Commit e02e23d5 authored by Jisheng Zhang's avatar Jisheng Zhang Committed by Mark Brown

regulator: sy8824x: add prefixes to BUCK_EN and MODE macros

Add prefixes to BUCK_EN and MODE macros to namespace them.
Signed-off-by: default avatarJisheng Zhang <Jisheng.Zhang@synaptics.com>
Link: https://lore.kernel.org/r/20190829143927.395d0385@xhacker.debianSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent dab10674
......@@ -13,8 +13,8 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/of_regulator.h>
#define BUCK_EN (1 << 7)
#define MODE (1 << 6)
#define SY8824C_BUCK_EN (1 << 7)
#define SY8824C_MODE (1 << 6)
struct sy8824_config {
/* registers */
......@@ -41,10 +41,12 @@ static int sy8824_set_mode(struct regulator_dev *rdev, unsigned int mode)
switch (mode) {
case REGULATOR_MODE_FAST:
regmap_update_bits(rdev->regmap, cfg->mode_reg, MODE, MODE);
regmap_update_bits(rdev->regmap, cfg->mode_reg,
SY8824C_MODE, SY8824C_MODE);
break;
case REGULATOR_MODE_NORMAL:
regmap_update_bits(rdev->regmap, cfg->mode_reg, MODE, 0);
regmap_update_bits(rdev->regmap, cfg->mode_reg,
SY8824C_MODE, 0);
break;
default:
return -EINVAL;
......@@ -62,7 +64,7 @@ static unsigned int sy8824_get_mode(struct regulator_dev *rdev)
ret = regmap_read(rdev->regmap, cfg->mode_reg, &val);
if (ret < 0)
return ret;
if (val & MODE)
if (val & SY8824C_MODE)
return REGULATOR_MODE_FAST;
else
return REGULATOR_MODE_NORMAL;
......@@ -94,7 +96,7 @@ static int sy8824_regulator_register(struct sy8824_device_info *di,
rdesc->type = REGULATOR_VOLTAGE;
rdesc->n_voltages = cfg->vsel_count;
rdesc->enable_reg = cfg->enable_reg;
rdesc->enable_mask = BUCK_EN;
rdesc->enable_mask = SY8824C_BUCK_EN;
rdesc->min_uV = cfg->vsel_min;
rdesc->uV_step = cfg->vsel_step;
rdesc->vsel_reg = cfg->vol_reg;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment