Commit ddc752a4 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] use bcd2bin/bin2bcd
  [IA64] Ensure cpu0 can access per-cpu variables in early boot code
parents 31bad924 430ac5ba
......@@ -236,7 +236,7 @@ extern struct ia64_sal_desc_ptc *ia64_ptc_domain_info;
extern unsigned short sal_revision; /* supported SAL spec revision */
extern unsigned short sal_version; /* SAL version; OEM dependent */
#define SAL_VERSION_CODE(major, minor) ((BIN2BCD(major) << 8) | BIN2BCD(minor))
#define SAL_VERSION_CODE(major, minor) ((bin2bcd(major) << 8) | bin2bcd(minor))
extern const char *ia64_sal_strerror (long status);
extern void ia64_sal_init (struct ia64_sal_systab *sal_systab);
......
......@@ -359,7 +359,31 @@ start_ap:
mov ar.rsc=0 // place RSE in enforced lazy mode
;;
loadrs // clear the dirty partition
mov IA64_KR(PER_CPU_DATA)=r0 // clear physical per-CPU base
movl r19=__phys_per_cpu_start
mov r18=PERCPU_PAGE_SIZE
;;
#ifndef CONFIG_SMP
add r19=r19,r18
;;
#else
(isAP) br.few 2f
mov r20=r19
sub r19=r19,r18
;;
shr.u r18=r18,3
1:
ld8 r21=[r20],8;;
st8[r19]=r21,8
adds r18=-1,r18;;
cmp4.lt p7,p6=0,r18
(p7) br.cond.dptk.few 1b
2:
#endif
tpa r19=r19
;;
.pred.rel.mutex isBP,isAP
(isBP) mov IA64_KR(PER_CPU_DATA)=r19 // per-CPU base for cpu0
(isAP) mov IA64_KR(PER_CPU_DATA)=r0 // clear physical per-CPU base
;;
mov ar.bspstore=r2 // establish the new RSE stack
;;
......
......@@ -927,16 +927,18 @@ cpu_init (void)
if (smp_processor_id() == 0) {
cpu_set(0, per_cpu(cpu_sibling_map, 0));
cpu_set(0, cpu_core_map[0]);
}
#endif
} else {
/*
* We set ar.k3 so that assembly code in MCA handler can compute
* Set ar.k3 so that assembly code in MCA handler can compute
* physical addresses of per cpu variables with a simple:
* phys = ar.k3 + &per_cpu_var
* and the alt-dtlb-miss handler can set per-cpu mapping into
* the TLB when needed. head.S already did this for cpu0.
*/
ia64_set_kr(IA64_KR_PER_CPU_DATA,
ia64_tpa(cpu_data) - (long) __per_cpu_start);
}
#endif
get_max_cacheline_size();
......
......@@ -467,7 +467,9 @@ start_secondary (void *unused)
{
/* Early console may use I/O ports */
ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase));
#ifndef CONFIG_PRINTK_TIME
Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id());
#endif
efi_map_pal_code();
cpu_init();
preempt_disable();
......
......@@ -215,6 +215,9 @@ SECTIONS
/* Per-cpu data: */
percpu : { } :percpu
. = ALIGN(PERCPU_PAGE_SIZE);
#ifdef CONFIG_SMP
. = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */
#endif
__phys_per_cpu_start = .;
.data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET)
{
......
......@@ -163,8 +163,14 @@ per_cpu_init (void)
* get_zeroed_page().
*/
if (first_time) {
void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
first_time=0;
for (cpu = 0; cpu < NR_CPUS; cpu++) {
__per_cpu_offset[0] = (char *) cpu0_data - __per_cpu_start;
per_cpu(local_per_cpu_offset, 0) = __per_cpu_offset[0];
for (cpu = 1; cpu < NR_CPUS; cpu++) {
memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start);
__per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start;
cpu_data += PERCPU_PAGE_SIZE;
......@@ -177,7 +183,7 @@ per_cpu_init (void)
static inline void
alloc_per_cpu_data(void)
{
cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS,
cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS-1,
PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS));
}
#else
......
......@@ -143,7 +143,11 @@ static void *per_cpu_node_setup(void *cpu_data, int node)
int cpu;
for_each_possible_early_cpu(cpu) {
if (node == node_cpuid[cpu].nid) {
if (cpu == 0) {
void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE;
__per_cpu_offset[cpu] = (char*)cpu0_data -
__per_cpu_start;
} else if (node == node_cpuid[cpu].nid) {
memcpy(__va(cpu_data), __phys_per_cpu_start,
__per_cpu_end - __per_cpu_start);
__per_cpu_offset[cpu] = (char*)__va(cpu_data) -
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment