix_dev_release;
matrix_dev->device.driver = &vfio_ap_drv.driver;
ret = device_register(&matrix_dev->device);
if (ret)
goto matrix_reg_err;
return 0;
matrix_reg_err:
put_device(&matrix_dev->device);
matrix_alloc_err:
root_device_unregister(root_device);
return ret;
}
static void vfio_ap_matrix_dev_destroy(void)
{
device_unregister(&matrix_dev->device);
root_device_unregister(matrix_dev->device.parent);
}
int __init vfio_ap_init(void)
{
int ret;
/* If there are no AP instructions, there is nothing to pass through. */
if (!ap_instructions_available())
return -ENODEV;
ret = vfio_ap_matrix_dev_create();
if (ret)
return ret;
memset(&vfio_ap_drv, 0, sizeof(vfio_ap_drv));
vfio_ap_drv.probe = vfio_ap_queue_dev_probe;
vfio_ap_drv.remove = vfio_ap_queue_dev_remove;
vfio_ap_drv.ids = ap_queue_ids;
ret = ap_driver_register(&vfio_ap_drv, THIS_MODULE, VFIO_AP_DRV_NAME);
if (ret) {
vfio_ap_matrix_dev_destroy();
return ret;
}
ret = vfio_ap_mdev_register();
if (ret) {
ap_driver_unregister(&vfio_ap_drv);
vfio_ap_matrix_dev_destroy();
return ret;
}
return 0;
}
void __exit vfio_ap_exit(void)
{
vfio_ap_mdev_unregister();
ap_driver_unregister(&vfio_ap_drv);
vfio_ap_matrix_dev_destroy();
}
module_init(vfio_ap_init);
module_exit(vfio_ap_exit);
drivers/s390/crypto/vfio_ap_ops.c 0 → 100644
View file @ dd5bd0a6
// SPDX-License-Identifier: GPL-2.0+
/*
* Adjunct processor matrix VFIO device driver callbacks.
*
* Copyright IBM Corp. 2018
*
* Author(s): Tony Krowiak <akrowiak@linux.ibm.com>
* Halil Pasic <pasic@linux.ibm.com>
* Pierre Morel <pmorel@linux.ibm.com>
*/
#include <linux/string.h>
#include <linux/vfio.h>
#include <linux/device.h>
#include <linux/list.h>
#include <linux/ctype.h>
#include <linux/bitops.h>
#include <linux/kvm_host.h>
#include <linux/module.h>
#include <asm/kvm.h>
#include <asm/zcrypt.h>
#include "vfio_ap_private.h"
#define VFIO_AP_MDEV_TYPE_HWVIRT "passthrough"
#define VFIO_AP_MDEV_NAME_HWVIRT "VFIO AP Passthrough Device"
static void vfio_ap_matrix_init(struct ap_config_info *info,
struct ap_matrix *matrix)
{
matrix->apm_max = info->apxa ? info->Na : 63;
matrix->aqm_max = info->apxa ? info->Nd : 15;
matrix->adm_max = info->apxa ? info->Nd : 15;
}
static int vfio_ap_mdev_create(struct kobject *kobj, struct mdev_device *mdev)
{
struct ap_matrix_mdev *matrix_mdev;
if ((atomic_dec_if_positive(&matrix_dev->available_instances) < 0))
return -EPERM;
matrix_mdev = kzalloc(sizeof(*matrix_mdev), GFP_KERNEL);
if (!matrix_mdev) {
atomic_inc(&matrix_dev->available_instances);
return -ENOMEM;
}
vfio_ap_matrix_init(&matrix_dev->info, &matrix_mdev->matrix);
mdev_set_drvdata(mdev, matrix_mdev);
mutex_lock(&matrix_dev->lock);
list_add(&matrix_mdev->node, &matrix_dev->mdev_list);
mutex_unlock(&matrix_dev->lock);
return 0;
}
static int vfio_ap_mdev_remove(struct mdev_device *mdev)
{
struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
if (matrix_mdev->kvm)
return -EBUSY;
mutex_lock(&matrix_dev->lock);
list_del(&matrix_mdev->node);
mutex_unlock(&matrix_dev->lock);
kfree(matrix_mdev);
mdev_set_drvdata(mdev, NULL);
atomic_inc(&matrix_dev->available_instances);
return 0;
}
static ssize_t name_show(struct kobject *kobj, struct device *dev, char *buf)
{
return sprintf(buf, "%s\n", VFIO_AP_MDEV_NAME_HWVIRT);
}
MDEV_TYPE_ATTR_RO(name);
static ssize_t available_instances_show(struct kobject *kobj,
struct device *dev, char *buf)
{
return sprintf(buf, "%d\n",
atomic_read(&matrix_dev->available_instances));
}
MDEV_TYPE_ATTR_RO(available_instances);
static ssize_t device_api_show(struct kobject *kobj, struct device *dev,
char *buf)
{
return sprintf(buf, "%s\n", VFIO_DEVICE_API_AP_STRING);
}
MDEV_TYPE_ATTR_RO(device_api);
static struct attribute *vfio_ap_mdev_type_attrs[] = {
&mdev_type_attr_name.attr,
&mdev_type_attr_device_api.attr,
&mdev_type_attr_available_instances.attr,
NULL,
};
static struct attribute_group vfio_ap_mdev_hwvirt_type_group = {
.name = VFIO_AP_MDEV_TYPE_HWVIRT,
.attrs = vfio_ap_mdev_type_attrs,
};
static struct attribute_group *vfio_ap_mdev_type_groups[] = {
&vfio_ap_mdev_hwvirt_type_group,
NULL,
};
struct vfio_ap_queue_reserved {
unsigned long *apid;
unsigned long *apqi;
bool reserved;
};
/**
* vfio_ap_has_queue
*
* @dev: an AP queue device
* @data: a struct vfio_ap_queue_reserved reference
*
* Flags whether the AP queue device (@dev) has a queue ID containing the APQN,
* apid or apqi specified in @data:
*
* - If @data contains both an apid and apqi value, then @data will be flagged
* as reserved if the APID and APQI fields for the AP queue device matches
*
* - If @data contains only an apid value, @data will be flagged as
* reserved if the APID field in the AP queue device matches
*
* - If @data contains only an apqi value, @data will be flagged as
* reserved if the APQI field in the AP queue device matches
*
* Returns 0 to indicate the input to function succeeded. Returns -EINVAL if
* @data does not contain either an apid or apqi.
*/
static int vfio_ap_has_queue(struct device *dev, void *data)
{
struct vfio_ap_queue_reserved *qres = data;
struct ap_queue *ap_queue = to_ap_queue(dev);
ap_qid_t qid;
unsigned long id;
if (qres->apid && qres->apqi) {
qid = AP_MKQID(*qres->apid, *qres->apqi);
if (qid == ap_queue->qid)
qres->reserved = true;
} else if (qres->apid && !qres->apqi) {
id = AP_QID_CARD(ap_queue->qid);
if (id == *qres->apid)
qres->reserved = true;
} else if (!qres->apid && qres->apqi) {
id = AP_QID_QUEUE(ap_queue->qid);
if (id == *qres->apqi)
qres->reserved = true;
} else {
return -EINVAL;
}
return 0;
}
/**
* vfio_ap_verify_queue_reserved
*
* @matrix_dev: a mediated matrix device
* @apid: an AP adapter ID
* @apqi: an AP queue index
*
* Verifies that the AP queue with @apid/@apqi is reserved by the VFIO AP device
* driver according to the following rules:
*
* - If both @apid and @apqi are not NULL, then there must be an AP queue
* device bound to the vfio_ap driver with the APQN identified by @apid and
* @apqi
*
* - If only @apid is not NULL, then there must be an AP queue device bound
* to the vfio_ap driver with an APQN containing @apid
*
* - If only @apqi is not NULL, then there must be an AP queue device bound
* to the vfio_ap driver with an APQN containing @apqi
*
* Returns 0 if the AP queue is reserved; otherwise, returns -EADDRNOTAVAIL.
*/
static int vfio_ap_verify_queue_reserved(unsigned long *apid,
unsigned long *apqi)
{
int ret;
struct vfio_ap_queue_reserved qres;
qres.apid = apid;
qres.apqi = apqi;
qres.reserved = false;
ret = driver_for_each_device(matrix_dev->device.driver, NULL, &qres,
vfio_ap_has_queue);
if (ret)
return ret;
if (qres.reserved)
return 0;
return -EADDRNOTAVAIL;
}
static int
vfio_ap_mdev_verify_queues_reserved_for_apid(struct ap_matrix_mdev *matrix_mdev,
unsigned long apid)
{
int ret;
unsigned long apqi;
unsigned long nbits = matrix_mdev->matrix.aqm_max + 1;
if (find_first_bit_inv(matrix_mdev->matrix.aqm, nbits) >= nbits)
return vfio_ap_verify_queue_reserved(&apid, NULL);
for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm, nbits) {
ret = vfio_ap_verify_queue_reserved(&apid, &apqi);
if (ret)
return ret;
}
return 0;
}
/**
* vfio_ap_mdev_verify_no_sharing
*
* Verifies that the APQNs derived from the cross product of the AP adapter IDs
* and AP queue indexes comprising the AP matrix are not configured for another
* mediated device. AP queue sharing is not allowed.
*
* @matrix_mdev: the mediated matrix device
*
* Returns 0 if the APQNs are not shared, otherwise; returns -EADDRINUSE.
*/
static int vfio_ap_mdev_verify_no_sharing(struct ap_matrix_mdev *matrix_mdev)
{
struct ap_matrix_mdev *lstdev;
DECLARE_BITMAP(apm, AP_DEVICES);
DECLARE_BITMAP(aqm, AP_DOMAINS);
list_for_each_entry(lstdev, &matrix_dev->mdev_list, node) {
if (matrix_mdev == lstdev)
continue;
memset(apm, 0, sizeof(apm));
memset(aqm, 0, sizeof(aqm));
/*
* We work on full longs, as we can only exclude the leftover
* bits in non-inverse order. The leftover is all zeros.
*/
if (!bitmap_and(apm, matrix_mdev->matrix.apm,
lstdev->matrix.apm, AP_DEVICES))
continue;
if (!bitmap_and(aqm, matrix_mdev->matrix.aqm,
lstdev->matrix.aqm, AP_DOMAINS))
continue;
return -EADDRINUSE;
}
return 0;
}
/**
* assign_adapter_store
*
* @dev: the matrix device
* @attr: the mediated matrix device's assign_adapter attribute
* @buf: a buffer containing the AP adapter number (APID) to
* be assigned
* @count: the number of bytes in @buf
*
* Parses the APID from @buf and sets the corresponding bit in the mediated
* matrix device's APM.
*
* Returns the number of bytes processed if the APID is valid; otherwise,
* returns one of the following errors:
*
* 1. -EINVAL
* The APID is not a valid number
*
* 2. -ENODEV
* The APID exceeds the maximum value configured for the system
*
* 3. -EADDRNOTAVAIL
* An APQN derived from the cross product of the APID being assigned
* and the APQIs previously assigned is not bound to the vfio_ap device
* driver; or, if no APQIs have yet been assigned, the APID is not
* contained in an APQN bound to the vfio_ap device driver.
*
* 4. -EADDRINUSE
* An APQN derived from the cross product of the APID being assigned
* and the APQIs previously assigned is being used by another mediated
* matrix device
*/
static ssize_t assign_adapter_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
unsigned long apid;
struct mdev_device *mdev = mdev_from_dev(dev);
struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
/* If the guest is running, disallow assignment of adapter */
if (matrix_mdev->kvm)
return -EBUSY;
ret = kstrtoul(buf, 0, &apid);
if (ret)
return ret;
if (apid > matrix_mdev->matrix.apm_max)
return -ENODEV;
/*
* Set the bit in the AP mask (APM) corresponding to the AP adapter
* number (APID). The bits in the mask, from most significant to least
* significant bit, correspond to APIDs 0-255.
*/
mutex_lock(&matrix_dev->lock);
ret = vfio_ap_mdev_verify_queues_reserved_for_apid(matrix_mdev, apid);
if (ret)
goto done;
set_bit_inv(apid, matrix_mdev->matrix.apm);
ret = vfio_ap_mdev_verify_no_sharing(matrix_mdev);
if (ret)
goto share_err;
ret = count;
goto done;
share_err:
clear_bit_inv(apid, matrix_mdev->matrix.apm);
done:
mutex_unlock(&matrix_dev->lock);
return ret;
}
static DEVICE_ATTR_WO(assign_adapter);
/**
* unassign_adapter_store
*
* @dev: the matrix device
* @attr: the mediated matrix device's unassign_adapter attribute
* @buf: a buffer containing the adapter number (APID) to be unassigned
* @count: the number of bytes in @buf
*
* Parses the APID from @buf and clears the corresponding bit in the mediated
* matrix device's APM.
*
* Returns the number of bytes processed if the APID is valid; otherwise,
* returns one of the following errors:
* -EINVAL if the APID is not a number
* -ENODEV if the APID it exceeds the maximum value configured for the
* system
*/
static ssize_t unassign_adapter_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
unsigned long apid;
struct mdev_device *mdev = mdev_from_dev(dev);
struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
/* If the guest is running, disallow un-assignment of adapter */
if (matrix_mdev->kvm)
return -EBUSY;
ret = kstrtoul(buf, 0, &apid);
if (ret)
return ret;
if (apid > matrix_mdev->matrix.apm_max)
return -ENODEV;
mutex_lock(&matrix_dev->lock);
clear_bit_inv((unsigned long)apid, matrix_mdev->matrix.apm);
mutex_unlock(&matrix_dev->lock);
return count;
}
DEVICE_ATTR_WO(unassign_adapter);
static int
vfio_ap_mdev_verify_queues_reserved_for_apqi(struct ap_matrix_mdev *matrix_mdev,
unsigned long apqi)
{
int ret;
unsigned long apid;
unsigned long nbits = matrix_mdev->matrix.apm_max + 1;
if (find_first_bit_inv(matrix_mdev->matrix.apm, nbits) >= nbits)
return vfio_ap_verify_queue_reserved(NULL, &apqi);
for_each_set_bit_inv(apid, matrix_mdev->matrix.apm, nbits) {
ret = vfio_ap_verify_queue_reserved(&apid, &apqi);
if (ret)
return ret;
}
return 0;
}
/**
* assign_domain_store
*
* @dev: the matrix device
* @attr: the mediated matrix device's assign_domain attribute
* @buf: a buffer containing the AP queue index (APQI) of the domain to
* be assigned
* @count: the number of bytes in @buf
*
* Parses the APQI from @buf and sets the corresponding bit in the mediated
* matrix device's AQM.
*
* Returns the number of bytes processed if the APQI is valid; otherwise returns
* one of the following errors:
*
* 1. -EINVAL
* The APQI is not a valid number
*
* 2. -ENODEV
* The APQI exceeds the maximum value configured for the system
*
* 3. -EADDRNOTAVAIL
* An APQN derived from the cross product of the APQI being assigned
* and the APIDs previously assigned is not bound to the vfio_ap device
* driver; or, if no APIDs have yet been assigned, the APQI is not
* contained in an APQN bound to the vfio_ap device driver.
*
* 4. -EADDRINUSE
* An APQN derived from the cross product of the APQI being assigned
* and the APIDs previously assigned is being used by another mediated
* matrix device
*/
static ssize_t assign_domain_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
unsigned long apqi;
struct mdev_device *mdev = mdev_from_dev(dev);
struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
unsigned long max_apqi = matrix_mdev->matrix.aqm_max;
/* If the guest is running, disallow assignment of domain */
if (matrix_mdev->kvm)
return -EBUSY;
ret = kstrtoul(buf, 0, &apqi);
if (ret)
return ret;
if (apqi > max_apqi)
return -ENODEV;
mutex_lock(&matrix_dev->lock);
ret = vfio_ap_mdev_verify_queues_reserved_for_apqi(matrix_mdev, apqi);
if (ret)
goto done;
set_bit_inv(apqi, matrix_mdev->matrix.aqm);
ret = vfio_ap_mdev_verify_no_sharing(matrix_mdev);
if (ret)
goto share_err;
ret = count;
goto done;
share_err:
clear_bit_inv(apqi, matrix_mdev->matrix.aqm);
done:
mutex_unlock(&matrix_dev->lock);
return ret;
}
DEVICE_ATTR_WO(assign_domain);
/**
* unassign_domain_store
*
* @dev: the matrix device
* @attr: the mediated matrix device's unassign_domain attribute
* @buf: a buffer containing the AP queue index (APQI) of the domain to
* be unassigned
* @count: the number of bytes in @buf
*
* Parses the APQI from @buf and clears the corresponding bit in the
* mediated matrix device's AQM.
*
* Returns the number of bytes processed if the APQI is valid; otherwise,
* returns one of the following errors:
* -EINVAL if the APQI is not a number
* -ENODEV if the APQI exceeds the maximum value configured for the system
*/
static ssize_t unassign_domain_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
unsigned long apqi;
struct mdev_device *mdev = mdev_from_dev(dev);
struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
/* If the guest is running, disallow un-assignment of domain */
if (matrix_mdev->kvm)
return -EBUSY;
ret = kstrtoul(buf, 0, &apqi);
if (ret)
return ret;
if (apqi > matrix_mdev->matrix.aqm_max)
return -ENODEV;
mutex_lock(&matrix_dev->lock);
clear_bit_inv((unsigned long)apqi, matrix_mdev->matrix.aqm);
mutex_unlock(&matrix_dev->lock);
return count;
}
DEVICE_ATTR_WO(unassign_domain);
/**
* assign_control_domain_store
*
* @dev: the matrix device
* @attr: the mediated matrix device's assign_control_domain attribute
* @buf: a buffer containing the domain ID to be assigned
* @count: the number of bytes in @buf
*
* Parses the domain ID from @buf and sets the corresponding bit in the mediated
* matrix device's ADM.
*
* Returns the number of bytes processed if the domain ID is valid; otherwise,
* returns one of the following errors:
* -EINVAL if the ID is not a number
* -ENODEV if the ID exceeds the maximum value configured for the system
*/
static ssize_t assign_control_domain_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
unsigned long id;
struct mdev_device *mdev = mdev_from_dev(dev);
struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
/* If the guest is running, disallow assignment of control domain */
if (matrix_mdev->kvm)
return -EBUSY;
ret = kstrtoul(buf, 0, &id);
if (ret)
return ret;
if (id > matrix_mdev->matrix.adm_max)
return -ENODEV;
/* Set the bit in the ADM (bitmask) corresponding to the AP control
* domain number (id). The bits in the mask, from most significant to
* least significant, correspond to IDs 0 up to the one less than the
* number of control domains that can be assigned.
*/
mutex_lock(&matrix_dev->lock);
set_bit_inv(id, matrix_mdev->matrix.adm);
mutex_unlock(&matrix_dev->lock);
return count;
}
DEVICE_ATTR_WO(assign_control_domain);
/**
* unassign_control_domain_store
*
* @dev: the matrix device
* @attr: the mediated matrix device's unassign_control_domain attribute
* @buf: a buffer containing the domain ID to be unassigned
* @count: the number of bytes in @buf
*
* Parses the domain ID from @buf and clears the corresponding bit in the
* mediated matrix device's ADM.
*
* Returns the number of bytes processed if the domain ID is valid; otherwise,
* returns one of the following errors:
* -EINVAL if the ID is not a number
* -ENODEV if the ID exceeds the maximum value configured for the system
*/
static ssize_t unassign_control_domain_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int ret;
unsigned long domid;
struct mdev_device *mdev = mdev_from_dev(dev);
struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
unsigned long max_domid = matrix_mdev->matrix.adm_max;
/* If the guest is running, disallow un-assignment of control domain */
if (matrix_mdev->kvm)
return -EBUSY;
ret = kstrtoul(buf, 0, &domid);
if (ret)
return ret;
if (domid > max_domid)
return -ENODEV;
mutex_lock(&matrix_dev->lock);
clear_bit_inv(domid, matrix_mdev->matrix.adm);
mutex_unlock(&matrix_dev->lock);
return count;
}
DEVICE_ATTR_WO(unassign_control_domain);
static ssize_t control_domains_show(struct device *dev,
struct device_attribute *dev_attr,
char *buf)
{
unsigned long id;
int nchars = 0;
int n;
char *bufpos = buf;
struct mdev_device *mdev = mdev_from_dev(dev);
struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
unsigned long max_domid = matrix_mdev->matrix.adm_max;
mutex_lock(&matrix_dev->lock);
for_each_set_bit_inv(id, matrix_mdev->matrix.adm, max_domid + 1) {
n = sprintf(bufpos, "%04lx\n", id);
bufpos += n;
nchars += n;
}
mutex_unlock(&matrix_dev->lock);
return nchars;
}
DEVICE_ATTR_RO(control_domains);
static ssize_t matrix_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct mdev_device *mdev = mdev_from_dev(dev);
struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
char *bufpos = buf;
unsigned long apid;
unsigned long apqi;
unsigned long apid1;
unsigned long apqi1;
unsigned long napm_bits = matrix_mdev->matrix.apm_max + 1;
unsigned long naqm_bits = matrix_mdev->matrix.aqm_max + 1;
int nchars = 0;
int n;
apid1 = find_first_bit_inv(matrix_mdev->matrix.apm, napm_bits);
apqi1 = find_first_bit_inv(matrix_mdev->matrix.aqm, naqm_bits);
mutex_lock(&matrix_dev->lock);
if ((apid1 < napm_bits) && (apqi1 < naqm_bits)) {
for_each_set_bit_inv(apid, matrix_mdev->matrix.apm, napm_bits) {
for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm,
naqm_bits) {
n = sprintf(bufpos, "%02lx.%04lx\n", apid,
apqi);
bufpos += n;
nchars += n;
}
}
} else if (apid1 < napm_bits) {
for_each_set_bit_inv(apid, matrix_mdev->matrix.apm, napm_bits) {
n = sprintf(bufpos, "%02lx.\n", apid);
bufpos += n;
nchars += n;
}
} else if (apqi1 < naqm_bits) {
for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm, naqm_bits) {
n = sprintf(bufpos, ".%04lx\n", apqi);
bufpos += n;
nchars += n;
}
}
mutex_unlock(&matrix_dev->lock);
return nchars;
}
DEVICE_ATTR_RO(matrix);
static struct attribute *vfio_ap_mdev_attrs[] = {
&dev_attr_assign_adapter.attr,
&dev_attr_unassign_adapter.attr,
&dev_attr_assign_domain.attr,
&dev_attr_unassign_domain.attr,
&dev_attr_assign_control_domain.attr,
&dev_attr_unassign_control_domain.attr,
&dev_attr_control_domains.attr,
&dev_attr_matrix.attr,
NULL,
};
static struct attribute_group vfio_ap_mdev_attr_group = {
.attrs = vfio_ap_mdev_attrs
};
static const struct attribute_group *vfio_ap_mdev_attr_groups[] = {
&vfio_ap_mdev_attr_group,
NULL
};
static void vfio_ap_mdev_copy_masks(struct ap_matrix_mdev *matrix_mdev)
{
int nbytes;
unsigned long *apm, *aqm, *adm;
struct kvm_s390_crypto_cb *crycb = matrix_mdev->kvm->arch.crypto.crycb;
switch (matrix_mdev->kvm->arch.crypto.crycbd & CRYCB_FORMAT_MASK) {
case CRYCB_FORMAT2:
apm = (unsigned long *)crycb->apcb1.apm;
aqm = (unsigned long *)crycb->apcb1.aqm;
adm = (unsigned long *)crycb->apcb1.adm;
break;
case CRYCB_FORMAT1:
case CRYCB_FORMAT0:
apm = (unsigned long *)crycb->apcb0.apm;
aqm = (unsigned long *)crycb->apcb0.aqm;
adm = (unsigned long *)crycb->apcb0.adm;
break;
default:
/* cannot happen */
return;
}
nbytes = DIV_ROUND_UP(matrix_mdev->matrix.apm_max + 1, BITS_PER_BYTE);
memcpy(apm, matrix_mdev->matrix.apm, nbytes);
nbytes = DIV_ROUND_UP(matrix_mdev->matrix.aqm_max + 1, BITS_PER_BYTE);
memcpy(aqm, matrix_mdev->matrix.aqm, nbytes);
nbytes = DIV_ROUND_UP(matrix_mdev->matrix.adm_max + 1, BITS_PER_BYTE);
memcpy(adm, matrix_mdev->matrix.adm, nbytes);
}
/**
* vfio_ap_mdev_set_kvm
*
* @matrix_mdev: a mediated matrix device
* @kvm: reference to KVM instance
*
* Verifies no other mediated matrix device has @kvm and sets a reference to
* it in @matrix_mdev->kvm.
*
* Return 0 if no other mediated matrix device has a reference to @kvm;
* otherwise, returns an -EPERM.
*/
static int vfio_ap_mdev_set_kvm(struct ap_matrix_mdev *matrix_mdev,
struct kvm *kvm)
{
struct ap_matrix_mdev *m;
mutex_lock(&matrix_dev->lock);
list_for_each_entry(m, &matrix_dev->mdev_list, node) {
if ((m != matrix_mdev) && (m->kvm == kvm)) {
mutex_unlock(&matrix_dev->lock);
return -EPERM;
}
}
matrix_mdev->kvm = kvm;
mutex_unlock(&matrix_dev->lock);
return 0;
}
static int vfio_ap_mdev_group_notifier(struct notifier_block *nb,
unsigned long action, void *data)
{
int ret;
struct ap_matrix_mdev *matrix_mdev;
if (action != VFIO_GROUP_NOTIFY_SET_KVM)
return NOTIFY_OK;
matrix_mdev = container_of(nb, struct ap_matrix_mdev, group_notifier);
if (!data) {
matrix_mdev->kvm = NULL;
return NOTIFY_OK;
}
ret = vfio_ap_mdev_set_kvm(matrix_mdev, data);
if (ret)
return NOTIFY_DONE;
/* If there is no CRYCB pointer, then we can't copy the masks */
if (!matrix_mdev->kvm->arch.crypto.crycbd)
return NOTIFY_DONE;
vfio_ap_mdev_copy_masks(matrix_mdev);
return NOTIFY_OK;
}
static int vfio_ap_mdev_reset_queue(unsigned int apid, unsigned int apqi,
unsigned int retry)
{
struct ap_queue_status status;
do {
status = ap_zapq(AP_MKQID(apid, apqi));
switch (status.response_code) {
case AP_RESPONSE_NORMAL:
return 0;
case AP_RESPONSE_RESET_IN_PROGRESS:
case AP_RESPONSE_BUSY:
msleep(20);
break;
default:
/* things are really broken, give up */
return -EIO;
}
} while (retry--);
return -EBUSY;
}
static int vfio_ap_mdev_reset_queues(struct mdev_device *mdev)
{
int ret;
int rc = 0;
unsigned long apid, apqi;
struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
for_each_set_bit_inv(apid, matrix_mdev->matrix.apm,
matrix_mdev->matrix.apm_max + 1) {
for_each_set_bit_inv(apqi, matrix_mdev->matrix.aqm,
matrix_mdev->matrix.aqm_max + 1) {
ret = vfio_ap_mdev_reset_queue(apid, apqi, 1);
/*
* Regardless whether a queue turns out to be busy, or
* is not operational, we need to continue resetting
* the remaining queues.
*/
if (ret)
rc = ret;
}
}
return rc;
}
static int vfio_ap_mdev_open(struct mdev_device *mdev)
{
struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
unsigned long events;
int ret;
if (!try_module_get(THIS_MODULE))
return -ENODEV;
matrix_mdev->group_notifier.notifier_call = vfio_ap_mdev_group_notifier;
events = VFIO_GROUP_NOTIFY_SET_KVM;
ret = vfio_register_notifier(mdev_dev(mdev), VFIO_GROUP_NOTIFY,
&events, &matrix_mdev->group_notifier);
if (ret) {
module_put(THIS_MODULE);
return ret;
}
return 0;
}
static void vfio_ap_mdev_release(struct mdev_device *mdev)
{
struct ap_matrix_mdev *matrix_mdev = mdev_get_drvdata(mdev);
if (matrix_mdev->kvm)
kvm_arch_crypto_clear_masks(matrix_mdev->kvm);
vfio_ap_mdev_reset_queues(mdev);
vfio_unregister_notifier(mdev_dev(mdev), VFIO_GROUP_NOTIFY,
&matrix_mdev->group_notifier);
matrix_mdev->kvm = NULL;
module_put(THIS_MODULE);
}
static int vfio_ap_mdev_get_device_info(unsigned long arg)
{
unsigned long minsz;
struct vfio_device_info info;
minsz = offsetofend(struct vfio_device_info, num_irqs);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz)
return -EINVAL;
info.flags = VFIO_DEVICE_FLAGS_AP | VFIO_DEVICE_FLAGS_RESET;
info.num_regions = 0;
info.num_irqs = 0;
return copy_to_user((void __user *)arg, &info, minsz);
}
static ssize_t vfio_ap_mdev_ioctl(struct mdev_device *mdev,
unsigned int cmd, unsigned long arg)
{
int ret;
switch (cmd) {
case VFIO_DEVICE_GET_INFO:
ret = vfio_ap_mdev_get_device_info(arg);
break;
case VFIO_DEVICE_RESET:
ret = vfio_ap_mdev_reset_queues(mdev);
break;
default:
ret = -EOPNOTSUPP;
break;
}
return ret;
}
static const struct mdev_parent_ops vfio_ap_matrix_ops = {
.owner = THIS_MODULE,
.supported_type_groups = vfio_ap_mdev_type_groups,
.mdev_attr_groups = vfio_ap_mdev_attr_groups,
.create = vfio_ap_mdev_create,
.remove = vfio_ap_mdev_remove,
.open = vfio_ap_mdev_open,
.release = vfio_ap_mdev_release,
.ioctl = vfio_ap_mdev_ioctl,
};
int vfio_ap_mdev_register(void)
{
atomic_set(&matrix_dev->available_instances, MAX_ZDEV_ENTRIES_EXT);
return mdev_register_device(&matrix_dev->device, &vfio_ap_matrix_ops);
}
void vfio_ap_mdev_unregister(void)
{
mdev_unregister_device(&matrix_dev->device);
}
drivers/s390/crypto/vfio_ap_private.h 0 → 100644
View file @ dd5bd0a6
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Private data and functions for adjunct processor VFIO matrix driver.
*
* Author(s): Tony Krowiak <akrowiak@linux.ibm.com>
* Halil Pasic <pasic@linux.ibm.com>
*
* Copyright IBM Corp. 2018
*/
#ifndef _VFIO_AP_PRIVATE_H_
#define _VFIO_AP_PRIVATE_H_
#include <linux/types.h>
#include <linux/device.h>
#include <linux/mdev.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include "ap_bus.h"
#define VFIO_AP_MODULE_NAME "vfio_ap"
#define VFIO_AP_DRV_NAME "vfio_ap"
/**
* ap_matrix_dev - the AP matrix device structure
* @device: generic device structure associated with the AP matrix device
* @available_instances: number of mediated matrix devices that can be created
* @info: the struct containing the output from the PQAP(QCI) instruction
* mdev_list: the list of mediated matrix devices created
* lock: mutex for locking the AP matrix device. This lock will be
* taken every time we fiddle with state managed by the vfio_ap
* driver, be it using @mdev_list or writing the state of a
* single ap_matrix_mdev device. It's quite coarse but we don't
* expect much contention.
*/
struct ap_matrix_dev {
struct device device;
atomic_t available_instances;
struct ap_config_info info;
struct list_head mdev_list;
struct mutex lock;
};
extern struct ap_matrix_dev *matrix_dev;
/**
* The AP matrix is comprised of three bit masks identifying the adapters,
* queues (domains) and control domains that belong to an AP matrix. The bits i
* each mask, from least significant to most significant bit, correspond to IDs
* 0 to 255. When a bit is set, the corresponding ID belongs to the matrix.
*
* @apm_max: max adapter number in @apm
* @apm identifies the AP adapters in the matrix
* @aqm_max: max domain number in @aqm
* @aqm identifies the AP queues (domains) in the matrix
* @adm_max: max domain number in @adm
* @adm identifies the AP control domains in the matrix
*/
struct ap_matrix {
unsigned long apm_max;
DECLARE_BITMAP(apm, 256);
unsigned long aqm_max;
DECLARE_BITMAP(aqm, 256);
unsigned long adm_max;
DECLARE_BITMAP(adm, 256);
};
/**
* struct ap_matrix_mdev - the mediated matrix device structure
* @list: allows the ap_matrix_mdev struct to be added to a list
* @matrix: the adapters, usage domains and control domains assigned to the
* mediated matrix device.
* @group_notifier: notifier block used for specifying callback function for
* handling the VFIO_GROUP_NOTIFY_SET_KVM event
* @kvm: the struct holding guest's state
*/
struct ap_matrix_mdev {
struct list_head node;
struct ap_matrix matrix;
struct notifier_block group_notifier;
struct kvm *kvm;
};
extern int vfio_ap_mdev_register(void);
extern void vfio_ap_mdev_unregister(void);
#endif /* _VFIO_AP_PRIVATE_H_ */
include/uapi/linux/vfio.h
View file @ dd5bd0a6
......@@ -200,6 +200,7 @@ struct vfio_device_info {
#define VFIO_DEVICE_FLAGS_PLATFORM (1 << 2) /* vfio-platform device */
#define VFIO_DEVICE_FLAGS_AMBA (1 << 3) /* vfio-amba device */
#define VFIO_DEVICE_FLAGS_CCW (1 << 4) /* vfio-ccw device */
#define VFIO_DEVICE_FLAGS_AP (1 << 5) /* vfio-ap device */
__u32 num_regions; /* Max region index + 1 */
__u32 num_irqs; /* Max IRQ index + 1 */
};
......@@ -215,6 +216,7 @@ struct vfio_device_info {
#define VFIO_DEVICE_API_PLATFORM_STRING "vfio-platform"
#define VFIO_DEVICE_API_AMBA_STRING "vfio-amba"
#define VFIO_DEVICE_API_CCW_STRING "vfio-ccw"
#define VFIO_DEVICE_API_AP_STRING "vfio-ap"
/**
* VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7