Merge branch 'be2net'

Sathya Perla says:

====================
be2net: patch set

Hi David, this patch set includes 3 bug fixes to the be2net driver.

Patch 1 fixes a vlan isolation issue with VFs. When a VF is placed in
promiscous mode, it could receive packets belonging to any vlan, as
the PF driver grants vlan promisc capability to VFs. The PF
driver now disables the vlan promisc capability for VFs to fix this
problem.

Patch 2 fixes the call to MODIFY_EQ_DELAY FW cmd to not include more
than 8 EQs per cmd. The FW is not capable of handling more than 8 EQs
per cmd.

Patch 3 fixes an EEH error detection issue. On Power platforms,
when an EEH error occurs, the slot disconnect state is more reliably
detected via an MMIO read compared to a config read. So, the error
register reads that occur every second are now done via MMIO.

Pls apply this patch set to the "net" tree. Thanks!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/emulex/benet/be.h

@@ -354,6 +354,7 @@ struct be_vf_cfg {
 	u16 vlan_tag;
 	u32 tx_rate;
 	u32 plink_tracking;
+	u32 privileges;
 };
 
 enum vf_state {
@@ -423,6 +424,7 @@ struct be_adapter {
 
 	u8 __iomem *csr;	/* CSR BAR used only for BE2/3 */
 	u8 __iomem *db;		/* Door Bell */
+	u8 __iomem *pcicfg;	/* On SH,BEx only. Shadow of PCI config space */
 
 	struct mutex mbox_lock; /* For serializing mbox cmds to BE card */
 	struct be_dma_mem mbox_mem;

drivers/net/ethernet/emulex/benet/be_cmds.c

@@ -1902,23 +1902,19 @@ int be_cmd_modify_eqd(struct be_adapter *adapter, struct be_set_eqd *set_eqd,
 {
 	int num_eqs, i = 0;
 
-	if (lancer_chip(adapter) && num > 8) {
 	while (num) {
 		num_eqs = min(num, 8);
 		__be_cmd_modify_eqd(adapter, &set_eqd[i], num_eqs);
 		i += num_eqs;
 		num -= num_eqs;
 	}
-	} else {
-		__be_cmd_modify_eqd(adapter, set_eqd, num);
-	}
 
 	return 0;
 }
 
 /* Uses sycnhronous mcc */
 int be_cmd_vlan_config(struct be_adapter *adapter, u32 if_id, u16 *vtag_array,
-		       u32 num)
+		       u32 num, u32 domain)
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_vlan_config *req;
@@ -1936,6 +1932,7 @@ int be_cmd_vlan_config(struct be_adapter *adapter, u32 if_id, u16 *vtag_array,
 	be_wrb_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
 			       OPCODE_COMMON_NTWK_VLAN_CONFIG, sizeof(*req),
 			       wrb, NULL);
+	req->hdr.domain = domain;
 
 	req->interface_id = if_id;
 	req->untagged = BE_IF_FLAGS_UNTAGGED & be_if_cap_flags(adapter) ? 1 : 0;

drivers/net/ethernet/emulex/benet/be_cmds.h

@@ -2256,7 +2256,7 @@ int lancer_cmd_get_pport_stats(struct be_adapter *adapter,
 int be_cmd_get_fw_ver(struct be_adapter *adapter);
 int be_cmd_modify_eqd(struct be_adapter *adapter, struct be_set_eqd *, int num);
 int be_cmd_vlan_config(struct be_adapter *adapter, u32 if_id, u16 *vtag_array,
-		       u32 num);
+		       u32 num, u32 domain);
 int be_cmd_rx_filter(struct be_adapter *adapter, u32 flags, u32 status);
 int be_cmd_set_flow_control(struct be_adapter *adapter, u32 tx_fc, u32 rx_fc);
 int be_cmd_get_flow_control(struct be_adapter *adapter, u32 *tx_fc, u32 *rx_fc);

drivers/net/ethernet/emulex/benet/be_main.c

@@ -1171,7 +1171,7 @@ static int be_vid_config(struct be_adapter *adapter)
 	for_each_set_bit(i, adapter->vids, VLAN_N_VID)
 		vids[num++] = cpu_to_le16(i);
 
-	status = be_cmd_vlan_config(adapter, adapter->if_handle, vids, num);
+	status = be_cmd_vlan_config(adapter, adapter->if_handle, vids, num, 0);
 	if (status) {
 		dev_err(dev, "Setting HW VLAN filtering failed\n");
 		/* Set to VLAN promisc mode as setting VLAN filter failed */
@@ -1380,11 +1380,67 @@ static int be_get_vf_config(struct net_device *netdev, int vf,
 	return 0;
 }
 
+static int be_set_vf_tvt(struct be_adapter *adapter, int vf, u16 vlan)
+{
+	struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf];
+	u16 vids[BE_NUM_VLANS_SUPPORTED];
+	int vf_if_id = vf_cfg->if_handle;
+	int status;
+
+	/* Enable Transparent VLAN Tagging */
+	status = be_cmd_set_hsw_config(adapter, vlan, vf + 1, vf_if_id, 0);
+	if (status)
+		return status;
+
+	/* Clear pre-programmed VLAN filters on VF if any, if TVT is enabled */
+	vids[0] = 0;
+	status = be_cmd_vlan_config(adapter, vf_if_id, vids, 1, vf + 1);
+	if (!status)
+		dev_info(&adapter->pdev->dev,
+			 "Cleared guest VLANs on VF%d", vf);
+
+	/* After TVT is enabled, disallow VFs to program VLAN filters */
+	if (vf_cfg->privileges & BE_PRIV_FILTMGMT) {
+		status = be_cmd_set_fn_privileges(adapter, vf_cfg->privileges &
+						  ~BE_PRIV_FILTMGMT, vf + 1);
+		if (!status)
+			vf_cfg->privileges &= ~BE_PRIV_FILTMGMT;
+	}
+	return 0;
+}
+
+static int be_clear_vf_tvt(struct be_adapter *adapter, int vf)
+{
+	struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf];
+	struct device *dev = &adapter->pdev->dev;
+	int status;
+
+	/* Reset Transparent VLAN Tagging. */
+	status = be_cmd_set_hsw_config(adapter, BE_RESET_VLAN_TAG_ID, vf + 1,
+				       vf_cfg->if_handle, 0);
+	if (status)
+		return status;
+
+	/* Allow VFs to program VLAN filtering */
+	if (!(vf_cfg->privileges & BE_PRIV_FILTMGMT)) {
+		status = be_cmd_set_fn_privileges(adapter, vf_cfg->privileges |
+						  BE_PRIV_FILTMGMT, vf + 1);
+		if (!status) {
+			vf_cfg->privileges |= BE_PRIV_FILTMGMT;
+			dev_info(dev, "VF%d: FILTMGMT priv enabled", vf);
+		}
+	}
+
+	dev_info(dev,
+		 "Disable/re-enable i/f in VM to clear Transparent VLAN tag");
+	return 0;
+}
+
 static int be_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
 	struct be_vf_cfg *vf_cfg = &adapter->vf_cfg[vf];
-	int status = 0;
+	int status;
 
 	if (!sriov_enabled(adapter))
 		return -EPERM;
@@ -1394,24 +1450,19 @@ static int be_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
 
 	if (vlan || qos) {
 		vlan |= qos << VLAN_PRIO_SHIFT;
-		if (vf_cfg->vlan_tag != vlan)
-			status = be_cmd_set_hsw_config(adapter, vlan, vf + 1,
-						       vf_cfg->if_handle, 0);
+		status = be_set_vf_tvt(adapter, vf, vlan);
 	} else {
-		/* Reset Transparent Vlan Tagging. */
-		status = be_cmd_set_hsw_config(adapter, BE_RESET_VLAN_TAG_ID,
-					       vf + 1, vf_cfg->if_handle, 0);
+		status = be_clear_vf_tvt(adapter, vf);
 	}
 
 	if (status) {
 		dev_err(&adapter->pdev->dev,
-			"VLAN %d config on VF %d failed : %#x\n", vlan,
-			vf, status);
+			"VLAN %d config on VF %d failed : %#x\n", vlan, vf,
+			status);
 		return be_cmd_status(status);
 	}
 
 	vf_cfg->vlan_tag = vlan;
-
 	return 0;
 }
 
@@ -2772,14 +2823,12 @@ void be_detect_error(struct be_adapter *adapter)
 			}
 		}
 	} else {
-		pci_read_config_dword(adapter->pdev,
-				      PCICFG_UE_STATUS_LOW, &ue_lo);
-		pci_read_config_dword(adapter->pdev,
-				      PCICFG_UE_STATUS_HIGH, &ue_hi);
-		pci_read_config_dword(adapter->pdev,
-				      PCICFG_UE_STATUS_LOW_MASK, &ue_lo_mask);
-		pci_read_config_dword(adapter->pdev,
-				      PCICFG_UE_STATUS_HI_MASK, &ue_hi_mask);
+		ue_lo = ioread32(adapter->pcicfg + PCICFG_UE_STATUS_LOW);
+		ue_hi = ioread32(adapter->pcicfg + PCICFG_UE_STATUS_HIGH);
+		ue_lo_mask = ioread32(adapter->pcicfg +
+				      PCICFG_UE_STATUS_LOW_MASK);
+		ue_hi_mask = ioread32(adapter->pcicfg +
+				      PCICFG_UE_STATUS_HI_MASK);
 
 		ue_lo = (ue_lo & ~ue_lo_mask);
 		ue_hi = (ue_hi & ~ue_hi_mask);
@@ -3339,7 +3388,6 @@ static int be_if_create(struct be_adapter *adapter, u32 *if_handle,
 			u32 cap_flags, u32 vf)
 {
 	u32 en_flags;
-	int status;
 
 	en_flags = BE_IF_FLAGS_UNTAGGED | BE_IF_FLAGS_BROADCAST |
 		   BE_IF_FLAGS_MULTICAST | BE_IF_FLAGS_PASS_L3L4_ERRORS |
@@ -3347,10 +3395,7 @@ static int be_if_create(struct be_adapter *adapter, u32 *if_handle,
 
 	en_flags &= cap_flags;
 
-	status = be_cmd_if_create(adapter, cap_flags, en_flags,
-				  if_handle, vf);
-
-	return status;
+	return be_cmd_if_create(adapter, cap_flags, en_flags, if_handle, vf);
 }
 
 static int be_vfs_if_create(struct be_adapter *adapter)
@@ -3368,8 +3413,13 @@ static int be_vfs_if_create(struct be_adapter *adapter)
 		if (!BE3_chip(adapter)) {
 			status = be_cmd_get_profile_config(adapter, &res,
 							   vf + 1);
-			if (!status)
+			if (!status) {
 				cap_flags = res.if_cap_flags;
+				/* Prevent VFs from enabling VLAN promiscuous
+				 * mode
+				 */
+				cap_flags &= ~BE_IF_FLAGS_VLAN_PROMISCUOUS;
+			}
 		}
 
 		status = be_if_create(adapter, &vf_cfg->if_handle,
@@ -3403,7 +3453,6 @@ static int be_vf_setup(struct be_adapter *adapter)
 	struct device *dev = &adapter->pdev->dev;
 	struct be_vf_cfg *vf_cfg;
 	int status, old_vfs, vf;
-	u32 privileges;
 
 	old_vfs = pci_num_vf(adapter->pdev);
 
@@ -3433,16 +3482,19 @@ static int be_vf_setup(struct be_adapter *adapter)
 
 	for_all_vfs(adapter, vf_cfg, vf) {
 		/* Allow VFs to programs MAC/VLAN filters */
-		status = be_cmd_get_fn_privileges(adapter, &privileges, vf + 1);
-		if (!status && !(privileges & BE_PRIV_FILTMGMT)) {
+		status = be_cmd_get_fn_privileges(adapter, &vf_cfg->privileges,
+						  vf + 1);
+		if (!status && !(vf_cfg->privileges & BE_PRIV_FILTMGMT)) {
 			status = be_cmd_set_fn_privileges(adapter,
-							  privileges |
+							  vf_cfg->privileges |
 							  BE_PRIV_FILTMGMT,
 							  vf + 1);
-			if (!status)
+			if (!status) {
+				vf_cfg->privileges |= BE_PRIV_FILTMGMT;
 				dev_info(dev, "VF%d has FILTMGMT privilege\n",
 					 vf);
 			}
+		}
 
 		/* Allow full available bandwidth */
 		if (!old_vfs)
@@ -4820,24 +4872,37 @@ static int be_roce_map_pci_bars(struct be_adapter *adapter)
 
 static int be_map_pci_bars(struct be_adapter *adapter)
 {
+	struct pci_dev *pdev = adapter->pdev;
 	u8 __iomem *addr;
 
 	if (BEx_chip(adapter) && be_physfn(adapter)) {
-		adapter->csr = pci_iomap(adapter->pdev, 2, 0);
+		adapter->csr = pci_iomap(pdev, 2, 0);
 		if (!adapter->csr)
 			return -ENOMEM;
 	}
 
-	addr = pci_iomap(adapter->pdev, db_bar(adapter), 0);
+	addr = pci_iomap(pdev, db_bar(adapter), 0);
 	if (!addr)
 		goto pci_map_err;
 	adapter->db = addr;
 
+	if (skyhawk_chip(adapter) || BEx_chip(adapter)) {
+		if (be_physfn(adapter)) {
+			/* PCICFG is the 2nd BAR in BE2 */
+			addr = pci_iomap(pdev, BE2_chip(adapter) ? 1 : 0, 0);
+			if (!addr)
+				goto pci_map_err;
+			adapter->pcicfg = addr;
+		} else {
+			adapter->pcicfg = adapter->db + SRIOV_VF_PCICFG_OFFSET;
+		}
+	}
+
 	be_roce_map_pci_bars(adapter);
 	return 0;
 
 pci_map_err:
-	dev_err(&adapter->pdev->dev, "Error in mapping PCI BARs\n");
+	dev_err(&pdev->dev, "Error in mapping PCI BARs\n");
 	be_unmap_pci_bars(adapter);
 	return -ENOMEM;
 }