Commit e0815f35 authored by Ezequiel Garcia's avatar Ezequiel Garcia Committed by Takashi Iwai

ALSA: maestro3: Remove unused AC97 register definitions

Signed-off-by: default avatarEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 10a3061a
......@@ -361,74 +361,6 @@ MODULE_PARM_DESC(amp_gpio, "GPIO pin number for external amp. (default = -1)");
#define DSP2HOST_REQ_I2SRATE 0x02
#define DSP2HOST_REQ_TIMER 0x04
/* AC97 registers */
/* XXX fix this crap up */
/*#define AC97_RESET 0x00*/
#define AC97_VOL_MUTE_B 0x8000
#define AC97_VOL_M 0x1F
#define AC97_LEFT_VOL_S 8
#define AC97_MASTER_VOL 0x02
#define AC97_LINE_LEVEL_VOL 0x04
#define AC97_MASTER_MONO_VOL 0x06
#define AC97_PC_BEEP_VOL 0x0A
#define AC97_PC_BEEP_VOL_M 0x0F
#define AC97_SROUND_MASTER_VOL 0x38
#define AC97_PC_BEEP_VOL_S 1
/*#define AC97_PHONE_VOL 0x0C
#define AC97_MIC_VOL 0x0E*/
#define AC97_MIC_20DB_ENABLE 0x40
/*#define AC97_LINEIN_VOL 0x10
#define AC97_CD_VOL 0x12
#define AC97_VIDEO_VOL 0x14
#define AC97_AUX_VOL 0x16*/
#define AC97_PCM_OUT_VOL 0x18
/*#define AC97_RECORD_SELECT 0x1A*/
#define AC97_RECORD_MIC 0x00
#define AC97_RECORD_CD 0x01
#define AC97_RECORD_VIDEO 0x02
#define AC97_RECORD_AUX 0x03
#define AC97_RECORD_MONO_MUX 0x02
#define AC97_RECORD_DIGITAL 0x03
#define AC97_RECORD_LINE 0x04
#define AC97_RECORD_STEREO 0x05
#define AC97_RECORD_MONO 0x06
#define AC97_RECORD_PHONE 0x07
/*#define AC97_RECORD_GAIN 0x1C*/
#define AC97_RECORD_VOL_M 0x0F
/*#define AC97_GENERAL_PURPOSE 0x20*/
#define AC97_POWER_DOWN_CTRL 0x26
#define AC97_ADC_READY 0x0001
#define AC97_DAC_READY 0x0002
#define AC97_ANALOG_READY 0x0004
#define AC97_VREF_ON 0x0008
#define AC97_PR0 0x0100
#define AC97_PR1 0x0200
#define AC97_PR2 0x0400
#define AC97_PR3 0x0800
#define AC97_PR4 0x1000
#define AC97_RESERVED1 0x28
#define AC97_VENDOR_TEST 0x5A
#define AC97_CLOCK_DELAY 0x5C
#define AC97_LINEOUT_MUX_SEL 0x0001
#define AC97_MONO_MUX_SEL 0x0002
#define AC97_CLOCK_DELAY_SEL 0x1F
#define AC97_DAC_CDS_SHIFT 6
#define AC97_ADC_CDS_SHIFT 11
#define AC97_MULTI_CHANNEL_SEL 0x74
/*#define AC97_VENDOR_ID1 0x7C
#define AC97_VENDOR_ID2 0x7E*/
/*
* ASSP control regs
*/
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment