Commit df7c1d9a authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

V4L/DVB (12840): tm6000: add support for HVR900H

Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 8ae1fc6e
......@@ -40,6 +40,7 @@
#define TM6000_BOARD_ADSTECH_DUAL_TV 6
#define TM6000_BOARD_FREECOM_AND_SIMILAR 7
#define TM6000_BOARD_ADSTECH_MINI_DUAL_TV 8
#define TM6010_BOARD_HAUPPAUGE_900H 9
#define TM6000_MAXBOARDS 16
static unsigned int card[] = {[0 ... (TM6000_MAXBOARDS - 1)] = UNSET };
......@@ -161,6 +162,20 @@ struct tm6000_board tm6000_boards[] = {
},
.gpio_addr_tun_reset = TM6000_GPIO_4,
},
[TM6010_BOARD_HAUPPAUGE_900H] = {
.name = "Hauppauge HVR-900H",
.tuner_type = TUNER_XC2028, /* has a XC3028 */
.tuner_addr = 0xc2,
.demod_addr = 0x1e,
.type = TM6010,
.caps = {
.has_tuner = 1,
.has_dvb = 1,
.has_zl10353 = 1,
.has_eeprom = 1,
},
.gpio_addr_tun_reset = TM6000_GPIO_2,
},
};
/* table of devices that work with this driver */
......@@ -170,24 +185,20 @@ struct usb_device_id tm6000_id_table [] = {
{ USB_DEVICE(0x06e1, 0xf332), .driver_info = TM6000_BOARD_ADSTECH_DUAL_TV },
{ USB_DEVICE(0x14aa, 0x0620), .driver_info = TM6000_BOARD_FREECOM_AND_SIMILAR },
{ USB_DEVICE(0x06e1, 0xb339), .driver_info = TM6000_BOARD_ADSTECH_MINI_DUAL_TV },
{ USB_DEVICE(0x2040, 0x6600), .driver_info = TM6010_BOARD_HAUPPAUGE_900H },
{ },
};
static void tm6000_config_tuner (struct tm6000_core *dev)
{
request_module ("tuner");
if (dev->tuner_type == TUNER_XC2028) {
struct v4l2_priv_tun_config xc2028_cfg;
struct xc2028_ctrl ctl;
memset (&ctl,0,sizeof(ctl));
request_module ("tuner");
if (dev->tuner_type == TUNER_XC2028) {
if (dev->dev_type == TM6010)
ctl.fname = "xc3028-v27.fw";
else
ctl.fname = "tm6000-xc3028.fw";
ctl.mts = 1;
ctl.read_not_reliable = 1;
ctl.msleep = 10;
......@@ -195,6 +206,17 @@ static void tm6000_config_tuner (struct tm6000_core *dev)
xc2028_cfg.tuner = TUNER_XC2028;
xc2028_cfg.priv = &ctl;
switch(dev->model) {
case TM6010_BOARD_HAUPPAUGE_900H:
ctl.fname = "xc3028L-v36.fw";
break;
default:
if (dev->dev_type == TM6010)
ctl.fname = "xc3028-v27.fw";
else
ctl.fname = "tm6000-xc3028.fw";
}
printk(KERN_INFO "Setting firmware parameters for xc2028\n");
tm6000_i2c_call_clients(dev, TUNER_SET_CONFIG, &xc2028_cfg);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment