mfd: ab8500-gpadc: Squash a whole bunch of Checkpatch warnings and one error

WARNING: line over 80 characters
+#define ADC_CH_IBAT_MIN                        (-6000) /* mA range measured by ADC for ib
t*/

WARNING: line over 80 characters
+#define ADC_CH_IBAT_MIN_V              (-60)   /* mV range measured by ADC for ibat*/

WARNING: suspect code indent for conditional statements (16, 20)
+               if (!strcmp(name, dev_name(gpadc->dev)))
+                   return gpadc;

WARNING: suspect code indent for conditional statements (0, 16)
+if (ad_value < 0) {
+               dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",

WARNING: quoted string split across lines
+               dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
+                       " %d AD: 0x%x\n", channel, ad_value);

WARNING: Missing a blank line after declarations
+       int raw_data;
+       raw_data = ab8500_gpadc_double_read_raw(gpadc, channel,

WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
+               msleep(10);

ERROR: else should follow close brace '}'
+       }
+       else

WARNING: line over 80 characters
+                       delay_max = 10000; /* large range to optimise sleep mode */

WARNING: line over 80 characters
+                       gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain;

WARNING: line over 80 characters
+       gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL);

WARNING: Possible unnecessary 'out of memory' message
+       if (!gpadc) {
+               dev_err(&pdev->dev, "Error: No memory\n");

WARNING: space prohibited before semicolon
+       return ;

WARNING: void function return statements are not generally useful
+       return ;
+}

WARNING: quoted string split across lines
+MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
+               "M'boumba Cedric Madianga");

total: 1 errors, 14 warnings, 1089 lines checked

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

drivers/mfd/ab8500-gpadc.c

@@ -98,9 +98,9 @@
 #define ADC_CH_BKBAT_MAX	3200
 
 /* GPADC constants from AB8540 spec */
-#define ADC_CH_IBAT_MIN			(-6000) /* mA range measured by ADC for ibat*/
+#define ADC_CH_IBAT_MIN		(-6000) /* mA range measured by ADC for ibat */
 #define ADC_CH_IBAT_MAX		6000
-#define ADC_CH_IBAT_MIN_V		(-60)	/* mV range measured by ADC for ibat*/
+#define ADC_CH_IBAT_MIN_V	(-60)	/* mV range measured by ADC for ibat */
 #define ADC_CH_IBAT_MAX_V	60
 #define IBAT_VDROP_L		(-56)  /* mV */
 #define IBAT_VDROP_H		56
@@ -315,11 +315,12 @@ int ab8500_gpadc_sw_hw_convert(struct ab8500_gpadc *gpadc, u8 channel,
 
 	ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
 			trig_edge, trig_timer, conv_type);
-/* On failure retry a second time */
+
+	/* On failure retry a second time */
 	if (ad_value < 0)
 		ad_value = ab8500_gpadc_read_raw(gpadc, channel, avg_sample,
 			trig_edge, trig_timer, conv_type);
-if (ad_value < 0) {
+	if (ad_value < 0) {
 		dev_err(gpadc->dev, "GPADC raw value failed ch: %d\n",
 				channel);
 		return ad_value;
@@ -327,8 +328,9 @@ if (ad_value < 0) {
 
 	voltage = ab8500_gpadc_ad_to_voltage(gpadc, channel, ad_value);
 	if (voltage < 0)
-		dev_err(gpadc->dev, "GPADC to voltage conversion failed ch:"
-			" %d AD: 0x%x\n", channel, ad_value);
+		dev_err(gpadc->dev,
+			"GPADC to voltage conversion failed ch: %d AD: 0x%x\n",
+			channel, ad_value);
 
 	return voltage;
 }
@@ -348,10 +350,9 @@ EXPORT_SYMBOL(ab8500_gpadc_sw_hw_convert);
 int ab8500_gpadc_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
 		u8 avg_sample, u8 trig_edge, u8 trig_timer, u8 conv_type)
 {
-	int raw_data;
-	raw_data = ab8500_gpadc_double_read_raw(gpadc, channel,
-			avg_sample, trig_edge, trig_timer, conv_type, NULL);
-	return raw_data;
+	return ab8500_gpadc_double_read_raw(gpadc, channel, avg_sample,
+					    trig_edge, trig_timer, conv_type,
+					    NULL);
 }
 
 int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
@@ -388,7 +389,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
 			goto out;
 		if (!(val & GPADC_BUSY))
 			break;
-		msleep(10);
+		msleep(20);
 	} while (++looplimit < 10);
 	if (looplimit >= 10 && (val & GPADC_BUSY)) {
 		dev_err(gpadc->dev, "gpadc_conversion: GPADC busy");
@@ -421,8 +422,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
 		val_reg1 |= EN_TRIG_EDGE;
 		if (trig_edge)
 			val_reg1 |= EN_FALLING;
-	}
-	else
+	} else
 		ret = abx500_set_register_interruptible(gpadc->dev,
 				AB8500_GPADC, AB8500_GPADC_CTRL2_REG, val);
 	if (ret < 0) {
@@ -449,7 +449,7 @@ int ab8500_gpadc_double_read_raw(struct ab8500_gpadc *gpadc, u8 channel,
 			* remove when hardware will be availible
 			*/
 			delay_min = 1000; /* Delay in micro seconds */
-			delay_max = 10000; /* large range to optimise sleep mode */
+			delay_max = 10000; /* large range optimises sleepmode */
 			break;
 		}
 		/* Intentional fallthrough */
@@ -785,9 +785,10 @@ static void ab8500_gpadc_read_calibration_data(struct ab8500_gpadc *gpadc)
 				<< CALIB_SHIFT_IBAT)
 				/ (ADC_CH_IBAT_MAX_V - ADC_CH_IBAT_MIN_V);
 
-			gpadc->cal_data[ADC_INPUT_IBAT].gain = V_gain * V2A_gain;
-			gpadc->cal_data[ADC_INPUT_IBAT].offset = V_offset *
-				V2A_gain + V2A_offset;
+			gpadc->cal_data[ADC_INPUT_IBAT].gain =
+				V_gain * V2A_gain;
+			gpadc->cal_data[ADC_INPUT_IBAT].offset =
+				V_offset * V2A_gain + V2A_offset;
 		} else {
 			gpadc->cal_data[ADC_INPUT_IBAT].gain = 0;
 		}
@@ -923,11 +924,10 @@ static int ab8500_gpadc_probe(struct platform_device *pdev)
 	int ret = 0;
 	struct ab8500_gpadc *gpadc;
 
-	gpadc = devm_kzalloc(&pdev->dev, sizeof(struct ab8500_gpadc), GFP_KERNEL);
-	if (!gpadc) {
-		dev_err(&pdev->dev, "Error: No memory\n");
+	gpadc = devm_kzalloc(&pdev->dev,
+			     sizeof(struct ab8500_gpadc), GFP_KERNEL);
+	if (!gpadc)
 		return -ENOMEM;
-	}
 
 	gpadc->irq_sw = platform_get_irq_byname(pdev, "SW_CONV_END");
 	if (gpadc->irq_sw < 0)
@@ -1076,14 +1076,15 @@ void ab8540_gpadc_get_otp(struct ab8500_gpadc *gpadc,
 	*vbat_h  = gpadc->cal_data[ADC_INPUT_VBAT].otp_calib_hi;
 	*ibat_l  = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_lo;
 	*ibat_h  = gpadc->cal_data[ADC_INPUT_IBAT].otp_calib_hi;
-	return ;
 }
 
 subsys_initcall_sync(ab8500_gpadc_init);
 module_exit(ab8500_gpadc_exit);
 
 MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Arun R Murthy, Daniel Willerud, Johan Palsson,"
-		"M'boumba Cedric Madianga");
+MODULE_AUTHOR("Arun R Murthy");
+MODULE_AUTHOR("Daniel Willerud");
+MODULE_AUTHOR("Johan Palsson");
+MODULE_AUTHOR("M'boumba Cedric Madianga");
 MODULE_ALIAS("platform:ab8500_gpadc");
 MODULE_DESCRIPTION("AB8500 GPADC driver");