ide-pmac: use __ide_wait_stat()

* Use __ide_wait_stat() instead of wait_for_ready() in pmac_ide_do_setfeature().

While at it do following changes to match __ide_wait_stat() call in
ide_config_drive_speed():

* Wait WAIT_CMD time (20 sec) instead of 2 sec for device to clear BUSY_STAT.

* Check DRQ_STAT bit (shouldn't be set for good device status).

Also remove no longer needed wait_for_ready() from ide-iops.c.
Acked-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 218ee5f3
...@@ -472,35 +472,6 @@ int drive_is_ready (ide_drive_t *drive) ...@@ -472,35 +472,6 @@ int drive_is_ready (ide_drive_t *drive)
EXPORT_SYMBOL(drive_is_ready); EXPORT_SYMBOL(drive_is_ready);
/*
* Global for All, and taken from ide-pmac.c. Can be called
* with spinlock held & IRQs disabled, so don't schedule !
*/
int wait_for_ready (ide_drive_t *drive, int timeout)
{
ide_hwif_t *hwif = HWIF(drive);
u8 stat = 0;
while(--timeout) {
stat = hwif->INB(IDE_STATUS_REG);
if (!(stat & BUSY_STAT)) {
if (drive->ready_stat == 0)
break;
else if ((stat & drive->ready_stat)||(stat & ERR_STAT))
break;
}
mdelay(1);
}
if ((stat & ERR_STAT) || timeout <= 0) {
if (stat & ERR_STAT) {
printk(KERN_ERR "%s: wait_for_ready, "
"error status: %x\n", drive->name, stat);
}
return 1;
}
return 0;
}
/* /*
* This routine busy-waits for the drive status to be not "busy". * This routine busy-waits for the drive status to be not "busy".
* It then checks the status for all of the "good" bits and none * It then checks the status for all of the "good" bits and none
...@@ -512,7 +483,7 @@ int wait_for_ready (ide_drive_t *drive, int timeout) ...@@ -512,7 +483,7 @@ int wait_for_ready (ide_drive_t *drive, int timeout)
* setting a timer to wake up at half second intervals thereafter, * setting a timer to wake up at half second intervals thereafter,
* until timeout is achieved, before timing out. * until timeout is achieved, before timing out.
*/ */
static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat) int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat)
{ {
ide_hwif_t *hwif = drive->hwif; ide_hwif_t *hwif = drive->hwif;
unsigned long flags; unsigned long flags;
......
...@@ -541,7 +541,8 @@ static int ...@@ -541,7 +541,8 @@ static int
pmac_ide_do_setfeature(ide_drive_t *drive, u8 command) pmac_ide_do_setfeature(ide_drive_t *drive, u8 command)
{ {
ide_hwif_t *hwif = HWIF(drive); ide_hwif_t *hwif = HWIF(drive);
int result = 1; int result;
u8 stat;
disable_irq_nosync(hwif->irq); disable_irq_nosync(hwif->irq);
udelay(1); udelay(1);
...@@ -552,9 +553,9 @@ pmac_ide_do_setfeature(ide_drive_t *drive, u8 command) ...@@ -552,9 +553,9 @@ pmac_ide_do_setfeature(ide_drive_t *drive, u8 command)
hwif->OUTB(command, IDE_NSECTOR_REG); hwif->OUTB(command, IDE_NSECTOR_REG);
hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG); hwif->OUTB(SETFEATURES_XFER, IDE_FEATURE_REG);
hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG); hwif->OUTBSYNC(drive, WIN_SETFEATURES, IDE_COMMAND_REG);
udelay(1); result = __ide_wait_stat(drive, drive->ready_stat,
/* Timeout bumped for some powerbooks */ BUSY_STAT|DRQ_STAT|ERR_STAT,
result = wait_for_ready(drive, 2000); WAIT_CMD, &stat);
hwif->OUTB(drive->ctl, IDE_CONTROL_REG); hwif->OUTB(drive->ctl, IDE_CONTROL_REG);
if (result) if (result)
printk(KERN_ERR "%s: pmac_ide_do_setfeature disk not ready " printk(KERN_ERR "%s: pmac_ide_do_setfeature disk not ready "
......
...@@ -1153,7 +1153,7 @@ extern void SELECT_MASK(ide_drive_t *, int); ...@@ -1153,7 +1153,7 @@ extern void SELECT_MASK(ide_drive_t *, int);
extern void QUIRK_LIST(ide_drive_t *); extern void QUIRK_LIST(ide_drive_t *);
extern int drive_is_ready(ide_drive_t *); extern int drive_is_ready(ide_drive_t *);
extern int wait_for_ready(ide_drive_t *, int /* timeout */); int __ide_wait_stat(ide_drive_t *, u8, u8, unsigned long);
/* /*
* taskfile io for disks for now...and builds request from ide_ioctl * taskfile io for disks for now...and builds request from ide_ioctl
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment