Skip to content

L
linux
Commit e19f970b authored by Bjorn Helgaas's avatar Bjorn Helgaas Committed by David Mosberger
Browse files
Options

[PATCH] Add support for HP zx1 systems.

parent 5dbc562f
Hide whitespace changes
Inline Side-by-side
Showing with 2489 additions and 15 deletions
arch/ia64/Makefile
View file @ e19f970b
...@@ -33,16 +33,11 @@ ifeq ($(CONFIG_ITANIUM_BSTEP_SPECIFIC),y) ...@@ -33,16 +33,11 @@ ifeq ($(CONFIG_ITANIUM_BSTEP_SPECIFIC),y)
endif endif
ifdef CONFIG_IA64_GENERIC ifdef CONFIG_IA64_GENERIC
CORE_FILES := arch/$(ARCH)/hp/hp.a \ CORE_FILES := arch/$(ARCH)/hp/hp.o \
arch/$(ARCH)/sn/sn.o \ arch/$(ARCH)/dig/dig.a \
arch/$(ARCH)/dig/dig.a \
arch/$(ARCH)/sn/io/sgiio.o \
$(CORE_FILES) $(CORE_FILES)
SUBDIRS := arch/$(ARCH)/hp \ SUBDIRS := arch/$(ARCH)/hp \
arch/$(ARCH)/sn/sn1 \
arch/$(ARCH)/sn \
arch/$(ARCH)/dig \ arch/$(ARCH)/dig \
arch/$(ARCH)/sn/io \
$(SUBDIRS) $(SUBDIRS)
else # !GENERIC else # !GENERIC
...@@ -50,7 +45,16 @@ else # !GENERIC ...@@ -50,7 +45,16 @@ else # !GENERIC
ifdef CONFIG_IA64_HP_SIM ifdef CONFIG_IA64_HP_SIM
SUBDIRS := arch/$(ARCH)/hp \ SUBDIRS := arch/$(ARCH)/hp \
$(SUBDIRS) $(SUBDIRS)
CORE_FILES := arch/$(ARCH)/hp/hp.a \ CORE_FILES := arch/$(ARCH)/hp/hp.o \
$(CORE_FILES)
endif
ifdef CONFIG_IA64_HP_ZX1
SUBDIRS := arch/$(ARCH)/hp \
arch/$(ARCH)/dig \
$(SUBDIRS)
CORE_FILES := arch/$(ARCH)/hp/hp.o \
arch/$(ARCH)/dig/dig.a \
$(CORE_FILES) $(CORE_FILES)
endif endif
......
arch/ia64/config.in
View file @ e19f970b
...@@ -22,6 +22,7 @@ choice 'IA-64 system type' \ ...@@ -22,6 +22,7 @@ choice 'IA-64 system type' \
"generic CONFIG_IA64_GENERIC \ "generic CONFIG_IA64_GENERIC \
DIG-compliant CONFIG_IA64_DIG \ DIG-compliant CONFIG_IA64_DIG \
HP-simulator CONFIG_IA64_HP_SIM \ HP-simulator CONFIG_IA64_HP_SIM \
HP-zx1 CONFIG_IA64_HP_ZX1 \
SGI-SN1 CONFIG_IA64_SGI_SN1 \ SGI-SN1 CONFIG_IA64_SGI_SN1 \
SGI-SN2 CONFIG_IA64_SGI_SN2" generic SGI-SN2 CONFIG_IA64_SGI_SN2" generic
...@@ -56,7 +57,7 @@ if [ "$CONFIG_MCKINLEY" = "y" ]; then ...@@ -56,7 +57,7 @@ if [ "$CONFIG_MCKINLEY" = "y" ]; then
fi fi
fi fi
if [ "$CONFIG_IA64_DIG" = "y" ]; then if [ "$CONFIG_IA64_GENERIC" = "y" ] || [ "$CONFIG_IA64_DIG" = "y" ] || [ "$CONFIG_IA64_HP_ZX1" = "y" ]; then
bool ' Enable IA-64 Machine Check Abort' CONFIG_IA64_MCA bool ' Enable IA-64 Machine Check Abort' CONFIG_IA64_MCA
define_bool CONFIG_PM y define_bool CONFIG_PM y
fi fi
......
arch/ia64/dig/setup.c
View file @ e19f970b
...@@ -35,8 +35,6 @@ ...@@ -35,8 +35,6 @@
char drive_info[4*16]; char drive_info[4*16];
extern int pcat_compat; extern int pcat_compat;
unsigned char aux_device_present = 0xaa; /* XXX remove this when legacy I/O is gone */
void __init void __init
dig_setup (char **cmdline_p) dig_setup (char **cmdline_p)
{ {
......
arch/ia64/hp/common/Makefile
View file @ e19f970b
...@@ -12,3 +12,17 @@ export-objs := sba_iommu.o ...@@ -12,3 +12,17 @@ export-objs := sba_iommu.o
obj-y := sba_iommu.o obj-y := sba_iommu.o
include $(TOPDIR)/Rules.make include $(TOPDIR)/Rules.make
#
# ia64/platform/hp/common/Makefile
#
# Copyright (C) 2002 Hewlett Packard
# Copyright (C) Alex Williamson (alex_williamson@hp.com)
#
O_TARGET := common.o
export-objs := sba_iommu.o
obj-y := sba_iommu.o
include $(TOPDIR)/Rules.make
arch/ia64/hp/common/sba_iommu.c
View file @ e19f970b
...@@ -1848,3 +1848,1853 @@ EXPORT_SYMBOL(sba_unmap_sg); ...@@ -1848,3 +1848,1853 @@ EXPORT_SYMBOL(sba_unmap_sg);
EXPORT_SYMBOL(sba_dma_address); EXPORT_SYMBOL(sba_dma_address);
EXPORT_SYMBOL(sba_alloc_consistent); EXPORT_SYMBOL(sba_alloc_consistent);
EXPORT_SYMBOL(sba_free_consistent); EXPORT_SYMBOL(sba_free_consistent);
/*
** IA64 System Bus Adapter (SBA) I/O MMU manager
**
** (c) Copyright 2002 Alex Williamson
** (c) Copyright 2002 Hewlett-Packard Company
**
** Portions (c) 2000 Grant Grundler (from parisc I/O MMU code)
** Portions (c) 1999 Dave S. Miller (from sparc64 I/O MMU code)
**
** This program is free software; you can redistribute it and/or modify
** it under the terms of the GNU General Public License as published by
** the Free Software Foundation; either version 2 of the License, or
** (at your option) any later version.
**
**
** This module initializes the IOC (I/O Controller) found on HP
** McKinley machines and their successors.
**
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/proc_fs.h>
#include <asm/delay.h> /* ia64_get_itc() */
#include <asm/io.h>
#include <asm/page.h> /* PAGE_OFFSET */
#include <asm/efi.h>
#define DRIVER_NAME "SBA"
#ifndef CONFIG_IA64_HP_PROTO
#define ALLOW_IOV_BYPASS
#endif
#define ENABLE_MARK_CLEAN
/*
** The number of debug flags is a clue - this code is fragile.
*/
#undef DEBUG_SBA_INIT
#undef DEBUG_SBA_RUN
#undef DEBUG_SBA_RUN_SG
#undef DEBUG_SBA_RESOURCE
#undef ASSERT_PDIR_SANITY
#undef DEBUG_LARGE_SG_ENTRIES
#undef DEBUG_BYPASS
#define SBA_INLINE __inline__
/* #define SBA_INLINE */
#ifdef DEBUG_SBA_INIT
#define DBG_INIT(x...) printk(x)
#else
#define DBG_INIT(x...)
#endif
#ifdef DEBUG_SBA_RUN
#define DBG_RUN(x...) printk(x)
#else
#define DBG_RUN(x...)
#endif
#ifdef DEBUG_SBA_RUN_SG
#define DBG_RUN_SG(x...) printk(x)
#else
#define DBG_RUN_SG(x...)
#endif
#ifdef DEBUG_SBA_RESOURCE
#define DBG_RES(x...) printk(x)
#else
#define DBG_RES(x...)
#endif
#ifdef DEBUG_BYPASS
#define DBG_BYPASS(x...) printk(x)
#else
#define DBG_BYPASS(x...)
#endif
#ifdef ASSERT_PDIR_SANITY
#define ASSERT(expr) \
if(!(expr)) { \
printk( "\n" __FILE__ ":%d: Assertion " #expr " failed!\n",__LINE__); \
panic(#expr); \
}
#else
#define ASSERT(expr)
#endif
#define KB(x) ((x) * 1024)
#define MB(x) (KB (KB (x)))
#define GB(x) (MB (KB (x)))
/*
** The number of pdir entries to "free" before issueing
** a read to PCOM register to flush out PCOM writes.
** Interacts with allocation granularity (ie 4 or 8 entries
** allocated and free'd/purged at a time might make this
** less interesting).
*/
#define DELAYED_RESOURCE_CNT 16
#define DEFAULT_DMA_HINT_REG 0
#define ZX1_FUNC_ID_VALUE ((PCI_DEVICE_ID_HP_ZX1_SBA << 16) | PCI_VENDOR_ID_HP)
#define ZX1_MC_ID ((PCI_DEVICE_ID_HP_ZX1_MC << 16) | PCI_VENDOR_ID_HP)
#define SBA_FUNC_ID 0x0000 /* function id */
#define SBA_FCLASS 0x0008 /* function class, bist, header, rev... */
#define SBA_FUNC_SIZE 0x10000 /* SBA configuration function reg set */
unsigned int __initdata zx1_func_offsets[] = {0x1000, 0x4000, 0x8000,
0x9000, 0xa000, -1};
#define SBA_IOC_OFFSET 0x1000
#define MAX_IOC 1 /* we only have 1 for now*/
#define IOC_IBASE 0x300 /* IO TLB */
#define IOC_IMASK 0x308
#define IOC_PCOM 0x310
#define IOC_TCNFG 0x318
#define IOC_PDIR_BASE 0x320
#define IOC_IOVA_SPACE_BASE 0x40000000 /* IOVA ranges start at 1GB */
/*
** IOC supports 4/8/16/64KB page sizes (see TCNFG register)
** It's safer (avoid memory corruption) to keep DMA page mappings
** equivalently sized to VM PAGE_SIZE.
**
** We really can't avoid generating a new mapping for each
** page since the Virtual Coherence Index has to be generated
** and updated for each page.
**
** IOVP_SIZE could only be greater than PAGE_SIZE if we are
** confident the drivers really only touch the next physical
** page iff that driver instance owns it.
*/
#define IOVP_SIZE PAGE_SIZE
#define IOVP_SHIFT PAGE_SHIFT
#define IOVP_MASK PAGE_MASK
struct ioc {
unsigned long ioc_hpa; /* I/O MMU base address */
char *res_map; /* resource map, bit == pdir entry */
u64 *pdir_base; /* physical base address */
unsigned long ibase; /* pdir IOV Space base */
unsigned long imask; /* pdir IOV Space mask */
unsigned long *res_hint; /* next avail IOVP - circular search */
spinlock_t res_lock;
unsigned long hint_mask_pdir; /* bits used for DMA hints */
unsigned int res_bitshift; /* from the RIGHT! */
unsigned int res_size; /* size of resource map in bytes */
unsigned int hint_shift_pdir;
unsigned long dma_mask;
#if DELAYED_RESOURCE_CNT > 0
int saved_cnt;
struct sba_dma_pair {
dma_addr_t iova;
size_t size;
} saved[DELAYED_RESOURCE_CNT];
#endif
#ifdef CONFIG_PROC_FS
#define SBA_SEARCH_SAMPLE 0x100
unsigned long avg_search[SBA_SEARCH_SAMPLE];
unsigned long avg_idx; /* current index into avg_search */
unsigned long used_pages;
unsigned long msingle_calls;
unsigned long msingle_pages;
unsigned long msg_calls;
unsigned long msg_pages;
unsigned long usingle_calls;
unsigned long usingle_pages;
unsigned long usg_calls;
unsigned long usg_pages;
#ifdef ALLOW_IOV_BYPASS
unsigned long msingle_bypass;
unsigned long usingle_bypass;
unsigned long msg_bypass;
#endif
#endif
/* STUFF We don't need in performance path */
unsigned int pdir_size; /* in bytes, determined by IOV Space size */
};
struct sba_device {
struct sba_device *next; /* list of SBA's in system */
const char *name;
unsigned long sba_hpa; /* base address */
spinlock_t sba_lock;
unsigned int flags; /* state/functionality enabled */
unsigned int hw_rev; /* HW revision of chip */
unsigned int num_ioc; /* number of on-board IOC's */
struct ioc ioc[MAX_IOC];
};
static struct sba_device *sba_list;
static int sba_count;
static int reserve_sba_gart = 1;
#define sba_sg_iova(sg) (sg->address)
#define sba_sg_len(sg) (sg->length)
#define sba_sg_buffer(sg) (sg->orig_address)
/* REVISIT - fix me for multiple SBAs/IOCs */
#define GET_IOC(dev) (sba_list->ioc)
#define SBA_SET_AGP(sba_dev) (sba_dev->flags |= 0x1)
#define SBA_GET_AGP(sba_dev) (sba_dev->flags & 0x1)
/*
** DMA_CHUNK_SIZE is used by the SCSI mid-layer to break up
** (or rather not merge) DMA's into managable chunks.
** On parisc, this is more of the software/tuning constraint
** rather than the HW. I/O MMU allocation alogorithms can be
** faster with smaller size is (to some degree).
*/
#define DMA_CHUNK_SIZE (BITS_PER_LONG*PAGE_SIZE)
/* Looks nice and keeps the compiler happy */
#define SBA_DEV(d) ((struct sba_device *) (d))
#define ROUNDUP(x,y) ((x + ((y)-1)) & ~((y)-1))
/************************************
** SBA register read and write support
**
** BE WARNED: register writes are posted.
** (ie follow writes which must reach HW with a read)
**
*/
#define READ_REG(addr) __raw_readq(addr)
#define WRITE_REG(val, addr) __raw_writeq(val, addr)
#ifdef DEBUG_SBA_INIT
/**
* sba_dump_tlb - debugging only - print IOMMU operating parameters
* @hpa: base address of the IOMMU
*
* Print the size/location of the IO MMU PDIR.
*/
static void
sba_dump_tlb(char *hpa)
{
DBG_INIT("IO TLB at 0x%p\n", (void *)hpa);
DBG_INIT("IOC_IBASE : %016lx\n", READ_REG(hpa+IOC_IBASE));
DBG_INIT("IOC_IMASK : %016lx\n", READ_REG(hpa+IOC_IMASK));
DBG_INIT("IOC_TCNFG : %016lx\n", READ_REG(hpa+IOC_TCNFG));
DBG_INIT("IOC_PDIR_BASE: %016lx\n", READ_REG(hpa+IOC_PDIR_BASE));
DBG_INIT("\n");
}
#endif
#ifdef ASSERT_PDIR_SANITY
/**
* sba_dump_pdir_entry - debugging only - print one IOMMU PDIR entry
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @msg: text to print ont the output line.
* @pide: pdir index.
*
* Print one entry of the IO MMU PDIR in human readable form.
*/
static void
sba_dump_pdir_entry(struct ioc *ioc, char *msg, uint pide)
{
/* start printing from lowest pde in rval */
u64 *ptr = &(ioc->pdir_base[pide & ~(BITS_PER_LONG - 1)]);
unsigned long *rptr = (unsigned long *) &(ioc->res_map[(pide >>3) & ~(sizeof(unsigned long) - 1)]);
uint rcnt;
/* printk(KERN_DEBUG "SBA: %s rp %p bit %d rval 0x%lx\n", */
printk("SBA: %s rp %p bit %d rval 0x%lx\n",
msg, rptr, pide & (BITS_PER_LONG - 1), *rptr);
rcnt = 0;
while (rcnt < BITS_PER_LONG) {
printk("%s %2d %p %016Lx\n",
(rcnt == (pide & (BITS_PER_LONG - 1)))
? " -->" : " ",
rcnt, ptr, *ptr );
rcnt++;
ptr++;
}
printk("%s", msg);
}
/**
* sba_check_pdir - debugging only - consistency checker
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @msg: text to print ont the output line.
*
* Verify the resource map and pdir state is consistent
*/
static int
sba_check_pdir(struct ioc *ioc, char *msg)
{
u64 *rptr_end = (u64 *) &(ioc->res_map[ioc->res_size]);
u64 *rptr = (u64 *) ioc->res_map; /* resource map ptr */
u64 *pptr = ioc->pdir_base; /* pdir ptr */
uint pide = 0;
while (rptr < rptr_end) {
u64 rval;
int rcnt; /* number of bits we might check */
rval = *rptr;
rcnt = 64;
while (rcnt) {
/* Get last byte and highest bit from that */
u32 pde = ((u32)((*pptr >> (63)) & 0x1));
if ((rval & 0x1) ^ pde)
{
/*
** BUMMER! -- res_map != pdir --
** Dump rval and matching pdir entries
*/
sba_dump_pdir_entry(ioc, msg, pide);
return(1);
}
rcnt--;
rval >>= 1; /* try the next bit */
pptr++;
pide++;
}
rptr++; /* look at next word of res_map */
}
/* It'd be nice if we always got here :^) */
return 0;
}
/**
* sba_dump_sg - debugging only - print Scatter-Gather list
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @startsg: head of the SG list
* @nents: number of entries in SG list
*
* print the SG list so we can verify it's correct by hand.
*/
static void
sba_dump_sg( struct ioc *ioc, struct scatterlist *startsg, int nents)
{
while (nents-- > 0) {
printk(" %d : %08lx/%05x %p\n",
nents,
(unsigned long) sba_sg_iova(startsg),
sba_sg_len(startsg),
sba_sg_buffer(startsg));
startsg++;
}
}
static void
sba_check_sg( struct ioc *ioc, struct scatterlist *startsg, int nents)
{
struct scatterlist *the_sg = startsg;
int the_nents = nents;
while (the_nents-- > 0) {
if (sba_sg_buffer(the_sg) == 0x0UL)
sba_dump_sg(NULL, startsg, nents);
the_sg++;
}
}
#endif /* ASSERT_PDIR_SANITY */
/**************************************************************
*
* I/O Pdir Resource Management
*
* Bits set in the resource map are in use.
* Each bit can represent a number of pages.
* LSbs represent lower addresses (IOVA's).
*
***************************************************************/
#define PAGES_PER_RANGE 1 /* could increase this to 4 or 8 if needed */
/* Convert from IOVP to IOVA and vice versa. */
#define SBA_IOVA(ioc,iovp,offset,hint_reg) ((ioc->ibase) | (iovp) | (offset) | ((hint_reg)<<(ioc->hint_shift_pdir)))
#define SBA_IOVP(ioc,iova) (((iova) & ioc->hint_mask_pdir) & ~(ioc->ibase))
/* FIXME : review these macros to verify correctness and usage */
#define PDIR_INDEX(iovp) ((iovp)>>IOVP_SHIFT)
#define RESMAP_MASK(n) ~(~0UL << (n))
#define RESMAP_IDX_MASK (sizeof(unsigned long) - 1)
/**
* sba_search_bitmap - find free space in IO PDIR resource bitmap
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @bits_wanted: number of entries we need.
*
* Find consecutive free bits in resource bitmap.
* Each bit represents one entry in the IO Pdir.
* Cool perf optimization: search for log2(size) bits at a time.
*/
static SBA_INLINE unsigned long
sba_search_bitmap(struct ioc *ioc, unsigned long bits_wanted)
{
unsigned long *res_ptr = ioc->res_hint;
unsigned long *res_end = (unsigned long *) &(ioc->res_map[ioc->res_size]);
unsigned long pide = ~0UL;
ASSERT(((unsigned long) ioc->res_hint & (sizeof(unsigned long) - 1UL)) == 0);
ASSERT(res_ptr < res_end);
if (bits_wanted > (BITS_PER_LONG/2)) {
/* Search word at a time - no mask needed */
for(; res_ptr < res_end; ++res_ptr) {
if (*res_ptr == 0) {
*res_ptr = RESMAP_MASK(bits_wanted);
pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
pide <<= 3; /* convert to bit address */
break;
}
}
/* point to the next word on next pass */
res_ptr++;
ioc->res_bitshift = 0;
} else {
/*
** Search the resource bit map on well-aligned values.
** "o" is the alignment.
** We need the alignment to invalidate I/O TLB using
** SBA HW features in the unmap path.
*/
unsigned long o = 1 << get_order(bits_wanted << PAGE_SHIFT);
uint bitshiftcnt = ROUNDUP(ioc->res_bitshift, o);
unsigned long mask;
if (bitshiftcnt >= BITS_PER_LONG) {
bitshiftcnt = 0;
res_ptr++;
}
mask = RESMAP_MASK(bits_wanted) << bitshiftcnt;
DBG_RES("%s() o %ld %p", __FUNCTION__, o, res_ptr);
while(res_ptr < res_end)
{
DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr);
ASSERT(0 != mask);
if(0 == ((*res_ptr) & mask)) {
*res_ptr |= mask; /* mark resources busy! */
pide = ((unsigned long)res_ptr - (unsigned long)ioc->res_map);
pide <<= 3; /* convert to bit address */
pide += bitshiftcnt;
break;
}
mask <<= o;
bitshiftcnt += o;
if (0 == mask) {
mask = RESMAP_MASK(bits_wanted);
bitshiftcnt=0;
res_ptr++;
}
}
/* look in the same word on the next pass */
ioc->res_bitshift = bitshiftcnt + bits_wanted;
}
/* wrapped ? */
if (res_end <= res_ptr) {
ioc->res_hint = (unsigned long *) ioc->res_map;
ioc->res_bitshift = 0;
} else {
ioc->res_hint = res_ptr;
}
return (pide);
}
/**
* sba_alloc_range - find free bits and mark them in IO PDIR resource bitmap
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @size: number of bytes to create a mapping for
*
* Given a size, find consecutive unmarked and then mark those bits in the
* resource bit map.
*/
static int
sba_alloc_range(struct ioc *ioc, size_t size)
{
unsigned int pages_needed = size >> IOVP_SHIFT;
#ifdef CONFIG_PROC_FS
unsigned long itc_start = ia64_get_itc();
#endif
unsigned long pide;
ASSERT(pages_needed);
ASSERT((pages_needed * IOVP_SIZE) <= DMA_CHUNK_SIZE);
ASSERT(pages_needed <= BITS_PER_LONG);
ASSERT(0 == (size & ~IOVP_MASK));
/*
** "seek and ye shall find"...praying never hurts either...
*/
pide = sba_search_bitmap(ioc, pages_needed);
if (pide >= (ioc->res_size << 3)) {
pide = sba_search_bitmap(ioc, pages_needed);
if (pide >= (ioc->res_size << 3))
panic(__FILE__ ": I/O MMU @ %lx is out of mapping resources\n", ioc->ioc_hpa);
}
#ifdef ASSERT_PDIR_SANITY
/* verify the first enable bit is clear */
if(0x00 != ((u8 *) ioc->pdir_base)[pide*sizeof(u64) + 7]) {
sba_dump_pdir_entry(ioc, "sba_search_bitmap() botched it?", pide);
}
#endif
DBG_RES("%s(%x) %d -> %lx hint %x/%x\n",
__FUNCTION__, size, pages_needed, pide,
(uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map),
ioc->res_bitshift );
#ifdef CONFIG_PROC_FS
{
unsigned long itc_end = ia64_get_itc();
unsigned long tmp = itc_end - itc_start;
/* check for roll over */
itc_start = (itc_end < itc_start) ? -(tmp) : (tmp);
}
ioc->avg_search[ioc->avg_idx++] = itc_start;
ioc->avg_idx &= SBA_SEARCH_SAMPLE - 1;
ioc->used_pages += pages_needed;
#endif
return (pide);
}
/**
* sba_free_range - unmark bits in IO PDIR resource bitmap
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @iova: IO virtual address which was previously allocated.
* @size: number of bytes to create a mapping for
*
* clear bits in the ioc's resource map
*/
static SBA_INLINE void
sba_free_range(struct ioc *ioc, dma_addr_t iova, size_t size)
{
unsigned long iovp = SBA_IOVP(ioc, iova);
unsigned int pide = PDIR_INDEX(iovp);
unsigned int ridx = pide >> 3; /* convert bit to byte address */
unsigned long *res_ptr = (unsigned long *) &((ioc)->res_map[ridx & ~RESMAP_IDX_MASK]);
int bits_not_wanted = size >> IOVP_SHIFT;
/* 3-bits "bit" address plus 2 (or 3) bits for "byte" == bit in word */
unsigned long m = RESMAP_MASK(bits_not_wanted) << (pide & (BITS_PER_LONG - 1));
DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n",
__FUNCTION__, (uint) iova, size,
bits_not_wanted, m, pide, res_ptr, *res_ptr);
#ifdef CONFIG_PROC_FS
ioc->used_pages -= bits_not_wanted;
#endif
ASSERT(m != 0);
ASSERT(bits_not_wanted);
ASSERT((bits_not_wanted * IOVP_SIZE) <= DMA_CHUNK_SIZE);
ASSERT(bits_not_wanted <= BITS_PER_LONG);
ASSERT((*res_ptr & m) == m); /* verify same bits are set */
*res_ptr &= ~m;
}
/**************************************************************
*
* "Dynamic DMA Mapping" support (aka "Coherent I/O")
*
***************************************************************/
#define SBA_DMA_HINT(ioc, val) ((val) << (ioc)->hint_shift_pdir)
/**
* sba_io_pdir_entry - fill in one IO PDIR entry
* @pdir_ptr: pointer to IO PDIR entry
* @vba: Virtual CPU address of buffer to map
*
* SBA Mapping Routine
*
* Given a virtual address (vba, arg1) sba_io_pdir_entry()
* loads the I/O PDIR entry pointed to by pdir_ptr (arg0).
* Each IO Pdir entry consists of 8 bytes as shown below
* (LSB == bit 0):
*
* 63 40 11 7 0
* +-+---------------------+----------------------------------+----+--------+
* |V| U | PPN[39:12] | U | FF |
* +-+---------------------+----------------------------------+----+--------+
*
* V == Valid Bit
* U == Unused
* PPN == Physical Page Number
*
* The physical address fields are filled with the results of virt_to_phys()
* on the vba.
*/
#if 1
#define sba_io_pdir_entry(pdir_ptr, vba) *pdir_ptr = ((vba & ~0xE000000000000FFFULL) | 0x80000000000000FFULL)
#else
void SBA_INLINE
sba_io_pdir_entry(u64 *pdir_ptr, unsigned long vba)
{
*pdir_ptr = ((vba & ~0xE000000000000FFFULL) | 0x80000000000000FFULL);
}
#endif
#ifdef ENABLE_MARK_CLEAN
/**
* Since DMA is i-cache coherent, any (complete) pages that were written via
* DMA can be marked as "clean" so that update_mmu_cache() doesn't have to
* flush them when they get mapped into an executable vm-area.
*/
static void
mark_clean (void *addr, size_t size)
{
unsigned long pg_addr, end;
pg_addr = PAGE_ALIGN((unsigned long) addr);
end = (unsigned long) addr + size;
while (pg_addr + PAGE_SIZE <= end) {
struct page *page = virt_to_page(pg_addr);
set_bit(PG_arch_1, &page->flags);
pg_addr += PAGE_SIZE;
}
}
#endif
/**
* sba_mark_invalid - invalidate one or more IO PDIR entries
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @iova: IO Virtual Address mapped earlier
* @byte_cnt: number of bytes this mapping covers.
*
* Marking the IO PDIR entry(ies) as Invalid and invalidate
* corresponding IO TLB entry. The PCOM (Purge Command Register)
* is to purge stale entries in the IO TLB when unmapping entries.
*
* The PCOM register supports purging of multiple pages, with a minium
* of 1 page and a maximum of 2GB. Hardware requires the address be
* aligned to the size of the range being purged. The size of the range
* must be a power of 2. The "Cool perf optimization" in the
* allocation routine helps keep that true.
*/
static SBA_INLINE void
sba_mark_invalid(struct ioc *ioc, dma_addr_t iova, size_t byte_cnt)
{
u32 iovp = (u32) SBA_IOVP(ioc,iova);
int off = PDIR_INDEX(iovp);
/* Must be non-zero and rounded up */
ASSERT(byte_cnt > 0);
ASSERT(0 == (byte_cnt & ~IOVP_MASK));
#ifdef ASSERT_PDIR_SANITY
/* Assert first pdir entry is set */
if (!(ioc->pdir_base[off] >> 60)) {
sba_dump_pdir_entry(ioc,"sba_mark_invalid()", PDIR_INDEX(iovp));
}
#endif
if (byte_cnt <= IOVP_SIZE)
{
ASSERT(off < ioc->pdir_size);
iovp |= IOVP_SHIFT; /* set "size" field for PCOM */
/*
** clear I/O PDIR entry "valid" bit
** Do NOT clear the rest - save it for debugging.
** We should only clear bits that have previously
** been enabled.
*/
ioc->pdir_base[off] &= ~(0x80000000000000FFULL);
} else {
u32 t = get_order(byte_cnt) + PAGE_SHIFT;
iovp |= t;
ASSERT(t <= 31); /* 2GB! Max value of "size" field */
do {
/* verify this pdir entry is enabled */
ASSERT(ioc->pdir_base[off] >> 63);
/* clear I/O Pdir entry "valid" bit first */
ioc->pdir_base[off] &= ~(0x80000000000000FFULL);
off++;
byte_cnt -= IOVP_SIZE;
} while (byte_cnt > 0);
}
WRITE_REG(iovp, ioc->ioc_hpa+IOC_PCOM);
}
/**
* sba_map_single - map one buffer and return IOVA for DMA
* @dev: instance of PCI owned by the driver that's asking.
* @addr: driver buffer to map.
* @size: number of bytes to map in driver buffer.
* @direction: R/W or both.
*
* See Documentation/DMA-mapping.txt
*/
dma_addr_t
sba_map_single(struct pci_dev *dev, void *addr, size_t size, int direction)
{
struct ioc *ioc;
unsigned long flags;
dma_addr_t iovp;
dma_addr_t offset;
u64 *pdir_start;
int pide;
#ifdef ALLOW_IOV_BYPASS
unsigned long pci_addr = virt_to_phys(addr);
#endif
ioc = GET_IOC(dev);
ASSERT(ioc);
#ifdef ALLOW_IOV_BYPASS
/*
** Check if the PCI device can DMA to ptr... if so, just return ptr
*/
if ((pci_addr & ~dev->dma_mask) == 0) {
/*
** Device is bit capable of DMA'ing to the buffer...
** just return the PCI address of ptr
*/
#ifdef CONFIG_PROC_FS
spin_lock_irqsave(&ioc->res_lock, flags);
ioc->msingle_bypass++;
spin_unlock_irqrestore(&ioc->res_lock, flags);
#endif
DBG_BYPASS("sba_map_single() bypass mask/addr: 0x%lx/0x%lx\n",
dev->dma_mask, pci_addr);
return pci_addr;
}
#endif
ASSERT(size > 0);
ASSERT(size <= DMA_CHUNK_SIZE);
/* save offset bits */
offset = ((dma_addr_t) (long) addr) & ~IOVP_MASK;
/* round up to nearest IOVP_SIZE */
size = (size + offset + ~IOVP_MASK) & IOVP_MASK;
spin_lock_irqsave(&ioc->res_lock, flags);
#ifdef ASSERT_PDIR_SANITY
if (sba_check_pdir(ioc,"Check before sba_map_single()"))
panic("Sanity check failed");
#endif
#ifdef CONFIG_PROC_FS
ioc->msingle_calls++;
ioc->msingle_pages += size >> IOVP_SHIFT;
#endif
pide = sba_alloc_range(ioc, size);
iovp = (dma_addr_t) pide << IOVP_SHIFT;
DBG_RUN("%s() 0x%p -> 0x%lx\n",
__FUNCTION__, addr, (long) iovp | offset);
pdir_start = &(ioc->pdir_base[pide]);
while (size > 0) {
ASSERT(((u8 *)pdir_start)[7] == 0); /* verify availability */
sba_io_pdir_entry(pdir_start, (unsigned long) addr);
DBG_RUN(" pdir 0x%p %lx\n", pdir_start, *pdir_start);
addr += IOVP_SIZE;
size -= IOVP_SIZE;
pdir_start++;
}
/* form complete address */
#ifdef ASSERT_PDIR_SANITY
sba_check_pdir(ioc,"Check after sba_map_single()");
#endif
spin_unlock_irqrestore(&ioc->res_lock, flags);
return SBA_IOVA(ioc, iovp, offset, DEFAULT_DMA_HINT_REG);
}
/**
* sba_unmap_single - unmap one IOVA and free resources
* @dev: instance of PCI owned by the driver that's asking.
* @iova: IOVA of driver buffer previously mapped.
* @size: number of bytes mapped in driver buffer.
* @direction: R/W or both.
*
* See Documentation/DMA-mapping.txt
*/
void sba_unmap_single(struct pci_dev *dev, dma_addr_t iova, size_t size,
int direction)
{
struct ioc *ioc;
#if DELAYED_RESOURCE_CNT > 0
struct sba_dma_pair *d;
#endif
unsigned long flags;
dma_addr_t offset;
ioc = GET_IOC(dev);
ASSERT(ioc);
#ifdef ALLOW_IOV_BYPASS
if ((iova & ioc->imask) != ioc->ibase) {
/*
** Address does not fall w/in IOVA, must be bypassing
*/
#ifdef CONFIG_PROC_FS
spin_lock_irqsave(&ioc->res_lock, flags);
ioc->usingle_bypass++;
spin_unlock_irqrestore(&ioc->res_lock, flags);
#endif
DBG_BYPASS("sba_unmap_single() bypass addr: 0x%lx\n", iova);
#ifdef ENABLE_MARK_CLEAN
if (direction == PCI_DMA_FROMDEVICE) {
mark_clean(phys_to_virt(iova), size);
}
#endif
return;
}
#endif
offset = iova & ~IOVP_MASK;
DBG_RUN("%s() iovp 0x%lx/%x\n",
__FUNCTION__, (long) iova, size);
iova ^= offset; /* clear offset bits */
size += offset;
size = ROUNDUP(size, IOVP_SIZE);
spin_lock_irqsave(&ioc->res_lock, flags);
#ifdef CONFIG_PROC_FS
ioc->usingle_calls++;
ioc->usingle_pages += size >> IOVP_SHIFT;
#endif
#if DELAYED_RESOURCE_CNT > 0
d = &(ioc->saved[ioc->saved_cnt]);
d->iova = iova;
d->size = size;
if (++(ioc->saved_cnt) >= DELAYED_RESOURCE_CNT) {
int cnt = ioc->saved_cnt;
while (cnt--) {
sba_mark_invalid(ioc, d->iova, d->size);
sba_free_range(ioc, d->iova, d->size);
d--;
}
ioc->saved_cnt = 0;
READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
}
#else /* DELAYED_RESOURCE_CNT == 0 */
sba_mark_invalid(ioc, iova, size);
sba_free_range(ioc, iova, size);
READ_REG(ioc->ioc_hpa+IOC_PCOM); /* flush purges */
#endif /* DELAYED_RESOURCE_CNT == 0 */
#ifdef ENABLE_MARK_CLEAN
if (direction == PCI_DMA_FROMDEVICE) {
u32 iovp = (u32) SBA_IOVP(ioc,iova);
int off = PDIR_INDEX(iovp);
void *addr;
if (size <= IOVP_SIZE) {
addr = phys_to_virt(ioc->pdir_base[off] &
~0xE000000000000FFFULL);
mark_clean(addr, size);
} else {
size_t byte_cnt = size;
do {
addr = phys_to_virt(ioc->pdir_base[off] &
~0xE000000000000FFFULL);
mark_clean(addr, min(byte_cnt, IOVP_SIZE));
off++;
byte_cnt -= IOVP_SIZE;
} while (byte_cnt > 0);
}
}
#endif
spin_unlock_irqrestore(&ioc->res_lock, flags);
/* XXX REVISIT for 2.5 Linux - need syncdma for zero-copy support.
** For Astro based systems this isn't a big deal WRT performance.
** As long as 2.4 kernels copyin/copyout data from/to userspace,
** we don't need the syncdma. The issue here is I/O MMU cachelines
** are *not* coherent in all cases. May be hwrev dependent.
** Need to investigate more.
asm volatile("syncdma");
*/
}
/**
* sba_alloc_consistent - allocate/map shared mem for DMA
* @hwdev: instance of PCI owned by the driver that's asking.
* @size: number of bytes mapped in driver buffer.
* @dma_handle: IOVA of new buffer.
*
* See Documentation/DMA-mapping.txt
*/
void *
sba_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t *dma_handle)
{
void *ret;
if (!hwdev) {
/* only support PCI */
*dma_handle = 0;
return 0;
}
ret = (void *) __get_free_pages(GFP_ATOMIC, get_order(size));
if (ret) {
memset(ret, 0, size);
*dma_handle = sba_map_single(hwdev, ret, size, 0);
}
return ret;
}
/**
* sba_free_consistent - free/unmap shared mem for DMA
* @hwdev: instance of PCI owned by the driver that's asking.
* @size: number of bytes mapped in driver buffer.
* @vaddr: virtual address IOVA of "consistent" buffer.
* @dma_handler: IO virtual address of "consistent" buffer.
*
* See Documentation/DMA-mapping.txt
*/
void sba_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr,
dma_addr_t dma_handle)
{
sba_unmap_single(hwdev, dma_handle, size, 0);
free_pages((unsigned long) vaddr, get_order(size));
}
/*
** Since 0 is a valid pdir_base index value, can't use that
** to determine if a value is valid or not. Use a flag to indicate
** the SG list entry contains a valid pdir index.
*/
#define PIDE_FLAG 0x1UL
#ifdef DEBUG_LARGE_SG_ENTRIES
int dump_run_sg = 0;
#endif
/**
* sba_fill_pdir - write allocated SG entries into IO PDIR
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @startsg: list of IOVA/size pairs
* @nents: number of entries in startsg list
*
* Take preprocessed SG list and write corresponding entries
* in the IO PDIR.
*/
static SBA_INLINE int
sba_fill_pdir(
struct ioc *ioc,
struct scatterlist *startsg,
int nents)
{
struct scatterlist *dma_sg = startsg; /* pointer to current DMA */
int n_mappings = 0;
u64 *pdirp = 0;
unsigned long dma_offset = 0;
dma_sg--;
while (nents-- > 0) {
int cnt = sba_sg_len(startsg);
sba_sg_len(startsg) = 0;
#ifdef DEBUG_LARGE_SG_ENTRIES
if (dump_run_sg)
printk(" %2d : %08lx/%05x %p\n",
nents,
(unsigned long) sba_sg_iova(startsg), cnt,
sba_sg_buffer(startsg)
);
#else
DBG_RUN_SG(" %d : %08lx/%05x %p\n",
nents,
(unsigned long) sba_sg_iova(startsg), cnt,
sba_sg_buffer(startsg)
);
#endif
/*
** Look for the start of a new DMA stream
*/
if ((u64)sba_sg_iova(startsg) & PIDE_FLAG) {
u32 pide = (u64)sba_sg_iova(startsg) & ~PIDE_FLAG;
dma_offset = (unsigned long) pide & ~IOVP_MASK;
sba_sg_iova(startsg) = 0;
dma_sg++;
sba_sg_iova(dma_sg) = (char *)(pide | ioc->ibase);
pdirp = &(ioc->pdir_base[pide >> IOVP_SHIFT]);
n_mappings++;
}
/*
** Look for a VCONTIG chunk
*/
if (cnt) {
unsigned long vaddr = (unsigned long) sba_sg_buffer(startsg);
ASSERT(pdirp);
/* Since multiple Vcontig blocks could make up
** one DMA stream, *add* cnt to dma_len.
*/
sba_sg_len(dma_sg) += cnt;
cnt += dma_offset;
dma_offset=0; /* only want offset on first chunk */
cnt = ROUNDUP(cnt, IOVP_SIZE);
#ifdef CONFIG_PROC_FS
ioc->msg_pages += cnt >> IOVP_SHIFT;
#endif
do {
sba_io_pdir_entry(pdirp, vaddr);
vaddr += IOVP_SIZE;
cnt -= IOVP_SIZE;
pdirp++;
} while (cnt > 0);
}
startsg++;
}
#ifdef DEBUG_LARGE_SG_ENTRIES
dump_run_sg = 0;
#endif
return(n_mappings);
}
/*
** Two address ranges are DMA contiguous *iff* "end of prev" and
** "start of next" are both on a page boundry.
**
** (shift left is a quick trick to mask off upper bits)
*/
#define DMA_CONTIG(__X, __Y) \
(((((unsigned long) __X) | ((unsigned long) __Y)) << (BITS_PER_LONG - PAGE_SHIFT)) == 0UL)
/**
* sba_coalesce_chunks - preprocess the SG list
* @ioc: IO MMU structure which owns the pdir we are interested in.
* @startsg: list of IOVA/size pairs
* @nents: number of entries in startsg list
*
* First pass is to walk the SG list and determine where the breaks are
* in the DMA stream. Allocates PDIR entries but does not fill them.
* Returns the number of DMA chunks.
*
* Doing the fill seperate from the coalescing/allocation keeps the
* code simpler. Future enhancement could make one pass through
* the sglist do both.
*/
static SBA_INLINE int
sba_coalesce_chunks( struct ioc *ioc,
struct scatterlist *startsg,
int nents)
{
struct scatterlist *vcontig_sg; /* VCONTIG chunk head */
unsigned long vcontig_len; /* len of VCONTIG chunk */
unsigned long vcontig_end;
struct scatterlist *dma_sg; /* next DMA stream head */
unsigned long dma_offset, dma_len; /* start/len of DMA stream */
int n_mappings = 0;
while (nents > 0) {
unsigned long vaddr = (unsigned long) (startsg->address);
/*
** Prepare for first/next DMA stream
*/
dma_sg = vcontig_sg = startsg;
dma_len = vcontig_len = vcontig_end = sba_sg_len(startsg);
vcontig_end += vaddr;
dma_offset = vaddr & ~IOVP_MASK;
/* PARANOID: clear entries */
sba_sg_buffer(startsg) = sba_sg_iova(startsg);
sba_sg_iova(startsg) = 0;
sba_sg_len(startsg) = 0;
/*
** This loop terminates one iteration "early" since
** it's always looking one "ahead".
*/
while (--nents > 0) {
unsigned long vaddr; /* tmp */
startsg++;
/* catch brokenness in SCSI layer */
ASSERT(startsg->length <= DMA_CHUNK_SIZE);
/*
** First make sure current dma stream won't
** exceed DMA_CHUNK_SIZE if we coalesce the
** next entry.
*/
if (((dma_len + dma_offset + startsg->length + ~IOVP_MASK) & IOVP_MASK) > DMA_CHUNK_SIZE)
break;
/*
** Then look for virtually contiguous blocks.
**
** append the next transaction?
*/
vaddr = (unsigned long) sba_sg_iova(startsg);
if (vcontig_end == vaddr)
{
vcontig_len += sba_sg_len(startsg);
vcontig_end += sba_sg_len(startsg);
dma_len += sba_sg_len(startsg);
sba_sg_buffer(startsg) = (char *)vaddr;
sba_sg_iova(startsg) = 0;
sba_sg_len(startsg) = 0;
continue;
}
#ifdef DEBUG_LARGE_SG_ENTRIES
dump_run_sg = (vcontig_len > IOVP_SIZE);
#endif
/*
** Not virtually contigous.
** Terminate prev chunk.
** Start a new chunk.
**
** Once we start a new VCONTIG chunk, dma_offset
** can't change. And we need the offset from the first
** chunk - not the last one. Ergo Successive chunks
** must start on page boundaries and dove tail
** with it's predecessor.
*/
sba_sg_len(vcontig_sg) = vcontig_len;
vcontig_sg = startsg;
vcontig_len = sba_sg_len(startsg);
/*
** 3) do the entries end/start on page boundaries?
** Don't update vcontig_end until we've checked.
*/
if (DMA_CONTIG(vcontig_end, vaddr))
{
vcontig_end = vcontig_len + vaddr;
dma_len += vcontig_len;
sba_sg_buffer(startsg) = (char *)vaddr;
sba_sg_iova(startsg) = 0;
continue;
} else {
break;
}
}
/*
** End of DMA Stream
** Terminate last VCONTIG block.
** Allocate space for DMA stream.
*/
sba_sg_len(vcontig_sg) = vcontig_len;
dma_len = (dma_len + dma_offset + ~IOVP_MASK) & IOVP_MASK;
ASSERT(dma_len <= DMA_CHUNK_SIZE);
sba_sg_iova(dma_sg) = (char *) (PIDE_FLAG
| (sba_alloc_range(ioc, dma_len) << IOVP_SHIFT)
| dma_offset);
n_mappings++;
}
return n_mappings;
}
/**
* sba_map_sg - map Scatter/Gather list
* @dev: instance of PCI owned by the driver that's asking.
* @sglist: array of buffer/length pairs
* @nents: number of entries in list
* @direction: R/W or both.
*
* See Documentation/DMA-mapping.txt
*/
int sba_map_sg(struct pci_dev *dev, struct scatterlist *sglist, int nents,
int direction)
{
struct ioc *ioc;
int coalesced, filled = 0;
unsigned long flags;
#ifdef ALLOW_IOV_BYPASS
struct scatterlist *sg;
#endif
DBG_RUN_SG("%s() START %d entries\n", __FUNCTION__, nents);
ioc = GET_IOC(dev);
ASSERT(ioc);
#ifdef ALLOW_IOV_BYPASS
if (dev->dma_mask >= ioc->dma_mask) {
for (sg = sglist ; filled < nents ; filled++, sg++){
sba_sg_buffer(sg) = sba_sg_iova(sg);
sba_sg_iova(sg) = (char *)virt_to_phys(sba_sg_buffer(sg));
}
#ifdef CONFIG_PROC_FS
spin_lock_irqsave(&ioc->res_lock, flags);
ioc->msg_bypass++;
spin_unlock_irqrestore(&ioc->res_lock, flags);
#endif
return filled;
}
#endif
/* Fast path single entry scatterlists. */
if (nents == 1) {
sba_sg_buffer(sglist) = sba_sg_iova(sglist);
sba_sg_iova(sglist) = (char *)sba_map_single(dev,
sba_sg_buffer(sglist),
sba_sg_len(sglist), direction);
#ifdef CONFIG_PROC_FS
/*
** Should probably do some stats counting, but trying to
** be precise quickly starts wasting CPU time.
*/
#endif
return 1;
}
spin_lock_irqsave(&ioc->res_lock, flags);
#ifdef ASSERT_PDIR_SANITY
if (sba_check_pdir(ioc,"Check before sba_map_sg()"))
{
sba_dump_sg(ioc, sglist, nents);
panic("Check before sba_map_sg()");
}
#endif
#ifdef CONFIG_PROC_FS
ioc->msg_calls++;
#endif
/*
** First coalesce the chunks and allocate I/O pdir space
**
** If this is one DMA stream, we can properly map using the
** correct virtual address associated with each DMA page.
** w/o this association, we wouldn't have coherent DMA!
** Access to the virtual address is what forces a two pass algorithm.
*/
coalesced = sba_coalesce_chunks(ioc, sglist, nents);
/*
** Program the I/O Pdir
**
** map the virtual addresses to the I/O Pdir
** o dma_address will contain the pdir index
** o dma_len will contain the number of bytes to map
** o address contains the virtual address.
*/
filled = sba_fill_pdir(ioc, sglist, nents);
#ifdef ASSERT_PDIR_SANITY
if (sba_check_pdir(ioc,"Check after sba_map_sg()"))
{
sba_dump_sg(ioc, sglist, nents);
panic("Check after sba_map_sg()\n");
}
#endif
spin_unlock_irqrestore(&ioc->res_lock, flags);
ASSERT(coalesced == filled);
DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);
return filled;
}
/**
* sba_unmap_sg - unmap Scatter/Gather list
* @dev: instance of PCI owned by the driver that's asking.
* @sglist: array of buffer/length pairs
* @nents: number of entries in list
* @direction: R/W or both.
*
* See Documentation/DMA-mapping.txt
*/
void sba_unmap_sg(struct pci_dev *dev, struct scatterlist *sglist, int nents,
int direction)
{
struct ioc *ioc;
#ifdef ASSERT_PDIR_SANITY
unsigned long flags;
#endif
DBG_RUN_SG("%s() START %d entries, %p,%x\n",
__FUNCTION__, nents, sba_sg_buffer(sglist), sglist->length);
ioc = GET_IOC(dev);
ASSERT(ioc);
#ifdef CONFIG_PROC_FS
ioc->usg_calls++;
#endif
#ifdef ASSERT_PDIR_SANITY
spin_lock_irqsave(&ioc->res_lock, flags);
sba_check_pdir(ioc,"Check before sba_unmap_sg()");
spin_unlock_irqrestore(&ioc->res_lock, flags);
#endif
while (sba_sg_len(sglist) && nents--) {
sba_unmap_single(dev, (dma_addr_t)sba_sg_iova(sglist),
sba_sg_len(sglist), direction);
#ifdef CONFIG_PROC_FS
/*
** This leaves inconsistent data in the stats, but we can't
** tell which sg lists were mapped by map_single and which
** were coalesced to a single entry. The stats are fun,
** but speed is more important.
*/
ioc->usg_pages += (((u64)sba_sg_iova(sglist) & ~IOVP_MASK) + sba_sg_len(sglist) + IOVP_SIZE - 1) >> PAGE_SHIFT;
#endif
++sglist;
}
DBG_RUN_SG("%s() DONE (nents %d)\n", __FUNCTION__, nents);
#ifdef ASSERT_PDIR_SANITY
spin_lock_irqsave(&ioc->res_lock, flags);
sba_check_pdir(ioc,"Check after sba_unmap_sg()");
spin_unlock_irqrestore(&ioc->res_lock, flags);
#endif
}
unsigned long
sba_dma_address (struct scatterlist *sg)
{
return ((unsigned long)sba_sg_iova(sg));
}
/**************************************************************
*
* Initialization and claim
*
***************************************************************/
static void
sba_ioc_init(struct sba_device *sba_dev, struct ioc *ioc, int ioc_num)
{
u32 iova_space_size, iova_space_mask;
void * pdir_base;
int pdir_size, iov_order, tcnfg;
/*
** Firmware programs the maximum IOV space size into the imask reg
*/
iova_space_size = ~(READ_REG(ioc->ioc_hpa + IOC_IMASK) & 0xFFFFFFFFUL) + 1;
#ifdef CONFIG_IA64_HP_PROTO
if (!iova_space_size)
iova_space_size = GB(1);
#endif
/*
** iov_order is always based on a 1GB IOVA space since we want to
** turn on the other half for AGP GART.
*/
iov_order = get_order(iova_space_size >> (IOVP_SHIFT-PAGE_SHIFT));
ioc->pdir_size = pdir_size = (iova_space_size/IOVP_SIZE) * sizeof(u64);
DBG_INIT("%s() hpa 0x%lx IOV %dMB (%d bits) PDIR size 0x%0x\n",
__FUNCTION__, ioc->ioc_hpa, iova_space_size>>20,
iov_order + PAGE_SHIFT, ioc->pdir_size);
/* FIXME : DMA HINTs not used */
ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
ioc->hint_mask_pdir = ~(0x3 << (iov_order + PAGE_SHIFT));
ioc->pdir_base =
pdir_base = (void *) __get_free_pages(GFP_KERNEL, get_order(pdir_size));
if (NULL == pdir_base)
{
panic(__FILE__ ":%s() could not allocate I/O Page Table\n", __FUNCTION__);
}
memset(pdir_base, 0, pdir_size);
DBG_INIT("%s() pdir %p size %x hint_shift_pdir %x hint_mask_pdir %lx\n",
__FUNCTION__, pdir_base, pdir_size,
ioc->hint_shift_pdir, ioc->hint_mask_pdir);
ASSERT((((unsigned long) pdir_base) & PAGE_MASK) == (unsigned long) pdir_base);
WRITE_REG(virt_to_phys(pdir_base), ioc->ioc_hpa + IOC_PDIR_BASE);
DBG_INIT(" base %p\n", pdir_base);
/* build IMASK for IOC and Elroy */
iova_space_mask = 0xffffffff;
iova_space_mask <<= (iov_order + PAGE_SHIFT);
#ifdef CONFIG_IA64_HP_PROTO
/*
** REVISIT - this is a kludge, but we won't be supporting anything but
** zx1 2.0 or greater for real. When fw is in shape, ibase will
** be preprogrammed w/ the IOVA hole base and imask will give us
** the size.
*/
if ((sba_dev->hw_rev & 0xFF) < 0x20) {
DBG_INIT("%s() Found SBA rev < 2.0, setting IOVA base to 0. This device will not be supported in the future.\n", __FUNCTION__);
ioc->ibase = 0x0;
} else
#endif
ioc->ibase = READ_REG(ioc->ioc_hpa + IOC_IBASE) & 0xFFFFFFFEUL;
ioc->imask = iova_space_mask; /* save it */
DBG_INIT("%s() IOV base 0x%lx mask 0x%0lx\n",
__FUNCTION__, ioc->ibase, ioc->imask);
/*
** FIXME: Hint registers are programmed with default hint
** values during boot, so hints should be sane even if we
** can't reprogram them the way drivers want.
*/
WRITE_REG(ioc->imask, ioc->ioc_hpa+IOC_IMASK);
/*
** Setting the upper bits makes checking for bypass addresses
** a little faster later on.
*/
ioc->imask |= 0xFFFFFFFF00000000UL;
/* Set I/O PDIR Page size to system page size */
switch (PAGE_SHIFT) {
case 12: /* 4K */
tcnfg = 0;
break;
case 13: /* 8K */
tcnfg = 1;
break;
case 14: /* 16K */
tcnfg = 2;
break;
case 16: /* 64K */
tcnfg = 3;
break;
}
WRITE_REG(tcnfg, ioc->ioc_hpa+IOC_TCNFG);
/*
** Program the IOC's ibase and enable IOVA translation
** Bit zero == enable bit.
*/
WRITE_REG(ioc->ibase | 1, ioc->ioc_hpa+IOC_IBASE);
/*
** Clear I/O TLB of any possible entries.
** (Yes. This is a bit paranoid...but so what)
*/
WRITE_REG(0 | 31, ioc->ioc_hpa+IOC_PCOM);
/*
** If an AGP device is present, only use half of the IOV space
** for PCI DMA. Unfortunately we can't know ahead of time
** whether GART support will actually be used, for now we
** can just key on an AGP device found in the system.
** We program the next pdir index after we stop w/ a key for
** the GART code to handshake on.
*/
if (SBA_GET_AGP(sba_dev)) {
DBG_INIT("%s() AGP Device found, reserving 512MB for GART support\n", __FUNCTION__);
ioc->pdir_size /= 2;
((u64 *)pdir_base)[PDIR_INDEX(iova_space_size/2)] = 0x0000badbadc0ffeeULL;
}
DBG_INIT("%s() DONE\n", __FUNCTION__);
}
/**************************************************************************
**
** SBA initialization code (HW and SW)
**
** o identify SBA chip itself
** o FIXME: initialize DMA hints for reasonable defaults
**
**************************************************************************/
static void
sba_hw_init(struct sba_device *sba_dev)
{
int i;
int num_ioc;
u64 dma_mask;
u32 func_id;
/*
** Identify the SBA so we can set the dma_mask. We can make a virtual
** dma_mask of the memory subsystem such that devices not implmenting
** a full 64bit mask might still be able to bypass efficiently.
*/
func_id = READ_REG(sba_dev->sba_hpa + SBA_FUNC_ID);
if (func_id == ZX1_FUNC_ID_VALUE) {
dma_mask = 0xFFFFFFFFFFUL;
} else {
dma_mask = 0xFFFFFFFFFFFFFFFFUL;
}
DBG_INIT("%s(): ioc->dma_mask == 0x%lx\n", __FUNCTION__, dma_mask);
/*
** Leaving in the multiple ioc code from parisc for the future,
** currently there are no muli-ioc mckinley sbas
*/
sba_dev->ioc[0].ioc_hpa = SBA_IOC_OFFSET;
num_ioc = 1;
sba_dev->num_ioc = num_ioc;
for (i = 0; i < num_ioc; i++) {
sba_dev->ioc[i].dma_mask = dma_mask;
sba_dev->ioc[i].ioc_hpa += sba_dev->sba_hpa;
sba_ioc_init(sba_dev, &(sba_dev->ioc[i]), i);
}
}
static void
sba_common_init(struct sba_device *sba_dev)
{
int i;
/* add this one to the head of the list (order doesn't matter)
** This will be useful for debugging - especially if we get coredumps
*/
sba_dev->next = sba_list;
sba_list = sba_dev;
sba_count++;
for(i=0; i< sba_dev->num_ioc; i++) {
int res_size;
/* resource map size dictated by pdir_size */
res_size = sba_dev->ioc[i].pdir_size/sizeof(u64); /* entries */
res_size >>= 3; /* convert bit count to byte count */
DBG_INIT("%s() res_size 0x%x\n",
__FUNCTION__, res_size);
sba_dev->ioc[i].res_size = res_size;
sba_dev->ioc[i].res_map = (char *) __get_free_pages(GFP_KERNEL, get_order(res_size));
if (NULL == sba_dev->ioc[i].res_map)
{
panic(__FILE__ ":%s() could not allocate resource map\n", __FUNCTION__ );
}
memset(sba_dev->ioc[i].res_map, 0, res_size);
/* next available IOVP - circular search */
if ((sba_dev->hw_rev & 0xFF) >= 0x20) {
sba_dev->ioc[i].res_hint = (unsigned long *)
sba_dev->ioc[i].res_map;
} else {
u64 reserved_iov;
/* Yet another 1.x hack */
printk("zx1 1.x: Starting resource hint offset into IOV space to avoid initial zero value IOVA\n");
sba_dev->ioc[i].res_hint = (unsigned long *)
&(sba_dev->ioc[i].res_map[L1_CACHE_BYTES]);
sba_dev->ioc[i].res_map[0] = 0x1;
sba_dev->ioc[i].pdir_base[0] = 0x8000badbadc0ffeeULL;
for (reserved_iov = 0xA0000 ; reserved_iov < 0xC0000 ; reserved_iov += IOVP_SIZE) {
u64 *res_ptr = sba_dev->ioc[i].res_map;
int index = PDIR_INDEX(reserved_iov);
int res_word;
u64 mask;
res_word = (int)(index / BITS_PER_LONG);
mask = 0x1UL << (index - (res_word * BITS_PER_LONG));
res_ptr[res_word] |= mask;
sba_dev->ioc[i].pdir_base[PDIR_INDEX(reserved_iov)] = (0x80000000000000FFULL | reserved_iov);
}
}
#ifdef ASSERT_PDIR_SANITY
/* Mark first bit busy - ie no IOVA 0 */
sba_dev->ioc[i].res_map[0] = 0x1;
sba_dev->ioc[i].pdir_base[0] = 0x8000badbadc0ffeeULL;
#endif
DBG_INIT("%s() %d res_map %x %p\n", __FUNCTION__,
i, res_size, (void *)sba_dev->ioc[i].res_map);
}
sba_dev->sba_lock = SPIN_LOCK_UNLOCKED;
}
#ifdef CONFIG_PROC_FS
static int sba_proc_info(char *buf, char **start, off_t offset, int len)
{
struct sba_device *sba_dev = sba_list;
struct ioc *ioc = &sba_dev->ioc[0]; /* FIXME: Multi-IOC support! */
int total_pages = (int) (ioc->res_size << 3); /* 8 bits per byte */
unsigned long i = 0, avg = 0, min, max;
sprintf(buf, "%s rev %d.%d\n",
"Hewlett Packard zx1 SBA",
((sba_dev->hw_rev >> 4) & 0xF),
(sba_dev->hw_rev & 0xF)
);
sprintf(buf, "%sIO PDIR size : %d bytes (%d entries)\n",
buf,
(int) ((ioc->res_size << 3) * sizeof(u64)), /* 8 bits/byte */
total_pages);
sprintf(buf, "%sIO PDIR entries : %ld free %ld used (%d%%)\n", buf,
total_pages - ioc->used_pages, ioc->used_pages,
(int) (ioc->used_pages * 100 / total_pages));
sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n",
buf, ioc->res_size, ioc->res_size << 3); /* 8 bits per byte */
min = max = ioc->avg_search[0];
for (i = 0; i < SBA_SEARCH_SAMPLE; i++) {
avg += ioc->avg_search[i];
if (ioc->avg_search[i] > max) max = ioc->avg_search[i];
if (ioc->avg_search[i] < min) min = ioc->avg_search[i];
}
avg /= SBA_SEARCH_SAMPLE;
sprintf(buf, "%s Bitmap search : %ld/%ld/%ld (min/avg/max CPU Cycles)\n",
buf, min, avg, max);
sprintf(buf, "%spci_map_single(): %12ld calls %12ld pages (avg %d/1000)\n",
buf, ioc->msingle_calls, ioc->msingle_pages,
(int) ((ioc->msingle_pages * 1000)/ioc->msingle_calls));
#ifdef ALLOW_IOV_BYPASS
sprintf(buf, "%spci_map_single(): %12ld bypasses\n",
buf, ioc->msingle_bypass);
#endif
sprintf(buf, "%spci_unmap_single: %12ld calls %12ld pages (avg %d/1000)\n",
buf, ioc->usingle_calls, ioc->usingle_pages,
(int) ((ioc->usingle_pages * 1000)/ioc->usingle_calls));
#ifdef ALLOW_IOV_BYPASS
sprintf(buf, "%spci_unmap_single: %12ld bypasses\n",
buf, ioc->usingle_bypass);
#endif
sprintf(buf, "%spci_map_sg() : %12ld calls %12ld pages (avg %d/1000)\n",
buf, ioc->msg_calls, ioc->msg_pages,
(int) ((ioc->msg_pages * 1000)/ioc->msg_calls));
#ifdef ALLOW_IOV_BYPASS
sprintf(buf, "%spci_map_sg() : %12ld bypasses\n",
buf, ioc->msg_bypass);
#endif
sprintf(buf, "%spci_unmap_sg() : %12ld calls %12ld pages (avg %d/1000)\n",
buf, ioc->usg_calls, ioc->usg_pages,
(int) ((ioc->usg_pages * 1000)/ioc->usg_calls));
return strlen(buf);
}
static int
sba_resource_map(char *buf, char **start, off_t offset, int len)
{
struct ioc *ioc = sba_list->ioc; /* FIXME: Multi-IOC support! */
unsigned int *res_ptr = (unsigned int *)ioc->res_map;
int i;
buf[0] = '\0';
for(i = 0; i < (ioc->res_size / sizeof(unsigned int)); ++i, ++res_ptr) {
if ((i & 7) == 0)
strcat(buf,"\n ");
sprintf(buf, "%s %08x", buf, *res_ptr);
}
strcat(buf, "\n");
return strlen(buf);
}
#endif
/*
** Determine if sba should claim this chip (return 0) or not (return 1).
** If so, initialize the chip and tell other partners in crime they
** have work to do.
*/
void __init sba_init(void)
{
struct sba_device *sba_dev;
u32 func_id, hw_rev;
u32 *func_offset = NULL;
int i, agp_found = 0;
static char sba_rev[6];
struct pci_dev *device = NULL;
u64 hpa = 0;
if (!(device = pci_find_device(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_ZX1_SBA, NULL)))
return;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
if (pci_resource_flags(device, i) == IORESOURCE_MEM) {
hpa = ioremap(pci_resource_start(device, i),
pci_resource_len(device, i));
break;
}
}
func_id = READ_REG(hpa + SBA_FUNC_ID);
if (func_id == ZX1_FUNC_ID_VALUE) {
(void)strcpy(sba_rev, "zx1");
func_offset = zx1_func_offsets;
} else {
return;
}
/* Read HW Rev First */
hw_rev = READ_REG(hpa + SBA_FCLASS) & 0xFFUL;
/*
* Not all revision registers of the chipset are updated on every
* turn. Must scan through all functions looking for the highest rev
*/
if (func_offset) {
for (i = 0 ; func_offset[i] != -1 ; i++) {
u32 func_rev;
func_rev = READ_REG(hpa + SBA_FCLASS + func_offset[i]) & 0xFFUL;
DBG_INIT("%s() func offset: 0x%x rev: 0x%x\n",
__FUNCTION__, func_offset[i], func_rev);
if (func_rev > hw_rev)
hw_rev = func_rev;
}
}
printk(KERN_INFO "%s found %s %d.%d at %s, HPA 0x%lx\n", DRIVER_NAME,
sba_rev, ((hw_rev >> 4) & 0xF), (hw_rev & 0xF),
device->slot_name, hpa);
if ((hw_rev & 0xFF) < 0x20) {
printk(KERN_INFO "%s WARNING rev 2.0 or greater will be required for IO MMU support in the future\n", DRIVER_NAME);
#ifndef CONFIG_IA64_HP_PROTO
panic("%s: CONFIG_IA64_HP_PROTO MUST be enabled to support SBA rev less than 2.0", DRIVER_NAME);
#endif
}
sba_dev = kmalloc(sizeof(struct sba_device), GFP_KERNEL);
if (NULL == sba_dev) {
printk(KERN_ERR DRIVER_NAME " - couldn't alloc sba_device\n");
return;
}
memset(sba_dev, 0, sizeof(struct sba_device));
for(i=0; i<MAX_IOC; i++)
spin_lock_init(&(sba_dev->ioc[i].res_lock));
sba_dev->hw_rev = hw_rev;
sba_dev->sba_hpa = hpa;
/*
* We need to check for an AGP device, if we find one, then only
* use part of the IOVA space for PCI DMA, the rest is for GART.
* REVISIT for multiple IOC.
*/
pci_for_each_dev(device)
agp_found |= pci_find_capability(device, PCI_CAP_ID_AGP);
if (agp_found && reserve_sba_gart)
SBA_SET_AGP(sba_dev);
sba_hw_init(sba_dev);
sba_common_init(sba_dev);
#ifdef CONFIG_PROC_FS
{
struct proc_dir_entry * proc_mckinley_root;
proc_mckinley_root = proc_mkdir("bus/mckinley",0);
create_proc_info_entry(sba_rev, 0, proc_mckinley_root, sba_proc_info);
create_proc_info_entry("bitmap", 0, proc_mckinley_root, sba_resource_map);
}
#endif
}
static int __init
nosbagart (char *str)
{
reserve_sba_gart = 0;
return 1;
}
__setup("nosbagart",nosbagart);
EXPORT_SYMBOL(sba_init);
EXPORT_SYMBOL(sba_map_single);
EXPORT_SYMBOL(sba_unmap_single);
EXPORT_SYMBOL(sba_map_sg);
EXPORT_SYMBOL(sba_unmap_sg);
EXPORT_SYMBOL(sba_dma_address);
EXPORT_SYMBOL(sba_alloc_consistent);
EXPORT_SYMBOL(sba_free_consistent);
arch/ia64/hp/sim/Makefile
View file @ e19f970b
...@@ -11,3 +11,16 @@ obj-y := hpsim_console.o hpsim_irq.o hpsim_setup.o ...@@ -11,3 +11,16 @@ obj-y := hpsim_console.o hpsim_irq.o hpsim_setup.o
obj-$(CONFIG_IA64_GENERIC) += hpsim_machvec.o obj-$(CONFIG_IA64_GENERIC) += hpsim_machvec.o
include $(TOPDIR)/Rules.make include $(TOPDIR)/Rules.make
#
# ia64/platform/hp/sim/Makefile
#
# Copyright (C) 1999 Silicon Graphics, Inc.
# Copyright (C) Srinivasa Thirumalachar (sprasad@engr.sgi.com)
#
O_TARGET := sim.o
obj-y := hpsim_console.o hpsim_irq.o hpsim_setup.o
obj-$(CONFIG_IA64_GENERIC) += hpsim_machvec.o
include $(TOPDIR)/Rules.make
arch/ia64/hp/zx1/Makefile
View file @ e19f970b
...@@ -11,3 +11,16 @@ obj-y := hpzx1_misc.o ...@@ -11,3 +11,16 @@ obj-y := hpzx1_misc.o
obj-$(CONFIG_IA64_GENERIC) += hpzx1_machvec.o obj-$(CONFIG_IA64_GENERIC) += hpzx1_machvec.o
include $(TOPDIR)/Rules.make include $(TOPDIR)/Rules.make
#
# ia64/platform/hp/zx1/Makefile
#
# Copyright (C) 2002 Hewlett Packard
# Copyright (C) Alex Williamson (alex_williamson@hp.com)
#
O_TARGET := zx1.o
obj-y := hpzx1_misc.o
obj-$(CONFIG_IA64_GENERIC) += hpzx1_machvec.o
include $(TOPDIR)/Rules.make
arch/ia64/hp/zx1/hpzx1_machvec.c
View file @ e19f970b
#define MACHVEC_PLATFORM_NAME hpzx1 #define MACHVEC_PLATFORM_NAME hpzx1
#include <asm/machvec_init.h> #include <asm/machvec_init.h>
#define MACHVEC_PLATFORM_NAME hpzx1
#include <asm/machvec_init.h>
arch/ia64/hp/zx1/hpzx1_misc.c
View file @ e19f970b
...@@ -398,3 +398,403 @@ hpzx1_pci_fixup (int phase) ...@@ -398,3 +398,403 @@ hpzx1_pci_fixup (int phase)
if (phase == 1) if (phase == 1)
sba_init(); sba_init();
} }
/*
* Misc. support for HP zx1 chipset support
*
* Copyright (C) 2002 Hewlett-Packard Co
* Copyright (C) 2002 Alex Williamson <alex_williamson@hp.com>
* Copyright (C) 2002 Bjorn Helgaas <bjorn_helgaas@hp.com>
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/acpi.h>
#include <asm/iosapic.h>
#include <asm/efi.h>
#include "../drivers/acpi/include/platform/acgcc.h"
#include "../drivers/acpi/include/actypes.h"
#include "../drivers/acpi/include/acexcep.h"
#include "../drivers/acpi/include/acpixf.h"
#include "../drivers/acpi/include/actbl.h"
#include "../drivers/acpi/include/acconfig.h"
#include "../drivers/acpi/include/acmacros.h"
#include "../drivers/acpi/include/aclocal.h"
#include "../drivers/acpi/include/acobject.h"
#include "../drivers/acpi/include/acstruct.h"
#include "../drivers/acpi/include/acnamesp.h"
#include "../drivers/acpi/include/acutils.h"
#define PFX "hpzx1: "
struct fake_pci_dev {
struct fake_pci_dev *next;
unsigned char bus;
unsigned int devfn;
int sizing; // in middle of BAR sizing operation?
unsigned long csr_base;
unsigned int csr_size;
unsigned long mapped_csrs; // ioremapped
};
static struct fake_pci_dev *fake_pci_head, **fake_pci_tail = &fake_pci_head;
static struct pci_ops orig_pci_ops;
static inline struct fake_pci_dev *
fake_pci_find_slot(unsigned char bus, unsigned int devfn)
{
struct fake_pci_dev *dev;
for (dev = fake_pci_head; dev; dev = dev->next)
if (dev->bus == bus && dev->devfn == devfn)
return dev;
return NULL;
}
static struct fake_pci_dev *
alloc_fake_pci_dev(void)
{
struct fake_pci_dev *dev;
dev = kmalloc(sizeof(*dev), GFP_KERNEL);
if (!dev)
return NULL;
memset(dev, 0, sizeof(*dev));
*fake_pci_tail = dev;
fake_pci_tail = &dev->next;
return dev;
}
#define HP_CFG_RD(sz, bits, name) \
static int hp_cfg_read##sz (struct pci_dev *dev, int where, u##bits *value) \
{ \
struct fake_pci_dev *fake_dev; \
if (!(fake_dev = fake_pci_find_slot(dev->bus->number, dev->devfn))) \
return orig_pci_ops.name(dev, where, value); \
\
switch (where) { \
case PCI_COMMAND: \
*value = read##sz(fake_dev->mapped_csrs + where); \
*value |= PCI_COMMAND_MEMORY; /* SBA omits this */ \
break; \
case PCI_BASE_ADDRESS_0: \
if (fake_dev->sizing) \
*value = ~(fake_dev->csr_size - 1); \
else \
*value = (fake_dev->csr_base & \
PCI_BASE_ADDRESS_MEM_MASK) | \
PCI_BASE_ADDRESS_SPACE_MEMORY; \
fake_dev->sizing = 0; \
break; \
default: \
*value = read##sz(fake_dev->mapped_csrs + where); \
break; \
} \
return PCIBIOS_SUCCESSFUL; \
}
#define HP_CFG_WR(sz, bits, name) \
static int hp_cfg_write##sz (struct pci_dev *dev, int where, u##bits value) \
{ \
struct fake_pci_dev *fake_dev; \
if (!(fake_dev = fake_pci_find_slot(dev->bus->number, dev->devfn))) \
return orig_pci_ops.name(dev, where, value); \
\
switch (where) { \
case PCI_BASE_ADDRESS_0: \
if (value == ~0) \
fake_dev->sizing = 1; \
break; \
default: \
write##sz(value, fake_dev->mapped_csrs + where); \
break; \
} \
return PCIBIOS_SUCCESSFUL; \
}
HP_CFG_RD(b, 8, read_byte)
HP_CFG_RD(w, 16, read_word)
HP_CFG_RD(l, 32, read_dword)
HP_CFG_WR(b, 8, write_byte)
HP_CFG_WR(w, 16, write_word)
HP_CFG_WR(l, 32, write_dword)
static struct pci_ops hp_pci_conf = {
hp_cfg_readb,
hp_cfg_readw,
hp_cfg_readl,
hp_cfg_writeb,
hp_cfg_writew,
hp_cfg_writel,
};
/*
* Assume we'll never have a physical slot higher than 0x10, so we can
* use slots above that for "fake" PCI devices to represent things
* that only show up in the ACPI namespace.
*/
#define HP_MAX_SLOT 0x10
static struct fake_pci_dev *
hpzx1_fake_pci_dev(unsigned long addr, unsigned int bus, unsigned int size)
{
struct fake_pci_dev *dev;
int slot;
// Note: lspci thinks 0x1f is invalid
for (slot = 0x1e; slot > HP_MAX_SLOT; slot--) {
if (!fake_pci_find_slot(bus, PCI_DEVFN(slot, 0)))
break;
}
if (slot == HP_MAX_SLOT) {
printk(KERN_ERR PFX
"no slot space for device (0x%p) on bus 0x%02x\n",
(void *) addr, bus);
return NULL;
}
dev = alloc_fake_pci_dev();
if (!dev) {
printk(KERN_ERR PFX
"no memory for device (0x%p) on bus 0x%02x\n",
(void *) addr, bus);
return NULL;
}
dev->bus = bus;
dev->devfn = PCI_DEVFN(slot, 0);
dev->csr_base = addr;
dev->csr_size = size;
/*
* Drivers should ioremap what they need, but we have to do
* it here, too, so PCI config accesses work.
*/
dev->mapped_csrs = ioremap(dev->csr_base, dev->csr_size);
return dev;
}
typedef struct {
u8 guid_id;
u8 guid[16];
u8 csr_base[8];
u8 csr_length[8];
} acpi_hp_vendor_long;
#define HP_CCSR_LENGTH 0x21
#define HP_CCSR_TYPE 0x2
#define HP_CCSR_GUID \
((efi_guid_t) { 0x69e9adf9, 0x924f, 0xab5f, { 0xf6, 0x4a, 0x24, 0xd2, 0x01, 0x37, 0x0e, 0xad }})
extern acpi_status acpi_get_crs(acpi_handle, acpi_buffer *);
extern acpi_resource *acpi_get_crs_next(acpi_buffer *, int *);
extern acpi_resource_data *acpi_get_crs_type(acpi_buffer *, int *, int);
extern void acpi_dispose_crs(acpi_buffer *);
extern acpi_status acpi_cf_evaluate_method(acpi_handle, UINT8 *, NATIVE_UINT *);
static acpi_status
hp_csr_space(acpi_handle obj, u64 *csr_base, u64 *csr_length)
{
int i, offset = 0;
acpi_status status;
acpi_buffer buf;
acpi_resource_vendor *res;
acpi_hp_vendor_long *hp_res;
efi_guid_t vendor_guid;
*csr_base = 0;
*csr_length = 0;
status = acpi_get_crs(obj, &buf);
if (status != AE_OK) {
printk(KERN_ERR PFX "Unable to get _CRS data on object\n");
return status;
}
res = (acpi_resource_vendor *)acpi_get_crs_type(&buf, &offset, ACPI_RSTYPE_VENDOR);
if (!res) {
printk(KERN_ERR PFX "Failed to find config space for device\n");
acpi_dispose_crs(&buf);
return AE_NOT_FOUND;
}
hp_res = (acpi_hp_vendor_long *)(res->reserved);
if (res->length != HP_CCSR_LENGTH || hp_res->guid_id != HP_CCSR_TYPE) {
printk(KERN_ERR PFX "Unknown Vendor data\n");
acpi_dispose_crs(&buf);
return AE_TYPE; /* Revisit error? */
}
memcpy(&vendor_guid, hp_res->guid, sizeof(efi_guid_t));
if (efi_guidcmp(vendor_guid, HP_CCSR_GUID) != 0) {
printk(KERN_ERR PFX "Vendor GUID does not match\n");
acpi_dispose_crs(&buf);
return AE_TYPE; /* Revisit error? */
}
for (i = 0 ; i < 8 ; i++) {
*csr_base |= ((u64)(hp_res->csr_base[i]) << (i * 8));
*csr_length |= ((u64)(hp_res->csr_length[i]) << (i * 8));
}
acpi_dispose_crs(&buf);
return AE_OK;
}
static acpi_status
hpzx1_sba_probe(acpi_handle obj, u32 depth, void *context, void **ret)
{
u64 csr_base = 0, csr_length = 0;
char *name = context;
struct fake_pci_dev *dev;
acpi_status status;
status = hp_csr_space(obj, &csr_base, &csr_length);
if (status != AE_OK)
return status;
/*
* Only SBA shows up in ACPI namespace, so its CSR space
* includes both SBA and IOC. Make SBA and IOC show up
* separately in PCI space.
*/
if ((dev = hpzx1_fake_pci_dev(csr_base, 0, 0x1000)))
printk(KERN_INFO PFX "%s SBA at 0x%lx; pci dev %02x:%02x.%d\n",
name, csr_base, dev->bus,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
if ((dev = hpzx1_fake_pci_dev(csr_base + 0x1000, 0, 0x1000)))
printk(KERN_INFO PFX "%s IOC at 0x%lx; pci dev %02x:%02x.%d\n",
name, csr_base + 0x1000, dev->bus,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
return AE_OK;
}
static acpi_status
hpzx1_lba_probe(acpi_handle obj, u32 depth, void *context, void **ret)
{
acpi_status status;
u64 csr_base = 0, csr_length = 0;
char *name = context;
NATIVE_UINT busnum = 0;
struct fake_pci_dev *dev;
status = hp_csr_space(obj, &csr_base, &csr_length);
if (status != AE_OK)
return status;
status = acpi_cf_evaluate_method(obj, METHOD_NAME__BBN, &busnum);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR PFX "evaluate _BBN fail=0x%x\n", status);
busnum = 0; // no _BBN; stick it on bus 0
}
if ((dev = hpzx1_fake_pci_dev(csr_base, busnum, csr_length)))
printk(KERN_INFO PFX "%s LBA at 0x%lx, _BBN 0x%02x; "
"pci dev %02x:%02x.%d\n",
name, csr_base, busnum, dev->bus,
PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
return AE_OK;
}
static void
hpzx1_acpi_dev_init(void)
{
extern struct pci_ops pci_conf;
/*
* Make fake PCI devices for the following hardware in the
* ACPI namespace. This makes it more convenient for drivers
* because they can claim these devices based on PCI
* information, rather than needing to know about ACPI. The
* 64-bit "HPA" space for this hardware is available as BAR
* 0/1.
*
* HWP0001: Single IOC SBA w/o IOC in namespace
* HWP0002: LBA device
* HWP0003: AGP LBA device
*/
acpi_get_devices("HWP0001", hpzx1_sba_probe, "HWP0001", NULL);
#ifdef CONFIG_IA64_HP_PROTO
if (fake_pci_tail != &fake_pci_head) {
#endif
acpi_get_devices("HWP0002", hpzx1_lba_probe, "HWP0002", NULL);
acpi_get_devices("HWP0003", hpzx1_lba_probe, "HWP0003", NULL);
#ifdef CONFIG_IA64_HP_PROTO
}
#define ZX1_FUNC_ID_VALUE (PCI_DEVICE_ID_HP_ZX1_SBA << 16) | PCI_VENDOR_ID_HP
/*
* Early protos don't have bridges in the ACPI namespace, so
* if we didn't find anything, add the things we know are
* there.
*/
if (fake_pci_tail == &fake_pci_head) {
u64 hpa, csr_base;
struct fake_pci_dev *dev;
csr_base = 0xfed00000UL;
hpa = (u64) ioremap(csr_base, 0x1000);
if (__raw_readl(hpa) == ZX1_FUNC_ID_VALUE) {
if ((dev = hpzx1_fake_pci_dev(csr_base, 0, 0x1000)))
printk(KERN_INFO PFX "HWP0001 SBA at 0x%lx; "
"pci dev %02x:%02x.%d\n", csr_base,
dev->bus, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn));
if ((dev = hpzx1_fake_pci_dev(csr_base + 0x1000, 0,
0x1000)))
printk(KERN_INFO PFX "HWP0001 IOC at 0x%lx; "
"pci dev %02x:%02x.%d\n",
csr_base + 0x1000,
dev->bus, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn));
csr_base = 0xfed24000UL;
iounmap(hpa);
hpa = (u64) ioremap(csr_base, 0x1000);
if ((dev = hpzx1_fake_pci_dev(csr_base, 0x40, 0x1000)))
printk(KERN_INFO PFX "HWP0003 AGP LBA at "
"0x%lx; pci dev %02x:%02x.%d\n",
csr_base,
dev->bus, PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn));
}
iounmap(hpa);
}
#endif
if (fake_pci_tail == &fake_pci_head)
return;
/*
* Replace PCI ops, but only if we made fake devices.
*/
orig_pci_ops = pci_conf;
pci_conf = hp_pci_conf;
}
extern void sba_init(void);
void
hpzx1_pci_fixup (int phase)
{
if (phase == 0)
hpzx1_acpi_dev_init();
iosapic_pci_fixup(phase);
if (phase == 1)
sba_init();
}
arch/ia64/kernel/Makefile
View file @ e19f970b
...@@ -17,6 +17,7 @@ obj-y := acpi.o entry.o gate.o efi.o efi_stub.o ia64_ksyms.o irq.o irq_ia64.o ir ...@@ -17,6 +17,7 @@ obj-y := acpi.o entry.o gate.o efi.o efi_stub.o ia64_ksyms.o irq.o irq_ia64.o ir
machvec.o pal.o process.o perfmon.o ptrace.o sal.o semaphore.o setup.o \ machvec.o pal.o process.o perfmon.o ptrace.o sal.o semaphore.o setup.o \
signal.o sys_ia64.o traps.o time.o unaligned.o unwind.o signal.o sys_ia64.o traps.o time.o unaligned.o unwind.o
obj-$(CONFIG_IA64_GENERIC) += iosapic.o obj-$(CONFIG_IA64_GENERIC) += iosapic.o
obj-$(CONFIG_IA64_HP_ZX1) += iosapic.o
obj-$(CONFIG_IA64_DIG) += iosapic.o obj-$(CONFIG_IA64_DIG) += iosapic.o
obj-$(CONFIG_IA64_PALINFO) += palinfo.o obj-$(CONFIG_IA64_PALINFO) += palinfo.o
obj-$(CONFIG_EFI_VARS) += efivars.o obj-$(CONFIG_EFI_VARS) += efivars.o
......
arch/ia64/kernel/acpi.c
View file @ e19f970b
...@@ -23,6 +23,7 @@ ...@@ -23,6 +23,7 @@
#include <linux/string.h> #include <linux/string.h>
#include <linux/types.h> #include <linux/types.h>
#include <linux/irq.h> #include <linux/irq.h>
#include <linux/acpi.h>
#ifdef CONFIG_SERIAL_ACPI #ifdef CONFIG_SERIAL_ACPI
#include <linux/acpi_serial.h> #include <linux/acpi_serial.h>
#endif #endif
...@@ -58,9 +59,34 @@ asm (".weak iosapic_version"); ...@@ -58,9 +59,34 @@ asm (".weak iosapic_version");
const char * const char *
acpi_get_sysname (void) acpi_get_sysname (void)
{ {
/* the following should go away once we have an ACPI parser: */
#ifdef CONFIG_IA64_GENERIC #ifdef CONFIG_IA64_GENERIC
return "hpsim"; if (efi.acpi20) {
acpi20_rsdp_t *rsdp20;
acpi_xsdt_t *xsdt;
acpi_desc_table_hdr_t *hdrp;
rsdp20 = efi.acpi20;
if (strncmp(rsdp20->signature,
ACPI_RSDP_SIG, ACPI_RSDP_SIG_LEN)) {
printk("ACPI 2.0 RSDP signature incorrect, default to DIG compatible\n");
return "dig";
}
xsdt = __va(rsdp20->xsdt);
hdrp = &xsdt->header;
if (strncmp(hdrp->signature,
ACPI_XSDT_SIG, ACPI_XSDT_SIG_LEN)) {
printk("ACPI 2.0 XSDT signature incorrect, default to DIG compatible\n");
return "dig";
}
if (!strcmp(hdrp->oem_id, "HP")) {
printk("Enabling Hewlett Packard zx1 chipset support\n");
return "hpzx1";
}
}
return "dig";
#else #else
# if defined (CONFIG_IA64_HP_SIM) # if defined (CONFIG_IA64_HP_SIM)
return "hpsim"; return "hpsim";
...@@ -68,13 +94,14 @@ acpi_get_sysname (void) ...@@ -68,13 +94,14 @@ acpi_get_sysname (void)
return "sn1"; return "sn1";
# elif defined (CONFIG_IA64_SGI_SN2) # elif defined (CONFIG_IA64_SGI_SN2)
return "sn2"; return "sn2";
# elif defined (CONFIG_IA64_HP_ZX1)
return "hpzx1";
# elif defined (CONFIG_IA64_DIG) # elif defined (CONFIG_IA64_DIG)
return "dig"; return "dig";
# else # else
# error Unknown platform. Fix acpi.c. # error Unknown platform. Fix acpi.c.
# endif # endif
#endif #endif
} }
/* /*
...@@ -679,3 +706,74 @@ acpi_parse (acpi_rsdp_t *rsdp) ...@@ -679,3 +706,74 @@ acpi_parse (acpi_rsdp_t *rsdp)
# endif /* CONFIG_ACPI */ # endif /* CONFIG_ACPI */
return 1; return 1;
} }
#ifdef CONFIG_ACPI
#include "../drivers/acpi/include/platform/acgcc.h"
#include "../drivers/acpi/include/actypes.h"
#include "../drivers/acpi/include/acexcep.h"
#include "../drivers/acpi/include/acpixf.h"
#include "../drivers/acpi/include/actbl.h"
#include "../drivers/acpi/include/acconfig.h"
#include "../drivers/acpi/include/acmacros.h"
#include "../drivers/acpi/include/aclocal.h"
#include "../drivers/acpi/include/acobject.h"
#include "../drivers/acpi/include/acstruct.h"
#include "../drivers/acpi/include/acnamesp.h"
#include "../drivers/acpi/include/acutils.h"
/**
* acpi_get_crs - Return the current resource settings for a device
* obj: A handle for this device
* buf: A buffer to be populated by this call.
*
* Pass a valid handle, typically obtained by walking the namespace and a
* pointer to an allocated buffer, and this function will fill in the buffer
* with a list of acpi_resource structures.
*/
acpi_status acpi_get_crs(acpi_handle obj, acpi_buffer *buf)
{
acpi_status result;
buf->length = 0;
buf->pointer = NULL;
result = acpi_get_current_resources(obj, buf);
if (result != AE_BUFFER_OVERFLOW)
return result;
buf->pointer = kmalloc(buf->length, GFP_KERNEL);
if (!buf->pointer)
return -ENOMEM;
result = acpi_get_current_resources(obj, buf);
return result;
}
acpi_resource *acpi_get_crs_next(acpi_buffer *buf, int *offset)
{
acpi_resource *res;
if (*offset >= buf->length)
return NULL;
res = buf->pointer + *offset;
*offset += res->length;
return res;
}
acpi_resource_data *acpi_get_crs_type(acpi_buffer *buf, int *offset, int type)
{
for (;;) {
acpi_resource *res = acpi_get_crs_next(buf, offset);
if (!res)
return NULL;
if (res->id == type)
return &res->data;
}
}
void acpi_dispose_crs(acpi_buffer *buf)
{
kfree(buf->pointer);
}
#endif /* CONFIG_ACPI */
arch/ia64/kernel/ia64_ksyms.c
View file @ e19f970b
...@@ -148,3 +148,10 @@ EXPORT_SYMBOL(efi); ...@@ -148,3 +148,10 @@ EXPORT_SYMBOL(efi);
#include <linux/proc_fs.h> #include <linux/proc_fs.h>
extern struct proc_dir_entry *efi_dir; extern struct proc_dir_entry *efi_dir;
EXPORT_SYMBOL(efi_dir); EXPORT_SYMBOL(efi_dir);
#include <asm/machvec.h>
#ifdef CONFIG_IA64_GENERIC
EXPORT_SYMBOL(ia64_mv);
#endif
EXPORT_SYMBOL(machvec_noop);
arch/ia64/kernel/irq.c
View file @ e19f970b
...@@ -68,6 +68,23 @@ ...@@ -68,6 +68,23 @@
irq_desc_t _irq_desc[NR_IRQS] __cacheline_aligned = irq_desc_t _irq_desc[NR_IRQS] __cacheline_aligned =
{ [0 ... NR_IRQS-1] = { IRQ_DISABLED, &no_irq_type, NULL, 0, SPIN_LOCK_UNLOCKED}}; { [0 ... NR_IRQS-1] = { IRQ_DISABLED, &no_irq_type, NULL, 0, SPIN_LOCK_UNLOCKED}};
#ifdef CONFIG_IA64_GENERIC
struct irq_desc * __ia64_irq_desc (unsigned int irq)
{
return _irq_desc + irq;
}
ia64_vector __ia64_irq_to_vector (unsigned int irq)
{
return (ia64_vector) irq;
}
unsigned int __ia64_local_vector_to_irq (ia64_vector vec)
{
return (unsigned int) vec;
}
#endif
static void register_irq_proc (unsigned int irq); static void register_irq_proc (unsigned int irq);
/* /*
......
arch/ia64/kernel/setup.c
View file @ e19f970b
...@@ -64,6 +64,8 @@ struct screen_info screen_info; ...@@ -64,6 +64,8 @@ struct screen_info screen_info;
unsigned long ia64_iobase; /* virtual address for I/O accesses */ unsigned long ia64_iobase; /* virtual address for I/O accesses */
unsigned char aux_device_present = 0xaa; /* XXX remove this when legacy I/O is gone */
#define COMMAND_LINE_SIZE 512 #define COMMAND_LINE_SIZE 512
char saved_command_line[COMMAND_LINE_SIZE]; /* used in proc filesystem */ char saved_command_line[COMMAND_LINE_SIZE]; /* used in proc filesystem */
......
arch/ia64/mm/tlb.c
View file @ e19f970b
...@@ -79,7 +79,7 @@ wrap_mmu_context (struct mm_struct *mm) ...@@ -79,7 +79,7 @@ wrap_mmu_context (struct mm_struct *mm)
flush_tlb_all(); flush_tlb_all();
} }
static inline void void
ia64_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbits) ia64_global_tlb_purge (unsigned long start, unsigned long end, unsigned long nbits)
{ {
static spinlock_t ptcg_lock = SPIN_LOCK_UNLOCKED; static spinlock_t ptcg_lock = SPIN_LOCK_UNLOCKED;
......
drivers/pci/pci.ids
View file @ e19f970b
...@@ -930,6 +930,9 @@ ...@@ -930,6 +930,9 @@
121a NetServer SMIC Controller 121a NetServer SMIC Controller
121b NetServer Legacy COM Port Decoder 121b NetServer Legacy COM Port Decoder
121c NetServer PCI COM Port Decoder 121c NetServer PCI COM Port Decoder
1229 zx1 System Bus Adapter
122a zx1 I/O Controller
122e zx1 Local Bus Adapter
2910 E2910A 2910 E2910A
2925 E2925A 2925 E2925A
103e Solliday Engineering 103e Solliday Engineering
......
include/asm-ia64/hw_irq.h
View file @ e19f970b
...@@ -88,6 +88,7 @@ hw_resend_irq (struct hw_interrupt_type *h, unsigned int vector) ...@@ -88,6 +88,7 @@ hw_resend_irq (struct hw_interrupt_type *h, unsigned int vector)
extern struct irq_desc _irq_desc[NR_IRQS]; extern struct irq_desc _irq_desc[NR_IRQS];
#ifndef CONFIG_IA64_GENERIC
static inline struct irq_desc * static inline struct irq_desc *
__ia64_irq_desc (unsigned int irq) __ia64_irq_desc (unsigned int irq)
{ {
...@@ -105,6 +106,7 @@ __ia64_local_vector_to_irq (ia64_vector vec) ...@@ -105,6 +106,7 @@ __ia64_local_vector_to_irq (ia64_vector vec)
{ {
return (unsigned int) vec; return (unsigned int) vec;
} }
#endif
/* /*
* Next follows the irq descriptor interface. On IA-64, each CPU supports 256 interrupt * Next follows the irq descriptor interface. On IA-64, each CPU supports 256 interrupt
......
include/asm-ia64/machvec.h
View file @ e19f970b
...@@ -68,6 +68,8 @@ extern void machvec_noop (void); ...@@ -68,6 +68,8 @@ extern void machvec_noop (void);
# include <asm/machvec_hpsim.h> # include <asm/machvec_hpsim.h>
# elif defined (CONFIG_IA64_DIG) # elif defined (CONFIG_IA64_DIG)
# include <asm/machvec_dig.h> # include <asm/machvec_dig.h>
# elif defined (CONFIG_IA64_HP_ZX1)
# include <asm/machvec_hpzx1.h>
# elif defined (CONFIG_IA64_SGI_SN1) # elif defined (CONFIG_IA64_SGI_SN1)
# include <asm/machvec_sn1.h> # include <asm/machvec_sn1.h>
# elif defined (CONFIG_IA64_SGI_SN2) # elif defined (CONFIG_IA64_SGI_SN2)
...@@ -123,6 +125,7 @@ struct ia64_machine_vector { ...@@ -123,6 +125,7 @@ struct ia64_machine_vector {
ia64_mv_cmci_handler_t *cmci_handler; ia64_mv_cmci_handler_t *cmci_handler;
ia64_mv_log_print_t *log_print; ia64_mv_log_print_t *log_print;
ia64_mv_send_ipi_t *send_ipi; ia64_mv_send_ipi_t *send_ipi;
ia64_mv_global_tlb_purge_t *global_tlb_purge;
ia64_mv_pci_dma_init *dma_init; ia64_mv_pci_dma_init *dma_init;
ia64_mv_pci_alloc_consistent *alloc_consistent; ia64_mv_pci_alloc_consistent *alloc_consistent;
ia64_mv_pci_free_consistent *free_consistent; ia64_mv_pci_free_consistent *free_consistent;
...@@ -149,6 +152,7 @@ struct ia64_machine_vector { ...@@ -149,6 +152,7 @@ struct ia64_machine_vector {
{ \ { \
#name, \ #name, \
platform_setup, \ platform_setup, \
platform_cpu_init, \
platform_irq_init, \ platform_irq_init, \
platform_pci_fixup, \ platform_pci_fixup, \
platform_map_nr, \ platform_map_nr, \
......
include/asm-ia64/machvec_hpzx1.h
View file @ e19f970b
...@@ -35,3 +35,40 @@ extern ia64_mv_pci_dma_address sba_dma_address; ...@@ -35,3 +35,40 @@ extern ia64_mv_pci_dma_address sba_dma_address;
#define platform_pci_dma_address sba_dma_address #define platform_pci_dma_address sba_dma_address
#endif /* _ASM_IA64_MACHVEC_HPZX1_h */ #endif /* _ASM_IA64_MACHVEC_HPZX1_h */
#ifndef _ASM_IA64_MACHVEC_HPZX1_h
#define _ASM_IA64_MACHVEC_HPZX1_h
extern ia64_mv_setup_t dig_setup;
extern ia64_mv_pci_fixup_t hpzx1_pci_fixup;
extern ia64_mv_map_nr_t map_nr_dense;
extern ia64_mv_pci_alloc_consistent sba_alloc_consistent;
extern ia64_mv_pci_free_consistent sba_free_consistent;
extern ia64_mv_pci_map_single sba_map_single;
extern ia64_mv_pci_unmap_single sba_unmap_single;
extern ia64_mv_pci_map_sg sba_map_sg;
extern ia64_mv_pci_unmap_sg sba_unmap_sg;
extern ia64_mv_pci_dma_address sba_dma_address;
/*
* This stuff has dual use!
*
* For a generic kernel, the macros are used to initialize the
* platform's machvec structure. When compiling a non-generic kernel,
* the macros are used directly.
*/
#define platform_name "hpzx1"
#define platform_setup dig_setup
#define platform_pci_fixup hpzx1_pci_fixup
#define platform_map_nr map_nr_dense
#define platform_pci_dma_init ((ia64_mv_pci_dma_init *) machvec_noop)
#define platform_pci_alloc_consistent sba_alloc_consistent
#define platform_pci_free_consistent sba_free_consistent
#define platform_pci_map_single sba_map_single
#define platform_pci_unmap_single sba_unmap_single
#define platform_pci_map_sg sba_map_sg
#define platform_pci_unmap_sg sba_unmap_sg
#define platform_pci_dma_sync_single ((ia64_mv_pci_dma_sync_single *) machvec_noop)
#define platform_pci_dma_sync_sg ((ia64_mv_pci_dma_sync_sg *) machvec_noop)
#define platform_pci_dma_address sba_dma_address
#endif /* _ASM_IA64_MACHVEC_HPZX1_h */
include/asm-ia64/machvec_init.h
View file @ e19f970b
...@@ -5,6 +5,11 @@ ...@@ -5,6 +5,11 @@
#include <asm/machvec.h> #include <asm/machvec.h>
extern ia64_mv_send_ipi_t ia64_send_ipi; extern ia64_mv_send_ipi_t ia64_send_ipi;
extern ia64_mv_global_tlb_purge_t ia64_global_tlb_purge;
extern ia64_mv_irq_desc __ia64_irq_desc;
extern ia64_mv_irq_to_vector __ia64_irq_to_vector;
extern ia64_mv_local_vector_to_irq __ia64_local_vector_to_irq;
extern ia64_mv_inb_t __ia64_inb; extern ia64_mv_inb_t __ia64_inb;
extern ia64_mv_inw_t __ia64_inw; extern ia64_mv_inw_t __ia64_inw;
extern ia64_mv_inl_t __ia64_inl; extern ia64_mv_inl_t __ia64_inl;
......
include/linux/pci_ids.h
View file @ e19f970b
...@@ -507,6 +507,9 @@ ...@@ -507,6 +507,9 @@
#define PCI_DEVICE_ID_HP_DIVA1 0x1049 #define PCI_DEVICE_ID_HP_DIVA1 0x1049
#define PCI_DEVICE_ID_HP_DIVA2 0x104A #define PCI_DEVICE_ID_HP_DIVA2 0x104A
#define PCI_DEVICE_ID_HP_SP2_0 0x104B #define PCI_DEVICE_ID_HP_SP2_0 0x104B
#define PCI_DEVICE_ID_HP_ZX1_SBA 0x1229
#define PCI_DEVICE_ID_HP_ZX1_IOC 0x122a
#define PCI_DEVICE_ID_HP_ZX1_LBA 0x122e
#define PCI_VENDOR_ID_PCTECH 0x1042 #define PCI_VENDOR_ID_PCTECH 0x1042
#define PCI_DEVICE_ID_PCTECH_RZ1000 0x1000 #define PCI_DEVICE_ID_PCTECH_RZ1000 0x1000
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7